- Manuals
- Brands
- Uniden
- Transceiver
- XTRAK
- Owner's Manual
Uniden XTRAK 50 Series Transceiver Owner's Manual PDF
Summary of Content for Uniden XTRAK 50 Series Transceiver Owner's Manual PDF
9090
50 Series UHF CB HANDHELD
TRANSCEIVER
For more exciting new products please visit our website: Australia: uniden.com.au
XTRAK 50_50PRO OM_r7.1.indd 1 11/06/2021 07:12:38
WATERPROOF: IP67 Unidens XTRAK 50 / XTRAK 50 PRO radio is designed to meet the water & dust ingress standard of IP67.
This Means: Beingdefinedasabletowithstandwatersplashesfromanydirection. TheXTRAK50/XTRAK50PROwillonlymeetthisratingiffully assembledandallknobs,coversandfittingsarewellmaintainedand correctlyfitted.Thismeansthattheaccessorycoverisfullyclosed, andthebatterypackandantennaareattachedandsecurelyfastened.
Note: Radio does not retain its IP67 rating when an accessory Earpiece or Speaker MIC is connected.
LITHIUM ION BATTERY PACK WARNING ThisequipmentcontainsaLithiumIonBatteryPack. TheLithiumIonBatteryPackcontainedinthisequipmentmay explodeifdisposedofinafire. Donotshort-circuittheBatteryPack. DonotchargetheLithiumIonBatteryPackusedinthisequipmentin anychargerotherthantheonedesignedtochargethisBatteryPack. UsinganotherchargermaydamagetheBatteryPackorcausethe BatteryPacktoexplode. LithiumIonbatteriesmustbedisposedofproperly.
NOTE
USER LICENSE INFORMATION ThecitizenbandradioserviceislicencedinAustraliaby ACMARadio-communications(CitizenBandRadio Stations)ClassLicenceandinNewZealandbyMBIE GeneralUserLicenceforCitizenBandRadioand operationissubjecttoconditionscontainedinthose licenses.
2
Warning
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
XTRAK 50_50PRO OM_r7.1.indd 2 11/06/2021 07:12:38
Introduction | Features 4 Included in your Package 5 Controls and Indicators 6 Getting Started AttachingtheAntenna/Beltclip/BatteryPack 8-9 ConnecttheDrop-inChargerwithACAdaptor 10 ChargingtheBatteryPack 10 BatteryLevelDisplay&AutomaticBatterySave 11 AccessoryJack(SPKR/MIC)Cover 11 Operation MENU 12 PowerOn/Off|Volume 13 SelectingaChannel 13 Squelch 14 HowtoTransmitandReceive|High/LowTransmitPower 15 SMARTKeyOperaton 16 InstantChannelFunction(PriorityChannel) 16 CallFunction|CallTone(SelectingaCallTone)17 EQL(Equaliser-VoiceEnhanceSetting)18 MonitorMode18 Pairing (XTRAK 50 PRO Only) 18 UsingaRepeaterChannel|ToOperateinDuplexMode 19-20 Scanning 21 WhatisOpenScan(OS)/GroupScan(GS)Mode? 21 Add/RemoveChannelsfromSCANMemory 22 ToStartChannelSCAN 22 PriorityWatchforGroupScan 23 CTCSS / DCS 24 BCL(BusyChannelLockout) 25 Scramble(VoiceScramble) 25 VOX(VoiceActivatedTransmit) 26 RogerBeep 26 KeyBeep 26 DisplayDimmer 27 KeyLock 27 LEDTorch/S.O.SStrobe 27 Operation | Special Features InstantREPLAY(ReceiverRecord&Playback) 28-29 MASTERSCAN(Uninterruptedtransmit&receive) 29-31 BluetoothApp(XTRAK 50 PRO Only) 31-32 BluetoothAudio(XTRAK 50 PRO Only) 32 CTCSS & DCS Codes and Frequencies 33-34 UHF-CB Channel Guidelines, Channels & Frequencies 35-37 Warranty 38
3
Contents
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
XTRAK 50_50PRO OM_r7.1.indd 3 11/06/2021 07:12:38
4
Introduction
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
TheXTRAK50/XTRAK50PROisanIP67waterproof,portabletwo-way UHF-CBradio.ThishandheldUHF-CBradioisdesignedtogiveconsistent, outstandingperformanceinmanyconditionsandsituations.Toensurethat yougetthemostfromtheXTRAK50features,pleasereadthisoperating guidecarefullybeforeusingtheunit.
FEATURES UHF-CB80ChannelNarrow BandTransceiverRadio1 1W/5WTransmitPower WaterprooftoIP672
2WSpeaker Duplex(Repeater)Mode 10DifferentCallTones VOXFunction RogerBeepFunction AccessoryJack RechargeableLithium-lonBattery LowBatteryAlert BatteryStrengthIndicator LEDTorch/SOS AutoBatterySave
Channel (CH) Features MasterScan(foruninterrrupted
Transmit&Recieve) ChannelSelect InstantCHProgramme/Recall GroupScanw/PriorityCHWatch OpenScan ScanCHMemory BusyCHLock-outFunction 50CTCSS(ContinuousTone
CodedSquelchSystem)codes 104DCS(DigitalCodedSquelch)
codes
Special Features InstantReplay (ReceiveRecord&Playback) One-TouchSmartKey VoiceEnhancer(EQL) 5VoiceScrambleSettings BluetoothApp3forLocation
Tracking,SettingsControl& SoftwareUpgrades
BluetoothAudio3toconnect withoptionalBTearpiece
Control Features NegativeOLEDDisplay DisplayDimmercontrol SignalStrength/PowerMeter VolumeControlknob 5LevelPresetSquelch KeyBeepon/off KeypadLock
Refer to page 35 - page 37 for channel information
2 Radio meets waterproof (IP67) specifications only when battery, antenna and Accy jack cap are correctly fitted.
3 XTRAK 50 PRO only.
Note: Features and specifications are subject to continual improvement & change.
XTRAK 50_50PRO OM_r7.1.indd 4 11/06/2021 07:12:39
NOTE: If any of these items are missing from the box, contact your place of purchase immediately.
