Toyota Camry HV 2018 Sedan Quick Reference Guide PDF
Summary of Content for Toyota Camry HV 2018 Sedan Quick Reference Guide PDF
CAMRY HYBRID
2 0 1 8
QUICK REFERENCE GUIDE
CAMRY HYBRID 2018
This Quick Reference Guide is a summary of basic vehicle operations. It contains brief descriptions of fundamental operations so you can locate and use the vehicles main equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for the Owners Manual located in your vehicles glove box. We strongly encourage you to review the Owners Manual and sup- plementary manuals so you will have a better understanding of your vehicles capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
new Camry Hybrid.
A word about safe vehicle operations This Quick Reference Guide is not a full description of Camry Hybrid operations. Every Camry Hybrid owner should review the Owners Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in color throughout the Owners Manual. Each box contains safe operating instructions to help you avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of printing. Toyota reserves the right to make changes at any time without notice.
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
1
INDEX
Engine maintenance 8 Fuel tank door release & cap 7 Hood release 8 Indicator symbols 4-5 Instrument cluster 4 Instrument panel 2-3 Instrument panel light control 8 Keyless entry1,2 6 Smart Key system1,2 7
1 Visit your Toyota dealer for information on customizing this feature. 2 Programmable by customer. Refer to the Owners Manual for instructions and more information. 3 HomeLink is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
BLUETOOTH DEVICE PAIRING SECTION 43-45
Audio 23 Auto lock/unlock1,2 10 Automatic air conditioning/heating 15 Birds Eye View Camera with Perimeter Scan function 18 Blind Spot Monitor with Rear Cross Traffic Alert (BSM w/RCTA) 16 Bottle holders/Cup holders 25 Clock 26 Color Head-Up Display (HUD) 20 Door locks 22 Drive mode switches 12 EV drive mode 12 Electric parking brake 11 Garage door opener (HomeLink)3 26 Hybrid Synergy Drive System 9 Hybrid transmission 10 Intelligent Clearance Sonar with Rear Cross Traffic Braking (ICS w/RCTB) 18-19 Lights1 & turn signals 14 Moonroof 21 Multi-Information Display (MID)1 19 Power outlets-12V DC 20 Rear view monitor system 18 Seat adjustments-Front 13 Seat folding-Rear 13 Seat heaters 15 Seats-Head restraints 13 Steering lock release 10
Floor mat installation 42 Rear door child safety locks 38 Safety Connect 39 Seat belts 38 Seat belts-Shoulder belt anchor 38 Spare tire & tools 40 Star Safety System 41-42 Trunk-Internal release 40 Tire Pressure Monitoring (warning) System (TPMS) 39
FEATURES & OPERATIONS (continued)
TOYOTA SAFETY SENSE P (TSS-P)
Steering wheel switches (Audio, MID & phone: Bluetooth) 24 Tilt and telescopic steering wheel 11 USB/AUX port 21 Vehicle Stability Control (VSC)/ TRAC OFF switch 12 Windows - Power 22 Windshield wipers & washers 15 Wireless charging 25
Automatic High Beams (AHB) 37 Full-Speed Range Dynamic Radar Cruise Control (DRCC) 34-36 Lane Departure Alert with Steering Assist function (LDA w/SA) 30-33 Pre-Collision System with Pedestrian Detection function (PCS w/PD) 28-30 Quick overview- Toyota Safety Sense P (TSS-P) 27 Sensors 27
2018_CamryHV_QRG_V4-JA.indd 1 6/27/17 8:41 PM
Steering wheel controls
2
OVERVIEW Instrument panel
Tilt and telescopic steering lock release lever
Headlight/turn signal/fog lights controls
Automatic High Beam (AHB) switch VSC OFF switch
Birds Eye View Camera ON switch1,2 Trunk opener switch
Fuel tank door release switch
Odometer/trip meter Instrument panel light control switch
STOP/START/ENGINE button
Hood lock release lever
Dynamic Radar Cruise Control (DRCC) or Cruise control switch
Dynamic Radar Cruise Control (DRCC) vehicle-to-vehicle distance button
Lane Departure Alert with Steering Assist (LDA w/SA) switch
Steering wheel audio controls2
Telephone switch
Audio remote control switches2
Padde shift switches1
Windshield wiper and washer controls
Meters/Multi-Information Display (MID)
Meter control switches
Voice command switch2
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
3
1 If equipped. 2 For vehicles with Entune Premium Audio or Entune Audio Plus, refer to the
Navigation System Owners Manual and 2018 Entune Audio Quick Reference Guide.
