Viking PMF302TK Flush Installation Guide PDF

1 of 1
1 of 1

Summary of Content for Viking PMF302TK Flush Installation Guide PDF

@" Centerline to cutout 14-15/16" (379.71 mm)

@" Centerline to hole 14-5/16" (362.73 mm)

5/ 16

" ( 8.

77 m

m )

FIGURE 1 Side Spacer (2 required) Must protrude from edge of cabinet cutout towards center as shown.

(2) bottom spacers 24-5/8" width

1-9/16" height

FIGURE 2 Bottom Spacers (2 required).

FIGURE 3 Front of Cabinet

BUILT-IN TRIM KIT FLUSH MOUNTING TEMPLATE

FOR CUSTOM SERIES MICROWAVE OVEN

5/ 16

" ( 8.

77 m

m )

@" Cutout Opening Width 29-15/16" (759.42 mm)

CABINET CUTOUT LINE

FLOOR LINE OF CUTOUT OPENING

CENTER LINE C u

to u

t O

p en

in g

H ei

g h

t 19

-7 /8

" (5

04 m

m )

1" (25.4 mm)

VBA

1. Align the Flush Mounting Template center line with the center of the cabinet. Align the Floor Line with the bottom of the cabinet at the desired height. Tape it in place.

2. Cut the cabinet opening along the three Cabinet Cutout Lines and the Floor Line. 3. Install two Side Spacers (see FIGURE 1) and two Bottom Spacers (see FIGURE 2) as

specified in FIGURE 4. 4. Cut out the Side Spacer Templates (R and L) and align the indicated edge to the

corresponding Side Spacer (see FIGURE 3). Be careful to align the Floor Line to the bottom edges of the Side Spacers.

5. Predrill two holes indicated A in Side Spacer - R with a 1/16" drill bit. 6. Predrill two holes indicated B in Side Spacer - L with a 1/16" drill bit. 7. Remove template from the cabinet.

The exhaust duct should be aligned left to right with the left and right edges of the bottom spacer. The front edge of the exhaust duct should be recessed from the edge of the bottom spacer by 5 mm in order for the unit to be flush with the front surface of the trim kit. The exhaust duct should be secured to the bottom spacer with Screw (C).

1-15/16" (50.35 mm) 1-15/16" (49.9 mm)

22 -1

/1 6"

(5 61

.0 m

m )

24-5/8" (625.5 mm)

4"

4"

(1) Bottom Spacer

(2) Bottom Spacer

TOP VIEW

12 -1

/8 " (

30 8.

45 m

m )

FIGURE 4 Bottom Spacers centered with cabinet cutout

Edges to align Side Spacer Templates (R and L)

Side Spacer - L Side Spacer

Manualsnet FAQs

If you want to find out how the PMF302TK Viking works, you can view and download the Viking PMF302TK Flush Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Viking PMF302TK as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Viking PMF302TK. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Viking PMF302TK Flush Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Viking PMF302TK Flush Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Viking PMF302TK Flush Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Viking PMF302TK Flush Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking PMF302TK Flush Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.