Optional Accessories SpeakerMic EarpieceMic
VisittheXTRAK50/XTRAK50PROpageonthewebsiteformore informationontheavailability&rangeofoptionalaccessories; www.uniden.com.au
5
Included in your Package
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Items XTRAK 50 / 50 PRO
XTRAK 50 PRO DLX
XTRAK 50-2TP
XTRAK 50 UHF Radio 1 1 2
LithiumBattery(2700mAh) 1 1 2
Antenna 1 1 2
BeltClip 1 1 2
BeltClip(SwivelType) - 1 -
Drop-InCharger 1(single) 1(single) 1(twin)
ACAdaptor 1 1 1
Cig-LeadAdaptor 1 - -
Cig-LeadCharger(Kit) - 1 1
SpeakerMic 1 1 2
EarpieceMic 1 1 2
Mag. Mount Antenna - 1 1
Hang-upBracket&Clip - 1 -
HardCarryCase - - 1
OwnersManual 1 1 1
XTRAK 50_50PRO OM_r7.1.indd 5 11/06/2021 07:12:39
6
Controls and Indicators
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
1
2
5
6
7
3
4
13
11
8 9
14
15
12
16 17 18
1 Antenna 2 BeltClip 3 Battery 4 BatteryReleaseLatch 5 [PTT] (PushtoTalk)Key 6 [R]InstantReplayKey 7 [S]ProgrammableSMARTkey Defaultfunction:InstantChannel -Presstousecurrentfunction -Press&holdtochangefunction 8 Torch/S.O.SStrobeLED 9 [TORCH /S.O.S] Presstotoggle: TorchON>S.O.S>TorchOFF [KEY LOCK] Press&holdtolock/unlock 10 Transmit(Red)/Receive(Green) LEDIndicator 11 Speaker
10
12 OLEDDisplay 13 [ON/OFF VOL]RotaryKnob - Power On/Off -VolumeControl 14 AccessoryJack&Cover 15 Microphone 16 [MENU] - PresstoopenMenuorselect Menuoption -Press&holdinMenumodeto saveandexit / [MEM]Scanmemorykey -Press&holdinstandbymode 17 [ ] Channel/MenulistUP [ ] Channel/MenulistDOWN 18 [SCAN] SCANkey / [OS/GS/MS] Scanmode OpenScan/GroupScan/ MasterScan
XTRAK 50_50PRO OM_r7.1.indd 6 11/06/2021 07:12:39
7
Controls and Indicators
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
A S:INSTSmartKeyStatus INST>CALL>EQL> MON>PAIR*>INST... B HI / LOTXPowerLevel C SignalStrengthMeter D VOXVoiceActivatedTransmission is On E DUPChannelisinDuplexmode F SquelchLevelIndicator G INST CH is the Instant CH H SCRVoiceScrambleisOn I Transceiverstatus TX - Transmitting CALL-SendingCallTone VOX-Voiceactivation RX-ReceivingaSignal MON - Monitor mode J Replaystatus -ReplayRec.isON -ReplayRec.isOFF REPLAY-Playbackison
E
K
P
R Q
L M N
J
H G
I
K Bluetoothstatus* L -KeyLockisOn M BatteryLevelIndicator N PRI-PriorityWatchfor GroupScanisOn O MEM -CHisinScanMemory P Scanmode O.S-OpenScan G.S-GroupScan M.S-MasterScan SCAN-Flashesduringscan Q SubCodeType DCS / CTCSS R SubCodeNo. S EQL status (apearsduringRXonly) T UHFCBChannel
*XTRAK 50 PRO Only
D
F
A
B
C
T
O
S
XTRAK 50_50PRO OM_r7.1.indd 7 11/06/2021 07:12:39
8
Getting Started
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Attaching the Antenna TheXTRAK50comeswithaprecisiontuned 477MHzantennaforUHF-CBuse.
AttachtheantennatotheXTRAK50. Besuretheantennaisfirmlyseated.
Attaching the Beltclip The belt clip attaches to the battery pack and may be pre-installed for convenience on some model packages.
To attach the belt clip: 1.Slidethebeltclipintothecatchatthetop ofthebatteryuntilitsnapsintoplace.
To remove the belt clip: 1.Pinchandholdthebeltcliplatchandthen slidethebeltclipupandoutofthecatch. (Beltclipcanberemovedfromthebattery evenwheninstalledintheradio.)
XTRAK 50_50PRO OM_r7.1.indd 8 11/06/2021 07:12:39
9
Getting Started
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Attaching the Battery Pack 1.Installthebatterypackintotheback oftheradiomakingsurethetabsat thetopofthebatteryslideinfirst.
2.Presstogetherthebottomofthe batterypackandtheradio,andthen closethebatterylatchuntilitlocks thebatteryinplace.
CAUTION
AvoidexposingtheLithiumIonbattery,attachedor unattachedtotheradio,indirectsunshine,heatedcars,or inareaswithtemperaturesbelow20C(4F)orabove +60C(+140F). Exposingthechemicalscontainedwithinthebatterypackto temperaturesabove+60C(+140F)maycausethebattery torupture,failorreduceperformance. Incaseofexposuretocellcontents,washtheaffectedarea thoroughly,andseekmedicalattention. Additionalbatterycautionsshouldbeappliedasdescribed onpage2.
XTRAK 50_50PRO OM_r7.1.indd 9 11/06/2021 07:12:39
10
Getting Started
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Connect the Drop-in Charger with AC Adaptor
PlugoneendoftheACadapterintoa240VACwalloutletandtheother endintothedrop-incharger.
Ifyouusethedrop-inchargerinamobilevehiclewith12VDCpower, usetheoptionalcig-leadadaptor.
ThechargersLEDlightonlyindicateswhenaradioorbatteryisinstalled &charging. Charging the Battery Pack YourradioispoweredbyaspeciallydesignedLithiumIonbatterypack.
BeforeoperatingtheXTRAK50,chargetheLithiumIonbatterypack for4hourswithoutinterruptioninthedrop-incharger.
NOTE
Fortheinitialbatterycharge,makesuretheradioisofffor optimumcharging.
1.PlacetheXTRAK50inthedrop-incharger.
2.Iftheradiobatteryischarging,theLED illuminatesredandstaysreduntilfully charged,thenitilluminatesgreen.
Thechargerwontoverchargethebatterypack. Whenchargingiscompleted,thechargeLED changescolourfromredtogreen.
YoucanmonitorincomingcallswhiletheXTRAK50 isinthedrop-incharger.
Do not transmit when the XTRAK 50 is in the drop-in charger!
XTRAK 50_50PRO OM_r7.1.indd 10 11/06/2021 07:12:39
11UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Getting Started
Battery Level Display
LEVEL5 Battery100%full
LEVEL4 Batteryapprox.75%capacity
LEVEL3 Batteryapprox.50%capacity
LEVEL2 Batteryapprox.25%capacity
LEVEL1 Batterylow
NOTE
Rechargethebatteryatanytime.Fromempty,thebattery willtakeupto4hourstofullycharge.
Batterylife,basedonbelowdutycyclewithminimumsettings(Dimmer low,Bluetoothoff(XTRAK 50 PRO only),Replayoff): -upto30Hoursat1Wandupto20Hoursat5W
DutyCycle: Transmit5% Receive5% Stand-by90%
Automatic Battery Save TheAutomaticBatterySavefeatureextendsthebatterylifebyswitching topowersavemodeifitremainsoutofoperationfor5seconds.This featureautomaticallyactivatesduringstandbymode(RXmodewithout asignal).
Accessory Jack (SPKR/MIC) Cover MakesuretheAccessoryjackcoverisfirmlypushedintomaintain waterproofrating.ReleasetheAccessoryjackcovertopluginan optionalSpeakerMICorEarpieceMIC.