Emergency flasher switch
Air conditioning controls
EV drive mode switch Electric parking brake switchDriving mode select switches
Seat heater controls
Audio system/Navigation system2
Wireless charger switch1
Brake hold switch
4
For details, refer to Indicators and warning lights, Section 2-2, 2018 Owners Manual.
Anti-lock Brake System warning1
Airbag SRS warning1
OVERVIEW Instrument cluster
Automatic High Beam (AHB) indicator1
Auto Glide Control (AGC) indicator
Blind Spot Monitor (BSM) indicator4
AIRBAG ON/OFF indicator Type A1
AIRBAG ON/OFF indicator Type B1
1 If indicator does not turn off within a few seconds of starting the Hybrid System, there may be a malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to Cruise control, Section 4-5, 2018 Owners Manual.
Indicator symbols
Hybrid System Indicator
Hybrid System Indicator
Outside temperature
Outside temperature
Speedometer
Speedometer
Odometer/trip meter
Odometer/trip meter
Shift position
Shift position
Fuel gauge
Fuel gauge
Multi-information display
Multi-information display
Engine coolant temperature gauge
Engine coolant temperature gauge
Instrument panel light control
Instrument panel light control
Service indicators and reminders
Type A
Type B
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
5
Brake system warning1 Malfunction/ Check Engine indicator1
Brake system warning
Driver seat belt reminder and/ or front passenger seat belt reminder (alarm will sound if speed is over 12 mph)
Low Tire Pressure Warning1
Low fuel level warning
Theft deterrent/ Engine Immobilizer system indicator
Fuel tank door position
Cruise control indicators2,3
READY indicator
Master warning1
Headlight low/high beam indicators
Turn signal indicator
Pre-Collision System (PCS) warning light1,3
Lane Departure Alert (LDA) indicator
Slip indicator1
Vehicle Stability Control OFF indicator1
Parking brake indicator3
Electric power steering warning1
Intelligent Clearance Sonar (ICS) OFF indicator1,3,4
Rear passenger seat belt reminder indicator Type A Rear passenger seat belt reminder indicator Type B
Electric brake hold operated indicator1,3
Electric brake hold standby indicator1
BSM w/Rear Cross Traffic Alert (RCTA) Indicator4
BSM outside rear view mirror indicators4
Intuitive Parking Assist (IPA) indicator4
Sport mode driving indicator ECO MODE indicator
EV drive mode indicator
EV indicator
Low outside temperature indicator
3 Light flashes to indicate a malfunction. 4 If equipped.
6
LOCKING OPERATION
UNLOCKING OPERATION
TRUNK LID
PANIC BUTTON
*NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety.
START FUNCTION
OVERVIEW Keyless entry
Carry remote Smart key feature
All-door lock
Touch
Carry remote Smart key feature
Grasp
Driver door unlock*
Push ONCE: Driver door TWICE: All doors
Push
Push
Push and hold
Carry remote Smart key feature
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. In some models, grasping front passenger door handle will unlock all doors. Please refer to the Owners Manual for more details on how to program the doors. NOTE: Doors may also be locked/unlocked using remote.
POWER (WITHOUT STARTING HYBRID SYSTEM)
Push
Without depressing the brake pedal, pressing the POWER button will change the operation mode in succession from:
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Carry remote to start
2018_CamryHV_QRG_V4-JA.indd 6 6/27/17 8:49 PM
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
7
START FUNCTION
Fuel tank door release & cap
Smart key system
NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check engine indicator may illuminate.
Turn to open
StorePush
Close
Without depressing the brake pedal, pressing the POWER button will change the operation mode in succession from:
All systems OFF; emergency flashers can be used.
Accessories such as the audio will operate.
Power ON; all electrical systems can be used.
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Depress brake pedal Push
Carry remote to start
8
OVERVIEW Hood release
Engine maintenance
Instrument panel light control
Push to control brightness
Windshield washer fluid tank
Engine oil level dipstick
Engine coolant reservoir
Engine oil filler cap
NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the Warranty Maintenance Guide.
Pull up latch and raise hood
Pull
Push
Darker Brighter
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
9
TIPS FOR IMPROVED FUEL ECONOMY
STARTING YOUR VEHICLE
NOTE: Fuel consumption and energy information of the Hybrid System are shown on the Entune Audio system screen or the navigation system.
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine and electric motor to provide the most efficient combination of power for the vehicle. To conserve energy, when the brakes are applied the braking force generates electricity which is then sent to the traction battery. In addition, the engine shuts off when the vehicle is stopped. The benefits are better fuel economy, reduced vehicle emissions and improved performance.
