Viking BQC030T3 Cart Planning Guide PDF
Summary of Content for Viking BQC030T3 Cart Planning Guide PDF
2 0 1 0 P L A N N I N G G U I D E
T A B L E O F C O N T E N T S
Outdoor SS Appliance Cabinet ID...............................................4-6
Outdoor SS Non-Appliance Cabinet ID..........................................6
Outdoor SS Cabinet Accessory ID...............................................7-8
Common Installations.................................................................9-14
Typical Kitchen Layout Packages.............................................15-25
Countertop Sizing Guidelines..................................................26-27
3
4
VQBO3021 VQBO4121 VQBO5322
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless
steel fully concealed door hinges Professional-style handles match Viking outdoor appliances drawers equipped with full extension slides optional toe kick included two-year limited warranty - door hinges and drawer slides lifetime limited warranty - all stainless steel components
*Note grill is not included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.
Model Approx. Shipping wt. lb (kg)
186 (84.4)
235 (106.6)
279 (126.6)
VQBO3021 (3014W. x 2978D. x 341/2H. grill base) - For use with any Viking 30W. outdoor T-Series or E-Series grill
VQBO4121 (4178W. x 2978D. x 341/2H. grill base) - For use with any Viking 41W. outdoor T-Series or E-Series grill
VQBO5322 (5378W x 2978D. x 341/2H. grill base) - For use with any Viking 53W. outdoor T-Series or E-Series grill
VQWO3010 VQWO4120 VQWO5311
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless
steel fully concealed door hinges Professional-style handles match Viking outdoor appliances drawers equipped with full extension slides optional toe kick included two-year limited warranty - door hinges and drawer slides lifetime limited warranty - all stainless steel components
*Note neither grill nor warming drawer is included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.
3 0 D . G R I L L B A S E W I T H W A R M I N G D R A W E R A C C E S S *
Model Approx. Shipping wt. lb (kg)
171 (77.6)
226 (102.5)
265 (120.2)
VQWO3010 (3014W. x 2978D. x 341/2H. grill base with warming drawer) For use with any Viking 30W. outdoor T-Series or E-Series grill and 30W. outdoor warming drawer access
VQWO4120 (4178W. x 2978D. x 341/2H. grill base with warming drawer) For use with any Viking 41W. outdoor T-Series or E-Series grill and 36W. outdoor warming drawer access
VQWO5311 (5378W. x 2978D. x 341/2H. grill base with warming drawer) For use with any Viking 53W. outdoor T-Series or E-Series grill and 36W. outdoor warming drawer access
3 0 D . G R I L L B A S E *
VBBO2602
5
VBBO1601
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless steel fully concealed door hinges Professional-style handles match Viking outdoor appliances heavy-duty adjustable legs optional toe kick included two-year limited warranty - door hinges lifetime limited warranty - all stainless steel components
*Note - neither the VGSB or VGIB burners are included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.
Model Approx. Shipping wt. lb (kg)
104 (47.2)VBBO1601 (1558W. x 2978D. x 3412H. side burner base) - For use with Viking outdoor double & infrared side burners
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless steel fully concealed door hinges Professional-style handles match Viking outdoor appliances heavy-duty adjustable legs optional toe kick included two-year limited warranty - door hinges lifetime limited warranty - all stainless steel components
*Note - no appliance is included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.
30D. WOK, REFRESHMENT STATION & 24W. TRUSEAR INFRARED GRILLER BASE*
Model Approx. Shipping wt. lb (kg)
160 (72.6)VBBO2602 (2638W. x 2978D. x 341/2H. multi-use base) - For use with Viking outdoor wok, 24W. refreshment center, 24W. griller, or 24W. side burner/rangetop
VURO2400
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless steel heavy-duty adjustable legs optional toe kick included lifetime limited warranty - all stainless steel components
*Note refrigeration units are not included and must be purchased separately
3 0 D . U N D E R C O U N T E R R E F R I G E R AT I O N B A S E (for use with 15W. & 24W. Viking outdoor refrigeration products)*
Model Approx. Shipping wt. lb (kg)
115 (52.2)
125 (56.7)
VURO2400 (24W. x 30D. x 341/2H. refrigeration base) - For use with Viking 15W. refrigeration products
VURO3200 (32W. x 30D. x 341/2H. refrigeration base) - For use with Viking 24W. refrigeration products
VURO3200
3 0 D . D O U B L E S I D E B U R N E R & T R U S E A R I N F R A R E D G R I L L E R B A S E *
6
VBO1811 VBO1830 VTPO1810VSBO2402 VSBO3602
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless
steel fully concealed door hinges Professional-style handles match Viking outdoor appliances heavy-duty adjustable legs optional toe kick included two-year limited warranty - door hinges lifetime limited warranty - all stainless steel components
* All cabinets must be installed with locally supplied countertop. Sink is not supplied with VSBO2402 or VSBO3602.