UH755 Battery Levels
XTRAK 50_50PRO OM_r7.1.indd 11 11/06/2021 07:12:39
12
Operation | MENU
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
SeetheControlsandIndicatorsonpage6ofthisoperatingguidefor controlknobandkeyoperations. Inadditiontothekeyandcontrolknobfunctions,manyfeaturesare availableintheMenu.
To use the MENU: 1. Press[MENU] andthenpress[ ] or [ ]tohighlightamenuoption. 2. Press [MENU] toselecttheoption. 3.Press[ ] or [ ]tohighlightasettingoption. 4. Press&hold[MENU] to store the setting and exit menu mode.
01TXPower 02Squelch 03CTCSS/DCS 04Scramble 05Duplex 06PriorityWatch 07 Pri/Inst CH 08GSMem.Preset 09M.ScanCode
10VOX 11BCL 12CallTone 13RogerBeep 14KeyBeep 15Replay(RXRec.) 16Dimmer 17BluetoothApp* 18BluetoothAudio*
MENU Order List
* XTRAK 50 PRO only EachMENUfunctionisdescribedintheirrespectiveoperations.
XTRAK 50_50PRO OM_r7.1.indd 12 11/06/2021 07:12:39
Power On/Off
To turn the unit ON,rotatethe[ON/OFF VOL]clockwise.Afterthestart upscreendisplays,achannelnumberandbatterylevelshouldappear onthedisplay.
To turn the unit OFF,rotatethe[ON/OFF VOL] knobcounter-clockwise.Thedisplaywillturnoff.
Volume
Rotate the [ON/OFF VOL]knobclockwiseorcounter-clockwisetoadjust speakervolumetoadesiredlisteninglevel.
Selecting a Channel
Press [ ] or [ ] toselect thedesiredchannel.
NOTE
Foryourreferencealistoftheavailablechannels, correspondingfrequenciesandguidelinesfortheiruseand selectionisprintedonpage37.ForAustralia,Channels05 and35arereservedforEmergencyCalls.
13UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
XTRAK 50_50PRO OM_r7.1.indd 13 11/06/2021 07:12:39
14UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
Squelch Thesquelchisusedtoeliminatetheannoyingbackgroundnoisewhen thereisnosignalpresentonachannel.Thesquelchcircuitdoesthisby controllingwhentheradiosspeakerturnson,basedonthestrengthof receivedsignals.
NOTE
Makesuretofirstselectachannelnotinusebeforesetting thesquelchinyourXTRAKradio.
TheAutoSquelchfeaturehas0-5presetsquelchlevels: Itrequiresnoadjustmentonceset.
0-Monitormode(opensquelch):Fullyopentonoise&signals. 1-maxsensitivity(minsquelch):Weak(distant)signalscanopenthesquelch. 3-medsensitivity(medsquelch):Mediumandstrongsignalscanopenthesquelch. 5-minsensitivity(max/tightsquelch):Strong/nearbysignalscanopenthesquelch.
To set the Squelch level: 1.Press[MENU]. Press [ ] or [ ]until 02 Squelchishighlighted. 2. Press [MENU]toselect. 3.Press[ ] or [ ]toselectthedesired squelchlevel. 4.Press&hold[MENU]tosavethesettingandexitmenumode.
NOTE
Ifanincomingsignalisveryweakthereisapossibilitythat youwillhaveachoppyorbrokenreception,duetothe sensitivityofthesquelch.Inthiscase,adjustthesquelch levelaccordingly.
10
SQUELCH The squelch is used to eliminate any annoying background noise when there
are no signals present.
Think of squelch as a gate. Turn [SQ] fully
clockwise. This raises the "Squelch Gate" so high
that only the very strong signals can get through.
Turn [SQ] fully coun er clockwis until you hear a
hiss. This opens the "Squelch Gate" so that
everything gets through noise, weak signal, and
strong signals.
To set the "Squelch Gate" to the desired level, turn
[SQ] counter-clockwise until you hear noise. Then
turn the [SQ] clockwise just until the noise
stopped. Now only the desired signal can get
through.
If an incoming signal is very weak there is a
possibility that you will have a choppy or broken
reception, due to the sensitivity of the squelch.
In this case, simply rotate the [SQ] clockwise
until the weak signal is heard clearly.
Noise
Weak Signals
Medium Signals
Strong Signals
Make sure to first select a channel not in use before setting the
squelch in your UH076SX UHF-CB radio.
UH076SX
XTRAK 50_50PRO OM_r7.1.indd 14 11/06/2021 07:12:40
15
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
To Transmit and Receive TheXTRAKusestheUHF-CBChannels.Foryourreferencealistofthe availablechannelsandcorrespondingfrequenciesisprintedonpage35- page37.
ThemaximumRFtransmitpoweroftheXTRAKis5Watts.
To switch between 5 Watts (Hi) and 1 Watt (Lo) power: 1.Press[MENU]. 01 TX Power isthefirstoption. 2. Press [MENU]again.Thesettingdisplaysatthecurrentlevel. 3.Press[ ] or [ ]toselectapowerlevelsetting. 4.Press&hold [MENU] to store the setting and exit menu mode.
To Transmit and Receive:
1.Beforeyoutransmit,listenforactivityontheselectedchannel.
2.Whenthechannelisclear,pressandholdthe[PTT] to transmit. While[PTT]ispressedthetransmit/receiveLEDlightsupredandthe TX icondisplays.
Holdtheradiowithmicrophoneapproximatelyfivecmsinfrontof yourmouthwiththeantennaatapproximately45angleawayfrom yourhead.Speakinaclear,normalconversationalvoice.
3.Whenyouhavefinishedspeaking,releasethe[PTT]andlistenfora response.Thetransmit/receivedLEDturnsoffandtheTX icon disappearsfromthedisplay.
Whenatransmissionisbeingreceivedbyyourradiothetransmit/ receiveLEDlightsupgreenandtheRXiconandcurrentEQLlevelicon displays.
XTRAK 50_50PRO OM_r7.1.indd 15 11/06/2021 07:12:40
16
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
SMART Key Operation
TheSMARTkey[S],canbe programmed(set)tooperateone oftheseone-touchfunctions.
INST-InstantChannelrecall(default) CALL-CallTonetransmit EQL -Equaliserlevelincrement/cycle MON - Monitor mode on/off PAIR - Pair (XTRAK 50 PRO only)
1.Press&holdthe[S]keytosetthenextfunction. Theiconforthefunctionwilldisplay.
2. Press [S]tousethecurrentfunction.
Instant Channel Function (Priority Channel) TheInstantChannelFunctionallowsaone-touchtogglebetweena prioritychannelandthecurrentchannel.
To use Instant Channel: BydefaulttheSMART[S]keyissettotheInstantChannelfunction.
WhentheSMARTkeyissettoINST;
1.Press[S]togotothestoredInstantchannel. ThedefaultchannelistheemergencyCH05. TheInstantchannelisalwaysindicatedbytheINST icon. 2. Press [S]againtoreturntothepreviouschannel.
