Contents

tp-link HS200 V3 User's Manual PDF

1 of 21
1 of 21

Summary of Content for tp-link HS200 V3 User's Manual PDF

Users Manual HS200

1910012304 REV 2.0.1

Smart Wi-Fi Light Switch

Copyright & Trademarks Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.

2017 TP-Link. All rights reserved.

www.tp-link.com

Contents

4 Introduction 5 Product Requirements 5 Smart Wi-Fi Light Switch Installation 7 Using Kasa with Smart Switches

7 Kasa Account 7 Kasa Settings 8 Customizing Smart Switches 9 Scheduling 9 Creating Scenes 11 Away Mode 12 Runtime Summary

13 Maintaining the Smart Switches 13 Firmware Update 14 Resetting

15 Troubleshooting 15 Frequently Asked Questions 16 Usage Tips 16 Support

4www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Introduction TP-Link Smart Wi-Fi Light Switch, also referred to as Smart Switch, is a standard, single-pole, wall light switch that can be controlled via your iOS or Android devices. Along with the TP-Link Kasa mobile app, you can follow an intuitive wiring instructions provided to replace your standard in-wall switch, connect the Smart Switch to your home network, then control your lights and create custom lighting automations from anywhere, at anytime with an Internet connection.

The Smart Switch is compatible with incandescent, LED, Halogen, and compact fluorescent light bulbs. The switch also includes a white backlight LED indicator to easily locate the switch at night.

RESET

RESTART

Blinking Amber and Green: App-Config mode initiated. Green: Lit up for about 30 seconds when successfully connected to the Wi-Fi network, then turns off. Blinking Amber: Resetting. Red: No Wi-Fi connection. White: Lit up when the light is switched OFF to show the Smart Switch location in the dark. Press to reboot the Smart Switch. Press and hold for about 5 seconds until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold for about 10 seconds until the Wi-Fi status LED blinks amber rapidly to factory reset the Smart Switch.

5www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Product Requirements In-wall installation with hardwired connections. Neutral wire required. Single-pole light switch. The electrical box should be more than 2 inches

deep. A smartphone or tablet running iOS 9 or higher; Android 4.1x or higher. A Wi-Fi connection (supports 802.11b/g/n standard).

Smart Wi-Fi Light Switch Installation Important Safety Information

Before installing, servicing, or removing the Smart Switch, read and follow all safety precautions, including the following:

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at the circuit breaker or fuse. Use a noncontact voltage tester to ensure the power is off.

CAUTION: RISK OF ELECTRIC SHOCK. More than one disconnect switch may be required to de-energize the equipment before servicing.

Install only in a suitable UL Listed outlet box. The Smart Switch must be installed and used in accordance with the

National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes and requirements, or are uncomfortable performing the installation, consult a qualified electrician.

The Smart Switch is an indoor single-pole switch that requires a neutral connection.

Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.

Load Information

100~120V ac, 15A max, Res 100~120V ac, 5A, Tungsten 100~120V ac, 5A, Electronic Fluorescent Ballast

6www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Download Kasa for Mobile from the App Store or Google Play.

OR scan QR

code

Connect your mobile device to a 2.4GHz Wi-Fi network.

Note: The Smart Switch only supports 2.4GHz networks.

Remove the faceplate from the Smart Switch. Launch Kasa and follow the wiring steps provided to instal and connect the Smart Switch to your home network.

Add Device

Sketch 9:41 AM 100%

Smart Plug

Range Extender RE350k

Smart Bulb

Smart Switch

Sketch 9:41 AM 100%

Lets get started

START

Kasa will guide you through the wiring

process. If you are not comfortable

with basic wiring work, please call

an electrician.

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Switch is all set up. It is now saved in your Device List.

ATTENTION: A neutral wire is required to install the Smart Switch.

1

2

3

7www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Using Kasa with Smart Switches

Kasa Account

While you dont have to have a Kasa account to use TP-Link Smart Home devices, signing up for an account provides added functionality such as:

Synchronization of settings and configurations to all your mobile devices.

Ability to control and configure the devices from outside your home.

Use of third-party services and products such as Amazon Echo.

Devices can only be associated with one Kasa account. To remove the association, turn off Remote Control in the Kasas settings, or factory reset the device.

After creating your Kasa account, you will need to verify the email associated with your account by clicking a link in an email that Kasa sends you. Until you verify the email, much of the above functionality will not work.

Kasa Settings

Kasa Settings allows you to set your global preferences such as:

Remote Control to control your Smart Home devices outside of your home. You need to sign in to your Kasa account first to turn on this function.

