Contents

Vauxhall Mokka 2020 Owner's Manual PDF

1 of 243
1 of 243

Summary of Content for Vauxhall Mokka 2020 Owner's Manual PDF

Introduction .................................... 2 Keys, doors and windows .............. 6 Seats, restraints ........................... 25 Storage ........................................ 45 Instruments and controls ............. 52 Lighting ........................................ 83 Climate control ............................. 92 Driving and operating ................. 102 Vehicle care ............................... 178 Service and maintenance .......... 215 Technical data ........................... 220 Customer information ................ 228 Index .......................................... 236

Contents

Emergency numbers

For emergency service call the Vauxhall Incident Manager

0800 55 33 88 (Free Linkline)*

Vauxhall Assistance General Enquiries 0845 7565 565

You will need to provide:

Vehicle registration number

Contact telephone number

Model and colour of your Vauxhall

Details of your precise location

* Calls may be chargeable from mobile phones

2 Introduction

Introduction

Introduction 3

Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. Please refer to the sections "Service and maintenance", "Technical data", the vehicles identification plate and national registration documents.

Introduction Your vehicle is a designed combination of advanced technology, safety, environmental friendliness and economy. This Owner's Manual provides you with all the necessary information to enable you to drive your vehicle safely and efficiently. Some functions are only operational when ignition is switched on, when combustion engine is running or when electric engine is ready. Make sure your passengers are aware of the possible risk of accident and injury which may result from improper use of the vehicle.

You must always comply with the specific laws and regulations of the country that you are in. These laws may differ from the information in this Owner's Manual. Disregarding the description given in this manual may affect your warranty. When this Owner's Manual refers to a workshop visit, we recommend your Vauxhall Authorised Repairer. All Vauxhall Authorised Repairers provide first-class service at reasonable prices. Experienced mechanics trained by Vauxhall work according to specific Vauxhall instructions. The customer literature pack should always be kept ready to hand in the vehicle.

Using this manual This manual describes all options

and features available for this model. Certain descriptions, including those for display and menu functions, may not apply to your vehicle due to model

variant, country specifications, special equipment or accessories.

The table of contents at the beginning of this manual and within each section shows where the information is located.

The index will enable you to search for specific information.

This Owner's Manual depicts left- hand drive vehicles. Operation is similar for right-hand drive vehicles.

The Owner's Manual uses the engine identifier code. The corresponding sales designation and engineering code can be found in the section "Technical data".

Directional data, e.g. left or right, or front or back, always relate to the direction of travel.

Displays may not support your specific language.

Display messages and interior labelling are written in bold letters.

4 Introduction

Danger, Warnings and Cautions

9 Danger

Text marked 9 Danger provides information on risk of fatal injury. Disregarding this information may endanger life.

9 Warning

Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury.

Caution

Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage.

Symbols Page references are indicated with 3. 3 means "see page". Page references and index entries refer to the indented headings given in the section table of content. Thank you for choosing a Vauxhall. We wish you many hours of pleasurable driving. Your Vauxhall Team

Introduction 5

6 Keys, doors and windows

Keys, doors and windows

Keys, locks ..................................... 6 Keys ............................................ 6 Radio remote control ................... 7 Electronic key system .................. 8 Central locking system ................ 9 Automatic locking ...................... 14 Child locks ................................. 15

Doors ........................................... 16 Load compartment .................... 16

Vehicle security ............................ 17 Anti-theft locking system ........... 17 Anti-theft alarm system .............. 18 Immobiliser ................................ 19

Exterior mirrors ............................ 20 Convex shape ........................... 20 Electric adjustment .................... 20 Folding mirrors .......................... 20 Heated mirrors ........................... 21

Interior mirrors ............................. 21 Manual anti-dazzle .................... 21 Automatic anti-dazzle ................ 22

Windows ...................................... 22 Windscreen ............................... 22

Power windows ......................... 22 Heated rear window .................. 24 Sun visors .................................. 24 Roller blinds ............................... 24

Keys, locks Keys

Caution

Do not attach heavy or bulky items to the ignition key.

9 Danger

Never remove the key from ignition switch during driving as this will cause steering wheel lock.

Replacement keys The key number is specified on a detachable tag. The key number must be quoted when ordering replacement keys as it is a component of the immobiliser system. Locks 3 211. Central locking 3 9. Starting the engine 3 106. Radio remote control 3 7.

Keys, doors and windows 7

Electronic key 3 8. The code number of the adapter for the locking wheel nuts is specified on a card. It must be quoted when ordering a replacement adapter. Wheel changing 3 203.

Key with foldaway key section

Press button to extend. To fold the key, first press the button.

Lock cylinders Designed to free-wheel if they are forcefully rotated without the correct key or if the correct key is not fully inserted. To reset, turn cylinder with

the correct key until its slot is vertical, remove key then re-insert it. If the cylinder still free-wheels, turn the key through 180 and repeat operation.

Radio remote control

a : unlocks the vehicle b : locks the vehicle ? : long press unlocks and

opens the tailgate

Enables operation of the following functions via the use of the remote control buttons: central locking system 3 9 anti-theft locking system 3 17

anti-theft alarm system 3 18 tailgate unlocking power windows 3 22 mirrors folding 3 20 vehicle locator lighting 3 91

The remote control has a range of up to 50 m, but may also be much less due to external influences. The hazard warning flashers confirm operation. Handle with care, protect from moisture and high temperatures and avoid unnecessary operation.

Replacing battery in radio remote control Replace the battery as soon as the system no longer operates properly or the range is reduced. In the event of a discharged battery, C illuminates in the instrument cluster and a warning message is displayed in the Driver Information Centre. Driver Information Centre 3 79.

8 Keys, doors and windows

Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point.

1. Remove the back cover from the remote control.

2. Extract the flat battery from its location.

3. Replace battery with a battery of the same type. Pay attention to the installation position.

4. Clip the back cover in place.

Fault If the central locking system cannot be operated with the radio remote control, the cause may be one of the following: Fault in radio remote control. The battery voltage is too low. Overload of the central locking

system by operating at frequent intervals, the power supply is interrupted for a short time.

Interference from higher-power radio waves from other sources.

Manual unlocking 3 9.

Electronic key system

Enables a keyless operation of the following functions: central locking system 3 9 ignition switching on and starting

the engine 3 106 The electronic key simply needs to be on the driver's person. For reasons of security, the elctronic key may be equipped with a motion sensor. If so, starting of the vehicle is not possible when the electronic key has not been moved for a certain time. When trying to start the vehicle, a corresponding message appears in

Keys, doors and windows 9

the Driver Information Centre. Move the electronic key and try to start the vehicle again. Additionally, the electronic key includes the functionality of the radio remote control 3 7. Handle with care, protect from moisture and high temperatures and avoid unnecessary operation.

Replacing battery in electronic key Replace the battery as soon as the system no longer operates properly or the range is reduced. In the event of a discharged battery, C illuminates in the instrument cluster and a warning message is displayed in the Driver Information Centre. Driver Information Centre 3 79.

Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point.

1. Remove the back cover. 2. Extract the flat battery from its

location. 3. Replace battery with a battery of

the same type. Pay attention to the installation position.

4. Clip the back cover in place.

Fault If the central locking cannot be operated or the engine cannot be started, the cause may be one of the following: Fault in electronic key. Electronic key is out of reception

range. The battery voltage is too low. Overload of the central locking

system by operating at frequent intervals, the power supply is interrupted for a short time.

Interference from higher-power radio waves from other sources.

Interference from electronic devices such as smartphones or laptops.

To rectify the cause of the fault, change the position of the electronic key. Manual unlocking 3 9.

Central locking system Unlocks and locks doors, load compartment and fuel filler flap.

10 Keys, doors and windows

A pull on an interior door handle opens the respective door. Notice In the event of an accident in which airbags or belt pretensioners are deployed, the vehicle is automatically unlocked.

Remote control operation

Unlocking

Press a.

Notice A short time after unlocking the vehicle with the remote control, the doors are locked automatically if no door has been opened.

Unlocking mode can be set in the vehicle personalisation menu in the Info Display. Following settings are selectable: All doors, load compartment and

fuel filler flap will be unlocked by pressing a once.

Only the driver's door and fuel filler flap will be unlocked by pressing a once. To additionally unlock all doors and the load compartment, press a twice.

Select the relevant setting in the Vehicle personalisation. Vehicle personalisation 3 80.

Locking Close doors, load compartment and fuel filler flap.

Press b. If the vehicle is not closed properly, the central locking system will not work. Operation of the central locking system is confirmed by the hazard warning flashers.

Keys, doors and windows 11

Load compartment

Press and hold ? to unlock. Unlocking settings for the load compartment can be set in the vehicle personalisation: Only the load compartment will

be unlocked by pressing ? once.

All doors, load compartment and fuel filler flap will be unlocked by pressing ? once.

Depending on the chosen setting in the vehicle personalisation, the load compartment can be locked: by simply closing the opened

tailgate. by pressing b once on the

remote control with the tailgate closed.

Select the relevant setting in the vehicle personalisation. Vehicle personalisation 3 80. Unlocking the tailgate 3 16.

Confirmation Operation of the central locking system is confirmed by the hazard warning flashers and an audible chime.

Electronic key system operation The electronic key must be outside the vehicle, within a range of approx. 1 m of the relevant door side. This system allows automatic vehicle locking and unlocking simply by detection of the electronic key. The electronic key must be outside the vehicle.

Notice If the vehicle is not closed properly or the electronic key remains in the vehicle, locking will not be permitted. If the vehicle is equipped with an anti-theft alarm system, a warning chime sounds after a few seconds. Notice The electronic key may not operate if placed close to electronic devices such as mobile phones or laptop computers.

Zone 1: automatic locking on leaving the vehicle

Zone 2: automatic unlocking on approaching the vehicle

12 Keys, doors and windows

Notice If the electronic key remains for more than 15 minutes in zone 1, automatic unlocking is deactivated. Unlock the vehicle by pressing a or ? on the remote control or touch the sensor of the driver's door handle to unlock the vehicle. Automatic locking and unlocking is activated again. Notice A short time after automatic unlocking, the vehicle is relocked if no door has been opened. Notice If the ignition is switched off for more than 9 days or the vehicle battery has no sufficient charging, the automatic function is disabled. Press a or ? on the remote control or touch the sensor of the driver's door handle to unlock the vehicle. In the event that the ignition is switched off for more than 21 days, the only way to unlock the vehicle is by pressing a or ? on the remote control.

Unlocking / locking Unlocking / locking mode can be set in the vehicle personalisation menu in the Info Display. Following settings are selectable: Only the driver's door and fuel

filler flap will be unlocked / locked.

All doors, load compartment and fuel filler flap will be unlocked / locked.

Only the load compartment will be unlocked / locked.

Vehicle personalisation 3 80. Load compartment 3 16.

Operation with buttons on the electronic key

The central locking system can also be operated with the buttons on the electronic key. Press a or ? to unlock. Press b to lock. Remote control operation 3 9.

Keys, doors and windows 13

Driver's door handle

The central locking system can also be operated by touching on the sensor of the driver's door handle. Touch the sensor of the drivers's door handle to unlock or to lock.

Confirmation Operation of central locking system is confirmed by the hazard warning flashers.

Central locking button Locks or unlocks all doors, the load compartment and fuel filler flap from inside the passenger compartment.

Press b to lock. The LED in the button illuminates. Press b again to unlock. The LED in the button extinguishes.

Operation with the key in case of a central locking system fault In case of a fault, e.g. vehicle battery or remote control / electronic key battery is discharged, the front door can be locked or unlocked with the mechanical key.

Manual unlocking

Electronic key: push the latch to extract the integral key.

14 Keys, doors and windows

Manually unlock the left front door by inserting and turning the key in the lock cylinder. The other doors can be opened by pulling the interior handle. The load compartment and fuel filler flap will possibly not be unlocked. By switching on the ignition, the anti- theft locking system is deactivated.

Manual locking

Manually lock the front door by inserting and turning the key in the lock cylinder.

To lock the other doors, remove the black cover by using a key. Insert key carefully and move it to the inner side of the door without turning the key. Then, remove key and attach black cover again. Close the doors. The fuel filler flap and tailgate are possibly not locked.

Automatic locking Automatic locking after driving off This system allows automatic locking of the doors and tailgate as soon as the speed of the vehicle exceeds a certain speed. If one of the doors or the tailgate is open, the automatic central locking does not take place. This is signalled by the sound of the locks rebounding, accompanied by illumination of P in the instrument cluster, an audible signal and the display of an alert message.

Keys, doors and windows 15

This function can be activated or deactivated at any time. With the ignition on, press b until an audible signal starts and a corresponding message is displayed. The state of the system stays in memory when switching off the ignition.

Automatic relock after unlocking This feature automatically relocks the vehicle a short time after unlocking with the remote control or electronic key, provided vehicle has not been opened.

Child locks

9 Warning

Use the child locks whenever children are occupying the rear seats.

Mechanical child locks

Turn the red child lock in the rear door inwards to the horizontal position by using a key. The door cannot be opened from the inside. To deactivate, turn the child lock to the vertical position.

Electric child locks Remotely operated system to prevent opening of the rear doors via the interior door handles and the use of the rear power windows. Two versions are available.

Switching on

Press >. The LED in the button is illuminated, accompanied by a confirmation message. This LED remains illuminated until the child lock is switched off again. Or

16 Keys, doors and windows

Press g.

Switching off Press > again. The LED in the button is extinguished, accompanied by a confirmation message. Or Press g again. Power windows 3 22.

Doors Load compartment Tailgate

Opening

1. Press the tailgate button or press long ? on the radio remote control.

2. Open the tailgate.

Closing

Use the interior handle. Do not push the tailgate button whilst closing as this will open the tailgate again. Central locking system 3 9.

General hints for operating tailgate

9 Danger

Do not drive with the tailgate open or ajar, e.g. when transporting bulky objects, since toxic exhaust

Keys, doors and windows 17

gases, which cannot be seen or smelled, could enter the vehicle. This can cause unconsciousness and even death.

Caution

Before opening the tailgate, check overhead obstructions, e.g. a garage door, to avoid damage to the tailgate. Always check the moving area above and behind the tailgate.

Notice The installation of certain heavy accessories onto the tailgate may affect its ability to remain open. Notice At low outside temperatures the tailgate may not open fully by itself. In this case lift the tailgate manually to its normal end position.

Vehicle security Anti-theft locking system

9 Warning

Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside.

The system deadlocks all the doors. All doors must be closed otherwise the system cannot be activated. Unlocking the vehicle disables the mechanical anti-theft locking system. This is not possible with the central locking button.

Activating

Press b on the radio remote control or touch the sensor of the driver's door handle twice within 3 seconds.

18 Keys, doors and windows

Anti-theft alarm system The anti-theft alarm system is combined with the central locking system. It monitors: doors, tailgate, bonnet passenger compartment

including adjoining load compartment

vehicle inclination, e.g. if it is raised

ignition

Activation All doors, the load compartment and the engine compartment must be closed. The electronic key must not remain in the vehicle. The system is self-activated 45 seconds after locking the vehicle. If a door, the tailgate or the bonnet is not properly closed, the vehicle is not locked. However, the anti-theft alarm is self-activated after 45 seconds.

Notice The automatic vehicle locking function does not activate the anti- theft alarm system. To activate the anti-theft alarm system, lock the vehicle by using the radio remote control or by touching the sensor on the driver's door handle. Central locking system 3 9. Notice Changes to the vehicle interior such as the use of seat covers and open windows, could impair the function of passenger compartment monitoring.

Activation without monitoring of passenger compartment and vehicle inclination

Switch off the monitoring of passenger compartment and vehicle inclination when animals are being left in the vehicle, because of high volume ultrasonic signals or movements triggering the alarm. Also, switch off when the vehicle is on a ferry or train. 1. Close tailgate, bonnet, windows. 2. Switch off ignition and press !

within 10 seconds until the LED in the button ! illuminates.

Keys, doors and windows 19

3. Leave the vehicle and close the doors.

4. Activate the anti-theft alarm system.

Indication LED in the ! button flashes if the anti-theft alarm system is activated. The hazard warning lights illuminates for a few seconds.

Deactivation Unlocking the vehicle deactivates the anti-theft alarm system. The system is not deactivated by unlocking the front door with the key or with the central locking button in the passenger compartment.

Alarm When triggered, the alarm siren sounds and the hazard warning lights flash simultaneously. The number and duration of alarm signals are stipulated by legislation. The anti-theft alarm can be deactivated by pressing a or switching on the ignition.

A triggered alarm, which has not been interrupted by the driver, will be indicated by the LED in the button !. The LED will flash quickly the next time the vehicle is unlocked. If the vehicle battery has been reconnected (e.g. after maintenance work), wait for 10 minutes to restart the engine.

Fault If the LED in the button ! illuminates permanently when switching on the ignition, seek the assistance of a workshop.

Locking the vehicle without activation of the anti-theft alarm Lock the vehicle by locking the front door with the key.

Immobiliser The system is part of the ignition switch and checks whether the vehicle is allowed to be started with the key being used. The immobiliser is activated automatically.

Notice Radio Frequency Identification (RFID) tags may cause interference with the key. Do not have it placed near the key when starting the vehicle. Notice The immobiliser does not lock the doors. Always lock the vehicle after leaving it 3 9. Switch on the anti-theft alarm system 3 18.

Emergency operation of electronic key 3 104.

20 Keys, doors and windows

Exterior mirrors Convex shape The shape of the mirror makes objects appear smaller, which will affect the ability to estimate distances. Side blind spot alert 3 153.

Electric adjustment

Select the relevant exterior mirror by pushing C to the left or right. Then swivel the control to adjust the mirror.

Folding mirrors

For pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force. Reposition the mirror by applying slight pressure to the mirror housing.

Manual electric folding

Move C to the centre position. Pull C rearwards. Both exterior mirrors are folded. Pull C rearwards again. Both exterior mirrors return to their original position. If an electrically folded mirror is manually unfolded, pulling C rearwards will only unfold the other mirror electrically.

Keys, doors and windows 21

Automatic electric folding When the vehicle is unlocked, the mirrors swing to their normal mounting position. When the vehicle is locked, the mirrors are folded down. To enable or disable automatic folding of the exterior mirrors, consult a workshop.

Heated mirrors

Operated by pressing f. Heating is switched off automatically after a short time. Heated rear window 3 24.

Interior mirrors

To adjust the mirror, move the mirror housing in the desired direction.

Manual anti-dazzle

To reduce dazzle, adjust the lever on the underside of the mirror housing.

22 Keys, doors and windows

Automatic anti-dazzle

Dazzle from following vehicles is automatically reduced, when driving in the dark.

Windows Windscreen Windscreen stickers Do not attach stickers such as toll road stickers or similar on the windscreen in the area of the interior mirror. Otherwise the detection zone of the sensor and the view area of the camera in the mirror housing could be restricted.

Windscreen replacement

Caution

If the vehicle has a front-looking camera sensor for the driver assistance systems, it is very important that any windscreen replacement is performed accurately according to Vauxhall specifications. Otherwise, these systems may not work properly and there is a risk of unexpected behaviour and / or messages from these systems.

Power windows

9 Warning

Take care when operating the power windows. Risk of injury, particularly to children. If there are children on the rear seats, switch on the child safety system for the power windows. Keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move.

Keys, doors and windows 23

Operate the switch for the respective window by pushing to open or pulling to close. Pushing or pulling gently to the first detent: window moves up or down as long as the switch is operated. Pushing or pulling firmly to the second detent then releasing: window moves up or down automatically with safety function enabled. To stop movement, operate the switch once more in the same direction.

Safety function If the window glass encounters resistance of the window during automatic closing, it is immediately stopped and opened again.

Child safety system for rear windows

Press g to deactivate rear door power windows; the LED illuminates. To activate, press g again. Depending on version, additionally operation of electric child locks 3 15.

Closing windows from outside The windows can be closed remotely from outside the vehicle.

Press and hold b to close windows. If the windows are fully closed, the hazard warning lights will flash twice.

Overload If the windows are repeatedly operated within short intervals, the window operation is disabled for some time.

Initialising the power windows Activate the window electronics as follows: 1. Close doors. 2. Switch on ignition.

24 Keys, doors and windows

3. Open the window completely by using the switch.

4. Pull the switch repeatedly until the window is completely closed and keep pushing for additional 1 second. Note that the window closes only a few centimetres after each pull of the switch.

5. Repeat for each window.

Heated rear window Operated by pressing f together with heated exterior mirrors. Heating is switched off automatically after a short time. Depending on climate control system, f is located at a different position.

Heated mirrors 3 21.

Sun visors The sun visors can be folded down or swivelled to the side to prevent dazzling. If the sun visors have integral mirrors, the mirror covers should be closed when driving. A ticket holder is located on the backside of the sun visor.

Roller blinds

To reduce sunlight at the rear seats, pull the blind upwards using the grip and engage it at the top of the door frame.

Seats, restraints 25

Seats, restraints

Head restraints ............................ 25 Front seats ................................... 26

Seat position .............................. 26 Manual seat adjustment ............ 27 Power seat adjustment .............. 28 Armrest ...................................... 28 Heating ...................................... 29 Massage .................................... 29

Seat belts ..................................... 29 Three-point seat belt ................. 30

Airbag system .............................. 32 Front airbag system ................... 35 Side airbag system .................... 35 Curtain airbag system ............... 36 Airbag deactivation .................... 37

Child restraints ............................. 38 Child restraint systems .............. 38 Child restraint installation locations ................................... 42

Head restraints

Position

9 Warning

Only drive with the head restraint set to the proper position.

The upper edge of the head restraint should be at upper head level. If this is not possible for extremely tall people, set to highest position, and set to lowest position for small people.

Height adjustment

Head restraints on front seats

Pull the head restraint upwards or press the catch to release and push the head restraint downwards.

26 Seats, restraints

Head restraints on rear seats

Pull the head restraint upwards or press the catch to release and push the head restraint downwards.

Removal Press catch, pull the respective head restraint upwards and remove.

Front seats Seat position

9 Warning

Only drive with the seat correctly adjusted.

9 Warning

Never adjust seats while driving as they could move uncontrollably.

9 Danger

Do not sit closer than 25 cm to the steering wheel, to permit safe airbag deployment.

9 Warning

Never store any objects under the seats.

Sit with buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that legs are slightly angled when pressing the pedals. Slide the front passenger seat as far back as possible.

Set seat height high enough to have a clear field of vision on all sides and of all display instruments. There should be at least one hand of clearance between head and the roof frame. Your thighs should rest lightly on the seat without pressing into it.

Seats, restraints 27

Adjust the head restraint so that its upper edge is at upper head level.

Sit with shoulders as far back against the backrest as possible. Set the backrest rake so that it is possible to easily reach the steering wheel with arms slightly bent. Maintain contact between shoulders and the backrest when turning the steering wheel. Do not angle the backrest too far back. We recommend a maximum rake of approx. 25.

Adjust seat and steering wheel in a way that the wrist rests on top of the steering wheel while the arm is fully extended and shoulders are on the backrest.

Adjust the lumbar support so that it supports the natural shape of the spine.

Head restraint adjustment 3 25. Steering wheel adjustment 3 55.

Manual seat adjustment Drive only with engaged seats and backrests.

Longitudinal adjustment

Pull handle, slide seat, release handle. Try to move the seat back and forth to ensure that the seat is locked in place.

Backrest inclination

Turn handwheel. Do not lean on backrest when adjusting.

28 Seats, restraints

Seat height

Lever pumping motion up : seat higher down : seat lower

Power seat adjustment

9 Warning

Care must be taken when operating the power seats. There is a risk of injury, particularly for children. Objects could become trapped.

Keep a close watch on the seats when adjusting them. Vehicle passengers should be informed accordingly.

Lumbar support

Press * or '. * : more lumbar support ' : less lumbar support

Armrest

The armrest can be adjusted. Storage compartment 3 46.

Seats, restraints 29

Heating

Adjust heating to the desired setting by pressing " for the respective seat one or more times. The control indicator in the button indicates the setting. Prolonged use of the highest setting for people with sensitive skin is not recommended. Stop-start system 3 107.

Massage

Activate the back massage function by pressing K. The LED in the button illuminates to indicate activation. The massage function is activated for a period of 1 hour. During this time, massage is performed in six cycles with breaks in between. Pressing K once more deactivates massage function. The LED goes off. Stop-start system 3 107.

Seat belts

The seat belts are locked during heavy acceleration or deceleration of the vehicle, holding the occupants in the seat position. Therefore the risk of injury is considerably reduced. Seat belts are designed to be used by only one person at a time. Child restraint system 3 38. Periodically check all parts of the belt system for damage, soiling and proper functionality.

30 Seats, restraints

Have damaged components replaced. After an accident, have the seat belts and triggered belt pretensioners replaced by a workshop. Notice Make sure that the belts are not damaged by shoes or sharp-edged objects or are trapped. Prevent dirt from getting into the belt retractors. Notice Use the belt buckle inteded for the respective seat belt when fastening in order to ensure proper functionality.

Seat belt reminder Each seat is equipped with a seat belt reminder, indicated by a control indicator a for the respective seat in the roof console 3 69.

Belt force limiters Stress on the body is reduced by the gradual release of the belt during a collision.

Belt pretensioners In the event of a head-on, rear-end or side-on collision of a certain severity, the front seat belts and the outer rear seat belts are tightened.

9 Warning

Incorrect handling (e.g. removal or fitting of belts) can trigger the belt pretensioners.

Deployment of the belt pretensioners is indicated by continuous illumination of control indicator d 3 70. Triggered belt pretensioners must be replaced by a workshop. Belt pretensioners can only be triggered once. Notice Do not affix or install accessories or other objects that may interfere with the operation of the belt pretensioners. Do not make any modifications to belt pretensioner components as this will invalidate the operating permit of your vehicle.

Three-point seat belt Fasten

Withdraw the belt from the retractor, guide it untwisted across the body and insert the latch plate into the buckle. Make sure the belt fits tightly to the body while driving.

Seats, restraints 31

Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body.

9 Warning

The belt must not rest against hard or fragile objects in the pockets of your clothing.

Seat belt reminder a 3 69.

Unfasten

To release belt, press red button on belt buckle.

Using seat belts while pregnant

9 Warning

The lap belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen.

32 Seats, restraints

Airbag system The airbag system consists of a number of individual systems. When triggered, the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision.

9 Warning

The airbag system deploys in an explosive manner, repairs must be performed by skilled personnel only.

9 Warning

Adding accessories that change the vehicle's frame, bumper system, height, front end or side sheet metal, may keep the airbag system from working properly. The operation of the airbag system can also be affected by changing any parts of the front seats, seat belts, airbag sensing and diagnostic module, steering wheel,

instrument panel, inner door seals including the speakers, any of the airbag modules, ceiling or pillar trim, front sensors, side impact sensors or airbag wiring.

9 Warning

Keep the area in which the airbag inflates clear of obstructions.

Notice The airbag systems and belt pretensioner control electronics are located in the centre console area. Do not put any magnetic objects in this area. Do not affix any objects onto the airbag covers and do not cover them with other materials. Have damaged covers replaced by a workshop. Each airbag is triggered only once. Have deployed airbags replaced by a workshop. Furthermore, it may be necessary to have the steering wheel, the instrument panel, parts of the panelling, the door seals, handles and the seats replaced.

Do not make any modifications to the airbag system as this will invalidate the vehicle operating permit.

Control indicator v for airbag systems 3 70.

Child restraint systems on front passenger seat with airbag systems Warning according to ECE R94.03:

EN: NEVER use a rearward-facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it; DEATH or SERIOUS INJURY to the CHILD can occur.

Seats, restraints 33

DE: Nach hinten gerichtete Kindersitze NIEMALS auf einem Sitz verwenden, der durch einen davor befindlichen AKTIVEN AIRBAG geschtzt ist, da dies den TOD oder SCHWERE VERLETZUNGEN DES KINDES zur Folge haben kann. FR: NE JAMAIS utiliser un sige d'enfant orient vers l'arrire sur un sige protg par un COUSSIN GONFLABLE ACTIF plac devant lui, sous peine d'infliger des BLESSURES GRAVES, voire MORTELLES l'ENFANT. ES: NUNCA utilice un sistema de retencin infantil orientado hacia atrs en un asiento protegido por un AIRBAG FRONTAL ACTIVO. Peligro de MUERTE o LESIONES GRAVES para el NIO. RU: , , !

. NL: Gebruik NOOIT een achterwaarts gericht kinderzitje op een stoel met een ACTIEVE AIRBAG ervoor, om DODELIJK of ERNSTIG LETSEL van het KIND te voorkomen. DA: Brug ALDRIG en bagudvendt autostol p et forsde med AKTIV AIRBAG, BARNET kan komme i LIVSFARE eller komme ALVORLIGT TIL SKADE. SV: Anvnd ALDRIG en baktvnd barnstol p ett ste som skyddas med en framfrvarande AKTIV AIRBAG. DDSFALL eller ALLVARLIGA SKADOR kan drabba BARNET. FI: L KOSKAAN sijoita taaksepin suunnattua lasten turvaistuinta istuimelle, jonka edess on AKTIIVINEN TURVATYYNY, LAPSI VOI KUOLLA tai VAMMAUTUA VAKAVASTI. NO: Bakovervendt barnesikringsutstyr m ALDRI brukes p et sete med AKTIV KOLLISJONSPUTE foran, da det kan

fre til at BARNET utsettes for LIVSFARE og fare for ALVORLIGE SKADER. PT: NUNCA use um sistema de reteno para crianas voltado para trs num banco protegido com um AIRBAG ACTIVO na frente do mesmo, poder ocorrer a PERDA DE VIDA ou FERIMENTOS GRAVES na CRIANA. IT: Non usare mai un sistema di sicurezza per bambini rivolto all'indietro su un sedile protetto da AIRBAG ATTIVO di fronte ad esso: pericolo di MORTE o LESIONI GRAVI per il BAMBINO! EL: , . PL: NIE WOLNO montowa fotelika dziecicego zwrconego tyem do kierunku jazdy na fotelu, przed ktrym znajduje si WCZONA PODUSZKA POWIETRZNA. Niezastosowanie si do tego

34 Seats, restraints

zalecenia moe by przyczyn MIERCI lub POWANYCH OBRAE u DZIECKA. TR: Arkaya bakan bir ocuk emniyet sistemini KESNLKLE nnde bir AKTF HAVA YASTII ile korunmakta olan bir koltukta kullanmaynz. OCUK LEBLR veya AIR EKLDE YARALANABLR. UK: , , , . HU: SOHA ne hasznljon htrafel nz biztonsgi gyereklst ellrl AKTV LGZSKKAL vdett lsen, mert a GYERMEK HALLT vagy KOMOLY SRLST okozhatja. HR: NIKADA nemojte koristiti sustav zadravanja za djecu okrenut prema natrag na sjedalu s AKTIVNIM ZRANIM JASTUKOM ispred njega, to bi moglo dovesti do SMRTI ili OZBILJNJIH OZLJEDA za DIJETE.

SL: NIKOLI ne nameajte otrokega varnostnega sedea, obrnjenega v nasprotni smeri vonje, na sede z AKTIVNO ELNO ZRANO BLAZINO, saj pri tem obstaja nevarnost RESNIH ali SMRTNIH POKODB za OTROKA. SR: NIKADA ne koristiti bezbednosni sistem za decu u kome su deca okrenuta unazad na seditu sa AKTIVNIM VAZDUNIM JASTUKOM ispred sedita zato to DETE moe da NASTRADA ili da se TEKO POVREDI. MK: , . BG: , , , - .

RO: Nu utilizai NICIODAT un scaun pentru copil ndreptat spre partea din spate a mainii pe un scaun protejat de un AIRBAG ACTIV n faa sa; acest lucru poate duce la DECESUL sau VTMAREA GRAV a COPILULUI. CS: NIKDY nepouvejte dtsk zdrn systm instalovan proti smru jzdy na sedadle, kter je chrnno ped sedadlem AKTIVNM AIRBAGEM. Mohlo by dojt k VNMU PORANN nebo MRT DTTE. SK: NIKDY nepouvajte detsk sedaku otoen vzad na sedadle chrnenom AKTVNYM AIRBAGOM, pretoe me djs k SMRTI alebo VNYM ZRANENIAM DIEAA. LT: JOKIU BDU nemontuokite atgal atgrtos vaiko tvirtinimo sistemos sdynje, prie kuri rengta AKTYVI ORO PAGALV, nes VAIKAS GALI TI arba RIMTAI SUSIALOTI. LV: NEKD GADJUM neizmantojiet uz aizmuguri vrstu brnu sdeklti sdviet, kas tiek aizsargta ar ts priek uzstdtu

Seats, restraints 35

AKTVU DROBAS SPILVENU, jo pretj gadjum BRNS var gt SMAGAS TRAUMAS vai IET BOJ. ET: RGE kasutage tahapoole suunatud lapseturvaistet istmel, mille ees on AKTIIVSE TURVAPADJAGA kaitstud iste, sest see vib phjustada LAPSE SURMA vi TSISE VIGASTUSE. MT: QATT tua train gat-tfal li jares lejn in-naa ta wara fuq sit protett bAIRBAG ATTIV quddiemu; dan jista jikkawa l-MEWT jew RIEI SERJI lit-TFAL. GA: N hsid srian sbhilteachta linbh cil RIAMH ar shuochn a bhfuil mla aeir ag feidhmi os a chomhair. T baol BIS n GORT DONA don PHISTE ag baint leis. Beyond the warning required by ECE R94.02, for safety reasons a forward-facing child restraint system must only be used subject to the instructions and restrictions in the table 3 42. The airbag label is located on both sides of the front passenger sun visor. Airbag deactivation 3 37.

Front airbag system The front airbag system consists of one airbag in the steering wheel and one in the instrument panel on the front passenger side. These can be identified by the word AIRBAG. The front airbag system is triggered in the event of a front-end impact of a certain severity. The ignition must be switched on.