3 0 D . O U T D O O R S TA I N L E S S S T E E L B A S E C A B I N E T S *
Model Approx. Shipping wt. lb (kg)
141 (63.7)
156 (70.8)
165 (74.8)
180 (81.7)
145 (65.8)
VBO1811 (18W. x 2978D. x 341/2H. base cabinet) - For general use in cabinet runs
VBO1830 (18W. x 2978D. x 341/2H. base cabinet) - For general use in cabinet runs
VSBO2402 (24W. x 2978D. x 341/2H. sink base cabinet) - For general use in cabinet runs
VSBO3602 (36W. x 2978D. x 341/2H. sink base cabinet) - For general use in cabinet runs
VTPO1810 (18W. x 2978D. x 341/2H. trash pullout base cabinet) - For general use in cabinet runs
VERO3200VEUO3202
commercial-type construction, design and styling all cabinets are constructed completely of heavy-duty stainless
steel fully concealed door hinges Professional-style handles match Viking outdoor appliances heavy-duty adjustable legs optional toe kick included two-year limited warranty - door hinges lifetime limited warranty - all stainless steel components
*Note - ovens and refrigeration units are not included with the cabinet and must be purchased separately.
30D. ELECTRIC SMOKER OVEN & GAS OVEN TOWER WITH STORAGE OR REFRIGERATION ACCESS*
Model Approx. Shipping wt. lb (kg)
295 (133.8)
271 (122.9)
295 (133.8)
271 (122.9)
VEUO3202 (32W. x 2978D. x 68H. electric smoker oven tower with storage access) 30W. electric smoker oven cabinet
VERO3200 (32W. x 2978D. x 68H. electric smoker oven & 24W. outdoor refrigerated beverage center tower) 30W. electric smoker oven cabinet
VGUO3202 (32W. x 2978D. x 68H. gas oven tower with storage access) 26W. gas oven cabinet
VGRO3200 (32W. x 2978D. x 68H. gas oven & 24W. outdoor refrigerated beverage center tower) 26W. gas oven cabinet
VGRO3200VGUO3202
7
C A B I N E T S I D E PA N E L S
Approx. Shipping wt. lb (kg)
16 (7.3)
15 (6.8)
33 (14.9)
VSP30 (30W. x 29 3/4H. ) - To finish the side of any base cabinet at the end of a run
VTHP30 (30W. x 34H. ) - Half oven tower side panel. For use when countertop runs into the oven tower
VTSP30 (30W. x 68H. ) - Oven tower side panel for use at the end of a run
heavy-duty stainless steel used to finish sides of base cabinets at the end of the cabinet run fit flush into recessed sides of cabinets optional toe kick included
Model
F I L L E R S T R I P S
Model Approx. Shipping wt. lb (kg)
5 (2.3)
5 (2.3)
5 (2.3)
40 (18.1)
40 (18.1)
VCF90 (each side is 3W.) - Corner filler strip. For use in 90 cabinet bends
VCF135 (each side is 3W.) - Corner filler strip. For use in 135 cabinet bends
VFLR4 (4W.) - General filler strip used to separate appliance based cabinets
VOCF90 (each side is 4W.) - outer corner filler strip used to connect two back panels at a 90 angle and add countertop support. Shipped with two unattached back panels
VOCF135 (each side is 4W.) - outer corner filler strip used to connect two back panels at a 135 angle and add countertop support. Shipped with two unattached back panels
attach between cabinets to separate cabinets and create turns sides are to be mounted flush with doors and not the cabinet face optional toe kick included
VFLR4
8
Please see installation examples on page 11 for more information on when to use these.