XTRAK 50_50PRO OM_r7.1.indd 16 11/06/2021 07:12:40
17UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
To store a new channel as the Instant Channel: 1.Press[MENU]. Press [ ] or [ ]until07 Pri/Inst CHishighlighted. 2. Press [MENU]again.ThesettingdisplaysatthecurrentInstantCH. 3.Press[ ] or [ ]toselectadesiredchanneltoset. 4.Press&hold [MENU] to store the setting and exit menu mode.
Call Function TheCallfunctiontransmitsashortwakeuptonetonotifyotherusersof impendingcommunication.Youmayselectfrom10typesoftones.
To use the Call function: BeforeyouuseCall,makesurethechannelisnotinuse.
WhentheSMARTkeyissettoCALL; 1.Press[S]andtheCallTonewillbetransmitted.
NOTE
Currentregulationsrequirecallingtonestoberestrictedto onetransmissionperminute.Ifasecondtransmissionis attemptedwithinoneminutethenanerrortonewillsound.
Selecting a Call Tone Selectfrom10callingtonestousewiththeCallTonefunction.
To change the Call Tone pattern: 1.Press[MENU]. Press [ ] or [ ]until12 Call Toneishighlighted. 2. Press [MENU]again.Thesettingdisplaysatthecurrenttonepattern. 3.Press[ ] or [ ]toselectadesiredtonepattern. 4.Press&hold [MENU] to store the setting and exit menu mode.
XTRAK 50_50PRO OM_r7.1.indd 17 11/06/2021 07:12:40
18
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
EQL (Equaliser - Voice Enhance Setting)
Choosefrom4differentreceiveaudiolevelsettingstoprovideanatural VoiceEnhanceforclarityandperformance.
WhentheSMARTkeyisprogrammedtoEQL; 1.Press[S]toincrement/cyclethesettingbetweenthe4levels;
EQL 0: Normal-StandardorFLAT. EQL 1: Bass-Enhancedlowfrequencies,soundqualitybecomes mildandeasytolistento,notcausingfatigue. EQL 2: Midrange-Enhancedmidrangefrequencies,soundquality becomesclear. EQL 3: High-Enhancedthehighfrequencied,soundquality becomessharp.
NOTE
Whenasignalisreceived,exceptforwheninMonitor mode,thecurrentEQLlevelwilldisplay.
Monitor Mode
WhentheSMARTkeyisprogrammedtoMON; 1.Press[S] to turn Monitor mode On or Off.
MonitormodeisalsoenteredwhentheSQLlevelissettoSq0.
Pairing (XTRAK 50 PRO Only)
XTRAK50PROonly-SeeBluetoothAudiopage32.
XTRAK 50_50PRO OM_r7.1.indd 18 11/06/2021 07:12:40
19UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
Using a Repeater Channel UHF-CBRepeatersareusedtoretransmitorrelayyoursignal. Repeaterswillextendtherangeofyourradioandovercomethe shieldingeffectcausedbysolidobstructions.
InnormalSimplexoperation,yourradiotransmitsononeparticular frequencyandreceivesonthatsamefrequency.Ifthereisabarrier(i.e. aTallBuilding)thatpartiallyblocksyourtransmittedsignal,thepossibility oftheotherradioreceivingthesignalisveryslim.Valleys,metallic structures,etc.,tendtoactasascreenbetweenradios.
StandardOperationwithouttheaidofaRepeaterStation
OperationwiththeaidofaRepeater
WithDuplexoperation,thesignalcomingfromyourradioisreceived bytheRepeaterstationandthenre-transmittedatthesametimeon anotherchannel.
Forexample: 1.CH01isonDuplexMode-willreceiveonCH01butTransmitonCH31 2.CH41isonDuplexMode-willreceiveonCH41butTransmitonCH71, etc...RefertoUHF-CBChannel&Frequenciestableonp.35-p.37.
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, and the repeater station down-converts your signal and retransmits on CH01.
XTRAK 50_50PRO OM_r7.1.indd 19 11/06/2021 07:12:40
20UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
To Operate in Duplex Mode (using a Repeater) Onlychannels01-08and41-48areavailableforDuplex.
1.Press[MENU]. Press [ ] or [ ]until05 Duplexishighlighted. 2. Press [MENU]toselect. 3.Press[ ] or [ ]toturnDuplexmodeOnorOff. 4.Press&hold[MENU]tosavethesettingandexitmenumode.
DUPiconappearsbesidethechannel whenDuplexsettingisenabledfora duplexcapablechannel.
NOTE
SearchonlineforavailableUHF-CBrepeaters inyourarea. Checklocalrepeateravailabilityusingthe XTRAKApp(XTRAK 50 PRO only).
XTRAK 50_50PRO OM_r7.1.indd 20 11/06/2021 07:12:40
21
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Scanning Thescanfeatureallowsyoutosearchforactivechannelsautomatically. YoucanonlyscanchannelsthatarestoredintheScanmemory. TheXTRAK50hastwoScanmodes(twogroupsofScanmemory); OpenScan(OS)mode, GroupScan(GS)mode. IndicatedbytheO.S or G.Sicononthedisplay.Achannelisstoredin thescanmemoryofthecurrentscanmodewhentheMEMiconappears besidethechannelnumber.
NOTE
BydefaulttheXTRAKissettoOSscanmodewithall UHF-CBchannelsstoredintotheOSchannelmemory. TheGSscanmemorybydefaultisempty-awaitinguser customisation.
YoucanchangeorcustomizethechannelsstoredinOSor GSscanmomorybyfollowingthestepsonAdd/Remove Channels from SCAN Memory onpage22.
What is Open Scan (OS) Mode? OSscansallmemory(MEM)channelsintheOSscanmemory.Ifan activechannelisfound,scanningwillpauseonthatchannelwhilethere isasignal.
What is Group Scan (GS) Mode? AllowsyoutomonitortheInstantChannel(asaPriorityChannel)while scanningtheGSmemory(MEM)channels.
See To store a new channel as the Instant Channel,page17forhowto setthePrioritychannel.
NOTE
IfGSScanningisinitiatedwhentherearenochannels programmedinGSscanmemory,anerrortonewillbe heardandscanningwillnotstart.
XTRAK 50_50PRO OM_r7.1.indd 21 11/06/2021 07:12:40
22UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
Add/Remove Channels from SCAN memory 1.SelectwhichScanningModeyouwishtouse. Press&holdthe[OS/GS/MS] keytochangeOSorGSMode. O.S or G.Siconappearsonthedisplay.
2. Press [ ] or [ ]toselectthechannelyouwanttostore.
3.Press&hold[MEM]for1.5secs.tostore. MEMiconappearsandashorttonebeepisheard.
4.ToremovethechannelsfromMemory: Press&hold[MEM]for1.5secondsoncemore. TwoshorttonebeepsareheardandtheMEMicondisappears.