The inflated airbags cushion the impact, thereby reducing the risk of injury to the upper body and head of the front seat occupants considerably.

9 Warning

Optimum protection is only provided when the seat is in the proper position. Seat position 3 26. Fasten the seat belt correctly and engage securely. Only then is the airbag able to protect.

Side airbag system

36 Seats, restraints

The side airbag system consists of an airbag in each front seat backrest and in the rear outer seat backrests. This can be identified by the word AIRBAG. The side airbag system is triggered in the event of a side impact of a certain severity. The ignition must be switched on.

The inflated airbags cushion the impact, thereby reducing the risk of injury to the upper body and pelvis in the event of a side-on collision considerably.

Notice Only use protective seat covers that have been approved for the vehicle. Be careful not to cover the airbags.

Curtain airbag system The curtain airbag system consists of an airbag in the roof frame on each side. This can be identified by the word AIRBAG on the roof pillars. The curtain airbag system is triggered in the event of a side-on impact of a certain severity. The ignition must be switched on.

The inflated airbags cushion the impact, thereby reducing the risk of injury to the head in the event of a side-on impact considerably.

9 Warning

The hooks on the handles in the roof frame are only suitable for hanging up light articles of clothing, without coat hangers. Do not keep any items in these clothes.

Seats, restraints 37

Airbag deactivation The front passenger airbag system must be deactivated for child restraint system on the passenger seat according to the instructions in the table 3 42. The side airbag and curtain airbag systems, the belt pretensioners and all driver airbag systems will remain active.

The front passenger airbag system can be deactivated via a key- operated switch in the glovebox.

Use the ignition key to choose the position: OFF* : front passenger airbag is

deactivated and will not inflate in the event of a collision, control indicator OFF* illuminates continuously in the centre console.

ON : front passenger airbag is active.

Notice After turning the key-operated switch to position OFF *, keep on turning towards this position until key is removed.

9 Danger

Deactivate passenger airbag only in combination with the use of a child restraint system, subject to the instructions and restrictions in the table 3 42. Otherwise, there is a risk of fatal injury for a person occupying a seat with a deactivated front passenger airbag.

If the control indicator illuminates for approx. 60 seconds after the ignition is switched on, the front passenger airbag system will inflate in the event of a collision. If the control indicator * illuminates after the ignition is switched on, the front passenger airbag system is deactivated. It stays on while the airbag is deactivated. If both control indicators are illuminated at the same time, there is a system failure. The status of the system is not discernible, therefore no person is allowed to occupy the front passenger seat. Contact a workshop immediately.

38 Seats, restraints

Consult a workshop immediately if neither of the two control indicators are illuminated. Change status only when the vehicle is stopped with the ignition off. Status remains until the next change. Control indicator for airbag deactivation 3 70.

Child restraints Child restraint systems

9 Danger

If using a rear-facing child restraint system on the front passenger seat, the airbag system for the front passenger seat must be deactivated. This also applies to certain forward-facing child restraint systems as indicated in the tables 3 42.

Airbag deactivation 3 37. Airbag label 3 32. We recommend a child restraint system which is tailored specifically to the vehicle. For further information, contact your workshop. In case of any interference of the child restraint system with vehicle seat head restraint, adjust or remove the corresponding head restraint 3 25. When a child restraint system is being used, pay attention to the following usage and installation instructions

and also those supplied with the child restraint system. The given restrictions in the table refer to a test body, which is the maximum envelope of all existing child restraint systems. Make sure that the front seats do not interfere with the used child restraint system. Always comply with local or national regulations. In some countries, the use of child restraint systems is forbidden on certain seats. Only drive with the driver seat correctly adjusted 3 26. Child restraint systems can be fastened with: Three-point seat belt ISOFIX brackets Top-tether

Three-point seat belt Child restraint systems can be fastened by using a three-point seat belt. After fastening the child restraint system the seat belt has to be tightened.

Seats, restraints 39

ISOFIX brackets

Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX brackets. Specific vehicle ISOFIX child restraint system positions are marked in the ISOFIX table 3 42.

ISOFIX brackets are indicated by a label on the backrest. To get access to the ISOFIX brackets, first pull the zipper. When fastening ISOFIX child restraint systems on adjustable passenger seats, such as the front passenger seat, first incline the backrest as far as necessary backwards in order to get access to the ISOFIX brackets. After the proper fastening of the ISOFIX child restraint system, incline the backrest forward again. An i-Size child restraint system is an universal ISOFIX child restraint system according UN Regulation No. 129.

All i-Size child restraint systems can be used on any vehicle seat suitable for i-Size, i-Size table 3 42. Either a Top-tether strap or a support leg must be used in addition to the ISOFIX brackets.

i-Size child seats and vehicle seats with i-Size approval are marked with i-Size symbol, see illustration.

40 Seats, restraints

Top-tether anchors

Top-tether anchors are marked with the symbol t for a child seat.

In addition to the ISOFIX brackets, fasten the Top-tether strap to the Top-tether anchors. ISOFIX child restraint systems of universal category positions are marked in the table by IUF 3 42.

Selecting the right system The rear seats are the most convenient location to fasten a child restraint system. Children should travel facing rearwards in the vehicle as long as possible. This makes sure that the child's backbone, which is still very weak, is under less strain in the event of an accident. Do not use forward facing child restraint system at all seats when child's weight is below 13 kg. Suitable are child restraint systems that comply with valid UN ECE regulations. Check local laws and regulations for mandatory use of child restraint systems.

The following child restraints are recommended for the following weight classes: Group 0, Group 0+:

Maxi Cosi Cabriofix with or without ISOFIX base for children up to 13 kg

Group I: Duo Plus with ISOFIX and Top-tether for children from 9 kg to 18 kg

Group II, Group III: Kidfix XP with or without ISOFIX for children from 15 kg to 36 kg, Kidfix 2R with or without ISOFIX for children from 15 kg to 36 kg, for Kidfix 2R ensure that vehicle seat belt passes through secure guard. Graco Booster for children from 15 kg to 36 kg.

Ensure that the child restraint system to be installed is compatible with the vehicle type. Child seat at the front: Adjust the front passenger seat to the highest and fully back longitudinal position with the backrest straightened.

Seats, restraints 41

Child seat at the rear: Move the vehicle's front seat forward and straighten the backrest so that the legs of the child in the "forward facing or the "rearward facing" child seat do not touch the vehicle's front seat. In case of any interference of Child restraint system with vehicle seat head rest, adjust or remove the corresponding vehicle seat Head rest. Do not use forward facing child restraints system when child's weight is below 13 kg at all seats. Please follow Child restraint manufacturers instructions to install corresponding child restraints in vehicle. For semi-universal or vehicle specific child restraint system (ISOFIX or belted child restraint system), see the vehicle list provided in the user manual of the child restraint system. Ensure that the mounting location of the child restraint system within the vehicle is correct, see following table.

Allow children to enter and exit the vehicle only on the side facing away from the traffic. When the child restraint system is not in use, secure the seat with a seat belt or remove it from the vehicle. Notice Do not affix anything on the child restraint systems and do not cover them with any other materials. A child restraint system which has been subjected to stress in an accident must be replaced.

42 Seats, restraints

Child restraint installation locations Installation of universal, ISOFIX and i-Size child seats As required by European regulations, this table gives the options for installing child seats secured using the seat belt and universally approved as well as the larger ISOFIX and i-Size child seats on seat positions equipped with ISOFIX mountings in the vehicle. Yes : Suitable for fitment of the designated catecory of the child restraint system. No : Not suitable for fitment of the designated catecory of the child restraint system.

Child restraint system categories

Front passenger seat with activated airbag ON

Front passenger seat with deactivated airbag OFF

Rear outer seats

Rear centre seat 1)

Universal belted child restraint system 2)

Yes 3) 4) 5) Yes 4) 6) 7) Yes NO

i-size child restraint system Yes 3) 8) Yes 6) 8) Yes

Position equipped with a Top-tether fixing

Yes 3) 8) Yes 6) 8) Yes

Carry-cot (ISOFIX lateral facing child restraint system) ISOFIX child restraint fixture: L1, L2

NO NO NO

ISOFIX rearward facing child restraint system ISOFIX child restraint fixture: R1, R2

NO Yes 8) 9) 12) Yes 10) 11) 12)

Seats, restraints 43

Child restraint system categories

Front passenger seat with activated airbag ON

Front passenger seat with deactivated airbag OFF

Rear outer seats

Rear centre seat 1)

ISOFIX forward facing child restraint system ISOFIX child restraint fixture: F2, F2X, F3

Yes 8) 12) NO Yes 12)

ISOFIX rearward facing child restraint system ISOFIX child restraint fixture: R3

NO NO Yes 10) 11) 12)

Booster seat - reduced width: B2 Yes NO Yes NO

Booster seat - full width: B3 Yes NO Yes NO

1) Child restraint system installation is not allowed on rear centre seat. 2) Universal child seat: chiId seat that can be installed in all vehicles using the seat belt. Applies to all stature and mass groups. 3) Only forward facing child restraint system 4) For a seat with height adjustment, set it to the highest and fully back longitudinal position. 5) Only a forward facing child restraint system is authorised at this seat position with the front passenger's airbag activated ON. 6) Only rearward facing child restraint system 7) To install a rearward facing child restraint system at this seat position, the front passenger's airbag must be deactivated OFF. 8) Seats fitted with ISOFIX / i-Size compliant mountings. 9) The vehicle seat must be adjusted in the rearmost longitudinal position. 10) Adjust the driver seat ahead of the child restraint system to the longitudinal middle and maximum height position. If necessary, adjust

the driver's seat backrest angle. Ensure that inclination angle of the backrest does not exceed the corresponding torso angle of 15. 11) Move the passenger seat ahead of the child restraint system forwards as far as necessary. 12) In case of any interference of Child restraint system with vehicle seat head rest, adjust or remove the corresponding vehicle seat

head rest.

44 Seats, restraints

Size of child restraint fixture (1, 2, 3): R1 means rearward facing child restraint fixture for mass group 0 up to 10 kg and mass group 0+ up to 13 kg, age

around 0-1 year. R2 means reduced size of rearward facing child restraint fixture for mass group 0+ up to 13 kg and mass group 1

from 9 to 18 kg, age around 2-4 years. R3 means full size of rearward facing child restraint fixture for mass group 0+ up to 13 kg and mass group 1 from 9

to 18 kg, age around 2-4 years. F2, F2X mean reduced height of forward facing child restraint fixture for mass group 1 from 9 to 18 kg, age around

6-7 years. F3 means full height of forward facing child restraint fixture for mass group 1 from 9 to 18 kg, age around 7-10 years.

Storage 45

Storage

Storage compartments ................ 45 Glovebox ................................... 45 Cupholders ................................ 45 Door panel storage .................... 46 Centre console storage ............. 46

Load compartment ....................... 47 Load compartment cover ........... 48 Rear floor storage cover ............ 48 Lashing eyes ............................. 49 Warning triangle ........................ 49

Roof rack system ......................... 50 Roof rack ................................... 50

Loading information ..................... 50

Storage compartments

9 Warning

Do not store heavy or sharp objects in the storage compartments.

Glovebox

Pull lever to open the glovebox. The glovebox should be closed whilst driving.

Cupholders

Cupholders are located in the centre console.

46 Storage

Door panel storage

A storage compartment is located in the front and rear door panels.

Centre console storage

Slide armrest backwards, push button and fold upwards. Under the armrest there is a storage compartment.

A storage compartment is located in the centre console.

Storage 47

Load compartment The rear seat backrest is divided into 2/3 to 1/3 parts. Both parts can be folded down individually to increase the size of the load compartment. Before folding rear seat backrests, execute the following if necessary: Move front seats forward if

necessary. Remove the load compartment

cover 3 48. Press and hold the catch to push

the head restraints down 3 25.

Folding down/up rear backrests Check that the seat belts are not

engaged in the seat belt buckles, so that the backrests can be moved.

Pull the release lever on one or both outer sides and fold down the backrests onto the seat cushion.

To fold up, raise the backrests and guide them into an upright position until they engage audibly. Make sure that the belts are positioned correctly and stay clear of the folding area.

The backrests are properly engaged when the red marks near the release levers are no longer visible.

9 Warning

When folding up, ensure that backrests are securely locked in position before driving. Failure to do so may result in personal injury or damage to the load or vehicle in the event of hard braking or a collision.

48 Storage

The seat belt of the centre seat could be blocked when the backrest is folded up too quickly. To unlock the retractor, push in the seat belt or pull it out by approx. 20 mm then release.

Load compartment cover Do not place any objects on the cover.

Removing cover

Unhook retaining straps from tailgate.

Lift cover at the front and push it upwards at the rear.

Remove the cover.

Fitting cover Engage cover in side guides and fold downwards. Attach the retaining straps to the tailgate.

Rear floor storage cover

The rear floor cover can be lifted and removed. Use opening to raise the rear floor cover and then remove it.

Double load floor The double load floor can be inserted in the load compartment in two positions:

Storage 49

lower position above the rear floor storage cover

upper position interlocked into back panel trim

To remove, use opening to raise the rear floor cover and lift it up. If mounted in the upper position, the space between the load floor and the spare wheel well cover can be used as a storage compartment. In this position, if the rear seat backrests are folded forwards, an almost completely flat load bay is created.

In the upper position, the double load floor is able to withstand an equally distributed maximum load of 60 kg. In the lower position, the double load floor is able to withstand the maximum permissible load.

Lashing eyes

The lashing eyes are designed to secure items against slippage, e.g. using lashing straps or luggage net.

Warning triangle

Stow the warning triangle in the space at the rear of the load compartment and secure it with the Velcro

fastener.

50 Storage

Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. For further information, contact your workshop.

Open all doors. Mounting points are located in each door frame of the vehicle body. Fasten the roof rack according to the installation instructions delivered with the roof rack.

Remove the roof rack when not in use. Loading information

9 Warning

Always make sure that the load in the vehicle is securely stowed. Otherwise objects can be thrown around inside the vehicle and cause personal injury or damage to the load or car.

Heavy objects in the load compartment should be placed against the seat backrests. Make sure that the backrests are

Storage 51

securely engaged. If objects can be stacked, heavier objects should be placed at the bottom.

Prevent sliding of loose objects by securing them with straps attached to the lashing eyes 3 49.

Do not allow the load to protrude above the upper edge of the backrests.

Do not place any objects on the load compartment cover or the instrument panel, and do not cover the sensor on top of the instrument panel.

The load must not obstruct the operation of the pedals, parking brake and gear selector, or hinder the freedom of movement of the driver. Do not place any unsecured objects in the interior.

Do not drive with an open load compartment.

The payload is the difference between the permitted gross vehicle weight (see identification plate 3 220) and the EC kerb weight.

To calculate the payload, enter the data for your vehicle in the weights table at the front of this manual. The EC kerb weight includes weights for the driver (68 kg), luggage (7 kg) and all fluids (fuel tank 90% full). Optional equipment and accessories increase the kerb weight.

Driving with a roof load increases the sensitivity of the vehicle to cross-winds and has a detrimental effect on vehicle handling due to the vehicle's higher centre of gravity. Distribute the load evenly and secure it properly with retaining straps. Adjust the tyre pressure and vehicle speed according to the load conditions. Check and retighten the straps frequently. Do not drive faster than 75 mph. The permissible roof load is 75 kg. The roof load is the combined weight of the roof rack and the load.

52 Instruments and controls

Instruments and controls

Instrument panel overview ........... 53 Controls ....................................... 55

Steering wheel adjustment ........ 55 Steering wheel controls ............. 55 Heated steering wheel ............... 55 Horn ........................................... 56 Pedestrian safety alert ............... 56 Windscreen wiper and washer . . 56 Rear window wiper and washer ...................................... 58

Outside temperature .................. 58 Clock ......................................... 59 Power outlets ............................. 59 Inductive charging ..................... 60

Warning lights, gauges and indi cators ........................................... 61

Instrument cluster ...................... 61 Speedometer ............................. 63 Odometer .................................. 63 Trip odometer ............................ 63 Tachometer ............................... 64 Fuel gauge ................................ 65 High voltage battery gauge ....... 65 Power indicator gauge ............... 66

Total vehicle range .................... 66 Engine coolant temperature gauge ....................................... 67

Engine oil level monitor ............. 67 Service display .......................... 67 Control indicators ...................... 68 Turn lights .................................. 69 Seat belt reminder ..................... 69 Airbag and belt tensioners ......... 70 Airbag deactivation .................... 70 Charging system ....................... 70 Malfunction indicator light .......... 70 Service vehicle soon ................. 71 Stop engine ............................... 71 System check ............................ 71 Brake and clutch system ........... 71 Parking brake ............................ 71 Electric parking brake fault ........ 72 Automatic operation of electric parking brake off ....................... 72

Antilock brake system (ABS) ..... 72 Gear shifting .............................. 72 Lane keep assist ....................... 72 Advanced lane keep assist ........ 72 Electronic Stability Control and Traction Control system ........... 73

Engine coolant temperature ...... 73 Preheating ................................. 73 Exhaust filter .............................. 73 AdBlue ....................................... 74

Deflation detection system ........ 74 Engine oil pressure .................... 74 Low fuel ..................................... 74 Charging cable connected ......... 75 Vehicle ready ............................. 75 Reduced engine power ............. 75 Autostop .................................... 75 Exterior light .............................. 75 Low beam .................................. 75 High beam ................................. 75 High beam assist ....................... 75 LED headlights .......................... 75 Front fog lights ........................... 75 Rear fog light ............................. 75 Rain sensor ............................... 75 Pedestrian safety alert fault ....... 75 Active emergency braking ......... 76 Door open .................................. 76

Displays ....................................... 76 Driver Information Centre .......... 76 Info Display ................................ 77

Vehicle messages ........................ 79 Warning chimes ......................... 80

Vehicle personalisation ................ 80 Telematics services ..................... 81

Vauxhall Connect ...................... 81

Instruments and controls 53

Instrument panel overview

54 Instruments and controls

1 Power windows ..................... 22 2 Exterior mirrors ..................... 20 3 Side air vents ...................... 100 4 Turn lights, headlight

flash, low / high beam ........... 88

Parking lights ........................ 89

Buttons for Driver Information Centre ................ 76

5 Cruise control ..................... 127

Speed limiter ....................... 129

Adaptive cruise control ....... 131

Heated steering wheel .......... 55 6 Instruments ........................... 63

Driver Information Centre ...... 76 7 Infotainment controls, see

Infotainment Manual 8 Windscreen wiper and

washer, rear wiper and washer ................................. 56

9 Power button ....................... 104 10 Central locking system ........... 9 11 Controls for Info Display

operation .............................. 77

12 Hazard warning flashers ...... 87 13 Centre air vents .................. 100 14 Vauxhall Connect ................. 81 15 Reading lights ...................... 90 16 Interior lights ........................ 90 17 Seat belt reminder ................ 29

Airbag deactivation .............. 37 18 Interior mirror ....................... 21 19 Glovebox .............................. 45 20 Centre air vents .................. 100 21 Climate control system .......... 95 22 USB port .............................. 59 23 Power outlet .......................... 59 24 Parking assist ..................... 143

Lane keep assist ................ 158

Stop start system ............... 107 25 Selector lever ...................... 119 26 Parking brake ..................... 122 27 Ignition switch ..................... 104 28 Steering wheel adjustment . . 55 29 Horn ..................................... 56 30 Fuse box ............................ 192

31 Bonnet release lever .......... 181 32 Light switch .......................... 83

Headlight range adjustment ........................... 85

Front fog lights ...................... 88

Rear fog light ........................ 88

Instrument panel illumination ............................ 89

Instruments and controls 55

Controls Steering wheel adjustment

Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released.

Steering wheel controls Some driver assistance systems, Infotainment system and a connected mobile phone can be operated via the controls on the steering wheel.

Further information is available in the Infotainment manual. Cruise control 3 127. Speed limiter 3 129. Adaptive cruise control 3 131.

Heated steering wheel

Activate heating by pressing Z. Activation is indicated by the LED in the button. Stop-start system 3 107.

56 Instruments and controls

Horn

Press d.

Pedestrian safety alert The sound of the pedestrian safety alert is generated to indicate the vehicle presence to pedestrians. It is active up to 19 mph.

Windscreen wiper and washer Windscreen wiper with adjustable wiper frequency

HI : fast LO : slow INT : interval wiping OFF : off 1x : single wipe

Do not use if the windscreen is frozen. Switch off in car washes.

To activate interval wiping mode the next time ignition is switched on, press the lever downwards to position OFF and back to INT.

Adjustable wiper frequency

Wiper lever in position INT. Turn the adjuster wheel to adjust the desired wipe freqeuency.

Instruments and controls 57

Windscreen wiper with rain sensor

HI : fast LO : slow AUTO : automatic wiping with rain

sensor OFF : off 1x : single wipe

In AUTO position, the rain sensor detects the amount of water on the windscreen and automatically regulates the frequency of the windscreen wiper. y illuminates in the Driver Information Centre.

For a single wipe when the windscreen wiper is off, press the lever downwards to position 1x. Do not use if the windscreen is frozen. Switch off in car washes.

Keep the sensor free from dust, dirt and ice.

Adjustable sensitivity of the rain sensor

Turn the adjuster wheel to adjust the sensitivity.

58 Instruments and controls

Windscreen washer

Pull lever. Washer fluid is sprayed onto the windscreen and the wiper wipes a few times. Washer fluid 3 184.

Rear window wiper and washer Rear window wiper

OFF : off INT : intermittent operation

Do not use if the rear window is frozen. Switch off in car washes. The rear window wiper comes on automatically when the windscreen wiper is switched on and reverse gear is engaged.

Activation or deactivation of this function can be changed in the Vehicle personalisation menu 3 80.

Rear window washer

Push lever. Washer fluid is sprayed onto the rear window and the wiper wipes a few times. Washer fluid 3 184.

Outside temperature A drop in temperature is indicated immediately and a rise in temperature after a time delay.

Instruments and controls 59

Illustration shows an example. If outside temperature drops to a certain temperature, a warning message is displayed in the Driver Information Centre.

9 Warning

The road surface may already be icy even though the display indicates a few degrees above 0 C.

Clock Date and time are shown in the Info Display.

The adjustment of date and time is described in the Infotainment Manual.

Power outlets

Do not exceed the maximum power consumption of 120 W. The 12 V power outlet is deactivated in the event of low vehicle battery voltage. Electrical accessories that are connected must comply with the electromagnetic compatibility requirements laid down in DIN VDE 40 839.

Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries. Do not damage the outlet by using unsuitable plugs. Stop-start system 3 107.

USB ports

The USB port provides 5 V. Notice The sockets must always be kept clean and dry.

60 Instruments and controls

Rear USB ports

The slot below the USB ports on the rear side of the storage container is intented to attach an accessory cupholder.

Inductive charging

9 Warning

Inductive charging can affect the operation of implanted pacemakers or other medical devices. If applicable, seek medical advice before using the inductive charging device.

9 Warning

Remove any metal objects from the charging device before charging a mobile device, as these objects could become very hot.

To charge a mobile device:

1. Remove all objects from the charging device.

2. Place the mobile device with the display facing upwards on the charging area. Note that the mobile device must be placed between the positioning aids.

Qi compatible mobile devices can be charged inductively. On some mobile devices, a back cover with an integrated coil or a jacket may be required to use inductive charging. Protective cover for the mobile device could have impact on the inductive charging. In the event that the mobile device is not charging properly, rotate it 180 and place it on the charging device again.

Status LED

Instruments and controls 61

The LED indicates the current charging status.

Illuminates green The mobile device is charging.

Flashes yellow The mobile device has not been centred properly in the charging zone or an unknown object has been detected in the charging zone.

Illuminates yellow There is a problem with the mobile device's battery or a fault of the inductive charger has been detected. If the problem persists, seek the assistance of a workshop.

Warning lights, gauges and indicators Instrument cluster Depending on the version, two instrument clusters are available.

Midlevel instrument cluster

Uplevel instrument cluster

Overview The numbers in the overview table indicate what to do, when a control indicator illuminates or flashes. 1 : only for information 2 : information and warning 3 : seek the assistance of a

workshop 4 : stop engine and seek the

assistance of a workshop 5 : have the cause of the fault

remedied immediately by a workshop

6 : stop vehicle, do not continue the journey and seek the assistance of a workshop

1 1 Turn lights 3 69

a 2 Seat belt reminder 3 69

d 5 Airbag and belt tensioners 3 70

g 1 Airbag deactivation 3 70

S 4 Charging system 3 70

62 Instruments and controls

W 5 Malfunction indicator light 3 70

C 5 Service vehicle soon 3 71

+ 4 Stop engine 3 71

X 4 System check 3 71

h 6 Brake and clutch system 3 71

j 1 / 5

Parking brake 3 71

o 2 Automatic operation of electric parking break off 3 72

k 5 Electric parking brake fault 3 72

i 2 Antilock brake system (ABS) 3 72

Y 1 Gear shifting 3 72

L 2 Lane keep assist 3 72

O 2 Advanced lane keep assist 3 72

J 2 / 5

Electronic Stability Control and Traction Control system 3 73

V 4 Engine coolant temper ature high 3 73

z 1 Preheating 3 73

t 2 / 3

Exhaust filter 3 73

u 1 AdBlue 3 74

q 2 / 3

Deflation detection system 3 74

T 4 Engine oil pressure 3 74

r 2 Low fuel 3 74

n 1 Autostop 3 75

F 1 Exterior light 3 75

D 1 Low beam 3 75

A 1 High beam 3 75

B 1 High beam assist 3 75

G 1 Front fog lights 3 75

H 1 Rear fog light 3 75

y 1 Rain sensor 3 75

m 2 / 3

Active emergency braking 3 76

P 2 Door open 3 76

i 5 Service vehicle soon3 71

j 2 Charging cable connected 3 75

READY 1 Vehicle ready 3 75

M 2 Reduced engine power 3 75

K 3 Pedestrian safety alert fault3 75

Instruments and controls 63

Speedometer Midlevel instrument cluster

Uplevel instrument cluster

Indicates vehicle speed.

Odometer The total recorded distance is displayed in miles. Midlevel instrument cluster

Uplevel instrument cluster

Trip odometer Midlevel instrument cluster

64 Instruments and controls

Uplevel instrument cluster

The recorded distance since the last reset is displayed. Trip odometer counts up to 9,999 miles.

Press SET / CLR for 2 seconds to reset the trip odometer. Driver Information Centre 3 76.

Tachometer Midlevel instrument cluster

Uplevel instrument cluster

Instruments and controls 65

Displays the engine speed. Drive in a low engine speed range for each gear as much as possible. A red marker indicates the beginning of the warning zone of excessive revolutions. For Diesel engines, the warning zone starts at 5000 revolutions per minute. For petrol engines, the warning zone starts at 6500 revolutions per minute.

Caution

If the indicator is in the red warning zone, the maximum permitted engine speed is exceeded. The engine can be damaged.

Fuel gauge Midlevel instrument cluster

Uplevel instrument cluster

Control indicator r illuminates yellow if the fuel level is low. Never run the fuel tank dry. The top-up quantity may be less than the specified fuel tank capacity, due to the remaining fuel in the tank.

High voltage battery gauge Midlevel instrument cluster

66 Instruments and controls

Uplevel instrument cluster

Displays the high voltage battery state of charge.

Power indicator gauge Midlevel instrument cluster

Uplevel instrument cluster

The power indicator gauge informs about the current energy situation of the vehicle. Charge : Battery is being charged

with energy resulting from braking or deceleration of the vehicle

Eco : An optimum in energy is accessible in all driving modes

Power : Vehicle is driven in a dynamic driving style with focus on performance

Total vehicle range Displays the total vehicle range.

Instruments and controls 67

Engine coolant temperature gauge Midlevel instrument cluster

Uplevel instrument cluster

Displays the coolant temperature. grey marking / 90

: normal operating temperature

red marking : temperature too high

Control indicator V illuminates red if coolant temperature is too high.

Caution

If engine coolant temperature is too high, stop vehicle, switch off engine. Danger to engine. Check coolant level.

Engine oil level monitor The state of the engine oil level is displayed in the Driver Information Centre for a few seconds following the service information after switching on the ignition. A proper state of engine oil level is indicated by a message. If engine oil level is low, T flashes and a message is indicated, accompanied by the C indicator. Confirm engine oil level by using the dipstick and top up engine oil respectively. Engine oil 3 182. A fault of measurement is indicated by a message. Check engine oil level manually by using the dipstick.

Service display The service system informs when to change the engine oil and filter or a vehicle service is required. Based on driving conditions, the interval at which an engine oil and filter change are required can vary considerably. Service information 3 215.

68 Instruments and controls

A required service due is displayed in the Driver Information Centre for several seconds after switching on the ignition. If no service is required for the next 1800 miles or more, no service information appears in the display. If service is required within the next 1800 miles, the remaining distance to the next service due, the distance travelled since the last service due or the time period that remains to the next service due is indicated for several seconds. Simultaneously symbol C illuminates temporary as reminder. If service is required in less than 600 miles, the remaining distance to the next service due, the distance travelled since the last service due or the time period that remains to the next service due is indicated for several seconds. Simultaneously C illuminates permanently as reminder. Overdued service is indicated by a message in the Driver Information Centre which indicates the overdued

distance. C flashes and then illuminates permanently until service is executed.

Reset of service interval After each service, the service indicator must be reset to ensure proper functionality. It is recommended to seek the assistance of a workshop. If service is executed by yourself, operate as following: switch off ignition

press and hold SET / CLR

switch on ignition, the distance indication begins a countdown

when the display indicates =0, release SET / CLR

The symbol C disappears.

Retrieving service information The status of the service information can be retrieved at any time via the Info Display. Press Check in the vehicle settings menu. The service information is displayed for a few seconds. Info Display 3 77. Service information 3 215.

Control indicators The control indicators described are not present in all vehicles. The description applies to all instrument versions. Depending on the equipment, the position of the control indicators may vary. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.

Instruments and controls 69

The control indicator colours mean: red : danger, important reminder yellow : warning, information, fault green : confirmation of activation blue : confirmation of activation white : confirmation of activation grey : system paused, at least one

system limitation has been detected

See all control indicators on different instrument clusters 3 61.

Turn lights 1 illuminates or flashes green.

Illuminates briefly The parking lights are switched on.

Flashes Turn lights or the hazard warning flashers are activated. Rapid flashing: failure of a turn light or associated fuse. Bulb replacement 3 188. Turn lights 3 88.

Seat belt reminder a illuminates or flashes in the instrument cluster together with the indication in the overhead console for each seat belt.

a illuminates in different colours depending on condition: red : seat belt not fastened green : seat belt fastened grey : seat not occupied

When the ignition is switched on, a illuminates in the overhead console in the corresponding colour.

After driving off, a in the instrument cluster and the symbol for the respective seat in the overhead console flash in red for a certain time together with a chime if the respective seat is occupied but the seat belt is not fastened. After a certain time of driving, a illuminates constantly in red until the seat belt of the respective seat has been fastened.

If any passenger has unfastened the seat belt during driving, a in the instrument cluster and the symbol for the respective seat in the overhead console flash in red for a certain time together with a chime. After a certain time of driving, a illuminates constantly in red until the seat belt of the respective seat has been fastened again.

Depending on version, a could illuminate in red when the respective seat is not occupied or a could extinguish after a certain time independent on condition. Seat belts 3 29.

70 Instruments and controls

Airbag and belt tensioners d illuminates red. When the ignition is switched on, the control indicator illuminates for some seconds. If it does not illuminate, does not extinguish after some seconds or illuminates whilst driving, there is a fault in the airbag system. Seek the assistance of a workshop. The airbags and belt pretensioners may fail to trigger in the event of an accident. Deployment of the belt pretensioners or airbags is indicated by continuous illumination of d.

9 Warning

Have the cause of the fault remedied immediately by a workshop.

Belt pretensioners 3 29. Airbag system 3 32.

Airbag deactivation

H illuminates yellow. The front passenger airbag is activated. g illuminates yellow. The front passenger airbag is deactivated. Airbag deactivation 3 37.

Charging system S illuminates red. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts.

Illuminates when the engine is running Stop, switch off engine. Vehicle battery is not charging. Engine cooling may be interrupted. The brake servo unit may cease to be effective. Seek the assistance of a workshop.

Malfunction indicator light W illuminates or flashes yellow. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts.

Illuminates when the engine is running Fault in the emission control system. The permitted emission limits may be exceeded. Seek the assistance of a workshop immediately.

Instruments and controls 71

Flashes when the engine is running Fault that could lead to catalytic converter damage. Ease up on the accelerator until the flashing stops. Seek the assistance of a workshop immediately.

Service vehicle soon C / i illuminates yellow. C Illuminates briefly when the ignition is switched on. May illuminate together with other control indicators and a corresponding message in the Driver Information Centre. Seek the assistance of a workshop immediately. i Illuminates permanently when the ignition is switched on. A fault of the electric engine or the high voltage battery has been detected.

Seek the assistance of a workshop immediately.

Stop engine + illuminates red. Illuminates briefly when the ignition is switched on. Illuminates together with other control indicators, accompanied by a warning chime and a corresponding message in the Driver Information Centre. Stop engine immediately and seek the assistance of a workshop.

System check X illuminates yellow or red.

Illuminates yellow A minor engine fault has been detected.

Illuminates red A major engine fault has been detected. Stop engine as soon as possible and seek the assistance of a workshop.

Brake and clutch system h illuminates red. The brake and clutch fluid level is too low.

9 Warning

Stop. Do not continue your journey. Consult a workshop.

Brake fluid 3 184.

Parking brake j illuminates or flashes red.

Illuminates Parking brake is applied 3 122.

Flashes Electric parking brake is not applied automatically. The application or the release are faulty.

72 Instruments and controls

9 Warning

Have the cause of the fault remedied immediately by a workshop.

Electric parking brake fault k illuminates yellow.

Illuminates Electric parking brake has a fault 3 122.

9 Warning

Have the cause of the fault remedied immediately by a workshop.