heavy-duty stainless steel for use in custom island installations individual back panels for each Viking outdoor cabinet 34 thickness will add to the depth of the cabinetry optional toe kick included
V I K I N G B A C K PA N E L S F O R U S E I N C U S T O M I S L A N D A P P L I C AT I O N S
Model Approx. Shipping wt. lb (kg)
10 (3.7)
12 (5.4)
15 (6.8)
17 (7.7)
20 (9.1)
21 (9.5)
23 (10.4)
25 (11.3)
32 (14.5)
34 (15.4)
5 (2.3)
VBP16 (16W. back panel) For use with VBBO1601
VBP18 (18W. back panel) For use with VBO1811/VBO1830/VTPO1810
VBP24 (24W. back panel) For use with VSBO2402/VURO2400
VBP26 (26W. back panel) For use with VBBO2602
VBP30 (30W. back panel) For use with VQBO3021/VQWO3010
VBP32 (32W. back panel) For use with VURO3200
VBP36 (36W. back panel) For use with VSBO3602
VBP41 (41W. back panel) For use with VQBO4121/VQWO4120
VBP53 (53W. back panel) For use with VQBO5322/VQWO5311
VTBP32 (32W. x 68H back panel) For use with electric smoker and gas oven towers.
VBPFLR4 (4W. back panel) For use with VFLR4
VBP30
VQBO5322VBO1811 VBO1830
WALL OF HOUSE
V S P 3 0
VEUO3202
VBPFLR4 (stainless facing out)VBPFLR4 (stainless facing out)
V T
S P 3 0
VTHP30
9
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
Anticipate your requirements for your outdoor kitchen to get the most flexibility during its use. With a complete Viking outdoor kitchen, you now have not only the most complete line of outdoor appli- ances, but also the cabinets that provide the same storage and organizational capabilities of an indoor kitchen. Now you can prepare your appetizers, drinks and food outside while remaining part of the group, rather than having to go inside.
When planning the outdoor kitchen layout, consider the flow of people during outdoor cooking and entertaining as well as the flow from inside and outside the house. Since the kitchen is made up of individual cabinets, they can be arranged in virtually any combination allowing for true customiza- tion.
Common Installations (For actual assembly of individual cabinets, please refer to Viking installation instructions)
In General The cabinets have been designed to be easily installed by contractor or consumer. The cabinets are designed completely of stainless steel and provide a rich, contemporary look that complements Viking outdoor appliances. The cabinets are 341/2 high
where the toe kick area is 41/2. Locally supplied countertops must be mounted on top. The leveling legs on each cabinet allow for
adjustments on uneven surfaces. The leveling legs allow for a minimum adjustment of 341/4 and a maximum of 36. Typically, the
first cabinet is placed at the highest point and the other cabinets are leveled from there. To gain the most flexibility from the kitchen design, separate all appliances by at least one base cabinet or with available 4W. fillers (VFLR4). Remember to account for the 8 minimum the rotisserie motor requires for installation when placing cabinets next to a grill base. All cabinets are 30deep.
The cabinets can be installed against a house, a masonry, a stucco half-wall or freestanding in an island configuration. A stainless side panel (VSP30) is available to finish ends where a wall doesnt exist. Each cabinet is leveled using the attached leveling legs and then together. Choose a countertop material of 11/4 (like granite, quartz, etc.) or more (other stone, tile, etc.). If the countertop is
greater than 11/4 thick, you should use shims (not included) to install the appliance (grill, side burner, wok) flush to the countertop.
After the countertop is installed the appliances are placed in them and the kitchen is complete.
(Note: The full weight of the appliance must be set on the solid bottom support, including shims if necessary, and not supported by the countertop side trim.)
Against a non-combustible surface When installing a run of cabinets that includes a grill base against a non-combustible surface, the back of the cabinets should be at least 3 from the wall to insure meeting the grill specifications. When this is the case, a 4W. back panel (VBPFLR4) along with a 30 Side Panel (VSP30) can be used to finish the end of the cabinet run. The VBPFLR4 is screwed into the back of the cabinet that ends the run and matches up against the VSP30. As shown in the example below, there may be instances when an oven tower ends the cabinet run. When this is the case, a 30W./68H. side panel (VTSP30) will be used to end the run and a 30W./34H. half side panel (VTHP30) will be used on the side of the oven tower cabinet that the countertop runs into. All of the other cabinets are installed on either or both sides of the grill cabinet flush to its face.