- Ensure tire pressures are maintained at levels specified in the Owners Manual. - When possible, link trips to reduce engine cold starts. - Avoid driving at speeds that are higher than necessary, especially on the highway. - When possible, avoid sudden stops to maximize regenerative braking energy. - Minimize use of the air conditioning.
FEATURES & OPERATIONS Hybrid Synergy Drive System
1. Put the selector lever in P. 2. Depress the brake pedal, and will be displayed on the Multi-Information
3. Press the POWER switch briefly and firmly. 4. The READY light will blink. After a few seconds, when the light remains steady and a beep sounds, you may begin driving.
10
Hybrid transmission
Auto lock/unlock
Park*
Reverse Neutral Drive Engine braking
Push
Turn
Steering lock release
FEATURES & OPERATIONS
Automatic door locks can be programmed to operate in different modes, or turned OFF. Shift position linked door locking/unlocking function -Doors lock when shifting from Park. -Doors unlock when shifting into Park. Speed linked door locking function -
-Doors unlock when the engine switch is set to OFF and drivers door is opened. Refer to the Owners Manual for more details.
* The POWER switch/ignition switch must be ON and the brake pedal depressed to shift from Park.
Shift the shift lever to S position from D position. + -
Downshifting increases power going uphill, or provides engine braking downhill. For best fuel economy during normal driving conditions, always drive with the shift lever in the D position.
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
11
Hold wheel, push lever down, set angle and length, and return lever. NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
Electric Parking Brake (EPB)
Automatic (shift lever operation)
Manual
To turn automatic mode ON, while vehicle is stopped, pull and hold switch and until
While depressing brake, shifting into P position will automatically set the brake and turn indicator on in meter. To release brake, depress brake and shift out of P. The indicator light turns off. To turn automatic mode OFF, push and hold parking brake switch until EPB Shift Interlock Function Deactivated displays on the MID.
While vehicle is stopped and brake pedal is depressed, pull to set parking brake and display indicator light turns on in the meter. To release, press the brake pedal and push switch. The indicator light turns off. Refer to the Owners Manual for more details.
Lock release lever
Angle
Length
Driver sideAutomatic mode Manual mode (Brake HOLD switch)
12
EV drive mode
Vehicle Stability Control (VSC)/TRAC OFF Switch
FEATURES & OPERATIONS Drive mode select switches
Use EV drive mode when driving short distances to reduce noise late at night in residential areas or to cut emissions when parking in a small garage or underground car park.
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like mud, dirt or snow. While car is stopped, press switch to disable the TRAC system. To disable both VSC and TRAC systems, press the switch for at least 3 seconds. Refer to the Owners Manual for more details.
Normal - Suitable for normal driving.
SPORT mode - Use when a higher level of response is desired, such as when driving in mountainous regions.
ECO MODE - Helps achieve lower fuel consumption during trips that involve frequent accelerating and braking. Refer to the Owners Manual for more details.
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
13
Seat adjustments - Front
Seats - Head restraints (if equipped)
Seat folding - Rear (1) (2)
Tip: To fold rear seats, the release button is located in the trunk.
Seat position (forward/backward)
Seat cushion angle Height cranka
Seatback angle
Lumbar support (driver side only)
Lock release button
POWER SEAT
Pull
Fold down
Refer to the Owners Manual for more details.
14
HEADLIGHTS
TURN SIGNALS
Lights & turn signals FEATURES & OPERATIONS
-Daytime Running Light system (DRL) Automatically turns on the headlights at a reduced intensity.
-Automatic light cut off system delay, or lock switch on remote may be pushed after locking.
1 The right hand signals will flash three times. 2 The left hand signals will flash three times.
Parking lights
Headlights
DRL OFF
AUTO
High beam
High beam flasher
Right turn
Lane change1
Lane change2
Left turn
Low beam
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
15
* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease wipe frequency.
Refer to the Owners Manual for more details.
Windshield wipers & washers
Automatic air conditioning/heating
Adjust frequency*
Pull to wash and wipe
Mist
Interval wipe
Slow
Fast
Seat heaters (if equipped)
Driver seat Front passenger seat
Temperature selector (driver side)
Automatic climate control ON - Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
SYNC button - Indicator ON: Synchronized temperature settings for driver and pas- sengers. Indicator OFF: Separate temperature settings for driver and passengers.
Airflow mode display
Airflow vent mode - In or mode, use outside air ( indicator OFF) to reduce window fogging.