Automatic operation of electric parking brake off o illuminates yellow.

Illuminates Automatic operation is deactivated or faulty. In the event of a fault, o illuminates together with other control

indicators or it is accompanied by a corresponding message in the Driver Information Centre. Activate automatic operation again or have the cause remedied by a workshop in the event of a fault. Automatic operation 3 122.

Antilock brake system (ABS) i illuminates yellow. Illuminates for a few seconds after the ignition is switched on. The system is ready for operation when the control indicator extinguishes. If the control indicator does not extinguish after a few seconds, or if it illuminates while driving, there is a fault in the ABS. The brake system remains operational but without ABS regulation. Antilock brake system 3 121.

Gear shifting Y or Z with the number of a higher or lower gear is indicated, when upshifting or downshifting is recommended for fuel saving reasons. On vehicles with automatic transmission, the system is only active in manual mode. Manual mode 3 118.

Lane keep assist L illuminates or flashes yellow.

Illuminates yellow A fault has been detected.

Flashes yellow The system is correcting the unintended lane change. Lane keep assist 3 158.

Advanced lane keep assist O illuminates grey, green or yellow.

Instruments and controls 73

Illuminates grey The system is paused. At least one system limitation has been detected.

Illuminates green The system is active and ready to operate.

Illuminates yellow The system has a fault. Advanced lane keep assist 3 160.

Electronic Stability Control and Traction Control system J illuminates or flashes yellow.

Illuminates A fault in the system is present. Continued driving is possible. Driving stability, however, may deteriorate depending on road surface conditions. Have the cause of the fault remedied by a workshop.

After reconnecting the vehicle battery, (e.g. after maintenance work), J is illuminated for several seconds. After this time period, J extinguishes. This is a normal procedure, the vehicle does not need any assistance.

Flashes The system is actively engaged. Engine output may be reduced and the vehicle may be braked automatically to a small degree. Electronic Stability Control and Traction Control system 3 125.

Engine coolant temperature V illuminates red.

Illuminates red when the engine is running Stop, switch off engine.

Caution

Coolant temperature too high.

Check coolant level immediately 3 183. If there is sufficient coolant, consult a workshop.

Preheating z illuminates yellow. Preheating of diesel engine is activated. Only activates when outside temperature is low. Start the engine when control indicator extinguishes. Starting the engine 3 106.

Exhaust filter t illuminates yellow. The exhaust filter requires cleaning. Continue driving until the control indicator extinguishes.

Illuminates temporarily Start of saturation of the exhaust filter. Start cleaning process as soon as possible by driving at a vehicle speed of at least 40 mph.

74 Instruments and controls

Illuminates constantly Indication of a low additive level. Seek the assistance of a workshop. Exhaust filter 3 110.

AdBlue u flashes or illuminates yellow.

Illuminates yellow The remaining driving range is between 500 miles and 1500 miles.

Flashes yellow The remaining driving range is between 0 and 500 miles. AdBlue level is low. Refill AdBlue soon to avoid prevention of the engine start. AdBlue 3 111.

Deflation detection system q illuminates or flashes yellow.

Illuminates Tyre pressure loss in one or more wheels. Stop immediately and check tyre pressure.

Flashes Fault in system. Consult a workshop. Deflation detection system 3 197.

Engine oil pressure T illuminates red. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts.

Illuminates when the engine is running

Caution

Engine lubrication may be interrupted. This may result in damage to the engine and / or locking of the drive wheels.

1. Select neutral gear. 2. Move out of the flow of traffic as

quickly as possible without impeding other vehicles.

3. Switch off ignition.

9 Warning

When the engine is off, considerably more force is needed to brake and steer. During an Autostop the brake servo unit will still be operational. Do not remove key until vehicle is stationary, otherwise the steering wheel lock could engage unexpectedly.

Keep engine turned off and let the vehicle be towed to a workshop.

Low fuel r illuminates yellow. Level in fuel tank is too low. Refuelling 3 175. Bleeding the diesel fuel system 3 187.

Instruments and controls 75

Charging cable connected j illuminates red. The vehicle plug of the charging cable is still connected to the charge port. The vehicle cannot be started. Disconnect the vehicle plug from the charge port and close the charge port flap. Charging 3 165.

Vehicle ready READY illuminates green. The vehicle is ready to be driven.

Reduced engine power M illuminates yellow. The charging level of the high voltage battery is low. Only reduced engine power is available.

Autostop n illuminates or flashes green.

Illuminates green Engine is in an Autostop.

Flashes green Autostop is temporarily unavailable, or Autostop mode is invoked automatically. Stop-start system 3 107.

Exterior light F illuminates green. The exterior lights are on 3 83.

Low beam D illuminates green. Illuminated when low beam is on.

High beam A illuminates blue. Illuminates when high beam is on or during headlight flash 3 84.

High beam assist B illuminates green. The high beam assist is activated 3 84.

LED headlights C illuminates and a warning message is displayed in the Driver Information Centre. Seek the assistance of a workshop.

Front fog lights G illuminates green. The front fog lights are on 3 88.

Rear fog light H illuminates yellow. The rear fog light is on 3 88.

Rain sensor y illuminates green. Illuminated when rain sensor position on wiper lever is selected. Windscreen wiper and washer 3 56.

Pedestrian safety alert fault K illuminates yellow. The pedestrian safety alert is not working.

76 Instruments and controls

Active emergency braking m illuminates or flashes yellow.

Illuminates The system has been deactivated or a fault has been detected. Additionally, a warning message is displayed in the Driver Information Centre. Check the reason of the deactivation 3 139 and in case of a system fault, seek the assistance of a workshop. Notice m also illuminates if the seat belts of the front passengers are not fastened. In this case, active emergency braking is deactivated.

Flashes The system is actively engaged and brakes automatically the vehicle. Active emergency braking 3 139. Forward collision alert 3 138. Front pedestrian protection 3 142.

Door open P illuminates red. A door or the tailgate is open.

Displays Driver Information Centre The Driver Information Centre is located in the instrument cluster. Driver Information Centre indicates: overall and trip odometer digital speed indication gear shift indication service information vehicle and warning messages driver assistance messages pop-up messages

Selecting menus and functions The menus and functions can be selected via the buttons on the indicator lever.

Instruments and controls 77

Turn the adjuster wheel to select a view of the Driver Information Centre. Different views are available for driving and navigation information. Also a personalised view is selectable. Press SET / CLR to confirm or reset a function. Vehicle and service messages are popped up in the Driver Information Centre, if required. Scroll messages by turning the adjuster wheel. Confirm messages by pressing SET / CLR. Vehicle messages 3 79.

Personalised view A personalised view can be selected by turning the adjuster wheel. The personalised view consists of two sections which can be adjusted in the Info Display.

To choose the content for each section, go to the settings z menu I OPTIONS and select the instrument panel personalisation page. Choose the content for each section, e.g. the navigation map and current trip information, and select A.

Info Display The Info Display can indicate: time 3 59 outside temperature 3 58 date 3 59 Infotainment system, see

description in the Infotainment Manual

indication of rear view camera 3 154

navigation, see description in the Infotainment Manual

vehicle and system messages 3 79

settings for vehicle personalisation 3 80

AdBlue range 3 111

78 Instruments and controls

Multimedia / Multimedia Navi / Multimedia Navi Pro

The illustrations show different variants of the infotainment system.

Selecting menus and settings There are three options to operate the display: via buttons next to the display by touching the touchscreen with

the finger via speech recognition

Button and touch operation Press ) to switch on the display. Press : to select system settings (units, language, time and date). Press _ to select vehicle settings or driving functions. Touch required menu display icon or a function with the finger. Confirm a required function or selection by touching. Touch 3 or & on the display to exit a menu without changing a setting. For further information, see Infotainment Manual. Speech recognition Description see Infotainment Manual.

Flow Notice On vehicles equipped with the Multimedia infotainment system, this menu can only be used via the MyVauxhall App.

This menu displays the current energy flow within the electric system.

1. Press m. 2. Select Flow.

Different colours show the engery flow. green: electric engine operating blue: regenerating energy

Instruments and controls 79

Average consumption Notice On vehicles equipped with the Multimedia infotainment system, this menu can only be used via the MyVauxhall App.

This menu displays the average power consumption during the current trip. green: electric energy consumed blue: electric energy generated

from the braking and deceleration phases of the vehicle used to recharge the battery

The current trip is subdivided into time steps. For each time step, the average consumption is displayed. The time steps can be modified.

1. Press m. 2. Select Statistics. 3. Press + and - to modify the time

steps. Vehicle personalisation 3 80.

Vehicle messages Messages are indicated in the Driver Information Centre, in some cases together with a warning chime.

Press SET / CLR to confirm a message.

Vehicle and service messages The vehicle messages are displayed as text. Follow the instructions given in the messages.

80 Instruments and controls

Messages in the Info Display Some important messages may appear additionally in the Info Display. Some messages only pop- up for a few seconds.

Warning chimes The warning chime regarding not fastened seat belts has priority over any other warning chime.

When starting the engine or whilst driving A warning chime will sound when a seat belt is not fastened a door or the tailgate is not fully

closed a certain speed is exceeded with

parking brake applied cruise control deactivates

automatically a programmed speed or speed

limit is exceeded a warning message appears in

the Driver Information Centre

the electronic key is not in the passenger compartment

the parking assist detects an object

an unintended lane change occurs

hands-off driving is recognised the exhaust filter has reached the

maximum filling level If several warnings appear at the same time, only one warning chime will sound.

When the vehicle is parked and / or the driver's door is opened With exterior lights on.

During an Autostop If the driver's door is opened. If any condition for a restart of the

engine is not fulfilled.

Vehicle personalisation The vehicle's behaviour can be personalised by changing the settings in the Info Display. Some functions are only displayed or active when the engine is running.

Multimedia / Multimedia Navi / Multimedia Navi Pro

The illustrations show different variants of the infotainment system.

Instruments and controls 81

Touch _ to display the vehicle personalisation menu. Lighting, comfort and safety settings are adjustable.

Telematics services Vauxhall Connect Vauxhall Connect comprises multiple connected services accessible via app, online or within the vehicle. Notice Full functionality of Vauxhall Connect is subject to registration and proper activation.

Connected services may include live navigation such as online traffic information and vehicle status and information such as maintenance alerts. Services accessible within the vehicle also include emergency call and breakdown call. These functions are automatically activated. Terms and conditions apply. Emergency call function and breakdown call function are operated by the buttons in the overhead console.

Status LED in the overhead console Illuminates green and red and extinguishes after a short time, when the ignition is switched on: the system works properly. Illuminates red: fault in the system. Contact a workshop. Flashes red: backup battery needs replacement. Contact a workshop.

Emergency call The emergency call function will establish a connection to the nearest public safety answering point (PSAP). A minimum set of data including vehicle and location information will be sent to the PSAP. Notice Establishing an emergency call may not be possible in areas without sufficient network availability or due to hardware damage during an accident.

82 Instruments and controls

In case of an emergency, press the red SOS button for more than 2 seconds. The LED flashes green to confirm that a connection to the nearest PSAP is being established. The LED illuminates steadily as long as the call is active. Pressing the SOS button immediately a second time will terminate the call. The LED switches off.

Automatic crash notification In case of an accident with airbag deployment, an automatic emergency call is established and an automatic crash notification will be transmitted to the next PSAP.

Breakdown call Pressing the . button for more than 2 seconds connects you to a roadside assistance service provider. For information about coverage and scope of services of the roadside assistance, please refer to the Service and warranty booklet.

Privacy settings Privacy settings of Vauxhall Connect can be configured in your vehicle. This will impact the set of data being sent, e.g., in case a breakdown call is triggered.The emergency call function will not be impacted. Depending on version, the privacy settings can be changed by simultaneously pressing . and SOS in the overhead console or via the system settings menu in the Info Display.

Lighting 83

Lighting

Exterior lighting ............................ 83 Light switch ................................ 83 Automatic light control ............... 84 High beam ................................. 84 High beam assist ....................... 84 Headlight flash ........................... 85 Headlight range adjustment ...... 85 Headlights when driving abroad ...................................... 85

Daytime running lights ............... 85 Matrix-LED headlights ............... 86 Hazard warning flashers ............ 87 Turn lights .................................. 88 Front fog lights ........................... 88 Rear fog light ............................. 88 Parking lights ............................. 89 Reversing lights ......................... 89 Misted light covers ..................... 89

Interior lighting ............................. 89 Instrument panel illumination control ....................................... 89

Interior lights .............................. 90 Reading lights ............................ 90 Sunvisor lights ........................... 90

Lighting features .......................... 90 Entry lighting .............................. 90 Exit lighting ................................ 91 Vehicle locator lighting .............. 91 Peripheral lighting ...................... 91 Battery discharge protection ...... 91

Exterior lighting Light switch

Turn light switch: AUTO : automatic light control

switches automatically between daytime running light and headlight

8 : sidelights 9 : headlights

Control indicator 8 3 75.

84 Lighting

Automatic light control

When the automatic light control function is switched on, the system switches between daytime running lights and headlights automatically depending on the external lighting conditions and information given by the wiper system. Daytime running light 3 85.

Automatic headlight activation During poor lighting conditions the headlights are switched on. Additionally, headlights are switched on if the windscreen wipers have been activated for several wipes.

Tunnel detection When a tunnel is entered, headlights are switched on immediately.

High beam

Push to switch from low to high beam. Push again to deactivate high beam.

High beam assist The system switches from low beam to high beam and vice versa to prevent glaring. Once activated, high beam assist remains active and switches high beam on and off depending on surrounding

conditions. The latest setting of the high beam assist will remain after the ignition is switched on again. Glare-free high beam for Matrix-LED headlights 3 86.

Activation The high beam assist can be activated via the vehicle settings menu in the Info Display. Info Display 3 77. High beam is switched on automatically in dark surroundings at a speed above 28 mph. High beam is switched off at a speed below 22 mph, but high beam assist remains active. The green control indicator B illuminates continuously when the high beam assist is activated, the blue A illuminates when high beam is on. Control indicator B 3 75, A 3 75. High beam assist switches automatically to low beam when: Driving in urban areas. Camera detects heavy fog.

Lighting 85

Rear fog light is switched on. Oncoming or preceding vehicles

are detected by the camera. If there are no restrictions detected, the system switches back to high beam.

Deactivation The system can be deactivated via the vehicle settings menu in the Info Display. Info Display 3 77.

Headlight flash

Pull to activate the headlight flash.

Headlight range adjustment

Headlight range can be adjusted manually if vehicle is not equipped with Matrix-LED headlights. Matrix- LED headlights are adjusted automatically. To adapt headlight range manually to the vehicle load to prevent dazzling, turn thumb wheel X to required position. Non-electric vehicle 0 : front seats occupied 1 : all seats occupied

2 : all seats occupied and load compartment laden

3 : driver's seat occupied and load compartment laden

Electric vehicle 0 : front seats occupied 1 : all seats occupied with or without

load compartment laden 2 : driver's seat occupied and load

compartment laden 3 : not used

Headlights when driving abroad When driving in countries where traffic drives on the opposite side of the road, the headlights do not have to be adjusted.

Daytime running lights Daytime running lights increase visibility of the vehicle during daylight. Automatic light control 3 84.

86 Lighting

Matrix-LED headlights The Matrix-LED headlight system contains a variety of particular LEDs in each headlight which enables the control of the adaptive forward lighting functions. Light distribution and intensity of light are variably triggered depending on the lighting conditions, road type and driving situation. The vehicle adapts the headlights automatically to the situation to enable optimal light performance for the driver. The adaptive forward lighting and the Matrix-LED headlights functions can be deactivated or activated in the vehicle personalisation menu. Vehicle personalisation 3 80. Info Display 3 77. The glare-free high beam function of the Matrix-LED headlights are only available with light switch in position AUTO.

Country light

Activated automatically at a speed above 30 mph when driving in rural areas. The illumination of the current lane and the side of the road is adapted. Oncoming and preceding vehicles are not dazzled.

Town light

Activated automatically at a speed up to approx. 30 mph. The light is wide and symmetrical.

Cornering light

Activated at a speed of up to 25 mph when turning off. The light consists of particular LEDs which illuminate the direction of travel. These LEDs are triggered depending on the steering angle or the activation of the turn lights.

Curve light

Particular LEDs, based on steering angle and speed, are additionally triggered to improve lighting in curves. This function is activated at speeds from 25 mph to 43 mph.

Lighting 87

Glare-free high beam

9 Warning

The glare-free high beam function may dazzle other road users when the vehicle is driven in countries where traffic moves on the opposite side of the road. E.g. when the vehicle was designed for left hand drive traffic and it is driven in a country with right hand drive traffic. Switch off glare-free high beam function whenever you are driving in countries mentioned above!

The system enables a glare-free high beam when driving in dark surroundings.

Each LED on right or left side is triggered or faded out particularly according to the traffic situation. This gives the best light distribution without dazzling other road users. Glare-free high beam is switched on automatically at a speed above 28 mph. It is switched off at a speed below 22 mph, but the system remains active.

Motorway mode

Activated automatically at a speed above 65 mph. Illumination is adapted to the higher speed driven on motorways. If there is no oncoming traffic, the visibility on the side of the vehicle is increased. When following vehicles ahead or passing, dazzling for these vehicles is reduced.

Fault in LED headlight system When the system detects a failure in the LED headlight system, it selects a preset position to avoid dazzling of oncoming traffic. A warning is displayed in the Driver Information Centre.

Hazard warning flashers

Operated by pressing c. When braking in an emergency, the hazard warning flashers are switched on automatically, depending on the

88 Lighting

force of deceleration. They are switched off automatically, as soon as the vehicle is accelerated again.

Turn lights

up : right turn lights down : left turn lights

A resistance point can be felt when moving the indicator lever. Constant flashing is activated when the indicator lever is being moved beyond the resistance point. It is deactivated when the steering wheel

is moved in the opposite direction or indicator lever is manually moved back to its neutral position. After 20 seconds the volume of the audible signal will increase if the speed is above 50 mph. Activate temporary flashing by holding the indicator lever just before the resistance point. Turn lights will flash until indicator lever is being released. To activate three flashes, tap the indicator lever briefly without passing the resistance point.

Front fog lights

Operated by pressing >. Light switch in position AUTO: switching on front fog lights will switch headlights on automatically.

Rear fog light

Operated by pressing H. Light switch in position AUTO: switching on rear fog light will switch headlights on automatically. Light switch in position 8: rear fog light can only be switched on with front fog lights.

Lighting 89

The vehicle rear fog light is deactivated when towing a trailer or a plug is connected with the socket, e.g. when a bicycle carrier is used.

Parking lights

When the vehicle is parked, the parking lights on one side can be activated: 1. Switch off ignition. 2. Move the lever all the way up

(right parking lights) or down (left parking lights).

Confirmed by a signal and the corresponding turn lights control indicator.

Reversing lights The reversing light comes on when reverse gear is selected.

Misted light covers The inside of the light housing may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself. To help, switch on the headlights.

Interior lighting Instrument panel illumination control

Brightness of the following lights can be adjusted when the exterior lights are on: instrument panel illumination Info Display illuminated switches and

operation elements Turn thumb wheel F and hold until the desired brightness is obtained.

90 Lighting

Interior lights

Operate rocker switch: ; : automatic switching on

and off press : on press 2 : off

Notice In the event of an accident with airbag deployment the courtesy lights are turned on automatically.

Reading lights

Operated by pressing z.

Sunvisor lights Illuminates when the cover is opened.

Lighting features Entry lighting Welcome lighting Some or all of the following lights are switched on for a short time by unlocking the vehicle with the radio remote control: headlights interior lights

The number of activated lights depends on the surrounding light conditions. The lighting switches off immediately when the ignition is switched on. Starting off 3 104. This function can be activated or deactivated in the vehicle personalisation. Vehicle personalisation 3 80.

Lighting 91

The following lights will additionally switch on when the driver's door is opened: illumination of some switches Driver Information Centre door pocket lights

Exit lighting The following lights are switched on when the ignition is switched off: headlights interior lights centre console lighting

They will switch off automatically after a delay. This function works only in the dark.

Vehicle locator lighting This function allows to locate the vehicle, e.g., in weak lighting conditions using the remote control. The headlights come on and the turn lights flash for 10 seconds. Press b on the remote control.

Peripheral lighting Peripheral lighting allows you to switch on the position lights, low beam and number plate lighting using the remote control. Press D on the remote control to switch on peripheral lighting. Press D a second time to switch off peripheral lighting.

Battery discharge protection To prevent discharge of the vehicle battery when the ignition is switched off, some interior lights are switched off automatically after some time.

92 Climate control

Climate control

Climate control systems ............... 92 Heating and ventilation system . 92 Air conditioning system ............. 93 Electronic climate control system ...................................... 95

Auxiliary heater .......................... 99 Temperature preconditioning .... 99

Air vents ..................................... 100 Adjustable air vents ................. 100 Fixed air vents ......................... 100

Maintenance .............................. 101 Air intake ................................. 101 Air conditioning regular operation ................................ 101

Service .................................... 101

Climate control systems Heating and ventilation system

Controls for: temperature : air distribution w, > and y fan speed E demisting and defrosting $ heated rear window and exterior

mirrors f heated seats "

Heated rear window 3 24. Heated exterior mirrors 3 21. Heated seats 3 29.

Temperature Adjust the temperature by turning : to the desired temperature. red area : warmer blue area : colder

Heating will not be fully effective until the engine has reached normal operating temperature.

Air distribution w : to windscreen and front door

windows > : to head area via adjustable air

vents y : to foot well and windscreen

All combinations are possible.

Fan speed Adjust the air flow by turning Z to the desired speed. clockwise : increase anticlockwise : decrease

Climate control 93

Demisting and defrosting

Press $: the air distribution is directed towards the windscreen.

Set temperature controller : to warmest level.

Set fan speed E to highest level. Switch on heated rear window f. Open side air vents as required

and direct them towards the door windows.

Air conditioning system

Controls for: temperature : air distribution w, x and y fan speed E demisting and defrosting $ cooling A/C air recirculation n heated rear window and exterior

mirrors f heated seats "

Heated rear window 3 24. Heated exterior mirrors 3 21. Heated seats 3 29. Some setting changes are indicated briefly in the Info Display. Activated functions are indicated by the LED in the respective button.

Temperature Adjust the temperature by turning : to the desired temperature. red area : warmer blue area : colder

Heating will not be fully effective until the engine has reached normal operating temperature.

Air distribution w : to windscreen and front door

windows x : to head area via adjustable air

vents y : to foot well and windscreen

All combinations are possible.

Fan speed Adjust the air flow by turning E to the desired speed. clockwise : increase anticlockwise : decrease

94 Climate control

Cooling A/C

Press A/C to switch on cooling. The LED in the button illuminates to indicate activation. Cooling is only functional when the engine is running and fan is switched on. Press A/C again to switch off cooling. The air conditioning system cools and dehumidifies (dries) as soon as the outside temperature is slightly above the freezing point. Therefore, condensation may form and drip from under the vehicle. If no cooling or drying is required, switch off the cooling system for fuel saving reasons.

Activated cooling may inhibit Autostops. Stop-start system 3 107.

Air recirculation system

Press n to activate air recirculation mode. The LED in the button illuminates to indicate activation. Press n again to deactivate air recirculation mode.

9 Warning

The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up from inside. The quality of the passenger compartment air deteriorates, which may cause the vehicle occupants to feel drowsy.

In warm and very humid ambient air conditions, the windscreen may mist up from outside when cold air is directed towards it. If windscreen mists up from outside, activate windscreen wiper and deactivate w.

Maximum cooling

Briefly open the windows so that hot air can disperse quickly.

Climate control 95

Switch on cooling A/C. Press n for air recirculation

system on. Press x for air distribution. Set temperature control : to

coldest level. Set fan speed E to highest level. Open all vents.

Heated rear window 3 24. Heated exterior mirrors 3 21.

Demisting and defrosting the windows

Press $: the air distribution is directed towards the windscreen.

Set temperature controller : to warmest level.

Switch on cooling A/C, if required.

Switch on heated rear window f. Open side air vents as required

and direct them towards the door windows.

Notice If is pressed while the engine is running, an Autostop will be inhibited until is pressed again. If is pressed while the engine is in an Autostop, the engine will restart automatically.

Stop-start system 3 107.

Electronic climate control system

Controls for: temperature : MENU enters the Climate setting

menu in the Info Display

fan speed E automatic mode AUTO cooling A/C manual air recirculation n demisting and defrosting $ heated rear window and exterior

mirrors f heated seats "

Heated rear window 3 24. Heated exterior mirrors 3 21. Heated seats 3 29. In automatic mode, temperature, fan speed and air distribution are regulated automatically. Activated functions are indicated by the LED in the respective control. The electronic climate control system is only fully operational when the engine is running.

96 Climate control

Climate control settings menu

Press MENU to manually set the following climate control funtions: air distribution w, x and y fan speed E temperature : cooling A/C automatic mode AUTO

Climate setting menu can also be displayed in the Info Display. Info Display 3 77.

Automatic mode AUTO

Basic setting for maximum comfort: Press AUTO, the air distribution

and fan speed are regulated automatically.

Open all air vents to allow optimised air distribution in automatic mode.

Air conditioning must be activated for optimal cooling and demisting. Press A/C to switch on air conditioning. The LED in the button indicates activation.

Set the preselected temperature using the left or right rotary knob. Recommended temperature is 22 C.

Manual settings Climate control system settings can be changed by activating the following functions:

Fan speed E

Adjust the air flow by turning rotary knob to the desired speed. Fan speed can also be changed in the climate settings menu. Press MENU to enter the menu. Turn rotary knob anticlockwise as far as it will go: fan and cooling are switched off. To return to automatic mode, press AUTO.

Climate control 97

Air distribution w, x, y

Press MENU to enter the menu. Touch in the Info Display: w : to windscreen and front door

windows x : to head area and rear seats via

adjustable air vents y : to front and rear foot well and

windscreen

To return to automatic air distribution, press AUTO.

Temperature preselection :

Set the preselected temperature to the desired value using the left or the right rotary knob. Recommended temperature is 22 C. The temperature is indicated in the display and in the climate settings menu. If the minimum temperature Lo is set, the climate control system runs at maximum cooling, if cooling A/C is switched on. If the maximum temperature Hi is set, the climate control system runs at maximum heating. Notice If A/C is switched on, reducing the set cabin temperature can cause the engine to restart from an Autostop or inhibit an Autostop.

Stop-start system 3 107.

Air conditioning A/C

Press A/C to switch on cooling. The LED in the button illuminates to indicate activation. Cooling is only functional when the engine is running and climate control fan is switched on. Press A/C again to switch off cooling. The air conditioning system cools and dehumidifies (dries) when outside temperature is above a specific level. Therefore, condensation may form and drip from under the vehicle. If no cooling or drying is required, switch off the cooling system for fuel saving reasons.

98 Climate control

Manual air recirculation n

Press n to activate the air recirculation mode. The LED in the button illuminates to indicate activation. Press n again to deactivate recirculation mode.

9 Warning

The exchange of fresh air is reduced in air recirculation mode. In operation without cooling, the air humidity increases, so the windows may mist up from inside.

The quality of the passenger compartment air deteriorates, which may cause the occupants to feel drowsy.

In warm and very humid ambient air conditions, the windscreen may mist up from outside, when cold air is directed towards it. If windscreen mists up from outside, activate windscreen wiper and deactivate w.

Demisting and defrosting the windows $

Press $. The LED in the button illuminates to indicate activation.

Temperature and air distribution are set automatically and the fan runs at high speed.

Switch on air conditioning by pressing A/C, if required.

Switch on heated rear window f. To return to previous mode,

press $ again. To return to automatic mode, press AUTO.

Heated rear window 3 24. Heated exterior mirrors 3 21. Notice If is pressed while the engine is running, an Autostop will be inhibited until is pressed again. If is pressed while the engine is in an Autostop, the engine will restart automatically.

Stop-start system 3 107.

Deactivation of electronic climate control system Cooling, fan and automatic mode can be switched off by turning one of the rotary knobs anticlockwise. Activation by switching on the fan or pressing AUTO.

Climate control 99

Auxiliary heater Air heater Quickheat is an electric auxiliary air heater which automatically warms up the passenger compartment more quickly.

Temperature preconditioning The temperature preconditioning allows to heat or to ventilate the vehicle's interior with ambient air. The temperature preconditioning can be programmed via the Info Display or the MyVauxhall App. Notice On vehicles equipped with the Multimedia infotainment system, temperature preconditioning can only be used via the MyVauxhall App. Notice The temperature preconditioning is only activated if the ignition is off and the vehicle is locked.

If the charging level of the high voltage battery is below 50%, the temperature preconditioning is not activated. If a recurrent heating / ventilation is programmed and two heating / ventilation procedures are carried out without operating the vehicle, the programmation is deactivated.

Setting timer Notice Several timers can be programmed and saved. It is recommended to programme temperature preconditioning with the vehicle plugged in, in order to optimise the long-term perfomance of the high voltage battery.

Press MENU . Touch OPTIONS.

Select =. Touch + to define a new timer. Touch --:--. Enter time and day. Press A to confirm the settings. Press ON to activate the timer. To delete a timer, press f at the top of the Info Display and delete the desired timer. Confirm the deletion. The heating / ventilation procedure starts approx. 45 minutes before the programmed time, and is maintained ten minutes after it.

100 Climate control

Air vents Adjustable air vents Centre air vents in the instrument panel

Direct the flow of air by tilting and swivelling the slats. To close the vent, swivel the slats inwards.

Outer air vents in the instrument panel

Direct the flow of air by tilting and swivelling the slats. To close the vent, swivel the slats outwards. At least two air vents must be open while cooling is on.

9 Warning

Do not attach any objects to the slats of the air vents. Risk of damage and injury in case of an accident.

Fixed air vents Additional air vents are located beneath the windscreen and door windows and in the foot wells.

Climate control 101

Maintenance Air intake

The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow.

Air conditioning regular operation In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when the outside temperature is too low.

Service For optimal cooling performance, it is recommended to annually check the climate control system, starting three years after initial vehicle registration, including: functionality and pressure test heating functionality leakage check check of drive belts cleaning of condenser and

evaporator drainage performance check

102 Driving and operating

Driving and operating

Driving hints ............................... 103 Control of the vehicle ............... 103 Steering ................................... 103 Emergencies ........................... 103

Starting and operating ............... 104 New vehicle running-in ............ 104 Ignition switch positions ........... 104 Power button ........................... 104 Starting the engine .................. 106 Overrun cut-off ........................ 107 Stop-start system .................... 107 Parking .................................... 109

Engine exhaust .......................... 110 Exhaust filter ............................ 110 Catalytic converter ................... 111 AdBlue ..................................... 111

Electric drive unit ....................... 114 Operation ................................. 114

Automatic transmission .............. 116 Transmission display ............... 116 Gear selection ......................... 117 Manual mode ........................... 118 Electronic driving programmes 118

Fault ........................................ 119 Interruption of power supply .... 119

Manual transmission .................. 119 Drive systems ............................ 120

Drive modes ............................ 120 Brakes ........................................ 121

Antilock brake system ............. 121 Parking brake .......................... 122 Brake assist ............................. 124 Hill start assist ......................... 124 Regenerative braking .............. 124

Ride control systems ................. 125 Electronic Stability Control and Traction Control system ......... 125

Sport mode .............................. 126 Driver assistance systems ......... 127

Cruise control .......................... 127 Speed limiter ........................... 129 Adaptive cruise control ............ 131 Forward collision alert ............. 138 Active emergency braking ....... 139 Automatic post collision braking .................................... 142

Front pedestrian protection ..... 142 Parking assist .......................... 143 Advanced parking assist ......... 147 Side blind spot alert ................. 153 Rear view camera ................... 154 Traffic sign assistant ................ 157

Lane keep assist ..................... 158 Advanced lane keep assist ...... 160 Driver alert ............................... 162

Charging .................................... 164 General information ................. 164 Charging types ........................ 164 Charging cable ........................ 165 Programmable charging .......... 171 Charging status ....................... 172

Fuel ............................................ 173 Fuel for petrol engines ............. 173 Fuel for diesel engines ............ 174 Refuelling ................................ 175

Trailer hitch ................................ 176 General information ................. 176 Driving characteristics and towing tips .............................. 176

Trailer towing ........................... 177

Driving and operating 103

Driving hints Control of the vehicle Never coast with engine not running Many systems will not function in this situation (e.g. brake servo unit, power steering). Driving in this manner is a danger to yourself and others. All systems function during an Autostop. Stop-start system 3 107.

Pedals To ensure the pedal travel is uninhibited, there must be no mats in the area of the pedals. Use only floor mats, which fit properly and are fixed by the retainers on the driver side.

Steering If power steering assist is lost because the engine stops or due to a system malfunction, the vehicle can be steered but may require increased effort.

Emergencies

9 Warning

Damage to the high voltage battery or high voltage system can create a risk of electric shock, overheating, or fire. If the vehicle has been damaged or affected by a moderate to severe crash, it must be inspected as soon as possible by qualified personnel. Until the technical inspection has been carried out, the vehicle must be stored outside at a minimum distance of 5 metres from any structure or other flammable objects.

If the vehicle has been damaged or affected by flood or fire, it must not be moved at all and has to be inspected by qualified personnel as soon as possible.

104 Driving and operating

Starting and operating New vehicle running-in Do not brake unnecessarily hard for the first few journeys. During the first drive, smoke may occur because of wax and oil evaporating off the exhaust system. Park the vehicle in the open for a while after the first drive and avoid inhaling the fumes. During the running-in period, fuel and engine oil consumption may be higher. Additionally, the cleaning process of the exhaust filter may take place more often. Exhaust filter 3 110.

Ignition switch positions Turn key:

0 : ignition off: some functions remain active until key is removed or driver's door is opened, provided the ignition was on previously

1 : ignition on power mode: ignition is on, diesel engine is preheating, control indicators illuminate and most electrical functions are operable

2 : engine start: release key after engine has been started

Steering wheel lock Remove key from ignition switch and turn steering wheel until it engages.