10
Example: Against a non-combustible surface when refrigeration is used If any of the undercounter refrigeration products are installed in the cabinet run, either a VURO2400 or VURO3200 should be installed to allow for solid installation of the side panel and to make a strong base on which the countertop will sit. If the refrigeration falls in the end of a run a, 30W. side panel (VSP30) should be used. If used in conjunction with a Viking outdoor grill, a VBPFLR4 should be used along with the VSP30 to insure meeting grill specifications (see page 9 exam- ple).
VQBO4121
NON-COMBUSTIBLE
SURFACE
V S P 3 0
V S P 3 0
VBPFLR4 (stainless facing out)
15"W. OUTDOOR REFRIGERATION SLIDES IN
VURO2400 VBO1811
VBPFLR4 (stainless facing out)
VBO1830
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
11
Example: Island Installations The cabinets can also be installed in an island format. If desired, a half-wall can be built at the back and side panels (SP30) can be used to finish the sides. All the cabinets will be lined up flush at the face, or a 3-sided half-wall could be built to eliminate the side panels.
Alternatively, islands can be finished with Viking produced back panels. There are individual panels made to fit each indi- vidual cabinet offered by Viking. The result is a smooth, custom fit finish.
Example without oven cabinet ending run: Example with oven cabinet:
As shown in the example below, there may be instances when an oven tower ends the island cabinet run. When this is the case, a
2934W./68H. side panel (VTSP30) will be used to end the run and a 30W./34H. half side panel (VTHP30) will be used on the side of the oven tower cabinet that the countertop runs into. A 32W./68H. back panel (VTBP32) will also be used on the rear of the unit.
Example when refrigeration ends the run:
VBBO1601VBO1830
V SP30VBO1811VQBO3021VERO3200
VFLR4
V TS
P3 0
VTBP32
VTHP30
VBPFLR4*
V SP30VQWO3010
15"W. REF. PRODUCT SLIDES IN
V SP
30
24"W. REF. PRODUCT SLIDES IN
VBBO1601
VBP32 VBP16 VBPFLR4* VBP30 VBP24
VURO3200 VURO2400
VFLR4
VQBO5322VBO1811V S P 3 0
V S P 3 0
VSBO2402
VBP18 VBP53 VBP24
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
12
*Please note: If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel.
Installations Requiring a 4W. Filler Strip There are several situations where 4W. back panel (VBPFLR4) and back panels need to be used. The VLFR4 is a 4W., 3412H. (includes 412 toe kick area) stainless steel post sandwiched between two cabinets. 1) Use a 4W. filler whenever two Viking appliances are installed side-by-side in the run. This will give the appliances
ample room for any clearance issues they may have in their general specifications. Remember that 8 is required for proper installation of the rotisserie motor on a grill.
2) Use a 4W. back panel whenever a Viking outdoor grill is used in a layout against a non-combustible surface (such as a brick wall). The general specifications for the grill require 3 of space between the back of the grill and any non-combustible surface. The 4W. back panel accounts for this. (See sample drawing on page 9)
3) If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel. 4) Use the 4W. filler whenever extra room in your cabinet layout is desired.
Installations Requiring 90 and 135 Inner and Outer Filler Strips Many installations include a turn in the layout. These turns can follow a back wall, or they may exist in an island setting. If a layout such as this is designed, 90 or 135 degree filler strips will need to be used. IMPORTANT: When using a VCF90, do not install a warming drawer base cabinet directly adjacent to a VBO1830 or VTPO1810. The cabinet drawers will not be allowed to fully extend due to the warming drawer handle.
When to Use Inside Filler Strips by Themselves (see sample drawings below) Use a 90 (VCF90) or 135 (VCF135) inside filler whenever you have a 90 or 135 degree turn. If the layout is against a wall, no outer corner filler will be needed. The countertop will run into the wall. Your locally-supplied countertop installer will need to account for the void area underneath the countertop that falls in between the cabinets.