Temperature selector (passenger side)
S-FLOW mode Recirculate cabin air (outside air when OFF)
Outside rearview mirror/ Rear defogger
Climate control OFF
Air ConditioningON/OFF
Fan speed
Windshield airflow/defogger
16
FEATURES & OPERATIONS Blind Spot Monitor with Rear Cross Traffic Alert (BSM w/RCTA) (if equipped)
Intelligent Clearance Sonar with Rear Cross Traffic Braking (ICS w/RCTB) (if equipped)
When parking, this available system scans for stationary objects, like walls or lampposts. Should the system anticipate a collision, it will emit an audible and visible alert, reduce engine or motor output, and automatically apply the brakes if needed.
System ON/OFF on the Multi-Information Display.
CHANGE SETTINGS
Indicators
Indicators
RCTA function display
Rear Cross Traffic Alert buzzer
Outside rear view mirror indicators
The Blind Spot Monitor is a system that has two functions:
The system is designed to use radar sensors to detect vehicles traveling in the Camry HVs blind spot and advises the driver of the vehicles presence via the outside rear view mirror indicators. Refer to the Owners Manual for limitations and more details on this system before attempting to use it.
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
17
If the sensors detect an obstacle, the buzzer and MID display informs the driver of the approximate position and distance of the obstacle by illuminating continuously
Note: Use / , / and of the meter control switches to select and in the Multi-Information Display (MID) to change settings. The system will continue in the last state it was in (ON or OFF) when the engine is started again. Refer to section Intuitive parking assist in the Owners Manual for more details.
Note: Use / , / and of the meter control switches to select and in the Multi-Information Display (MID) to change settings. The system will continue in the last state it was in (ON or OFF) when the engine is started again. Refer to the Owners Manual for more details on this system.
Front center sensor
Rear center sensor
Corner sensors (front)
Corner sensors (front)
Corner sensors (rear)
Corner sensors (rear)
18
FEATURES & OPERATIONS Rear view monitor system
See-through view switch Moving view switch Rotation pause switch Rotation pause switch
The Birds Eye View Camera with Perimeter Scan function assists the driver in viewing the surroundings, when operating at low speeds or parking, by combining front, side and rear cameras and displaying an overhead image on the Entune screen. To view or turn OFF the screen, press the camera switch when the shift lever is in the P position. It will display two angles, the Moving view and the See Through view. For limitations and more details, refer to section 3-1 in the NAVIGATION SYSTEM OWNERS MANUAL.
Moving view See through view
Birds Eye View Camera with Perimeter Scan Function (if equipped)
The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The camera for the rear view monitor system is located above the license plate.
To adjust the image on the rear view monitor screen, press the MENU button and select Display on the screen. Select Camera to adjust the screen contrast and brightness. Refer to the Navigation Owners Manual for limitations and more details on this system.
19
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
Multi-Information Display (MID) 4.2 DISPLAY
7 DISPLAY
Push meter control switches to change information in the following:
Push meter control switches to change information in the following:
Refer to the Owners Manual for more details.
Indicators
Menu icons
Shift position
Outside temperature
Speed limit display (with navigation system)
Full-Speed DRCC and Lane Departure Alert display
Previous screen
Previous screen
Speedometer
Indicators
Display area
Menu icons
Shift position
Indicators
Enter/Select
Enter/Select
Scroll/search screens
Scroll/search screens
Odometer/trip meter control
ODO/TRIP switch
Odometer/trip meter display
Odometer/trip meter control display
FEATURES & OPERATIONS Color Head-up display (HUD) (if equipped)
Power outlets-12V DC
The POWER switch/ignition switch must be set at ACCESSORY or ON position for use.
Front console Center console (USB ports)*
* If equipped.
The head-up display can display the current vehicle speed and ECO driving indicator in front of the driver. Also, it can display various types of information to assist the driver. Select and then Head-up display settings. And push , to enter selection.
Refer to the Owners Manual for more details.
Driving assist system status/ navigation system-linked display area
Shift positiion/speed limit display area
Hybrid System Indicator/Tachometer
Information display area
Vehicle speed display
20
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
21
21
SLIDING OPERATION
TILTING OPERATION
Moonroof (if equipped)
USB/AUX port
By connecting a USB-compatible portable audio device or USB memory to the USB port, you can listen to music from the portable audio device or USB memory through the vehicles speaker system.
By inserting a mini plug into the AUX port, you can listen to music from a portable audio device through the vehicles speaker system while in AUX mode.
Open lid
Tilt Close
Open Close
Recommended driving position to minimize wind noise.
Push once to open; moon roof will automatically stop at the recommended position. Push again to open completely.
Push once to open partway; again to open completely.
22
Automatic operation Push the switch completely down or pull it completely up and release to fully open or close. To stop the window partway, operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Drivers window remains operable.
