Toyota Sienna Display Navigation with Entune 2013 Minivan Instruction Manual PDF

00505-OMNAV-DOP12

Printed in U.S.A. 06/14

14-CAC-08141

CUSTOMER EXPERIENCE CENTER

1-800-331-4331

OWNERS MANUAL

DISPLAY NAVIGATION

WITH ENTUNE

A-15

1

TABLE OF CONTENTS

1 QUICK GUIDE 9

2 BASIC FUNCTION 25

3 NAVIGATION SYSTEM 49

4 PHONE 115

5 AUDIO SYSTEM 165

6 VOICE COMMAND SYSTEM 225

7 INFORMATION 237

8 APPS 245

9 PERIPHERAL MONITORING SYSTEM 257

APPENDIX 261

2

NAVIGATION SYSTEM OWNERS MANUAL

This manual explains the operation of the Navigation System. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The screen shots in this document and the actual screens of the navigation system differ depending on whether the functions and/or a contract existed and the map data available at the time of producing this document.

NAVIGATION SYSTEM The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense. Using these signals and other vehicle sensors, the system indicates your present position and assists in locating a desired destination. The navigation system is designed to select efficient routes from your present starting location to your destination. The system is also designed to direct you to a destination that is unfamiliar to you in an efficient manner. The system uses DENSO maps. The calculated routes may not be the shortest nor the least traffic congested. Your own personal local knowledge or short cut may at times be faster than the calculated routes. The navigation systems database includes Point of Interest categories to allow you to easily select destinations such as restaurants and hotels. If a destination is not in the database, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in when approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down. Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicles position depends on satellite conditions, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 113.

Introduction

3

IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention with the following marks.

CAUTION

This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others.

NOTICE

This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your vehicle and its equipment.

SYMBOLS USED IN ILLUSTRATIONS

Safety symbol The symbol of a circle with a slash through it means Do not, Do not do this, or Do not let this happen.

Arrows indicating operations

Indicates the action (pushing, turning, etc.) used to operate switches and other devices.

Indicates the outcome of an operation (e.g. a slot cover opens).

4

HOW TO READ THIS MANUAL

No. Name Description

Operational Outlines An outline of the operation is explained.

Main Operations The steps of an operation are explained.

Related Operations A main operations supplementary operations are described.

Information Useful information for the user is described.

5

SAFETY INSTRUCTION

To use this system in the safest possible manner, follow all the safety tips shown below. This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Navigation System Owners Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done.

CAUTION

For safety, the driver should not operate the navigation system while he/she is driving. Insufficient attention to the road and traffic may cause an accident.

While driving, be sure to obey the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street.

While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is safe. However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the drivers personal judgement. Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting the use of video and navigation screens next to the driver.

6

QUICK GUIDE

1. NAVIGATION OPERATION.............10 1. OVERVIEW BUTTON AND

GUIDANCE SCREEN................... 10 2. REGISTERING HOME ................. 12 3. REGISTERING PRESET

DESTINATIONS ........................... 14 4. OPERATION FLOW: GUIDING THE

ROUTE......................................... 16 5. SETTING HOME AS THE

DESTINATION.............................. 17

2. FUNCTION INDEX ..........................18 1. NAVIGATION SYSTEM FUNCTION

INDEX .......................................... 18

3. QUICK REFERENCE ......................20 1. Menu SCREEN .......................... 20 2. Destination SCREEN ................. 22 3. Setup SCREEN.......................... 24

2 BASIC FUNCTION

1. BASIC INFORMATION BEFORE OPERATION....................................26

1. INITIAL SCREEN.......................... 26 2. TOUCH SCREEN OPERATION.... 27 3. INPUTTING LETTERS AND

NUMBERS/LIST SCREEN OPERATION ................................ 28

4. SCREEN ADJUSTMENT.............. 31 5. MAP SCREEN OPERATION ........ 33

2. SETUP.............................................41 1. GENERAL SETTINGS.................. 41 2. VOICE SETTINGS ....................... 47

3 NAVIGATION SYSTEM

1. DESTINATION SEARCH.................51 1. DESTINATION SEARCH.............. 51 2. STARTING ROUTE GUIDANCE... 67

2. ROUTE GUIDANCE ........................70 1. ROUTE GUIDANCE SCREEN...... 70 2. TYPICAL VOICE GUIDANCE

PROMPTS.................................... 73 3. DISTANCE AND TIME TO

DESTINATION.............................. 75

4. SETTING AND DELETING DESTINATIONS ............................76

5. SETTING ROUTE .........................78

3. ADDRESS BOOK ...........................87 1. NAVIGATION SETTINGS ..............87

4. SETUP ..........................................102 1. DETAILED NAVIGATION

SETTINGS ..................................102 2. VEHICLE SETTINGS ..................109

5. GPS (GLOBAL POSITIONING SYSTEM)....................................... 113

1. LIMITATIONS OF THE NAVIGATION SYSTEM .....................................113

4 PHONE

1. PHONE OPERATION.................... 116 1. QUICK REFERENCE ..................116 2. PHONE (HANDS-FREE SYSTEM

FOR CELLULAR PHONE)...........118 3. REGISTER A Bluetooth

PHONE .......................................122 4. CALL ON THE Bluetooth

PHONE .......................................126 5. RECEIVE ON THE Bluetooth

PHONE .......................................132 6. TALK ON THE Bluetooth

PHONE .......................................133 7. Bluetooth PHONE MESSAGE

FUNCTION..................................135

2. SETUP ..........................................138 1. PHONE SETTINGS.....................138 2. Bluetooth SETTINGS ................155

TABLE OF CONTENTS

7

5 AUDIO SYSTEM

1. AUDIO SYSTEM OPERATION......167 1. QUICK REFERENCE ..................167 2. SOME BASICS............................168 3. RADIO OPERATION ...................173 4. HD Radio TECHNOLOGY

INFORMATION............................176 5. RADIO OPERATION (XM Satellite

Radio BROADCAST)*1 ................179 6. RADIO OPERATION (INTERNET

RADIO BROADCAST).................184 7. CD PLAYER OPERATION...........185 8. USB MEMORY OPERATION.......191 9. iPod OPERATION .......................195 10. Bluetooth AUDIO

OPERATION ...............................198 11. DVD PLAYER OPERATION (rear

seat entertainment system)*2 .......206 12. AUDIO REMOTE CONTROLS

(STEERING SWITCHES) ............214 13. AUDIO SYSTEM OPERATING

HINTS .........................................215

2. SETUP...........................................224 1. AUDIO SETTINGS ......................224

6 VOICE COMMAND SYSTEM

1. VOICE COMMAND SYSTEM OPERATION..................................226

1. VOICE COMMAND SYSTEM......226 2. NATURAL SPEECH INFORMATION

(ENGLISH ONLY)........................231 3. EXPANDED VOICE

COMMANDS ...............................232 4. COMMAND LIST.........................233

7 INFORMATION

1. INFORMATION DISPLAY .............238 1. MAP DATABASE VERSION AND

COVERAGE AREA......................238

2. NavTraffic FUNCTION OVERVIEW....................................241

1. NavTraffic ....................................241

8 APPS

1. ENTUNE-OVERVIEW ...................246 1. ENTUNE SERVICE .....................246 2. BEFORE USING ENTUNE..........248

2. ENTUNE OPERATION..................249 1. ACTIVATING APPS...................249 2. LINKING APPS AND NAVIGATION

LOCAL FUNCTION .....................252 3. INPUTTING KEYWORD

OPERATION ...............................254

9 PERIPHERAL MONITORING SYSTEM

1. REAR VIEW MONITOR SYSTEM........................................258

1. REAR VIEW MONITOR SYSTEM OPERATION*1.............................258

APPENDIX

1. SPECIFICATIONS.........................262

2. ALPHABETICAL INDEX...............263

1

2

3

4

5

6

7

8

9

*1: If equipped *2: Vehicles with rear seat entertainment system (OPTION)

8

9

1

QU IC

K G

U ID

E

1

QUICK GUIDE

1 NAVIGATION OPERATION

1. OVERVIEW BUTTON AND GUIDANCE SCREEN ................ 10

2. REGISTERING HOME ................. 12

3. REGISTERING PRESET DESTINATIONS......................... 14

4. OPERATION FLOW: GUIDING THE ROUTE............................... 16

5. SETTING HOME AS THE DESTINATION ........................... 17

2 FUNCTION INDEX

1. NAVIGATION SYSTEM FUNCTION INDEX..................... 18

3 QUICK REFERENCE

1. Menu SCREEN......................... 20

2. Destination SCREEN............... 22

3. Setup SCREEN ........................ 24

10

No. Name Function Page

North-up or heading-up symbol

This symbol indicates whether the map orientation is set to north-up or heading-up. Touching this symbol changes the map orientation. Both north-up and heading-up symbols display the vehicles direction as a letter (e.g. N for north).

40

Scale indicator This figure indicates the map scale. 39

Zoom out button Touch to reduce the map scale. 39

Off

Touch to obtain a broader view. Some of the buttons on the screen will not be displayed. They are displayed again by touching On

.

105

Mark Touch to register the current position or the cursor position as an address book entry. 34

Route Touch to change the route. 76, 78

Show on Map

Touch to browse information about guidance route, to set the POI (Point of Interest) icons to be displayed on the screen, or to record the route.

82, 242

Zoom in button Touch to magnify the map scale. 39

Map Mode Touch to display the Map Mode screen. 37

1. NAVIGATION OPERATION

1. OVERVIEW BUTTON AND GUIDANCE SCREEN

1. NAVIGATION OPERATION

11

1

QU IC

K G

U ID

E

No. Name Function Page

Distance and time to destination

Displays the distance, estimated travel and arrival time to the destination. 75

indicator This mark is displayed when information is received. 242

GPS mark (Global Positioning System)

Whenever the vehicle is receiving signals from the GPS, this mark is displayed. 113

MENU button* Press to display the Menu screen. 12, 14, 16, 17, 20, 51

MAP button Press to repeat a voice guidance, cancel the map scroll, start guidance or display the current position.

33

*: Press and hold the MENU button for 5 seconds or more to turn off the screen and restart the navigation system. Do this when the vehicle-mounted device response is extremely slow.

1. NAVIGATION OPERATION

12

1 Press the MENU button.

2 Touch Destination.

3 Touch Go Home.

If a home address has not been registered, it can be registered by touching Go Home .

4 Touch Yes.

5 There are 4 different methods to search your home. (See DESTINATION SEARCH on page 51.)

6 Touch Enter.

The Edit Home screen is displayed.

7 Touch OK.

Registration of home is complete. Home can also be registered by touching Navigation on the Setup screen. (See REGISTERING HOME on page 88.) The name, location, phone number and icon can be changed. (See EDITING HOME on page 89.)

2. REGISTERING HOME

1. NAVIGATION OPERATION

13

1

QU IC

K G

U ID

E

The registered points can be used on the Destination screen. (See DESTINATION SEARCH BY HOME on page 52.)

1. NAVIGATION OPERATION

14

1 Press the MENU button.

2 Touch Destination.

3 Touch one of the preset destination buttons.

A preset destination can be set to any preset destination button that has not yet been set.

4 Touch Yes.

5 There are 4 different methods to search preset destinations. (See DESTINATION SEARCH on page 51.)

6 Touch Enter.

The Edit Preset Destination screen is displayed.

7 Touch OK.

Registration of preset destinations is complete. Preset destinations can also be registered by touching Navigation on the Setup screen. (See REGISTERING PRESET DESTINATIONS on page 90.)

3. REGISTERING PRESET DESTINATIONS

1. NAVIGATION OPERATION

15

1

QU IC

K G

U ID

E

The name, location, phone number and icon can be changed. (See EDITING PRESET DESTINATIONS on page 91.) The registered points can be used on the Destination screen. (See DESTINATION SEARCH BY PRESET DESTINATIONS on page 52.)

1. NAVIGATION OPERATION

16

1 Press the MENU button.

2 Touch Destination.

3 There are 10 different methods to search destinations. (See DESTINATION SEARCH on page 51.)

Page 1

Page 2

4. OPERATION FLOW: GUIDING THE ROUTE

1. NAVIGATION OPERATION

17

1

QU IC

K G

U ID

E

1 Press the MENU button.

2 Touch Destination.

3 Touch Go Home.

Go Home can be used if your home address has been registered. (To register home, see REGISTERING HOME on page 88.) Your home address is set as the destination. The navigation system performs a search for the route.

4 Touch OK, and start driving.

Routes other than the one recommended can also be selected. (See STARTING ROUTE GUIDANCE on page 67.) Guidance to the destination is displayed on the screen and can be heard via voice guidance.

5. SETTING HOME AS THE DESTINATION

2. FUNCTION INDEX

18

Map

Displaying maps Page

Viewing the map screen 10

Displaying the current position 33

Viewing the current position vicinity map 33

Changing the scale 39

Changing the map orientation 40

Displaying Points of Interest 82

Displaying the estimated travel/arrival time to the destination 75

Selecting the map mode 37

Deleting map screen buttons 105

Displaying traffic information 241

Searching destinations Page

Searching the destination 51

Changing the selected search area 51

Operating the map location of the selected destination 67

Route guidance

Before starting route guidance Page

Setting the destination 67

Viewing alternative routes 68

Starting route guidance 67

Before starting or during route guidance Page

Viewing the route 67

Adding destinations 76

Changing the route 78

Displaying the estimated travel/arrival time to the destination 75

2. FUNCTION INDEX

1. NAVIGATION SYSTEM FUNCTION INDEX

2. FUNCTION INDEX

19

1

QU IC

K G

U ID

E

During route guidance Page

Pausing route guidance 81

Adjusting route guidance volume 48

Deleting the destination 65

Displaying the entire route map 79

Useful functions

Address book Page

Registering address book entries 92

Marking icons on the map 94

Information Page

Displaying vehicle maintenance 109

Hands-free system (for cellular phone) Page

Initiating Bluetooth 118

Making a call on a Bluetooth phone 126

Receiving a call on the Bluetooth phone 132

Voice command system Page

Operating the system with your voice 226

20

The Menu screen allows you to search for a destination, to use various functions, and to make various settings, as shown below.

No. Name Function Page

Radio Touch this switch to display the radio control screen. 173

Destination Touch this switch to display the Destination screen. 51

Phone Touch this switch to display the Telephone screen. 116

Display Touch to adjust the screen contrast and brightness, turn the display off, etc. 31

Setup Touch this switch to display the Setup screen. 87

3. QUICK REFERENCE

1. Menu SCREEN

3. QUICK REFERENCE

21

1

QU IC

K G

U ID

E

No. Name Function Page

Map Data Touch to display mapdata information. 238

Tarffic Incidents* Touch to display traffic incidents. 241

Apps Touch to display the Apps screen. 249

Media Touch this switch to display the media control screen. 170

*: This is displayed only when set to do so at the Traffic screen in the Apps menu.

3. QUICK REFERENCE

22

The Destination screen enables a destination search. Press the MENU button and touch Destination to display the Destination screen.

No. Name Function Page

Address Touch to input a house number and the street address using the input keys. 53

Point of Interest Touch to select one of the POIs that have already been stored in the systems database. 55

Previous Destinations

Touch to select a destination from any of the last 100 previously set destinations and from the previous starting point.

61

Address Book

Touch to select the desired location from a registered entry in Address book. (To register address book entries, see REGISTERING ADDRESS BOOK ENTRIES on page 92.)

61

Del.Dest. Touch to delete set destinations. 65

Emergency Touch to select one of the 4 categories of emergency service points that have already been stored in the systems database.

61

2. Destination SCREEN

3. QUICK REFERENCE

23

1

QU IC

K G

U ID

E

No. Name Function Page

Intersection & Freeway

Touch to enter the names of two intersecting streets or a freeway (interstate) entrance or exit. This is helpful if only the general vicinity, not the specific address, is known.

62

Map Touch to enable setting a destination by touching a location on the map screen. 65

Coordinates Touch to enter latitude and longitude coordinates. 65

Preset destination buttons

Touch to select one of the 5 preset destination points as a destination. If a preset destination point has not been registered, a message will be displayed asking if it is desirable to set a destination to the preset screen button. (To register a preset destination, see REGISTERING PRESET DESTINATIONS on page 90.)

52

Go Home

Touch to select your personal home address without having to enter the address each time. If a home address has not been registered, a message will be displayed and the setting screen will automatically appear. (To register home, see REGISTERING HOME on page 88.)

52

3. QUICK REFERENCE

24

The items shown on the Setup screen can be set. Press the MENU button and touch Setup to display the Setup screen.

No. Name Function Page

General Touch to change the selected language, operation sound settings, automatic screen change, etc.

41

Voice Touch to set the voice guidance settings. 47

Navigation Touch to access the page which enables the setting of the average cruising speed, displayed screen contents, POI categories, etc.

87

Vehicle Touch to set maintenance information. 109

Audio Touch to set iPod and HD Radio channel. 224

Bluetooth* Touch to set Bluetooth phones and Bluetooth audio devices. 155

Phone Touch to set the phone sound, phone book and message settings. 138

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

3. Setup SCREEN

25

1

2

BA SIC

FU N

C TIO

N

2

BASIC FUNCTION

1 BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN ......................... 26

2. TOUCH SCREEN OPERATION ... 27

3. INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION .............................. 28

4. SCREEN ADJUSTMENT ............. 31 SCREEN SETTINGS

ADJUSTMENT....................... 31

5. MAP SCREEN OPERATION........ 33 CURRENT POSITION

DISPLAY................................ 33 SCREEN SCROLL

OPERATION .......................... 33 SWITCHING THE SCREENS..... 37 MAP SCALE............................... 39 ORIENTATION OF THE MAP..... 40 STANDARD MAP ICONS........... 40

2 SETUP

1. GENERAL SETTINGS ................. 41 SCREENS FOR GENERAL

SETTINGS............................. 41

2. VOICE SETTINGS........................ 47 SCREEN FOR VOICE

SETTINGS............................. 47

26

1 When the POWER <ENGINE START STOP> switch is in ACCESSORY or ON mode, the initial screen will be displayed and the system will begin operating. (Vehicles with a smart key system) When the engine switch is in the ACC or ON position, the initial screen will be displayed and the system will begin operating. (Vehicles without a smart key system)

CAUTION

When the vehicle is stopped with the hybrid system operating , always apply the parking brake for safety.

After a few seconds, the CAUTION screen will be displayed.

After about 5 seconds, the CAUTION

screen automatically switches to the map screen. (If a button other than the MAP button is pressed, the functions corresponding screen will be displayed.)

MAINTENANCE INFORMATION This system reminds users when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the Maintenance Reminder screen will be displayed when the navigation system is turned on.

This screen goes off if the screen is not operated for several seconds.

To prevent this screen from being displayed again, touch Do Not Display This Message Again .

To register maintenance information, see MAINTENANCE on page 109.

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

1. BASIC INFORMATION BEFORE OPERATION

27

1

2

BA SIC

FU N

C TIO

N

This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.) To prevent damaging the screen, lightly touch the screen buttons with your finger.

When a screen button is touched, a

beep sounds. (To set the beep sound, see on page 41.)

INFORMATION

Do not use objects other than your finger to touch the screen.

If the system does not respond to touching a screen button, move your finger away from the screen and then touch it again.

Dimmed screen buttons cannot be operated.

Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen.

The displayed image may become darker and moving images may be slightly distorted when the screen is cold.