VBBO1601V S P 3 0
NON-COMBUSTIBLE SURFACE
VQBO3021
VCF90
V T
B P 3 2
V E R O
3 2 0 0
VTSP30
VBO1811
V B
O 1 8 1 1
VFLR4
N O
N -C
O M
B U
S T
IB L E S
U R
FA C
E
VBPFLR4 (stainless facing out)
VBPFLR4 (stainless facing out)
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
13
When to Use Inside and Outside Filler Strips Together (see sample drawing below) In situations where the back of your cabinet layout is exposed, such as in an island setting, inside and outside filler strips will need to be used. Use a 90 (VCF90) or 135 (VCF135) inside filler whenever you have a 90 or 135 degree turn. Depending on which turn you are accounting for, a 90 (VOCF90) or 135 (VOCF135) outer corner back panel assembly must be used to complete the layout. These assemblies consist of a 4W. stainless steel post, two mounting brackets, and two stainless steel back panels.
The post is placed in the middle corner of the void area (see diagram below) and the back panels are attached to it. The post gives support to the void area underneath the countertop that falls in between the cabinets. Next, the supplied brackets are attached to the inside of the two adjacent cabinets in the run. The stainless steel back panels are then attached to the brackets and fit flush with the back panels attached to the back of the cabinets to the right and left of the
VBBO1601V S P 3 0
VBP18
VQBO3021
VCF90
V B
P 1 8
VSP30
VSP30
VOCF90 VBO1811
V B
O 1 8 3 0
VBP16 VBPFLR4 VBP30 VOCF90 Back Panel
V O
C F 9 0 B
ack P
an e l
VFLR4
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
center post.
Example when using VCF135 and VOCF135 in an island setting:
The installation examples shown in this guide represent basic installations that may be encountered in common installations. Please contact Viking, your Viking Dealer or your Viking Distributor with any questions you might have regarding these or any other installations.
14
VBBO1601
V S P 3 0
VBP18
VQBO3021
VCF135
VBO1811
VBP16 VBPFLR4 VBP30
VOCF135
Back Panel
VBO 1830
VSP 30
VBP26
VBP18
VFLR4
VO C F135
Back Panel
VOCF135
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
15
A series of small, medium & large typical outdoor kitchen layouts, using the Viking stainless steel outdoor cabinetry product line.
T Y P I C A L K I T C H E N L AY O U T PA C K A G E S
16
11/4 thick countertop pieces
supplied by local source
Elevation View
1 VQWO4120 1 VURO2400 1 VTPO1810 2 VSP30 2 VBPFLR4
1 VQWO4120 1 VURO2400 1 VTPO1810 2 VSP30 1 VBP41 1 VBP24 1 VBP18
VQWO4120
NON-COMBUSTIBLE
SURFACE
V S P 3 0
V S P 3 0
VBPFLR4 (stainless facing out)
15"W. OUTDOOR REFRIGERATION SLIDES IN
VURO2400
VBPFLR4 (stainless facing out)
VTPO1810
4 Surface4
30
VQWO4120
V S P 3 0
V S P 3 0
15"W. OUTDOOR REFRIGERATION SLIDES IN
VURO2400
VBP18
VTPO1810
3/4
30
VBP41VBP24
Island Installation
Wall Installation
11/4
PA C K A G E 5 - 3 ( T H R E E C A B I N E T S )
341/2
17
11/4 thick countertop pieces supplied by local source
11/4
341/2
Elevation View
1 VQWO4120 1 VURO3200 1 VTPO1810 1 VBO1830 2 VSP30 2 VBPFLR4
1 VQWO4120 1 VURO3200 1 VTPO1810 1VBO1830 2 VSP30 1 VBP41 1 VBP32 2 VBP18
VQWO4120
NON-COMBUSTIBLE SURFACE
V SP
30
V SP30
VBPFLR4 (stainless facing out)
VURO3200
VBPFLR4 (stainless facing out)
VTPO1810
4 Surface4
30 VBO1830
24W. Outdoor Refrigeration slides in
VQWO4120
V SP
30
V SP30
VBP32
VURO3200VTPO1810 VBO1830
VBP41VBP18 VBP183/4
30
24W. Outdoor Refrigeration slides in
Island Installation
Wall Installation
