Uniden TL19-DV TV Owner's Manual PDF

1 of 32
1 of 32

Summary of Content for Uniden TL19-DV TV Owner's Manual PDF

TL16-DV TL19-DV TL22-DV

LED TV/DVD Combo

For more exciting new products please visit our website: Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

Caution and Safety Information

2UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

This symbol alerts to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of serious injury or electric shock.

This symbol indicates an important note regarding operation is described here.

Correct disposal of this Product (Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/recycling center. Please help us to conserve the environment we live in!

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.

Electrical Safety

To prevent overload, dont share the same mains supply socket with too many other items of equipment. - Do not place any connecting wires where they may be stepped on or tripped over. - Do not place heavy items on the leads, which may damage them. - Hold the Mains plug, not the wires, when removing from a socket. - During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if

outdoor) and mains power from the supply. - The PCB of the TV is conformal coated to prolong electrical function in marine

environments. - Do not allow water or moisture to enter the TV. Do NOT use in wet or moist areas such as

Bathrooms, steamy kitchens or near swimming pools.

Pull the plug out immediately, and seek professional help if: - the mains plug or cable is damaged. - liquid is spilt onto the set, or if it is accidentally exposed to water or moisture. - anything accidentally penetrates the ventilation slots. - the set does not work normally. - Do NOT remove the safety covers. There are no user serviceable parts inside.You may

invalidate the warranty. Qualified personnel only are permitted to service this apparatus. - To avoid battery leakage, remove exhausted batteries from the remote control handset, or when not using for along period. - Do NOT break open or throw exhausted batteries on a fire.

Physical safety

Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2) clearance all around the unit.

Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good care of the remote control, do not drop it or allow it to come into contact with liquids.

To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For stubborn stains, you may use a damp soft cloth with diluted detergent.

Caution and Safety Information 2 Contents 3 Included in the Box 4 Controls and Indicators 4 Connectors 5 Remote Control 6 Basic Operation 8 Power on/off 8 Initial Start-up and Tuning Channels 8 Selecting an Input Source (TV, DVD etc) 8 Viewing Channels 9 The Channel Display Plate 9 Freeview EPG: Electronic Programme Guide 10 Recording TV Programs 11 Timeshifting (live pause) TV programs 11 Remind/Record Schedule 12 Menu Settings 13 Picture menu 14 Sound menu 14 Channel menu (In DTV mode) 15 Channel Management 15 Favourite Management 15 Country 15 Auto Search 16 DTV Manual Search 16 ATV Manual Search 16 Feature menu 17 Lock 17 Language 18 Clock 18 Sleep Timer 18 Auto Power Off 18 Hearing Impaired 18 PVR/Timeshift 19 Setup menu 21 DVD Operation 22 Selecting DVD Mode (INPUT) 22 Inserting a DVD Disc 22 Playing a DVD 22 DVD Setup Mode 23 Viewing Multimedia Content from a USB Drive 25 Basic Operation 25 Trouble shooting 28 Specifications 29 Warranty 31

Contents

3UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Included in the Box

4UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Manual Controls

INPUT: Display the input source menu. MENU: Display/exit the OSD menu. CH+/-: Scan through channels. VOL+/-: Adjust the volume. PLAY: Play DVD content EJECT: Eject DVD disc POWER: Turn on/standby the TV set.

If any items are missing or damaged, contact your place of purchase immediately. Never use damaged products!

Controls & Indicators

Owners Manual TV Stand Installation guide

LED TV/DVD (TL16-DV, TL19DV, TL22-DV) Remote Control Stand and Screws

AC AdaptorMounting Bracket and Screws DC Cable

Power Indicator LED & IR receiver lens for Remote Control

Connectors

5UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

NOTE

DVD insert and eject is only available when power is on AND source INPUT is set to DVD.

1 12-24VDC POWER

2 Headphone out

3 PC Audio Input

4 VGA (PC) Input

5 Video (AV) Input

6 L/R Audio Inputs (for AV or YPBPR video)

7 Coaxial Out

8 HDMI Input

9 USB (Media) Input

10 RF

11 Component Input (Y)

12 Component Input (PB)

13 Component Input (PR)

14 DVD disc input

8

9

10

11

12

13

14

1 2 3 4 5 6 7

6UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Remote Control The remote control uses infra-red (IR). Point it towards the front of the TV at the power indicator lens. The remote control may not work correctly if it is operated out of range or out of angle.

