Viking DDBRTGK72 Grille Installation Guide PDF

1 of 8
1 of 8

Summary of Content for Viking DDBRTGK72 Grille Installation Guide PDF

Viking Range, LLC

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-(845-4641)

or visit the our web site at

vikingrange.com in the US or

brigade.ca in Canada

F21023A EN (101513)

Installation Guide

Built-In Refrigeration Top Grille Installation (Dual Installation)

3

Grille Kit Components

2

NOTE: These instructions include information on how to remove the current grilles and re-install the grille kits. For information on dimensions, specifications and refrigerator installation, please refer to the Installation Guides included with the refrigerators.

1. Grille Assembly (1) 2. "Z" shaped side trim (1) 3. "J" shaped center trim (1) 4. Side trim screws (12) 5. Center trim screws (8)

1 2

Place both units in front of cutout. Pull the center grille louver up at an angle and pull out.

3 4

Using an 8 magnetic nut driver, remove the two 1/4 screws from each grille. Retain the screws

for installation of the new grille kit.

Remove grille assemblies.

Grille Removal

Side Trim Installation - Professional ModelsSide Trim Installation - Professional Models

Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed on the right side of the installation. Replace with the Z shaped side trim provided in the grille kit using the 12 screws included with the grille kit.

4

Cabinet Side Trim Z Shape

Cabinet Cabinet

Right Hand Door Unit Left Hand Door Unit

Anti-Tip Lag Bolts

2x4 mounting board fastened to wall at top of cabinet opening

Engage the right hand refrigerators left side trim into the J shaped portion of the left side refrigerators right side trim.

Finish unit installation according to installation instructions provided in each unit.

NOTE: Professional models ship with standard mount cabinet side trim attached to both sides. For standard installations, leave the cabinet side trims attached to the right side of the refrigerator to be installed on the right and the left side of the refrigerator to be installed on the left.

OR For flush installations, replace the cabinet side trims attached to the right side of the refrigerator to be installed on the right and left side of the refrigerator to be installed on the left with the flush mount side trim included in the boxes attached to the backs of the refrigerators. NOTE: Cutouts are different for standard and flush installations. Please refer to Installation Guide included with refrigerators for more complete dimension and specification information.

Left Hand Cabinet "Z" Side Trim

Centre Trim J Shape

5

76

Side Trim Installation - Custom Panel ModelsSide Trim Installation - Custom Panel Models

Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed on the right side of the installation. Replace with the Z shaped side trim provided in the grille kit using the 12 screws included with the grille kit.

Remove cabinet side trim mounted on the right side of the refrigerator to be installed on the left side of the installation. Replace with the J shaped side trim provided in the grille kit using the 8 screws included with the grille kit.

Cabinet Side Trim Z Shape

Cabinet Cabinet

Right Hand Door Unit Left Hand Door Unit

Anti-Tip Lag Bolts

2x4 mounting board fastened to wall at top of cabinet opening

Engage the right hand refrigerators left side trim into the J shaped portion of the left side refrigerators right side trim.

Finish unit installation according to installation instructions provided in each unit.

Left Hand Cabinet Side Trim

Cabinet Side Trim J Shape

98

Grille Assembly Install - Professional Models

Grille Assembly Bracket Placement - Professional Models

For 66 grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. See illustration below.

TOPUse this bracket if 36 W. product is on right side (facing unit), otherwise remove.

Use this bracket if 30 W. product is on left side (facing unit), otherwise remove.

Use this bracket if 30 W. product is on right side (facing unit), otherwise remove.

Use this bracket if 36 W. product is on left side (facing unit), otherwise remove.

*NOTE: Depending on unit configuration, two brackets should be removed and discarded. The 72 W. and 60 W. grille assemblies have all four (4) brackets mounted in the proper location.

66 Grille (back view)

Remove center grille blade by lifting up and pulling forward.

Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Grille Removal Section).

1110

Grille Assembly - Custom Panel Models On Custom Panel models, grill spacers from original unit grilles must be reused: Remove grille brackets from grille included in the grille kit by removing 4 screws on each

grille bracket located on the back of the grille assembly. Remove grille brackets and spacers from original unit grilles by removing 4 screws on each

grille bracket located on the back of each grille assembly. Install grille brackets and spacers from original unit grilles onto grille from the kit using the

original grille hardware. Important: The spacers must be oriented on the new grille the same way they were on the original grille. Also, remember to install the spacers on the corresponding side of the installation (if installing a unit on the left side of an installation, its grille spacers should be installed on the left side of the unified grille.)

Grille Assembly Bracket Placement - Custom Panel Models

For 66 grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. See illustration below.

TOPUse this bracket if 36 W. product is on right side (facing unit), otherwise remove.

Use this bracket if 30 W. product is on left side (facing unit), otherwise remove.

Use this bracket if 30 W. product is on right side (facing unit), otherwise remove.

Use this bracket if 36 W. product is on left side (facing unit), otherwise remove.

*NOTE: Depending on unit configuration, two brackets should be removed and discarded. The 72 W. and 60 W. grille assemblies have all four (4) brackets mounted in the proper location.

66 Custom Grille (back view)

1312

Grille Assembly Install - Custom Panel Models

Remove center grille blade by lifting up and pulling forward.

Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Gril

Manualsnet FAQs

If you want to find out how the DDBRTGK72 Viking works, you can view and download the Viking DDBRTGK72 Grille Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Viking DDBRTGK72 as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Viking DDBRTGK72. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Viking DDBRTGK72 Grille Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Viking DDBRTGK72 Grille Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Viking DDBRTGK72 Grille Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Viking DDBRTGK72 Grille Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking DDBRTGK72 Grille Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.