Uniden iGO CAM 325 Recorder Owner's Manual PDF

1 of 20
1 of 20

Summary of Content for Uniden iGO CAM 325 Recorder Owner's Manual PDF

iGO CAM 325 Accident CAM

Vehicle Recorder

For more exciting new products please visit our website: Australia: www.uniden.com.au

2UNIDEN iGO CAM 325 Vehicle Recorder

Important Safety Instructions

NOTE

Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture.

NOTE

This product is intended for use in a motor vehicle. Dont install the device where it will block the drivers view of the road (including the mirrors!) or the deployment of the airbag.

NOTE

Keep your attention on the road! Dont try to operate or focus on any device while driving. If you have to concentrate on a device, pull off the road for a few minutes.

NOTE

Ensure that the camera lens is kept clean and there is nothing blocking the lens.

NOTE

Dont leave the device in direct sunlight for a long period of time or where the temperature could go above 60C.

3UNIDEN iGO CAM 325 Vehicle Recorder

CONTENTS Important Safety Instructions .......................................2

What Do I Do First? ........................................................ 4 Make Sure These Items Arrived in the Box ................................................4

Controls & Indicators .....................................................5

How Do I Put It in My Car? .............................................7 Attaching the Windshield Mount ..................................................................7

Operation ........................................................................ 8 Micro SD Card .......................................................................................................8

Plug it in, Power On/Off ...................................................................................9

Record Mode ...................................................................................................... 10

Photo Mode ....................................................................................................... 12

Playback Mode ...................................................................................................13

Connecting to a PC .........................................................................................13

Settings Menu ...................................................................................................14

Important Information ....................................................................................15

Warranty ........................................................................16

4UNIDEN iGO CAM 325 Vehicle Recorder

Make Sure These Items Arrived in the Box

What Do I Do First?

DC (CAR) Adaptor USB Cable

Windshield Mount

If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products!

Need help? Get answers at our website: www.uniden.com.au for Australian model.

iGO CAM 325

Owners Manual

Controls & Indicators

UNIDEN iGO CAM 325 5 Vehicle Recorder

4 3

2 1

5

6

7

8

10

9

14

13

11

12

15

16

15

17

6 Vehicle RecorderUNIDEN iGO CAM 325

Ref Component Description

1 UP In Menu list, move the cursor, one line up.

2 LED RED - Indicates charging

3 MENU In standby, open the Menu.

4 LED BLUE - (Glow) Standby (Flashing) recording

5 DOWN In Menu list, move the cursor, one line down Turn on/off the audio recording.

6 OK In the Record mode, press this button to start/stop video recording.

Use this button to capture an image in the Photo mode.

Help confirm a menu selection. Confirm changes in the settings.

7 M/ While recording, press to lock/save (from overwrite) the current recording.

Use this button to shift between the Record, Photo and Playback mode.

8 POWER Press to turn power on. Press & hold to turn power off. During power on, press to turn Infrared LEDs (night

vision) on/off.

9 LCD

10 USB Port Connect External Power & charge battery Connect to PC for data (SD card) transfer

11 Card Slot micro SD Card Slot

12 Lens

13 Bracket Slot Fit the bracket hook of the windshield mount

14 MIC Records sound.

15 Reset If the device fails to operate, try resetting the device. Press the reset button using a fine pen or paperclip.

16 Speaker

17 Infrared LED LED for night vision

7UNIDEN iGO CAM 325 Vehicle Recorder

How Do I Put It in My Car?

Attaching the Windshield Mount 1. Insert the bracket hook into the bracket slot provided on the top of the unit.

2. After inserting the hook, slide it down till it locks in position.

3. Press the suction cup flat against the windshield.

4. Push the suction lock up, until it snaps into place and tighten the locking collar to secure.

5. Gently pull on the mount to make sure it is secure.

NOTE

Suction cups will not stick well on a curved/textured or wet surface.

8UNIDEN iGO CAM 325 Vehicle Recorder

Operation Micro SD Card

NOTE

A compatible micro SD card (not supplied) is required to record and store videos and photos.

The unit can support micro SDHC cards (High Capacity SD) up to 32GB in capacity. A micro SDHC card of at least 4GB capacity and minimum Class 4 speed is recommended.