POWER: Turn the TV on/standby. INPUT: Press to display the input source menu. PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECT: Change the screen display mode. NUMBER BUTTONS: Press 0-9 to select a TV channel directly when you are watching TV.

: Return to the previous channel viewed. FAV: Display the favorite program list. MUTE: Press to mute the sound, press again or press VOL+ to unmute. SUBTITLE: Turn on/off the subtitle display in DTV mode VOL+ /- : Adjust the volume. CH / : Scan through channels. REC.LIST: Record List. REC: Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: Call up the Electronic Program Guide. Available only in DTV mode and when not viewing the Menu. CURSOR KEYS ( , , , , OK): Allows you to navigate the on-screen menus and adjust the system settings to your preference. CH.LIST: Display the channel list. MENU: System setup menu. EXIT: Exit the OSD menu. COLOUR KEYS: Press to select the on screen function associated with the respective colour.

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Pro ram Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the syste setti gs to your preference.

MENU: System setup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off th subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

Remote Control

7UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU: System setup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

When using DVD:

D.SET: DVD system setup. D.MENU: DVD play list/Disc menu. D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

: Load/eject DVD disc. : Play/Pause program. : Previous chapter. : Next chapter.

: Stop program. : Fast reverse. : Fast forward.

TV/TXT: Turn off/on the Teletext display. TV/RADIO: To switch to TV or Radio state in DTV mode. CANCEL: Cancel the Teletext display.

EVEAL: Reveal any hidden text. INDEX: Go to Teletext index. HOLD: Hold or carry on the current Teletext subpage. SIZE: Press to toggle the Teletext page views between top half, bottom half and normal view. SUBPAGE: Press to enter T letext subpages, press again to cancel.

NOTE

Te etext service may not be available in all areas.

8UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Basic Operation

Power on/off 1. Connect to the power supply with the power adaptor. 2. To turn on the TV on or off press POWER on the remote control or on TV side control bar.

Initial Start-up and Tuning Channels When the TV is powered on for the first time the Auto Installation menu will appear on screen. Press OK (4 times) to accept the following;

Country: New Zealand Language: English Auto Power Off: OFF Auto Search: DTV.

The TV then searches and stores local digital terrestrial channels. (DVB-T transmissions Within coverage area). Depending on your location the process may take a few minutes.

NOTE

You will need to re-tune (search for) DTV channels again if the TV is moved to a different geographic location. From Menu mode select; Channels, Auto Search and then DTV.

Selecting an Input Source (TV, DVD etc) Press INPUT on the remote control or on the TV sidebar control to display the Input source menu.

Input Description DTV Digital TV ATV Analogue TV AV Video (AV) Input YPBPBR Component Video (YPbPr) Input HDMI HDMI Input PC PC (VGA) + PC Audio Input Media USB Media Input DVD DVD Mode

Press INPUT again or use / on the remote control or CH +/- on the TV sidebar control to select the input source. The input source will change automatically after 3 seconds of inaction, or for immediate action, press OK on the remote control.

NOTE

Before you select the input source, make sure the connections are prepared.

Basic Operation

9UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Viewing Channels

NOTE To watch Digital TV channels make sure INPUT setting is DTV.

There are several methods to change the channel; 1. Use the Channel keys or enter the channel number on the remote control to change

channels.

2. Press OK to call up the Channel List. Then use the / keys to select the desired channel. Press OK to select and change the channel.

3. Press FAV on the remote control to call up the Favourite lists (see Menu Settings/ Channel/Favourite Management on page 15. Then use the / keys to select the desired channel. And then press OK to select and change the channel.

4. Select a channel from the Electronic Programme Guide.

The Channel Display Plate Information about the channel and the current TV programme appears at the bottom of the screen whenever a channel is changed or when called up by pressing DISPLAY. Press to view the next programmes information (Next) and then press to go back to the current programmes information (Now). Press / to navigate across all channels, and view their respective information; press ENTER to watch the selected channel.

The channel info automatically displays for a short period whenever a channel is changed.

You can also press DISPLAY to display the channel info.

If the selected channel supports special features such as Teletext (TTX), Parental Rating, High Definition (HD) or Subtitles, then this information will be displayed in the channel display.

While the channel display is showing, press DISPLAY to bring up a synopsis of the programme.