Windows - Power
Lock Unlock
Door locks
Up
Down
Window lock switch
Driver side
FEATURES & OPERATIONS
23
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
ENTUNE 2
ENTUNE 1 AUDIO WITH DYNAMIC NAVIGATION & APP SUITE 2
ENTUNE
Insert a disc in slot.Eject CD
* MAP button: Push to display map screen or to repeat a voice guidance command. (Entune Premium Audio only). INFO button: Push to display fuel and energy information screen.
*
1 With Clari-Fi 2 If equipped.
Audio
Push to turn ON/OFF and volume
Turn to change radio station or skip to next or previous track.
Touch screen display
AUDIO Button Push to display audio screen or access audio functions.
SEEK Button Seek station/CD track select
TRACK Button Seek station/CD track select
MENU Button Turn to tune radio stations manually or select tracks or files PHONE Button
Push to display Bluetooth
hands-free system. INFO Button Push to display fuel information or energy monitor screen.
APPS Button Access to traffic and weather
HOME Button Access to Home screen.
HOME SCREEN - The home screen offers a two and three panel layout. Information and layout will vary depending on selected set up.
Refer to the Navigation System Owners Manual and 2018 Entune Audio Quick Reference Guide.
NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Entune system if it will distract you.
24
Audio switches
Multi-Information Display (MID) control switches
Phone switches
Bluetooth technology allows dialing or receipt of calls without taking your hands off the steering wheel or using a cable to connect the compatible telephone and the system. Refer to the Navigation Owners Manual or 2018 Entune Audio Quick Reference Guide, for more information about phone connections and compatibility. Refer to Bluetooth Device Pairing Section at the end of this booklet, to connect your smart phone to the Entune touch screen system.
FEATURES & OPERATIONS
Volume controls
Return to previous screen
Voice command switch
Select/enter
Seek
Steering wheel switches (Audio, MID & phone: Bluetooth)
Microphone
MODE Push to turn audio ON and select an audio mode. Push and hold to turn the audio OFF.
Receive/end call
NOTE: Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
/ or / press to scroll screens, change the displayed content and move the cursor.
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
25
Bottle holders/Cup holders
Front
Wireless Charging (if equipped)
Rear
Power switchCharge area Operation indicator light
A mobile device can be charged wirelessly on the tray. (1) Press the wireless charger power switch and the green operation indicator light turns on. (2) Place a mobile device on the tray as shown in the illustration. An amber indicator illuminates while charging is in progress. When charging is complete, the indicator illuminates green. Some phones, cases or cover type wireless chargers may not cause the green indicator to illuminate even though it is fully charged.
Refer to the Owners Manual for more details on this system before attempting to use it.
Press
When the engine is turned off, the last state (ON/OFF) of the charger is memorized.
Place
(1)
(2)
26
FEATURES & OPERATIONS
To find your system, refer to Audio section of this guide. MENU button next to the screen.
Setup or General in the touch screen to access the general settings screen.
Refer to the Navigation Owners Manual for more details.
1 Entune Premium Audio only 2 Entune Audio Plus/Entune Premium Audio only
Garage door opener (HomeLink*) (if equipped)
Garage door openers manufactured under license from HomeLink* can be programmed to operate garage doors, estate gates, security lighting, etc.
Refer to Garage door opener, Section 5-4 in the Owners Manual for more details.
For programming assistance, contact HomeLink
http://www.homelink.com/toyota. * HomeLink
Buttons
Remote
HomeLink indicator light
Garage door operation indicators
Select to change time zone
Select to daylight savings time ON/OFF/AUTO.1
Select to set to automatic GPS adjustment of clock.2
Select to set hour display to 12 or 24 hour time.
Clock
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
27
Quick overview-Toyota Safety Sense P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear view mirror and a millimeter-wave radar mounted in the front grill. These sensors support the driver assist systems.
Camera sensorRadar sensor
TOYOTA SAFETY SENSE
Toyota Safety Sense
to help mitigate or prevent collisions across a wide range of traffic situations, in certain conditions. TSS-P is designed to help support the drivers awareness, decision making and vehicle operation contributing to a safe driving experience.
more details to understand these functions and complete safety precautions. For
Lane Departure Alert with Steering Assist function (LDA w/SA) LDA w/SA is designed to provide notification when the system detects an unintended lane departure. The Steering Assist function is designed to provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane.
Automatic High Beams (AHB) AHB is designed to detect the headlights of oncoming vehicles and the tail lights of preceding vehicles and switch between high beams and low beams as appropriate.
Pre-Collision System with Pedestrian Detection function (PCS w/PD) PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system detects a potential collision with a preceding vehicle is likely to occur. Advanced millimeter-wave radar sensor system is designed to work with the camera sensor to help recognize a preceding pedestrian, and provide an alert, mitigation and/or avoidance support in certain conditions.