To Start Channel SCAN
1.Press[SCAN] andtheradiowillbeginscanningthechannelsthatare intheOSorGSmemory-dependingonwhichoftheseiscurrently active.SCANiconflashesduringscanning.
Scan Direction SCANwillbeginscanningforactivechannelsinasequentialorder. Youcanchangethescandirection(increasingordecreasingchannel number)bypressing[ ] or [ ].
Drop-out delay WhenSCANfindsabusychannelitpausesscantoreceivethe signal.Whenthereceivedsignalstops,theradiowaitsfor3seconds forthereturnofthesignal,otherwise,theradioresumesscanning.
Recent Active Channels SCANremembersrecentactivechannelsandmonitorsthesechannels foractivitywhilescanningthroughthescanmemory.Thismeansif recentlyactivechannelsbecomeactiveagainduringSCAN,theradio willpauseonthesechannelsfirst.Thismakesscanningforactive channelsmoreefficient(faster)thelongerSCANisoperating.
XTRAK 50_50PRO OM_r7.1.indd 22 11/06/2021 07:12:40
23
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Skipping an Active Channel Whenpausedonanactivechannelitisnotpossibletoskipthischannel astherecentactivechannelfeaturewillcausescantolockbackonto thatactivechannel.Waitfortheactivechanneltobecomeinactiveand SCANwillresume.Ifyouwanttoavoidanactivechannelcompletely, deactivateSCANandremovethechannelfromthescanmemory,then reactivateSCAN.
Priority Channel in GS Mode InGSmodeifSCANispausedonanactivechannelthatisnotthe PriorityChannel,andthePriorityChannelbecomesactive,theradiowill switchtothePriorityChannelforaslongasthereisasignal.
2.TodeactivateSCAN,press[SCAN] or [MENU].
NOTE
IfSCANisdeactivatedwhileitistunedtoanactivechannel, theXTRAKwillstayonthatactivechannel.
IfSCANisdeactivatedwhilein-betweenactivechannels, theXTRAKwillreinstatethelastactivechannel.
IfSCANisdeactivatedwhennoactivechannelhasbeen found,theXTRAKwillreinstatethestartingchannel.
Priority Watch for Group Scan
ToswitchPriorityWatchOn/Off; 1.Press[MENU]andthenpress[ ] or [ ]until06 Priority Watch is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]tohighlightOnorOff. 4.Press&hold[MENU] to store the setting.
XTRAK 50_50PRO OM_r7.1.indd 23 11/06/2021 07:12:40
24UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
CTCSS / DCS
CTCSS (Continuous Tone Coded Squelch System) TheCTCSSsquelchcodesallowsagrouptotalktoeachotherwithout hearingotherusersonthesamechannel.Thegroupneedstousethe samecode.Andasthereare50CTCSScodesavailablethechancesof nearbyusersusingthesamecodeisunlikely.
DCS (Digital Coded Squelch) DCSisadigitalversionofCTCSS.Itprovides104extra,digitallycoded squelchcodesthatfollowafterthe50CTCSScodes.Followthesteps forchangingCTCSScodebutselectaDCScodeasdesired.
To use CTCSS or DCS:
1.Press[MENU]andthenpress[ ] or [ ]until03 CTCSS / DCS is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectaCTCSSorDCScode. Thereare50CTCSScodesavailable. Thereare104DCScodesavailable ToturnoffCTCSS/DCS,selectOFF. 4.Press&hold[MENU] to store the setting and exit menu mode.
CTCSS or DCSicon,andthecodenumberappearswhenacodeis selectedforachannel.
NOTE
Channels5and35areusedforemergencychannels. CTCSS/DCSwillnotoperateonthesechannels.
XTRAK 50_50PRO OM_r7.1.indd 24 11/06/2021 07:12:40
25
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
BCL (Busy Channel Lock-out) Thisfeaturepreventsaccidentaltransmissiononabusychannel. ThisisrecommendedonchannelswhereCTCSSorDCSisbeingused. Ifyouhearsoundfromthespeaker,theBCLfeaturewillpreventyou from transmitting.
To activate BCL:
1.Press[MENU]andthenpress[ ] or [ ]until11 BCLishighlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectOnorOff. 4.Press&hold[MENU] to store the setting and exit menu mode.
Scramble (Voice Scramble) Thescramblefeatureisavoiceinversionfunctionthatprovides additionalprivacywithyourcommunication.
Fivescramblefrequenciesareavailabletochoosefrom; 3300 Hz, 2952 Hz, 3039 Hz, 3200 Hz, 3400 Hz.
Makesureotherradiosyouarecommunicatingwithareusingthesame scramblefrequency.
1.Press[MENU]andthenpress[ ] or [ ]until04 Scramble is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectadesiredscramblefrequency. 4.Press&hold[MENU] to store the setting and exit menu mode.
SCRicondisplayswhenScrambleisenabled.
NOTE
Scramblecannotbeenabledonchannels05&35 (emergencychannels)andchannel11(roadchannel).
XTRAK 50_50PRO OM_r7.1.indd 25 11/06/2021 07:12:40
26UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation
VOX (Voice Activated Transmit) VOXisVoiceactivatedtransmission,nopressingofthePTTkey. Foroptimumperformance,useVOXwhentheaccessoryearpieceis connected.WhenVOXisturnedon(levels1-5)theearpiecemicrophone is mostsensitiveatlevel1,andleastsensitiveatlevel5.
To use VOX: 1.Press[MENU]andthenpress[ ] or [ ]until10 VOXishighlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectadesiredVOXlevel. 4.Press&hold[MENU] to store the setting and exit menu mode.
VOXiconappearsonthedisplaywhenaVOXsettingisenabled. VOX iconalsoappearsintheTransceiverstatuswhenVOXinitiatesa transmission.
Roger Beep RogerBeepautomaticallyaddsasign-offtonetotheendof transmissions.
1.Press[MENU]andthenpress[ ] or [ ]until13 Roger Beep is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectOnorOff. 4.Press&hold[MENU] to store the setting and exit menu mode.
Key Beep
KeyBeepisthetonethatsoundsafterakeypress.
1.Press[MENU]andthenpress[ ] or [ ]until14 Key Beep is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectOnorOff. 4.Press&hold[MENU] to store the setting and exit menu mode.
XTRAK 50_50PRO OM_r7.1.indd 26 11/06/2021 07:12:40
27
Operation
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Display Dimmer
To change the display dimmer level: 1.Press[MENU]andthenpress[ ] or [ ]until16 Dimmer is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectadesiredlevel. 4.Press&hold[MENU] to store the setting and exit menu mode.
NOTE
Changingthedimmerlevelwillaffectthebatteryoperating time(seeBattery Level Display,page11).Foroptimum batteryoperatingtime,settolow.
______________
Key Lock Topreventaccidentalentries,youcanlockthekeypad.Only[PTT] and [ON/OFF VOL]areaccessiblewhenKeyLockisactivated.
Press&hold[KEY LOCK]untilitbeepstoactivateordeactivateKey Lock. iconappearsatthetopofthedisplaywhenactivated.
