Uniden SSE VR1 Receiver Owner's Manual PDF

1 of 20
1 of 20

Summary of Content for Uniden SSE VR1 Receiver Owner's Manual PDF

SSE VR1 Ampli ed Voice Stereo Receiver

For more exciting new products please visit our website: Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

2

The SSE VR1 is an Assistive Listening Device. Please read this Owners Manual in full for details on the installation and operation of the SSE VR1. Basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons.

Some other things to help you make the most of your SSE VR1. This unit is NOT waterproof. Do not immerse the unit in water

or expose it to rain or moisture. Use the charger indicated in this manual. Do not expose the unit to excessive heat, smoke, dust, chemicals

and vibrations. Do not use this unit at the station or construction site. As it may

be difficult to hear the background noise.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT INFORMATION FOR CARE PROvIdERS Unidens Assistive Listening Device (ALD) is an amplification product that is designed and intended to assist persons with a hearing difficulty. As the ALD can generate considerable additional volume, Uniden advises that it should not be used by persons who dont have a hearing difficulty, because such use could result in hearing damage or loss. MEDICAL WARNING The ALD may affect the operation of other medical devices that you wish to use at the same time, including (for example) a pacemaker or hearing aid. Uniden advises that before using the ALD, you should verify with the manufacturer or supplier of any such medical device that you can use it safely in conjunction with the ALD.

3

If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products!

Need help? Get answers at our website: www.uniden.com.au for Australian model www.uniden.co.nz for New Zealand model.

SSE VR1 Earpiece Mic*

Additional Ear Caps

Carry Bag

2x AAA Ni-MH Batteries**

Charger Owners Manual

* The earpiece mic comes with attached ear caps (medium size). ** The SSE VR1 needs only one battery to operate. Keep the spare battery for later use.

WHATS IN THE BOX?

Belt Clip

(Large, Medium, Small, Extra Small)

4

CONTENTS IMPORTANT SAFETY INSTRUCTIONS ................................ 2

IMPORTANT INFORMATION for care providers .................. 2

WHATS IN THE BOX? ............................................................ 3

GETTING TO KNOW THE SSE VR1 .......................................5

GETTING STARTED ............................................................... 7 Battery Installation ............................................................................7

OPERATION ............................................................................ 8 Power On/Off .................................................................................... 8 Adjust Volume ................................................................................... 9 Volume Balance ................................................................................ 9 Attach Belt Clip ............................................................................... 10

MAINTENANCE ......................................................................11

SOLVING PROBLEMS ...........................................................12

GENERAL INFORMATION .................................................... 13 Product Specification .................................................................... 13 Battery Information ......................................................................... 13 Charger .............................................................................................14 Charging the Battery ...................................................................... 15

ONE-YEAR LIMITED WARRANTY ....................................... 16

5

Plug

Microphone

Earpiece Speaker

Earpiece Mic Jack

Volume Knob

Power Switch

Status LED

GETTING TO KNOW THE SSE vR1

Belt Clip Strap holder

Stereo Balance Control

Battery cover

6

Buttons and Indicators

What it does

Status LED Glows green when the SSE VR1 is turned on. For more information, refer to page 8.

Power Switch Slide up to turn ON and slide down to turn OFF the unit.

Volume Knob Rotate the knob to increase or decrease the volume.

Stereo Balance Control

Rotate the knob to balance the volume level between the right/left earpiece speaker.

7

Your SSE VR1 comes with 2 AAA rechargeable batteries to power the unit. The SSE VR1 needs only one battery to operate. Charge the battery completely (about 5 hours) before use (see Charging the Battery, p.15).

Press in on the notch and slide the battery cover off.

Install the battery in the battery compartment ensuring correct polarity. Ensure that the battery is placed over the ribbon.

Battery Installation

When you want to remove the battery, gently pull the ribbon. This will release the battery from the groove.

Align the battery cover over the slots provided and gently push it up. Please ensure that the ribbon stays inside.

GETTING STARTEd

SSE VR1 can also operate with a AAA alkaline battery (not included).

8

Insert the supplied earpiece mic into the earpiece jack.

Put on the earphone (Look out for the R (Right) and L (Left) indication and ensure that you have got it correct).

Slide the Power switch up to power on the unit. The Status LED will glow green indicating that the unit has been powered ON. Slide the Power switch down to turn off the unit after use. The Status LED will turn off as well.

LED What it Indicates Green Power On. Green (Flashing)

Earpiece not connected.

Red (Flashing)

Low Battery

Off Power Off. Battery empty

Power On/Off

OPERATION

9

Adjust volume To adjust the volume on the unit, rotate the volume knob between (0 Min -10 Max).

volume Balance You can use the Stereo Balance Control knob to adjust the volume between the right and left earpiece speaker. To reduce the volume on the left side rotate to L and to reduce the volume on the right side rotate to R.

10

Remove the Belt Clip Rotate the belt clip (as shown in the figure on the right) to release the clip from the slot on back of the unit.