In extremely cold conditions, the map may not be displayed and the data input by a user may be deleted. Also, the screen buttons may be harder than usual to depress.

When you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the Display screen or take off your sunglasses.

2. TOUCH SCREEN OPERATION

1. BASIC INFORMATION BEFORE OPERATION

28

When searching for an address or name, or entering data, letters and numbers can be input via the screen.

Keyboard layout can be changed. (See

SELECTING A KEYBOARD LAYOUT on page 44.)

TO INPUT LETTERS AND NUMBERS

1 Touch A-Z to display the alphabet keys.

2 Touch the keys directly to enter letters or numbers.

: Touch to erase one character.

Touch and hold to continue erasing characters.

On certain letter entry screens, letters can be entered in upper or lower case.

IconFunction

Touch to enter in lower case.

Touch to enter in upper case.

TO INPUT SYMBOLS

1 Touch Other to display symbol keys.

2 Touch the symbol keys directly to enter symbols.

: Touch to erase one symbol. Touch

and hold to continue erasing symbols.

3. INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION

1. BASIC INFORMATION BEFORE OPERATION

29

1

2

BA SIC

FU N

C TIO

N

TO DISPLAY THE LIST

1 Touch OK to search for an address or a name.

Matching items from the database are

listed even if the entered address or name is incomplete.

The list will be displayed automatically if the maximum number of characters is entered or the number of matching items is 5 or less.

INFORMATION The number of matching items is shown

on the right side of the screen. If the number of matching items is more than 999, the system displays on the screen.

LIST SCREEN OPERATION

When a list is displayed, use the appropriate screen button to scroll through the list.

IconFunction

Touch to skip to the next or previous page. Touch and hold or to scroll through the displayed list.

This indicates the displayed screens position.

If appears to the right of an item name, the complete name is too long to display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name.

1. BASIC INFORMATION BEFORE OPERATION

30

SORTING

The order of a list displayed on the screen can be rearranged.

1 Touch Sort .

2 Touch the desired sorting criteria.

Screen buttonFunction

Distance Touch to sort in order of distance from the current position.

Date Touch to sort in order of date.

Category Touch to sort in order of category.

Icon Touch to sort in order of icon.

Name Touch to sort in order of name.

1. BASIC INFORMATION BEFORE OPERATION

31

1

2

BA SIC

FU N

C TIO

N

The contrast and brightness of the screen display and the image the camera displays can be adjusted. The display can also be turned off, and/or changed to either day or night mode.

SCREEN SETTINGS ADJUSTMENT

ADJUSTING SCREEN DISPLAY AND CAMERA SETTINGS

1 Press the MENU button.

2 Touch Display .

Adjusting the screen display

Camera * : Touch to adjust the image the camera displays.

Adjusting the image the camera displays*

MapMenu : Touch to return to the screen display settings. *: If equipped

4. SCREEN ADJUSTMENT

1. BASIC INFORMATION BEFORE OPERATION

32

CONTRAST AND BRIGHTNESS ADJUSTMENT

The contrast and brightness of the screen can be adjusted according to the brightness of your surroundings. The display can also be turned off.

1 Touch < or > to select the desired function (Contrast or Brightness).

2 Touch the desired screen button to adjust contrast and brightness.

Screen buttonFunction

Contrast +

Touch to strengthen the contrast of the screen.

Contrast -

Touch to weaken the contrast of the screen.

Brightness + Touch to brighten the screen.

Brightness - Touch to darken the screen.

3 After adjusting the screen, touch OK .

The screen goes off when Screen Off is touched. To turn the Display screen back on, press any button. The selected screen appears.

CHANGING BETWEEN DAY AND NIGHT MODE

Depending on the position of the headlight switch, the screen changes to day or night mode.

1 To display the screen in day mode, even with the headlight switch on, touch Day Mode for brightness and contrast control.

However, if the brightness of the

instrument panel lights is set to the brightest setting, mode switching cannot be performed. It remains in day mode. In this case, Day Mode is not shown on the screen.

INFORMATION

If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the hybrid system turned off.

1. BASIC INFORMATION BEFORE OPERATION

33

1

2

BA SIC

FU N

C TIO

N

CURRENT POSITION DISPLAY

When starting the navigation system, the current position is displayed first. This screen displays the current position and a map of the surrounding area.

The current position mark ( ) appears in

the center or bottom center of the map screen.

A street name will appear on the bottom of the screen, depending on the scale of the map ( ).

The screen can be returned to this map screen that shows the current position at any time, from any screen by pressing the MAP button.

To correct the current position manually, see page 105.

INFORMATION

While driving, the current position mark is fixed on the screen and the map moves.

The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS.

After 12-volt battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed.

SCREEN SCROLL OPERATION

When any point on the map is touched, that point moves to the center of the screen and is shown by the cursor mark ( ).

Use the scroll feature to move the desired

point to the center of the screen for looking at a point on the map that is different from the current position.

If a finger touches and holds the map screen, it will continue scrolling in that direction until the finger is removed.

A street name, city name, etc. of the touched point will be shown, depending on the scale of the map ( ). Distance from the current position to will also be shown ( ).

After the screen is scrolled, the map remains centered at the selected location until another function is activated. The current position mark will continue to move along your actual route and may move off the screen. When the MAP button is pressed, the current position mark returns to the center of the screen and the map moves as the vehicle proceeds along the designated route.

When the scroll feature is used, the current position mark may disappear from the screen. Press the MAP button to display the current position on the map screen.

5. MAP SCREEN OPERATION

1. BASIC INFORMATION BEFORE OPERATION

34

TO SET THE CURSOR POSITION AS A DESTINATION

A specific point on the map can be set as a destination using the scroll function.

1 Touch Enter .

The screen changes and displays the map

location of the selected destination and the route preference. (See STARTING ROUTE GUIDANCE on page 67.)

TO REGISTER THE CURSOR POSITION AS AN ADDRESS BOOK ENTRY

Address book entry registration enables easy access to a specific point.

1 Touch Mark .

2 This screen is displayed.

The registered point is shown by on

the map.

To change the icon or name, etc., see EDITING ADDRESS BOOK ENTRIES on page 93.

INFORMATION

Up to 100 address book entries can be registered. If there is an attempt to register more than 100 address book entries, an error message will appear.

TO SEE INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET

To display information about an icon, set

the cursor on it.

1. BASIC INFORMATION BEFORE OPERATION

35

1

2

BA SIC

FU N

C TIO

N

POI INFORMATION When the cursor is set on a POI icon, the name and Info are displayed at the top of the screen.

1 Touch Info .

2 Information such as the name, address, position and phone number are displayed.

If Enter is touched, the cursor

position will be set as a destination. If a destination has already been set,

Enter and Add to Route will be displayed.

Enter : Touch to delete the existing destination(s) and set a new one. Add to Route : Touch to add a destination. To register this POI as an address book

entry, touch Mark . (See REGISTERING ADDRESS BOOK ENTRIES on page 92.)

If is touched, the registered phone number can be called.

The desired POI can be displayed on the map screen. (See SHOW ON MAP on page 82.)

ADDRESS BOOK ENTRY INFORMATION

When the cursor is set on an address book entry icon, the name and Info are displayed at the top of the screen.

1 Touch Info .

2 Information such as the name, address, position and phone number are displayed.

If Enter is touched, the cursor position will be set as a destination.

If a destination has already been set, Enter and Add to Route will be displayed.

Enter : Touch to delete the existing destination(s) and set a new one. Add to Route : Touch to add a destination. To edit an address book entry, touch

Edit . (See EDITING ADDRESS BOOK ENTRIES on page 93.)

To delete an address book entry, touch Delete .

If is touched, the registered phone number can be called.

1. BASIC INFORMATION BEFORE OPERATION

36

DESTINATION INFORMATION When the cursor is set on a destination icon, the name and Info are displayed on the top of the screen.

1 Touch Info .

2 Information such as the name, address, position and phone number are displayed.

To delete a destination, touch Delete .

If is touched, the registered phone number can be called.

NavTraffic TEXT INFORMATION When the NavTraffic icon on the map screen is touched, the NavTraffic information bar will appear on the upper part of the screen.

1 Touch Info .

2 Traffic information is displayed on the screen.

To display detailed traffic event information,

touch Detail .

1. BASIC INFORMATION BEFORE OPERATION

37

1

2

BA SIC

FU N

C TIO

N

SWITCHING THE SCREENS Any of the screen configurations can be selected.

1 Touch Map Mode .

2 Touch the screen buttons to select the desired configuration.

Depending on the conditions, certain

screen configuration buttons cannot be selected.

Screen button Function

Map Only Touch to display the single map screen. (See page 38.)

Turn List Touch to display the turn list screen. (See page 72.)

Intersection

Touch to display the intersection guidance screen or the guidance screen on the freeway. (See page 71.)

Screen button Function

Audio Touch to display the audio screen. (See page 38.)

Other Information

Touch to display the following 4 screen configurations: Dual map, Compass, Turn-by-Turn Arrow and Freeway Exit List.

Dual map Touch to display the dual map screen. (See page 38.)

Compass Touch to display the compass mode screen. (See page 39.)

Turn-by-Turn Arrow

Touch to display the turn-by-turn arrow screen. (See page 72.)

Freeway Exit List

Touch to display the freeway exit list screen. (See page 70.)

1. BASIC INFORMATION BEFORE OPERATION

38

SCREEN CONFIGURATIONS

MAP ONLY This is a regular map screen.

The screen shows the single map.

While on a different screen, touching Map Only will display the single map screen.

AUDIO The audio screen and the map screen are displayed.

Information on the current radio station or

track is displayed.

If a different screen is displayed, touch Audio on the Map Mode screen.

For audio system operation, refer to AUDIO SYSTEM OPERATION. (See page 167.)

DUAL MAP The map screen can be split into two.

This screen shows the dual map. The map

on the left is the main map.

While on a different screen, touching Dual map will display the dual map screen.

EDITING RIGHT MAP The right side map can be edited by touching any point on the right side map.

1 Touch the desired screen button.

The following procedures can be

performed on this screen:

No. Function

Changing the orientation of the map

Displaying POI icons

Showing NavTraffic information (See page 242.)

1. BASIC INFORMATION BEFORE OPERATION

39

1

2

BA SIC

FU N

C TIO

N

No. Function

Changing the map scale

2 Touch OK when editing is completed.

The screen returns to the dual map screen.

COMPASS The current position is indicated with a compass.

Information about the destination, current

position and a compass is displayed on the screen.

While on a different screen, touching Compass will display the compass mode screen.

INFORMATION

The destination mark is displayed in the direction of the destination. When driving, refer to the longitude and latitude coordinates, and the compass, to make sure that the vehicle is headed in the direction of the destination.

When the vehicle travels out of the coverage area, the guidance screen changes to the compass mode screen.

MAP SCALE

1 Touch or to change the scale of the map screen.

The scale bar and indicator at the bottom

of the screen indicate the map scale menu. The scale range is from 150 feet (50 m) to 250 miles (400 km).

Touch and hold or to continue changing the scale of the map screen.

The scale of the map screen can be changed by touching the scale bar directly. This function is not available while driving.

INFORMATION

The map scale is displayed under the north-up or heading-up symbol at the top left of the screen.

When the map scale is at the maximum range of 250 miles (400 km), is not shown. When the map scale is at the minimum range of 150 feet (50 m), is not shown.

1. BASIC INFORMATION BEFORE OPERATION

40

ORIENTATION OF THE MAP The orientation of the map can be changed from north-up to heading-up by touching the orientation symbol at the top left of the screen.

1 Touch or .

North-up screen

Heading-up screen

: North-up symbol

Regardless of the direction of vehicle travel, north is always up.

: Heading-up symbol The direction of vehicle travel is always up. Both the north-up and heading-up

symbols display the vehicles direction as a letter (e.g. N for north).

STANDARD MAP ICONS

IconName

Island

Park

Industry

Business facility

Airport

Military

University

Hospital

Stadium

Shopping mall

Golf

2. SETUP

41

1

2

BA SIC

FU N

C TIO

N

Used for language selection and the on/off settings of operation sounds and automatic screen change.

1 Press the MENU button.

2 Touch Setup.

3 Touch General .

4 Touch the items to be set.

5 Touch Save .

SCREENS FOR GENERAL SETTINGS

On this screen, the following functions can

be performed:

No. Function

Touch to change the time zone and select On or Off for daylight saving time. (See SYSTEM TIME SETTINGS on page 42.)

Touch to change the language. (See SELECTING A LANGUAGE on page 43.)

Touch to change the distance unit. (See UNIT OF MEASUREMENT on page 43.)

Touch to turn the sound beeps On or Off .

Touch to change the screen button color. (See SELECTING A BUTTON COLOR on page 44.)

Touch to change the keyboard layout. (See SELECTING A KEYBOARD LAYOUT on page 44.)

2. SETUP

1. GENERAL SETTINGS

2. SETUP

42

No. Function

Touch to select On or Off for automatic screen changes from the audio screen to the map screen. If On is selected, the screen will automatically return to the map screen from the audio screen after 20 seconds.

Touch to delete personal data. (See DELETING PERSONAL DATA on page 45.)

Touch to display the gracenote database version.

SYSTEM TIME SETTINGS Used for changing time zones and the on/off settings of daylight saving time.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch System Time .

5 Touch the items to be set.

On this screen, the following functions can

be performed:

No. Function

Touch to change the time zone. (See TIME ZONE on page 42.)

Touch to select On or Off for daylight saving time.

6 Touch Save .

TIME ZONE A time zone can be selected and GMT can be set.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch System Time on the General Settings screen.

5 Touch Time Zone .

2. SETUP

43

1

2

BA SIC

FU N

C TIO

N

6 Touch the desired time zone.

If Other is touched, the zone can be

adjusted manually. Touch + or - to adjust the time zone and then touch OK .

7 Touch Save . SELECTING A LANGUAGE The language can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch Language .

5 Touch the desired screen button.

6 Touch Yes . The previous screen will be displayed.

7 Touch Save . UNIT OF MEASUREMENT Distance unit can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch Unit of Measurement .

2. SETUP

44

5 Touch km or mile .

The previous screen will be displayed.

6 Touch Save . This function is available only in English

or Spanish. To change language, See SELECTING A LANGUAGE on page 43.

SELECTING A BUTTON COLOR

The color of the screen buttons can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch Button Color .

5 Touch the desired screen button color.

The previous screen will be displayed.

6 Touch Save .

SELECTING A KEYBOARD LAYOUT

Keyboard layout can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch Keyboard Layout .

2. SETUP

45

1

2

BA SIC

FU N

C TIO

N

5 Touch ABC or QWERTY of Keyboard Layout to select a keyboard layout.

The previous screen will be displayed.

6 Touch Save .

LAYOUT TYPE

ABC type

QWERTY type

DELETING PERSONAL DATA

1 Press the MENU button.

2 Touch Setup .

3 Touch General on the Setup screen.

4 Touch Delete Personal Data .

5 Touch Delete .

6 Touch Yes .

2. SETUP

46

The following personal data can be deleted or returned to their default settings: Maintenance conditions Address book Areas to avoid Previous points Route guidance Route trace Phonebook data Call history data Speed dial data Bluetooth phone data Phone sound settings Phone display settings Message settings Audio setting Bluetooth audio setting

INFORMATION

This function is not available while driving.

2. SETUP

47

1

2

BA SIC

FU N

C TIO

N

Voice guidance can be set.

1 Press the MENU button.

2 Touch Setup .

3 Touch Voice .

4 Touch the items to be set.

5 Touch Save .

SCREEN FOR VOICE SETTINGS

On this screen, the following functions can

be performed:

No. Function

The voice guidance volume can be adjusted or switched off. (See VOICE VOLUME on page 48.)

Voice guidance during route guidance can be set to On or Off .

Voice guidance during audio system use can be set to On or Off .

Voice recognition prompts can be set to On or Off . This setting can also be changed on the Shortcut Menu screen. (See VOICE COMMAND SYSTEM OPERATION on page 226.)

When On is selected, the audio system can be operated using voice commands.

2. VOICE SETTINGS

2. SETUP

48

No. Function

When using the traffic information function, voice guidance can be set to On or Off . (See TRAFFIC INCIDENT WARNING on page 48.)

To reset all setup items, touch Default . VOICE VOLUME The voice guidance volume can be adjusted or switched off.

1 Press the MENU button.

2 Touch Setup .

3 Touch Voice on the Setup screen.

4 Select the desired level by touching the appropriate number.

If voice guidance is not needed, touch

Off to disable the feature.

5 Touch Save . TRAFFIC INCIDENT WARNING Traffic congestion information can be received via voice guidance while being guided to the desired destination.

1 Press the MENU button.

2 Touch Setup .

3 Touch Voice on the Setup screen.

4 Touch On of Traffic Incident Warning.

5 Touch Save .

INFORMATION When the Traffic Information indicator is

dimmed, Avoid Traffic, Traffic Incident Warning and Show Free Flowing Traffic will not operate.

49

1

2

3

NAVIG ATIO

N SYSTEM

3

NAVIGATION SYSTEM

1 DESTINATION SEARCH

1. DESTINATION SEARCH..............51 SELECTING THE SEARCH

AREA .....................................51 DESTINATION SEARCH BY

HOME ....................................52 DESTINATION SEARCH BY

PRESET DESTINATIONS......52 DESTINATION SEARCH BY

Address................................53 DESTINATION SEARCH BY

Point of Interest....................55 DESTINATION SEARCH BY

Previous Destinations ..........61 DESTINATION SEARCH BY

Address Book.......................61 DESTINATION SEARCH BY

Emergency...........................61 DESTINATION SEARCH BY

Intersection & Freeway ........62 DESTINATION SEARCH BY

Map......................................65 DESTINATION SEARCH BY

Coordinates..........................65 DELETING SET

DESTINATIONS .....................65

2. STARTING ROUTE GUIDANCE.................................67

2 ROUTE GUIDANCE

1. ROUTE GUIDANCE SCREEN ..... 70

2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 73

3. DISTANCE AND TIME TO DESTINATION ........................... 75

4. SETTING AND DELETING DESTINATIONS......................... 76 ADDING DESTINATIONS .......... 76 REORDERING

DESTINATIONS..................... 76 DELETING DESTINATIONS ...... 77

5. SETTING ROUTE......................... 78 DETOUR SETTING.................... 78 ROUTE OVERVIEW................... 79 ROUTE PREFERENCE ............. 80 PAUSING AND RESUMING

GUIDANCE............................ 81 SHOW ON MAP ......................... 82 ROUTE TRACE.......................... 85

50

3 ADDRESS BOOK

1. NAVIGATION SETTINGS .............87 SETTING UP THE Home .........87 SETTING UP THE Preset

Destinations ..........................89 SETTING UP THE Address

Book......................................92 SETTING UP THE Areas to

Avoid .....................................96 DELETING PREVIOUS

DESTINATIONS ...................100 4 SETUP

1. DETAILED NAVIGATION SETTINGS................................102 SCREENS FOR NAVIGATION

SETTINGS ...........................102

2. VEHICLE SETTINGS..................109 MAINTENANCE........................109

5 GPS (GLOBAL POSITIONING SYSTEM)

1. LIMITATIONS OF THE NAVIGATION SYSTEM ............113

1. DESTINATION SEARCH

51

1

2

3

NAVIG ATIO

N SYSTEM

1 Press the MENU button.

2 Touch Destination .

3 This screen is displayed.

One of 10 different methods can be used

to search a destination. (See pages 52 through 65.)