Full-Speed Range Dynamic Radar Cruise Control (DRCC) DRCC is designed to help maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed.
28
TOYOTA SAFETY SENSE
The Pre-Collision System uses a radar sensor and camera sensor to help detect vehicles and pedestrians in front of your vehicle. As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not use PCS instead of normal braking operations under any circumstances. Do not attempt to test the operation of the pre-collision system yourself, as the system may not operate or engage, possibly leading to an accident. In some situations, such as when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a curve and for a few seconds after driving on a curve, a vehicle may not be detected by the radar and camera sensors, preventing the system from operating or engaging properly. Refer to a Toyota Owners Manual for a list of additional situations in which the system may not operate properly.
Refer to a Toyota Owners Manual for additional information on PCS w/PD operation, settings adjustments, limitations, and precautions before attempting to use it.
Pre-Collision Warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the Multi-Information
Pre-Collision Brake Assist If the driver notices the hazard and brakes, the system may provide additional braking force using Brake Assist. This system may prime the brakes and may apply greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking If the driver does not brake in a set time and the system determines that the possibility of a frontal collision with a preceding vehicle is extremely high, the system may automatically apply the brakes, reducing speed in order to help the driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian Detection function (PCS w/PD)
29
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
CHANGING THE PCS ALERT TIMING
Far Middle
(default) Near
Monocular camera sensor
Millimeter wave radar
As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS-P package may also help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense P, PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle camera of PCS detects a potential pedestrian based on size, profile, and motion of the detected pedestrian. However, a pedestrian may not be detected depending on the conditions, including the surrounding brightness and the motion, posture, size, and angle of the potential detected pedestrian, preventing the system from operating or engaging. Refer to a Toyota Owners Manual for additional information.
PEDESTRIAN DETECTION FUNCTION
switches and select or from the Multi-Information
switches and select from the MID and then press . The setting screen is displayed.
each time to change the setting. Each time it is pressed, the response to the PCS alert timing changes as shown above. You can press to go back to the menu. Note: PCS is enabled each time the engine switch is turned to Ignition On. The system can be disabled/enabled and the alert timing of the system can be changed. (Alert timing only, brake operation remains the same).
30
TOYOTA SAFETY SENSE
LDA in TSS-P uses an in-vehicle camera designed to detect visible white and yellow lane markers in front of the vehicle and the vehicles position on the road. If the system determines that the vehicle is starting to unintentionally deviate from its lane, the system alerts the driver with an audio and visual alert. When the alerts occur, the driver must check the surrounding road situation and carefully operate the steering wheel to move the vehicle back to the center part of their lane.
on relatively straight roadways. In addition to the alert function, LDA w/SA also features a steering assist function. When enabled, if the system determines that the vehicle is on a path to unintentionally depart from its lane, the system may provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane.
Lane Departure Alert with Steering Assist function (LDA w/SA)
Press the PCS switch for 3 seconds or more to turn it off. The warning light and message displays in the MID. Depress it again to turn it back on. Note: The system is enabled each time the power switch is turned to ON mode. Refer to a Toyota Owners Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it.
31
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off. Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
LDA FUNCTIONS
LDA function display
Steering assist indicator
LDA indicator
Lane
(2)(1)
32
TOYOTA SAFETY SENSE
The LDA function to the driving assist system information screen.
markers on the road are detected. A side flashes orange to alert the driver when the vehicle deviates from its lane.
are not detected or the function is temporarily cancelled. Note: When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. For example, LDA may not function on the side(s) where white/yellow lines are not detectable. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
DISABLING THE STEERING ASSIST FUNCTION
High - Is designed to warn approximately before the front tire crosses the lane marker. Normal - Is designed to warn approximately when the front tire crosses the lane marker.
switches and select or from the Multi-Information
switches and select the setting function and then press . each time to change the setting. to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
switches and select or from the Multi-Information Display
switches and select the setting function and then press . each time to change the setting. to go back to the menu.
33
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
SWS is a function of LDA and is designed to detect swaying based on the vehicle location in the lane and the drivers steering wheel operation. To help prevent swaying, the system alerts the driver using a buzzer sound and a warning displays in the MID.
Continuous lane deviations from swaying.
Gentle swaying from drivers inattentiveness.
Acute steering wheel operation after the number of operations decrease due to drivers inattentiveness.
DISABLING SWS
switches and select or from the Multi-Information
switches and select the setting function and then press . each time to change the setting. to go back to the menu.
switches and select or from the Multi-Information
switches and select the setting function and then press . each time to change the setting. to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
34
TOYOTA SAFETY SENSE
TURNING SYSTEM ON/OFF
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a slower vehicle traveling in front and accelerate back up to the selected speed if the vehicle in front changes lanes or speeds up.