9 Danger

Never remove the key from ignition switch during driving as this will cause steering wheel lock.

Power button

The electronic key must be inside the vehicle. Engine start Operate the clutch pedal (manual transmission), the brake pedal and press Start/Stop.

Driving and operating 105

Ignition on power mode without starting the engine Press Start/Stop without operating clutch or brake pedal. Control indicators illuminate and most electrical functions are operable. Engine and ignition off Press Start/Stop briefly in each mode or when engine is running and vehicle is stationary. Some functions remain active until driver's door is opened, provided the ignition was on previously. Emergency shut off during driving Press Start/Stop for 5 seconds 3 106. Steering wheel locks as soon as vehicle is stationary.

Steering wheel lock The steering wheel lock activates automatically when: the vehicle is stationary. the ignition has been switched

off. To release steering wheel lock, open and close driver's door and switch the ignition on power mode or start the engine directly.

9 Warning

If the vehicle battery is discharged, the vehicle must not be towed, tow-started or jump-started as the steering wheel lock cannot be disengaged.

Operation in case of failure If either the electronic key fails or the battery of the electronic key is weak, a message may be displayed in the Driver Information Centre.

Hold the electronic key at the marking on the steering column cover as shown in the illustration.

On vehicles with manual transmission, select neutral gear, operate the clutch pedal, the brake pedal and press Start/Stop. On vehicles with automatic transmission, set the selector lever to position P, operate the brake pedal and press Start/Stop. This option is intended for emergencies only. Replace the electronic key battery as soon as possible 3 8. For unlocking or locking the doors, see fault in radio remote control unit or electronic key system 3 9.

106 Driving and operating

Starting the engine Vehicles with ignition switch

Turn key to position 1 to release the steering wheel lock. Manual transmission: operate clutch and brake pedal. Automatic transmission: operate brake pedal. Do not operate accelerator pedal. Diesel engines: wait until control indicator z extinguishes. Turn key briefly to position 2 and release after engine has been started.

Manual transmission: during an Autostop, the engine can be started by depressing the clutch pedal 3 107. Automatic transmission: during an Autostop, the engine can be started by releasing the brake pedal 3 107.

Vehicles with power button

Manual transmission: select neutral gear, operate clutch and brake pedal.

Automatic transmission: operate brake pedal.

Do not operate accelerator pedal. Press Start/Stop button.

Release button after starting procedure begins. Diesel engine starts after control indicator z for preheating extinguishes.

Before restarting or to switch off the engine when vehicle is stationary, press Start/Stop once more briefly.

To start the engine during an Autostop: Manual transmission: during an

Autostop, the engine can be started by depressing the clutch pedal 3 107.

Automatic transmission: during an Autostop, the engine can be started by releasing the brake pedal 3 107.

Emergency shut off during driving If the engine needs to be switched off during driving in case of emergency, press Start/Stop for 5 seconds.

Driving and operating 107

9 Danger

Switching off the engine during driving may cause loss of power support for brake and steering systems. Assistance systems and airbag systems are disabled. Lighting and brake lights will extinguish. Therefore power down the engine and ignition while driving only when required in case of emergency.

Starting the vehicle at low temperatures Starting the engine without additional heaters is possible down to -25 for diesel engines and -30 C for petrol engines. Required is an engine oil with the correct viscosity, the correct fuel, performed services and a sufficiently charged vehicle battery. With temperatures below -30 C the automatic transmission requires a warming phase of approx. 5 minutes. The selector lever must be in position P.

Turbo engine warm-up Upon start-up, engine available torque may be limited for a short time, especially when the engine temperature is cold. The limitation is to allow the lubrication system to fully protect the engine.

Overrun cut-off The fuel supply is automatically cut off during overrun, i.e. when the vehicle is driven with a gear engaged but accelerator pedal is released. Depending on driving conditions, the overrun cut-off may be deactivated.

Stop-start system The stop-start system helps to save fuel and to reduce the exhaust emissions. When conditions allow, it switches off the engine as soon as the vehicle is at a low speed or at a standstill, e.g. at a traffic light or in a traffic jam.

Activation The stop-start system is available as soon as the engine is started, the vehicle starts-off and the conditions as stated below in this section are fulfilled.

The system is ready to operate when the LED in the button D is not illuminated. To activate the system when the system is deactivated, press D. If the stop-start system is temporarily not available and the button D is pressed, the LED in the button flashes.

108 Driving and operating

Deactivation Deactivate the stop-start system manually by pressing D. The deactivation is indicated when the LED in the button illuminates.

Autostop Vehicles with manual transmission Activate an Autostop as follows: Set the selector lever to neutral. Release the clutch pedal.

The engine will be switched off while the ignition stays on. Vehicles with automatic transmission If the vehicle is at a standstill with depressed brake pedal, Autostop is activated automatically. The engine will be switched off while the ignition stays on. The stop-start system will be disabled on steep inclines.

Indication

An Autostop is indicated by control indicator n. During an Autostop, the heating and brake performance will be maintained.

Conditions for an Autostop The stop-start system checks if each of the following conditions is fulfilled. The stop-start system is not

manually deactivated. The driver's door is closed or the

driver's seat belt is fastened. The vehicle battery is sufficiently

charged and in good condition. The engine is warmed up. The engine coolant temperature

is not too high.

The engine exhaust temperature is not too high, e.g. after driving with high engine load.

The ambient temperature is not too low or too high.

The climate control system allows an Autostop.

The brake vacuum is sufficient. The self-cleaning function of the

exhaust filter is not active. The vehicle was driven at least at

walking speed since the last Autostop.

Autostop will be inhibited if these conditions are not met. In addition, Autostop may be inhibited by certain settings of the climate

control system 3 93 immediately after higher speed

driving in the case of new vehicle

running-in 3 104 by active demisting in the case of steep ascending or

descending slopes

Driving and operating 109

Notice The Autostop may be inhibited for several hours after a battery replacement or reconnection.

Vehicle battery discharge protection To ensure reliable engine restarts, several vehicle battery discharge protection features are implemented as part of the stop-start system.

Power saving measures During an Autostop, several electrical features such as auxiliary electric heater or rear window heating are disabled or switched to a power saving mode. The fan speed of the climate control system is reduced to save power.

Restart of the engine by the driver

Vehicles with manual transmission Depress the clutch pedal without depressing the brake pedal to restart the engine.

Vehicles with automatic transmission The engine is restarted in the following cases: brake pedal released while D or

M is selected brake pedal released or N

selected when selector is moved to select D or M

selector is moved to select R

Restart of the engine by the stop- start system Vehicles with manual transmission: The selector lever must be in neutral to enable an automatic restart. If one of the following conditions occurs during an Autostop, the engine will be restarted automatically by the stop-start system: stop-start system manually

deactivated driver's seat belt unfastened and

driver's door opened engine temperature too low charging level of vehicle battery

below a defined level brake vacuum not sufficient

vehicle is driven or rolls at least at walking speed

climate control system requests engine start

air conditioning manually switched on

the bonnet is opened If an electrical accessory, e.g. a portable CD player, is connected to the power outlet, a brief power drop during the restart might be noticeable.

Parking

9 Warning

Do not park the vehicle on an easily ignitable surface. The high temperature of the exhaust system could ignite the surface.

Always apply the parking brake.

If the vehicle is on a level surface or uphill slope, engage first gear or set the selector lever to position P. On an uphill

110 Driving and operating

slope, turn the front wheels away from the kerb. If the vehicle is on a downhill slope, engage reverse gear or set the selector lever to position P. Turn the front wheels towards the kerb.

Close the windows. Switch off the engine. Remove the ignition key from

the ignition switch or switch off ignition on vehicles with power button. Turn the steering wheel until the steering wheel lock is felt to engage.

Lock the vehicle. Activate the anti-theft alarm

system. The engine cooling fans may run

after the engine has been switched off 3 180.

Caution

After running at high engine speeds or with high engine loads, operate the engine briefly at a low load or run in neutral for approx. 30 seconds before switching off, in order to protect the turbocharger.

Notice In the event of an accident with airbag deployment, the engine is switched off automatically if the vehicle comes to a standstill within a certain time.

In countries with extremely low temperatures it may be necessary to park the vehicle without applied parking brake. Make sure to park the vehicle on a level surface. Parking brake 3 122.

Engine exhaust

9 Danger

Engine exhaust gases contain poisonous carbon monoxide, which is colourless and odourless and could be fatal if inhaled. If exhaust gases enter the interior of the vehicle, open the windows. Have the cause of the fault rectified by a workshop. Avoid driving with an open load compartment, otherwise exhaust gases could enter the vehicle.

Exhaust filter Automatic cleaning process The exhaust filter system filters soot particles out of the exhaust gases. The start of saturation of the exhaust filter is indicated by the temporary illumination of t or C, accompanied by a message in the Driver Information Centre.

Driving and operating 111

As soon as the traffic conditions permit, regenerate the filter by driving at a vehicle speed of at least 40 mph until the control indicator extinguishes. Notice On a new vehicle, the first exhaust filter regeneration operations may be accompanied by a burning smell, which is normal. Following prolonged operation of the vehicle at very low speed or at idle, water vapour can be emitted at the exhaust on acceleration. This does not affect the behaviour of the vehicle or the environment.

Cleaning process not possible If t or C stays on, accompanied by an audible signal and a message, this indicates that the exhaust filter additive level is too low. The reservoir must be topped-up without delay. Seek the assistance of a workshop.

Catalytic converter The catalytic converter reduces the amount of harmful substances in the exhaust gases.

Caution

Fuel grades other than those listed on pages 3 173, 3 224 could damage the catalytic converter or electronic components. Unburnt petrol will overheat and damage the catalytic converter. Therefore avoid excessive use of the starter, running the fuel tank dry and starting the engine by pushing or towing.

In the event of misfiring, uneven engine running, a reduction in engine performance or other unusual problems, have the cause of the fault rectified by a workshop as soon as possible. In an emergency, driving can be continued for a short period, keeping vehicle speed and engine speed low.

AdBlue General information The selective catalytic reduction (BlueInjection) is a method to substantially reduce the nitrogen oxides in the exhaust emission. This is achieved by injecting a Diesel Exhaust Fluid (DEF) into the exhaust system. The ammonia released by the fluid reacts with nitrous gases (NOx) from the exhaust and turns it into nitrogen and water. The designation of this fluid is AdBlue. It is a non-toxic, non- flammable, colourless and odourless fluid which consists of 32% urea and 68% water.

9 Warning

Avoid contact of your eyes or skin with AdBlue. In case of eye or skin contact, rinse off with water.

112 Driving and operating

Caution

Avoid contact of the paintwork with AdBlue. In case of contact, rinse off with water.

AdBlue freezes at a temperature of approx. -11 C. As the vehicle is equipped with an AdBlue pre-heater, the emissions reduction at low temperatures is ensured. The AdBlue pre-heater works automatically. Notice Frozen and again liquefied AdBlue is usable without quality loss.

The typical AdBlue consumption is approx. 0.85 l per 600 miles, but can also be higher depending on driving behaviour (e.g. high load or towing).

Level warnings Depending on the calculated range of AdBlue, different messages are displayed in the Driver Information Centre. The messages and the restrictions are a legal requirement.

1. The first warning level is entered when the estimated AdBlue range is between 1500 miles and 500 miles. When switching on the ignition, this warning will show up once briefly with the calculated range. Additionally, control indicator u will illuminate and a chime will sound. Driving is possible without any restrictions.

2. The next warning level is entered when the estimated AdBlue range is below 500 miles. The message with the current range will always be displayed when ignition is switched on. Additionally, control indicator u will flash and a chime will sound. Refill AdBlue before entering the next warning level.

3. The next warning level is entered with a range below 60 miles. The message with the current range will always be displayed when ignition is switched on. Additionally, control indicator u will flash and a chime will sound. Refill AdBlue as soon as possible before the AdBlue tank is

completely empty. Otherwise, a restart of the engine will not be possible.

4. The last warning level is entered when the AdBlue tank is empty. Restart of the engine is not possible. A message appears in the Driver Information Centre. Additionally, control indicator u will flash and a chime will sound. Refill the tank to a level of at least 5 l of AdBlue, otherwise restarting of the engine is not possible.

High emission warnings In the event of a fault with the emissions control system, different messages are displayed in the Driver Information Centre. The messages and the restrictions are a legal requirement. The warning messages are accompanied by the control indicators u, C and W. Additionally, a chime will sound. Follow the instructions of the warning messages. If starting is prevented, seek the assistance of a workshop.

Driving and operating 113

Refilling AdBlue

Caution

Only use AdBlue that complies with European standards DIN 70 070 and ISO 22241-1. Do not use additives. Do not dilute AdBlue. Otherwise the selective catalytic reduction system could be damaged.

Notice Whenever a filling pump with a nozzle for passenger cars is not available at a filling station, use only AdBlue bottles or canisters with a sealed refill adapter for refilling, to prevent splashback and overspill, and in order to ensure that the fumes from the tank are captured and do not emerge. AdBlue in bottles or canisters is available in many filling stations and can be purchased e.g. at Vauxhall dealers and other retail outlets.

Since AdBlue has a limited durability, check the date of expiry before refilling. Notice Refill the tank to a level of at least 5 l to ensure that the new AdBlue level is being detected. In case AdBlue refill is not successfully detected: 1. Continuously drive the vehicle

for 10 min making sure that vehicle speed is always higher than 12 mph.

2. If AdBlue refill is detected successfully, AdBlue supply- driven warnings or limitations will disappear.

If AdBlue refill is still not detected, seek the assistance of a workshop. If AdBlue must be refilled at temperatures below -11 C, the refilling of AdBlue may not be detected by the system. In this event, park the vehicle in a space with a higher ambient temperature until AdBlue is liquified.

Notice When unscrewing the protective cap from the filler neck, ammonia fumes may emerge. Do not inhale as the fumes have a pungent smell. The fumes are not harmful by inhalation.

The AdBlue tank should be filled completely. This must be done if the warning message regarding prevention of an engine restart is already displayed. AdBlue refilling quantity 3 225. The vehicle must be parked on a level surface. The filler neck for AdBlue is located behind the fuel filler flap. The fuel filler flap can only be opened if the vehicle is unlocked. 1. Switch off the ignition. 2. Close all doors to avoid ammonia

fumes entering the interior of the vehicle.

3. Release the fuel filler flap by pushing the flap 3 175.

114 Driving and operating

4. Unscrew protective cap from the filler neck.

5. Open AdBlue canister. 6. Mount one end of the hose on the

canister and screw the other end on the filler neck.

7. Lift the canister until it is empty, or until the flow from the canister has stopped.

8. Place the canister on the ground to empty the hose, wait 15 seconds.

9. Unscrew the hose from the filler neck.

10. Mount the protective cap and turn clockwise until it engages.

Notice Dispose of AdBlue canister according to environmental requirements. Hose can be reused after flushing with clear water before AdBlue dries out.

Electric drive unit Operation

The vehicle uses an electric drive unit with a 1-gear transmission. The selector is located on the centre console between the seats. P : park position, wheels are locked,

engage only when the vehicle is stationary, engaged automatically when driver's door is opened or engine is switched off

R : reverse gear, engage only when the vehicle is stationary

N : neutral

Driving and operating 115

D : drive mode, low recuperation B : regenerative braking

Shifting Shifting always starts from a centre position and is operated by moving the selector. Once operated, the selector will return to the centre position.The selected mode is indicated in the instrument cluster. Park mode P This mode locks the front wheels. It is the recommended mode when starting the propulsion system because the vehicle cannot move easily.

9 Warning

Do not leave the vehicle when the propulsion system is running, the vehicle may move suddenly. You or others can be injured. To be sure the vehicle will not move, even if you are on even ground, make sure the parking brake is applied and P is selected.

The electric drive unit automatically shifts to P if the vehicle is stopped the driver's door is opened while

the vehicle's speed is below 1 mph

The vehicle will not shift into P if it is moving too fast. Stop the vehicle and shift into P. To shift into P, press button P. To shift out of P: Depress the brake pedal and select the desired mode. Reverse gear R To shift into and out of R, the vehicle must be at standstill and the brake pedal has to be depressed.

Caution

Shifting into R while the vehicle is moving forward could damage the electric drive unit. Only shift into R after the vehicle has been stopped.

Neutral N In this mode, the propulsion system does not transfer torque to the wheels. To restart the propulsion system when the vehicle is already moving, use D only. Drive mode D

Caution

If the vehicle seems to accelerate slowly or not respond when you try to go faster, do not continue your journey. The electric drive unit could be damaged. Consult a workshop as soon as possible.

Notice In slippery conditions, operate the vehicle in D for enhanced riding and handling performance.

Regenerative braking mode B In this mode, vehicle speed is significantly reduced by releasing the accelerator pedal, without operating the brake pedal. Use B when driving down steep hills, in deep snow, in mud or in stop-and- go traffic.

116 Driving and operating

9 Warning

In the case of extreme temperatures or if the high voltage battery is almost fully charged, the brake force of the regenerative braking may be temporarily reduced. If the braking force is not sufficient, the driver has to be prepared to use the brake pedal.

B can only be activated if D is selected. Press buttonB. To deactivate B, press button B. Regenerative braking 3 124.

Caution

Spinning the tyres or holding the vehicle in one place on a hill using only the accelerator pedal may damage the electric drive unit. If you are stuck, do not spin the tyres. When stopping on a hill, use the brakes to hold the vehicle in place.

Deactivating the automatic operation of P mode for electric vehicles The procedure for the deactivation of the automatic operation of P mode also deactivates the automatic operation of the electric parking brake. For this procedure, refer to the description of the automatic parking brake. Parking brake 3 122

Automatic transmission The automatic transmission permits automatic gearshifting (automatic mode) or manual gearshifting (manual mode). Manual mode 3 118.

Transmission display The mode or selected gear is shown in the Driver Information Centre. In automatic mode, the driving programme is indicated by D. In manual mode, M and the number of the selected gear is indicated. R indicates reverse gear. N indicates neutral mode. P indicates park mode. B indicates regenerative braking mode.

Driving and operating 117

Gear selection

Move the selector or press the respective buttons. P : park position, wheels are locked,

engage only when the vehicle is stationary, engaged automatically when driver's door is opened or engine is switched off

R : reverse gear, engage only when the vehicle is stationary

N : neutral D : automatic mode M : manual mode

Shifting Shifting always starts from a centre position and is operated by moving the selector. Once operated, the selector will return to the centre position.The selected mode is indicated in the instrument cluster. Park position P This mode locks the front wheels. P is automatically engaged when ignition is switched off. The vehicle automatically shifts into P if the vehicle is stopped the driver's door is opened while

the vehicle's speed is below 1 mph

The vehicle will not shift into P if it is moving too fast. Stop the vehicle and shift into P. To shift into P, press button P. To shift out of P: Depress the brake pedal and select the desired mode. Reverse gear R To shift into and out of R, the vehicle must be at standstill and the brake pedal has to be depressed.

Caution

Shifting into R while the vehicle is moving forward could damage the electric drive unit. Only shift into R after the vehicle has been stopped.

Neutral N In this mode, the propulsion system does not transfer torque to the wheels. To restart the propulsion system when the vehicle is already moving, use D only. When N is selected and ignition is switched off, P is engaged after a short time. Automatic mode D Notice In slippery conditions, operate the vehicle in D for enhanced riding and handling performance.

Manual mode M In this mode, it is possible to change gears manually using steering the wheel paddles. Manual mode 3 118.

118 Driving and operating

Engine braking To utilise the engine braking effect, select a lower gear in good time when driving downhill. Manual mode 3 118.

Deactivation of the automatic operation of park position P and of electric parking brake For this procedure, refer to the description of the automatic parking brake. Parking brake 3 122

Manual mode Manual mode M can be activated from position D in each driving situation and speed. The selected gear is indicated in the instrument cluster. If a higher gear is selected when vehicle speed is too low, or a lower gear when vehicle speed is too high, the shift is not executed. This can cause a message in the Driver Information Centre.

In manual mode, no automatic shifting to a higher gear takes place at high engine revolutions.

Press button M. Pull steering wheel paddles to select gears manually. Pull right paddle + to shift to a higher gear. Pull left paddle - to shift to a lower gear. Multiple pulls allow gears to be skipped.

Gear shift indication The symbol Y or Z with a number beside it is indicated when gearshifting is recommended for fuel saving reasons. Shift indication appears only in manual mode.

Electronic driving programmes Following a cold start, the operating temperature programme increases engine speed to quickly bring the catalytic converter to the required temperature. Special programmes automatically adapt the shifting points when driving up inclines or down hills. In snowy or icy conditions or on other slippery surfaces, the electronic transmission control enables the driver to select manually first, second or third gear for starting off.

Driving and operating 119

Kickdown Pressing down the accelerator pedal beyond the kickdown detent will lead to maximum acceleration independent of selected driving mode. The transmission shifts to a lower gear depending on engine speed.

Fault In the event of a fault, C illuminates a message is displayed in the Driver Information Centre. Vehicle messages 3 79. Electronic transmission control enables only third gear. The transmission no longer shifts automatically. Do not drive faster than 62 mph. Have the cause of the fault remedied by a workshop.

Interruption of power supply In the event of an interruption of power supply, it is not possible to select another mode when P is selected. Towing the vehicle 3 209. If the vehicle battery is discharged, start the vehicle using jump leads 3 207. If the vehicle battery is not the cause of the fault, seek the assistance of a workshop.

Manual transmission

To engage reverse, depress the clutch pedal, pull the ring under the selector lever and move the selector lever quite to the left and front. If the gear does not engage, set the selector lever to neutral, release the clutch pedal and depress again. Then repeat gear selection. Do not slip the clutch unnecessarily. When operating, depress the clutch pedal completely. Do not use the pedal as a foot rest.

120 Driving and operating

When clutch slip is detected for a specific time, the engine power will be reduced. A warning is displayed in the Driver Information Centre. Release the clutch.

Caution

It is not advisable to drive with the hand resting on the selector lever.

Gear shift indication 3 72. Stop-start system 3 107.

Drive systems Drive modes Following drive modes are selectable: Normal mode Sport mode Eco mode

Each drive mode corresponds to a different vehicle setting.

To select the respective drive mode, use the shown toggle switch.

Normal mode The settings in this mode are set by default. Everytime the ignition is switched on, this mode is selected. Electric vehicle: To optimise range, electric engine power output is reduced.

Sport mode The settings in this mode allow more dynamic driving. The vehicle's dynamic parameters can be displayed in the Driver Information Centre. Electric vehicle: This mode allows maximum electric engine power output.

Eco mode Reduces fuel consumption by optimising the operation of the heating and air conditioning and, depending on version, the accelerator pedal, the automatic transmission and the gear shifting indicator. While coasting the vehicle, the engine is idling with reduced engine brake.

Driving and operating 121

Electric vehicle: To optimise range, electric engine power output is reduced and heating is switched off.

Brakes Antilock brake system Antilock brake system (ABS) prevents the wheels from locking. ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains steerable, even during hard braking. ABS control is made apparent through a pulse in the brake pedal and the noise of the regulation process. For optimum braking, keep the brake pedal fully depressed throughout the braking process, despite the fact that the pedal is pulsating. Do not reduce the pressure on the pedal. When braking in an emergency, the hazard warning flashers are switched on automatically depending on the force of deceleration. They are switched off automatically the first time you accelerate. After starting off, the system performs a self-test which may be audible.

Control indicator i 3 72.

Fault

9 Warning

If there is a fault in the ABS, the wheels may be liable to lock due to braking that is heavier than normal. The advantages of ABS are no longer available. During hard braking, the vehicle can no longer be steered and may swerve.

Have the cause of the fault remedied by a workshop.

122 Driving and operating

Parking brake

9 Warning

Before leaving the vehicle, check parking brake status. Control indicator j illuminate constantly when electric parking brake is applied.

Applying when vehicle is stationary

9 Warning

Pull switch m for a minimum of 1 second until control indicator m illuminates constantly and electric parking brake is applied. The electric parking brake operates automatically with adequate force. Before leaving the vehicle, check the electric parking brake status. Control indicator m 3 71.

The electric parking brake can always be activated, even if the ignition is off. Do not operate electric parking brake system too often without engine running as this will discharge the vehicle battery.

Releasing Switch on ignition. Keep foot brake pedal depressed and then push switch j.

Drive away function Vehicles with manual transmission: Depressing the clutch pedal and then slightly releasing the clutch pedal and slightly depressing the accelerator pedal releases the electric parking brake automatically. This is only possible if the automatic operation of the electric parking brake is activated. It is not possible when switch j is pulled at the same time. Vehicles with automatic transmission: Engaging R, D or M and then depressing the accelerator pedal releases the electric parking brake automatically. This is only possible if the automatic operation of the electric parking brake is activated. It is not possible when switch j is pulled at the same time.

Braking when vehicle is moving When the vehicle is moving and the switch j is kept pulled, the electric parking brake system will decelerate the vehicle. As soon as the switch j is released, braking will be stopped.

Driving and operating 123

The antilock brake system and the Electronic Stability Control stabilise the vehicle while the switch j is kept pulled. If an error of the electric parking brake occurs, a warning message is displayed in the driver information centre. If the antilock brake system and the Electronic Stability Control fail, one or both indicators i and J illuminate in the instrument cluster. In this case, stability during deceleration of the vehicle can only be maintained with repeated short pulls of the switch until the vehicle is immobilised.

Automatic operation Automatic operation includes automatic application and automatic release of the electric parking brake. The electric parking brake can also be applied or released manually by using the switch j.

Automatic application: The electric parking brake is

automatically applied when the vehicle is stationary and the ignition is switched off.

j illuminates in the instrument cluster and a display message pops up to confirm the application.

Automatic release: Notice The automatic release of the electric parking brake is inhibited as long as the driver's door is open. Parking brake releases

automatically on driving off. j extinguishes in the

instrument cluster and a display message pops up to confirm the release.

Deactivation of automatic operation (combustion engine vehicle with manual transmission) 1. Start the engine. 2. If the parking brake is released,

apply the parking brake pulling the switch j.

3. Take your foot off the brake pedal. 4. Press the switch j for at least

10 seconds and maximum 15 seconds.

5. Release the switch j. 6. Depress and hold the brake

pedal. 7. Pull the switch j for 2 seconds.

The deactivation of the automatic operation of the electric parking brake is confirmed by o illuminating in the instrument cluster 3 72. The electric parking brake can only be applied and released manually. To reactivate the automatic operation, repeat the steps described above. Deactivation of automatic operation (combustion engine vehicle with automatic transmission and electric vehicle) This procedure will deactivate the automatic operation of the electric parking brake as well as the automatic selection of P mode.

124 Driving and operating

In certain situations such as following, it is necessary to deactivate the automatic operation of the electric parking brake and the automatic selection of P mode: while being towed on a rolling road in an automatic car wash while being transported by rail or

sea freight For the deactivation, the vehicle must be stationary and the engine must be switched on. 1. Depress the brake pedal and

select N. 2. Within 5 seconds, depress and

hold the brake pedal. 3. Switch off ignition and move the

selector forwards or backwards. 4. Release the brake pedal and

switch on ignition. 5. Depress and hold the brake pedal

and push the switch j. 6. Release the brake pedal and

switch off ignition.

The deactivation will be confirmed by a message and will be cancelled after 15 minutes. To previously return to normal operation, depress the brake pedal and start the engine.

Fault Failure mode of electric parking brake is indicated by a control indicator k and by a message displayed in the Driver Information Centre. Vehicle messages 3 79. Control indicator j flashes: electric parking brake is not fully applied or released. When continuously flashing, release electric parking brake and retry applying.

Brake assist If brake pedal is depressed quickly and forcefully, maximum brake force is automatically applied. Operation of brake assist might become apparent by a pulse in the brake pedal and a greater resistance when depressing the brake pedal.

Maintain steady pressure on the brake pedal as long as full braking is required. Maximum brake force is automatically reduced when brake pedal is released.

Hill start assist The system helps prevent unintended movement when driving away on inclines. When releasing the brake pedal after stopping on an incline, brakes remain on for further 2 seconds. The brakes release automatically as soon as the vehicle begins to accelerate.

Regenerative braking

9 Warning

While using regenerative braking, the brake lights do not illuminate. If the succeeding traffic is to be warned, depress the brake pedal.

Driving and operating 125

Regenerative braking generates electrical energy resulting from engine braking to charge the high voltage battery. Regenerative power may be limited when the high voltage battery is fully charged. If B is selected, energy is regenerated when the accelerator pedal is lifted.

B can only be activated if D is selected. Press buttonB. To deactivate B, press button B. Electric drive unit 3 114.

Ride control systems Electronic Stability Control and Traction Control system Electronic Stability Control improves driving stability when necessary, regardless of the type of road surface or tyre grip. As soon as the vehicle starts to swerve (understeer / oversteer), engine output is reduced and the wheels are braked individually. Electronic Stability Control operates in combination with the Traction Control system. It prevents the driven wheels from spinning. The Traction Control system is a component of the Electronic Stability Control. The Traction Control system improves driving stability when necessary, regardless of the type of road surface or tyre grip, by preventing the driven wheels from spinning.

As soon as the driven wheels starts to spin, engine output is reduced and the wheel spinning the most is braked individually. This considerably improves the driving stability of the vehicle on slippery road surfaces.

Electronic Stability Control and the Traction Control system are operational after each engine start as soon as the control indicator J extinguishes. When Electronic Stability Control or the Traction Control system operates, J flashes. On some occasions, e.g. after disconnecting the vehicle battery, the control indicator J may illuminate during some seconds accompanied by a message in the Driver Information Centre. This may be caused by the reset of the steering angle sensor.

126 Driving and operating

9 Warning

Do not let this special safety feature tempt you into taking risks when driving. Adapt speed to the road conditions.

Control indicator b 3 73.

Deactivation The Traction Control system can be deactivated in the Info Display. Info Display 3 77. Deactivation is confirmed by a message in the Driver Information Centre.

Fault If there is a fault in the system, the control indicator J illuminates continuously, a message appears in the Driver Information Centre and a warning chime sounds. The system is not operational. Have the cause of the fault remedied by a workshop.

Sport mode

Sport mode adapts the settings of some vehicle systems to a sportier driving style: The engine reacts more quickly

to accelerator pedal changes. Steering support is sportier.

Activation Press SPORT when engine is running. The LED in the button illuminates when sport mode is active.

Deactivation Press SPORT. The LED in the button extinguishes when sport mode is deactivated.

Driving and operating 127

Driver assistance systems

9 Warning

Driver assistance systems are developed to support the driver and not to replace the driver's attention. The driver accepts full responsibility when driving the vehicle. When using driver assistance systems, always take care regarding the current traffic situation.

9 Warning

The usage of a license plate support on the front bumper may affect the proper radar unit functionality. When using a license plate support, follow the markings and indications on the front bumper.

Cruise control The cruise control can store and maintain speeds above 25 mph. Additionally, at least the third gear must be engaged on some manual transmissions. On automatic transmission, position D or the second or a higher gear in position M must be selected. Deviations from the stored speeds may occur when driving uphill or downhill. The system maintains the vehicle speed at the preset speed by the driver, without any action on the accelerator pedal. The preset speed can be exceeded temporarily by pressing the accelerator pedal firmly. The status and preset speed is displayed in the Driver Information Centre. Do not use the cruise control if it is not advisable to maintain a constant speed.

Switching on the system

Press v. Symbol v and a message are displayed in the Driver Information Centre. The system is still not active.

128 Driving and operating

Activation of the functionality

Setting speed by the driver

Accelerate to the desired speed and move thumb wheel once briefly to SET/-. The current speed is stored and maintained. Accelerator pedal can be released. The preset speed can then be changed by moving thumb wheel to RES/+ to increase or SET/- to decrease the speed. Move thumb wheel repeatedly to change speed in small steps, move and hold to change speed in large steps.

Speed value is indicated in the Driver Information Centre.

Adopting speed by the speed limit recognition A detected speed limit can be used as new value for the cruise control. If the cruise control is active, MEM illuminates if the difference between set speed and speed limit is more than 6 mph. Press MEM on the steering wheel to request saving of the suggested speed. Press MEM on the steering wheel once more to confirm and save the new speed setting. The function can be activated or deactivated in the vehicle personalisation 3 80. Traffic sign assistant 3 157.

Exceeding the set speed Vehicle speed can be increased by depressing the accelerator pedal. When the accelerator pedal is released, the previously stored speed is resumed.

Deactivation of the functionality Press i, cruise control is in pause mode and a message is displayed. The vehicle is driven without cruise control. Cruise control is deactivated, but not switched off. Last stored speed remains in memory for later speed resume. Cruise control is deactivated automatically in the following cases: The brake pedal is depressed. Vehicle speed is below 25 mph. The traction control system or

electronic stability control is operating.

The selector lever is in N (automatic transmission) or the first or second gear (on some manual transmissions) is engaged.

The clutch pedal has been depressed for a few seconds (depending on the manual transmission).

Driving and operating 129

Resume stored speed Move thumb wheel to RES/+ at a speed above 25 mph. The stored speed will be obtained.

Switching off the system Press v, the cruise control mode is deselected and the cruise control indication extinguishes in the Driver Information Centre. Pressing 5 to activate the speed limiter deactivates cruise control. Switching off the ignition cancels any programmed speed value.

Fault In the event of a cruise control fault, the speed is cleared resulting in flashing of the dashes. The speed limit recognition may not operate correctly if traffic signs do not comply with the Vienna Convention on Road Signs and Signals.

Speed limiter The speed limiter prevents the vehicle from exceeding a preset maximum speed. The maximum speed can be set at speeds above 18 mph. The driver can accelerate the vehicle up to the preset speed. Deviations from the limited speed may occur when driving downhill. The preset speed can be exceeded temporarily by pressing the accelerator pedal firmly. The status and preset speed limit are displayed in the Driver Information Centre.

Switching on the system

Press 5. 5 and a message are displayed in the Driver Information Centre. The system is still not active.