Basic Operation

10UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Freeview EPG: Electronic Programme Guide Press EPG on the remote control to call up the 8-day Progamme Guide.

NOTE

The EPG may take a several seconds to load before displaying on screen.

You can navigate (, , and ) throughout the EPG.

Yellow Key: Back 24 hours. Blue Key: Forward 24 hours.

Press DISPLAY to view the selected programmes synopsis. Press EPG to toggle between Now/Next and 8-day program guide views. Press OK to change the channel to the currently displayed view. Press EXIT to close and exit EPG.

Recording TV Programs

11UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

The TV can record television programmes onto a connected optional external USB drive (see note below regarding minimum USB drive requirements).

1. Press REC on the remote control to start recording in DTV mode. REC displays at the bottom left of the screen and the power LED blinks red and

green while recording.

2. Press the STOP button

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU: System setup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

on the remote control to exit the recording mode.

3. Press REC.LIST to display the Recorded files list. Use / to select the desired file and press the PLAY button

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Retur to the previous channel viewed. F V: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU: System etup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

to playback the recording. The recorded programme can also be played from the Movie selection in MEDIA mode.

NOTE

Recording quality and TimeShift performance will vary depending on the USB drive speed. When a new USB drive is connected to the USB input the TV will automatically assess and then display the drives write speed. Please note the write speed. For optimum performance a minimum write speed of at least 50Mbps (6.25MB/s) is recommended. Newer USB 2.0 devices should meet this criteria. Older USB 2.0 and USB 1.x devices will not be suitable. Recording time will vary depending on size of USB drive. The size of recorded HD files are typically large so a dedicated USB mass storage drive (for example: with over 100MB available storage) is recommended.

Timeshifting (live pause) TV Programs When watching a Digital TV program you can activate Timeshift to enable live pause.

1. Press the PAUSE button

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press t display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the scre n display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU: System s tup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

on the remote control to start Timeshift in DTV mode.

2. Press the STOP button

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: ress to display the input s urce menu.

: Turn the TV n/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the scre n display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navig t the -screen menus and adjust the system settings to your preference.

MENU: System setup menu. EXIT: xit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc m nu.

5

Remote Control

to exit the Timeshift mode.

3. Press the PLAY button

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET .MENU D.LAND.SUB

POWER IN UT: Press to display the n ut source menu.

: Turn the TV n/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through hannels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start r cording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your pr ference.

MENU: System setup menu. EXIT: Exit the OSD me u.

CH.LIST: Display he channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

to play the program you are recording from the beginning, and the timeshift will be going on.

The Timeshift time menu on the top right corner shows the time difference between the current picture and the live broadcast picture

NOTE

Timeshift requires space on the connected USB drive to use as a temporary buffer during the Timeshift operation. The Timeshift buffer setting is set to Auto by default. When Timeshift is stopped the drive space is made available - meaning the Timeshifted program is not stored for future playback. During Timeshift, if the digital TV signal is lost, Timeshift will pause until the digital TV signal is stable again.

Recording TV Programs

12UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Remind/Record Schedule You can book a remind (change to) or record of preferred programmes by date & time with the Remind/Record Schedule feature.

In DTV mode:

1. Press MENU then select Feature then PVR/Timeshift and then select Remind/ Record Schedule.

The Remind/Record Schedule page displays.

2. Use the colour keys and the navigation keys to add/edit a reminder (recorder setting is off) or recording (recorder setting is on).

NOTE

A digital TV signal is required for the scheduler to extract programme information.

Approximate Recording Times

Depending on the content being recorded, the recording times may become shorter than indicated. (The times provided below are an estimate, use only as a guide)

Recording Mode Recording Times Capacity MPEG4 SD (576i/576p) Channel 1 hour 1.5GB MPEG4 HD (720i/1080i) Channel 1 hour 4GB

Menu Settings

13UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Use / button to select the main menu, and press / OK button to enter the submenu. In the submenu, use / button to select the function item, press / OK button to enter the setup menu, then press / button to adjust, or press / to select and press OK / / button to confirm.

* (Press MENU / button to return to the upper menu.) * (Press EXIT button to exit the menu display.)

NOTE

Some items only appear on the OSD when the relevant Input signal is selected or connected.

Navigate the OSD menu following the tips on the bottom banner.

Use / to view more options.

