Uniden App Cam Home Plus Camera Quick Start Guide PDF

1 of 20
1 of 20

Summary of Content for Uniden App Cam Home Plus Camera Quick Start Guide PDF

App Cam Home+

Quick Start Guide

Whats in the Box

Screw Kit x1

Power AdapterApp Cam Home+ x1

Mounting Plate x1

Quick Start Guide x1

Mounting Template x1

x1

Reset Needle x1

1

2

General Introduction

Blue LED Status Blinking: Network connection failed/Network is not configured. On: Camera is starting up/Network connection succeeded.

Built-in Mic

Status LED

Lens

Reset Button Note: Rotate the lens to find the reset button and SD Card Slot Press and hold for more than 5 seconds to restore the device to factory settings

Speaker

Power Port

Light Sensor

Micro SD Card Slot

3

Install Uniden Solo App

Set up the Camera

There are two ways to get the Uniden Solo App: Search Uniden Solo in App Store (for iOS), download and install the app.

Search Uniden Solo in Google Play (for Android), download and install the app.

Please follow the prompt tone to configure the camera

Camera has been started up. Please run app, add the camera and set it up.

1. Please tap the button in the top right corner to add the camera.

4

2. Scan the QR code on the bottom of the camera.

3. Tap Choose WiFi Connection to continue.

Note:

If you prefer network cable connection, tap Choose Network Cable Connection. Please plug in the power cable and the ethernet cable (not included) before ac- cessing the camera and follow the prompts on the screen.

You have the option to set up WiFi connection eventhough you use cable connection. You can skip the WiFi settings by tapping I prefer to use Ethernet cable..

When the setup for the camera has completed, your family can access the camera simply by tapping Have WiFi Configured or Network Cable Connected without reconfiguring it.

5

4. Select I have heard the voice prompt and tap Next to enter the next page.

If you did not hear the voice prompt, please press I didnt hear the voice prompt for help.

5. Enter the Wi-Fi password of the selected Wi-Fi network and tap Next to continue.

6

6. Tap Scan Now to proceed. A QR code will be generated on the phone. Please place the QR code on your phone towards App Cam Solo Pro camera lens at a distance of about 20cm to let the camera scan the QR code. Please make sure that youve ripped the protection film of the cameras lens. Note: To help scanning, please tap the QR code to display in full screen

Scan succeeded. Camera is connecting to the router. Please wait.

7

7. If you hear the above voice prompt, please press I heard Wi-Fi connection failed for help.

Connection to the router failed!

8. If you hear the above voice prompt, please press Select I have heard the voice prompt and tap Next to enter the next page. to finish the quick setup.

Connection to the router succeeded.

8

9. Create a password (at least 6 characters), name the camera and set the DST time. Then start live view or go to Device Settings for more configurations. Note: Name your camera field refers to the display name of the camera rather than the login username.

9

Device Menu

Menu

Add New Device

Device Settings

Access Live View

10

How to Mount the Camera

Step 1 Drilling two screw holes on the wall according to the mounting hole template.

Step 2 Insert the two plastic anchors into the holes on the wall.

Step 3 Secure the base unit in place by tightening the screws into the plastic anchors.

11

Step 4 Align the camera with the bracket, then turn the camera unit clockwise to lock it in position.

NOTE: 1. Turn the camera anticlockwise to remove it from the wall. 2. In case your camera is mounted upside down, the picture will need to be rotated as well. Please go to Device Settings-> Display, then enable Rotation to adjust the image.

For reducing false alarms, please note that:

Do not install the camera facing any objects with bright lights, including sunshine, bright lamplights, etc. Do not place the camera too close to a place where there are frequently moving vehicles. The recommended distance between the camera and the vehicle is 15 meters Do not place the camera in a shaded area and point it towards a well-lit are. Or, it may result in poor image performance. For better image quality, please make sure that the lighting condition for both the camea and the capture object is the same. It is recommended to clean the lens with a soft cloth from time to time. Make sure the power ports are not exposed to water or moisture or blocked by dirt or other elements. Do not install the camera facing the mirror. Do not install the camera where there are strong winds Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones in order to avoid wireless interference.