130 Driving and operating

Activation of the functionality

Setting speed by the driver

The preset maximum speed can be set by pressing thumb wheel to RES/+ to increase or SET/- to decrease the desired maximum speed. Move thumb wheel repeatedly to change speed in small steps, move and hold to change speed in large steps. Speed value is indicated in the Driver Information Centre.

Press i to activate speed limiter.

Adopting speed by the speed limit recognition A detected speed limit can be used as new value for the speed limiter. If the speed limiter is active, MEM illuminates if the difference between set speed and speed limit is more than 6 mph. Press MEM on the steering wheel to request saving of the suggested speed limit. Press MEM on the steering wheel once more to confirm and save the new speed setting.

The function can be activated or deactivated in the vehicle personalisation 3 80. Traffic sign assistant 3 157.

Exceeding the speed limit In the event of an emergency, it is possible to exceed the speed limit by depressing the accelerator pedal firmly to the final point. In this case, the preset speed value flashes. Release the accelerator pedal and the speed limiter function is reactivated once a speed lower than the limit speed is obtained.

Deactivation of the functionality Press i, speed limiter is in pause mode and a message is displayed. The vehicle is driven without speed limiter. Speed limiter is deactivated, but not switched off. Last stored speed remains in memory for later speed resume.

Driving and operating 131

Resume limit speed Press i, the stored speed limit will be obtained.

Switching off the system Press 5, the speed limiter mode is deselected and the speed limit indication extinguishes in the Driver Information Centre. Pressing v to activate cruise control deactivates speed limiter. The preset speed remains in the memory when the ignition is switched off.

Fault In the event of a speed limiter fault, the speed is cleared resulting in flashing of the dashes. The speed limit recognition may not operate correctly if traffic signs do not comply with the Vienna Convention on Road Signs and Signals.

Adaptive cruise control The adaptive cruise control is an enhancement of the cruise control with the additional feature of maintaining a certain following distance to the vehicle ahead.

It uses radar and camera sensors to detect the vehicles ahead. If no vehicle is detected in the driving path, the adaptive cruise control will behave like a conventional cruise control. The adaptive cruise control automatically decelerates the vehicle when approaching a slower moving vehicle. It then adjusts the vehicle speed to follow the vehicle ahead at the selected following distance. The vehicle speed increases or decreases to follow the vehicle ahead, but will

not exceed the set speed. It may apply limited braking with activated brake lights. If the vehicle ahead accelerates or changes lane, the adaptive cruise control progressively accelerates the vehicle to return to the stored set speed. If the driver operates the turn lights to overtake a slower vehicle, the adaptive cruise control allows the vehicle to temporarily approach the vehicle ahead to help passing it. However, the set speed will never be exceeded. The adaptive cruise control can store set speeds over 18 mph for manual transmission. If the vehicle ahead is moving too slowly and the selected following distance cannot be maintained anymore, a warning chime is given and a message is displayed in the Driver Information Centre. The message prompts the driver to take back control of the vehicle. On vehicles with automatic transmission, the system can brake the vehicle until a full stop. Depending on variant, the system can automatically accelerate the vehicle after a full stop.

132 Driving and operating

9 Warning

The complete driver attention is always required while driving with adaptive cruise control. The driver stays fully in control of the vehicle because the brake pedal, the accelerator pedal and the button have priority over any adaptive cruise control operation.

Switching on the system

Press w. w is indicated in the Driver Information Centre. The system is still not active.

Activation of the functionality

Setting speed by the driver The adaptive cruise control has to be switched on manually at a speed between 18 mph and 112 mph. For vehicles with automatic transmission, the automatic selector lever must be in position D or M. Accelerate to the desired speed and move the thumb wheel to SET/-. The current speed is stored and maintained. The speed value is indicated in the Driver Information Centre. The preset speed can then be changed by moving thumb wheel to RES/+ to increase or SET/- to decrease the speed. Move thumb wheel repeatedly to change speed in small steps, move and hold to change speed in large steps. When the adaptive cruise control is operating, the stop-start system is automatically deactivated.

Adopting speed by the speed limit recognition A detected speed limit can be used as new value for the adaptive cruise control. If the adaptive cruise control is active, MEM illuminates if the difference between set speed and speed limit is more than 6 mph. Press MEM on the steering wheel to request saving of the suggested speed. Press MEM on the steering wheel once more to confirm and save the new speed setting. The function can be activated or deactivated in the vehicle personalisation 3 80. Traffic sign assistant 3 157.

Overriding set speed It is always possible to drive faster than the selected set speed by depressing the accelerator pedal. When the accelerator pedal is released, the vehicle returns to the stored speed. If a slower moving

Driving and operating 133

vehicle is ahead, the following distance selected by the driver is restored. If the set speed is exceeded, the indicated speed setting disappears and a warning message is displayed.

9 Warning

Accelerating by the driver deactivates automatic braking by the system. This is indicated as a pop-up warning in the Driver Information Centre.

Resuming stored speed Move the thumb wheel to RES/+ at a speed above 25 mph. The adaptive cruise control is activated with the stored set speed.

Adaptive cruise control on vehicles with automatic transmission For vehicles with automatic transmission, adaptive cruise control allows to maintain the selected distance behind a braking vehicle until a complete stop is reached. If the system has stopped your vehicle behind another vehicle, then the set speed is replaced by a green control indicator .. This symbol notifies, that the vehicle is hold automatically in stop position. When the vehicle ahead drives away within some seconds and the traffic conditions allow a restart of the vehicle, then active cruise control is resumed automatically. If the stopped vehicle ahead was stopped for a longer time and then begins to move forward, the green control indicator . will flash and a warning chime will sound as a reminder to check traffic before resuming.

When the vehicle ahead drives away, depress the accelerator pedal or press i to resume adaptive cruise control. If the vehicle stays stopped for more than 5 minutes or if the driver's door is opened and the driver's seat belt is unfastened, then the electric parking brake is applied automatically to hold the vehicle. Control indicator j will illuminate. To release electric parking brake, press the accelerator pedal. Electric parking brake 3 122.

9 Warning

When the system is deactivated or cancelled, the vehicle will no longer be held at a stop and can start moving. Be always prepared to manually apply the brake to hold the vehicle stationary. Do not leave the vehicle while it is being held at a stop by adaptive cruise control. Always move selector lever to park position P and switch off the ignition before leaving the vehicle.

134 Driving and operating

Setting the following distance When adaptive cruise control detects a slower moving vehicle in the driving path, it will adjust the vehicle speed to maintain the following distance selected by the driver. The following distance can be set to close (1 bar), normal (2 bars) or far (3 bars). If the engine is running and the adaptive cruise control is enabled (grey) or active (green), you can modify the following distance setting: Press V, the current setting is shown in the Driver Information Centre. Press V again to change the following distance: The new setting is displayed in the Driver Information Centre. The selected following distance is indicated by full bars in the adaptive cruise control page.

9 Warning

The driver accepts full responsibility for the appropriate following distance based on traffic, weather and visibility conditions. Following distance must be adjusted or the system switched off when required by the prevailing conditions.

Detecting the vehicle ahead If the system detects a vehicle in the driving path, the adaptive cruise control symbol displayed in the Driver Information Centre changes from - to w.

Deactivation of the functionality

Press i, the adaptive cruise control is in pause mode and a message is displayed. The vehicle is driven without adaptive cruise control. The adaptive cruise control is deactivated, but not disabled. The last stored set speed remains in memory for later usage.

Driving and operating 135

The adaptive cruise control is deactivated automatically in the following cases: The brake pedal is depressed. The vehicle accelerates above

112 mph (manual and automatic transmission) or slows down below 25 mph (manual transmission).

The electric parking brake is applied.

The traction control system or electronic stability control is deactivated or operating.

The selector lever of automatic transmissions is neither in D nor in M.

A fault is detected in the electronic stability control, the radar system or the camera system.

Immediately after the clutch pedal has been depressed or a few seconds after the clutch pedal has been depressed (depending on the manual transmission).

Switching off the system Press w, the adaptive cruise control mode is disabled and the adaptive cruise control indication extinguishes in the Driver Information Centre. Pressing 5 to activate the speed limiter deactivates adaptive cruise control. Switching off the ignition deletes the stored set speed.

Driver's attention Use the adaptive cruise control

carefully on bends or mountain roads, as it can lose the vehicle ahead and needs time to detect it again.

Do not use the system on slippery roads as it can create rapid changes in tyre traction (wheel spinning), so that you could lose control of the vehicle.

Do not use the adaptive cruise control during rain, snow or heavy dirt, as the radar sensor can be covered by a water film, dust, ice or snow. This reduces or suppresses completely the

visibility. In case of sensor blockage, clean the sensor cover.

Do not use the system when the spare wheel is in use.

System limits

9 Warning

The system's automatic brake force does not permit hard braking and the braking level may not be sufficient to avoid a collision.

After a sudden lane change, the system needs a certain time to detect the next preceding vehicle. So if a new vehicle is detected, the system may accelerate instead of braking.

The adaptive cruise control does ignore the oncoming traffic.

The adaptive cruise control does not consider pedestrians and animals for braking and driving off.

136 Driving and operating

The adaptive cruise control considers stopped vehicles only at low speed.

Do not use the adaptive cruise control when towing a trailer.

Do not use the adaptive cruise control on roads with an incline of more than 10%.

As the radar's field of detection is quite narrow, it is possible that the system may not detect: vehicles of reduced width, e.g.

motorcycles, scooters vehicles not running in the middle

of the lane vehicles entering a corner vehicles suddenly pulling out

Bends

The adaptive cruise control calculates a predicted path based on the centrifugal force. This predicted path considers the current bend characteristic, but cannot consider a future bend change. The system may lose the current vehicle ahead or consider a vehicle which is not in the actual lane. This can happen when entering or exiting a bend or if the bend gets stronger or weaker. If it no longer detects any vehicle ahead, then w will extinguish. If the centrifugal force is too high in a bend, the system slows down the vehicle slightly. This braking level is not designed to avoid spinning-off the bend. The driver is responsible for reducing the selected speed before entering a bend and in general to adapt the speed to the road type and to existing speed limits.

Motorways On motorways, adapt the set speed to the situation and the weather. Always consider that adaptive cruise control has a limited visibility range, a limited braking level and a certain reaction time to verify if a vehicle is on the driving path or not. Adaptive cruise control may not be able to brake the vehicle in time to avoid a collision with a much slower vehicle or after a lane change. This is particularly true while driving fast or if the visibility is reduced due to weather conditions. While entering or exiting a motorway, adaptive cruise control may lose the vehicle ahead and accelerate up to the set speed. For this reason, decrease the set speed before the exit or before the entry.

Vehicle path changes

Driving and operating 137

If another vehicle enters your driving path, adaptive cruise control will first consider the vehicle when it is completely in your path. Be ready to take action and depress the brake pedal if you need to brake more quickly.

Hill considerations

9 Warning

Do not use the adaptive cruise control on steep hill roads.

System performance on hills depends on vehicle speed, vehicle load, traffic conditions and the road gradient. It may not detect a vehicle in your path while driving on hills. On steep hills, you may have to use the accelerator pedal to maintain your vehicle speed.

When going downhill you may have to brake to maintain or reduce your speed. Note that applying the brake deactivates the system.

Radar unit

The radar unit is located in the middle of the front bumper.

9 Warning

The radar unit was aligned carefully during manufacture. Therefore, in the event of a front- end impact, do not use the system.

The front bumper may appear to be intact, however the sensor behind may be affected and react incorrectly. After an accident, consult a workshop to verify and adjust the radar unit position.

9 Warning

The usage of a license plate support on the front bumper may affect the proper radar unit functionality. When using a license plate support, follow the markings and indications on the front bumper.

Fault In the event of an adaptive cruise control fault, a warning light is illuminated in the instrument cluster and a warning message is displayed in the Driver Information Centre accompanied by an audible signal. The speed limit recognition may not operate correctly if traffic signs do not comply with the Vienna Convention on Road Signs and Signals.

138 Driving and operating

Have the system checked by a dealer or a qualified workshop. As a safety measure, do not use the system if the brake lights are faulty. Do not use the system if the front bumper is damaged.

Forward collision alert The forward collision alert may help to avoid or reduce the harm caused by front-end crashes.

The forward collision alert uses the front camera in the windscreen and depending on the vehicle

configuration a radar unit located behind the front bumper to detect a vehicle directly ahead, in the path. If a vehicle directly ahead is approached too quickly, a warning chime sounds and a message is displayed in the Driver Information Centre.

9 Warning

Forward collision alert is just a warning system and does not apply the brakes. When approaching a vehicle ahead too rapidly, it may not provide you enough time to avoid a collision. The driver accepts full responsibility for the appropriate following distance based on traffic, weather and visibility conditions. The complete attention of the driver is always required while driving. The driver must always be ready to take action and apply the brakes.

Activation The forward collision alert operates from 3 mph to vehicle's maximum speed.

Alerting the driver The driver is warned by following alerts: A warning message is displayed

in the Driver Information Center, when the distance to the vehicle ahead gets too small.

A warning message is displayed in the Driver Information Center and a warning chime sounds, when a collision is imminent and immediate driver's action is required.

In some cases, the system performs a short braking, when a collision is imminent and immediate driver's action is required.

Driving and operating 139

Selecting the alert sensitivity Three alert sensitivities can be selected in the settings of the active emergency braking within the vehicle personalisation 3 80. The chosen setting will be memorised when the ignition has been switched off. The alert timing will vary based on selected alert setting.

Deactivation The system can only be deactivated by deactivating the active emergency braking in the vehicle personalisation 3 80. When ignition is switched on next time, system is activated.

System limitations Forward collision alert is designed to warn on vehicles, pedestrians and cyclists, but may react also to other objects.

In the following cases, forward collision alert may not detect a vehicle ahead or sensor performance is limited: driving on winding or hilly roads driving during nighttime weather limits visibility, such as

fog, rain, or snow the sensor in the windscreen or

the radar unit behind the front bumper are blocked by snow, ice, slush, mud, dirt etc.

the windscreen is damaged or affected by foreign objects, e.g. stickers

the bumper is damaged or affected by foreign objects, e.g. license plate support

Active emergency braking Active emergency braking can help to reduce the damage and injury from crashes with vehicles and pedestrians directly ahead, when the driver does not actively take action either by manual braking or by steering. For vehicles equipped with

camera and radar, active emergency braking also detects cyclists. Before the active emergency braking applies, the driver is warned by the forward collision alert. Forward collision alert 3 138. Front pedestrian protection 3 142. Active emergency braking can be deactivated in the vehicle personalisation 3 80. If deactivated, m illuminates in the instrument cluster. When ignition is switched on next time, system is activated by default. The feature uses various inputs (e.g. camera sensor, radar sensor) to calculate the probability of a frontal collision.

9 Warning

This system is not intended to replace the driver responsibility for driving the vehicle and looking ahead. Its function is limited to

140 Driving and operating

supplemental use only to reduce the vehicle speed before a collision. The system may not react to animals. After a sudden lane change, the system needs a certain time to detect the next preceding vehicle. The driver must always be ready to take action and apply the brakes and steer to avoid collisions.

Functionality Depending on the vehicle configuration and the detected objects, there are several operational speed ranges. On vehicles equipped only with front camera, the active emergency braking operates from 3 mph to 50 mph when a vehicle has been detected. On vehicles equipped with radar sensor and front camera, the active emergency braking operates from 3 mph to 87 mph when a vehicle has been detected.

Active emergency braking only works when the seat belts of the front seats and depending on version of the rear seats are fastened. The system includes: brake preparation system emergency automatic braking smart brake assist forward collision alert front pedestrian protection

Brake preparation system When approaching a vehicle ahead or a pedestrian so quickly that a collision is likely, the brake preparation system slightly pressurises the brakes. This reduces the response time, when braking is requested.

Emergency automatic braking After activation of brake preparation system and just before the imminent collision, this function automatically applies braking to reduce the impact speed of the collision or prohibit a crash.

If active emergency braking is applied, m flashes in the instrument cluster. Emergency automatic braking is designed to react on vehicles or pedestrians ahead. If the vehicle is equipped with camera and radar, it also reacts on cyclists ahead. Forward collision alert 3 138. Front pedestrian protection 3 142. Below a speed of 19 mph, emergency automatic braking may slow down the vehicle to a complete stop. If the speed exceeds 19 mph, emergency automatic braking reduces the speed. However, the driver must apply the brake to come to a complete stop. Automatic transmission: If the

vehicle comes to a complete stop, automatic braking is maintained for a certain time. Keep the brake pedal depressed to prevent the vehicle from starting off again.

Manual transmission: If the vehicle comes to a complete stop, the engine may stall.

Driving and operating 141

Cruise control and adaptive cruise control will be deactivated when an emergency automatic braking occurs.

9 Warning

Do not rely on the system to brake the vehicle. Emergency automatic braking will not brake outside of its operating speed range and only responds to detected vehicles and pedestrians.

Smart brake assist If the driver brakes, but not sufficiently to avoid a collision, this system will supplement the braking. This assistance will only be provided if the driver presses the brake pedal. Smart brake assist will automatically disengage when the brake pedal is released. Forward collision alert 3 138. Front pedestrian protection 3 142.

System limitations In some cases, the active emergency braking system may provide an automatic braking in situations that seem to be unnecessary, for instance in parking garages, due to various types of objects, i.e., traffic signs or vehicles in another lane. Firmly apply the accelerator pedal to override the automatic braking if the situation and the surroundings permit. In the following cases, active emergency braking performance might be limited: driving on winding or hilly roads detecting vehicles with a trailer,

tractors, muddy vehicles, etc. detecting a vehicle when weather

limits visibility, such as in fog, rain, or snow

driving during nighttime the sensor in the windscreen or

the radar unit behind the front bumper is blocked by snow, ice, slush, mud, dirt or by foreign objects, e.g. stickers

the windscreen is damaged the bumper is damaged

Complete attention is always required while driving, and be ready to take action to avoid crashes. We recommend to deactivate the system in the vehicle personalisation in the following cases: when towing a trailer or caravan when carrying long objects on

roof bars or a roof rack when the vehicle is being towed

with the engine running when the vehicle is fitted with

snow chains when a spare wheel is fitted that

is smaller than the other wheels before using an automatic car

wash with the engine running before placing the vehicle on a

rolling road in a workshop if the windscreen has been

damaged close to the camera if the front bumper has been

damaged if the brake lights are not working

142 Driving and operating

Fault In case the system requires a service, a message is displayed in the Driver Information Centre. If the system does not work properly, vehicle messages are displayed in the Driver Information Centre. Vehicle messages 3 79.

Automatic post collision braking If an accident occurs, the automatic post collision braking is activated to reduce the risk of further collisions if the driver does not react. Automatic post collision braking acts on frontal, lateral and rear impact. It is possible to override the automatic braking by pressing the accelerator pedal or the brake pedal.

System limitations The system operates if airbags or seat belt pretensioners

have been deployed by the collision

braking system and electric functions remain operational after collision

driver has not depressed brake pedal or accelerator pedal

Fault If automatic post collision braking is not available, the control indicator J or d illuminates continuously, a corresponding message appears in the Driver Information Centre and a warning chime sounds. Have the cause of the fault remedied by a workshop.

Front pedestrian protection Front pedestrian protection may help to avoid or reduce the harm caused by front-end crashes with pedestrians when driving forward.

The system uses the front camera in the windscreen and depending on the vehicle configuration a radar unit in the front bumper to detect a pedestrian directly ahead in the path.

9 Warning

The usage of a license plate support on the front bumper may affect the proper radar unit functionality. When using a license plate support, follow the markings and indications on the front bumper.

Driving and operating 143

Front pedestrian protection can detect and alert to pedestrians in a forward gear at speeds between 3 mph and 50 mph. Additionally, it can automatically brake the vehicle. During nighttime driving, system performance is limited.

9 Danger

Front pedestrian braking does not provide an alert or automatically brake the vehicle, unless it detects a pedestrian. The system may not detect pedestrians, including children, when the pedestrian is not directly ahead, not fully visible, not standing upright, or when part of a group.

The system can only be deactivated by deactivating the active emergency braking in the vehicle personalisation 3 80. When ignition is switched on next time, system is activated.

Front pedestrian alert When approaching a detected pedestrian too quickly, a warning message is displayed in the Driver Information Centre. A warning chime is provided. Cruise control or adaptive cruise control may be disengaged when the front pedestrian alert occurs.

System limitations In the following cases, front pedestrian protection may not detect a pedestrian ahead or sensor performance is limited: driving on winding or hilly roads driving in the dark weather limits visibility, such as

fog, rain, or snow the sensor in the windscreen or

the radar unit behind the front bumper is blocked by snow, ice, slush, mud, dirt or by foreign objects, e.g. stickers

the windscreen is damaged the bumper is damaged

Parking assist General information When attaching a trailer or bicycle carrier to the trailer hitch, the parking assist is deactivated.

9 Warning

The driver bears full responsibility for the parking manoeuvre. Always check the surrounding area when driving backwards or forwards while using parking assist system.

Rear parking assist The system warns the driver with acoustic signals and display indication against potentially hazardous obstacles behind the vehicle while reverse gear is engaged.

144 Driving and operating

The system operates with ultrasonic parking sensors in the rear bumper.

Activation

The system is ready to operate when the LED in the parking assist button e is not illuminated. The state of the system is memorised when the ignition is switched off. Once activated, rear parking assist is ready to operate when reverse gear is engaged.

Indication Depending on which side of the vehicle is closer to an obstacle, you will hear acoustic warning signals in the vehicle on the respective side. The interval between the sounds becomes shorter as the vehicle gets closer to that obstacle. When the distance is less than approx. 30 cm, the sound is continuous.

Additionally, the distance to rear obstacles is displayed by changing distance lines in the Info Display 3 77. When the obstacle is very close, + for danger is displayed.

Driving and operating 145

Deactivation

The system is switched off when reverse gear is disengaged. Press e to deactivate the system manually. The LED in the button illuminates when the system is deactivated. If the system has been deactivated manually, it is not reactivated automatically the next time the ignition is switched on.

Front-rear parking assist The front-rear parking parking assist measures the distance between the vehicle and obstacles in front and

behind the vehicle. It informs and warns the driver by giving acoustic signals and display indication. It uses two different acoustic warning signals for the front and rear monitoring areas, each with a different tone frequency.

The system operates with ultrasonic parking sensors in the rear and front bumper.

Side protection This function warns the driver by display indication in the case of obstacles alongside the vehicle. If the obstacle is alongside the vehicle and within the driving path and might lead to a collision, an additional acoustic signal is given. Obstacles alongside the vehicle are only considered if they have been previously recognised by the parking sensors and memorised by the system.

9 Warning

Only fixed obstacles are indicated correctly. Moving obstacles detected at the beginning of a manoeuvre may be indicated mistakenly. Moving obstacles that appear alongside the vehicle and were not previously recognised by the parking sensors will not be indicated.

Objects memorised during the manoeuvre will only be considered during the current ignition cycle.

Activation The system is triggered when an obstacle is detected in front, behind or alongside the vehicle and the speed of the vehicle is below 6 mph.

146 Driving and operating

The system is ready to operate when the LED in the parking assist button e is not illuminated. The state of the system is memorised when the ignition is switched off.

Indication Depending on which side of the vehicle is closer to an obstacle in the driving path, you will hear acoustic warning signals in the vehicle on the respective side. The interval between the sounds becomes shorter as the vehicle gets closer to the obstacle in the driving path. When the distance is less than approx. 30 cm, the sound is continuous.

Additionally, the distance to rear, front and lateral obstacles is displayed by changing distance lines in the Info Display 3 77. If the vehicle stops for more than 3 seconds in a forward gear, if automatic transmission is in P position or if no further obstacles are detected, no acoustic warning signals are given.

Deactivation The system is deactivated automatically when vehicle speed exceeds 6 mph, by applying the electric parking brake or by pressing the parking assist button e.

When the system is deactivated manually, the LED in the button illuminates. If the system has been deactivated manually, it is not reactivated automatically the next time the ignition is switched on.

System limitations In the event of a fault or if the system does not work temporarily, e.g. because of high external noise level or other interference factors, C illuminates in the instrument cluster. A message is displayed in the Driver Information Centre and a warning chime sounds. Notice Make sure that the front number plate is properly mounted, vertically and horizontally centred and the sensors are firmly in place. The performance of the parking assist will be reduced if the license plate is bent or a license plate support is used.

Driving and operating 147

9 Warning

Under certain circumstances, various reflective surfaces on objects or clothing as well as external noise sources may cause the system to fail to detect obstacles. Special attention must be paid to low obstacles which can damage the lower part of the bumper.

Caution

Performance of the system can be reduced when sensors are covered, e.g. by ice or snow. Performance of the parking assist system can be reduced due to heavy loading. Special conditions apply if there are taller vehicles in the vicinity (e.g. off-road vehicles, mini vans, vans). Object identification and correct distance indication in the upper part of these vehicles cannot be guaranteed.

Objects with a very small reflection cross-section, e.g. objects of narrow size or soft materials, may not be detected by the system. Parking assist systems do not detect objects outside the detection range.

Advanced parking assist

9 Warning

The driver bears full responsibility for accepting the parking slot suggested by the system and the parking manoeuvre. Always check the surrounding area in all directions when using the advanced parking assist.

The advanced parking assist measures a suitable parking slot while passing, calculates the trajectory and automatically steers the vehicle while parking.

Advanced parking assist provides assistance for the following manoeuvres: entry into a parallel parking slot entry into a perpendicular parking

slot exit from a parallel parking slot

The driver must control acceleration, braking and gear shifting, while steering is done automatically. The driver can take control at any time by gripping the steering wheel. It may be necessary to move forwards and backwards more than once. Instructions are given in the Info Display 3 77. Instructions are only given in the case of entering a perpendicular parking slot. Advanced parking assist can only be activated when driving forwards.

148 Driving and operating

Advanced parking assist is always combined with front-rear parking assist. The system has six ultrasonic parking sensors each in both the rear and front bumper.

Entry into a parallel parking slot

Activation Slow down the vehicle speed below 19 mph.

Press S or activate the system via the Info Display. Info Display 3 77.

Select the parallel parking slot menu. S is illuminated in the instrument cluster to confirm the activation of the system. The allowed parallel distance between the vehicle and a row of parked cars is between 0.5 m and 1.5 m. The system will not identify slots that are clearly smaller than the vehicle.

When a free slot is detected, a visual feedback on the Info Display and a first acoustic signal are given. Drive slowly forwards. When the second acoustic signal is given, stop the vehicle, select reverse gear, release the steering wheel and start moving slowly. A visual feedback is given on the Info Display.

Driving and operating 149

Move forwards and backwards while observing the warnings of the parking assist until the end of manoeuvre is indicated.

Entry into a perpendicular parking slot

Activation Slow down the vehicle speed below 19 mph.

Press S or activate the system via the Info Display. Info Display 3 77.

Select the perpendicular parking slot menu. S is illuminated in the instrument cluster to confirm the activation of the system. The allowed parallel distance between the vehicle and a row of parked cars is between 0.5 m and 1.5 m. When several successive slots are found, the vehicle will be directed towards the last one. The system will not identify slots that are clearly smaller than the vehicle.

When a free slot is detected, a visual feedback on the Info Display and an acoustic signal are given. Stop the

150 Driving and operating

vehicle, select reverse gear, release the steering wheel and start moving without exceeding 4 mph.

Move forwards and backwards as instructed by observing the warnings of the parking assist and paying attention to the acoustic signals until the end of manoeuvre is indicated. During the parking manoeuvre, the system is automatically deactivated once the rear of the vehicle is within 50 cm of an obstacle.

Exiting a parallel parking slot

Activation

Press S or activate the system via the Info Display. Info Display 3 77.

Select the exit side in the menu. S is illuminated in the instrument cluster to confirm the activation of the system. Engage reverse or forward gear, release the steering wheel and start moving without exceeding 3 mph.

Driving and operating 151

Move forwards and backwards while observing the warnings of the parking assist until the end of manoeuvre is indicated. The manoeuvre is complete when the vehicle's front wheels are out of the parking slot. After deactivation check control over the vehicle.

Display indication The instructions on the display show: general hints and warning

messages the demand to stop the vehicle,

when a parking slot is detected

the direction of driving during the parking manoeuvre

the demand to shift into reverse or first gear

the demand to stop or to drive slowly

the successful completion of the parking manoeuvre indicated by a pop-up symbol and a chime

the cancelling of a parking manoeuvre

Deactivation The current park assist manoeuvre is cancelled via the button to return to the previous screen in the Info Display. To deactivate the system completely, press S in the centre console. The system is deactivated automatically: if the ignition is switched off if stalling the engine if no manoeuvre is started within

5 minutes of selection of the type of manoeuvre

after a prolonged stop of the vehicle during a manoeuvre

activating the turn light on the opposite side to that of the manoeuvre

if the electronic stability control is triggered

if the speed of the vehicle exceeds the stated limit

when the driver interrupts movement of the steering wheel

after ten manoeuvres to enter or exit a parallel parking slot or after seven manoeuvres to enter a perpendicular parking slot

by opening the driver's door if one of the front wheels

encounters an obstacle parking manoeuvre successfully

ended Deactivation by the driver or by the system during manoeuvring will be indicated on the display. Additionally, a chime sounds.

152 Driving and operating

The system is switched off automatically when towing an electrically connected trailer, bicycle carrier, etc. Contact your dealer to switch off the system for a prolonged period.

Fault In the event of a fault, a message is displayed in the Colour Info Display, accompanied by an acoustic signal. In the event of a fault in the power steering, C illuminates and a message is displayed in the Driver Information Centre.

9 Warning

Under certain circumstances, various reflective surfaces on objects or clothing as well as external noise sources may cause the system to fail to detect obstacles. Special attention must be paid to low obstacles which can damage the lower part of the bumper.

Caution

Performance of the system can be reduced when sensors are covered, e.g. by ice or snow. Performance of the parking assist system can be reduced due to heavy loading. Special conditions apply if there are taller vehicles in the vicinity (e.g. off-road vehicles, mini vans, vans). Object identification and correct distance indication in the upper part of these vehicles cannot be guaranteed. Objects with a very small reflection cross-section, e.g. objects of narrow size or soft materials, may not be detected by the system. Parking assist systems do not detect objects outside the detection range.

Notice It is possible that the sensor detects a non-existing object caused by echo disturbance from external

acoustic noise or mechanical misalignments (sporadic false warnings may occur). Make sure that the front number plate is properly mounted (not bent and no gaps to the bumper on the left or right side) and the sensors are firmly in place. Advanced parking assist system may not respond to changes in the available parking space after initiating a parking manoeuvre. The system may recognize an entry, a gateway, a courtyard or even a crossing as a parking slot. After selecting reverse gear the system will start a parking manoeuvre. Take care regarding the availability of the suggested parking slot. Surface irregularities, e.g. on construction zones, are not detected by the system. The driver accepts responsibility.

Driving and operating 153

Side blind spot alert Side blind spot alert assist helps to avoid crashes due to unintentional lane departures when an object is detected within a specified blind spot zone. The system displays a visual alert in each exterior mirror, when detecting objects that may not be visible in the interior and exterior mirrors. Side blind spot alert uses some of the advanced parking assist sensors which are located in the front and rear bumper on both sides of the vehicle.

9 Warning

Side blind spot alert is only a lane changing aid and does not replace driver vision. Side blind spot alert does not detect:

Vehicles outside the side blind zones which may be rapidly approaching.

Pedestrians or animals.

Non-moving objects, e.g. stationary vehicles, street lights, road signs, etc.

Failure to use proper care when changing lanes may result in damage to the vehicle, injury, or death. Always check the outside and rearview mirrors, glance over your shoulder, and use the turn signal before changing lanes.

Activation The system can be activated via the vehicle settings menu in the Info Display. Info Display 3 77.

Functionality

When the system detects a vehicle in the side blind zone while driving forwards, an LED will illuminate in the relevant exterior mirror. If the turn lights of the relevant side are activated, the LED will flash. The LED comes on immediately when your vehicle is being passed. The LED comes on after a delay when your vehicle is passing another vehicle slowly.

154 Driving and operating

Operation conditions The following conditions must be fulfilled for proper operation: all vehicles are moving in the

same direction and in adjacent lanes

the speed of your vehicle is between 7 or 20 and 87 mph

passing a vehicle with a speed difference of less than 6 mph

another vehicle is passing with a speed difference of less than 15 mph

the traffic flow is normal driving on a straight or slightly

curved road the vehicle is not pulling a trailer the sensors are not covered by

mud, ice or snow the warning zones in the door

mirrors or the detection zones on front and rear bumper ar not covered with adhesive labels or other objects

No alert will be given in the following situations: in the presence of non-moving

objects, e.g. parked vehicles, barriers, street lamps, road signs

in very dense traffic, when moving vehicles might be confused with a stationary object

with vehicles moving in the opposite direction

driving on a winding road or a sharp corner

when passing or being passed by a very long vehicle, e.g. lorry, coach, which is at the same time detected at the rear in the blind spot angle and present in the driver's forward field of vision

when passing too quickly

Deactivation The system can be activated via the vehicle settings menu in the Info Display. Info Display 3 77. The state of the system is memorised when switching off the ignition.

The system is automatically deactivated when towing an electrically connected trailer. Due to adverse weather conditions, such as heavy rain, false detections may occur.

Fault In the event of a fault, C illuminates in the instrument panel, accompanied a display message. Contact a dealer or a qualified workshop to have the system checked.

Rear view camera The rear view camera assists the driver when reversing by displaying a view of the area behind the vehicle. It allows views of the vehicle's surroundings to be displayed as a nearly 180 picture in the Info Display, like a bird's eye view.

9 Warning

The rear view camera does not replace driver vision. Note that objects that are outside the

Driving and operating 155

camera's field of view and the parking assist sensors, e.g. below the bumper or underneath the vehicle, are not displayed. Do not reverse or park the vehicle using only the rear view camera. Always check the surrounding of the vehicle before driving.