Attach Belt Clip Align the protruding component of the belt clip (highlighted in the figure on the right) with the slot on back of the unit. Then gently press to fit and rotate the clip (as shown in the figure below) to secure position.

11

MAINTENANCE Use a clean dry cloth to clean the unit. Use a clean dry cloth to clean the earpiece mic. Clean the ear caps regularly - take off the ear caps and soak

them in warm water to ensure there are no traces of dirt. Dry them thoroughly before using again.

Never use scouring pads, abrasive cleaning liquids such as petrol or acetone to clean the unit.

12

Problems Possible Solutions Unit wont power-on Change to a charged battery.

Change to a new AAA alkaline (not included)

Check the battery direction. I cant hear Ensure the earpiece-mic is connected

properly. Please use earpiece-mic that comes

with the unit. Adjust the volume.

I can hear only from one side of earpiece speaker mic

Adjust L-R balance. Please read through the Volume

Balance section. Theres a lot of noise and the voice seems distorted.

Clean the ear caps. Please read through the Maintenance

section. Theres a howling sound.

Ensure both earpiece mics are used. Reduce volume. Ensure youve chosen the most suitable

ear cap. Red LED is blinking Ensure the battery is charged.

Change to a new AAA alkaline battery (not included).

Green LED is blinking Ensure earpiece-mic is connected properly.

Ensure you are using the earpiece-mic that came with the unit.

If you have any trouble with your SSE VR1, check this section first. If you need help, visit our website listed on the front cover.

SOLvING PROBLEMS

13

GENERAL INFORMATION

Product Specification Model name SSE VR1 Maximum audio output 110dBSPL Maximum audio gain 40dB Ear speaker type Dynamic Microphone type Electret condenser type Size 39mm (W) x 74.4mm (H) x 14.2mm(D) Weight 25g (not including earpiece-mic,

battery) Operating Time About 28 hours (NiMH)

About 35 hours (Alkaline) Operating Temperature 0C to 40C Storage Temperature -20C to 50C

Battery Information Battery Type NiMH AAA Operation Temperature 0C to 40C Storage Temperature -20C to 50C Capacity 800mAh, 1.2VDC

14

Charger Operation Temperature 0C to 40C Storage Temperature -20C to 50C Input Voltage AC100-240V 50/60Hz Output Voltage 1.4V DC Charging current 220mA +/- 10% LED Indication 2 x Amber Colour LED for two channels ;

two channels operate individually LED Status Power connected but without battery

LED Off

Charging in Progress Slow blinking LED Fully charged and switched to trickle charge

LED On

Bad / Primary battery Fast blinking LED Battery Type/Size 600 series ~ 1000 series

(min. 600mAh) ~ (min. 930mAh) Charging Time (Hours) 3.0 ~5.0

15

Charging the Battery If you opt to use the AAA rechargeable batteries that come with the unit, then you could charge them regularly using the charger that also come with the unit. Install the batteries (ensure the correct polarity) as shown in the image below.

After charging the battery completely (about 5 hours), take it out as illustrated in the image below.

16

IMPORTANT Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (Uniden Aust) or Uniden New Zealand Limited (Uniden NZ) as the case may be. Terms of Warranty Uniden Aust/NZ warrants to the original retail purchaser only that the SSE VR1 (the Product), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. Warranty Period This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of the original retail sale. If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be: (A) Damaged or not maintained in a reasonable manner or as recommended in

the relevant Uniden Owners Manual; (B) Modified, altered or used as part of any conversion kits, subassemblies or any

configurations not sold by Uniden Aust or Uniden NZ; (C) Improperly installed contrary to instructions contained in the relevant Owners

Manual (D) Repaired by someone other than an authorized Uniden Repair Agent in

relation to a defect or malfunction covered by this warranty; or (E) Used in conjunction with any equipment, parts or a system not manufactured

by Uniden. Parts Covered This warranty covers the Product and included accessories.

SSE VR1

ONE-YEAR LIMITEd WARRANTY

17

User-generated Data This warranty does not cover any claimed loss of or damage to user- generated data (including but without limitation phone numbers, addresses and images) that may be stored on your Product.

Statement of Remedy If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Products failure to comply with the warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded. Procedure for Obtaining Warranty Service Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service.

UNIDEN AUSTRALIA PTY LTD Service Division 345 Princes Highway, Rockdale, NSW 2216 Phone number: 1300 366 895 Email: custservice@uniden.com.au

UNIDEN NEW ZEALAND LTD Service Division 150 Harris Road, East Tamaki Auckland 2013 Phone number: (09) 273 8377 Email: service@uniden.co.nz

Manualsnet FAQs

If you want to find out how the SSE VR1 Uniden works, you can view and download the Uniden SSE VR1 Receiver Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Uniden SSE VR1 as well as other Uniden manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Uniden SSE VR1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Uniden SSE VR1 Receiver Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Uniden SSE VR1 Receiver Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Uniden SSE VR1 Receiver Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Uniden SSE VR1 Receiver Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Uniden SSE VR1 Receiver Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.