SubmenuMain menu

Press MENU to display the On Screen Display (OSD) menu as below:

Navigation Tips

Menu Settings

14UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Sound menu

Picture menu

Description

Picture Mode: Select your desired picture mode from; Dynamic, Standard, Mild or User. Brightness: Adjust image brightness level. Contrast: Adjust image contrast. Sharpness: Adjust the sharpness (invalid in VGA/PC mode). Colour: Adjust image colour saturation. Tint: Control the tint ( NTSC mode only). Colour Temp.: Select an optimum colour temperature mode to suit your viewing from; Warm, Cool or Standard. Aspect Ratio: Change the aspect for the screen from; 4:3, 16:9, Full, Zoom1, Zoom2 or Panorama. Noise Reduction: If the broadcast signal received is weak, you can select the Noise Reduction option to reduce the video noise level between; Off, Low, Middle and High.

Description

Sound Mode: Select your desired sound mode from; Standard, Movie, Music, Speech or User. Bass: Adjust the level of lower-pitched sounds. Treble: Adjust the level of the higher pitched sounds. Balance: Adjust the audio output between left and right speakers. Surround: Turn on/off the surround sound function. Auto Volume Level (AVL): Select to maintain the same volume level between input sources. SPDIF: Select the spdif mode for the TV from; off, PCM or Auto.

Menu Settings

15UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Channel menu (In DTV mode)

Description

Channel Management: Enter the Channel management menu to edit the channels.

Delete: Press RED button to mark the channels you want to delete, it will hint you when you exit.

Lock: Press GREEN button to lock/ unlock a channel. You have to enter the password to view the channel. The Lock Enable setting (in Feature/Lock/ Lock Enable) must be set to ON for this function to become active.

Skip: Press YELLOW button to skip the channel or cancel the setting, and the channel will not be selected when using CH+/-.

Swap: Press BLUE button to mark a channel, press / to move, and press OK to swap the position.

Favorite Management: Add/remove channels to up to favourites list using the colour buttons; Fav1 (Red), Fav2 (Green), Fav3 (Yellow) or Fav4 (Blue).

Country: Select the country.

New Zealand

Menu Settings

16UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

When Lock is on, enter the Password (Lock Password in Feature menu) to start Auto and Manual Search.

Auto Search: Press OK to enter the Auto Search menu, select search mode, and press OK button to start auto search.

NOTE

1. ALL: Auto search channels for DTV, ATV and Radio. DTV: Auto search channels for DTV and radio. ATV: Auto search channels for ATV.

2. When the TV is auto tuning, press MENU to stop auto tuning and return to preview menu.

DTV Manual Search: Enter the DTV Manual Search menu. Press / button to select the Channel item, and press / button to select the channel, then press / button to select the Start item, and press / button to manual search.

ATV Manual Search: Enter the ATV Manual Search menu.

Current Channel: Select the current channel for manual searching.

Search: Press OK to enter the search menu, and manual search the frequency by / button.

Fine Tune: Press OK to enter the Fine tune menu, and fine tune the frequency by / button.

Color/Sound System: Select the Colour/ Sound system for the program.

Menu Settings

17UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Feature menu

Description

Lock: This menu allows you to lock certain features of the television so that they cannot be used or viewed. For example if you dont want certain channels viewed by children or if the television is to be used in a hotel and you want certain channels be locked. When you enter the system locked menu you will be prompted to enter the 4 digit PIN code.

NOTE The default PIN code it is 0000.

Lock Enable: Turn on/off the Lock functions.

NOTE

When Lock Enable is turned ON the Parental Guidance and Change Pin Code menu options below will become available. And the Lock functions in Channel Management, Auto Search, DTV Manual Search, ATV manual Search in Channel menu will be locked.

Parental Guidance: Select the Parental Guidance mode, or turn off the function.

Change Pin Code: Press OK to enter, first enter the current 4 digit code, then enter your new code and confirm your new code.

Menu Settings

18UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Hotel Mode: Enter the Hotel Setting menu.

Hotel Lock: Turn on/off the Hotel Lock function.

Channel Lock: Disable the Channel menu in OSD.

Picture Lock: Disable the Picture menu in OSD.

Sound Lock: Disable the Sound menu in OSD.

Feature Lock: Disable the Feature menu in OSD.

Setup Lock: Disable the Setup menu in OSD.

Key Lock: Disable the buttons on the TV set.

Source Lock: Disable the input source you desired.