LED Torch / S.O.S Press [KEY LOCK]totoggletheLEDtorchbetweentheseoptions; TorchON>S.O.Sstrobe>TorchOFF
NOTE
TorchandS.O.SareonlyavailablewhenXTRAKis poweredon.
XTRAK 50_50PRO OM_r7.1.indd 27 11/06/2021 07:12:40
28UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Operation | Special Features
Instant REPLAY (Receiver Record & Playback) TheInstantReplayfeatureautomaticallyrecordsupto4minutesof receivedsignalswhichcanbeinstantlyreplayed(throughthespeaker) bypressing[R].
Whenon,InstantReplayautomaticallyrecordsreceivesignalsinthe normalchannelmodeandSCANmode.
Press [R] atanytimeto; 1. Playbackthemostrecentreceivedsignalor, 2. Playbackthemostrecentrecordedsignalinthereplaybuffer(ifInstant ReplayautomaticreceiverecordwasturnedOff,seeTurningInstant ReplayOn/Offbelow).
DuringplaybackthedisplayshowsREPLAYandthenumberofthe currentlyplayingrecording.Afterthemostrecentreceivedsignalhasbeen playedback,alongconfirmationtonesoundsandtheradioreturnstothe previousmode.
Duringplaybackolderrecordingscanbeaccessedbypressing[ ] or [ ] toskipforward/backbetweenrecordingsstoredwithinthebuffer. Therecordnumberindicateswhichdiscreterecordingiscurrentlybeing replayed.
NOTE
Receivedsignalsshorterthan500msarenotrecorded. Automaticrecordingofreceivesignal(s)istemporarily suspendedduringInstantReplayplayback. Olderrecordingsareautomaticallyoverwrittenwhennew recordingsarestored. Mostreceivedcommunicationsareshortandtherecord buffermaycontainseveralrecordings. InstantReplaydoesnotrecordwheninmonitormode (Sq0settinginnormalchannelmode). Transmissions(TX)arenotrecorded.
XTRAK 50_50PRO OM_r7.1.indd 28 11/06/2021 07:12:41
29
Operation | Special Features
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Turning Instant Replay On/Off
InstantReplayisONbydefault.The icondisplaystoindicate InstantReplayautomaticrecordisOn. icondisplayswhenInstant ReplayisOff.
1.Press[MENU]andthenpress[ ] or [ ]until15 Replay (RX Rec.) is highlighted. 2. Press [MENU]toselecttheoption. 3.Press[ ] or [ ]toselectOnorOff. 4.Press&hold[MENU] to store the setting and exit menu mode.
MASTER SCAN (Uninterrupted Transmit & Receive)
MasterScanisaTransmit&Receivemode,usingscan,thatwillallow continualcomunicationacrosscongestedchannels.
UseMasterScanwithotherradiosthatarealsosetuptothesameMas- terScansettings.MasterScanwillnotworkonitsownorifitssettings aredifferentfromotherradiosusingMasterScan.
ThetwosettingsallradiosinyourMasterScannetworkmustshareare; -ScanningthesamesetofchannelsfromGroupScan(GS)memory -UsingthesameCTCSS/DCScode
Foryourconvenience,bydefault; -Channels09-20arestoredintoGSMemoryand -CTCSS01issetastheMasterScansubcode.
Byscanningonlygroupchannelsforthegroupsubcode,radiosinthe networkwillbeabletodetectandreceivegrouptransmissions-con- tinualcommunicationwithoutinterruption. Whentransmittinginthismode,theradioswitchestoanunusedgroup channelifitdetectsanothersignalwithnoCTCSS/DCScode,orthe wrongcode,onthechannellastusedbythegroup.Inthisway,allgroup userswillbeabletohavecontinualcommunicationwithintheirgroup.
XTRAK 50_50PRO OM_r7.1.indd 29 11/06/2021 07:12:41
30
Operation | Special Features
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Setting up Master Scan Mode
First, Setect a G.S Memory Preset to use as the Master Scan chan- nel group.
P-NoChangeMasterScanwiththecurrentGroupScan(GS)memory. P1:MasterScanwithCH09-20loadedintoGSmemory. P2:MasterScanwithCH21-30,39,40loadedintoGSmemory. P3:MasterScanwithCH49-60loadedintoGSmemory. P4:MasterScanwithCH61-70,79,80inGSmemory.
1.Press[MENU] and then press[ ] or [ ]until 08 GS Mem. Preset ishighlighted. 2. Press [MENU] toselect. 3.Press[ ] or [ ] tochangethesettingtoaMasterScanoption. 4.Pressandhold[MENU]tosave&exitfromthemenumode.
NOTE
ThePresets(1-4)makeiteasierforallradiostoselecta commonsetting.IfyouchoosetouseMASTERSCANwith thecurrentGSchannelmemory(P-NoChange),youneed tomakesureallotherradiosinyournetworkhavethesame channelsstoredinGSmemory.Toadd/removechannels fromG.SSCANMemory,refertopage22.
NOTE
RXonlyChannels(CH22,CH23,CH61,CH62andCH63) andEmergencyChannels(CH05,CH35)willnotbe includedinMasterScanModeeventhoughstoredintoGS Memory.AlsochannelsforwhichDuplexSettingisOnwill beskippedinMasterScanMode.
Second, Select a Master Scan subcode 1.Press[MENU]andthenpress[ ] or [ ]until09 M.Scan Code is highlighted. 2. Press [MENU] toselect. 3.Press [ ] or [ ] toselectaCTCSSorDCScode. 4.Pressandhold[MENU]tosave&exitfromthemenumode.
XTRAK 50_50PRO OM_r7.1.indd 30 11/06/2021 07:12:41
31
Operation | Special Features
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Using Master Scan OnceMasterScanhasbeensetupforyourradioandotherradiosin yournetwork,simplypress[SCAN] toenableordisableM.SCAN.The SCANiconflashesinthismode.
WhenSCANisenabledforMasterScan,simplyusetheradio(Transmit andReceive)asyouwouldnormally.UsingMasterScanshouldfeellike usinganormalsinglechannel.
Bluetooth APP (XTRAK 50 PRO Only)
Throughthebuilt-inBluetoothfeaturetheXTRAK50PROworkswiththe freeXTRAKApp,availableontheAppleStoreforiOSsmartphonesand thePlayStoreforAndroidsmartphones.SearchfortheXTRAKAppby Uniden.Userinstructionsfortheappareembeddedintheapp.
InstallingXTRAKApponyoursmartphoneandconnectingyoursmart- phonetoyourradiooverbluetoothallowsyoutoshareyourlocation, evenwithoutmobilephoneservice.Inaddition,itoffersrecordingtracks andcontrollingtheradiosettingsfromtheconvenienceofyoursmart- phone.
Theinstructionsbelowareonlyabriefintroductionasallinstructionsare providedwithintheXTRAKApp.