Insert a formatted micro SD card gently in the slot at the side of the unit. To remove the card from the slot, press the edge of the SD card inwards for it to pop out and then pull it out of the slot.

Uniden recommends using good quality micro SD cards.

Battery Information

Although primarily designed for in-car use, the unit can operate from its built- in battery for up to 10 minutes.

Please note, the power usage would depend on day/night recording and resolution setting.

The unit will charge the battery whenever power is detected through the USB port. When the unit is being charged, the Red LED will glow. It will automatically turn off when the unit has been charged completely. The unit will take about 90 minutes to charge completely.

NOTE

Please ensure that the battery is fully charged before using it for the first time. To extend the battery life, fully charge the unit once every 3 months.

Plug it in, Power On/Off

NOTE

When connected to a car charger with power, the unit will automatically power on and start recording.

1. Connect the DC car adaptor to the power connector (USB port) found on the device.

2. Connect the other end of the DC car adaptor to your cars cigarette lighter.

3. When connected to the car charger the unit will power on automatically and start recording. When the cars engine is turned off, the unit will automatically turn off in a few seconds. At other times, press the Power button to turn it on, or press & hold the Power button to turn it off.

NOTE

Only use the DC car adaptor that comes with your device. Any other adaptor might damage the device.

FullHalf fullLowEmpty

9 Vehicle RecorderUNIDEN iGO CAM 325

Battery Alert

The image given below indicates the battery level at different stages.

10 Vehicle RecorderUNIDEN iGO CAM 325

NOTE

To record a video, ensure that a valid SD card (not supplied) is inserted in the given slot. Also note, that inserting/removing the SD card when the unit is recording causes the device to shutdown.

Recording

When connected to a car charger, the unit automatically goes into the record mode and starts recording. The icon will display on the screen. A flashing red dot next to the icon indicates that the unit is recording. To stop recording, press OK and the red dot disappears, indicating that the recording has stopped. Protect Function to Protect the Current Recording

If you want to protect the current recordings, then press the M/ button, the key icon will appear on the screen. This indicates that those recordings have been locked and will not be overwritten by new video clips.

Record Mode

Menu Settings

NOTE

Please note, you cannot access MENU when the the unit is recording. To access the Menu, you will need to stop recording by pressing OK.

In the record, photo or playback mode, press the MENU button once to access the menu settings for that particular mode. Press twice to display the Settings menu. Press the relevant UP and DOWN keys to scan through the various settings and then press OK to select. Press the MENU button to exit the Menu.

11UNIDEN iGO CAM 325 Vehicle Recorder

Resolution Set the video resolution. The maximum resolution is 1080P.

Loop Recording Use this option to set the time duration for each recording. If you choose the option Off then the recorder will not loop record and the files will not be overwritten on the micro SD card. The duration of these recorded files will be around 10 minutes.

Exposure Set the brightness sensitivity.

Motion Detection Enable this setting to allow the recorder to start recording when it detects movement.

Record Audio Use this setting to turn on/off the audio recording.

Date Stamp Use to display or hide the date and time stamp on the recordings.

G-Sensor This feature detects significant or sudden movement and automatically locks the current recording.

Key Tone Have the keys sound a tone when you press them.

Parking Mode Parking Mode is off by default. You can switch it on to allow G-Sensor to detect strong vibration and start recording for the parked vehicle.

12 Vehicle RecorderUNIDEN iGO CAM 325

Photo Mode

Timer Set the time gap for capturing an image. For example, if you select 2s, then that will be the delay between the OK button being pressed and the image being captured.

Resolution Define the image resolution.

Sequence The camera goes into a continuous shooting mode when this option is activated and you get up to 5 shots in one click.

Quality Use to define the quality of the images you want to capture.

Sharpness Use to define the clarity of detail in the images you want to capture.

White Balance Establish the condition to capture an image, from the options given.

ISO Use this setting, to increase or decrease the sensitivity of the camera towards light.

Exposure Set the brightness sensitivity.

Anti-Shake Activate this to reduce the camera shake and capture a better quality image.

Date Stamp Enable/Disable the date and time on the image files.

Press the MODE button till you see the icon displayed on the top left corner of the screen.

Now, press the OK button to take a photo.

Menu Settings

13UNIDEN iGO CAM 325 Vehicle Recorder

Playback Mode

Press MODE button till you see either of the or icons displayed on the top left corner of the screen.