Set Source: Select the default source when you turn on the TV.

Channel Number: Select the default channel number when you turn on the TV.

Max Volume: Set the Max volume for the TV.

Default Volume: Set the default volume when the program is on.

Clear Lock: Clear all the locks above, it means set all the locks to OFF and max volume to 100.

Database Export: Export all Hotel Settings to the USB device.

Database Import: Import all Hotel Settings from the USB device.

Language: Lets you select from language options available.

Clock: Allows you to set the clock (the default information is taken automatically from the digital TV signal).

Sleep Timer: Lets you set the sleep timer so the television automatically switches off after a certain amount of time.

Auto Power Off: The TV will switch itself off automatically if no change in status within the time you select. Select from; 1hr, 2hr, 4hr or off.

Hearing Impaired: Switches on the hearing impaired feature for additional information and subtitles if available.

Menu Settings

19UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Recorder: Select On for this event to be a Record setting (Off denotes a Remind setting) Type: Select the type of the program you want to remind/record (eg: DTV). Channel: Select the channel you want to remind/record. Start Time: Setup the start time for reminder/recording to start. Duration: Setup the duration time for recording (Recorder setting must be On). Date: Select the date for the reminder/recording. Mode: Select the mode for the reminder/recording.

Record File Format Select Record File Format mode from TS and PS for storing to a USB device. TS is the default setting. If you are not familiar with TS and PS formats (which are not related to record quality but refer to content storage) then leave the setting as is.

Partition Select

Timeshift Buffer Set Timeshift Buffer mode: auto, 30Mins, 1hr, 2hr.

Remind/Record Schedule Enter the Remind/Record Schedule menu to program when to change and /or record a channel by timer. Press the YELLOW button to add a new remind/record event.

Format: Press RED button to format the selected USB device.

Set Default Partition: Press the GREEN button to set the selected partition as the default partition. Recordings are stored in the default partition. It needs to be reset if the default partition becomes full in during recording.

PVR/Timeshift: Setup menu for recording, please see the Recording Operation section.

Menu Settings

20UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Record List Display the Record list menu.

Delete: Press RED button to delete the selected record plan.

Recorder Start Press OK button to start recording, performs the same function as REC on the remote control.

Menu Settings

21UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Setup menu

Description

OSD Timer: Lets you adjust the amount of time the On Screen Display Menu stays on the screen before disappearing.

PC Setup: Change the PC Settings in PC mode.

Auto Adjust: Setup the parameter of the screen automatically.

H/V-Position: Adjust the transverse/ vertical position of the screen.

Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained.

Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.

Blue Screen: Changes the background when there is no input between clear and a blue background (only available for for some Input sources).

Reset TV Setting: This clears all the TV settings for the television.

Software Upgrade: From time to time new firmware may be released to improve the running of the television (available for download). This menu lets you upgrade that software onto the television. Further details of how to do this will be issued with the firmware. See the customer support page on the website; www.uniden.co.nz or www. uniden.com.au.

DVD Operation

22UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

NOTE

The DVD insert/eject operation is only available when INPUT is set to DVD. DO NOT attempt to insert a DVD disc when the TV is not powered on and INPUT set to DVD. Damage to the DVD unit may result if a DVD disc is forcefully inserted when DVD unit is not powered.

Selecting DVD Mode (INPUT) Press the Power button on the TV or the remote control. Press INPUT on the TV or the remote control and select DVD.

If there is no disc in the DVD player the screen will show NO DISC.

Inserting a DVD Disc Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot with the reflective side facing the front. The player will automatically draw the disc into the player.

To Eject the disc, press EJECT on the TV or the

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1 2 3

4 5 6

7 8 9

0

DIS PLAY EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECTChange the screen display mode.

NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.

Return to the previous channel viewed. FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels. VOL+ /- : Adjust the volume.

REC.LIST: Record List. REC : Press to start recording inDTV mode. NICAM/A2: TV Nicam/A2 select. DISPLAY: Press to display the current modes information. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU: System setup menu. EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode. D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

5

Remote Control

button on the remote control.

Playing a DVD The DVD plays automatically when inserted or INPUT is changed to DVD or TV is powered on in DVD mode. Use the DVD controls as indicated on page 7 to navigate DVD content.