PA C K A G E 5 - 4 ( F O U R C A B I N E T S )
18
11/4 thick countertop pieces supplied by local source
Elevation View
1 VQWO5311 1 VBO1830 1 VTPO1810 1 VSBO2402 1 VURO3200 2 VSP30 2 VBPFLR4
1 VQWO5311 1 VURO3200 1 VTPO1810 1 VBO1830 1 VSBO2402 2 VSP30 1 VBP53 1 VBP32 1 VBP24 2 VBP18
VQWO5311
NON-COMBUSTIBLE SURFACE
V S P 3 0
V S P 3 0
VBPFLR4 (stainless facing out)
VBO1830
VBPFLR4 (stainless facing out)
VTPO1810
4 Surface4
30 VURO3200
VSBO2402
24W. Outdoor Refrigeration slides in
VQWO5311
V S P 3 0
V S P 3 0VBO1830 VTPO1810 VURO3200
3/4
30
VBP18 VBP53 VBP18 VBP32 VBP24
VSBO2402
24W. Outdoor Refrigeration slides in
Island Installation
Wall Installation
11/4
341/2
PA C K A G E 5 - 5 ( F I V E C A B I N E T S )
19
11/4 thick countertop pieces supplied by local source
Elevation View
1 VQWO5311 1 VBO1830 1 VTPO1810 1 VSBO2402 1 VURO3200 1 VURO2400 2 VSP30 2 VBPFLR4
1 VBO1830 1 VSBO2402 1 VQWO5311 1 VURO2400 1 VTPO1810 1 VURO3200 2 VSP30 2 VBP18 2 VBP24 1 VBP32 1 VBP53
VQWO5311
NON-COMBUSTIBLE SURFACE
V S P 3 0
V S P 3 0
VBPFLR4 (stainless facing out)
VTPO1810
VBPFLR4 (stainless facing out)
VURO2400
4 Surface4
30 VURO3200VBO1830
VSBO2402
24W. Outdoor Refrigeration slides in15W. Outdoor Refrigeration slides in
VQWO5311
V S P 3 0
V S P 3 0VTPO1810 VURO2400 VURO3200VBO1830
3/4
30
VBP24 VBP18 VBP18 VBP53 VBP24 VBP32
VSBO2402
24W. Outdoor Refrigeration slides in15W. Outdoor Refrigeration slides in
Island Installation
Wall Installation
PA C K A G E 5 - 6 ( S I X C A B I N E T S )
11/4
341/2
20
11/4 thick countertop pieces supplied by local source
Elevation View
1 VURO3200 1 VSBO2402 1 VTPO1810 1 VQWO4120 1 VBBO1601 1 VBO1830 1 VEUO3202 1 VFLR4 1 VSP30 1 VTSP30 1 VTHP30 2 VBPFLR4
1 VURO3200 1 VSBO2402 1 VTPO1810 1 VQWO4120
VQWO4120
NON-COMBUSTIBLE SURFACE
V S P 3 0
V T
S P 3 0
VBPFLR4 (stainless facing out)
VBBO1601
VBPFLR4 (stainless facing out)
VBO1830
4
30 VEUO3202VURO3200 VTPO1810
4 Surface
VSBO2402
V T
H P 3 0
24W. outdoor refrigeration slides in VFLR4 (stainless facing out)
VQWO4120
V S P 3 0
V T
S P 3 0
VBBO1601 VBO1830 VEUO3202VURO3200 VTPO1810
VFLR4 (stainless facing out)
VBPFLR4
(stainless facing out) 3/4
30
VSBO2402
24W. outdoor refrigeration slides in
V T
H P 3 0
VBP32 VBP24 VBP18 VBP16 VBP41 VBP18 VBP32
Island Installation
Wall Installation
1 VBBO1601 1 VBO1830 1 VEUO3202 1 VSP30
1 VTSP30 1 VTHP30 1 VTBP32 1 VFLR4
2 VBP18 1 VBP16 1 VBP41 1 VBP32
1 VBP24
PA C K A G E 5 - 7 ( S E V E N C A B I N E T S )
11/4
341/2
21
11/4 thick countertop pieces supplied by local source
Elevation View
1 VURO3200 1 VSBO2402 1 VTPO1810 1 VQWO4120 1 VBBO1601 1 VBO1830 1 VFLR4 1 VSP30 1 VBPFLR4 1 VBP41 1 VBP32 2 VBP24 1 VBP26 1 VBP18 1 VCF90 1 VOCF90 1 VBPFLR4
Installation
PA C K A G E L - 8 ( E I G H T C A B I N E T S )
3/4
30
V Q
W O
4 1 2 0
VSP30
V B
B O
1 6 0 1
V T
P O
1 8 1 0
V F L R
4 (stain
le ss facin
g o u t)
V B
P F L R
4
VBB02602V S P 3 0
VCF90
V B
P 4 1
VOID AREA
VBP26 VBP18 VOCF90 Back Panel
V O
C F 9 0 B
ack P
an e l
V B
P 1 8
VBO1830
VBP24
VSBO2402
VBP24VBP32
VURO3200 VURO2400
11/4
341/2
22
PA C K A G E L - 9 ( N I N E C A B I N E T S )
11/4 thick countertop pieces supplied by local source
Elevation View
1 VGRO3200 1 VTPO1810 1 VSBO3602 2 VBO1830 1 VBBO2602 1 VBBO1601 1 VBO1811 1 VQWO5311 3 VSP30 1 VOCF90 1 VCF90 1 VBP26 2 VBP18 1 VBP16 1 VBP53 1 VTHP30 1 VTSP30 1 VFLR4 1 VBPFLR4 1 VTBP32
Installation
3/4
30
V B
B O
1 6 0 1
VSP30
V B
B O
2 6 0 2
V B
O 1 8 3 0
V F L R
4 (stain