INFORMATION

When searching a destination, the response to the screen button may be slow.

SELECTING THE SEARCH AREA

The selected state (province) can be changed to set a destination from a different state (province) by using Address, Point of Interest or Intersection & Freeway.

1 Touch Change State/Province to display a list of the states/provinces/territories of the United States and Canada.

For map database information and updates, see MAP DATABASE VERSION AND COVERAGE AREA on page 238.)

If a state (province) has not been selected yet, Select State/Province is displayed.

2 Touch the desired state (province).

The previous screen will be displayed.

1. DESTINATION SEARCH

1. DESTINATION SEARCH

1. DESTINATION SEARCH

52

DESTINATION SEARCH BY HOME

1 Press the MENU button.

2 Touch Destination .

3 Touch Go Home .

Your home address is set as the

destination. The navigation system performs a search for the route.

4 Touch OK . To use this function, it is necessary to

set a home address. (To register home , see page 88.)

INFORMATION

If a home address has not been registered, a message confirming if it is desirable to set a home will be displayed, and the setting screen will appear.

Guidance starts from the current position to the set home address if OK is touched even while driving.

DESTINATION SEARCH BY PRESET DESTINATIONS

1 Press the MENU button.

2 Touch Destination .

3 Touch any of the preset destination buttons ( 1 - 5 ) on the Destination screen.

The selected preset destination point is

set as the destination. The navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

4 Touch OK . To use this function, it is necessary to

set preset destinations to the preset screen buttons ( 1 - 5 ). (See REGISTERING PRESET DESTINATIONS on page 90.)

INFORMATION

If a preset destination point has not been registered, a message confirming if it is desirable to set a preset destination will be displayed, and the setting screen will appear.

Guidance starts from the current position to the preset destination point if OK is touched even while driving.

1. DESTINATION SEARCH

53

1

2

3

NAVIG ATIO

N SYSTEM

DESTINATION SEARCH BY Address

There are 2 methods to search a destination by address: (a)Search by city (b)Search by street address

1 Press the MENU button.

2 Touch Destination .

3 Touch Address on the Destination screen.

4 Touch a screen button to select the desired search method.

SELECTING A CITY TO SEARCH

1 Press the MENU button.

2 Touch Destination .

3 Touch Address on the Destination screen.

4 Touch City .

5 Input a city name.

6 Touch the screen button of the desired city name from the displayed list.

7 Input the street name and touch OK .

8 When the desired street name is found, touch the corresponding screen button.

1. DESTINATION SEARCH

54

When the desired street name is selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

9 Input a house number.

If the same address exists in more than

one city, the current screen changes to the address list screen.

SEARCHING FROM THE LAST 5 CITIES

1 Touch Last 5 Cities .

2 Touch the screen button of the desired city name from the displayed list.

The current screen changes to the screen for inputting a street name. (See SELECTING A CITY TO SEARCH on page 53.)

INFORMATION

If the navigation system has never been used, this function will not be available.

SEARCH BY STREET ADDRESS

1 Press the MENU button.

2 Touch Destination .

3 Touch Address on the Destination screen.

4 Touch Street Address .

5 Touch numbers directly on the screen to input the house number.

After inputting the house number, touch

OK to display the screen for inputting the street name.

1. DESTINATION SEARCH

55

1

2

3

NAVIG ATIO

N SYSTEM

6 Input the street name and touch OK .

7 When the desired street name is found, touch the corresponding screen button.

When the desired street name is selected,

the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

If the same address exists in more than 1 city, a screen requesting the city name to be input or selected will be displayed.

8 Input a city name.

9 Touch the screen button of the desired city name from the displayed list.

INFORMATION

A street name can be searched using only the body part of its name.

For example: S WESTERN AVE A search can be performed by

inputting S WESTERN AVE, WESTERN AVE or WESTERN.

DESTINATION SEARCH BY Point of Interest

There are 3 methods to search a destination by Points of Interest: (a) Search by name (b) Search by category (c) Search by phone #

1 Press the MENU button.

2 Touch Destination .

3 Touch Point of Interest on the Destination screen.

1. DESTINATION SEARCH

56

4 Touch a screen button to select the desired search method.

SEARCH BY Name

1 Press the MENU button.

2 Touch Destination .

3 Touch Point of Interest on the Destination screen.

4 Touch Name on the Point of Interest screen.

5 Input the name of the POI.

6 Touch the screen button of the desired destination.

When the desired destination is selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

When inputting the name of a specific Point of Interest, and there are 2 or more sites with the same name, the list screen is displayed.

7 Touch the screen button of the desired destination.

If the same name exists in more than one

city, a search can be performed more easily using City or Category . (See SELECTING A CITY TO SEARCH on page 53 and SELECTING FROM THE CATEGORIES on page 57.)

The desired Point of Interest can be

displayed on the map screen. (See DISPLAY POI ICONS on page 82.)

INFORMATION

To search for a facility name using multiple search words, put a space between each word.

1. DESTINATION SEARCH

57

1

2

3

NAVIG ATIO

N SYSTEM

SELECTING A CITY TO SEARCH

1 Touch City .

2 Input the city name.

To cancel the city setting, touch Any

City .

3 Touch the screen button of the desired city name from the displayed list.

SELECTING FROM THE CATEGORIES

1 Touch Category .

2 Touch the screen button of the desired category.

If the desired POI category is on the

screen, touch its screen button to display a detailed list of the POI category.

If the desired POI category is not on the screen, touch List All Categories to list all POI categories.

When the desired category is touched, the

POI name list screen is displayed.

1. DESTINATION SEARCH

58

SEARCH BY Category The destination can be set by touching the search point and the POI category.

1 Press the MENU button.

2 Touch Destination .

3 Touch Point of Interest on the Destination screen.

4 Touch Category .

5 This screen is displayed.

Set the search point by one of the

following methods: Set the search point from near the

current position Set the search point from along the

selected route Set the search point from near a city

center Set the search point from near a

destination

INFORMATION The names of POIs located within

approximately 200 miles (320 km) from the selected search point can be displayed.

SETTING THE SEARCH POINT FROM NEAR HERE

1 Touch Near Here . The search point is set at the current

position, and the POI Category screen will be displayed. (See page 59.)

SETTING THE SEARCH POINT FROM ALONG MY ROUTE

1 Touch Along My Route . The search point is set and the POI

Category screen will be displayed. (See page 59.)

SETTING THE SEARCH POINT FROM NEAR CITY CENTER

1 Touch Near a City Center in XX* .

2 Input the city center name.

*: XX represents the selected search area name.

1. DESTINATION SEARCH

59

1

2

3

NAVIG ATIO

N SYSTEM

3 Touch the screen button of the desired city center name.

The search point is set and the POI

Category screen will be displayed. (See page 59.)

SELECTING FROM THE LAST 5 CITIES

1 Touch Near a City Center in XX* .

2 Touch Last 5 Cities .

3 Touch the screen button of the desired city center name.

The search point is set and the POI

Category screen will be displayed. (See page 59.) *: XX represents the selected search area name.

SETTING THE SEARCH POINT FROM NEAR A DESTINATION

1 Touch Near a Destination .

2 Touch the screen button of the desired destination.

The search point is set and the POI

Category screen will be displayed. (See page 59.)

TO SEARCH POIs NEAR THE SEARCH POINT

When the search point is set, the POI Category screen will be displayed.

1 Touch the desired POI category.

If the desired POI category is not on the

screen, touch List All Categories to list all POI categories.

If Favorite POI Categories is touched, a search can be performed using the 6 POIs that have been previously set. For more details, see POI CATEGORY CHANGE (SELECT POI ICONS) on page 105.

1. DESTINATION SEARCH

60

2 Touch the desired POI category from the list.

3 Touch the screen button of the desired item.

When the desired item is selected, the

Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

SEARCH BY Phone #

1 Press the MENU button.

2 Touch Destination .

3 Touch Point of Interest on the Destination screen.

4 Touch Phone # on the Point of Interest screen.

5 Input a phone number.

6 After inputting a phone number, touch OK .

When a phone number is input, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

If there is more than one site with the same number, the following screen will be displayed.

To set an address book entry as a destination using the phone number, the number must already be registered with the address book entry. (See page 92.)

INFORMATION

If there is no match for the phone number input, a list of identical numbers with different area codes will be displayed.

1. DESTINATION SEARCH

61

1

2

3

NAVIG ATIO

N SYSTEM

DESTINATION SEARCH BY Previous Destinations

1 Press the MENU button.

2 Touch Destination .

3 Touch Previous Destinations on the Destination screen.

4 Touch the screen button of the desired destination.

The previous starting point and up to 100

previously set destinations are displayed on the screen.

Delete : Touch to delete the previous destination. (To delete previous destinations, see page DELETING SET DESTINATIONS on page 65.) When the desired destination is selected,

the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

The list of previous destinations can also be deleted by touching Delete Previous Dest. on the Navigation Settings screen when the vehicle is stopped. (See DELETING PREVIOUS DESTINATIONS on page 100.)

DESTINATION SEARCH BY Address Book

1 Press the MENU button.

2 Touch Destination .

3 Touch Address Book on the Destination screen.

4 Touch the screen button of the desired address book entry.

A list of registered address book entries is

displayed. Options : Touch to register or edit address book entries. (See page 93.) When the desired address book entry is

selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

DESTINATION SEARCH BY Emergency

1 Press the MENU button.

2 Touch Destination .

3 Touch Emergency on the Destination screen.

The display changes to a screen to select police stations, dealers, hospitals or fire stations.

1. DESTINATION SEARCH

62

4 Touch the desired emergency category.

The selected emergency category is

displayed.

5 Touch the screen button of the desired destination.

When the desired destination entry is

selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

INFORMATION

The navigation system does not guide in areas where route guidance is unavailable. (See page 114.)

The emergency function can be used even while driving.

While driving, only the currently displayed items and the items on the next page can be viewed.

DESTINATION SEARCH BY Intersection & Freeway

There are 2 methods to search a destination by Intersection & Freeway: (a) Search by intersection (b) Search by freeway

1 Press the MENU button.

2 Touch Destination .

3 Touch Intersection & Freeway on the second page of the Destination screen.

4 Touch a screen button to select the desired method.

1. DESTINATION SEARCH

63

1

2

3

NAVIG ATIO

N SYSTEM

SEARCH BY Intersection

1 Press the MENU button.

2 Touch Destination .

3 Touch Intersection & Freeway on the second page of the Destination screen.

4 Touch Intersection on the Intersection & Freeway screen.

5 Input the name of the first intersecting street which is located near the destination to be set, and touch OK .

6 Touch the screen button of the desired item.

7 Input the name of the second intersecting street.

8 Touch the screen button of the desired item.

When the desired item is selected, the

Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

INFORMATION

If the same 2 streets cross at more than

one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and the route preference. (See STARTING ROUTE GUIDANCE on page 67.)

1. DESTINATION SEARCH

64

SEARCH BY Freeway

1 Press the MENU button.

2 Touch Destination .

3 Touch Intersection & Freeway on the second page of the Destination screen.

4 Touch Freeway Entrance/Exit on the Intersection & Freeway screen.

5 Input a freeway name.

6 Touch the screen button of the desired freeway.

7 Either a freeway Entrance or Exit can be selected.

8 Input a freeway entrance or exit name, and touch OK .

9 Touch the screen button of the desired entrance or exit name.

When the desired entrance or exit is

selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

INFORMATION

Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination. Freeways and interstates use an I (I-405). US highways use the state designation before the number (CA-118).

1. DESTINATION SEARCH

65

1

2

3

NAVIG ATIO

N SYSTEM

DESTINATION SEARCH BY Map

1 Press the MENU button.

2 Touch Destination .

3 Touch Map on the second page of the Destination screen.

4 Scroll the map to the desired point.

5 Touch Go to . The navigation system performs a search

for the route. (See STARTING ROUTE GUIDANCE on page 67.)

Guidance starts if OK is touched even while driving. However, the cursor cannot be moved.

DESTINATION SEARCH BY Coordinates

1 Press the MENU button.

2 Touch Destination .

3 Touch Coordinates on the second page of the Destination screen.

4 Input the latitude and the longitude.

5 After inputting the latitude and longitude, touch OK.

When the desired screen button is selected, the Confirm Destination screen may be displayed. If Go is touched on the Confirm Destination screen, the navigation system performs a search for the route. (See STARTING ROUTE GUIDANCE on page 67.)

DELETING SET DESTINATIONS

A set destination can be deleted.

1 Press the MENU button.

2 Touch Destination .

3 Touch Del.Dest. on the Destination screen.

When more than one destination is set, a list will be displayed on the screen.

4 Touch the destination to be deleted.

Delete All : Touch to delete all destinations on the list.

1. DESTINATION SEARCH

66

5 Touch Yes to delete the destination(s).

A message appears to confirm the request

to delete. If Yes is touched, the data cannot be

recovered. If more than 1 destination has been set, the system will recalculate the route(s) to the set destination(s) as necessary.

If No is touched, the previous screen will be displayed.

Set destinations can also be deleted by

touching Route. (See DELETING DESTINATIONS on page 77.)

1. DESTINATION SEARCH

67

1

2

3

NAVIG ATIO

N SYSTEM

When Map is touched on the Confirm Destination screen, the map screen will be displayed. The map location of the selected destination can be set as a destination.

1 Scroll the map to the desired point.

Adjust Location : Touch to adjust the position in smaller increments.

When an arrow facing the desired point is

touched, the map scrolls in that direction. When the screen button is released, the

scrolling stops.

2 Touch Go to . The system starts route search and

displays recommended routes.

If a destination has already been set, Go to and Add to Route will be displayed.

Go to : Touch to delete the existing destination(s) and set a new one. Add to Route : Touch to add a destination. Info : If this screen button is displayed on the top of the screen, touch it to view items such as name, address, position and phone number.

3 To start guidance, touch OK .

No. Function

Current position

Destination point

Type of route and its distance

Distance of the entire route

Screen buttonFunction

Turn List Touch to display a list of the turns required to reach the destination.

3 Routes Touch to select the desired route from 3 possible routes. (See page 68.)

Edit Route

Touch to change the route. (See page 69.)

2. STARTING ROUTE GUIDANCE

1. DESTINATION SEARCH

68

Guidance can be paused or resumed. (See PAUSING AND RESUMING GUIDANCE on page 81.)

If OK is touched until a beep sounds, demo mode will start. Press the MAP button to end demo mode.

CAUTION

Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such changed information.

INFORMATION

The route for returning may not be the same as that for going.

The route guidance to the destination may not be the shortest route nor a route without traffic congestion.

Route guidance may not be available if there is no road data for the specified location.

When setting the destination on a map with a scale larger than 0.5 miles (800 m), the map scale changes to 0.5 miles (800 m) automatically. If this occurs, set the destination again.

If a destination that is not located on a road is set, the vehicle will be guided to the point on a road nearest to the destination. The road nearest to the point selected is set as the destination.

3 ROUTES SELECTION

1 Touch 3 Routes to select the desired route from 3 routes.

2 Touch Preferred , Alternate or Short to select the desired route.

Screen buttonFunction

Preferred

Touch to display the recommended route. This route is indicated by an turquoise line.

Alternate

Touch to display the alternative route. This route is indicated by a purple line.

Short

Touch to display the route that is the shortest distance to the set destination. This route is indicated by a green line.

Info Touch to display the information shown below about each of the 3 routes.

1. DESTINATION SEARCH

69

1

2

3

NAVIG ATIO

N SYSTEM

No. Function

Time necessary for the entire trip

Distance of the entire trip

Toll road

Freeway

Ferry

EDIT ROUTE Conditions for the route to the destination can be set again.

1 Touch Edit Route .

2 This screen is displayed.

Screen button Function Page

Add Touch to add destinations. 76

Delete Touch to delete destinations. 77

Reorder Touch to reorder destinations. 76

Preferences

Touch to display the choices available when setting the conditions the system uses to determine the route to the destination.

80

INFORMATION

Even if the Freeways indicator is dimmed, the route cannot avoid including a freeway in some cases.

If the calculated route includes a trip by ferry, the route guidance shows a sea route. After you travel by ferry, the current position may be incorrect. Upon reception of GPS signals, it is automatically corrected.

2. ROUTE GUIDANCE

70

During route guidance, various types of guidance screens can be displayed depending on conditions.

SCREEN LAYOUT

No. Function

Distance to the next turn and an arrow indicating the turning direction

Guidance route

Current position

Distance and travel/arrival time to the destination

Current street name

INFORMATION

If the vehicle goes off the guidance route, the route is searched again.

For some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select a road that should not be traveled on.

When arriving at the set destination the destination name will be displayed on the top of the screen. Touching Off clears the display.

DURING FREEWAY DRIVING During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the next junction/exit, or POIs in the vicinity of the freeway exit.

No./ Icon Function

Distance from the current position to the exit or junction

Exit number and junction name

Current position

Points of Interest that are close to a freeway exit

Current street name

Touch to display the selected map of the exit vicinity.

Touch to scroll to farther junctions or exits.

Touch to scroll to closer junctions or exits.

Touch to display the closest 3 junctions or exits.

1. ROUTE GUIDANCE SCREEN

2. ROUTE GUIDANCE

71

1

2

3

NAVIG ATIO

N SYSTEM

WHEN APPROACHING A FREEWAY EXIT OR JUNCTION

When the vehicle approaches an exit or junction, the freeway guidance screen will be displayed.

No. Function

Next street name

Current position

Distance from the current position to the exit or junction

: Touch to hide the freeway guidance

screen. Touch Intersection , or press the

MAP button, to change back to the freeway guidance screen.

WHEN APPROACHING AN INTERSECTION

When the vehicle approaches an intersection, the intersection guidance screen will be displayed.

No. Function

Next street name

Current position

Distance to the intersection

: Touch to hide the intersection

guidance screen. Touch Intersection , or press the

MAP button, to change back to the intersection guidance screen.

2. ROUTE GUIDANCE

72

OTHER SCREENS

TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed.

1 Touch Turn List during guidance to display the turn list.

No. Function

Turn direction

Distance between turns

Next street or destination name

Current street name

ARROW SCREEN On this screen, information about the next turn on the guidance route can be viewed.

1 Touch Turn-by-Turn Arrow during guidance to display the arrow screen.

No. Function

Exit number or street name

Turn direction

Distance to the next turn

Current street name

2. ROUTE GUIDANCE

73

1

2

3

NAVIG ATIO

N SYSTEM

As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the systems voice guidance will provide various messages.

No. Voice guidance

Proceed about 5 miles to Main street.

In half of a mile, right turn onto Main street.

Next right./Right turn ahead.

(Beep sound only)

INFORMATION

The street names may not be pronounced correctly or clearly due to the text-to-speech function.

On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow time to maneuver the vehicle.

No. Voice guidance

Proceed about 4 miles to the traffic circle.

In half of a mile, traffic circle ahead and then the 3rd exit onto Main street.

The 3rd exit ahead.

The exit ahead.

(Beep sound only)

*: The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non-residential areas.

No. Voice guidance

In half of a mile, make a legal U-turn.

Make a legal U-turn ahead.

(Beep sound only)

2. TYPICAL VOICE GUIDANCE PROMPTS

2. ROUTE GUIDANCE

74

The system announces the approach to

the final destination.

No. Voice guidance

In half of a mile, your destination is ahead.

Your destination is ahead.

You have arrived at your destination. The route guidance is now finished.