TurntheBluetoothAppsettingOnwhenyouarereadytoconnectwitha compatiblesmartphonerunningtheXTRAKApp.
NOTE
TheBluetoothwordmarkandlogosareregisteredtrade- marksownedbyBluetoothSIG,Inc.andanyuseofsuch marksbyUnidenisunderlicense.Othertrademarksand tradenamesarethoseoftheirrespectiveowners.Apple andtheApplelogoaretrademarksforAppleInc.,registered intheU.S.andothercountries.AppStoreisaservicemark ofAppleInc.Android,GooglePlay,andtheGooglePlay logoaretrademarksofGoogleInc.
XTRAK 50_50PRO OM_r7.1.indd 31 11/06/2021 07:12:41
32
Operation | Special Features
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Bluetooth APP (XTRAK 50 PRO Only) - Continued
1.Press[MENU],thenuse [ ] or [ ] tohighlight17 Bluetooth App. 2. Press [MENU] toselect. 3.Press [ ] or [ ] toselectOnorOff. 4. Pressandhold[MENU]tosave&exitfromthemenumode. The1stBluetoothsignaliconwillflashindicatingawaitingpairing/ connectionwithacompatiblesmartphonerunningtheXTRAKApp,and willstaysteadyafterparing/connection.
Bluetooth AUDIO (XTRAK 50 PRO Only)
UsethissettingtoconnecttheXTRAK50PROtocompatibleBluetooth devicesforaudiooutput(compatibleBluetoothearpiece).
BeforeturningtheBluetoothAudiosettingOn,firstsetthe[S]Smartkey to PAIR - see SMART Key Operationpage16.
EnableBluetoothAudio 1.Press[MENU],thenuse[ ] or [ ]tohighlight18 Bluetooth Audio. 2. Press [MENU] toselect. 3.Press[ ] or [ ] toselectOnorOff. 4.Pressandhold[MENU] tosave&exitfromthemenumode. The2ndBluetoothsignaliconwillflashindicatingawaitingpairingor connection,andwillstaysteadyafterparing/connection.
Pair/ConnecttoaCompatibleBluetoothaudiodevice. 1.Onthecompatiblebluetoothaudiodevice,initiatepairing. 2. Press [S](SMARTkeymustbesettoPAIR).
NOTE CompatiblewithBluetooth5.0devices.
XTRAK 50_50PRO OM_r7.1.indd 32 11/06/2021 07:12:41
33
CTCSS Codes and Frequencies
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Code No. Frequency (Hz) Code No. Frequency (Hz)
oF OFF 26 162.2
1 67.0 27 167.9
2 71.9 28 173.8
3 74.4 29 179.9
4 77.0 30 186.2
5 79.7 31 192.8
6 82.5 32 203.5
7 85.4 33 210.7
8 88.5 34 218.1
9 91.5 35 225.7
10 94.8 36 233.6
11 97.4 37 241.8
12 100.0 38 250.3
13 103.5 39 69.4
14 107.2 40 159.8
15 110.9 41 165.5
16 114.8 42 171.3
17 118.8 43 177.3
18 123.0 44 183.5
19 127.3 45 189.9
20 131.8 46 196.6
21 136.5 47 199.5
22 141.3 48 206.5
23 146.2 49 229.1
24 151.4 50 254.1
25 156.7
XTRAK 50_50PRO OM_r7.1.indd 33 11/06/2021 07:12:41
34UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
DCS Codes and Frequencies
Code No. DCS Code (Octal) Code No. DCS Code
(Octal) Code No. DCS Code (Octal)
1 023 36 223 71 445 2 025 37 225 72 446 3 026 38 226 73 452 4 031 39 243 74 454 5 032 40 244 75 455 6 036 41 245 76 462 7 043 42 246 77 464 8 047 43 251 78 465 9 051 44 252 79 466 10 053 45 255 80 503 11 054 46 261 81 506 12 065 47 263 82 516 13 071 48 265 83 523 14 072 49 266 84 526 15 073 50 271 85 532 16 074 51 274 86 546 17 114 52 306 87 565 18 115 53 311 88 606 19 116 54 315 89 612 20 122 55 325 90 624 21 125 56 331 91 627 22 131 57 332 92 631 23 132 58 343 93 632 24 134 59 346 94 654 25 143 60 351 95 662 26 145 61 356 96 664 27 152 62 364 97 703 28 155 63 365 98 712 29 156 64 371 99 723 30 162 65 411 100 731 31 165 66 412 101 732 32 172 67 413 102 734 33 174 68 423 103 743 34 205 69 431 104 754 35 212 70 432
XTRAK 50_50PRO OM_r7.1.indd 34 11/06/2021 07:12:41
35
UHF-CB Channel Guidelines
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
NOTE
Alwayslistenonachannel(orobservethereceivesignallevel meter)toensureitisnotalreadybeingusedbeforetransmitting. Channels5and35areusedforemergencychannels. CTCSSwillnotoperateonthesechannels. PleasefollowtheseguidelinesforchanneluseinAustralia: Channels05and35areEmergencyChannels. Channel11isaCallingChannel. Channels22and23arefortelemetryandtelecommand applicationsandTXisinhibitedonthesechannels. Generalcommunicationisacceptedonallotherchannels withtheseguidelines: Channel40-roadchannel(Australia). Channels01-08(and31-38),andChannels41-48 (and71-78)arerepeaterchannels.
NOTE
Important information - 80 Channel UHF-CB channel expansion ToprovideallusersadditionalchannelcapacitywithintheUHF-CB Band.TheACMAwillchangethemajorityofthecurrentwideband40 channelusetonarrowbandchanneluse.Thisallowsforadditional channelstobeadded,upto80Channels. Thissimplymeansthatthenewnarrowbandradioyouhavepurchased willhavemorechannelsthanolderradios.Pleaserefertotheguidelines aboveandthechannelchartforfurtherchannelinformation. Alistofcurrentlyauthorisedchannelscanalsobeobtainedfromthe ACMAwebsiteinAustraliaandtheMEDwebsiteinNewZealand. Interference / Poor Audio Whenanewnarrowbandradioreceivesasignalfromanolder widebandradiothespeechmaysoundloud. NarrowbandradiosoperatingonCH41-CH80mayencounter interferencefromanearbywidebandradiostransmittingonhigh poweronanadjacentchannel(frequency). Whenanolderwidebandradioreceivesasignalfromanew narrowbandradiothespeechmaysoundquiet-thewidebandradio usersimplyadjuststheirradiovolumeforbestperformance. Theabovesituationsarenotafaultoftheradiobutasymptomofmixed widebandandnarrowbandradiosincurrentuse.Itisexpectedthatas olderwidebandradiosarephasedoutthisissuewillbeeliminated.
XTRAK 50_50PRO OM_r7.1.indd 35 11/06/2021 07:12:41
36UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
UHF-CB Channels and Frequencies
CH No.
Simplex Mode Transmit / Receive
Frequency (MHz)
Duplex Mode Transmit
Frequency (MHz)
CH No.