Reflective side facing front of TV

DVD Setup Mode

23UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

In DVD mode press D.SET (Red button) to bring up the DVD Setup Screen. Use the navigation keys and OK to select an option to review. Press D.SET (Red button) to exit from the DVD Setup Screen

NOTE

If a DVD is playing then some settings in the Setup Mode will not be available for review. Press Stop (button) 2 times to stop the DVD disc and the full settings will be available. The full settings are also available when there is no disc.

General Setup Page TV Display

4:3 Pan Scan This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically.

4:3 Letter Box This is selected when the player is connected to a normal TV. Wide-screen images are shown on the screen, with black bars on the top and bottom.

Wide (16:9) Default. Select when the player is connected to a wide-screen TV.

OSD Language Use to select the OSD (On Screen Display) language

Screen Saver When set On, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. Used to prolong screens life.

Last Memory When set On, the current settings at shutdown will be stored and applied at the next startup, including continuing Disc play at the last position. When set Off, the DVD mode will automatically start with default settings.

Audio Setup Page Speaker Setup Use to select LT/RT for left and right channel or Stereo.

Dolby Digital Setup Dynamic Use to adjust compression ratio to control volume contrast.

DVD Setup Mode

24UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Preference Page

NOTE Available only when DVD disc is stopped or no disc in tray.

TV Type Select from PAL, Multi or NTSC (default PAL TV system).

Audio If the language selected is recorded on the disc, you can play sounds for that language. If not, the language recorded will be used.

Subtitle If the language selected is recorded on the disc, you can set the Subtitle to display in that language. If not, the language recorded will be used.

Disc Menu If the language selected is recorded on the disc, you can set the Menu to display in that language. If not, the language recorded will be used.

Parental When playing a disc with parental lock function, select an Age Control Grade according to grade of disc and your own preference. E.g. If PG is selected, DVD Video disc rated higher than PG grade cannot be played.

Password Change password required for Age Control Grade and Parental Lock function.

NOTE Default password is 123456

Default Load the original factory settings. Select RESET and press OK.

Viewing Multimedia Content from a USB Drive

25UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

An optional external USB Drive can be connected to view multimedia content.

Basic Operation 1. Select Media as the INPUT source.

2. Select the media type from; Photo, Music, Movie or eBook.

3). Press / to select the USB device and press OK to enter the file list.

Viewing Multimedia Content from a USB Drive

26UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

1. Photo

2. Music

Press / to select the option on the table, and press OK to change. Note: Press OK to display the option table when it disappears.

: Play/Pause the photo playing. : Stop and exit the full screen program.

: Play the previous or next file directly. : Rotate the picture (0, 90, 180, 270). : Zoom in/out the picture, you could move the picture by Cursor left/right/up/down

button in Zoom mode. : Display the information of the current file. : Display the photo setup menu, and select the Repeat mode, Background Music,

Slide Time, Effect. : Display the playing list.

Press / to select the option on the table, and press OK to change. : Play/Pause the music playing.

: Stop and exit the music playing. : Play fast backward or forward.

: Play the previous or next file directly. : Input the time and start playing directly. : Select the repeat mode for playing music. : Switch the window between Information and Playlist. : Switch off the screen display (BLUE button as quick button).

Viewing Multimedia Content from a USB Drive

27UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

3. Movie

Press / to select the option on the table, and press OK to change. Note: Press OK to display the option table when it disappears.

: Play/Pause the movie playing. : Stop and exit the full screen program.

: Play fast backward or forward. : Play the movie in slow mode.

: Play the movie in step mode. : Set the A-B repeat playing mode.

: Play the previous or next file directly. : Display the playing list. : Display the information of the current file. : Display the movie setup menu, and setup the Program, Subtitle, Audio, Repeat

mode. : Goto mode, Input the time and start playing directly.

4. eBook

Press / to select the option on the table, and press OK to change. Note: Press OK to display the option table when it disappears.

: Turn to previous/next page of the text. RED button: Add or delete the bookmark. GREEN button: Goto the appoint page. YELLOW button: Display the bookmark list. BLUE button: Display the playlist.

Troubleshooting

28UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Do not use other functions that are not mentioned in this owners manual. In case a problem occurs with your TV, please take the following steps first. If you still have the problem, turn the power off and visit the customer support page

of our website listed on the front cover.

Problem Action The screen does not appear.

Is the power plug pulled out? Insert the power plug. Press the power button of the remote control.

The screen appears too slowly after the power is turned on.