If a voice guidance command cannot be

heard, press the MAP button to hear it again.

To adjust the voice guidance volume, see VOICE VOLUME on page 48.

INFORMATION

If the system cannot determine the current position correctly (in cases of poor GPS signal reception), the voice guidance may be early or late.

ROUTES INCLUDING IPD ROADS Even when on IPD roads (roads that are not completely digitized in our database), you will be guided along the searched route via voice guidance.

After it has made a route calculation, the

system will advise the user whether IPD roads are included in the route or not.

The portion of the route that covers IPD roads is indicated by light blue.

No. Voice guidance

On the way to your destination, there will be roads with incomplete data.

In half of a mile, left turn.

Next left. Upcoming roads have incomplete data. Please carefully observe the local traffic restrictions, as they may not match the navigation guidance.

IPD roads are roads that are not yet

completely digitized in our database. However, their geometry, name and administrative coding are already known.

CAUTION

Be sure to obey the traffic regulations and keep the road condition in mind especially when you are driving on IPD roads. The route guidance may not have the updated information such as the direction of a one way street.

2. ROUTE GUIDANCE

75

1

2

3

NAVIG ATIO

N SYSTEM

When the vehicle is on the guidance route, the distance and the estimated travel/arrival time to the destination are displayed. When the vehicle is not on the guidance route, the distance and direction of the destination are displayed. When driving on the guidance route with more than one destination set, the distance and estimated travel/arrival time from the current position to each destination are displayed.

1 Touch the screen button indicated by the arrow.

2 Touch the number screen button to display the desired destination.

The distance, estimated travel time and

estimated arrival time from the current position to the selected destination are displayed.

Icon Function

Estimated travel time is displayed.

Estimated arrival time is displayed.

Touch to switch to estimated arrival time.

Touch to switch to estimated travel time.

Displayed while driving off the guidance route. The destination direction is indicated by an arrow.

INFORMATION

When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time are calculated based on the set vehicle speed information. (See DRIVING SPEEDS on page 103.) However, when the vehicle is not on the guidance route, the distance is the linear distance between the current position and the destination.

3. DISTANCE AND TIME TO DESTINATION

2. ROUTE GUIDANCE

76

ADDING DESTINATIONS Destinations can be added and routes can be searched again.

1 Touch Route .

2 Touch Add .

3 Input an additional destination in the same way as a destination search. (See DESTINATION SEARCH on page 51.)

4 Touch the desired Add Destination Here to insert the new destination into the route.

REORDERING DESTINATIONS

When more than one destination is set, the arrival order of the destinations can be changed.

1 Touch Route .

2 Touch Reorder .

3 Touch the desired destination and touch Move Up or Move Down to change the arrival order.

4 Touch OK .

5 After selecting the destinations, touch OK .

4. SETTING AND DELETING DESTINATIONS

2. ROUTE GUIDANCE

77

1

2

3

NAVIG ATIO

N SYSTEM

The system searches for the guidance route again, and displays the entire route.

DELETING DESTINATIONS A set destination can be deleted.

1 Touch Route .

2 Touch Delete .

When more than one destination is set, a

list will be displayed on the screen.

3 Touch the destination to be deleted.

Delete All : Touch to delete all destinations on the list. A message appears to confirm the request

to delete.

4 Touch Yes to delete the destination(s).

If Yes is touched, the data cannot be recovered. If more than 1 destination has been set, the system will recalculate the route(s) to the set destination(s) as necessary.

If No is touched, the previous screen will be displayed.

2. ROUTE GUIDANCE

78

DETOUR SETTING While the route guidance is operating, the route can be changed to detour around a section of the route where a delay is caused by road repairs, or an accident, etc.

1 Touch Route .

2 Touch Detour .

3 Touch a screen button to select the desired detour distance.

1 mile (km), 3 miles (km) or 5 miles (km) : Touch one of these screen buttons to start the detour process. After detouring, the system returns to the

original guidance route. Whole Route : Touch to make the system calculate an entire new route to the destination. Around Traffic : Touch to make the system search for the route based on the traffic congestion information received from NavTraffic. For details, see NavTraffic on page 241.

INFORMATION

This picture shows an example of how the

system would guide around a delay caused by a traffic jam.

This position indicates the location of a traffic jam caused by road repairs, an accident, etc.

This route indicates the detour suggested by the system.

When the vehicle is on a freeway, the detour distance selections are 5, 15 and 25 miles (or 5, 15 and 25 km if units are in km).

The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions.

5. SETTING ROUTE

2. ROUTE GUIDANCE

79

1

2

3

NAVIG ATIO

N SYSTEM

ROUTE OVERVIEW

1 Touch Route .

2 Touch Overview .

3 The entire route from the current position to the destination is displayed.

Screen button Function

OK Touch to start guidance.

Turn List Touch to display a list of the turns required to reach the destination.

TURN LIST

1 Touch or to skip to the next page of the list of roads. Touch and hold or to scroll through the list of roads.

: This mark indicates the direction in

which you should turn at the intersection. Map : The selected point is displayed on the map screen.

INFORMATION However, not all road names in the route

may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through 2 or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting point, along with the distance to the next turn.

2. ROUTE GUIDANCE

80

ROUTE PREFERENCE TO SELECT ROUTE TYPE The Preferred, Short or Alternative route can be selected.

1 Touch Route .

2 Touch Preferences .

3 Touch Preferred , Short or Alternate and touch OK .

4 The entire route from the starting point to the destination is displayed.

OK : Touch to start guidance. Edit Route : Touch to change a route. (See page 69.)

TO SELECT ROUTE FEATURES

A number of choices are available when setting the conditions the system uses to determine the route to the destination.

1 Touch Route .

2 Touch Preferences to display conditions that can be selected when the system determines the route to the destination.

2. ROUTE GUIDANCE

81

1

2

3

NAVIG ATIO

N SYSTEM

3 Select the desired route preference by touching the screen button.

The system will avoid using routes that

include items whose indicators are off.

4 After selecting the desired route preference, touch OK .

STARTING ROUTE FROM ADJACENT ROAD

The route guidance can be started from an adjacent road. (e.g. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.)

1 Touch Route .

2 Touch Preferences .

3 Touch Start from Adjacent Road .

INFORMATION When there is no adjacent road, this

screen button will not be displayed.

PAUSING AND RESUMING GUIDANCE

TO PAUSE GUIDANCE 1 Touch Route .

2. ROUTE GUIDANCE

82

2 Touch Pause Guidance .

The screen will return to the current

position map without route guidance.

INFORMATION Without route guidance, Pause

Guidance cannot be used. TO RESUME GUIDANCE

1 Touch Route .

2 Touch Resume Guidance .

The map screen, with the current position

displayed, will be returned to.

SHOW ON MAP DISPLAY POI ICONS POI icons such as gas stations and restaurants can be displayed on the map screen. Their location can also be set as a destination and used for route guidance.

1 Touch Show on Map .

2 Touch Select POI to display a particular type of POI icon on the screen.

When the POI icons to be displayed on the

map screen have already been set, Change POI is displayed.

2. ROUTE GUIDANCE

83

1

2

3

NAVIG ATIO

N SYSTEM

A screen with a limited choice of Points of

Interest will be displayed. (To change the displayed POI list, see page 105.)

SELECTING POI ICONS TO BE DISPLAYED

Up to 5 categories of icons can be displayed on the map screen.

1 Touch the desired Point of Interest category to display POI location icons on the map screen.

By touching the desired POI category and then touching OK , the selected POI icons are displayed on the map screen.

To turn off the Points of Interest icons on the map screen, touch Clear .

Other POIs : Touch to display other Points of Interest categories if the desired Points of Interest cannot be found on the limited choice screen. Find Local POI : Touch to search for the nearest POIs. Then select one of the categories. The system will list the points within 200 miles (320 km). (See page 84.)

2 Touch Other POIs on the Select POI Icons screen.

When a POI category is selected from either the limited list or the complete list, the icons of those locations will be displayed on the map screen.

3 Touch the desired POI categories.

The selected categorys icon will appear

on the top left of the screen. By touching the desired POI category and

then touching OK , the selected POI icons are displayed on the map screen.

If the desired POI category is not on the screen, touch List All Categories to list all POI categories.

Touch the desired POI categories from the

list. The selected category icon appears on

the top left of the screen. By touching the desired POI category

and then touching OK , the selected POI icons are displayed on the map screen.

To return to the POI category selection screen, touch More .

2. ROUTE GUIDANCE

84

TO DISPLAY THE LOCAL POI LIST

Points of Interest that are within 200 miles (320 km) of the current position will be listed from among the selected categories.

1 Touch Find Local POI .

2 Touch the screen button of the desired Point of Interest.

The selected Points of Interest are

displayed on the map screen. Near... : Touch to search for Points of Interest near the current position or along the route.

Screen button Function

Near Here

Touch to display the list of Points of Interest near the current position.

Along My Route

Touch to display the list of Points of Interest along the route.

TO SET A POI AS A DESTINATION

One of the Point of Interest icons can be selected on the map screen as a destination and can be used for route guidance.

1 Directly touch the desired Point of Interest icon to set it as a destination.

The map will shift so that the icon is

centered on the screen and overlaps with the cursor . At this time, the distance from the current position is displayed on the screen. The distance shown is measured as a straight line from the current position to the POI.

2 When the desired Point of Interest overlaps with the cursor, touch Enter

. The screen changes and displays the map

location of the selected destination and route preference. (See STARTING ROUTE GUIDANCE on page 67.)

2. ROUTE GUIDANCE

85

1

2

3

NAVIG ATIO

N SYSTEM

TO HIDE POI ICONS

1 Touch Show on Map .

2 Touch POI Icons .

The POI Icons indicator is dimmed. The map screen will be displayed with the

POI icons hidden. To display the POI icons again, touch POI

Icons on the Show on Map screen.

ROUTE TRACE Up to 124 miles (200 km) of the traveled route can be stored and retraced on the display.

INFORMATION

This feature is available when the map scale is more than 30 miles (50 km).

TO START RECORDING THE ROUTE TRACE

1 Touch Show on Map .

2 Touch Route Trace .

TheRoute Trace indicator is highlighted.

TO STOP RECORDING THE ROUTE TRACE

1 Touch Show on Map .

2. ROUTE GUIDANCE

86

2 Touch Route Trace .

Touching Yes stops recording and the

route trace remains displayed on the screen.

Touching No stops recording and the route trace is erased.

3. ADDRESS BOOK

87

1

2

3

NAVIG ATIO

N SYSTEM

Points or areas on the map can be registered. The registered points can be used on the Destination screen. (See DESTINATION SEARCH BY HOME, on page 52 and DESTINATION SEARCH BY Address Book on page 61.) Registered areas to avoid, will be avoided when the system searches for a route.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation .

4 Touch the desired items to be set.

On this screen, the following operations

can be performed:

No. Function Page

Touch to set home. 87

Touch to set preset destinations. 89

Touch to set the address book. 92

Touch to set areas to avoid. 96

Touch to delete previous destinations. 100

Touch to set detailed navigation settings. 102

SETTING UP THE Home If home has been registered, that information can be recalled by touching Go Home on the Destination screen. (See DESTINATION SEARCH BY HOME on page 52.)

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

3. ADDRESS BOOK

1. NAVIGATION SETTINGS

3. ADDRESS BOOK

88

4 Touch Home .

5 Touch the desired screen button.

No. Function Page

Registering home 88

Editing home 89

Deleting home 89

REGISTERING HOME

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Home on the Navigation Settings screen.

5 Touch Set Home .

6 Touch the desired screen button and enter the location in the same way as for a destination search. (See DESTINATION SEARCH on page 51.)

When registration of home is completed,

the Edit Home screen will be displayed.

7 Touch OK . To edit registered information, see

EDITING HOME on page 89.

3. ADDRESS BOOK

89

1

2

3

NAVIG ATIO

N SYSTEM

EDITING HOME

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Home on the Navigation Settings screen.

5 Touch Edit .

6 Touch Edit next to the item to be edited.

No. Function Page

To edit the home name. The name can be displayed on the map.

95

To edit location information. 95

To edit the phone number. 96

To change the icon to be displayed on the map. 94

Show Name on Map: The name of a home can be set to be displayed on the map by touching On or Off . (See page 95.)

7 Touch OK . DELETING HOME

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Home on the Navigation Settings screen.

5 Touch Delete .

6 Touch Yes to delete home and touch No to cancel the deletion.

SETTING UP THE Preset Destinations

If preset destination has been registered, that information can be recalled by using Preset Destinations on the Navigation Settings screen. (See DESTINATION SEARCH BY PRESET DESTINATIONS on page 52.)

1 Press the MENU button.

2 Touch Setup .

3. ADDRESS BOOK

90

3 Touch Navigation on the Setup screen.

4 Touch Preset Destinations .

5 Touch the desired screen button.

No. Function Page

Registering a preset destination 90

Editing a preset destination 91

Deleting a preset destination 91

REGISTERING PRESET DESTINATIONS

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Preset Destinations on the Navigation Settings screen.

5 Touch Set .

6 Touch the desired screen button and enter the location in the same way as for a destination search. (See DESTINATION SEARCH on page 51.)

7 Touch a position for this preset destination.

When registration of a preset destination is

completed, the Edit Preset Destination screen will be displayed.

8 Touch OK . To edit registered information, see

EDITING PRESET DESTINATIONS on page 91.

3. ADDRESS BOOK

91

1

2

3

NAVIG ATIO

N SYSTEM

EDITING PRESET DESTINATIONS

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Preset Destinations on the Navigation Settings screen.

5 Touch Edit .

6 Touch the screen button of the desired preset destination.

7 Touch Edit next to the item to be edited.

No. Function Page

To edit the preset destination name. The name can be displayed on the map.

95

To edit location information. 95

To edit the phone number. 96

To change the icon to be displayed on the map. 94

Show Name on Map: The name of a preset destination can be set to be displayed on the map by touching On or Off . (See page 95.)

8 Touch OK .

DELETING PRESET DESTINATIONS

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Preset Destinations on the Navigation Settings screen.

5 Touch Delete .

3. ADDRESS BOOK

92

6 Touch the preset destination to be deleted.

Screen button Function

Select All Touch to select all preset destinations.

Unselect All

Touch to cancel the Select All function.

7 Touch Delete .

8 Touch Yes to delete the preset destination and touch No to cancel the deletion.

SETTING UP THE Address Book

Points or areas on the map can be registered.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Address Book .

5 Touch the desired screen button.

No. Function Page

Registering address book entries 92

Editing address book entries 93

Deleting address book entries 96

REGISTERING ADDRESS BOOK ENTRIES

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Address Book on the Navigation Settings screen.

3. ADDRESS BOOK

93

1

2

3

NAVIG ATIO

N SYSTEM

5 Touch New .

6 Touch the desired screen button and enter the location in the same way as for a destination search. (See DESTINATION SEARCH on page 51.)

After the address book entry has been

registered, the Edit Address Book Entry screen will be displayed.

7 Touch OK . To edit registered information, see

EDITING ADDRESS BOOK ENTRIES on page 93.

INFORMATION

Up to 100 address book entries can be registered.

EDITING ADDRESS BOOK ENTRIES

The icon, name, location and/or phone number of a registered address book entry can be edited.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Address Book on the Navigation Settings screen.

5 Touch Edit .

6 Touch the screen button of the desired address book entry.

3. ADDRESS BOOK

94

7 Touch Edit next to the item to be edited.

No. Function Page

To edit the address book entry name. The name can be displayed on the map.

95

To edit location information. 95

To edit the phone number. 96

To change the icon to be displayed on the map. 94

Show Name on Map: The name of an address book entry can be set to be displayed on the map by touching On or Off .(See page 95.)

8 Touch OK .

TO CHANGE Icon

1 Touch Edit .

2 Touch the desired icon.

Change pages by touching the Page 1 ,

Page 2 or With Sound tab.

SOUND ICONS A sound for some address book entries can be set. When the vehicle approaches the location of the address book entry, the selected sound will be heard.

1 Touch the With Sound tab on the Address Book Entry Icon screen.

2 Touch the desired sound icon.

The next screen appears when Bell (with

Direction) is touched.

3. ADDRESS BOOK

95

1

2

3

NAVIG ATIO

N SYSTEM

3 Touch either or to adjust the direction. Touch OK .

INFORMATION The bell sounds only when the vehicle

approaches this point in the direction that has been set.

TO CHANGE Name

1 Touch Edit .

2 Enter the name using the alphanumeric keys.

Up to 32 characters can be entered.

3 Touch OK . The previous screen will be displayed.

DISPLAYING ADDRESS BOOK ENTRY NAMES

1 Touch On to display the name on the map and touch Off to not display it.

TO CHANGE Location

1 Touch Edit .

2 Touch one of the 8 directional screen buttons to move the cursor to the desired point on the map.

3 Touch OK . The previous screen will be displayed.

3. ADDRESS BOOK

96

TO CHANGE Phone # (PHONE NUMBER)

1 Touch Edit .

2 Enter the number using the number keys.

3 Touch OK . The previous screen will be displayed.

DELETING ADDRESS BOOK ENTRIES

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Address Book on the Navigation Settings screen.

5 Touch Delete .

6 Touch the address to be deleted.

Screen button Function

Select All Touch to select all registered addresses.

Unselect All

Touch to cancel the Select All function.

7 Touch Delete .

8 Touch Yes to delete the address book and touch No to cancel the deletion.

SETTING UP THE Areas to Avoid

Areas to be avoided because of traffic jams, construction work or other reasons can be registered as areas to avoid.

1 Press the MENU button.

2 Touch Setup .

3. ADDRESS BOOK

97

1

2

3

NAVIG ATIO

N SYSTEM

3 Touch Navigation on the Setup screen.

4 Touch Areas to Avoid .

5 Touch the desired screen button.

No. Function Page

Registering areas to avoid 97

Editing areas to avoid 98

Deleting areas to avoid 100

REGISTERING AREAS TO AVOID

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Areas to Avoid on the Navigation Settings screen.

5 Touch New .

6 Touch the desired screen button and enter the location in the same way as for a destination search, or display the map of the area to be avoided. (See DESTINATION SEARCH on page 51.)

7 Scroll the map to the desired point.

Adjust Location : Touch to adjust the position in smaller increments.

8 Touch Enter .

3. ADDRESS BOOK

98

9 Touch either or to change the size of the area to be avoided.

10 Touch OK . When registration of an area to avoid is

completed, the Area to Avoid screen will be displayed.

INFORMATION

If a destination is input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown.

Up to 10 locations can be registered as points/areas to avoid.

EDITING AREA TO AVOID The name, location and/or area size of a registered area can be edited.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Areas to Avoid on the Navigation Settings screen.

5 Touch Edit .

6 Touch the desired area to avoid.

7 Touch Edit next to the item to be edited.

No. Function Page

To edit the name of the area to avoid. The name can be displayed on the map.

99

To edit the area location. 99

To edit the area size. 100

3. ADDRESS BOOK

99

1

2

3

NAVIG ATIO

N SYSTEM

Show Name on Map: The name of an area to be avoided that may be displayed on the map by touching On or Off. (See page 99.) Active: To turn on or off the area to avoid feature. To turn on the feature, touch On on the Area to Avoid screen. To turn off the feature, touch Off on the Area to Avoid screen.

8 Touch OK .

TO CHANGE Name

1 Touch Edit .

2 Enter the name using the alphanumeric keys.

Up to 32 characters can be entered.