le ss facin
g o u t)
V B
P F L R
4
VSBO3602
V T
S P 3 0
VCF90
V B
P 1 6
VOID AREA
VBP36 VBP18 VOCF90 Back Panel
V O
C F 9 0 B
ack P
an e l
V B
P 1 8
VBO1830
VBP18VTBP32
VGRO3200 VTPO1810
V B
P 2 6
VTHP30
VQWO5311
V S P 3 0
V S P 3 0
VBO1811
3/4
30
VBP53 VBP18
23
Plan and Elevations Graphic Symbols 38 = 1-0
VQBO3021 VQBO4121 VQBO5322
VQWO3010 VQWO4120 VQWO5311
30 5341
30 5341
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
30
30
41
30
53
30
30
30
53
30
41
30
VQWO3010 VQWO4120 VQWO5311
VQBO3021 VQBO4121 VQBO5322
24
Plan and Elevations Graphic Symbols 38 = 1-0
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
VBBO2602VBBO1601 VURO2400 VURO3200
16
30
VBBO1601
26
30
VBBO2602
24
30
VURO2400
32
30
VURO3200
VERO3200VEUO3202 VGRO3200VGUO3202
32
30
VEUO3202
32
30
VERO3200
32
30
VGUO3202
32
30
VGRO3200
25
Plan and Elevations Graphic Symbols 38 = 1-0
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
26
COUNTERTOP SIZ ING GUIDELINES FOR WALL INSTALLATIONS
While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:
1. Depth of counter, with a 34 nominal overhang, will be 34 34 when 4 fillers (VFLR4) are used against house walls. The depth will be 30 34 when no fillers are used. Note: Fillers must be used if a grill is installed in the cabinet run.
2. Notches in the countertop front edge (12 x 112) are required at all grill, side burner, and wok burner cutouts. 3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and
adding 34 for each end overhang, and 3/4 for each back panel (if a 90 layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.
4. Countertop thickness should be 114. Any thicker countertop will require that grills, wok burners and side burners be
shimmed (shims locally supplied), to install flush with the tops.
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C H E N
27
COUNTERTOP SIZ ING GUIDELINES FOR ISLAND INSTALLATIONS
While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:
1. Depth of counter, with a 34 nominal overhang, front and back, will be 32 14 2. Notches in the countertop front edge (12 x 112) are required at all grill, side burner, and wok burner cutouts. 3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and
adding 34 for each end overhang, and 3/4 for each back panel (if a 90 layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.
4. Countertop thickness should be 114. Any thicker countertop will require that grills, wok burners and side burners be
shimmed (shims locally supplied), to install flush with the tops.
P L A N N I N G Y O U R V I K I N G O U T D O O R K I T C
Related manuals for Viking BQC030T3 Cart Planning Guide
Manualsnet FAQs
If you want to find out how the BQC030T3 Viking works, you can view and download the Viking BQC030T3 Cart Planning Guide on the Manualsnet website.
Yes, we have the Planning Guide for Viking BQC030T3 as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Planning Guide should include all the details that are needed to use a Viking BQC030T3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Viking BQC030T3 Cart Planning Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Viking BQC030T3 Cart Planning Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Viking BQC030T3 Cart Planning Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Viking BQC030T3 Cart Planning Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking BQC030T3 Cart Planning Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.