The system uses:

rear view camera, mounted in the rear bumper above the number plate

ultrasonic parking sensors in the rear bumper

The screen in the Info display is divided into two parts. On the right there is a view from above the vehicle, and on the left there is the view from the rear displayed. The parking sensors complete the information on the view from above the vehicle. The area displayed by the rear view camera is limited. The distance of the image that appears on the display differs from the actual distance.

Activation Rear view camera is activated when reverse gear is engaged.

Functionality Different views can be selected in the left part of the display. Change the type of view at any time during a manoeuvre by pressing the touch field in the left lower zone of the display and selecting a view from the view selection menu: Standard view Auto mode Zoom view 180 view

The display is immediately updated with the type of view selected. Auto mode is activated by default. In this mode, the system selects the best view, standard or zoom, to display according to the information from the parking sensors. The state of the system is not kept in memory when the ignition is switched off. The area displayed by the rear view camera is limited. The distance of the image that appears on the display differs from the actual distance.

156 Driving and operating

Standard view

The area behind the vehicle is displayed in the screen. The vertical lines represent the width of the vehicle with mirrors unfolded. The direction of the lines changes with the position of the steering wheel. The first horizontal line represents a distance of about 30 cm beyond the edge of vehicle's rear bumper. The upper horizontal lines represent distances of about 1 m and 2 m. This view is available in auto mode or in the view selection menu.

Trajectory lane of the vehicle is shown in accordance with the steering angle.

Auto mode This mode is activated by default. Using sensors in the rear or in the front bumper, the automatic view changes from rear view or front view to a view from above, as an obstacle is approached during a manoeuvre.

Zoom view

The rear view camera records the vehicle's surroundings during the manoeuvre in order to reconstruct a view from above the rear or the front

of the vehicle in its near surroundings.Thus, the vehicle can be manoeuvred around obstacles nearby. This view is available with auto mode or in the view selection menu.

180 view

The 180 view facilitates reversing out of a parking bay, making it possible to see the approach of vehicles, pedestrians and cyclists. This view is not recommended for carrying out a complete manoeuvre. It is made up of three areas: left 1,

Driving and operating 157

centre 2 and right 3. This view is available from the view selection menu only.

Deactivation The rear view camera is deactivated when: towing an electrically connected

trailer, bicycle carrier, etc. a certain forward speed is

exceeded or if reverse gear is not engaged for 7 seconds

by pressing the icon q in the left upper corner of the touch screen

System limitations

Caution

For optimal operation of the system, it is important to keep the lense of the camera, which is located in the bumper between the number plate lights, always clean. Rinse the lenses with water and wipe with a soft cloth.

Do not clean the lenses with a steam-jet or high-pressure jet cleaner.

The rear view camera may not operate properly when: surrounding is dark sun or beam of headlights is

shining directly into camera lenses

weather limits visibility, such as fog, rain, or snow

camera lenses blocked by snow, ice, slush, mud, dirt. Clean the lense, rinse with water, and wipe with a soft cloth

vehicle is towing an electrically connected trailer, bicycle carrier, etc.

vehicle had a rear end accident extreme temperature changes

Traffic sign assistant Speed limit Using the camera at the top of the windscreen, this system detects and reads speed limit signs and end of speed limit signs. Up to two speed limit signs including supplementary signs are displayed in the Driver Information Centre. If several speed limits are recognised, the vehicle may analyse and display the valid speed limit. When a traffic sign for a cetrain area, e.g. city or motorway, is recognised, the corresponding speed limit will also be displayed. This system can be activated or deactivated in the vehicle personalisation 3 80. Speed limiter 3 129. Cruise control 3 127. Adaptive cruise control 3 131.

158 Driving and operating

Other traffic signs The system recognises traffic signs and displays them in the Driver Information Centre.

9 Warning

The actual traffic sign always takes priority over the traffic sign displayed in the Driver Information Centre.

This system can be activated or deactivated in the vehicle personalisation 3 80. Driver Information Centre 3 76.

Lane keep assist Lane keep assist supports the driver to avoid unintended leaving of the lane. The front camera observes road

edges, as well as the lane markings between which the vehicle is driving. If the vehicle approaches a road edge or a lane marking, the steering wheel is gently turned to position so that the vehicle turns back into the lane. The driver will then notice a turning movement of the steering wheel. Turn steering wheel in same direction, if the system does not steer sufficiently. Turn steering wheel gently into opposite direction, if lane change is intended. When the system steers to correct the trajectory of the vehicle, L flashes yellow in the instrument cluster. Unintended lane departure is not assumed by the system when the turn lights are operated and during few seconds after turn lights have been switched off. If the system detects that the steering wheel is not held permanently, it interrupts the correction. A warning message in the Driver Information Centre accompanied by a warning chime alerts when immediate drivers action is required.

Notice The system may be switched off if it detects lanes which are too narrow, too wide or too curved.

Following preconditions have to be fulfilled: vehicle speed must be between

40 mph and 112 mph the driver must hold the steering

wheel the turn lights are not activated the electronic stability control is

activated and not in operation the vehicle is not connected to a

trailer or a bicycle carrier normal driving behaviour (system

detects dynamic driving style, i.e. pressure on the brake or accelerator pedal)

roads with good lane markings no spare wheel is used the vehicle is not driven in a tight

corner

Driving and operating 159

Activation

If the system is activated, the LED in the button j is not illuminated. To activate the system when the system is deactivated, press j.

Deactivation To deactivate the system, press j. Deactivation of the system is confirmed by the illuminated LED in the button.

Fault In the event of a fault, L and C appear in the instrument panel, accompanied by a display message and a warning chime. Seek the assistance of a workshop.

System limitations The system performance may be affected by: a dirty or foggy windscreen or if

the windscreen is affected by foreign objects, e.g. stickers

close vehicles ahead banked roads winding or hilly roads road edges sudden lighting changes adverse environmental

conditions, e.g. heavy rain or snow

vehicle modifications, e.g. tyres

Switch off the system if the system is disturbed by tar marks, shadows, road cracks, temporary or construction lane markings, or other road imperfections.

9 Warning

Always keep your attention on the road and maintain proper vehicle position within the lane, otherwise vehicle damage, injury or death could occur. Lane keep assist does not continuously steer the vehicle. The system may not keep the vehicle in the lane or give an alert, even if a lane marking is detected. The steering of the lane keep assist may not be sufficient to avoid a lane departure. The system may not detect hands- off driving due to external influences like road condition and surface and weather. The driver has full responsibility to control the

160 Driving and operating

vehicle and is always required to keep the hands on the steering wheel while driving. Using the system while towing a trailer or on slippery roads could cause loss of control of the vehicle and a crash. Switch the system off.

Advanced lane keep assist

9 Warning

The system assists the driver in managing the steering, acceleration and braking within the limits of the laws of physics and the capabilities of the vehicle. Some road infrastructure elements or vehicles present on the road may not be properly seen or may be poorly interpreted by the camera and radar, which may lead to an unexpected change in direction, a lack of steering correction and/or inappropriate management of the acceleration or braking.

Advanced lane keep assist is an enhancement of the lane keep assist system.

The activated system observes the lane markings by using the camera located at the top of the windscreen. It steers the vehicle inside the detected lane. The driver will notice a turning movement of the steering wheel.

Thus, the current position of the vehicle within the lane is kept. This position is not necessarily the centre of the lane. In the case that the vehicle is driving at the outer edge of the lane, the system corrects the trajectory smoothly towards the centre of the currently driven lane when a determined speed has been exceeded. Again, the driver will notice a turning movement of the steering wheel. When the vehicle is steered by the system, O illuminates green in the instrument cluster. However, the control of the vehicle can be taken over at any time by the driver. Therefore, the driver needs to apply some additional force when turning the steering wheel. If the system detects that the driver is not holding the wheel firmly enough, it triggers a series of gradual alerts. If the interruption takes too long, the system will be deactivated. O extinguishes in the instrument cluster. The system has to be reactivated again by the driver.

Driving and operating 161

Advanced lane keep assist operates only in combination with adaptive cruise control. Adaptive cruise control 3 131.

Required preconditions Adaptive cruise control must be

activated. The driver must hold the steering

wheel. The turn lights are not activated. The Electronic Stability Control is

activated and not in operation. The vehicle is not connected to a

trailer or a bicycle carrier. Normal driving behaviour is

required (system detects dynamic driving style, i.e. pressure on the brake or accelerator pedal).

Roads with good lane markings are required.

No spare wheel is used. The vehicle is not driven in a tight

corner.

Activation

Press C to activate the system. The LED in the button is illuminated and O illuminates green in the instrument cluster if lane marking are detected. The system is active now.

Deactivation To deactivate the system, press C. The LED in the button and O in the instrument panel are extinguished to confirm the deactivation of the system.

Pausing / suspending the system Advanced lane keep assist may be paused or suspended in the following situations: The Electronic Stability Control is

in operation or it has been deactivated.

At least one of the lane markings is not detected by the system for several seconds. The system will be reactivated once the operating conditions are regained.

The turn lights are activated. Driving outside the lane limits. The steering wheel is held too

tight or moved too dynamically. The brake pedal or the

accelerator pedal are applied. The adaptive cruise control is

paused. The road is too narrow or wide. The lateral acceleration in curves

is too high

162 Driving and operating

Fault In the event of a fault, O and C appear in the instrument panel, accompanied by a display message and a warning chime. Seek the assistance of a workshop.

System limitations The system performance may be affected by: a dirty or foggy windscreen or if

the windscreen is affected by foreign objects, e.g. stickers

close vehicles ahead banked roads winding or hilly roads road edges sudden lighting changes adverse environmental

conditions, e.g. heavy rain or snow

vehicle modifications, e.g. tyres load condition of the vehicle, i.e.,

whether the vehicle heavily or lightly loaded

A warning message may appear when the vehicle is travelling in a long straight lane on a smooth road surface even if the driver is holding the steering wheel properly. Deactivate the system if the system is disturbed by tar marks, shadows, road cracks, temporary or construction lane markings, or other road imperfections.

9 Warning

Always keep your attention on the road and maintain proper vehicle position within the lane, otherwise vehicle damage, injury or death could occur. The system may not keep the vehicle in the lane or give an alert, even if a lane marking is detected. The steering of the advanced lane keep assist may not be sufficient to avoid a lane departure. The system may not detect hands- off driving due to external influences (road condition and surface, weather etc). The driver

has full responsibility to control the vehicle and is always required to keep the hands on the steering wheel while driving. Using the system while towing a trailer or on slippery roads could cause loss of control of the vehicle and a crash. Switch the system off.

Driver alert The driver alert system monitores the driving time and the vigilance of the driver. Monitoring the vigilance of the driver is based on the trajectory variations of the vehicle compared to the lane markings. The system cannot replace the need for vigilance on the part of the driver. Taking a break is recommended as soon as feeling tired or at least every 2 hours. Do not drive when feeling tired.

Activation or Deactivation The system can be activated or deactivated in the vehicle personalisation 3 80.

Driving and operating 163

The system is automatically activated when ignition is switched on.

Driving time alert The driver gets notified by a pop-up reminder symbol in the Driver Information Centre simultaneously with an acoustic alert if the driver has not taken a break after 2 hours of driving at a speed above 40 mph. The alert is repeated hourly until the vehicle is stopped, no matter how vehicle speed evolves. The counting of driving time alert is reset when the ignition has been switched off for a few minutes.

Driver drowsiness detection The system monitors the driver's level of vigilance at speeds above 40 mph. A camera at the top of the windscreen detects variations in trajectory compared to the lane markings. If the trajectory of the vehicle suggests a certain level of drowsiness or inattention by the driver, the system triggers the first

level of alert. The driver is notified by a message and an audible signal is given. After three first level alerts, the system triggers a new alert with a message, accompanied by a more pronounced audible signal. In certain driving conditions such as poor road surface or strong winds etc., the system may give alerts independent of the driver's level of vigilance. The driver drowsiness detection is reinitialised when the ignition has been switched off for a few minutes or the speed remains below 40 mph for a few minutes.

System limitations In the following situations, the system may not operate properly or even not operate at all: poor visibility caused by

inadequate lighting of the roadway, falling snow, heavy rain, dense fog etc.

dazzle caused by headlamps of oncoming vehicles, low sun, reflections on damp roads, leaving a tunnel, alternating shade and light etc.

windscreen area in front of the camera covered by dirt, snow, stickers etc.

no lane markings detected or multiple lane markings due to roadworks

close vehicles ahead winding roads or narrow roads

164 Driving and operating

Charging General information

9 Warning

Persons with a pacemaker should consult a doctor for possible precautions.

Charging the vehicle's high voltage battery depends upon several factors:

high voltage battery of the vehicle internal onboard charger (OBC) external charging device charging cable

The charging cable connects the vehicle's high voltage battery with an external charging device providing electric power. This may be a

domestic electrical outlet, a Green'Up socket, a wall box or a public charging station. The high voltage battery can be charged with direct current (DC) only. When charging from a domestic electrical outlet, a wall box or an alternating current (AC) charging station, AC has to be converted into DC. This is done by the vehicle's onboard charger. The onboard charger is available with 7.4 kW (single-phase) and 11 kW (3-phase). If the vehicle is charged at a public DC charging station, no DC conversion is required. The high voltage battery can be directly charged with DC provided by the DC charging station. The speed of charging the vehicle's high voltage battery depends upon the weakest element of the charging chain. To achieve the maximum charging speed, charging cable and charging device have to be attuned to each other. Notice Make sure that the charging cable used fits to the vehicle's onboard charger.

Charging types 3 164. Charging cable 3 172.

Charging types There are different types of charging the vehicle's high voltage battery.

Charging at wallboxes

A wallbox is a charging unit for private households. It provides a charging cable which has to be connected to the vehicle's charging port. Some wallboxes do not provide a charging cable. In this case, a separate charging cable is required which has to be connected to both the wallbox and the charging port of the vehicle. Charging time may take approx. 5 hours with a charging power of 11 kW and 15 hours with a charging power of 3.7 kW.

Driving and operating 165

Charging at charging stations Charging stations may provide alternating current (AC) or direct current (DC). Charging time may vary depending on the charging station, DC charging stations provide the fastest charging. To charge the vehicle's battery, the charging cable of the charging station has to be connected to the charging port of the vehicle.

AC charging station: Charging time may take approx. 5 hours with a charging power of 11 kW and 7.5 hours with a charging power of 7.4 kW.

DC charging station: Up to approx. 80% of battery capacity may be charged in approx. 30 minutes at a charging power of 100 kW.

Charging at domestic electrical outlets

The vehicle's high voltage battery can be charged at a domestic electrical outlet. Connect the charging cable to the vehicle's charging port and to the domestic electrical outlet. Charging time may take approx. 30 hours with a charging power of 1.8 kW.

Charging cable Depending on the charging type, different charging cables are used.

9 Warning

Improper use of portable charging cables may cause a fire, electrical shock, or burns, and may result in damage to property, serious injury, or death.

Do not use extension cables, multi-outlet power strips, splitters, grounding adaptors, surge protectors, or similar devices.

Do not use an electrical socket that is worn or damaged, or one that will not hold the plug firmly in place.

Do not immerse the charging cable into any liquid.

Do not use an electrical socket that is not properly grounded.

Do not use an electrical socket that is on a circuit with other electrical loads.

166 Driving and operating

9 Warning

Read all the safety warnings and instructions before using this product. Failure to follow the warnings and the instructions may result in electric shock, fire, and / or serious injury. Never leave children unattended near the vehicle while the vehicle is charging and never allow children to play with the charging cable. If the plug provided does not fit the electrical outlet, do not modify the plug. Arrange for a qualified electrician to inspect the electrical outlet. Do not put fingers into the electric vehicle connector.

9 Danger

There is a risk of electric shock that may cause personal injury or death.

Do not use the charging cable if any part of the charging cable is damaged. Do not open or remove the charging cable cover. Service by qualified personnel only. Connect the charging cable to a properly grounded outlet with cables that are not damaged.

Basic domestic cable (mode 2) / enhanced domestic cable (mode 2)

1. Vehicle plug 2. Status indicators 3. Wall plug

Basic domestic cables (mode 2) are used for charging at domestic electrical outlets. A basic domestic cable (mode 2) consists of a vehicle plug, a control box and a plug for the domestic electrical outlet. The control box has an intergrated charge controller and several LEDs indicating the charging status. Enhanced domestic cables (mode 2) are similar to basic domestic cables (mode 2). However, the charging performance of enhanced domestic cables (mode 2 charging) is better than the charging performance of basic domestic cables (mode 2). Enhanced domestic cables (mode 2) are used at Green'Up sockets which have to be installed by a certified electrician at the customer's site.

Charging cable status indicators After plugging in the charging cable, it will perform a quick self test and all status indicators illuminate for a

Driving and operating 167

moment. For the functions of the status indicators, refer to the manual of the charging cable manufacturer.

Important information about portable electric vehicle charging Charging an electric vehicle can

stress a building's electrical system more than a typical household appliance.

Before you plug in to any electrical outlet, have a qualified electrician inspect and verify the electrical system (electrical outlet, wiring, junctions and protection devices) for heavy- duty service at a 10 A continuous load.

Electrical outlets may wear out with normal usage or be damaged over time, making them unsuitable for electric vehicle charging.

Check the electrical outlet / plug while charging and discontinue use if the electrical outlet / plug is hot, then have the electrical outlet serviced by a qualified electrician.

When outdoors, plug into an electrical outlet that is weather- proof while in use.

Mount the charging cable to reduce strain on the electrical outlet / plug.

Mode 3 charging cable

1. Vehicle plug 2. Plug for wall box / AC charging

station Mode 3 charging cables are used for charging at wall boxes and AC charging stations. A mode 3 charging cable provides a vehicle plug and a plug for the wall box / AC charging

station. Wall boxes / AC charging stations may provide an integrated mode 3 charging cable. For more information on the mode 3 charging cable, refer to the manual of the charging cable manufacturer.

Mode 4 charging cable Notice Only use DC charging cables shorter than 30 metres.

Mode 4 charging cables are used for DC charging. Since mode 4 charging cables are integrated within DC charging stations, they only provide a vehicle plug.

Charging This section describes the steps for charging an electric vehicle. The steps differ depending on the respective charging type. In order to ensure the compatibility of plug and outlet, different labels are used. The labels are located on the inside of the vehicle's charging port flap. Make sure to connect only a cable of the same type.

168 Driving and operating

Type 2 plug or outlet used for AC charging

FF plug or outlet used for DC charging

Charging at wall boxes 1. Shift into P and switch off the

vehicle.

2. Push the charging port flap to release it.

3. Take the mode 3 charging cable out of the load compartment.

4. Plug in the wall box plug of the mode 3 charging cable into the corresponding port of the wall box.

5. Plug in the vehicle plug of the mode 3 charging cable into the charging port of the vehicle. Charging status 3 172.

Driving and operating 169

The start of charging is indicated by the green flashing of the status indicator at the charging port.

Once charging, the vehicle plug will be locked to the charging port and cannot be disconnected while charging is active. - indicator illuminates. Charging types 3 164.

Charging at public AC charging stations / public DC charging stations When charging at a public AC charging station / public DC charging station, follow the instructions for the

use of the respective charging station. Public AC charging stations may not provide an integrated charging cable. In this case, a portable mode 3 charging cable is required. Charging types 3 164.

Charging at domestic electrical outlets / Green'Up sockets

9 Warning

Only use a domestic electrical outlet which is properly grounded and protected by a 30 mA differential switch. Only use a domestic electrical outlet protected by a circuit breaker adapted to the amperage of the electrical circuit. Have a qualified electrician check the electrical installation to be used. The installation has to be in compliance with national standards and compatible with the vehicle.

When using a dedicated domestic electrical outlet, have it installed by a qualified electrician. Make sure that the electrical outlet, the plug and the cable do not support the weight of the control box.

A charging cable used to charge the vehicle's high voltage battery is stored under the rear floor storage cover in the load compartment. 1. Shift into P and switch off the

vehicle.

2. Push the charging port flap to release it.

170 Driving and operating

3. Take the charging cable out of the load compartment.

4. Plug the charging cable into the domestic electrical outlet / Green'Up socket. Verify the charging cable status. Charging cable 3 172.

5. Plug in the vehicle plug of the charging cable into the charging port of the vehicle. Charging status 3 171.

The start of charging is indicated by the green flashing of the status indicator at the charging port and at the control box of the charging cable.

Once charging, the vehicle plug will be locked to the charging port and cannot be disconnected while charging is active. - indicator illuminates.

Cancelling the charging process Notice At public charging stations, the cancelling and subsequent resuming of the charging process may cause additional costs. Once the charging process has started, only the driver's door can be unlocked without cancelling the charging process. Therefore, activate the driver's door only function in the vehicle personalisation.

Press < on the remote control to cancel the charging process at any time. Press < twice to to cancel the charging process at any time if the driver's only function is activated. Central locking system 3 9. Vehicle personalisation 3 80.

Driving and operating 171

Stop charging

9 Warning

After the end of the charging progress:

Disconnect the charging cable from the charging port of the vehicle.

Make sure the charging port flap is closed.

Always disconnect the charging cable from the domestic electrical outlet.

Avoid any entry of fluids into the charging port of the vehicle, the vehicle plug of the charging cable and the domestic electrical outlet.

The high voltage battery is fully charged if the status indicator on the charging port permanently illuminates green. 1. Unlock the vehicle before

removing the vehicle plug from the charging port.

If the vehicle is already unlocked, lock the vehicle and unlock it again.

2. Disconnect the vehicle plug of the charging cable from the charging port within 30 seconds after unlocking.

3. Close the charging port flap by pressing firmly in the centre to latch properly.

4. If charging at a wall box / public AC charging station, disconnect the charging cable from the wall box / public AC charging station. If charging at a domestic electrical outlet / Green'Up socket,

disconnect the charging cable from the domestic electrical outlet / Green'Up socket.

While the charging cable is plugged into the vehicle, the vehicle cannot be driven.

Programmable charging By default, charging starts as soon as the charging cable is connected to the charging port of the vehicle. It is also possible to schedule charging using the Info Display. Programmable charging is only possible when charging at a domestic electrical outlet / Green'Up socket or a wall box. Programmable charging is also available via the MyVauxhall App. Notice On vehicles equipped with the Multimedia infotainment system, programmable charging can only be used via the MyVauxhall App.

172 Driving and operating

1. Press m. 2. Select Charge.

3. Press /.

4. Define the number of hours and minutes after which the loading process starts.

5. Press OK. 6. Plug in the vehicle.

7. Within 1 minute, press b to activate programmable charging.

The status indicator illuminates blue indicating that programmable charging is active. Charging 3 167. Charging status 3 172.

Charging status

If the vehicle is plugged in and the ignition is switched off, the charging status indicator indicates the following: Illuminates white: welcome

lighting when charging port flap is opened

Illuminates green: charging complete

Flashes green: charging in process

Illuminates red: charging fault Illuminates blue: programmable

charging active

Driving and operating 173

A charging fault has occured if the vehicle is plugged in and the charging status indicator is off. Further charging status indicators are located on the control box of the basic domestic cable (mode 2) / enhanced domestic cable (mode 2). Charging cable 3 165. Programmable charging 3 171.

Fuel Fuel for petrol engines

Only use unleaded fuel that complies with European standard EN 228 or E DIN 51626-1 or equivalent. The engine is capable of running with fuel that contains up to 10% ethanol (e.g. named E10). Use fuel with the recommended octane rating. A lower octane rating can reduce engine power and torque and slightly increases fuel consumption.

Caution

Do not use fuel or fuel additives that contain metallic compounds such as manganese-based additives. This may cause engine damage.

Caution

Use of fuel with a lower octane rating than the lowest possible rating could lead to uncontrolled combustion and engine damage.

The engine specific requirements regarding octane rating are given in the engine data overview 3 224. A country-specific label at the fuel filler flap can supersede the requirement. In certain countries, the use of a particular fuel, e.g. a specific octane rating, may be required to ensure proper engine operation.

174 Driving and operating

Fuel for diesel engines The Diesel engines are compatible with bio-fuels that conform to current and future European standards and and can be obtained from filling stations:

Diesel fuel that meets standard EN590 mixed with a biofuel that meets standard EN14214 (possibly containing up to 7% Fatty Acid Methyl Ester).

Diesel fuel that meets standard EN16734 mixed with a biofuel that meets standard EN14214 (possibly containing up to 10% Fatty Acid Methyl Ester).

Paraffinic Diesel fuel that meets standard EN15940 mixed with a biofuel that meets standard EN14214 (possibly containing up to 7% Fatty Acid Methyl Ester).

The use of B20 or B30 fuel meeting standard EN16709 is possible in your Diesel engines. However, this use, even occasional, requires strict

application of the special servicing conditions referred to as "Arduous conditions". For more information, contact a dealer or a qualified workshop.

Caution

The use of any other type of (bio) fuel (vegetable or animal oils, pure or diluted, domestic fuel etc.) is strictly prohibited (risk of damage to the engine and fuel system).

Notice The only Diesel additives authorised for use are those that meet the B715000 standard.

Low temperature operation At temperatures below 0 C, some diesel products with biodiesel blends may clog, freeze or gel, which may affect the fuel supply system. Starting and engine operation may not work properly. Make sure to fill winter grade diesel fuel at ambient temperatures below 0 C.

Driving and operating 175

Arctic grade diesel fuel can be used at extremely low temperatures below -20 C. Using this fuel grade in warm or hot climates is not recommended and may cause engine stalling, poor starting or damage on the fuel injection system.

Refuelling

9 Danger

Before refuelling, switch off ignition and any external heaters with combustion chambers. Follow the operating and safety instructions of the filling station when refuelling.

9 Danger

Fuel is flammable and explosive. No smoking. No naked flames or sparks. If you can smell fuel in your vehicle, have the cause of this remedied immediately by a workshop.

A label with symbols at the fuel filler flap is indicating the allowed fuel types. In Europe the pump nozzles of the filling stations are marked with these symbols. Refuel only the allowed fuel type.

Caution

In case of misfuelling, do not switch on ignition.

Fuel filler flap is located at left rear side of vehicle.

The fuel filler flap can only be opened if the vehicle is unlocked. Release the fuel filler flap by pushing the flap.

Petrol and diesel refuelling To open, turn the cap slowly anticlockwise.

The fuel filler cap can be attached to the hook on the fuel filler flap. Place the nozzle in straight position to the filler neck and press with slight force to insert. To refuel, switch on pump nozzle. After the automatic cut-off, the tank can be topped up by operating the pump nozzle a maximum of two more times.

176 Driving and operating

Caution

Wipe off any overflowing fuel immediately.

To close, turn the fuel filler cap clockwise until it clicks. Close the flap and allow it to engage.

Fuel filler cap Only use genuine fuel filler caps. Diesel-engined vehicles have special fuel filler caps.

Trailer hitch General information

Caution

For new vehicles, only tow a trailer after having driven at least 620 miles.

Only use towing equipment that has been approved for your vehicle. Entrust retrofitting of towing equipment to a workshop. It may be necessary to make changes that affect the cooling system, heat shields or other equipment. Trailers equipped with LED lights are not suitable for the wiring harness of this trailer hitch. Fitting of towing equipment could cover the opening of the towing eye. If this is the case, use the coupling ball bar for towing. Always keep the coupling ball bar in the vehicle to have it on hand if needed.

Driving characteristics and towing tips Before attaching a trailer, lubricate the coupling ball. However, do not do so if a stabiliser, which acts on the coupling ball, is being used to reduce snaking movements. During trailer towing do not exceed a speed of 50 mph. A maximum speed of 60 mph is only appropriate if an oscillation damper is used and the permissible gross trailer weight does not exceed the vehicles curb weight. For trailers with low driving stability and caravan trailers, the use of an oscillation damper is strongly recommended. If the trailer starts snaking, drive more slowly, do not attempt to correct the steering and brake sharply if necessary. When driving downhill, drive in the same gear as if driving uphill and drive at a similar speed. Adjust tyre pressure to the value specified for full load 3 226.

Driving and operating 177

Trailer towing Trailer loads The permissible trailer loads are vehicle and engine-dependent maximum values which must not be exceeded. The actual trailer load is the difference between the actual gross weight of the trailer and the actual coupling socket load with the trailer coupled. The permissible trailer loads are specified in the vehicle documents. In general, they are valid for gradients up to 12%. The permissible trailer load applies up to the specified incline and at sea level. Since engine power decreases as altitude increases due to the air becoming thinner, therefore reducing climbing ability, the permissible gross train weight also decreases by 10% for every 1000 m of altitude. The gross train weight does not have to be reduced when driving on roads with slight inclines (less than 8%, e.g. motorways).

The permissible gross train weight must not be exceeded. This weight is specified on the identification plate 3 220.

Vertical coupling load The vertical coupling load is the load exerted by the trailer on the coupling ball. It can be varied by changing the weight distribution when loading the trailer. The maximum permissible vertical coupling load (55 kg) is specified on the towing equipment identification plate and in the vehicle documents. Always aim for the maximum vertical coupling load, especially in the case of heavy trailers. The vertical coupling load should never fall below 25 kg.

Rear axle load When the trailer is coupled and the towing vehicle fully loaded, the permissible rear axle load (see identification plate or vehicle documents) may be exceeded by 60 kg, the gross vehicle weight rating must not be exceeded. If the permissible rear axle load is exceeded, a maximum speed of 60 mph applies.

178 Vehicle care

Vehicle care

General Information ................... 178 Accessories and vehicle modifications .......................... 178

Vehicle storage ........................ 179 End-of-life vehicle recovery ..... 180

Vehicle checks ........................... 180 Performing work ...................... 180 Bonnet ..................................... 181 Engine oil ................................. 182 Engine coolant ......................... 183 Washer fluid ............................ 184 Brakes ..................................... 184 Brake fluid ............................... 184 Vehicle battery ......................... 185 Diesel fuel system bleeding ..... 187 Wiper blade replacement ........ 187

Bulb replacement ....................... 188 LED headlights ........................ 188 Front fog lights ......................... 188 Tail lights ................................. 188 Number plate light ................... 189 Interior lights ............................ 189

Electrical system ........................ 189 Fuses ....................................... 189

Engine compartment fuse box . 190 Instrument panel fuse box ....... 192

Vehicle tools .............................. 195 Tools ........................................ 195

Wheels and tyres ....................... 196 Winter tyres ............................. 196 Tyre designations .................... 196 Tyre pressure .......................... 196 Tyre deflation detection system .................................... 197

Tread depth ............................. 198 Changing tyre and wheel size . 199 Wheel covers ........................... 199 Tyre chains .............................. 199 Tyre repair kit .......................... 200 Wheel changing ....................... 203 Spare wheel ............................ 204

Jump starting ............................. 207 Towing ....................................... 209

Towing the vehicle ................... 209 Towing another vehicle ........... 210

Appearance care ....................... 211 Exterior care ............................ 211 Interior care ............................. 213 Floor mats ............................... 213

General Information Accessories and vehicle modifications We recommend the use of genuine parts and accessories and factory approved parts specific for your vehicle type. We cannot assess or guarantee reliability of other products - even if they have a regulatory or otherwise granted approval. Any modification, conversion or other changes made to standard vehicle specifications (including, without limitation, software modifications, modifications of the electronic control units) may invalidate the warranty offered by Vauxhall. Furthermore, such changes may affect driver assistance systems, may impact fuel consumption, CO2 emissions and other emissions of the vehicle and cause the vehicle to no longer conform to the operating permit, impacting the validity of your vehicle registration.

Vehicle care 179

Caution

When transporting the vehicle on a train or on a recovery vehicle, the mud flaps might be damaged.

Vehicle storage Storage for a long period of time If the vehicle is to be stored for several months: Wash and wax the vehicle. Have the wax in the engine

compartment and underbody checked.

Clean and preserve the rubber seals.

Fill up fuel tank completely. Change the engine oil. Drain the washer fluid reservoir. Check the coolant antifreeze and

corrosion protection. Adjust tyre pressure to the value

specified for full load.

Park the vehicle in a dry, well ventilated place. Engage first or reverse gear or set selector lever to P. Prevent the vehicle from rolling.

Do not apply the parking brake. Open the bonnet, close all doors

and lock the vehicle.

Storage for a long period of time (electric vehicle) If the vehicle is to be stored for several months: Wash and wax the vehicle. Have the wax in the engine

compartment and underbody checked.

Clean and preserve the rubber seals.

Drain the washer fluid reservoir. Check the coolant antifreeze and

corrosion protection. Adjust tyre pressure to the value

specified for full load.

Park the vehicle in a dry, well ventilated place. Engage first or reverse gear or set selector lever to P. Prevent the vehicle from rolling.

Do not apply the parking brake. Open the bonnet, close all doors

and lock the vehicle. Up to four weeks Plug in the charging cable. Four weeks to twelve months Discharge the high voltage

battery until 30 percent remain on the battery range indicator (battery symbol) on the instrument cluster.

Do not plug in the charging cable. Always store the vehicle in a

place with temperatures between 10 C and 30 C.

Vehicle storage at extreme temperatures may cause damage to the high voltage battery.

180 Vehicle care

Remove the black negative () cable from the 12 V vehicle battery and attach a trickle charger to the vehicle battery terminals or keep the 12 V vehicle battery cables connected and trickle charge from the positive (+) and negative () terminals in the engine compartment.

Every three months, check the battery's state of charge. If the state of charge is below 30 percent, recharge the battery to 30 percent.

Putting back into operation When the vehicle is to be put back into operation: Connect the clamp to the

negative terminal of the vehicle battery. Initialise the power windows 3 22.

Check tyre pressure. Fill up the washer fluid reservoir. Check the engine oil level. Check the coolant level. Fit the number plate if necessary.

Putting back into operation (electric vehicle) When the vehicle is to be put back into operation: Connect the clamp to the

negative terminal of the vehicle battery. Initialise the power windows 3 22.

Check tyre pressure. Fill up the washer fluid reservoir. Check the coolant level. Fit the number plate if necessary.