3 Touch OK . The previous screen will be displayed.

DISPLAYING NAMES OF AREAS TO BE AVOIDED

1 Touch On , next to Show Name on Map, to display the area to be avoided name on the map. Touch Off to not display it.

TO CHANGE Location

1 Touch Edit .

2 Touch one of the 8 directional screen buttons to move the cursor to the desired point on the map.

3 Touch OK . The previous screen will be displayed.

3. ADDRESS BOOK

100

TO CHANGE Size

1 Touch Edit .

2 Touch either or to change the size of the area to be avoided.

3 Touch OK . The previous screen will be displayed. DELETING AREAS TO AVOID

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Areas to Avoid on the Navigation Settings screen.

5 Touch Delete .

6 Touch the area to be deleted.

Screen button Function

Select All Touch to select all registered areas to avoid.

Unselect All

Touch to cancel the Select All function.

7 Touch Delete .

8 Touch Yes to delete the area(s) and touch No to cancel the deletion.

DELETING PREVIOUS DESTINATIONS

Previous destinations can be deleted.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

3. ADDRESS BOOK

101

1

2

3

NAVIG ATIO

N SYSTEM

4 Touch Delete Previous Dest. .

5 Touch the previous destination to be deleted.

Screen button Function

Select All Touch to select all previous destinations.

Unselect All

Touch to cancel the Select All function.

6 Touch Delete .

7 Touch Yes to delete the destination(s) and touch No to cancel the deletion.

4. SETUP

102

Settings are available for driving speeds, favorite POI categories, automatic screen change, Off function, etc.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation .

4 Touch Detailed Navi. Settings .

5 Touch the items to be set.

6 Touch Save .

SCREENS FOR NAVIGATION SETTINGS

On this screen, the following functions can

be performed:

No. Function

Touch to set the average cruising speed. (See DRIVING SPEEDS on page 103.)

Touch to set the automatic input function to On or Off .

1. DETAILED NAVIGATION SETTINGS

4. SETUP

103

1

2

3

NAVIG ATIO

N SYSTEM

No. Function

Touch to set the voice guidance for the next street name to On or Off during route guidance.

Touch to set the automatic reroute of the guidance route to avoid heavy congestion to On or Off . (AUTO AVOID TRAFFIC on page 104.)

Touch to set the indication of freely flowing traffic by the arrow to On or Off . (See SHOW FREE FLOWING TRAFFIC on page 104.)

Touch to set displayed POI icon categories. (See POI CATEGORY CHANGE (SELECT POI ICONS) on page 105.)

Touch to set screen buttons to be displayed on the map screen when Off is selected. (See SCREEN LAYOUT FUNCTION ( Off Function) on page 105.)

Touch to adjust the current position mark manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See CURRENT POSITION/TIRE CHANGE CALIBRATION on page 106.)

Touch to set the display of pop-up information to On or Off . (See POP-UP INFORMATION on page 107.)

Touch to set IPD road guidance to On or Off . (For information on IPD roads, see page 74.)

To reset all setup items, touch Default .

DRIVING SPEEDS The speed that is used for the calculation of the estimated travel time and estimated arrival time can be set.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Driving Speeds .

6 Touch < or > to set the average vehicle speeds for Residential, Main Streets and Freeways.

To set the default speeds,

touch Default . To use settings based on traffic

information, touch Consider Traffic Info. .

7 After setting of the desired speeds is completed, touch Save" .

4. SETUP

104

INFORMATION

The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the guidance route.

The time shown on the screen may vary greatly depending on progress along the route, which may be affected by conditions such as traffic jams and construction work.

Up to 99 hours 59 minutes can be displayed.

AUTO AVOID TRAFFIC The guidance route automatically changes to another route to avoid heavy congestion when Avoid Traffic is turned on.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Avoid Traffic .

6 Touch On or Off .

7 Touch Save . When congestion information about the

guidance route has been received, a screen will appear to ask if it is desirable to reroute to avoid the congestion.

Touch Yes to reroute. Another route to avoid the congestion will appear.

Touch No if it is not desirable to reroute.

INFORMATION When the Traffic Information indicator is

dimmed, Avoid Traffic, Traffic Incident Warning and Show Free Flowing Traffic will not operate.

SHOW FREE FLOWING TRAFFIC

Free flowing traffic can be shown by an arrow when Show Free Flowing Traffic is turned on.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Show Free Flowing Traffic .

6 Touch On or Off .

7 Touch Save .

INFORMATION When the Traffic Information indicator is

dimmed, Avoid Traffic, Traffic Incident Warning and Show Free Flowing Traffic will not operate.

4. SETUP

105

1

2

3

NAVIG ATIO

N SYSTEM

POI CATEGORY CHANGE (SELECT POI ICONS)

Select up to 6 POI icons to be displayed on the map screen.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Favorite POI Categories .

6 Touch the category to be changed.

7 Touch the desired group.

If the desired POI category is not on the screen, touch List All Categories to list all POI categories.

8 Touch the desired category.

The screen returns to the first page of the

Favorite POI Categories screen.

9 Touch OK .

SCREEN LAYOUT FUNCTION ( Off Function)

Each screen button and current street name on the map screen can be displayed or hidden.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Off Function .

4. SETUP

106

6 Touch the screen buttons to be turned off. The selected screen buttons will be dimmed.

To set the setting as a default, touch

Default .

7 Touch OK . The previous screen will be displayed.

8 Touch Save .

CURRENT POSITION/TIRE CHANGE CALIBRATION

The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

5 Touch Calibration .

6 Touch the desired screen button.

For additional information on the accuracy of a current position, see LIMITATIONS OF THE NAVIGATION SYSTEM on page 113.

POSITION/DIRECTION CALIBRATION

When driving, the current position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, the current position mark can be adjusted manually.

1 Touch Position / Direction .

4. SETUP

107

1

2

3

NAVIG ATIO

N SYSTEM

2 Touch one of the 8 directional screen buttons to move the cursor to the desired point on the map.

3 Touch OK .

4 Touch either the or to adjust the direction of the current position mark.

5 Touch OK . The map will be displayed.

TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function will adjust miscalculation caused by the circumference difference between the old and new tires.

1 To perform the distance calibration procedure, touch Tire Change .

The message appears and the quick

distance calibration is automatically started. A few seconds later, a map will be displayed.

INFORMATION

If this procedure is not performed when the tires are replaced, the current position mark may be incorrectly displayed.

POP-UP INFORMATION When Pop-up information is turned on, pop-up information will be displayed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Navigation on the Setup screen.

4 Touch Detailed Navi. Settings on the Navigation Settings screen.

4. SETUP

108

5 Touch Pop-up Information .

6 Touch On or Off .

7 Touch Save . When Pop-up Information is turned off,

the following messages will not be displayed.

This message appears when the map is displayed POI icons and the map scale is over 0.5 miles (800 m).

This message appears when the map is switched to dual map screen mode.

4. SETUP

109

1

2

3

NAVIG ATIO

N SYSTEM

MAINTENANCE When the navigation system is turned on, the Maintenance Reminder screen displays when it is time to replace a part or certain components. (See page 26.)

1 Press the MENU button.

2 Touch Setup .

3 Touch Vehicle .

4 Touch Maintenance .

5 Touch the desired screen button.

Setting maintenance information. (See

page 109.) Setting dealer. (See page 111.)

MAINTENANCE INFORMATION SETTING

1 Press the MENU button.

2 Touch Setup .

3 Touch Vehicle on the Setup screen.

4 Touch Maintenance on the Vehicle Settings screen.

5 Touch the desired screen button.

2. VEHICLE SETTINGS

4. SETUP

110

When the vehicle needs to be serviced, the screen button color will change to orange. Screen button Function

Engine oil Replace engine oil

Oil filter Replace engine oil filter

Rotation Rotate tires

Tires Replace tires

Battery Replace 12-volt battery

Brake pad Replace brake linings

Wipers Replace wiper blades

Coolant Replace engine coolant

Brake oil Replace brake fluid

Trans. fluid Replace transmission fluid

Service Scheduled maintenance

Air filter Replace air filter

Personal New information items can be created separately from provided ones.

Delete All Touch to cancel all conditions which have been inputted.

Reset All Touch to reset the item which has satisfied a condition.

Set Dealer Touch to register dealer information. (See DEALER SETTING on page 111.)

Dealer Info. Touch to edit dealer information. (See DEALER SETTING on page 111.)

Reminder

When this screen button is touched, the indicator is illuminated. The system is set to give maintenance information with the Maintenance Reminder screen. (See page 26.)

6 Input the conditions.

Screen button Function

Date Touch to input the next maintenance date.

Distance Touch to input the driving distance until the next maintenance check.

Delete Touch to cancel the date and distance conditions.

Reset Touch to reset the date and distance conditions.

7 Touch OK . The screen then returns to the

Maintenance screen.

INFORMATION For scheduled maintenance information,

refer to Scheduled Maintenance Guide or Owners Manual Supplement .

Depending on driving or road conditions, the actual date and distance maintenance should be performed may differ from the stored date and distance in the system.

4. SETUP

111

1

2

3

NAVIG ATIO

N SYSTEM

DEALER SETTING Dealer information can be registered in the system. With dealer information registered, route guidance to the dealer is available.

1 Press the MENU button.

2 Touch Setup .

3 Touch Vehicle on the Setup screen.

4 Touch Maintenance on the Vehicle Settings screen.

5 Touch Set Dealer .

6 If a dealer has not been registered, enter the location of a dealer in the same way as for a destination search. (See DESTINATION SEARCH on page 51.)

When Set Dealer registration is finished,

the Dealer screen is displayed.

7 Touch Edit next to the item to be edited.

Screen button Function

Dealer Touch to enter the name of a dealer. (See page 112.)

Contact Touch to enter the name of a dealer member. (See page 112.)

Location Touch to set the location. (See page 112.)

Phone # Touch to enter the phone number. (See page 112.)

Delete Dealer

Touch to delete the dealer information displayed on the screen.

Enter

Touch to set the displayed dealer as a destination. (See STARTING ROUTE GUIDANCE on page 67.)

4. SETUP

112

TO EDIT Dealer OR Contact

1 Touch Edit next to Dealer or Contact.

2 Enter the name using the alphanumeric keys.

Up to 32 characters can be entered.

3 Touch OK . The previous screen will be displayed.

TO EDIT Location

1 Touch Edit next to Location.

2 Touch one of the 8 directional screen buttons to move the cursor to the desired point on the map screen.

3 Touch OK . The previous screen will be displayed.

TO EDIT Phone # (PHONE NUMBER)

1 Touch Edit next to Phone #.

2 Enter the number using number keys.

3 Touch OK . The previous screen will be displayed.

5. GPS (GLOBAL POSITIONING SYSTEM)

113

1

2

3

NAVIG ATIO

N SYSTEM

This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc. However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances.

The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current position, normally using 4 or more satellites, and in some case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most of the time, occasional positioning errors of up to 300 feet (100 m) can and should be expected. Generally, position errors will be corrected within a few seconds.

When the vehicle is receiving signals from satellites, the GPS mark appears at the top left of the screen. The GPS signal may be physically obstructed, leading to inaccurate vehicle position on the map screen. Tunnels, tall buildings, trucks, or even the placement of objects on the instrument panel may obstruct the GPS signals. The GPS satellites may not send signals due to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases.

NOTICE

The installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems.

Accurate current position may not be shown in the following cases: When driving on a small angled

Y-shaped road. When driving on a winding road. When driving on a slippery road such

as in sand, gravel, snow, etc. When driving on a long straight road. When motorway and surface streets

run in parallel. After moving by ferry or vehicle carrier. When a long route is searched during

high speed driving. When driving without setting the current

position calibration correctly. After repeating a change of direction by

going forward and backward, or turning on a turntable in a parking lot.

When leaving a covered parking lot or parking garage.

When a roof carrier is installed. When driving with tire chains installed. When the tires are worn. After replacing a tire or tires. When using tires that are smaller or

larger than the factory specifications. When the tire pressure in any of the 4

tires is not correct.

If the vehicle cannot receive GPS signals, the current position can be adjusted manually. For information on setting the current position calibration, see page 106.

5. GPS (GLOBAL POSITIONING SYSTEM)

1. LIMITATIONS OF THE NAVIGATION SYSTEM

5. GPS (GLOBAL POSITIONING SYSTEM)

114

Inappropriate route guidance may occur in the following cases: When turning at an intersection off the

designated route guidance. If you set more than one destination but

skip any of them, auto reroute will display a route returning to the destination on the previous route.

When turning at an intersection for which there is no route guidance.

When passing through an intersection for which there is no route guidance.

During auto reroute, the route guidance may not be available for the next turn to the right or left.

During high speed driving, it may take a long time for auto reroute to operate. In auto reroute, a detour route may be shown.

After auto reroute, the route may not be changed.

If an unnecessary U-turn is shown or announced.

If a location has multiple names and the system announces one or more of them.

When a route cannot be searched. If the route to your destination includes

gravel, unpaved roads or alleys, the route guidance may not be shown.

Your destination point might be shown on the opposite side of the street.

When a portion of the route has regulations prohibiting the entry of the vehicle that vary by time or season or other reasons.

The road and map data stored in the navigation system may not be complete or may not be the latest version.

After replacing a tire, implement the operation described in the TIRE CHANGE CALIBRATION. (See page 107.)

INFORMATION This navigation system uses tire turning

data and is designed to work with factory-specified tires for the vehicle. Installing tires that are larger or smaller than the originally equipped diameter may cause inaccurate display of the current position. The tire pressure also affects the diameter of the tires, so make sure that the tire pressure of all 4 tires is correct.

115

1

2

3

4

PH O

N E

4

PHONE

1 PHONE OPERATION

1. QUICK REFERENCE .................116

2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE) .......118 USING THE PHONE

SWITCH ...............................119 USING THE STEERING

SWITCHES ..........................119 ABOUT THE PHONEBOOK

IN THIS SYSTEM.................119 WHEN SELLING OR DISPOSING

OF THE VEHICLE................120

3. REGISTER A Bluetooth PHONE.....................................122 CONNECTING

A Bluetooth PHONE...........123 RECONNECTING

THE Bluetooth PHONE......125

4. CALL ON THE Bluetooth PHONE.....................................126 BY DIAL ....................................126 BY PHONEBOOK.....................126 BY SPEED DIAL.......................128 BY CALL HISTORY ..................128 BY VOICE RECOGNITION.......129 CALLING USING

AN SMS/MMS MESSAGE ...131 BY POI* CALL...........................131

5. RECEIVE ON THE Bluetooth PHONE.....................................132

* : Point of Interest

6. TALK ON THE Bluetooth PHONE..................................... 133 WHEN YOU SELECT 0-9 ...... 133 INCOMING CALL WAITING ..... 134

7. Bluetooth PHONE MESSAGE FUNCTION............................... 135 CHECKING MESSAGES ......... 135 REPLYING (QUICK REPLY) .... 135 NEW MESSAGE

NOTIFICATION.................... 137 2 SETUP

1. PHONE SETTINGS.................... 138 PHONE SOUND SETTINGS.... 138 PHONEBOOK .......................... 139 MESSAGE SETTINGS............. 150 PHONE DISPLAY SETTINGS ..153

2. Bluetooth SETTINGS.............. 155 REGISTERED DEVICES ......... 155 SELECTING

A Bluetooth PHONE .......... 159 SELECTING PORTABLE

PLAYER............................... 160 DETAILED Bluetooth

SETTINGS........................... 161

116

Bluetooth phones can be operated via the navigation systems screen. To display the hands-free operation screen, press the MENU button and touch Phone or the switch on the steering wheel.

No. Name Function

The condition of Bluetooth connection

No connection Good

An antenna for the Bluetooth connection is built into the display. The condition of the Bluetooth connection may deteriorate and the system may not function when a Bluetooth

phone is used in the following conditions and/or places: The cellular phone is obstructed by certain objects (such

as when it is behind the seat or in the glove box and console box).

The cellular phone touches or is covered with metal materials.

Leave the Bluetooth phone in a place where the condition of the Bluetooth connection is good. When the cellular phone is not connected, No Connect is displayed.

1. PHONE OPERATION

1. QUICK REFERENCE

1. PHONE OPERATION

117

1

2

3

4

PH O

N E

No. Name Function

The amount of battery charge left

Empty Full

This is not displayed when the Bluetooth is not connected. The amount displayed does not always correspond with the amount displayed on the cellular phone. The amount of battery charge left may not be displayed depending on the type of phone you have. This system does not have a charging function.

The receiving area

Rm is displayed when receiving in a roaming area. The receiving area may not be displayed depending on the type of phone you have.

The level of reception

Poor Excellent

The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. When the cellular phone is out of the service area or in a place inaccessible by radio waves, No Service is displayed.

1. PHONE OPERATION

118

The hands-free system enables calls to be made and received without having to take your hands off the steering wheel. This system supports Bluetooth . Bluetooth is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle. The operating procedure of the phone is explained here.

For registering and setting of the phone,

see PHONE SETTINGS on page 138 and Bluetooth SETTINGS on page 155.

CAUTION

While driving, do not use a cellular phone or connect the Bluetooth phone.

NOTICE

Do not leave your cellular phone in the vehicle. The temperature inside may rise to a level that could damage the phone.

INFORMATION

If your cellular phone does not support Bluetooth , this system cannot function.

In the following conditions, the system may not function: The cellular phone is turned off. The current position is outside the

communication area. The cellular phone is not connected. The cellular phone has a low battery.

When using Bluetooth audio and hands-free at the same time, the following problems may occur: The Bluetooth connection may be cut.

Noise may be heard on the Bluetooth audio playback.

This system supports the following services: Bluetooth Specification

Ver.1.1 or higher (Recommended: Ver.2.1 + EDR or higher)

Profiles HFP (Hands Free Profile) Ver.1.0 or higher (Recommended: Ver.1.5 or higher) OPP (Object Push Profile) Ver.1.1 or higher PBAP (Phone Book Access Profile) Ver.1.0 or higher MAP (Message Access Profile) Ver.1.0 or higher SPP (Serial Port Profile) Ver.1.1 or higher*

*: This profile is necessary when using Entune. (See ENTUNE SERVICE on page 246.)

INFORMATION If your cellular phone does not support

HFP, registering the Bluetooth phone or using OPP, PBAP, MAP or SPP profiles individually will not be possible.

If the connected Bluetooth phone version is older than recommended or incompatible, this function may not be used.

Refer to http://www.toyota.com/Bluetooth/ to find approved Bluetooth phones for this system.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE)

1. PHONE OPERATION

119

1

2

3

4

PH O

N E

USING THE PHONE SWITCH By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel.

The microphone can be used when talking

on the phone.

INFORMATION The other partys voice outputs from the

front speakers. When the received calls or received voice outputs, the audio from the audio system will be muted.

Talk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.)

Keep call volume down. Otherwise, the other partys voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone.

The other party may not hear you clearly when:

Driving on a unpaved road. (Making excessive traffic noise.)

Driving at the high speeds. The roof or windows are open. The air conditioning vents are pointed

towards the microphone. The sound of the air-conditioning fan is

loud. There is a negative effect on sound

quality due to the phone and/or network being used.

USING THE STEERING SWITCHES

Volume control switch Press the + side to increase the volume. Press the - side to decrease the volume.