Location and Time to set the location and time of where the Smart Home devices are located so that the Away Mode and Schedules can run on time. You can set your homes location using your smart devices GPS function, or manually enter the latitude and longitude coordinates.

Firmware Update to update your Smart Home devices when there is an update available. Refer to Firmware Update for instructions.

8www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Customizing Smart Switches

You can personalize your Smart Switches with a descriptive name, icon, and other information from the switchs details screen.

Time Zone

Device Time

DEVICE TIME

Device Settings

9:41 PM 100%

Device Name Front Porch Switch

San Francisco

Location

Sept 15, 2015 12:00 PM

Model

Firmware Version

DEVICE INFO

MAC Address

Hardware Version

1.0.0

1.0.0

00:01:02:03:04:05

HS220

Device Icon

Delete Device

Remote Control

DEVICE CONTROLS

Disabled

1. On the Devices screen, tap on the row of the Smart Switch to go to its controls.

2. Tap the (Settings) icon at the top-right corner.

3. On the Device Settings screen, tap the icon for each setting you want to personalize.

Device Name Create a unique name for your Smart Switch.

Device Icon Choose one of the available icons or use your own custom icon.

9www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Scheduling

You can set up your lights to illuminate around your home at specific times on specific days of the week.

Schedules

9:41 PM 100%

No events yet! Add Events by tapping the button on the top right. Your saved event will be listed here.

SAVECANCEL

Create Event

9:41 PM 100%

At

Turn my Smart Plug

Repeating every

7 0 1 8 0 2

am5 5 9 4 5 8

6 0 0 pm:

S M T W T F S

ON

1. On the Devices screen, tap on the row of the Smart Switch that you want to create a schedule for.

2. Tap (Schedule) to open the Schedule screen.

3. Tap to create an event.

4. Within the Create Event screen, set your preferred state for the light bulb (ON or OFF), time, and day(s).

5. Tap Save.

You can create as many events as you like and edit them at any time from the Schedule screen.

Creating Scenes

Take full advantage of your TP-Link Smart Home devices in your home with Scenes. A scene is a preset group of Smart Devices (such as Smart Plugs and Smart Switches) that can be customized and controlled simultaneously at the touch of a button from your smartphone or tablet to easily set your mood or fit

10www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

any special occasion. For example, set a customized Movie Time to turn on the home theater system plugged into a Smart Plug and dim down the lights in your Entertainment Room to 10% at the same time.

Please keep in mind that SCENES can only be set and controlled once youre signed in to your Kasa account.

DevicesScenes

Scenes let you set the mood of your

home in one tap.

Good Morning

Get ready for the day by turning on your devices

Movie Night

Dim the lights for showtime

Good Night

Turn everything off before bedtime

Custom

Create your own scene

9:41 PM 100%

Scenes

1. On the main Home screen, tap the (Scenes) tab to switch to the Scenes view.

2. Choose one of the preset scenes to start, or choose Custom to set up your own scene that is personalized to suit your liking. To set a scene, you will need to select one or more devices to be controlled, and then define their actions and/or states.

11www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Bedroom Lamp

BULBS

PREVIEW

Main Kitchen Lights

Side Kitchen Lights

Christmas Gnome

SWITCHES

PLUGS

60%

Party Bulb

ON

OFF

Next

9:41 PM 100%

Set Scene

!

Note that you must have at least one Smart Device in order to create a scene.

Away Mode

Away Mode allows you to automate your Smart Switches in combination with other Smart Home products to respond to your specific schedules. For example, turn on and off Smart Devices at certain intervals to simulate occupancy when youre away from home.

Away Mode

9:41 PM 100%

Schedules

Devices

2

3

When youre Away, your devices will turn on and off to simulate that someone is home.

Select Devices

9:41 PM 100%

How about picking one light from each room?

Christmas Gnome

Garage Light

Party Bulb

Living Room

Bedroom Lamp

!

PLUGS

BULBS

SAVE

1. Tap the (navigation drawer) and then Away Mode.

12www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

2. Tap Select Devices to select your Smart Home devices, and then tap Save.

3. If you want to set a schedule to automate Away Mode so you dont have to manually activate it, tap Set Schedule.

Note: Multiple schedules can be set to repeat weekly on the day(s) of your choice.

4. Within the Create Event screen, set your preferred mode (Away or Home), time, and day(s).

5. Tap Save.

You can always toggle Away Mode on and off in the sidebar by tapping on the translucent button under the Kasa logo.