This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. But if the screen does not come after 1 minute visit the customer support page of our website listed on the front cover.

Screen is too bright or too dark.

Perform brightness adjustment or Contrast adjustment.

Screen is too large or too small.

Adjust the screen size using the ASPECT key on the remote control.

Stripes appear on the screen and it shakes.

Stop using wireless telephones, hair driers and electric drills in close proximity to the TV.

The screen does not move.

Press the PAUSE button. Check if the Pause button is pressed on external equipment.

Screen appears, Voice is not heard

1. Press the MUTE button. 2. Increase the sound level by pressing volume adjustment button. 3. Check if sound terminal of external input is connected properly. 4. Check if audio cables are connected properly. 5. Select and check the other input. If the sound still does not work and the other channels are the same after you have done as the above, visit the customer support page of our website listed on the front cover.

Remote control does not work

1. Check if main power is On. 2. Check that the batteries of the remote controller were loaded properly. 3. Check to see if any obstacle exists between the TV and the remote control, then remove it, if any. 4. If the batteries have no power, replace them with two new batteries.

Specifications

29UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

TL16-DV TL19-DV TL22-DV

Screen Size (diagonal)

Resolution (max):

Aspect Ratio:

Brightness (cd/m):

Contrast Ratio:

Main Power (DC):

Power consumption (max):

Power consumption (standby):

Operating Temp:

Audio Output:

15.6 (40cm)

1366 x 768

16:9

220cd/m

500:1

12V; 3A

36W

<0.5W

0-40C

2 x 3W

18.5 (47cm)

1366 x 768

16:9

220cd/m

1000:1

12V; 3A

36W

<0.5W

0-40C

2 x 3W

21.5 (55cm)

1920 x 1080

16:9

220cd/m

1000:1

12V; 3A

36W

<0.5W

0-40C

2 x 3W

Inputs: RF (75 Coaxial)

USB x 1

HDMI x 1

PC Input (VGA + PC Audio)

Component Video (YPBPR)

Composite Video (RCA)

Audio In (for YPBPR and RCA)

Outputs: COAX

Earphone

Unit Weight:

Unit Dimension

(with stand) (W/H/D mm):

Unit Dimension

(without stand) (W/H/D mm):

1.4kg

373 x 276 x 126

373 x 227 x 40

3.3kg

447 x 320 x 126

447 x 270 x 40

3.6kg

513 x 347 x 160

513 x 308 x 40

Trademark Information

HDMI and the HDMI interface are trademarks or registered trademarks of HDMI Licensing LLC. DVB-T are registered trademarks of the DVB project. Freeview name is owned by Freeview Limited. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

30UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Warranty

31UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (Uniden Aust) or Uniden New Zealand Limited (Uniden NZ) as the case may be. Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser only that the TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo (the Product), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. Warranty period: This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of the original retail sale. If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be: (A) Damaged or not maintained in a reasonable manner or as recommended in the relevant Uniden Owners Manual; (B) Modified, altered or used as part of any conversion kits, subassemblies or any configurations not sold by Uniden Aust or Uniden NZ; (C) Improperly installed contrary to instructions contained in the relevant Owners Manual (D) Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or malfunction covered by this warranty; or (E) Used in conjunction with any equipment, parts or a system not manufactured by Uniden. Parts Covered: This warranty covers the Product and included accessories. User-generated Data: This warranty does not cover any claimed loss of or damage to user-generated data (including but without limitation phone numbers, addresses and images) that may be stored on your Product. Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Products failure to comply with the warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded. Procedure for obtaining warranty service: Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service. UNIDEN AUSTRALIA PTY LTD Service Division 345 Princes Highway, Rockdale, NSW 2216 Phone: 1300 366 895 Email: custservice@uniden.com.au

UNIDEN NEW ZEALAND LTD Service Division 150 Harris Road, East Tamaki Auckland 2013 Phone: (09) 273 8377 Email: service@uniden.co.nz

2013 Uniden Australia Pty Limited. Uniden New

Manualsnet FAQs

If you want to find out how the TL19-DV Uniden works, you can view and download the Uniden TL19-DV TV Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Uniden TL19-DV as well as other Uniden manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Uniden TL19-DV. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Uniden TL19-DV TV Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Uniden TL19-DV TV Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Uniden TL19-DV TV Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Uniden TL19-DV TV Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Uniden TL19-DV TV Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.