ABOUT THE PHONEBOOK IN THIS SYSTEM

The following data is stored for every

registered phone. When another phone is connected, the following registered data cannot be read: Phonebook data All of call history Speed dial Image data Messages Quick reply messages Settings

1. PHONE OPERATION

120

INFORMATION When a phones registration is deleted,

the above-mentioned data is also deleted.

WHEN SELLING OR DISPOSING OF THE VEHICLE

A lot of personal data is registered when the hands-free system is used. When selling or disposing of the vehicle, initialize the data. (See DELETING PERSONAL DATA on page 45.)

The following data in the system can be

initialized: Phonebook data Call history data Speed dial data Bluetooth phone data Phone sound settings Phone display settings Message settings

INFORMATION

Once initialized, the data and settings will be erased. Pay much attention when initializing the data.

FCC ID : HYQDNNS061 This device complies with part 15 of the

FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID : HYQDNNS061 Ce dispositif est conforme la partie 15

des rgles de FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer dinterfrences nuisibles et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent causer un mauvais fonctionnement.

CAUTION

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

AVERTISSEMENT FCC: Tout changement ou toute modification de la construction non approuv expressment par labonn responsable de la conformit risque dannuler lautorit de lutilisateur dexploiter lquipement.

1. PHONE OPERATION

121

1

2

3

4

PH O

N E

CAUTION

CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles).

ATTENTION: Exposition au rayonnement de radiofrquence Cet quipement est conforme aux limites dexposition de rayonnement FCC dtermines pour lenvironnement non contrl et remplit les conditions des directives dexposition (RF) de radiofrquence de FCC dans le supplment C OET65. Cet quipement possde des niveaux trs faibles dnergie de radiofrquence qui sont considrs comme se conformer sans valuation de lexposition maximale permissive (MPE). Mais il est souhaitable quil devrait tre install et actionn avec au moins 20 cm ou plus entre le radiateur et le corps de la personne ( lexclusion des extrmits: mains, poignets, pieds et chevilles).

Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Co-implantation: cet metteur ne doit pas tre co-implant ou actionn en mme temps quaucune autre antenne ou metteur.

1. PHONE OPERATION

122

To use the hands-free system, it is necessary to register a phone with the system. Once the phone has been registered, it is possible to make a hands-free call. If a Bluetooth phone has not been registered yet, it is necessary to register it first according to the following procedure. A Bluetooth phone cannot be registered while driving.

See REGISTERING A Bluetooth

DEVICE on page 156 of additional registration when registering.

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Yes to register a phone.

If 5 Bluetooth devices have already been

registered, a registered device needs to be deleted. See When 5 Bluetooth devices have already been registered on page 123.

3 When this screen is displayed, input the passcode displayed on the screen into the phone.

For details about entering the passcode

into the Bluetooth device, see the manual that comes with it.

A passcode is not required for SSP (Secure Simple Pairing) compatible Bluetooth phones. Depending on the type of Bluetooth phone being connected, a message confirming registration may be displayed on the Bluetooth phones screen. Respond and operate the Bluetooth phone according to the confirmation message.

To cancel the registration, touch Cancel .

If the Bluetooth phone to be registered has a Bluetooth audio function, this can be registered at the same time.

4 This screen will be displayed when registration is complete.

When using the same phone, it is not

necessary to register it again.

3. REGISTER A Bluetooth PHONE

1. PHONE OPERATION

123

1

2

3

4

PH O

N E

When this screen is displayed, follow the guidance on the screen to try again.

When another Bluetooth device is connected

When another Bluetooth device is

currently connected, this screen is displayed.

To disconnect the Bluetooth device, touch Yes .

When 5 Bluetooth devices have already been registered

1 When 5 Bluetooth devices have already been registered, a registered device needs to be deleted. Touch Yes to delete one or more.

2 Touch the device to be deleted, then touch Remove .

3 Touch Yes .

If the Bluetooth phone has a Bluetooth audio function

When the Bluetooth phone to be

registered has a Bluetooth audio function, this audio function will be registered automatically at the same time and this screen may be displayed. If this screen is displayed, touch Yes to connect the audio function or touch No to cancel the connection.

CONNECTING A Bluetooth PHONE

AUTOMATICALLY When a phone is registered, auto connection is turned on. Always set it to this mode and leave the Bluetooth

phone in a location where connection can be established.

1. PHONE OPERATION

124

For automatic connection, see CHANGING Bluetooth* Power on page 162.

Vehicles with a smart key system When the POWER <ENGINE START

STOP> switch is in ACCESSORY or ON mode, the system searches for a nearby registered cellular phone.

The system will connect with the phone that was last connected, if it is nearby. When Display Phone Status is set to On , the connection status is displayed. (See Bluetooth DEVICE CONNECTION STATUS DISPLAY SETTINGS on page 164.)

This screen appears when the Bluetooth phone is first connected after the POWER <ENGINE START STOP> switch is in ACCESSORY or ON mode.

Vehicles without a smart key system When the engine switch is in the ACC or

ON position, the system searches for a nearby registered cellular phone.

The system will connect with the phone that was last connected, if it is nearby. When Display Phone Status is set to On , the connection status is displayed. (See Bluetooth DEVICE CONNECTION STATUS DISPLAY SETTINGS on page 164.)

This screen appears when the Bluetooth phone is first connected after the engine switch is in the ACC or ON position.

INFORMATION It may take time if the phone connection is

carried out during Bluetooth device playback.

MANUALLY When the auto connection has failed or Bluetooth* Power is turned off, it is necessary to connect Bluetooth manually.

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Connect Phone .

3 Touch the screen button corresponding to the desired phone connection.

When the cellular phones device name

has not been able to be obtained, Device 1 to Device 5 will be displayed in the order the phones were registered.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

1. PHONE OPERATION

125

1

2

3

4

PH O

N E

4 The Connect Bluetooth* screen is displayed.

5 When the connection is completed, this screen is displayed.

Now you can use the Bluetooth phone.

When a phone is connected while Bluetooth audio is playing

This screen is displayed, and the

Bluetooth audio will stop temporarily. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

RECONNECTING THE Bluetooth PHONE

Vehicles with a smart key system If a Bluetooth phone is disconnected due to poor reception from the Bluetooth network when the POWER <ENGINE START STOP> switch is in ACCESSORY or ON mode, the system automatically reconnects the Bluetooth phone. When Display Phone Status is set to On , the connection status is displayed.

Vehicles without a smart key system If a Bluetooth phone is disconnected due to poor reception from the Bluetooth network when the engine switch is in the ACC or ON position, the system automatically reconnects the Bluetooth phone. When Display Phone Status is set to On , the connection status is displayed.

If a Bluetooth phone is disconnected on

purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone manually.

1. PHONE OPERATION

126

After a Bluetooth phone has been registered, a call can be made using the hands-free system. There are 7 methods by which a call can be made. These are described below.

BY DIAL A call can be made by inputting the phone number. This cannot be operated while driving.

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch the desired key to input the phone number.

Each time is touched, an input digit is deleted.

3 Touch or press the switch on the steering wheel.

BY PHONEBOOK Calls can be made by using the phonebook data which is transferred from the registered cellular phone. The phonebook changes depending on the phone connected. Up to 1000 contacts (maximum of 3 numbers per contact) can be registered in each phonebook. This cannot be operated while driving.

1 Touch Contacts .

2 Touch the desired data from the list.

4. CALL ON THE Bluetooth PHONE

1. PHONE OPERATION

127

1

2

3

4

PH O

N E

3 Touch the desired number from the list.

4 Touch or press the switch on the steering wheel.

WHEN THE PHONEBOOK IS EMPTY

1 Touch Contacts .

2 Touch Yes or Transfer to automatically transfer the phonebook from the connected phone.

Touch Manual to transfer the phonebook manually. (See TRANSFERRING A PHONE NUMBER on page 141.)

Touch No or Cancel to cancel transferring.

If your cellular phone is neither PBAP nor OPP compatible, the phonebook cannot be transferred.

PBAP compatible models

PBAP incompatible but OPP compatible models

3 Transfer the phonebook data to the system using the Bluetooth phone.

Depending on the type of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter 1234 into the Bluetooth phone. (The number to be entered will vary depending on the type of cellular phone.)

This screen appears while transferring. To

cancel this function, touch Cancel .

1. PHONE OPERATION

128

4 When the data transfer from a PBAP incompatible but OPP compatible model is complete, Done will appear on the screen. Touch Done .

BY SPEED DIAL Calls can be made using registered phone numbers which can be selected from a phonebook. (See REGISTERING THE SPEED DIAL on page 146 for registering the speed dial.)

1 Touch Speed Dials .

2 Touch the desired number to call.

The list to be displayed can be changed by touching the Speed Dial 1 , Speed Dial 2 or Speed Dial 3 tab.

BY CALL HISTORY

CALLS CAN BE MADE BY CALL HISTORY WHICH HAS 4 FUNCTIONS

All : all calls (missed, incoming or outgoing) Up to 25 call history items can be selected from the All tab while driving. Missed : calls that were missed Incoming : calls that were received Outgoing : calls that were made

1 Touch Call History .

2 Touch the desired data from the list.

The list to be displayed can be changed by

touching the All , Missed , Incoming or Outgoing tab.

1. PHONE OPERATION

129

1

2

3

4

PH O

N E

3 Touch or press the switch on the steering wheel.

CALLS CAN BE MADE USING THE LATEST CALL HISTORY ITEM

1 Press the MENU button and touch Phone or the switch on the steering wheel to display the Phone screen.

2 Press the switch on the steering wheel to display the Call History screen.

3 Touch the latest history item from the list.

4 Touch or press the switch on the steering wheel to call the latest history item.

When making a call by phonebook, the name (if registered) is displayed.

When making a call to the same number continuously, only the most recent call is listed in call history.

When a phone number registered in the phonebook is received, the name and the number are displayed.

Number-withheld calls are also memorized in the system.

International phone calls may not be made depending on the type of cellular phone you have.

BY VOICE RECOGNITION Calls can be made by giving a voice command. (For the operation and command of voice recognition, see VOICE COMMAND SYSTEM on page 226.) This can be operated while driving.

VOICE COMMAND EXAMPLE: CALL NAME

1 Press the talk switch. Call is displayed in the

Shortcut Menu screen. When Call on the

Shortcut Menu screen is dimmed, the phonebooks voice command recognition cannot be used. Check the Bluetooth connection and if the contacts have been transferred to the navigation system.

1. PHONE OPERATION

130

2 Say the name, or the name and type of phone, of a registered contact.

In the same manner as it is displayed on the screen, Call , after saying Call say the name, or the name and type of phone, of a contact. For example: Call , John Smith or Call , Mary Davis , Mobile

There are 4 types of phones: Home, Mobile, Office and Other.

Short or abbreviated names in the phonebook may not be recognized. Change names in the phonebook to full names.

Sometimes a voice recognition result confirmation screen will be displayed. After confirming the result, say Yes or No .

When the system recognizes multiple names from the phonebook, a name candidate list will be displayed on the screen. If the desired name is not displayed on the top of the screen, say the number of the name from the candidate list (number 1 and number 2) to select a name from the candidate list.

When a contact has multiple phone numbers registered in the phonebook, a candidate list will be displayed. If the desired phone number is not displayed on the top of the screen, say the number of the desired phone number from the candidate list (number 1 and number 2) to select a phone number from the candidate list.

3 Say Dial to call the phone number.

VOICE COMMAND EXAMPLE: DIAL NUMBER

1 Press the talk switch. Dial is displayed in the

Shortcut Menu screen. When Dial on the Shortcut

Menu screen is dimmed, the phone number voice recognition cannot be used. Check the Bluetooth phone connection.

2 Say the phone number. In the same manner as it is displayed on

the screen, Dial , after saying Dial say the phone number.

Say the phone number one digit at a time. For example, if the phone number is 2345678: Say two three four five six seven eight Do not say twenty three forty five sixty seven eight

The system can recognize the following types of phone numbers: 3 digit numbers (911, 411, 611) 7 digit numbers (Local phone numbers) 10 digit numbers (Area code + Local phone number) 11 digit phone numbers (1 + Area code + Local phone number)

As the system cannot recognize additional numbers, say the complete number without stopping.

When the system recognizes multiple phone numbers, a phone number candidate list will be displayed on the screen. If the desired phone number is not displayed on the top of the screen, say the number of the desired phone number from the candidate list (number 1 and number 2) to select a phone number from the candidate list.

3 Say Dial to call the phone number.

1. PHONE OPERATION

131

1

2

3

4

PH O

N E

INTERNATIONAL CALL To dial a phone number that is not a 3, 7, 10 or 11 digit number, for example an international number, use International Call.

1 Go to the Main Menu screen by pressing the talk switch on the steering wheel and saying Main menu or touch the Main Menu screen button.

2 Say Use a phone .

3 Say International call . Up to 24 digits can be recognized when

using the international call function. The number can also be divided into multiple groups and recognized.

Calling without the voice recognition : After the desired phone number is displayed, a call can also made by pressing the switch on the steering wheel. Canceling the voice recognition : The voice recognition will be canceled when either of the following is performed:

Press and hold the talk switch. Touch Cancel .

CALLING USING AN SMS/MMS MESSAGE

Calls can be made to an SMS (Short Message Service)/MMS (Multimedia Messaging Service) message senders phone number. This can be operated while driving.

1 Touch Messages .

When Message Transfer is set to

Off , a confirmation screen will be displayed. Touch Yes .

2 Touch the SMS/MMS tab and then touch the desired received message from the list.

The tab display may vary depending on the type of cellular phone.

3 Touch or press the switch on the steering wheel.

BY POI* CALL A call can be made by touching

when it is displayed on the screen from the navigation system. (See TO SEE INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET on page 34.)

*: Point of Interest

1. PHONE OPERATION

132

When a call is received, this screen is displayed with a sound.

1 Touch or press the switch on the steering wheel to talk on the phone.

To refuse to receive the call : Touch

or press the switch on the steering wheel. To adjust the volume of a received call : Touch - or + , turn the PWRVOL knob, or use the volume switch on the steering wheel.

INFORMATION

During international phone calls, the other partys name or number may not be displayed correctly depending on the type of cellular phone you have.

The incoming call display mode can be set. (See INCOMING CALL DISPLAY on page 154.)

5. RECEIVE ON THE Bluetooth PHONE

1. PHONE OPERATION

133

1

2

3

4

PH O

N E

While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen.

To adjust the volume of the other partys voice : Touch - or + , turn the PWRVOL knob, or use the volume switch on the steering wheel.

To hang up the phone : Touch or press the switch on the steering wheel. To mute your voice : Touch Mute . To input a key : Touch 0-9 . To transfer the call : Touch Handset Mode to change from hands-free call to cellular phone call. Touch Handsfree Mode to change from cellular phone call to hands-free call.

INFORMATION

Changing from hands-free call to cellular phone call is not possible while driving.

When cellular phone call is changed to hands-free call, the hands-free screen will be displayed and its functions can be operated on the screen.

Changing between cellular phone call and hands-free call can be performed by operating the cellular phone directly.

Transferring methods and operations will be different depending on the type of cellular phone you have.

For the operation of the cellular phone, see the manual that comes with it.

WHEN YOU SELECT 0-9 INPUTTING A KEY Inputting a key is not possible while driving.

1 Touch the desired number to input the key.

To hang up the phone : Touch or press the switch on the steering wheel.

TONE SIGNAL If a continuous tone signal is registered in a phonebook, this screen appears. (If not registered, Send and Clear are not displayed.) This can be operated while driving.

6. TALK ON THE Bluetooth PHONE

1. PHONE OPERATION

134

1 Confirm the number displayed on the screen and touch Send . The number before marked sign will be sent.

When Clear is touched, this function is

finished and the normal tone screen appears.

To hang up the phone : Touch or press the switch on the steering wheel.

INFORMATION

The continuous tone signal is the marked sign (p or w) and the number that follows the phone number. (e.g. 056133w0123p#1 * )

When the p pause tone is used, after waiting 2 seconds the tone data up until the next pause tone will be automatically sent. When the w pause tone is used, the tone data up until the next pause tone will be automatically sent after user operation.

This operation can be done when it is desirable to operate an answering machine or use a telephone service in a bank for example. The phone number and the code number in the phonebook can be registered.

BY VOICE RECOGNITION Send Tones can be operated by giving a command during a call.

The operating procedure is similar to other voice recognition operations. (For the operation of voice recognition, see VOICE COMMAND SYSTEM on page 226.)

INCOMING CALL WAITING

When a call is interrupted by a third party while talking, this screen is displayed.

1 Touch or press the switch on the steering wheel to start talking with the other party.

Touch or press the switch on the steering wheel to refuse the call.

Each time is touched or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched.

INFORMATION

If your cellular phone does not support HFP Ver. 1.5, this function cannot be used.

1. PHONE OPERATION

135

1

2

3

4

PH O

N E

Received messages can be forwarded from the connected Bluetooth phone, enabling checking and replying using the navigation system (Quick reply).

CHECKING MESSAGES

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Messages .

When Message Transfer is set to

Off , a confirmation screen will be displayed. Touch Yes .

3 Touch the screen button corresponding to the desired message.

Messages are displayed in the appropriate connected Bluetooth phones registered mail address folder. Touch the tab of the desired folder to be displayed.

4 Messages can be checked.

Touching Previous or Next displays

the previous or next message.

Only received messages on the connected Bluetooth phone can be displayed.

The text of the message is not displayed while driving.

5 Touch Play to start reading out of the message. Touch Stop to stop the function.

Touch - or + , turn the PWRVOL knob, or use the volume switch on the steering wheel to adjust the message read out volume.

The message read out function is available even while driving.

When the received message is an

e-mail and Update Message Read Status on Phone is set to On , Mark as Unread or Mark as Read can be selected. Touch Mark as Unread to mark mails that have been read on the Bluetooth phone as unread. Conversely, touch Mark as Read to mark mails that have not been read on the Bluetooth phone as read. (See MESSAGE SETTINGS on page 150.)

For SMS/MMS, touching or pressing the switch on the steering wheel calls the sender. (See page 131.)

Touch Reply to reply to the message. (See page 135.)

REPLYING (QUICK REPLY)

1 Touch Reply .

7. Bluetooth PHONE MESSAGE FUNCTION

1. PHONE OPERATION

136

2 Touch the screen button corresponding to the desired message.

3 Touch Send . While the message is being sent, a

sending message screen is displayed.

4 This screen will be displayed if message delivery fails.

Touch Retry to attempt to send the

message again or touch Cancel to cancel.

EDITING REPLY MESSAGES

1 Reply messages can be edited while the vehicle is parked. Touch Edit .

2 Touch the screen button corresponding to the desired message.

3 Touch OK when editing is completed.

4 Touch .

1. PHONE OPERATION

137

1

2

3

4

PH O

N E

NEW MESSAGE NOTIFICATION

If New Message Pop-up and New Message Voice Notification are set to On , a notification appears on the screen and a voice notification will be heard when a new message arrives. (See MESSAGE SETTINGS on page 150.)

1 Touch Read to check the message. The Messages screen will be displayed. When Automatic Message Readout is

set to On , the message will be automatically read out. (See MESSAGE SETTINGS on page 150.)

For SMS/MMS, touching or

pressing the switch on the steering wheel calls the sender. (See page 131.)

To check the message later, touch Ignore or .

2. SETUP

138

The phonebook can be edited. Volume, display and message settings can also be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone .

4 Perform each setting according to the procedures outlined on the following pages.

PHONE SOUND SETTINGS The call and ring tone volume can be adjusted. A ring tone can be selected.