End-of-life vehicle recovery Information on end-of-life vehicle recovery centres and the recycling of end-of-life vehicles is available on our website, where legally required. Only entrust this work to an authorised recycling centre.

Vehicle checks Performing work

9 Warning

Only perform engine compartment checks when the ignition is off. The cooling fan may start operating even if the ignition is off.

Vehicle care 181

9 Danger

The ignition system uses extremely high voltage. Do not touch.

9 Danger

Electric or Hybrid versions: Never try to perform maintenance work on high voltage components yourself. You may be injured and the vehicle may be damaged. Service and repair of these high voltage components should only be performed by a trained service technician with proper knowledge and tools. Exposure to high voltage may cause shock, burns, and even death. The high voltage

components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring.

9 Warning

Electric or Hybrid versions: Only perform engine compartment checks when the vehicle is off. The cooling fan may start operating even if the vehicle is off.

Caution

Electric or Hybrid versions: Even small amounts of contamination to the liquids can cause damage to vehicle systems.

Do not allow contaminants to contact the fluids, reservoir caps, or dipsticks.

Bonnet Opening

Caution

Before opening the bonnet, deactivate the stop-start system 3 107

Open the driver's door.

182 Vehicle care

Pull the release lever and return it to its original position.

Push the safety catch upwards and open the bonnet.

Closing

Lower the bonnet by using the handle and let it fall into the latch from a low height (20-25 cm). Check that the bonnet is engaged.

Caution

Do not press the bonnet into the latch to avoid dents.

Engine oil Check the engine oil level manually on a regular basis to prevent damage to the engine. Ensure that the correct specification of engine oil is used.

Recommended fluids and lubricants 3 218. The maximum engine oil consumption is 0.6 l per 600 miles. Check with the vehicle on a level surface. The engine must be at operating temperature and switched off for at least 5 min.

Caution

It is the owner's responsibility to maintain the proper level of an appropriate quality oil in the engine.

Vehicle care 183

Different dipsticks are used depending on engine variant.

Pull out the dipstick, wipe it clean, reinsert it fully, pull out and read the engine oil level. When the engine oil level has dropped to the MIN mark, top up the engine oil. We recommend the use of the same grade of engine oil that was used at last change.

The engine oil level must not exceed the MAX mark on the dipstick.

Caution

Overfilled engine oil must be drained or suctioned out. If the oil exceeds the maximum level, do not start the vehicle and contact a workshop.

Capacities 3 225. Fit the cap on straight and tighten it.

Engine coolant The factory filled coolant provides freeze protection down to approx. -37 C.

Caution

Only use approved antifreeze.

Coolant and antifreeze 3 218.

Coolant level

Caution

Too low a coolant level can cause engine damage.

184 Vehicle care

If the cooling system is cold, the coolant level should be above the MIN mark. Top up if the level is low.

9 Warning

Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly.

To top up, use a 1:1 mixture of released coolant concentrate mixed with clean tap water. If no coolant concentrate is available, use clean tap water. Install the cap tightly. Have

the coolant concentration checked and have the cause of the coolant loss remedied by a workshop.

Washer fluid

Fill with clean water mixed with a suitable quantity of approved windscreen washer fluid which contains antifreeze.

Caution

Only washer fluid with a sufficient antifreeze concentration provides protection at low temperatures or a sudden drop in temperature.

Washer fluid 3 218.

Brakes Depending on the driving style, the brake wear may vary significantly.The brake wear may increase when the vehicle is driven over short distances, e.g. in the city. It may be necessary to have the condition of the brakes checked, even between vehicle services. Unless there is a leak in the circuit, a drop in the brake fluid level indicates that the brake pads are worn. Once new brake linings are installed, do not brake unnecessarily hard for the first few journeys.

Brake fluid

9 Warning

Brake fluid is poisonous and corrosive. Avoid contact with eyes, skin, fabrics and painted surfaces.

Vehicle care 185

The brake fluid level must be between the MIN and MAX marks. If fluid level is below MIN seek the assistance of a workshop. Brake and clutch fluid 3 218.

Vehicle battery The vehicle battery is maintenance- free provided that the driving profile allows sufficient charging of the battery. Short-distance-driving and frequent engine starts can discharge the battery. Avoid the use of unnecessary electrical consumers.

Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Laying up the vehicle for more than four weeks can lead to battery discharge. Disconnect the clamp from the negative terminal of the vehicle battery. Ensure the ignition is switched off before connecting or disconnecting the vehicle battery. Battery discharge protection 3 91.

Replacing the vehicle battery Notice Any deviation from the instructions given in this section may lead to temporary deactivation or disturbance of the stop-start system.

When the vehicle battery is being replaced, please ensure that there are no open ventilation holes in the vicinity of the positive terminal. If a ventilation hole is open in this area, it must be closed off with a dummy cap, and the ventilation in the vicinity of the negative terminal must be opened. Ensure that the battery is always replaced by the same type of battery. The vehicle battery has to be replaced by a workshop. Stop-start system 3 107.

Charging the vehicle battery

9 Warning

On vehicles with stop-start system, ensure that the charging potential does not exceed 14.6 V when using a battery charger. Otherwise the vehicle battery may be damaged.

Jump starting 3 207.

186 Vehicle care

Discharge protection

Battery voltage When the vehicle battery voltage is running low, a warning message will appear in the Driver Information Centre. When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning, the heated rear window, heated steering wheel, etc. The deactivated functions are reactivated automatically as soon as conditions permit.

Idle boost If charging of the vehicle battery is required due to battery condition, the power output of the generator must be increased. This will be achieved by an idle boost which may be audible. A message appears in the Driver Information Centre.

Power outlet The power outlets are deactivated in the event of low vehicle battery voltage.

Warning label

Meaning of symbols: No sparks, naked flames or

smoking. Always shield eyes. Explosive

gases can cause blindness or injury.

The vehicle battery contains sulphuric acid which could cause blindness or serious burn injuries.

Keep the vehicle battery out of reach of children.

See the Owner's Manual for further information.

Explosive gas may be present in the vicinity of the vehicle battery.

Power saving mode This mode deactivates electrical consumers to avoid excessive discharging of the vehicle battery. These consumers, such as the Infotainment system, windscreen wipers, low beam headlights, courtesy light, etc. can be used for a total maximum time of about 40 minutes after ignition is switched off.

Changing into power saving mode When power saving mode is activated, a message appears in the Driver Information Centre. An active telephone call using the hands-free option will be maintained for around 10 minutes longer.

Vehicle care 187

Deactivating power saving mode Power saving mode is deactivated automatically when the engine is restarted. Run the engine for a sufficient charge: for less than 10 minutes to use

the consumers for approx. 5 minutes

for more than 10 minutes to use the consumers for up to approx. 30 minutes

Heating functionalities Notice Individual heating functionalities, such as heated seats or heated steering wheel, may be temporarily unavailable in the event of electrical loading constraints. Functions will be resumed after some minutes.

Diesel fuel system bleeding If the tank has been run dry, the diesel fuel system must be bled. Refuel at least five litres diesel. Switch on the ignition for about 60 seconds and switch off again. Then crank the engine. If the engine does not start directly, repeat this process a few times. If the engine then fails to start, seek the assistance of a workshop.

Wiper blade replacement Windscreen

Switch off ignition.

Within one minute after switching off ignition, operate the wiper lever to position the wiper blades vertically on the windscreen. Lift the wiper arm until it stays in the raised position, press button to disengage the wiper blade and remove. Attach the new wiper blade to the wiper arm and push until it engages. Lower wiper arm carefully. To return the wiper arms to their original position, switch on the ignition and operate the wiper lever.

Rear window

188 Vehicle care

Lift wiper arm. Disengage wiper blade as shown in illustration and remove. Attach the wiper blade slightly angled to the wiper arm and push until it engages. Lower wiper arm carefully.

Bulb replacement Before replacing a bulb, ensure that all exterior and interior lights and the ignition are switched off. Only hold a new bulb at the base. Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement.

Bulb check After a bulb replacement switch on the ignition, operate and check the lights.

LED headlights Headlights for low and high beam, daytime running lights and turn lights are designed as LEDs and cannot be changed. Have lights repaired by a workshop in case of failure.

Front fog lights Have lights repaired by a workshop in case of failure.

Tail lights LED tail lights Have lights repaired by a workshop in case of failure.

Rear fog light

1. Turn the bulb holder anticlockwise and remove it from the reflector housing.

Vehicle care 189

2. Slightly press down the bulb, turn it anticlockwise and remove it from the socket.

3. Replace and insert the new bulb into socket by turning clockwise.

4. Insert the bulb socket into the reflector and turn clockwise.

Centre high-mounted brake light Have lights repaired by a workshop in case of failure.

Bulb check Switch on the ignition, operate and check all lights.

Number plate light Have lights repaired by a workshop in case of failure.

Interior lights Have the following bulbs replaced by a workshop: courtesy light, reading lights load compartment light instrument panel illumination

Electrical system Fuses Data on the replacement fuse must match the data on the defective fuse. The three fuse boxes are located in: engine compartment instrument panel

Before replacing a fuse, turn off the respective switch and the ignition. A blown fuse can be recognised by its melted wire.

Caution

Do not replace the fuse until the cause of the fault has been remedied.

Some functions are protected by several fuses. Fuses may also be inserted without existence of a function.

190 Vehicle care

Fuse extractor A fuse extractor may be located in the cover of the left side of the instrument panel. The extractor has two sides, each side is designed for a different type of fuses.

Grab the fuse with the fuse extractor and withdraw the fuse.

Engine compartment fuse box

The fuse box is in the front left of the engine compartment. Disengage the cover and remove it.

After having changed defective fuses, close the fuse box cover and lock it. If the fuse box cover is not closed correctly, malfunction may occur.

Non-electric vehicle

No. Circuit

1 Climate control system

2 Brake system

3 Fuse box (right side of the instrument panel)

4 Brake system

Vehicle care 191

No. Circuit

5 Body control module

6 Cooling fan

7 Body control module

8 Engine control module / Fuel pump

9 NOX sensor / Diesel water sensor

10 Engine control module

11 Engine control module

12 Diagnostic link connector

13 Body control module

14 Battery sensor

15 Trailer control module

16 Right headlight

17 Engine control module / NOX sensor

18 Right high beam

19 Left high beam

No. Circuit

20 Engine control module / Fuel pump / Diesel heater

21 Starter

22 Automatic transmission

23 Climate control system

24 Climate control system

25 Fuse box (trailer)

27 Body control module

28 Selective catalytic reduction system

29 Windscreen wiper

30 Diesel glow plug control unit

31 Climate control system

32 Steering wheel

Electric vehicle

No. Circuit

1 Climate control system

2 Brake system

3 Fuse box (right side of the instrument panel)

4 Brake system

6 Cooling fan

7 Body control module

8 Valve climate control

9 Electric vehicle control unit

10 Electric vehicle control unit

11 Electric vehicle control unit

12 Diagnostic link connector

13 Body control module / Climate control system

15 E-service plug

16 Right headlight

18 Right high beam

192 Vehicle care

No. Circuit

19 Left high beam

20 Electric vehicle control unit

22 Cooling fan / Vacuum pump / Electric vehicle control unit

23 AC/DC converter / DC/DC converter

25 High voltage battery interface

26 Motor controller (electric motor and inverter)

27 Body control module

29 Windscreen wiper

30 Body control module

31 Body control module

32 Steering wheel

Instrument panel fuse box Fuse box on the left side of the instrument panel

In right-hand drive vehicles, the fuse box is located behind a cover in the glovebox. Open the glovebox and remove the cover.

Non-electric vehicle No. Circuit

1 Radar / Electric steering / Clutch switch

3 Inductive charging / Keyless operation

4 Horn

5 Windscreen washer

6 Windscreen washer

7 USB

8 Rear wiper

Vehicle care 193

No. Circuit

9 Interior lighting

10 Central locking system

11 Central locking system

12 Diagnostic connector module

13 Climate control system

14 Alarm / Vauxhall Connect / Keyless operation

17 Instrument cluster

21 Power button / Anti-theft locking system

22 Rain sensor / Light sensor / Camera

23 Seatbelt reminder / Brake twin function switch / Trailer

24 Infotainment / Parking assist / Rear view camera

25 Airbag

27 Anti-theft alarm system

28 Trailer

No. Circuit

29 Infotainment

31 Cigarette lighter / 12 V power outlet

32 Heated steering wheel

33 Climate control system / Auto matic transmission

34 Parking assist / Exterior mirror adjustment

35 Exterior lighting

36 Interior lighting

Electric vehicle No. Circuit

1 Radar / Electric steering / Clutch switch

3 Inductive charging / Keyless operation

4 Horn

5 Windscreen washer

6 Windscreen washer

No. Circuit

7 USB

8 Rear wiper

9 Interior lighting

10 Central locking system

11 Central locking system

12 Diagnostic connector module

13 Climate control module / radio faceplate

14 Alarm / Vauxhall Connect / Keyless operation

15 Electronic shifter module / Headlight control unit

16 Low voltage network separation device

17 Instrument cluster

18 Reserved for Aftersales equip ment

19 Steering column control / Steering wheel controls

194 Vehicle care

No. Circuit

21 Power button

22 Rain sensor / Light sensor / Camera

23 Seatbelt reminder / Brake twin function switch / Trailer

24 Infotainment / Parking assist / Rear view camera

25 Airbag

27 Anti-theft alarm system

28 Trailer

29 Infotainment

31 Cigarette lighter / 12 V power outlet

32 Heated steering wheel

33 Pedestrian safety alert / Temperature preconditioning

34 Parking assist / Exterior mirror adjustment

No. Circuit

35 Exterior lighting

36 Interior lighting

Fuse box on the right side of the instrument panel

In right-hand drive vehicles, the fuse box is located behind a cover in the instrument panel. Disengage cover at the bottom side and remove. Remove the bracket.

No. Circuit

1 Heated rear window

2 Heated exterior mirrors

3 Power windows front

4 Exterior mirror adjustment / Folding mirrors

5 Power windows rear

10 Heated front seats

Vehicle care 195

Vehicle tools Tools Vehicles with spare wheel Open the load compartment.

The tools are located either in the toolbag on the carpet or in the toolbox under the carpet: Jack (1) Wheel wrench (2) Towing eye (3) Wheel bolt cover remover (4)

Chock (5) Adapter for the locking wheel

nuts (6)

To use the chock, fold apart and stick together.

Vehicles without spare wheel

The towing eye is located in a box below the floor cover in the load compartment. Tyre repair kit 3 200.

196 Vehicle care

Wheels and tyres

Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage. Seek the assistance of a workshop in the event of damage or unusual wear.

Winter tyres Winter tyres improve driving safety at temperatures below 7 C and should therefore be fitted on all wheels. In accordance with country-specific regulations, affix the speed sticker in the driver's field of view. All tyre sizes are permitted as winter tyres 3 226.

Tyre designations E.g. 225/55 R 18 98 V 225 : tyre width, mm 55 : cross-section ratio (tyre height

to tyre width), % R : belt type: Radial RF : type: RunFlat 18 : wheel diameter, inches 98 : load index e.g. 98 is equivalent

to 750 kg V : speed code letter

Speed code letter: Q : up to 100 mph S : up to 112 mph T : up to 118 mph H : up to 130 mph V : up to 150 mph W : up to 168 mph

Choose a tyre appropriate for the maximum speed of your vehicle. The maximum speed is achievable at kerb weight with driver (75 kg) plus 125 kg payload. Optional equipment could reduce the maximum speed of the vehicle.

Directional tyres Directional tyres should be mounted so that they rotate in the correct direction. The proper rotation direction is indicated by a symbol (e.g. an arrow) on the sidewall.

Tyre pressure Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. This also applies to vehicles with tyre deflation detection system.

Tyre pressure 3 226.

Vehicle care 197

The tyre pressure information label on theleft B-pillar indicates the original equipment tyres and the correspondent tyre pressures. The tyre pressure data refers to cold tyres. It applies to summer and winter tyres. Always inflate the spare tyre to the pressure specified for full load. Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear. Tyre pressures differ depending on various options. For the correct tyre pressure value, follow the procedure below: 1. Identify the engine identifier code.

Engine data 3 224. 2. Identify the respective tyre.

The tyre pressure tables show all possible tyre combinations 3 226. For the tyres approved for your vehicle, refer to the EEC Certificate of Conformity provided with your vehicle or other national registration documents.

The driver is responsible for correct adjustment of tyre pressure.

9 Warning

If the pressure is too low, this can result in considerable tyre warm- up and internal damage, leading to tread separation and even to tyre blow-out at high speeds.

9 Warning

For specific tyres the recommended tyre pressure as shown in the tyre pressure table may exceed the maximum tyre pressure as indicated on the tyre. Never exceed the maximum tyre pressure as indicated on the tyre.

Temperature dependency The tyre pressure depends on the temperature of the tyre. During driving, tyre temperature and pressure increase. Tyre pressure values provided on the tyre

information label and tyre pressure chart are valid for cold tyres, which means at 20 C. The pressure increases by nearly 1.5 psi for a 10 C temperature increase. This must be considered when warm tyres are checked.

Tyre deflation detection system The tyre deflation detection system continually checks the rotation speed of all four wheels and warns on low tyre pressure condition once vehicle is driving. This is achieved by comparing tyre rolling circumference with reference values and further signals. If a tyre loses pressure the control indicator w illuminates and a warning message is displayed in the Driver Information Centre. Control indicator w 3 74. In this case reduce speed, avoid sharp cornering and strong braking. Stop at next safe opportunity and check tyre pressure.

198 Vehicle care

After adjusting tyre pressure initialise system to extinguish the control indicator and restart system. If the failure continues to be displayed, contact a workshop. The system is inoperable when the ABS or Electronic Stability Control has a malfunction or a temporary spare wheel is used. Once the tyre has been refitted, check the tyre pressure with cold tyres and initialise the system.

Caution

Deflation detection system warns just about low tyre pressure condition and does not replace regular tyre maintenance by the driver.

System initialisation After tyre pressure correction or wheel change, the system must be initialised to learn new circumference reference values:

1. Always ensure that all four tyres have correct tyre pressure 3 226.

2. Apply parking brake. 3. Initialise the system via the Info

Display 3 77. 4. Reset is confirmed by pop-up

indication. After initialisation system automatically calibrates to new tyre pressures during driving. After longer drive the system will adopt and monitor new pressures. Always check tyre pressure with cold tyres. System has to be reinitialised when: Tyre pressure has been changed Load condition has been

changed Wheels have been swapped or

exchanged The system will not warn instantaneously on a tyre blow out or a rapid deflation. This is due to required calculation time.

Tread depth Check tread depth at regular intervals. For safety reasons, it is recommended that the tread depth of the tyres on one axle should not vary by more than 2 mm.

The legally permissible minimum tread depth (1.6 mm) has been reached when the tread has worn down as far as one of the tread wear indicators (TWI). Their position is indicated by markings on the sidewall.

Vehicle care 199

If there is more wear at the front than the rear, swap round front wheels and rear wheels periodically. Ensure that the direction of rotation of the wheels remains the same. Tyres age, even if they are not used. We recommend tyre replacement every 6 years.

Changing tyre and wheel size If tyres of a different size than those fitted at the factory are used, it may be necessary to reprogramme the tyre deflation detection system and make other vehicle modifications. Tyre deflation detection system 3 197. Have the label with tyre pressures replaced.

9 Warning

The use of unsuitable tyres or wheels may lead to accidents and will invalidate the vehicle operating permit.

Wheel covers Wheel covers and tyres that are factory approved for the respective vehicle and comply with all of the relevant wheel and tyre combination requirements must be used. If the wheel covers and tyres used are not factory approved, the tyres must not have a rim protection ridge. Wheel covers must not impair brake cooling.

9 Warning

Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents.

Vehicles with steel wheels: When using locking wheel nuts, do not attach wheel covers. Spare wheels: Do not use wheel covers.

Tyre chains

Tyre chains are only permitted on the front wheels. Only use tryre chains designed to be used with tyre type of the vehicle: For 16 inch and 17 inch tyres,

only use Polaire XP9 120 (9mm) tyre chains.

For 18 inch tyres, only use Polaire 0112 PSSD tyre chains.

Notice The use of tyre chains and the maximum allowed speed is regulated by country-specific legislation.

200 Vehicle care

9 Warning

Damage may lead to tyre blowout.

When fitting the tyre chains follow the instructions provided by the manufacturer of the tyre chains. After having fitted the tyre chains, stop the vehicle after having driven a short distance and make sure that the tyre chains are correctly tightened.

Temporary spare wheel The use of tyre chains is not permitted on the temporary spare wheel.

Tyre repair kit Minor damage to the tyre tread can be repaired with the tyre repair kit. Do not remove foreign bodies from the tyres. Tyre damage exceeding 4 mm or that is at tyre's sidewall cannot be repaired with the tyre repair kit.

9 Warning

Do not drive faster than 50 mph. Do not use for a lengthy period. Steering and handling may be affected.

In the case of a flat tyre: Apply the parking brake and engage first gear, reverse gear or P.

The tyre repair kit is in the load compartment below the floor cover. 1. Remove the sealant bottle and the

compressor.

2. Pull speed limit label from sealant bottle and place it in driver's visible area.

3. Remove the electrical connection cable and air hose from the stowage compartments on the underside of the compressor.

Vehicle care 201

4. Screw the compressor air hose to the connection on the sealant bottle.

5. Fit the sealant bottle into the bracket on the compressor. Set the compressor near the tyre in such a way that the sealant bottle is upright.

6. Unscrew valve cap from defective tyre.

7. Screw the filler hose to the tyre valve.

8. The switch on the compressor must be set to J.

9. Connect the compressor plug to the power outlet or cigarette lighter socket 3 59. To avoid discharging the battery, we recommend running the engine.

10. Set the rocker switch on the compressor to I. The tyre is filled with sealant.

11. The compressor pressure gauge briefly indicates up to 600 kPa (6 bar) whilst the sealant bottle is emptying (approx. 30 seconds). Then the pressure starts to drop.

12. All of the sealant is pumped into the tyre. Then the tyre is being inflated.

13. The prescribed tyre pressure should be obtained within 10 minutes. Tyre pressure 3 226.

202 Vehicle care

When the correct pressure is obtained, switch off the compressor. If the prescribed tyre pressure is not obtained within 10 minutes, remove the tyre repair kit. Move the vehicle one tyre rotation. Reattach the tyre repair kit and continue the filling procedure for 10 minutes. If the prescribed tyre pressure is still not obtained, the tyre is too badly damaged. Seek the assistance of a workshop.

Drain excess tyre pressure with the button on the air hose. Do not run the compressor longer than 10 minutes.

14. Detach the tyre repair kit. Remove sealant bottle from bracket. Screw the filler hose to the free connection of the sealant bottle. This prevents sealant from escaping. Stow tyre repair kit in load compartment.

15. Remove any excess sealant using a cloth.

16. Continue driving immediately so that sealant is evenly distributed in the tyre. Drive between 13 mph and 37 mph. After driving approx. 3 miles but no more than 10 minutes, stop and check tyre pressure. Screw compressor air hose directly onto tyre valve when

doing this. Fill tyre as described before. Drain excess tyre pressure with the button on the air hose. If tyre pressure hasn't decreased under 200 kPa (2 bar), set it to the correct value 3 226. Otherwise the vehicle must not be used. Seek assistance of a workshop. Repeat the checking procedure once more after driving further 3 miles but no more than 10 minutes to check that there is no more loss of pressure. If the tyre pressure has fallen below 200 kPa (2 bar), the vehicle must not be used. Seek the assistance of a workshop.

17. Stow away tyre repair kit in load compartment.

Notice The driving characteristics of the repaired tyre are severely affected, therefore have this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn compressor off for at least 30 min.

Vehicle care 203

The built-in safety valve opens at a pressure of seven bar (102 psi). Note the expiry date of the kit. After this date its sealing capability is no longer guaranteed. Pay attention to storage information on sealant bottle. Replace the used sealant bottle. Dispose of the bottle as prescribed by applicable laws. The compressor and sealant can be used from approx. -30 C.

Wheel changing Make the following preparations and observe the following information: Park the vehicle on a level, firm

and non-skid surface. The front wheels must be in the straight- ahead position.

Apply the parking brake and engage first gear, reverse gear or P.

Place a chock under the wheel diagonally opposite the wheel to be changed.

If the ground on which the vehicle is standing is soft, a solid board (approx. 1 cm thick) should be placed under the jack.

Take heavy objects out of the vehicle before jacking up.

No people or animals may be in the vehicle when it is jacked-up.

Never crawl under a jacked-up vehicle.

Do not start the vehicle when it is raised on the jack.

Before screwing in the wheel bolts, clean them.

9 Warning

Do not grease wheel bolts.

Tightening torques

9 Warning

Ensure to use always the correct wheel bolts if changing the wheels. When installing the spare

wheel for temporary usage, the bolts for alloy wheels can also be used.

Depending on the wheel rim material, two different bolts are available.

Tightening torque for alloy wheels is 115 Nm.

Tightening torque for steel wheels is 115 Nm. Use the correct wheel bolts for the respective wheels.

204 Vehicle care

Jacking positions The jacking positions shown refer to the use of lifting arms and accessory jacks used for changing winter / summer tyres.

Rear arm position of the lifting platform centrically under the relevant vehicle jacking point.

Front arm position of the lifting platform centrically under the relevant vehicle jacking point.

Spare wheel The spare wheel can be classified as a temporary spare wheel depending on the size compared to the other mounted wheels and country regulations. In this case a permissible maximum speed applies, even though no label at the spare wheel indicates this.

Only mount one temporary spare wheel. Do not drive faster than 50 mph. Take curves slowly. Do not use for a long period of time.

Caution

The use of a spare wheel that is smaller than the other wheels or in combination with winter tyres could affect driveability. Have the defective tyre replaced as soon as possible.

The spare wheel is located in the load compartment beneath the floor covering.

Vehicle care 205

To remove: 1. Open the floor cover 3 48. 2. The temporary spare wheel is

secured with a wing nut. Unscrew nut and take out the spare wheel.

3. When, after a wheel change, no wheel is placed in the spare wheel well, tighten the wing nut and close floor cover.

4. After wheel change back to full size wheel, place the temporary spare wheel in the well and secure with the wing nut.

Only mount one temporary spare wheel. The permissible maximum speed on the label on the temporary spare wheel is only valid for the factory-fitted tyre size.

Fitting the spare wheel Make the following preparations and observe the following information: Park the vehicle on a level, firm

and non-skid surface. The front wheels must be in the straight- ahead position.

Apply the parking brake and engage first gear, reverse gear or P.

Place a chock under the wheel diagonally opposite the wheel to be changed.

Remove the spare wheel. Never change more than one

wheel at once. Use the jack only to change

wheels in case of puncture, not for seasonal winter or summer tyre change.

The jack is maintenance-free. If the ground on which the vehicle

is standing is soft, a solid board (approx. 1 cm thick) should be placed under the jack.

Take heavy objects out of the vehicle before jacking up.

No people or animals may be in the vehicle when it is jacked-up.

Never crawl under a jacked-up vehicle.

Do not start the vehicle when it is raised on the jack.

Before screwing in the wheel bolts, clean them.

9 Warning

Do not grease wheel bolts.

9 Warning

Ensure to use always the correct wheel bolts if changing the wheels. When installing the spare wheel for temporary usage, the bolts for alloy wheels can also be used.

206 Vehicle care

Note that the spare wheel is secured by the conical contact of each bolt if the wheel bolts for the alloy wheels are used. In this case, the washers do not come into contact with the spare wheel.

1. Disengage wheel bolt caps with the wheel bolt cover remover. Vehicle tools 3 195. Steel wheels with cover: Pull off the wheel cover.

2. Attach the wheel wrench and loosen each wheel bolt by half a turn. The wheels might be protected by locking wheel nuts. To loosen

these specific nuts first attach the adapter onto the head of the nut before installing the wheel wrench. The adapter is located in the tool bag 3 195.

3. Ensure the jack is correctly positioned under the relevant vehicle jacking point.

4. Set the jack to the necessary height. Position it directly below the jacking point in a manner that prevents it from slipping.

Vehicle care 207

Ensure that the edge of the body fits into the notch of the jack.

With the jack correctly aligned rotate wheel wrench until wheel is clear of the ground.

5. Unscrew the wheel nuts. 6. Change the wheel. 7. Screw on the wheel nuts. 8. Lower the vehicle and remove

jack. 9. Install the wheel wrench ensuring

that it is located securely and tighten each bolt in a crosswise sequence. Tightening torque is 115 Nm.

If the vehicle is equipped with alloy wheels, note that the wheel bolts can also be used for the steel spare wheel. In this case, the spare wheel is secured by the conical contact of each bolt.

10. Stow the replaced wheel, the vehicle tools and the adapter for the locking wheel nuts 3 195.

11. Check the tyre pressure of the installed tyre and the wheel nut torque as soon as possible.

Stowing a damaged full size wheel in the load compartment The spare wheel well is not designed for other tyre sizes than the spare wheel. A damaged full size wheel must be stowed in the load compartment and secured properly. Loading information 3 50.

Jump starting Do not start with quick charger. A vehicle with a discharged vehicle battery can be started using jump leads and the vehicle battery of another vehicle.

Caution

Never jump start another vehicle with an electric vehicle.

9 Warning

Be extremely careful when starting with jump leads. Any deviation from the following instructions can lead to injuries or damage caused by battery explosion or damage to the electrical systems of both vehicles.

208 Vehicle care

9 Warning

Avoid contact of the battery with eyes, skin, fabrics and painted surfaces. The fluid contains sulphuric acid which can cause injuries and damage in the event of direct contact.

Never expose the vehicle battery to naked flames or sparks.

A discharged vehicle battery can already freeze at a temperature of 0 C. Defrost the frozen battery before connecting jump leads.

Wear eye protection and protective clothing when handling a battery.

Use a booster battery with the same voltage (12 V). Its capacity (Ah) must not be much less than that of the discharged vehicle battery.

Use jump leads with insulated terminals and a cross section of at least 16 mm2 (25 mm2 for diesel engines).

Do not disconnect the discharged vehicle battery from the vehicle.

Switch off all unnecessary electrical consumers.

Do not lean over the vehicle battery during jump starting.

Do not allow the terminals of one lead to touch those of the other lead.

The vehicles must not come into contact with each other during the jump starting process.

Apply the parking brake, transmission in neutral, automatic transmission in P.

Lead connection order: 1. Connect the red lead to the

positive terminal of the booster battery.

2. Connect the other end of the red lead to the positive terminal of the discharged battery.

3. Connect the black lead to the negative terminal of the booster battery.

4. Connect the other end of the black lead to a vehicle grounding point of your vehicle in the engine compartment.

Route the leads so that they cannot catch on rotating parts in the engine compartment. To start the engine: 1. Start the engine of the vehicle

providing the jump. 2. After 5 minutes, start the other

engine. Start attempts should be made for no longer than 15 seconds at an interval of 1 minute.

Vehicle care 209

3. Allow both engines to idle for approx. 3 minutes with the leads connected.

4. Switch on electrical consumers e.g. headlights, heated rear window.

5. Reverse above sequence exactly when removing leads.

Towing Towing the vehicle

Remove the cap. The towing eye is stowed with the vehicle tools 3 195.

Screw in the towing eye as far as it will go until it stops in a horizontal position. Attach the tow rod to the towing eye. The towing eye must only be used for towing and not for recovering the vehicle. Switch on ignition to release steering wheel lock and to permit operation of brake lights, horn and windscreen wiper.

210 Vehicle care

Caution

Deactivate the driver assistance systems like active emergency braking 3 139, otherwise the vehicle may automatically brake during towing.

Switch the selector lever to neutral. Release the parking brake.

Caution

Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle.

When the engine is not running, considerably more force is needed to brake and steer. To prevent the entry of exhaust gases from the towing vehicle, switch on the air recirculation and close the windows.

When towing an electric vehicle or a vehicle equipped with an automatic transmission, transport the vehicle on a platform or tow it with the front wheels lifted. Seek the assistance of a workshop. After towing, unscrew the towing eye. Insert cap with the flange into the recess and fix cap by pushing.

Towing another vehicle

Remove the cap. The towing eye is stowed with the vehicle tools 3 195.

Vehicle care 211

Screw in the towing eye as far as it will go until it stops in a horizontal position. Attach a tow rope or better still a tow rod to the towing eye. The towing eye must only be used for towing and not for recovering a vehicle.

Caution

Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle.

After towing, unscrew the towing eye. Insert cap with the upper flange into the recess and fix cap by pushing.

Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use a de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using a de-icing agent, have the locks regreased by a workshop.

Washing The paintwork of your vehicle is exposed to environmental influences. Bird droppings, dead insects, resin, pollen and the like should be cleaned off immediately, as they contain aggressive constituents which can cause paint damage. If using a vehicle wash, comply with the vehicle wash manufacturer's instructions. The windscreen wiper and rear window wiper must be

switched off. Remove antenna and external accessories such as roof racks etc. If you wash your vehicle by hand, make sure that the insides of the wheel housings are also thoroughly rinsed out. Clean edges and folds on opened doors and the bonnet as well as the areas they cover. Clean bright metal mouldings with a cleaning solution approved for aluminium to avoid damages.

Caution

Always use a cleaning agent with a pH value of 4 to 9. Do not use cleaning agents on hot surfaces.

Do not clean the engine compartment with a steam-jet or high-pressure jet cleaner. Thoroughly rinse and leather-off the vehicle. Rinse leather frequently. Use separate leathers for painted and glass surfaces: remnants of wax on the windows will impair vision.

212 Vehicle care

Have the door hinges of all doors greased by a workshop.

Exterior lights Headlight and other light covers are made of plastic. Do not use any abrasive or caustic agents, do not use an ice scraper, and do not clean them dry.

Polishing and waxing Polishing is necessary only if the paint has become dull or if solid deposits have become attached to it. Plastic body parts must not be treated with wax or polishing agents.