Press the UP and DOWN keys to scan through the various video/image files.

When in the Playback mode, press the MENU button to get the following options:

Delete Protect

Delete

Select this setting by using the relevant UP/DOWN key and press OK. The following options are displayed on the screen - Delete Current, Delete All. Choose the option, based on whether you want to delete the current file or all the files (both recordings and images) on the SD card.

Protect

Select this setting by using the relevant UP/DOWN key and press OK. The following options are displayed on the screen - Lock Current, Unlock Current, Lock All, Unlock All. Choose the option, based on whether you want to lock/ unlock the files on the SD card, and then press OK.

Connecting to a PC The iGO CAM 325 can be connected to a PC (using the supplied USB cable).

When the unit is connected to the PC, the following options - Mass Storage, PC Camera - are displayed on the units screen.

Select the option Mass Storage to manage and view the SD card contents on the PC. When the unit is detected on the PC as an external drive, select to view the DCIM folder. Click on the DCIM folder to open and view recordings/ images arranged in folders according to the specified date. The locked/ protected recordings have file names beginning with SOS, thus enabling you to easily distinguish them from the rest of the recordings.

In any of the modes (record, photo or playback), press the Menu button twice to open the settings menu.

Settings Menu

Set Date/Time Change the date and time by using the relevant UP and DOWN keys, and then press OK to confirm.

Auto Power Off Set the time duration to automatically power off the unit, when idle.

Language Set the language.

Frequency Under this setting you have the option to choose between 50Hz or 60Hz. Select the relevant option and press OK.

Screen Saver Set the time to automatically turn off the LCD after the recording starts.

Format Use this option to format the SD card

Default Setting Use this option to change all the settings back to the default factory settings.

Version Firmware Version

14 Vehicle RecorderUNIDEN iGO CAM 325

General Problems Possible Solutions

The unit cannot take photos or record videos

The unit automatically stops when recording

Ensure that the SD card is formatted properly and inserted correctly.

Use the recommended type of SD card (minimum 4GB Class 4)

Video is unclear Ensure that there are no fingerprints or dirt on the lens. Ensure that the lens is always kept clean.

Dark images while recording water/sky

Adjust the EV setting.

Colour of the images is not good Set the white balance setting to automatic.

Cross-stripe interference in an image

This is due to the light frequency. Change the light frequency depending on the local power supply.

The unit crashes Press and hold the Reset button, with a pin, to restart the unit.

Important Information

Solving Problems

Listed below are some of the problems and the possible solutions. If you still need help, visit our website, listed on the front cover.

15 Vehicle RecorderUNIDEN iGO CAM 325

16 Vehicle RecorderUNIDEN iGO CAM 325

Warranty

UNIDEN iGO CAM 325

IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service

Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below.

Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (Uniden Aust).

Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the iGO CAM 325 (the Product), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.

Warranty period: This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of the original retail sale.

If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be:

(A) Damaged or not maintained in a reasonable manner or as recommended in the relevant Uniden Owners Manual; (B) Modified, altered or used as part of any conversion kits, subassemblies or any configurations not sold by Uniden Aust; (C) Improperly installed contrary to instructions contained in the relevant Owners Manual (D) Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or malfunction covered by this warranty; or (E) Used in conjunction with any equipment, parts or a system not manufactured by Uniden.

Parts Covered: This warranty covers the Product and included accessories.

User-generated Data: This warranty does not cover any claimed loss of or damage to user-generated data (including but without limitation phone numbers, addresses and images) that may be stored on your Product.

Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Products failure to comply with the warranty.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded.

Procedure for obtaining warranty service: Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the address shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service.

UNIDEN AUSTRALIA PTY LTD Phone: 1300 366 895 Email: custservice@uniden.com.au

17 Vehicle RecorderUNIDEN iGO CAM 325

2018

Manualsnet FAQs

If you want to find out how the iGO CAM 325 Uniden works, you can view and download the Uniden iGO CAM 325 Recorder Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Uniden iGO CAM 325 as well as other Uniden manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Uniden iGO CAM 325. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Uniden iGO CAM 325 Recorder Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Uniden iGO CAM 325 Recorder Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Uniden iGO CAM 325 Recorder Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Uniden iGO CAM 325 Recorder Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Uniden iGO CAM 325 Recorder Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.