Important Notes for Reducing False Alarms!

12

Camera is not turning on If your camera is not turning on, please apply the following solutions: Plug the camera to another outlet. Use another 5V pwoer adapter to power up the camera.

Fail to scan the QR code on the phone If the camera failed to scan the QR code on your phone, please apply the following solutions: Remove the protective film on the lens of the camera. Wipe the camera lens with a dry paper/ towel/tissue. Vary the distance (about 30cm) between your camera and the mobile phone which enables the camera to focus better. Tap the QR code screen to enlarge the QR Code.

Wi-Fi connection failed during the initial setup process If the camera fails to connect to Wi-Fi, please apply the following solutions: Please make sure the Wi-Fi band of the Wi-Fi network meet the requirement of the camera. Please ensure you have entered the correct Wi-Fi password. Put your camera close to your router to ensure a strong Wi-Fi signal. Change the encryption method of the Wi-Fi network to WPA2 -PSK/WPA -PSK (safer encryption) on your router interface. Change your Wi-Fi SSID or password and make sure that SSID is within 31 characters and the password is within 64 characters. Set your password using only the characters on the smartphone keyboard.

Troubleshooting

13

Video & Audio

Model App Cam Home Plus

Image Sensor CMOS Image Sensor

Video Resolution 2560 x 1920 (5 Megapixel)

Video Frame Rate up to 20 fps

Video Compression H.264

Zoom 3 x Optical Zoom

Viewing Angle Horizontal: 48~98 Vertical: 37~75

Pan & Tilt Angle Horizontal: 355 Vertical: 50

Night Vision Up to 12 Meters

Audio Two-way talk

Alerts Motion Detection

WiFi WiFi 2.4 GHz/5 GHz

IEEE 802.11a/b/g/n

Wireless Security WPA-PSK/WPA2-PSK

Hardware Power DC 5.0V/1A

Storage Supports up to 64GB micro SD card, min class 10

Other Parameters

Temperature Operating Temperature : -10C~+55C

Size & Weight 80x111mm, 250g

Specifications

14

Uniden App Cam Home+

Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the Uniden App Cam Home+ (the Product), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.

Warranty Period: This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand and will expire, as indicated below, from the date of original retail sale.

Product 1 Year

Accessories 90 Days If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be:

A. Damaged or not maintained in a reasonable manner or as recommended in the relevant Owners Manual;

B. Modified, altered or used as part of any conversion kits, subassemblies or any configurations not sold by Uniden Aust;

C. Improperly installed contrary to instructions contained in the relevant Owners Manual

D. Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or malfunction covered by this warranty; or

E. Used in conjunction with any equipment, parts or a system not manufactured by Uniden.

Important: Satisfactory evidence of the original purchase is required for warranty service. Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below.

Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (Uniden Aust).

WARRANTY

Parts Covered: This warranty covers the Product and included accessories.

User-generated Data: This warranty does not cover any claimed loss of or damage to user-generated data (including but without limitation phone numbers, addresses and images)that may be stored on your Product.

Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Products failure to comply with the warranty.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded.

Procedure for Obtaining Warranty Service: Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service.

UNIDEN AUSTRALIA PTY LTD Phone number: 1300 366 895 Email address: custservice@uniden.com.au

Manualsnet FAQs

If you want to find out how the App Cam Home Plus Uniden works, you can view and download the Uniden App Cam Home Plus Camera Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Uniden App Cam Home Plus as well as other Uniden manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Uniden App Cam Home Plus. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Uniden App Cam Home Plus Camera Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Uniden App Cam Home Plus Camera Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Uniden App Cam Home Plus Camera Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Uniden App Cam Home Plus Camera Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Uniden App Cam Home Plus Camera Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.