1 Touch Phone Sound Settings .

2 Perform each setting according to the procedures outlined on the following pages.

3 When all settings are completed, touch Save .

INFORMATION

The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h).

2. SETUP

1. PHONE SETTINGS

2. SETUP

139

1

2

3

4

PH O

N E

CALL VOLUME SETTING

1 Touch Call Volume on the Phone Sound Settings screen.

2 Touch - or + to adjust the call volume.

3 Touch OK . RING TONE VOLUME SETTING

1 Touch Ring Tone Volume on the Phone Sound Settings screen.

2 Touch - or + to adjust the ring tone volume.

3 Touch OK .

RING TONE SETTING

1 Touch Ring Tone on the Phone Sound Settings screen.

2 Touch the screen button corresponding to the desired ring tone.

Ring tones can be heard by touching the

screen buttons.

3 Touch OK . INITIALIZING THE SETTINGS The settings can be initialized.

1 Touch Default on the Phone Sound Settings screen.

2 Touch Yes .

PHONEBOOK The call history can be deleted and phonebook and speed dial settings can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone on the Setup screen.

2. SETUP

140

4 Touch Phonebook .

5 Perform each setting according to the procedures outlined on the following pages.

INFORMATION Phonebook data is managed

independently for every registered phone. When one phone is connected, another phones registered data cannot be read.

SETTING THE PHONEBOOK The phonebook can be transferred from a Bluetooth phone to the system. The phonebook also can be deleted.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone on the Setup screen.

4 Touch Phonebook on the Phone Settings screen.

5 Touch Manage Contacts .

6 Perform each setting according to the procedures outlined on the following pages.

THE Contacts SCREEN CAN ALSO BE DISPLAYED

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Contacts on the Phone screen.

3 Touch Options .

2. SETUP

141

1

2

3

4

PH O

N E

4 Touch Manage Contacts .

TRANSFERRING A PHONE NUMBER

The phone numbers in a Bluetooth phone can be transferred to the system. The system can manage up to 5 phonebooks. Up to 1000 contacts (maximum of 3 numbers per contact) can be registered in each phonebook. Operation methods differ between PBAP compatible and PBAP incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the phonebook cannot be transferred.

For PBAP compatible Bluetooth phones

1 Touch Transfer Contacts .

2 Touch Update Contacts .

3 Transfer the phonebook data to the system using the Bluetooth phone.

Depending on the type of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter 1234 into the Bluetooth phone. (The number to be entered will vary depending on the type of cellular phone.)

This screen appears while transferring. To

cancel this function, touch Cancel . If another Bluetooth device is connected

when transferring phonebook data, depending on the phone, the connected Bluetooth device may need to be disconnected.

2. SETUP

142

PBAP compatible models automatic data transfer setting

When a PBAP compatible phone is connected, the phones phonebook data can be automatically transferred.

1 Touch Transfer Contacts.

2 Touch Automatically Download Contacts to transfer the phonebook from a connected cellular phone. Touch Automatically Download Call History to transfer the call history from a connected cellular phone.

3 Touch On .

4 Touch Save.

For PBAP incompatible but OPP compatible Bluetooth phones

1 Touch Transfer Contacts .

2 Touch Replace Contacts or Add Contacts .

If the phonebook contains phonebook data,

this screen is displayed.

3 Transfer the phonebook data to the system using the Bluetooth phone.

Depending on the type of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter 1234 into the Bluetooth phone. (The number to be entered will vary depending on the type of cellular phone.)

2. SETUP

143

1

2

3

4

PH O

N E

This screen appears while transferring. To cancel this function touch Cancel . If Add Contacts is touched and there is an interruption during the transfer of data, the phonebook data transferred until then will be stored in the system. This is not the case when Cancel is touched.

4 When the transfer is complete, Done will appear on the screen. Touch Done .

When another Bluetooth device is connected

When another Bluetooth device is

currently connected, this screen is displayed.

To disconnect it, touch Yes .

From Contacts screen

Phonebooks of PBAP incompatible but OPP compatible phones can also be transferred from the Contacts screen.

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Contacts on the Phone screen.

3 Touch Transfer .

4 This screen is displayed. The following operations are performed in the same manner as when they are performed from the Setup screen.

2. SETUP

144

DELETING THE PHONEBOOK DATA

The data can be deleted. When selling or disposing of the vehicle, delete all your data on the system. For PBAP compatible phones, delete the phonebook data after setting Automatically Download Contacts to Off . (See PBAP compatible models automatic data transfer setting on page 142.)

1 Touch Delete Contacts .

2 Touch the desired data or Select All , then touch Delete .

Multiple data can be selected and deleted

at the same time.

3 Touch Yes .

ALTERNATIVE PHONEBOOK DATA DELETION METHOD

PBAP incompatible but OPP compatible models

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Contacts on the Phone screen.

3 Touch the desired data from the list on the Contacts screen.

4 Touch Options .

5 Touch Delete .

6 Touch Yes .

INFORMATION When a Bluetooth phone is deleted, the

phonebook data will be deleted at the same time.

2. SETUP

145

1

2

3

4

PH O

N E

SPEED DIALS SETTING Speed dials can be registered and deleted.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone on the Setup screen.

4 Touch Phonebook on the Phone Settings screen.

5 Touch Manage Speed Dials .

6 Perform each setting according to the procedures outlined on the following pages.

THE Speed Dials SCREEN CAN ALSO BE DISPLAYED

From the Speed Dial screen

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Speed Dials on the Phone screen.

3 Touch Options .

From the Contacts screen

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Contacts on the Phone screen.

3 Touch Options .

4 Touch Manage Speed Dials .

2. SETUP

146

REGISTERING THE SPEED DIAL Speed dial numbers can be registered by selecting the desired number from the phonebook. Up to 18 numbers per phone can be registered as a speed dial.

1 Touch New .

2 Touch the desired data to be registered.

3 Touch the desired phone number.

4 Touch the desired speed dial location.

5 If a location that is already in use is touched, this screen will be displayed.

Touch Yes to replace it.

6 When this screen is displayed, the operation is complete.

THE SPEED DIAL CAN ALSO BE REGISTERED

From the Speed Dial screen

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Speed Dials on the Phone screen.

2. SETUP

147

1

2

3

4

PH O

N E

3 Touch (add new) .

4 Touch Yes to set new speed dial.

5 Touch the desired data to be registered.

6 Touch the desired phone number.

From the Contact screen

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Contacts on the Phone screen.

3 Touch the desired data from the list on the Contacts screen.

4 Touch Options .

5 Touch Set Speed Dial .

6 This screen is displayed.

The following operations are performed in

the same manner as when they are performed from the Setup screen.

2. SETUP

148

DELETING THE SPEED DIAL The speed dial can be deleted.

1 Touch Delete .

2 Touch the desired data, or to delete all the data touch Select All , then touch Delete .

Multiple data can be selected and deleted

at the same time.

3 Touch Yes . DELETING CALL HISTORY The call history can be deleted. For PBAP compatible phones, delete the call history after setting Automatically Download Call History to Off . (See PBAP compatible models automatic data transfer setting on page 142.)

1 Touch Delete Call History .

2 Touch the desired history to delete.

3 Touch the desired data, or to delete all the data touch Select All , then touch Delete .

Multiple data can be selected and deleted

at the same time.

4 Touch Yes .

2. SETUP

149

1

2

3

4

PH O

N E

THE CALL HISTORY CAN ALSO BE DELETED

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Call History on the Phone screen.

3 Touch Delete .

4 This screen is displayed.

The following operations are performed in

the same manner as when they are performed from the Setup screen.

Other call history can be operated similarly.

Deleting after call history has been displayed

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Call History on the Phone screen.

3 Touch the desired history to be deleted.

4 Touch Delete .

5 Touch Yes .

2. SETUP

150

MESSAGE SETTINGS Message settings can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone on the Setup screen.

4 Touch Messaging Settings .

5 Perform each setting according to the procedures outlined on the following pages.

6 Touch Save when each setting is completed.

THE Messaging Settings SCREEN CAN ALSO BE DISPLAYED

1 Press the MENU button and touch Phone or the switch on the steering wheel.

2 Touch Messages on the Phone screen.

3 Touch Options .

SCREEN FOR Messaging Settings

On this screen, the following functions can

be operated:

No. Function

Touch to set message forwarding from cellular phones to On or Off .

Touch to set the new message notification display to On or Off .

Touch to set the new message voice notification to On or Off .

2. SETUP

151

1

2

3

4

PH O

N E

No. Function

Touch to adjust the new message notification volume. (See NEW MESSAGE NOTIFICATION VOLUME SETTINGS on page 151.)

Touch to select a new message voice notification tone. (See NEW MESSAGE NOTIFICATION TONE SETTINGS on page 151.)

Touch to set the automatic message read out function to On or Off .

Touch to adjust the message read out volume. (See MESSAGE READ OUT VOLUME SETTINGS on page 152.)

Touch to set the cellular phones message read and unread status update function to On or Off .

Touch to edit Edit Quick Reply Messages. (See EDIT QUICK REPLY MESSAGES on page 152.)

To reset all setup items, touch Default .

NEW MESSAGE NOTIFICATION VOLUME SETTINGS

The new message notification volume can be adjusted.

1 Touch New Message Notification Volume .

2 Touch - or + to adjust the new message notification volume.

3 Touch OK .

INFORMATION The system will automatically increase

the volume when the speed exceeds 50 mph (80 km/h).

NEW MESSAGE NOTIFICATION TONE SETTINGS

A new message voice notification tone can be selected.

1 Touch New Message Notification Tone .

2. SETUP

152

2 Touch the desired new message notification tone.

New message notification tones can be

heard by touching the screen buttons.

3 Touch OK .

MESSAGE READ OUT VOLUME SETTINGS

Message read out volume can be adjusted.

1 Touch Message Readout Volume .

2 Touch - or + to adjust the message read out volume.

3 Touch OK .

INFORMATION

The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h).

EDIT QUICK REPLY MESSAGES

Quick reply messages can be edited. 15 messages have already been stored.

1 Touch Edit Quick Reply Messages .

2 Touch the screen button corresponding to the desired message.

3 Use the software keyboard to edit the message.

4 Touch OK .

2. SETUP

153

1

2

3

4

PH O

N E

INITIALIZING THE SETTINGS The settings can be initialized.

1 Touch Default .

2 Touch Yes .

PHONE DISPLAY SETTINGS The phone display settings can be changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Phone on the Setup screen.

4 Touch Phone Display Settings .

5 Perform each setting according to the procedures outlined on the following pages.

6 When each setting is completed, touch Save .

SCREEN FOR Phone Display Settings

On this screen, the following functions can

be operated:

No. Function

Touch to change the incoming call display. (See INCOMING CALL DISPLAY on page 154.)

For PBAP compatible models, touch to set the display of the automatic phonebook transfer completion message to On or Off .

To reset all setup items, touch Default .

2. SETUP

154

INCOMING CALL DISPLAY The type of incoming call display can be selected.

1 Touch Incoming Call Display Mode .

2 Touch Full Screen or Drop Down .

3 Touch Save .

Screen button Function

Full Screen mode

When a call is received, the hands-free screen is displayed and it can be operated on the screen.

Drop Down mode

The message is displayed on the upper side of the screen.

INITIALIZING THE SETTINGS The settings can be initialized.

1 Touch Default .

2 Touch Yes .

2. SETUP

155

1

2

3

4

PH O

N E

A Bluetooth device can be set up.

1 Press the MENU button.

2 Touch Setup .

3 Touch Bluetooth* .

4 Perform each setting according to the

procedures outlined on the following pages.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

REGISTERED DEVICES A Bluetooth device can be registered, deleted or set up.

1 Press the MENU button.

2 Touch Setup .

3 Touch Bluetooth* on the Setup screen.

4 Touch Registered Devices .

5 Perform each setting according to the procedures outlined on the following pages.

2. Bluetooth SETTINGS

2. SETUP

156

REGISTERING A Bluetooth DEVICE

Bluetooth devices compatible with phones (HFP) and portable players (AVP) can be registered simultaneously. Phones (HFP) and portable players (AVP) (maximum of 5) can be registered.

1 Touch Add New to register a Bluetooth device to the system.

If 5 Bluetooth devices have already been

registered, a registered device needs to be deleted. See When 5 Bluetooth devices have already been registered on page 157.

2 When this screen is displayed, input the passcode displayed on the screen into the Bluetooth device.

For details about entering the passcode

into the Bluetooth device, see the manual that comes with it.

A passcode is not required for SSP (Secure Simple Pairing) compatible Bluetooth devices. Depending on the type of Bluetooth phone being connected, a message confirming registration may be displayed on the Bluetooth phones screen. Respond and operate the Bluetooth phone according to the confirmation message.

To cancel the registration, touch Cancel .

3 When the connection is completed, this screen is displayed.

When using the same device, it is not

necessary to register it again.

When this screen is displayed, follow the

guidance on the screen to try again.

2. SETUP

157

1

2

3

4

PH O

N E

When another Bluetooth device is

currently connected, this screen is displayed.

To disconnect the Bluetooth device, touch Yes .

When 5 Bluetooth devices have already been registered

1 When 5 Bluetooth devices have already been registered, a registered device needs to be deleted. Touch Yes to delete one or more.

2 Touch the device to be deleted, then touch Remove .

3 Touch Yes .

DELETING A Bluetooth DEVICE

1 Touch Remove .

2 Touch the desired device, or to delete all the devices touch Select All , then touch Remove .

Multiple devices can be selected and

deleted at the same time.

3 Touch Yes .

INFORMATION When deleting a Bluetooth phone, the

phonebook data will be deleted at the same time.

EDITING THE Bluetooth DEVICE

The Bluetooth devices information can be displayed on the screen. The displayed information can also be edited.

Device Name : The name of the Bluetooth device which is displayed on the screen. It can be changed to a desired name.

Even if the device name is changed, the name registered in your Bluetooth device does not change.

2. SETUP

158

Device Address : The device address is unique to each device. It cannot be changed.

If two Bluetooth devices have been registered with the same device name, the devices can be distinguished referring to the devices address.

My Phone Number : The phone number of the Bluetooth phone is displayed on the screen. Depending on the type of phone, the phone number may not be displayed. Profiles : The compatibility profile of the Bluetooth device is displayed on the screen. Connect Portable Player from : There are 2 portable player connection settings available; Vehicle and Portable Player .

CHANGING A DEVICE NAME

1 Touch Details .

2 Touch the device to be edited.

3 Touch Device Name .

4 Use the software keyboard to input the device name and touch OK .

5 Confirm the device name and touch OK .

SETTING PORTABLE PLAYER CONNECTION METHOD

1 Touch Connect Portable Player from .

2. SETUP

159

1

2

3

4

PH O

N E

2 Touch the desired connection method.

Vehicle : Touch to connect the audio system to the portable player. Portable Player :Touch to connect the portable player to the audio system. Depending on the portable player, the

Vehicle or Portable Player connection method may be best. As such, refer to the manual that comes with the portable player.

3 Touch OK .

SELECTING A Bluetooth PHONE

If more than one Bluetooth phone has been registered, it is necessary to select which phone to connect to. It is possible to select from up to 5 registered Bluetooth devices (Phones (HFP) and portable players (AVP) (maximum of 5) can be registered.) Although up to 5 Bluetooth phones can be registered in the system, only one Bluetooth phone can function at a time.

1 Press the MENU button.

2 Touch Setup .

3 Touch Bluetooth* on the Setup screen.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

4 Touch Connect Phone .

5 Touch the phone to be connected.

The indicator of the selected Bluetooth

phone will turn on.

If the desired Bluetooth phone is not on the list, touch Add New to register the phone. (See page 156.)

The currently connected Bluetooth phones screen button will have a Bluetooth mark displayed on it. If the currently connected Bluetooth phones screen button is touched, the Bluetooth phone can be disconnected. Touch Yes to disconnect.

6 The Connect Bluetooth* screen is displayed.

2. SETUP

160

7 When the result message is displayed, the Bluetooth phone can be used.

When a phone is connected while Bluetooth audio is playing

This screen is displayed, and the Bluetooth audio will stop temporarily.

When another Bluetooth device is connected

When another Bluetooth device is currently connected, this screen is displayed. To disconnect the Bluetooth device, touch Yes .

SELECTING PORTABLE PLAYER

If more than one portable player has been registered, it is necessary to select which portable player to connect to. It is possible to select from up to 5 registered Bluetooth devices (Phones (HFP) and portable players (AVP) (maximum of 5) can be registered.) Although up to 5 portable players can be registered in the system, only one portable player can function at a time.

1 Press the MENU button.

2 Touch Setup .

3 Touch Bluetooth* on the Setup screen.

4 Touch Connect Portable Player .

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

2. SETUP

161

1

2

3

4

PH O

N E

5 Touch the desired portable player to be connected.

The indicator of the selected portable

player will turn on. If the desired portable player is not on

the list, touch Add New to register the portable player. (See page 156.)

The currently connected portable players screen button will have a Bluetooth mark displayed on it. If the currently connected portable players screen button is touched, the portable player can be disconnected. Touch Yes to disconnect.

6 The Connect Bluetooth* screen is displayed.

7 When the result message is displayed,

the portable player can be used.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

When another Bluetooth device is connected

When another Bluetooth device is currently connected, this screen is displayed. To disconnect it, touch Yes .

DETAILED Bluetooth SETTINGS

The Bluetooth settings can be confirmed and changed.

1 Press the MENU button.

2 Touch Setup .

3 Touch Bluetooth* on the Setup screen.

4 Touch Detailed Bluetooth* Settings .

2. SETUP

162

5 This screen is displayed.

The information displays the following

items: Screen button Information

Device Name

This name will be displayed on the device when it is connected. It can be changed to a desired name.

Passcode

The password that was set when the Bluetooth device was registered can be changed.

Device Address

The device address is unique to each device. It cannot be changed.

Profiles

The compatibility profile of the Bluetooth device is displayed on the screen. (See pages 118 and 198.)

If it is desirable to change the settings, refer to the following pages.

When the settings have been changed, touch Save.

CHANGING THE Bluetooth SETTINGS

The Bluetooth settings can be changed according to the following procedures.

CHANGING Bluetooth* Power The Bluetooth* Power display shows the following state.

When Bluetooth* Power is On :

Vehicles with a smart key system The Bluetooth device is automatically connected when the POWER <ENGINE START STOP> switch is in ACCESSORY or ON mode.

Vehicles without a smart key system The Bluetooth device is automatically connected when the engine switch is turned to the ACC or ON position. When Bluetooth* Power is Off : The Bluetooth device is disconnected, and the system will not connect to it next time. The Bluetooth* Power auto connection

state can be set on or off. On : The auto connection is turned

on. Off : The auto connection is turned

off. The auto connection state cannot be

changed from On to Off while driving, but it can be changed from Off to On .

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

2. SETUP

163

1

2

3

4

PH O

N E

1 Touch Bluetooth* Power .

2 Touch On or Off .

3 Touch Save . In the event the state of Bluetooth*

Power is changed from Off to On , Bluetooth connection will begin.

EDITING THE DEVICE NAME

1 Touch Device Name .

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

2 Use the software keyboard to input the device name and touch OK .

3 Touch Save .

EDITING THE PASSCODE

1 Touch Passcode .

2 Input a passcode and touch OK .

3 Touch Save .

2. SETUP

164

Bluetooth DEVICE CONNECTION STATUS DISPLAY SETTINGS

Vehicles with a smart key system When Bluetooth* Power is On and the POWER <ENGINE START STOP> switch is in ACCESSORY or ON mode, the Bluetooth phone and portable players connection status can be displayed. (See CHANGING Bluetooth* Power on page 162.)