Runtime Summary

The Runtime summary provides a statistical information about how long the Smart Switch has been running. To view the Runtime summary, tap on the Runtime section in the Smart Switchs details screen.

13www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Maintaining the Smart Switches

Firmware Update

To keep the Smart Switches happy and up-to-date with all the latest improvement and fixes, we recommend that you update the firmware when updates are available.

Firmware Update

9:41 PM 100%

New Updates Available

Smart Plugs Latest Version: 1.2.0 UPDATE

We found available firmware updates for your

reachable devices.

4 Available Updates

Smart Bulb HS100 Latest Version: 1.2.0 UPDATE

2 Available Updates

Smart Bulb HS120 Latest Version: 1.2.0

0 Available Updates

9:41 PM 100%

Updating firmware

Please do not unplug your devices during

the update.

25%

This process may take a few minutes.

1. Launch Kasa.

2. Tap the (navigation drawer) and then Settings.

3. Tap Firmware Update.

4. Within the Firmware Update screen, tap Update.

Remember: Only the Smart Switches that are currently reachable and have an available update will be shown in the Firmware Update screen.

It is important to leave the Kasa app running while it finishes updating the Smart Switches. Try not to minimize the app, close the app, or interrupt the update to prevent problems.

14www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Resetting

Resetting the Smart Switch can help you troubleshoot any issues you may have. Please keep in mind that factory resetting a device will erase all of your custom settings and restore them to factory default settings.

RESET

The RESET button located underneath the Smart Switch has two functions:

Press and hold for about 5 seconds until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode.

Press and hold for about 10 seconds until the Wi-Fi status LED blinks amber rapidly to reset the Smart Switch to factory defaults. Note that factory setting the Smart Switch will erase all of your custom settings, and youll have to set it up again.

15www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Troubleshooting

Frequently Asked Questions

1. What should I do when I cant turn the Smart Switch on/off manually?

If the Smart Switch doesnt respond when pressing the physical switch:

Make sure that you restore power to the Smart Switch at the circuit breaker.

Make sure the Smart Switch is wired correctly. Please consult with a qualified electrician.

2. What should I do when the Smart Switch doesnt respond to commands or scheduled automations?

Check your network connectivity. Check if the Wi-Fi status LED on the Smart Switch is blinking amber and

green. If so, reconnect the Smart Switch to your Wi-Fi network. Do not use a metal faceplate with the Smart Switch to prevent Wi-Fi

signal interference. Power cycle your router and/or reboot the Smart Switch by pressing the

RESTART button underneath the switch. Factory reset the Smart Switch by pressing and holding the RESET

button. Youll need to configure the Smart Switch again.

3. How far can I be and still able to control my lights via the Smart Switch?

You can be anywhere in the world and still able to control your lights as long as you have an active Internet connection and Remote Control enabled.

4. Can I install two or more Smart Switches to control one light fixture?

No. The Smart Switch is designed for single-pole (one location) wiring only and requires a neutral wire for operation.

5. How do I pair the Smart Switches with Amazon Echo?

For pairing instructions, please visit www.tp-link.com/en/faq-944.html or within the Kasa Help section.

16www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Usage Tips

Place the Smart Switch within the range of your Wi-Fi router or access point (approximately 150 feet).

Avoid physical obstructions and radio interference in the surrounding area.

Support

Specifications can be found on the product page at www.tp-link.com.

Our Technical Support and troubleshooting information can be found at www.tp-link.com/support.

17www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Mark Warning

18www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY(the maximum transmitted power)

2412MHz2472MHz(20dBm)

No restrictions exist in the use of radio frequencies or frequency bands in all EU member states and EFTA countries.

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

The device complies with RF specifications when the device used at 20 cm from your body.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1) This device may not cause interference, and

2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement.

Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

19www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Dclaration dexposition aux radiations

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

.

NCC Notice

BSMI Notice

20www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Pb

Cd

Hg

CrVI

PBB

PBDE PCB

1. " 0.1wt%" " 0.01wt%"

2. " "

3. ""

, .

Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended

Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

21www.tp-link.com

Users Manual Smart Wi-Fi Light Switch

Explanation of the symbols on the product label

AC voltage

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a

Manualsnet FAQs

If you want to find out how the HS200 V3 TP-Link works, you can view and download the tp-link HS200 V3 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for TP-Link HS200 V3 as well as other TP-Link manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a TP-Link HS200 V3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the tp-link HS200 V3 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This tp-link HS200 V3 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download tp-link HS200 V3 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print tp-link HS200 V3 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the tp-link HS200 V3 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.