Viking BQC300T3 Cart Installation Guide PDF

1 of 4
1 of 4

Summary of Content for Viking BQC300T3 Cart Installation Guide PDF

F20110C EN (040708J)

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Viking Installation Guide

Outdoor Gas Grill VGBQ T Series Cart Assembly

3

Attaching the grill to the cart Once the grill has been mounted on the cart, the back of the landing ledge should be flush with the front sides of the cart. The 5/8 (1.6 cm) hole on the top front corners of the cart should be aligned with the receiving holes in the grill heat shields. If your grill does not have the receiving holes in the heat shield, you will need to drill them out with a 9/64 (.14 cm) drill bit. With the grill and cart mounted together, place the drill bit in the 5/8 hole and center in the 1/4x3/8 slot. Drill through the heat shield. Take the #10X3/4 (1.9 cm) sheet metal screws (A) supplied with the cart and attach the cart sides to the grill. After securing the grill to the cart, snap the hole covers (B) supplied with the cart into the 5/8 (1.6 cm) holes in the cart corners.

support bracket screws

Shelf adjustment screw

Front View Supports

Leveling the Side Shelves To level the side shelves, lift the shelf so that the shelf adjustment screw is visible between the two supports on the shelf brackets. Turn the screw with a 3/32 (.2 cm) allen wrench counter clockwise to raise the shelf and clockwise to lower the shelf.

5/8 (1.6 cm) dia. hole

(A) #10X3/4 (1.9 cm) sheet metal screw

(B) 5/8 (1.6 cm) hole cover

BEFORE INSTALLING GRILL TO CART: Remove drip tray, grill grates, flavor grids, and warming racks from the grill.

IMPORTANT: PLEASE READ AND FOLLOW 1. Before beginning, please read these instructions completely and carefully. 2. Do not remove permanently affixed labels, warnings, or plates from product.

To mount grill to cart: Always wear gloves when handling the gas grill. Although the grill is deburred prior to shipment, some edges may still be sharp enough to cause injury during handling. With a minimum of two (2) people, place the grill in the cart with about 3 to 4 inches hanging out the front making sure that the male fitting on the bottom of the grill is inside the cart. Push the grill back until the front sides of the cart are flush with the back of the landing ledge on the grill. Be careful: the grill unit is very heavy!

To remove side shelves: The side shelves on the cart can be removed if needed. This must be done before installing the grill on the cart. With the shelf in the up position, remove the screws in the shelf support bracket. This will allow you to remove both the brackets and the shelf.

support bracket screws

2

5

CART DIMENSIONS

30 W. Cart - Front

30 W. Cart - Side

61 1/2 (156.2 cm)

38 3/4 (98.4 cm)

29 3/8 (75.6 cm)

36 1/2 (92.7 cm)

37 1/2 (95.3 cm)

30 1/16 (76.4 cm)

3/4 (1.9 cm)

3/4 (1.9 cm)

2 1/4 (5.7 cm)

30 (76.2 cm)

23 7/8 (60.6 cm)

Front of Cart

Cart Door Adjustment The cart doors come adjusted from the factory. Depending on how level the surface the cart is being placed on, the door(s) may need to be adjusted after teh grill is assembled on the cart.

There are two adjustment screws on the hinge receiver. 1) The front screw is used to center the door in the opening. Turning the front screws in or out will center the door in

the frame. 2) The back screw is used to align the front of the door with the cart frame and secure the door to the cart. Slightly

loosen the screw and slide the door in or out. Retighten the screw to secure the door.

Door Hinge (2 places)

Back Screw

Front Screw

4

41 W. and 53 W. Cart - Side

41 W. Cart - 45 7/8 (116.5 cm) 53 W. Cart - 43 1/16 (109.4 cm)

31 1/16 (78.9 cm)

28 9/16 (72.5 cm)

23 7/8 (60.6 cm)

37 5/8 (95.6 cm)

Manualsnet FAQs

If you want to find out how the BQC300T3 Viking works, you can view and download the Viking BQC300T3 Cart Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Viking BQC300T3 as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Viking BQC300T3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Viking BQC300T3 Cart Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Viking BQC300T3 Cart Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Viking BQC300T3 Cart Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Viking BQC300T3 Cart Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking BQC300T3 Cart Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.