Vehicles without a smart key system When Bluetooth* Power is On and the engine switch is in the ACC or ON position, the Bluetooth phone and portable players connection status can be displayed. (See CHANGING Bluetooth* Power on page 162.)

1 Touch Display Phone Status or Display Portable Player Status .

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

2 Touch On .

3 Touch Save .

INITIALIZING THE Bluetooth SETTINGS

The settings can be initialized.

1 Touch Default .

2 Touch Yes . If the state of Bluetooth* Power is

changed from Off into On , Bluetooth connection will begin.

165

1

2

3

4

5

AU D

IO SYSTEM

5

AUDIO SYSTEM

1 AUDIO SYSTEM OPERATION

1. QUICK REFERENCE .................167

2. SOME BASICS...........................168 VOICE COMMAND SYSTEM ...169 AUDIO SPLIT SCREEN

DISPLAY ..............................169 TURNING THE SYSTEM

ON AND OFF .......................169 SWITCHING BETWEEN

FUNCTIONS ........................170 DSP CONTROL........................171 TONE AND BALANCE..............171 CD PLAYER..............................172 AUX PORT ...............................172 USB PORT ...............................172

3. RADIO OPERATION ..................173 LISTENING TO THE RADIO.....173 PRESETTING A STATION........174 SELECTING A STATION...........174 RADIO BROADCAST DATA

SYSTEM ..............................174 TRAFFIC ANNOUNCEMENT ...175

4. HD Radio TECHNOLOGY INFORMATION.........................176 USING HD Radio

TECHNOLOGY ....................176 AVAILABLE HD Radio

TECHNOLOGY ....................177 TROUBLESHOOTING

GUIDE..................................178

5. RADIO OPERATION (XM Satellite Radio BROADCAST)* ............. 179 HOW TO SUBSCRIBE TO

AN XM Satellite Radio ......... 179 DISPLAYING THE RADIO ID ... 179 LISTENING TO

SATELLITE RADIO.............. 180 CHANNEL CATEGORY............ 180 PRESETTING A CHANNEL ..... 180 SELECTING A CHANNEL ........ 181 IF THE SATELLITE RADIO

TUNER MALFUNCTIONS ... 182

6. RADIO OPERATION (INTERNET RADIO BROADCAST)............. 184 LISTENING TO INTERNET

RADIO ................................. 184

7. CD PLAYER OPERATION ......... 185 INSERTING A DISC ................. 185 EJECTING A DISC ................... 185 PLAYING A DISC...................... 185 PLAYING AN AUDIO DISC....... 185 PLAYING AN MP3/WMA

DISC .................................... 187 IF THE PLAYER

MALFUNCTIONS................. 190

8. USB MEMORY OPERATION ..... 191 CONNECTING A

USB MEMORY .................... 191 PLAYING A USB MEMORY...... 191

9. iPod OPERATION...................... 195 CONNECTING iPod ................. 195 PLAYING iPod.......................... 195

*: If equipped

166

10. Bluetooth AUDIO OPERATION.............................198 CONNECTING A Bluetooth

AUDIO PLAYER ...................200 PLAYING Bluetooth AUDIO....202

11. DVD PLAYER OPERATION (rear seat entertainment system)*...................................206 INSERTING A DISC..................206 EJECTING A DISC ...................207 PLAYING A DISC......................207 PLAYING AN AUDIO DISC .......207 PLAYING AN MP3 DISC...........209 PLAYING A VIDEO CD DISC....211 OPERATING A DVD DISC........211 PLAYING A DVD DISC .............212 DVD SETTINGS .......................212 IF THE PLAYER

MALFUNCTIONS.................213 DVD PLAYER AND DVD VIDEO

DISC INFORMATION...........213

12. AUDIO REMOTE CONTROLS (STEERING SWITCHES) .........214

13. AUDIO SYSTEM OPERATING HINTS.......................................215 RADIO RECEPTION.................215 iPod...........................................216 USB MEMORY .........................216 CARING FOR YOUR CD

PLAYER, DVD PLAYER* AND DISC ............................216

MP3/WMA FILES......................218 CD-R AND CD-RW DISCS .......220 TERMS .....................................220

2 SETUP

1. AUDIO SETTINGS......................224 HD Radio SYSTEM

SETTINGS ...........................224 iPod SETTINGS........................224

*: Vehicles with rear seat entertainment system (OPTION)

1. AUDIO SYSTEM OPERATION

167

1

2

3

4

5

AU D

IO SYSTEM

Operations such as selecting a preset station and adjusting the sound balance are carried out on the screen. Press the MENU button and touch Radio or Media to display the audio screen.

No. Name Function Page

Function menu tab

Touch the screen tabs to select the desired radio or media mode. 170

Function menu display screen

Touch the screen buttons to control the selected radio or media mode. 170

button Press to insert or eject a disc. 172, 185

SEEK/TRACK button

Press the or button to seek up or down for a station, or to access a desired track, file or chapter. Press and hold the or button to fast forward or rewind the disc or player.

174, 186

PWRVOL knob

Press to turn the audio system on and off, and turn to adjust the volume. 169

1. AUDIO SYSTEM OPERATION

1. QUICK REFERENCE

1. AUDIO SYSTEM OPERATION

168

This section describes some of the basic features of the audio system. Some information may not pertain to your system.

Vehicles with a smart key system Your audio system works when the POWER <ENGINE START STOP> switch is turned to ACCESSORY or ON mode.

Vehicles without a smart key system Your audio system works when the engine switch is turned to the ACC or ON position.

CAUTION

For vehicles sold in U.S.A. and Canada: Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regulations, must be used with a distance of at least 7.9 in. (20 cm) between the antenna and the body of any person at all time during use.

Laser products Do not take this unit apart or attempt

to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages.

This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

NOTICE

To prevent the 12-volt battery from being discharged, do not leave the audio system on longer than necessary when the hybrid system is off .

2. SOME BASICS

1. AUDIO SYSTEM OPERATION

169

1

2

3

4

5

AU D

IO SYSTEM

VOICE COMMAND SYSTEM Press this switch to operate the voice command system.

For the operation of the voice command system and its list of commands, see pages 226 and 233.

AUDIO SPLIT SCREEN DISPLAY

The audio split screen can be displayed while the map screen is displayed. For details, see page 38.

TURNING THE SYSTEM ON AND OFF

1 Press the PWRVOL knob to turn off the power.

Turn this knob to adjust the volume. The

system turns on in the last mode used. A function that enables automatic return

to the previous screen from the audio screen can be selected. See page 41 for details.

1. AUDIO SYSTEM OPERATION

170

SWITCHING BETWEEN FUNCTIONS

1 Press the MENU button.

2 Touch the Radio or Media .

Radio : To display the AM, FM, SAT and Apps tabs on the screen. (Radio mode) Media : To display the DISC, R-DISC*, USB, iPod, BT Audio and AUX tabs on the screen. (Media mode) *: Vehicles with rear seat entertainment

system (OPTION)

3 Touch the desired mode tab.

Up to 4 tabs can be displayed on the screen. Touch or , located either side of the screen tabs, to display tabs from the previous or next page.

The desired audio mode can be found by touching or and then selecting that audio mode tab.

INFORMATION

If a disc is not inserted, the CD player or DVD player* cannot be turned on.

The CD player or DVD player* can be turned off by ejecting a disc.

When radio or media mode is selected, the respective screen buttons are displayed on the screen.

Dimmed screen buttons cannot be operated.

If the system does not respond to a touch of a screen button, move your finger away from the screen and then touch it again.

Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen.

*: Vehicles with rear seat entertainment system (OPTION)

1. AUDIO SYSTEM OPERATION

171

1

2

3

4

5

AU D

IO SYSTEM

DSP CONTROL

1 Press the MENU button.

2 Touch Radio or Media .

3 Touch .

4 Touch the DSP tab to display this screen.

5 Touch the desired items to be set.

6 Touch OK.

AUTOMATIC SOUND LEVELIZER (ASL)

The system adjusts to the optimum volume and tone quality according to vehicle speed to compensate for increased vehicle noise.

1 Touch On of Automatic Sound Levelizer .

2 Touch .

TONE AND BALANCE TONE How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal programs usually sound better with different mixes of treble, mid and bass.

BALANCE A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another.

1 Touch the Sound tab to display this screen.

1. AUDIO SYSTEM OPERATION

172

2 Touch the desired screen button.

Screen button Function

Treble + or -

Touch to adjust high-pitched tones.

Mid + or -

Touch to adjust mid-pitched tones.

Bass + or -

Touch to adjust low-pitched tones.

Front or Rear

Touch to adjust the sound balance between the front and rear speakers.

L or R Touch to adjust the sound balance between the left and right speakers.

3 Touch OK .

INFORMATION The tone of each mode (such as AM, FM

and CD player) can be adjusted.

CD PLAYER

1 When inserting a disc, press the button and gently insert the disc with the label facing up.

NOTICE

Never try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot.

INFORMATION The player is intended for use with 4.7 in.

(12 cm) discs only.

AUX PORT The sound of portable audio players connected to the AUX port can be enjoyed. Contact your Toyota dealer for details.

1 Press the MENU button.

2 Touch Media to display the media control screen and touch the AUX tab to change to AUX mode.

INFORMATION

When the portable audio player is not connected to the AUX port, the tab will be dimmed.

USB PORT A USB memory/iPod can be connected to the USB port. For details, see CONNECTING A USB MEMORY on page 191 and CONNECTING iPod on page 195.

1 Press the MENU button.

2 Touch Media to display the media control screen and touch the USB or iPod tab to change to USB memory/iPod mode.

INFORMATION

When a USB memory/iPod is not connected with the USB port, the tab will be dimmed.

1. AUDIO SYSTEM OPERATION

173

1

2

3

4

5

AU D

IO SYSTEM

LISTENING TO THE RADIO SELECTING A RADIO STATION

1 Press the MENU button.

2 Touch Radio to display the radio control screen.

3 Touch the AM , FM , SAT or Apps tab to select the desired tab.

STEP UP AND DOWN THE STATION BAND

1 Touch Options.

2 Touch and hold TUNE or TUNE to step up or down the station band while the respective button is held down.

INFORMATION The radio automatically changes to

stereo reception when a stereo broadcast is received.

3. RADIO OPERATION

1. AUDIO SYSTEM OPERATION

174

PRESETTING A STATION Radio mode has a mix preset function. AM and FM bands can store up to 36 stations (6 stations per page x 6 pages). SAT band can store up to 18 stations (6 stations per page x 3 pages).

1 Tune in the desired station.

2 Touch one of the left side screen buttons ( 1 - 36 ) and hold it until a beep is heard. This sets the frequency to the screen button. The stations frequency will be displayed in the screen button.

To change the preset station to a different

one, follow the same procedure.

SELECTING A STATION Tune in the desired station using one of the following methods.

Preset tuning: Touch one of the mix preset channels on the left side of the screen to select the desired station. The screen button is highlighted and the station frequency appears on the screen. Seek tuning : Press the or button of SEEK/TRACK . The radio will begin seeking up or down for a station of the nearest frequency and will stop when a station is found. Each time the button is pressed, the stations will be searched automatically one after another. To scan all the frequencies : Touch SCAN . SCAN will appear on the screen. The radio will find the next station and stay there for 10 seconds if All or HD Only is selected, or 5 seconds if Analog is selected, and then scan again. To stay tuned to a station and stop the scanning, touch SCAN again. (To set HD Radio system, see page 224.)

RADIO BROADCAST DATA SYSTEM

This audio system is equipped with Radio Broadcast Data Systems (RBDS). RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters. When RBDS is on, the radio can - only select stations of a particular program type, - display messages from radio stations, - search for a stronger signal station. RBDS features are available only when listening to an FM station that broadcasts RBDS information and the FM info indicator is on.

1. AUDIO SYSTEM OPERATION

175

1

2

3

4

5

AU D

IO SYSTEM

SELECTING A DESIRED TYPE

1 Touch Options .

2 Touch TYPE> to move forward through the program list.

Once a program type has been set, TYPE

SEEK will appear on the screen. The program list is in the following order:

Classical Country EasyLis (Easy Listening) Inform (Information) Jazz News Oldies Other Pop Music Religion Rock R&B (Rhythm and Blues) Sports Talk Traffic (Not available when HD Radio

Settings are set to analog.) Alert (Emergency Alert)

3 Touch and hold TYPE> and the system will start to seek for stations in the relevant program type.

INFORMATION

If no relevant program can be found, no type will appear on the screen.

TRAFFIC ANNOUNCEMENT A station that regularly broadcasts traffic information is automatically located.

Traffic : Touch to seek a traffic program station. TRAF SEEK will appear on the screen.

INFORMATION If no traffic program station is found, No

Traffic will appear on the screen. If a traffic program station is found, the

name of the traffic program station will be displayed for a while.

1. AUDIO SYSTEM OPERATION

176

HD Radio Technology is the digital evolution of analog AM/FM radio. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio with no static or distortion. For more information, and a guide to available radio stations and programming, refer to www.hdradio.com .

USING HD Radio TECHNOLOGY

1 Press the MENU button.

2 Touch Radio to display the radio control screen.

3 Touch the AM or FM tab to select the desired tab.

As a user works through the analog radio

stations, (where applicable) the radio receiver will automatically tune from an analog signal to a digital signal within 5 seconds.

An orange HD) logo indicator will be displayed on the screen when in digital. The HD) logo will first appear in a gray color indicating the station is indeed (an analog and) a digital station. Once the digital signal is acquired, the logo will change to a bright orange color.

The song title, artist name and music genre will appear on the screen when available by the radio station.

4 This screen will be displayed if Options is touched.

When Text is touched, information such

as the artist name, song title, album title and music genre of the track being listened to are displayed on the text screen. To display messages from the station, touch Additional Information .

4. HD Radio TECHNOLOGY INFORMATION

1. AUDIO SYSTEM OPERATION

177

1

2

3

4

5

AU D

IO SYSTEM

When TYPE>or is touched, a program type will be searched. Once a program type has been set, TYPE SEEK will appear on the screen. (See SELECTING A DESIRED TYPE on page 175.)

AVAILABLE HD Radio TECHNOLOGY

MULTICAST On the FM radio frequency most digital stations have multiple or supplemental programs on one FM station.

1 Touch Multicast .

Each time Multicast is touched, the

supplemental program changes. If Multicast is touched when tuned to

the last of the supplemental programs, the main program will be returned to.

TAG

1 Touch Tag to bookmark the music information.

2 Open the cover and connect iPod using an iPod cable.

Turn on the power of the iPod if it is not

turned on. Once an iPod is connected, the music tag

moves from the radio into the iPod. When the iPod is connected to iTunes, the

tagged information of the songs which were tagged while listening to the radio can be viewed. Then a user may decide to purchase the song or CD/Album which had been listened to on their radio.

INFORMATION

If tagging the music information fails, Saving the HD Radio tag failed. will be displayed on the screen. If this occurs, tag the information again.

HD Radio stations can be preset.

1. AUDIO SYSTEM OPERATION

178

TROUBLESHOOTING GUIDE

Experience Cause Action

Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip.

The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode.

None, radio broadcast issue. A user can contact the radio station.

Sound fades, blending in and out.

Radio is shifting between analog and digital audio.

Reception issue, may clear-up as the vehicle continues to be driven. Touching Analog can force radio in an analog audio.

Audio mute condition when an HD2/HD3 multicast channel had been playing.

The radio does not have access to digital signals at the moment.

This is normal behavior, wait until the digital signal returns. If out of the coverage area, seek a new station.

Audio mute delay when selecting an HD2/HD3 multicast channel preset.

The digital multicast content is not available until HD Radio broadcast can be decoded and make the audio available. This takes up to 7 seconds.

This is normal behavior, wait for the audio to become available.

Text information does not match the present song audio.

Data service issue by the radio broadcaster.

Broadcaster should be notified. Complete the form; www.ibiquity.com/automotive/ report_radio_station_experie nces.

No text information shown for the present selected frequency.

Data service issue by the radio broadcaster.

Broadcaster should be notified. Complete the form; www.ibiquity.com/automotive/ report_radio_station_experie nces.

HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD, HD Radio, and Arc logos are proprietary trademarks of iBiquity Digital Corp.

1. AUDIO SYSTEM OPERATION

179

1

2

3

4

5

AU D

IO SYSTEM

HOW TO SUBSCRIBE TO AN XM Satellite Radio

To listen to a satellite radio broadcast in the vehicle, a subscription to the XM Satellite Radio service is necessary. An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and some Canadian provinces.

HOW TO SUBSCRIBE It is necessary to enter into a separate service agreement with XM Satellite Radio in order to receive satellite broadcast programming in the vehicle. Additional activation and service subscription fees apply that are not included in the purchase price of the vehicle and optional digital satellite tuner.

For complete information on

subscription rates and terms, or to subscribe to XM Satellite Radio:

U.S.A. Refer to www.siriusxm.com or call 1-800-967-2346.

Canada Refer to www.xmradio.ca or call 1-877-209-0079.

*: If equipped

INFORMATION

XM Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XM Satellite Radio customer service agreement.

Customers should have their radio ID ready; the radio ID can be found by tuning to CH 000 on the radio. For details, see DISPLAYING THE RADIO ID below.

All fees and programming are the responsibility of XM Satellite Radio and are subject to change.

SATELLITE TUNER TECHNOLOGY NOTICE

Toyotas satellite radio tuners are awarded Type Approval Certificates from XM Satellite Radio Inc. as proof of compatibility with the services offered by XM Satellite Radio.

DISPLAYING THE RADIO ID Each XM tuner is identified with a unique radio ID. The radio ID is required when activating an XM service or when reporting a problem.

If CH 000 is selected using the or button of SEEK/TRACK , the ID code, which is 8 alphanumeric characters, will be displayed. If another channel is selected, the ID code will no longer be displayed. The channel (000) alternates between displaying the radio ID and the specific radio code.

5. RADIO OPERATION (XM Satellite Radio BROADCAST)*

1. AUDIO SYSTEM OPERATION

180

LISTENING TO SATELLITE RADIO

1 Press the MENU button.

2 Touch Radio to display the radio control screen.

3 Touch the SAT tab to choose a satellite broadcast channel.

4 Touch the TUNE> or to select the next or previous channel.

CHANNEL CATEGORY

1 Touch TYPE> to go to the next category.

PRESETTING A CHANNEL

1 Tune in the desired channel.

2 Touch one of the left side screen buttons ( 1 - 18 ) and hold it until a beep is heard. This sets the frequency to the screen button. The channel number will be displayed in the screen button.

To change the preset channel to a different

one, follow the same procedure.

1. AUDIO SYSTEM OPERATION

181

1

2

3

4

5

AU D

IO SYSTEM

SELECTING A CHANNEL Tune in the desired channel using one of the following methods.

Preset tuning : Touch the channel selector screen button ( 1 - 18 ) to listen to the desired channel. The selected screen button ( 1 - 18 ) is highlighted and its related information appears on the right side of the screen. To select a channel within the current category : Press the or button of SEEK/TRACK . The radio will change up or down to a channel within the current channel category.

To scan the currently selected channel category : Touch SCAN . SCAN appears on the screen. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan again. To select a channel, touch SCAN again.