Simplex Mode Transmit / Receive
Frequency (MHz)
1 476.425 477.175(CH31) 21 476.925
2 476.450 477.200(CH32) 22 476.950(RXonly)
3 476.475 477.225(CH33) 23 476.975(RXonly)
4 476.500 477.250(CH34) 24 477.000
5 476.525 477.275(CH35) 25 477.025
6 476.550 477.300(CH36) 26 477.050
7 476.575 477.325(CH37) 27 477.075
8 476.600 477.350(CH38) 28 477.100
9 476.625 29 477.125
10 476.650 30 477.150
11 476.675 31 477.175
12 476.700 32 477.200
13 476.725 33 477.225
14 476.750 34 477.250
15 476.775 35 477.275
16 476.800 36 477.300
17 476.825 37 477.325
18 476.850 38 477.350
19 476.875 39 477.375
20 476.900 40 477.400
XTRAK 50_50PRO OM_r7.1.indd 36 11/06/2021 07:12:41
37
UHF-CB Channels and Frequencies
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
CH No.
Simplex Mode Transmit / Receive
Frequency (MHz)
Duplex Mode Transmit
Frequency (MHz)
CH No.
Simplex Mode Transmit / Receive
Frequency (MHz)
41 476.4375 477.1875(CH71) 61 476.9375(RXonly)
42 476.4625 477.2125(CH72) 62 476.9625(RXonly)
43 476.4875 477.2375(CH73) 63 476.9875(RXonly)
44 476.5125 477.2625(CH74) 64 477.0125
45 476.5375 477.2875(CH75) 65 477.0375
46 476.5625 477.3125(CH76) 66 477.0625
47 476.5875 477.3375(CH77) 67 477.0875
48 476.6125 477.3625(CH78) 68 477.1125
49 476.6375 69 477.1375
50 476.6625 70 477.1625
51 476.6875 71 477.1875
52 476.7125 72 477.2125
53 476.7375 73 477.2375
54 476.7625 74 477.2625
55 476.7875 75 477.2875
56 476.8125 76 477.3125
57 476.8375 77 477.3375
58 476.8625 78 477.3625
59 476.8875 79 477.3875
60 476.9125 80 477.4125
XTRAK 50_50PRO OM_r7.1.indd 37 11/06/2021 07:12:41
38
Warranty
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
UNIDEN XTRAK 50, XTRAK 50 PRO Series UHF CB Transceiver
IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service
PleaserefertoourUnidenwebsiteforanydetailsorwarrantydurationsoffered inadditiontothosecontainedbelow.
Warrantor:ThewarrantorisUnidenAustraliaPtyLimitedABN58001865498 (Uniden).
Terms of Warranty: UnidenAustwarrantstotheoriginalretailpurchaser onlythattheXTRAK50Series,orXTRAK50PROSeries(theProduct), willbefreefromdefectsinmaterialsandcraftsmanshipforthedurationofthe warrantyperiod,subjecttothelimitationsandexclusionssetoutbelow.
Warranty period: Thiswarrantytotheoriginalretailpurchaserisonlyvalidin theoriginalcountryofpurchaseforaProductfirstpurchasedeitherinAustralia orNewZealand.
Ifawarrantyclaimismade,thiswarrantywillnotapplyiftheProductisfound byUnidentobe:
(A) Damagedornotmaintainedinareasonablemannerorasrecommended intherelevantUnidenOwnersManual; (B) Modified,alteredorusedaspartofanyconversionkits,subassembliesor anyconfigurationsnotsoldbyUniden; (C) Improperlyinstalledcontrarytoinstructionscontainedintherelevant OwnersManual (D) RepairedbysomeoneotherthananauthorizedUnidenRepairAgent inrelationtoadefectormalfunctioncoveredbythiswarranty;or (E) Usedinconjunctionwithanyequipment,partsorasystemnot manufacturedbyUniden.
Parts Covered:ThiswarrantycoverstheProductandincludedaccessories.
Product 3Years
BatteryPack& Accessories
1Year
XTRAK 50_50PRO OM_r7.1.indd 38 11/06/2021 07:12:41
39
Warranty
UNIDEN XTRAK 50 Series HandheldUHF-CBTransceiver
Statement of Remedy: IftheProductisfoundnottoconformtothiswarranty asstatedabove,theWarrantor,atitsdiscretion,willeitherrepairthedefector replacetheProductwithoutanychargeforpartsorservice.Thiswarrantydoes notincludeanyreimbursementorpaymentofanyconsequentialdamages claimedtoarisefromaProductsfailuretocomplywiththewarranty.
OurgoodscomewithguaranteesthatcannotbeexcludedundertheAustralian ConsumerLaw.Youareentitledtoareplacementorrefundforamajorfailure andforcompensationforanyotherreasonablyforeseeablelossordamage. Youarealsoentitledtohavethegoodsrepairedorreplacedifthegoodsfailto beofacceptablequalityandthefailuredoesnotamounttoamajorfailure.
Thiswarrantyisinadditiontoandsitsalongsideyourrightsundereitherthe COMPETITIONANDCONSUMERACT2010(Australia)ortheCONSUMER GUARANTEESACT(NewZealand)asthecasemaybe,noneofwhichcanbe excluded.
Procedure for obtaining warranty service: Dependingonthecountryin whichtheProductwasfirstpurchased,ifyoubelievethatyourProductdoes notconformwiththiswarranty,youshoulddelivertheProduct,togetherwith satisfactoryevidenceofyouroriginalpurchase(suchasalegiblecopyofthe salesdocket)toUniden.PleaserefertotheUnidenwebsiteforaddressdetails. YoushouldcontactUnidenregardinganycompensationthatmaybepayable foryourexpensesincurredinmakingawarrantyclaim.Priortodelivery,we recommendthatyoumakeabackupcopyofanyphonenumbers,imagesor otherdatastoredonyourProduct,incaseitislostordamagedduringwarranty service.
UNIDEN AUSTRALIA PTY LTD Phone:1300366895 Email:custservice@uniden.com.au
User-generated Data: Thiswarrantydoesnotcoveranyclaimedlossof ordamagetouser-generateddata(includingbutwithoutlimitationphone numbers,addressesandimages)thatmaybestoredonyourProduct.
XTRAK 50_50PRO OM_r7.1.indd 39 11/06/2021 07:12:41
2021UnidenAustraliaPtyLimited.PrintedinPRC
XTRAK 50_50PRO OM_r7.1.i
Related manuals for Uniden XTRAK 50 Series Transceiver Owner's Manual
Manualsnet FAQs
If you want to find out how the XTRAK Uniden works, you can view and download the Uniden XTRAK 50 Series Transceiver Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Uniden XTRAK as well as other Uniden manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Uniden XTRAK. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Uniden XTRAK 50 Series Transceiver Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Uniden XTRAK 50 Series Transceiver Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Uniden XTRAK 50 Series Transceiver Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Uniden XTRAK 50 Series Transceiver Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Uniden XTRAK 50 Series Transceiver Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.