(1) Push to turn DRCC system ON. (2) Use the steering wheel controls to increase speed by pushing +RES or
decrease the speed by pushing -SET. Push and hold to make a large
(3) Push Cancel to cancel the adjusting speed operation.
(1) Note: Push once to turn DRCC ON. Push again to turn OFF.
After DRCC is turned off and you hold the cruise control switch for at least 1.5 seconds, the system switches to constant speed control mode.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. This mode is always selected first when the cruise control button is depressed. Constant speed cruise control mode is also
Resume/ Set speed
Cruise control
Set speed
Cancel
Cruise control switches
(2) (3)Increase speed
Cancel Descrease speed
Display
Set speed
Full-speed Range Dynamic Radar Cruise Control vehicle-to-vehicle distance button
Indicators
35
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
To change the vehicle-to- vehicle distance
Push the button to cycle through the settings, which will change progressively.
This mode employs a radar sensor to detect the presence of a preceding vehicle
following distance and operates to maintain a suitable following distance from the vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)
Constant speed cruising when there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle distance control. Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle. When a greater reduction in vehicle speed is
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning tone warns you when the system cannot decelerate sufficiently to prevent your vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill slopes.
LONG (default setting)
MIDDLE SHORT
Preceding vehicle mark
36
TOYOTA SAFETY SENSE
SWITCHING TO CONSTANT SPEED CONTROL MODE
SETTING CONSTANT SPEED CONTROL
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC , push button again to turn the system off first, then push and hold button for at least 1.5 seconds to switch. Note: When the engine is turned off, it will automatically default to DRCC.
Acceleration when there are no longer any preceding vehicles driving slower than the set speed
The system accelerates until the set speed is reached. The system then returns to constant speed cruising.
1.5 seconds
Refer to a Toyota Owners Manual for additional information on DRCC operation, settings adjustments, limitations, and precautions before attempting to use it.
1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed exceeds 25 mph.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SPEED on page 33.
Increase speed
Descrease speed
37
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
AHB is a safety system designed to help drivers see more of whats ahead at nighttime without dazzling other drivers. When enabled, AHB uses an in-vehicle camera to help detect the headlights of oncoming vehicles and tail lights of preceding vehicles, then automatically switches between high and low beams as appropriate to provide the most light possible and enhance forward visibility. By using high beams more frequently, the system may allow earlier detection of pedestrians and obstacles. Refer to a Toyota Owners Manual for additional information on AHB operation, settings adjustments, limitations, and precautions before attempting to use it.
Automatic High Beams (AHB)
AUTO position.
switch. The AHB indicator will come on when the headlights are turned on automatically to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off. The AHB indicator will turn off. Turn switch to position and the manual high beam indicator turns on.
When all of these conditions are met, high beams will be automatically turned on
The area ahead of the vehicle is dark. There are no oncoming or preceding vehicles with headlights or tail lights turned on. There are few street lights on the road ahead. If any of these conditions occur, the system is designed to automatically turn off high beams:
The area ahead of the vehicle is not dark. Oncoming or preceding vehicles have headlights or tail lights turned on. There are many streetlights on the road ahead.
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1) (2)
38
SAFETY & EMERGENCY FEATURES
Seat belts
the Automatic Locking Retractor (ALR) will prevent it from being re-extended beyond that point, unless fully retracted again. This feature is used to help hold child restraint systems securely. To find more information about seat belts, and how to install a child restraint system, refer to the Owners Manual.
Keep as low on hips as possible
Take up slack
Too high
Rear door child safety locks
Moving the lever downward will allow the door to be opened only from the outside.
Rear door
Lock
Unlock
Seat belts - Shoulder belt anchor
Push up, or squeeze lock release to lower
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
39
Safety Connect (if equipped)
Tire Pressure Monitoring (warning) System (TPMS)
Safety Connect is a subscription-based telematics service that uses Global
and security features to subscribers. Safety Connect is supported by Toyotas designated response center, which operates 24 hours per day, 7 days per week. Services for subscribers include: Automatic collision notification, Stolen vehicle location, Emergency assistance button and Enhanced roadside assistance
Contact your dealer for more information about Safety Connect.
If the Tire Pressure Warning indicator illuminates without blinking, adjust tire pressures to factory-specified levels.* The light will turn off after a few minutes. The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage.
take the vehicle to your local Toyota dealer.
* Refer to load label on door jamb or the Owners Manual for tire inflation specifications.
