Viking PHK23BR Handle Installation Guide PDF

Download download
Viking PHK23BR Handle Installation Guide PDF
Viking Manual Viking Handle Manual Viking PHK23BR Manual Viking Handle Installation Guide
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Viking PHK23BR Handle Installation Guide PDF

Page 1

F20531 EN (062708J)

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Viking Installation Guide

PURHK23BR Professional Brass Handle Kit For Use with VURD Refrigerated Drawer

Page 2

IMPORTANTPlease Read and Follow!

2 3

Before beginning, please read these instructions completely and carefully. Use caution during assembly to minimize scratches. The installer should leave instructions with the customer who should retain for future

reference.

Parts Included Part Quantity

(1) (2) (1)

Professional Series Handle Handle End Caps Viking Self-Adhesive Logo Installation Instructions

To install brass handle assembly: 1. Assemble the handle and end caps as shown. The handle will fit tightly, but is not

intended to form permanent bond. 2. Position the handle assembly over the mounting studs. 3. Secure the end caps to the mounting studs by turning the set screw; do

not tighten. 4. Ensure that the door, end caps and handle are properly aligned. 5. Tighten set screws.

To apply the brass logo: 1. Mark the location of the new logo as shown. 2. Wipe the surface with alcohol and allow to dry. 3. Remove protective backing and apply the logo.

Handle & Logo Installation

Required Tools 3/32 Allen Wrench 2 Plastic Putty Knife

To remove factory-installed handle: 1. Locate and loosen set screws located on

each end cap. Set screws need only be loosened and do not have to be removed completely.

2. Carefully remove the handle assembly to expose mounting studs.

To remove factory-installed logo: 1. Apply acetone cleaner around the perimeter

of the logo. Wait 1 to 3 minutes to allow the cleaner to penetrate the adhesive.

2. Slowly pry the logo away from the door with the plastic putty knife. Do not use metal objects or excessive force as this could damage the surface of the door.

3. Once the logo and adhesive are removed, clean the surface with mild soap and water and dry thoroughly.

Handle & Logo Removal

Note: Two (2) kits are required to complete one refrigerated drawer unit. Follow same installation steps to install

Manualsnet FAQs

If you want to find out how the PHK23BR Viking works, you can view and download the Viking PHK23BR Handle Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Viking PHK23BR as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Viking PHK23BR. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Viking PHK23BR Handle Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Viking PHK23BR Handle Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Viking PHK23BR Handle Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Viking PHK23BR Handle Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking PHK23BR Handle Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.