Windows and wiper blades Switch off wipers before handling in their areas. Use a soft lint-free cloth or chamois leather together with window cleaner and insect remover. When cleaning the rear window from inside, always wipe in parallel to the heating element to prevent damage.

For mechanical removal of ice, use a sharp-edged ice scraper. Press the scraper firmly against the glass so that no dirt can get under it and scratch the glass. Clean smearing wiper blades with a soft cloth and window cleaner. Also make sure to remove any residues such as wax, insect residues and similar from the window. Ice residues, pollution and continuous wiping on dry windows will damage or even destroy the wiper blades.

Wheels and tyres Do not use high-pressure jet cleaners. Clean rims with a pH-neutral wheel cleaner. Rims are painted and can be treated with the same agents as the body.

Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a workshop.

Underbody Some areas of the vehicle underbody have a PVC undercoating while other critical areas have a durable protective wax coating. After the underbody is washed, check the underbody and have it waxed if necessary. Bitumen / rubber materials could damage the PVC coating. Have underbody work carried out by a workshop. Before and after winter, wash the underbody and have the protective wax coating checked.

Towing equipment Do not clean the coupling ball bar with a steam-jet or high-pressure jet cleaner.

Vehicle care 213

Interior care Interior and upholstery Only clean the vehicle interior, including the instrument panel fascia and panelling, with a dry cloth or interior cleaner. Clean the leather upholstery with clear water and a soft cloth. In case of heavy soiling, use leather care. The instrument cluster and the displays should only be cleaned using a soft damp cloth. If necessary use a weak soap solution. Clean fabric upholstery with a vacuum cleaner and brush. Remove stains with an upholstery cleaner. Clothing fabrics may not be colourfast. This could cause visible discolourations, especially on light- coloured upholstery. Removable stains and discolourations should be cleaned as soon as possible. Clean seat belts with lukewarm water or interior cleaner.

Caution

Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery. The same applies to clothing with sharp-edged objects, like zips or belts or studded jeans.

Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if necessary. Do not use any other agent. Avoid solvents and petrol in particular. Do not use high- pressure jet cleaners.

Floor mats

9 Warning

If a floor mat has the wrong size or is not properly installed, it can interfere with the accelerator pedal and/or brake pedal, what can cause unintended acceleration

and/or increased stopping distance which can cause a crash and injury.

Use the following guidelines for proper floor mat usage. The original equipment floor mats

were designed for your vehicle. If the floor mats need replacing, it is recommended that certified floor mats be purchased. Always check that the floor mats do not interfere with the pedals.

Use the floor mat with the correct side up. Do not turn it over.

Do not place anything on top of the driver side floor mat.

Use only a single floor mat on the driver side.

Inserting and removing the floor mats The driver side floor mat is held in place by two retainers. To install the floor mat: 1. Move the seat backwards as far

as possible.

214 Vehicle care

2. Align slots in the mat with the retainers, as shown.

3. Push the mat to the floor. Removing 1. Move the seat backwards as far

as possible. 2. Remove the mat.

Service and maintenance 215

Service and maintenance

General information ................... 215 Service information .................. 215

Recommended fluids, lubricants and parts .................................... 218

Recommended fluids and lubricants ................................ 218

General information Service information In order to ensure economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals as specified. The detailed, up-to-date service schedule for your vehicle is available at the workshop. Severe operating conditions exist if one or more of the following circumstances occur frequently: Cold starting, stop and go operation, e.g. for taxis and police vehicles, trailer operation, mountain driving, driving on poor and sandy road surfaces, increased air pollution, presence of airborne sand and high dust content, driving at high altitude and large variations of temperature. Under these severe operating conditions, certain service work may be required more frequently than the regular service interval indicated in

the service display. Contact a workshop for customised service schedules. Service display 3 67.

216 Service and maintenance

Service intervals

Engine code EB2ADTD, EB2ADTS DV5RCE Electric vehicle

Country group 1 12,500 miles / 1 year 20,000 miles / 1 year1) 16,000 miles / 2 years2)

Country group 2 10,000 miles / 1 year 20,000 miles / 1 year1) 16,000 miles / 2 years2)

Country group 3 10,000 miles / 1 year 10,000 miles / 1 year 16,000 miles / 2 years2)

Country group 4 10,000 miles / 1 year 10,000 miles / 1 year 16,000 miles / 1 years

Country group 5 6,000 miles / 1 year 6,000 miles / 1 year 16,000 miles / 1 years

1) Unless otherwise indicated in the service display. 2) Initial service interval is 8,000 miles / 1 year

Country Group 1: Andorra, Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, Greece, Iceland, Republic of Ireland, Italy, Liechtenstein, Luxembourg, Malta, Monaco, Netherlands, Norway, Portugal, San Marino, Spain, Sweden, Switzerland, United Kingdom. Country Group 2: Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, North Macedonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia. Country Group 3: Albania, Montenegro, Serbia. Country Group 4: Israel, South Africa, Turkey, Lesotho, Swaziland.

Service and maintenance 217

Country Group 5: All other countries which are not listed in the previous country groups. Confirmations Confirmation of service is recorded in the Service and warranty booklet. The date and mileage is completed with the stamp and signature of the servicing workshop. Make sure that the Service and warranty booklet is completed correctly as continuous proof of service is essential if any warranty or goodwill claims are to be met, and is also a benefit when selling the vehicle.

218 Service and maintenance

Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that meet the recommended specifications.

9 Warning

Operating materials are hazardous and could be poisonous. Handle with care. Pay attention to information given on the containers.

Engine oil Engine oil is identified by its quality and its viscosity. Quality is more important than viscosity when selecting which engine oil to use. The oil quality ensures e.g. engine cleanliness, wear protection and oil aging control, whereas viscosity grade gives information on the oil's thickness over a temperature range.

Select the appropriate engine oil based on its quality and on the minimum ambient temperature 3 222.

Topping up engine oil

Caution

In case of any spilled oil, wipe it up and dispose it properly.

Engine oils of different manufacturers and brands can be mixed as long as they comply with the required engine oil quality and viscosity. Use of engine oils for all petrol engines with only ACEA quality is prohibited, since it can cause engine damage under certain operating conditions. Select the appropriate engine oil based on its quality and on the minimum ambient temperature 3 222.

Additional engine oil additives The use of additional engine oil additives could cause damage and invalidate the warranty.

Engine oil viscosity grades The SAE viscosity grade gives information of the thickness of the oil. Multigrade oil is indicated by two figures, e.g. SAE 5W-30. The first figure, followed by a W, indicates the low temperature viscosity and the second figure the high temperature viscosity. Select the appropriate viscosity grade depending on the minimum ambient temperature 3 222. All of the recommended viscosity grades are suitable for high ambient temperatures.

Coolant and antifreeze Use only Lobrid antifreeze approved for the vehicle. Consult a workshop. The system is factory filled with coolant designed for excellent corrosion protection and frost protection down to approx. -28 C. In cold regions with very low temperatures the factory filled coolant provides frost protection down to approx. -37 C. This concentration should be maintained all year round.

Service and maintenance 219

The use of additional coolant additives that intend to give additional corrosion protection or seal against minor leaks can cause function problems. Liability for consequences resulting from the use of additional coolant additives will be rejected.

Washer fluid Use only washer fluid approved for the vehicle to prevent damage of wiper blades, paintwork, plastic and rubber parts. Consult a workshop.

Brake and clutch fluid Over time, brake fluid absorbs moisture which will reduce braking effectiveness. The brake fluid should therefore be replaced at the specified interval. Use only brake fluid approved for the vehicle. Consult a workshop.

AdBlue Only use AdBlue to reduce the nitrogen oxides in the exhaust emission 3 111.

220 Technical data

Technical data

Vehicle identification .................. 220 Vehicle identification number . . 220 Identification plate ................... 220 Engine identification ................ 221

Vehicle data ............................... 222 Recommended fluids and lubricants ................................ 222

Engine data ............................. 224 Vehicle dimensions ................. 225 Capacities ................................ 226 Tyre pressures ........................ 227

Vehicle identification Vehicle identification number

The Vehicle Identification Number may be embossed on the instrument panel, visible through the windscreen, or in the engine compartment on the right body panel.

Identification plate

The identification plate is located on the front left or right door frame.

Technical data 221

Information on identification label: 1 : manufacturer 2 : type approval number 3 : vehicle identification number 4 : permissible gross vehicle weight

rating in kg 5 : permissible gross train weight

in kg 6 : maximum permissible front axle

load in kg 7 : maximum permissible rear axle

load in kg 8 : vehicle-specific or country-

specific data

The combined total of front and rear axle loads must not exceed the permissible gross vehicle weight. Vehicle's kerb weight depends on the specification of the vehicle, e.g. optional equipment and accessories. Refer to the EEC Certificate of Conformity provided with your vehicle or other national registration documents. The technical data is determined in accordance with European Community standards. We reserve the right to make modifications.

Specifications in the vehicle documents always have priority over those given in this manual.

Engine identification The technical data tables show the engine identifier code. Engine data 3 224. To identify the respective engine, refer to the engine power in the EEC Certificate of Conformity provided with your vehicle or other national registration documents.

222 Technical data

Vehicle data Recommended fluids and lubricants Required engine oil quality Country groups 3 215

Countries included in country groups 1 to 3 EB2FA EB2ADT EB2ADTD EB2ADTS EP6FADTXD DV5RC DV5RD DV5RE DV5RCE

EP6FDTM EB2DT EC5F DW10FC DV6D DV6FD DV6FE

Vauxhall Original engine oil B71 2010 / B71 2312 B71 2312

Engine EC5F: B71 2290, B71 2296 or B71 300 may also be used.

Countries included in country group 4 all engines

Vauxhall Original engine oil B71 2302 / B71 2297

Engine EC5F: B71 2296 or B71 300 may also be used.

Technical data 223

Countries included in country group 5 all engines

Vauxhall Original engine oil B71 2297

Engine oil viscosity grades

B71 2010 B71 2312 B71 2302 B71 2297

Engine oil viscosity grade SAE 0W-20 SAE 0W-30 SAE 0W-30 SAE 5W-30

224 Technical data

Engine data Engine identifier code EB2ADTD EB2ADTS DV5RCE Electric vehicle Sales designation 1.2 T 1.2 T 1.5 D

Piston displacement [cm3] 1199 1199 1499

Engine power [kW] 74 96 81 100

at rpm 5500 5500 3500

Torque [Nm] 205 230 250 260

at rpm 1750 1750 1750

Fuel type Petrol Petrol Diesel

Octane rating RON1)2)

recommended 95 95

possible 98 98

possible 91 91

Additional fuel type

1) A country specific label at the fuel filler flap can supersede the engine specific requirement. 2) In certain countries, the use of a particular fuel, e.g. a specific octane rating, may be required to ensure proper engine operation.

Technical data 225

Vehicle dimensions Length [mm] 4151

Width with two exterior mirrors folded [mm] 1791

Width with two exterior mirrors [mm] 1987

Height (without antenna) [mm] 1531 / 15323)

Length of load compartment floor [mm] 667

Length of load compartment with folded second row [mm] 1418

Load compartment width between wheel arches [mm] 1021

Wheelbase [mm] 2557 / 25613)

Turning circle diameter [m] 11.08

3) electric vehicle

226 Technical data

Capacities Engine oil

Engine EB2ADTD EB2ADTS DV5RCE

including filter [l] 3.5 3.5 4.0

between MIN and MAX [l] 1.0 1.0 1.5

Fuel tank

Petrol, refilling quantity [l] 44

Diesel, refilling quantity [l] 41

AdBlue tank

AdBlue, refilling quantity [l] 13

High voltage battery

Battery capacity [kWh] 50

Technical data 227

Tyre pressures Vehicle with up to 3 people With full load

Engine Tyres front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi])

EB2ADTD, EB2ADTS, DV5RCE

215/65 R16, 215/60 R17, 215/55 R18

220/2.2 (32) 220/2.2 (32) 270/2.7 (39) 270/2.7 (39)

Electric vehicle 215/65 R16, 215/60 R17, 215/55 R18

250/2.5 (36) 250/2.5 (36) 250/2.5 (36) 300/3.0 (45)

EB2ADTD, EB2ADTS, DV5RCE

125/85 R16 Temporary spare wheel

420/4.2 (60) 420/4.2 (60) 420/4.2 (60) 420/4.2 (60)

228 Customer information

Customer information

Customer information ................ 228 Declaration of conformity ......... 228 REACH .................................... 230 Software update ...................... 230 Registered trademarks ............ 230

Vehicle data recording and pri vacy ........................................... 231

Event data recorders ............... 231 Radio Frequency Identification (RFID) ..................................... 234

Customer information Declaration of conformity Radio transmission systems This vehicle has systems that transmit and / or receive radio waves subject to Directive 2014/53/EU. The manufacturers of the systems listed below declare conformity with Directive 2014/53/EU. The full text of the EU declaration of conformity for each system is available at the following internet address: www.opel.com/conformity. Importer is Opel / Vauxhall, Bahnhofsplatz, 65423 Ruesselsheim am Main, Germany.

Infotainment system Multimedia Navi Pro / Multimedia Navi Continental Automotive Czech Republic s.r.o Prumyslov 1851, 250 01 Brandys nad Labem, Czech Republic

Operation frequency (MHz)

Maximum output (dBm)

BT 2402.0 - 2480.0

4.1

Wifi 2412.0 - 2462.0

16.7

Infotainment system Multimedia Robert Bosch Car Multimedia GmbH Robert-Bosch-Strasse 200, 31139 Hildesheim, Germany Operation frequency: 2400.0 - 2483.5 MHz Maximum output: 4 dBm

Wireless charger Continental Automotive GmbH Siemensstrasse 12, 93055 Regensburg, Germany Operation frequency: 90.0 - 119.0 kHz Maximum output: 39.24dBA/m at 3m

Customer information 229

Antenna module Hirschmann Car Communication GmbH Stuttgarter Strasse 45-51, 72654 Neckartenzlingen, Germany Operation frequency: N/A Maximum output: N/A ASK Industrie SpA C.P. 110 c/o U.P. RE2, 42121 Reggio Emilia, Italy Operation frequency: N/A Maximum output: N/A Fiamm France - RCA Spa 12 rue Augustin Fresnel, 78420 Aubergenville, France Operation frequency: N/A Maximum output: N/A

Electronic key transmitter Valeo Comfort and Driving Assistance 76, rue Auguste Perret 94046 Crteil - CEDEX France Operation frequency: 433.05 - 434.79 MHz Maximum output: -6,85 dBm

Electronic key receiver Valeo Comfort and Driving Assistance 76, rue Auguste Perret 94046 Crteil - CEDEX France

Operation frequency

Maximum output (dBm)

BT 2402.0 - 2480.0

5.0

Radio 125 kHz - 7.3

Radio remote control transmitter Huf Hlsbeck & Frst GmbH & Co. KG Steeger Str. 17, 42551 Velbert, Germany Operation frequency: 433.05 - 434.79 MHz Maximum output: -14 dBm

Radio remote control receiver Aptiv Services France SAS 22 Avenue des Nations ZAC Paris Nord II 93420 Villepinte France Operation frequency: 125 kHz Maximum output: 66 dBA/m at 10m

Immobiliser Kostal Bulgaria Automotive Pazardzhik ul. "Sinitevska" 4, 4400 Southern Industrial Zone, Bulgaria Operation frequency: 119 - 134 kHz Maximum output: 72 dBA/m at 10m

Radar unit ZF TRW Autocruise SAS Secteur de la Pointe du Diable, Avenue du technople, 29280 Plouzane, France Operation frequency: 76.0 - 77.0 GHz Maximum output: 28 dBm

BTA Module Marelli S.p.A. Viale A. Borletti 61/63, 20011 Corbetta, Italy

230 Customer information

Operation frequency (MHz)

Maximum output (dBm)

GSM 900

880 -960 33

GSM 1800

1710 - 1880 30

UMTS 880 -960 24

1920 - 2170 24

ICASA type approval numbers List of all Independent Communications Authority of South Africa (ICASA) type approval numbers: TA-2018/5025, TA-2018/5031, TA-2017/2387, TA-2018/1848, TA-2018/208, TA-2017/1106, TA-2017/3180

REACH Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) is a European Union regulation adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals. Visit www.opel.com for further information and for access to the Article 33 communication.

Software update The Infotainment system can download and install selected software updates over a wireless connection. Notice The availability of these over-the-air vehicle software updates varies by vehicle and country. Find more information on our home page.

Internet connection Downloading over-the-air vehicle software updates requires internet connectivity, which can be accessed

through a password-protected Wi-Fi hotspot, e.g. provided by a mobile phone. An internet connection can be established via the Info Display. Info Display 3 77.

Updates The system will prompt for certain updates to be downloaded and installed. There is also an option to check for updates manually. Updates can be checked manually via the Info Display. Follow the on- screen prompts in the respective menu. Info Display 3 77. Notice Steps for downloading and installing updates may vary by vehicle. Notice During the installation process, the vehicle may not be operational.

Registered trademarks Apple Inc. Apple CarPlay is a trademark of Apple Inc.

Customer information 231

App Store and iTunes Store are registered trademarks of Apple Inc. iPhone, iPod, iPod touch, iPod nano, iPad and Siri are registered trademarks of Apple Inc. Bluetooth SIG, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. DivX, LLC DivX and DivX Certified are registered trademarks of DivX, LLC. Google Inc. Android and Google Play Store are trademarks of Google Inc. Velcro Companies Velcro is a registered trademark of Velcro Companies. Verband der Automobilindustrie e.V. AdBlue is a registered trademark of the VDA.

Vehicle data recording and privacy Event data recorders Electronic control units are installed in your vehicle. Control units process data which is received by vehicle sensors, for example, or which they generate themselves or exchange amongst themselves. Some control units are necessary for the safe functioning of your vehicle, others assist you while you drive (driver assistance systems), while others provide comfort or infotainment functions. The following contains general information about data processing in the vehicle. You will find additional information as to which specific data is uploaded, stored and passed on to third parties and for what purpose in your vehicle under the key word Data Protection closely linked to the references for the affected functional characteristics in the relevant owner's manual or in the general terms of sale. These are also available online.

Operating data in the vehicle Control units process data for operation of the vehicle. This data includes, for example: vehicle status information (e.g.

speed, movement delay, lateral acceleration, wheel rotation rate, "seat belts fastened" display)

ambient conditions (e.g. temperature, rain sensor, distance sensor)

As a rule such data is transient and is not stored for longer than an operational cycle, and only processed on board the vehicle itself. Often control units include data storage (including the vehicle key). This is used to allow information to be documented temporarily or permanently on vehicle condition, component stress, maintenance requirements and technical events and errors.

232 Customer information

Depending on technical equipment levels, the data stored is as follows: system component operating

states (e.g. fill level, tyre pressure, battery status)

faults and defects in important system components (e.g. lights, brakes)

system reactions in special driving situations (e.g. triggering of an airbag, actuation of the stability control systems)

information on events damaging the vehicle

for electric vehicles the amount of charge in the high-voltage battery, estimated range

In special cases (e.g. if the vehicle has detected a malfunction), it may be necessary to save data that would otherwise just be volatile. When you use services (e.g. repairs, maintenance), the operating data saved can be read together with the vehicle identification number and used where necessary. Staff working for the service network (e.g. garages, manufacturers) or third parties (e.g.

breakdown services) can read the data from the vehicle. The same applies to warranty work and quality assurance measures. Data is generally read via the OBD (On-Board Diagnostics) port prescribed by law in the vehicle. The operating data read documents the technical condition of the vehicle or individual components and assists with fault diagnosis, compliance with warranty obligations and quality improvement. This data, in particular information on component stress, technical events, operator errors and other faults, is transmitted to the manufacturer where appropriate, together with the vehicle identification number. The manufacturer is also subject to product liability. The manufacturer potentially also uses operating data from vehicles for product recalls. This data can also be used to check customer warranty and guarantee claims. Fault memories in the vehicle can be reset by a service company when carrying out servicing or repairs or at your request.

Comfort and infotainment functions Comfort settings and custom settings can be stored in the vehicle and changed or reset at any time. Depending on the equipment level in question, these include seat and steering wheel position

settings chassis and air conditioning

settings custom settings such as interior

lighting You can input your own data in the infotainment functions for your vehicle as part of the selected features. Depending on the equipment level in question, these include multimedia data such as music,

videos or photos for playback in an integrated multimedia system

address book data for use with an integrated hands-free system or an integrated navigation system

Customer information 233

input destinations data on the use of online services

This data for comfort and infotainment functions can be stored locally in the vehicle or be kept on a device that you have connected to the vehicle (e.g. a smartphone, USB stick or MP3 player). Data that you have input yourself can be deleted at any time. This data can only be transmitted out of the vehicle at your request, particularly when using online services in accordance with the settings selected by you.

Smartphone integration, e.g. Android Auto or Apple CarPlay If your vehicle is equipped accordingly, you can connect your smartphone or another mobile device to the vehicle so that you can control it via the controls integrated in the vehicle. The smartphone image and sound can be output via the multimedia system in this case. At the same time, specific information is transmitted to your smartphone. Depending on the type of integration,

this includes data such as position data, day / night mode and other general vehicle information. For more information, please see the operating instructions for the vehicle / infotainment system. Integration allows selected smartphone apps to be used, such as navigation or music playback. No further integration is possible between smartphone and vehicle, in particular active access to vehicle data. The nature of further data processing is determined by the provider of the app used. Whether you can define settings, and if so which ones, is dependent on the app in question and your smartphone's operating system.

Online services If your vehicle has a radio network connection, this allows data to be exchanged between your vehicle and other systems. The radio network connection is made possible by means of a transmitter device in your vehicle or a mobile device provided by you (e.g. a smartphone). Online functions can be used via this radio network connection. These include online services and applications / apps provided to you by the manufacturer or other providers.

Proprietary services In the case of the manufacturer's online services, the relevant functions are described by the manufacturer in an appropriate location (e.g. Owner's Manual, the manufacturer's website) and the associated data protection information is provided. Personal data may be used to provide online services. Data exchange for this purpose takes place via a protected connection, e.g. using the manufacturer's IT systems provided for the purpose. Collection,

234 Customer information

processing and use of personal data for the purposes of preparation of services take place solely on the basis of legal permission, e.g. in the case of a legally prescribed emergency communication system or a contractual agreement, or by virtue of consent. You can activate or deactivate the services and functions (which are subject to charges to some extent) and, in some cases, the vehicle's entire radio network connection. This does not include statutory functions and services such as an emergency communication system.

Third party services If you make use of online services from other providers (third parties), these services are subject to the liability and data protection and usage conditions of the provider in question. The manufacturer frequently has no influence over the content exchanged in this regard.

Therefore, please note the nature, scope and purpose of the collection and use of personal data within the scope of third party services provided by the service provider in question.

Radio Frequency Identification (RFID) RFID technology is used in some vehicles for functions such as tyre pressure monitoring and immobiliser. It is also used in connection with conveniences such as radio remote controls for door locking / unlocking and starting. RFID technology in Vauxhall vehicles does not use or record personal information or link with any other Vauxhall system containing personal information.

Customer information 235

236

Index A Accessories and vehicle

modifications .......................... 178 Active emergency braking.... 76, 139 Adaptive cruise control .............. 131 AdBlue.................................. 74, 111 Adjustable air vents ................... 100 Advanced lane keep assist... 72, 160 Advanced parking assist............ 147 Airbag and belt tensioners ........... 70 Airbag deactivation ................ 37, 70 Airbag label................................... 32 Airbag system .............................. 32 Air conditioning regular

operation ................................ 101 Air conditioning system ................ 93 Air intake .................................... 101 Air vents...................................... 100 Antilock brake system ................ 121 Antilock brake system (ABS) ....... 72 Anti-theft alarm system ................ 18 Anti-theft locking system .............. 17 Appearance care........................ 211 Armrest......................................... 28 Automatic anti-dazzle .................. 22 Automatic crash notification (ACN) 81 Automatic light control ................. 84 Automatic locking ........................ 14 Automatic operation of electric

parking brake off....................... 72

Automatic post collision braking ........................................ 125, 142

Automatic transmission ............. 116 Autostop............................... 75, 107 Auxiliary heater............................. 99

B Battery discharge protection ........ 91 BlueInjection............................... 111 Bonnet ....................................... 181 Brake and clutch fluid................. 218 Brake and clutch system ............. 71 Brake assist ............................... 124 Brake fluid .................................. 184 Brakes........................................ 184 Breakdown.................................. 209 Bulb replacement ....................... 188

C Capacities .................................. 226 Car wash mode.......................... 114 Catalytic converter ..................... 111 Central locking system .................. 9 Centre console storage ............... 46 Changing tyre and wheel size . . . 199 Charging..................................... 167 Charging cable........................... 165 Charging cable connected............ 75 Charging status.......................... 172 Charging system .......................... 70 Charging types........................... 164

237

Child locks ................................... 15 Child restraint installation

locations ................................... 42 Child restraints.............................. 38 Child restraint systems ................ 38 Climate control systems............... 92 Clock............................................. 59 Control indicators.......................... 68 Control of the vehicle ................. 103 Controls........................................ 55 Convex shape .............................. 20 Coolant and antifreeze............... 218 Cruise control ............................ 127 Cupholders .................................. 45 Curtain airbag system .................. 36 Curve lighting................................ 86

D Danger, Warnings and Cautions . . . 4 Daytime running lights ................. 85 Declaration of conformity............ 228 DEF............................................ 111 Deflation detection system........... 74 Diesel exhaust fluid.................... 111 Diesel fuel system bleeding ....... 187 Door open .................................... 76 Door panel storage....................... 46 Doors............................................ 16 Drive modes............................... 120 Driver alert.................................. 162

Driver assistance systems.......... 127 Driver Information Centre............. 76 Driving characteristics and

towing tips .............................. 176 Driving hints................................ 103

E Electric adjustment ...................... 20 Electrical system......................... 189 Electric drive unit........................ 114 Electric parking brake................. 122 Electric parking brake fault........... 72 Electronic climate control system 95 Electronic driving programmes . . 118 Electronic key system..................... 8 Electronic Stability Control and

Traction Control system.... 73, 125 Emergencies............................... 103 Emergency call............................. 81 End-of-life vehicle recovery ....... 180 Engine compartment fuse box ... 190 Engine coolant ........................... 183 Engine coolant temperature ........ 73 Engine coolant temperature

gauge ....................................... 67 Engine data ............................... 224 Engine exhaust .......................... 110 Engine identification................... 221 Engine oil ................... 182, 218, 222 Engine oil level monitor................ 67

Engine oil pressure ...................... 74 Entry lighting ................................ 90 Event data recorders.................. 231 Exhaust filter......................... 73, 110 Exit lighting .................................. 91 Exterior care .............................. 211 Exterior light ................................. 75 Exterior lighting............................. 83 Exterior mirrors............................. 20

F Fault ........................................... 119 Fixed air vents ........................... 100 Floor mats................................... 213 Folding mirrors ............................. 20 Forward collision alert................. 138 Front airbag system ..................... 35 Front fog lights ............... 75, 88, 188 Front pedestrian protection........ 142 Front seats.................................... 26 Fuel............................................. 173 Fuel for diesel engines .............. 174 Fuel for petrol engines ............... 173 Fuel gauge ................................... 65 Fuses ......................................... 189

G Gauges......................................... 63 Gear selection ........................... 117 Gear shifting................................. 72

238

General information............ 164, 176 Glovebox ..................................... 45

H Hand brake................................. 122 Hazard warning flashers .............. 87 Headlight flash ............................. 85 Headlight range adjustment ........ 85 Headlights..................................... 83 Headlights when driving abroad . . 85 Head restraints ............................ 25 Heated mirrors ............................. 21 Heated rear window ..................... 24 Heated steering wheel ................. 55 Heating ........................................ 29 Heating and ventilation system . . . 92 High beam ............................. 75, 84 High beam assist.................... 75, 84 High voltage battery gauge.......... 65 Hill start assist ........................... 124 Horn ............................................. 56

I Identification plate ..................... 220 Ignition switch positions ............. 104 Immobiliser .................................. 19 Indicators...................................... 68 Inductive charging........................ 60 Info Display................................... 77 Instrument cluster ........................ 61 Instrument panel fuse box ......... 192

Instrument panel illumination control ...................................... 89

Instrument panel overview ........... 53 Interior care ............................... 213 Interior lighting.............................. 89 Interior lights ........................ 90, 189 Interior mirrors.............................. 21 Interruption of power supply ...... 119 Introduction .................................... 3

J Jump starting ............................. 207

K Keys ............................................... 6 Keys, locks..................................... 6

L Lane keep assist.................. 72, 158 Lashing eyes ............................... 49 LED headlights..................... 75, 188 Light switch .................................. 83 Load compartment ................ 16, 47 Load compartment cover ............. 48 Loading information ..................... 50 Low beam..................................... 75 Low fuel ....................................... 74

M Malfunction indicator light ............ 70 Manual anti-dazzle ...................... 21

Manual mode ............................. 118 Manual seat adjustment............... 27 Manual transmission .................. 119 Massage....................................... 29 Matrix-LED headlights.................. 86 Misted light covers ....................... 89

N New vehicle running-in .............. 104 Number plate light ..................... 189

O Object detection systems........... 143 Odometer ..................................... 63 Oil, engine.......................... 218, 222 Operation.................................... 114 Outside temperature .................... 58 Overrun cut-off ........................... 107

P Parking ...................................... 109 Parking assist ............................ 143 Parking brake....................... 71, 122 Parking lights ............................... 89 Particulate filter........................... 110 Pedestrian safety alert.................. 56 Pedestrian safety alert fault.......... 75 Performing work ........................ 180 Peripheral lighting......................... 91 Post collision braking.................. 125 Power button.............................. 104

239

Power indicator gauge.................. 66 Power outlets ............................... 59 Power seat adjustment ................ 28 Power windows ............................ 22 Preheating ................................... 73 Programmable charging............. 171 Puncture..................................... 204

Q Quickheat..................................... 99

R Radio Frequency Identification

(RFID)..................................... 234 Radio remote control ..................... 7 Rain sensor.................................. 75 REACH....................................... 230 Reading lights .............................. 90 Rear floor storage cover .............. 48 Rear fog light ................. 75, 88, 188 Rear view camera ...................... 154 Rear window wiper and washer . . 58 Recommended fluids and

lubricants ........................ 218, 222 Reduced engine power................ 75 Refuelling ................................... 175 Regenerative braking................. 124 Registered trademarks............... 230 Reversing lights ........................... 89 Ride control systems.................. 125 Roadside assistance.................... 81

Roller blinds ................................. 24 Roof load...................................... 50 Roof rack ..................................... 50

S Seat belt reminder ....................... 69 Seat belts ..................................... 29 Seat heating................................. 29 Seat position ................................ 26 Selective catalytic reduction....... 111 Selector lever.............................. 117 Service ............................... 101, 215 Service display ............................ 67 Service information .................... 215 Service vehicle soon .................... 71 Side airbag system ...................... 35 Side blind spot alert.................... 153 Sidelights...................................... 83 Smart access.......................... 9, 104 Software update......................... 230 SOS.............................................. 81 Spare wheel ............................... 204 Speed limiter............................... 129 Speed limit recognition 127, 129, 131 Speedometer ............................... 63 Sport mode ................................ 126 Starting and operating................ 104 Starting the engine .................... 106 Steering...................................... 103 Steering wheel adjustment .......... 55

Steering wheel controls ............... 55 Stop engine.................................. 71 Stop-start system........................ 107 Storage......................................... 45 Storage compartments................. 45 Sunvisor lights ............................. 90 Sun visors .................................... 24 Symbols ......................................... 4 System check............................... 71

T Tachometer ................................. 64 Tailgate......................................... 16 Tail lights ................................... 188 Temperature preconditioning....... 99 Three-point seat belt .................... 30 Tools .......................................... 195 Total vehicle range....................... 66 Tow bar....................................... 176 Towing................................ 176, 209 Towing another vehicle ............. 210 Towing the vehicle ..................... 209 Traffic sign assistant................... 157 Trailer coupling........................... 176 Trailer towing ............................. 177 Transmission display ................. 116 Tread depth ............................... 198 Trip odometer .............................. 63 Turn lights .............................. 69, 88 Tyre chains ................................ 199

240

Tyre deflation detection system . 197 Tyre designations ...................... 196 Tyre pressure ............................ 196 Tyre pressures ........................... 227 Tyre repair kit ............................. 200

U Ultrasonic parking assist............. 143 Upholstery.................................. 213 USB port....................................... 59 Using this manual .......................... 3

V Vauxhall Connect......................... 81 Vehicle battery ........................... 185 Vehicle checks............................ 180 Vehicle data................................ 222 Vehicle data recording and

privacy..................................... 231 Vehicle dimensions .................... 225 Vehicle identification number . . . . 220 Vehicle jack................................ 195 Vehicle locator lighting................. 91 Vehicle messages ....................... 79 Vehicle personalisation ............... 80 Vehicle ready................................ 75 Vehicle security............................ 17 Vehicle specific data ...................... 3 Vehicle storage........................... 179 Vehicle tools............................... 195 Ventilation..................................... 92

W Warning chimes ........................... 80 Warning lights............................... 68 Warning triangle .......................... 49 Washer fluid ............................... 184 Wheel changing ......................... 203 Wheel covers ............................. 199 Wheels and tyres ....................... 196 Windows....................................... 22 Windscreen................................... 22 Windscreen wiper and washer .... 56 Winter tyres ............................... 196 Wiper blade replacement .......... 187

Copyright by Vauxhall Motors Ltd.

Manualsnet FAQs

If you want to find out how the Mokka Vauxhall works, you can view and download the Vauxhall Mokka 2020 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Vauxhall Mokka as well as other Vauxhall manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Vauxhall Mokka. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Vauxhall Mokka 2020 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Vauxhall Mokka 2020 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Vauxhall Mokka 2020 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Vauxhall Mokka 2020 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Vauxhall Mokka 2020 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.