Microphone
LED Indicators
SOS button
40
SAFETY & EMERGENCY FEATURES
TOOL LOCATION
REMOVING THE SPARE TIRE
Spare tire & tools
Trunk-Internal release
Refer to the Owners Manual for tire changing and jack positioning procedures.
secures the spare tire.
Pull up
Luggage floor cover
Jack handle
Jack Wheel nut wrench
Spare tire
O VE
R VI
EW FE
A TU
R ES
& O
PE R
A TI
O N
S TO
YO TA
S A
FE TY
S EN
SE SA
FE TY
& E
M ER
G EN
C Y
FE A
TU R
ES
41
Star Safety System
Toyotas ABS sensors detect which wheels are locking up and limits wheel lockup by pulsing each wheels brakes independently. Pulsing releases brake pressure repeatedly for fractions of a second. This helps the tires attain the traction that current road conditions will allow, helping you to stay in directional control.
Brake Assist is designed to detect sudden or panic braking, and then add braking pressure to help decrease the vehicles stopping distance. When theres only a split second to react, Brake Assist can add additional brake pressure more quickly than just the driver alone can.
VSC helps prevent loss of traction during cornering by reducing engine power, and Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
Toyotas TRAC sensors are activated when one of the drive wheels starts to slip. TRAC limits engine output and applies the brakes to the spinning wheel. This transfers power to the wheels that still have traction to help keep you on track.
maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt forward, reducing the braking power of the rear wheels. EBD responds to sudden stops by redistributing brake force to enhance the braking effectiveness of all four wheels.
All new Toyota vehicles come standard with the Star Safety SystemTM, which
Smart Stop Technology automatically reduces engine power when the accelerator and brake pedals are pressed simultaneously under certain conditions. SST engages when the accelerator is depressed first and the brakes are applied firmly for longer than one-half second at speeds greater than five miles per hour. SST doesnt engage if the brake pedal is depressed before the accelerator pedal, allowing vehicles to start on a steep hill and safely accelerate without rolling backward.
42
SAFETY & EMERGENCY FEATURES
Floor mat installation There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle has model-specific floor mats. Installation is easy. To keep your floor mat properly positioned, follow these steps: Only use Toyota floor mats designed for your specific model. Use only one floor mat at a time, using the retaining hooks to keep the mat in
place. Install floor mats right side up.
Always align the marks
VSC helps prevent loss of traction during cornering by reducing engine power and applying brake force to selected wheels.
Toyotas VSC monitors steering angle and the direction your vehicle is traveling. When it senses that the front or rear wheels begin to lose traction, VSC reduces engine power and applies braking to selected wheels. This helps restore traction and vehicle control.
43
BLUETOOTH DEVICE PAIRING SECTION
Do not attempt the Bluetooth Pairing process while driving.
44
BLUETOOTH DEVICE PAIRING To begin the Bluetooth Pairing process, press the HOME button on the faceplate of your multimedia system.
Bluetooth Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for hands-free calling and for audio streaming via Bluetooth. This pairing process is quick and easy. All you have to do is setup the phone and multimedia system to form a connection.1
Select "Bluetooth", then select "Add New Device"on display screen.
Ensure Bluetooth is turned on for your device.
Select "Device Name".
iPhone bluetooth Menu Android bluetooth Menu
1 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
Check the display on your smart phone. Does the PIN XXXX match the PIN displayed? If it does select "Pair".
Press [MENU] on the faceplate, then select "Setup" on display screen. Entune Audio/Entune Audio Plus Entune Premium Audio
STEP 1
STEP 2
STEP 4
STEP 3
STEP 5
45
"Connecting" displays while device is forming the connection to your multimedia system.
Enable Notifications (text message). While pairing your device message will display: "You may need to allow message access on your phone".
Note: You may also select "Skip" on display screen to skip enabling notifications. If skipped proceed to Step 8.
Turn on "Show Notifications" for iPhone or "ON" for Android.
A confirmation will appear once your phone has been paired and connected.
iPhone Android
Bluetooth Pairing for your phone (cont.)
STEP 6
STEP 8
STEP 7
STEP 9
Related manuals for Toyota Camry HV 2018 Sedan Quick Reference Guide
Manualsnet FAQs
If you want to find out how the Camry HV Toyota works, you can view and download the Toyota Camry HV 2018 Sedan Quick Reference Guide on the Manualsnet website.
Yes, we have the Quick Reference Guide for Toyota Camry HV as well as other Toyota manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Reference Guide should include all the details that are needed to use a Toyota Camry HV. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Toyota Camry HV 2018 Sedan Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Toyota Camry HV 2018 Sedan Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Toyota Camry HV 2018 Sedan Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Toyota Camry HV 2018 Sedan Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Toyota Camry HV 2018 Sedan Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.