- Manuals
- Brands
- Toyota
- Hatchback
- Corolla Hatchback
- Quick Reference Guide
Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide PDF
Summary of Content for Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide PDF
00505QRG19CORHB
2 0 1 9
QUICK REFERENCE GUIDE
COROLLA HATCHBACK
18-MKG-11873_QRG_Cover_COROLLA_HATCHBACK_1_1F_lm.indd 159 5/17/18 11:39 PM
1 Visit your Toyota dealer for information on customizing this feature. 2 Programmable by customer. Refer to the Owners Manual for instructions and more information.
INDEX
Engine maintenance 8 Fuel tank door release & cap 7 Hood release 8 Indicator symbols 5 Instrument cluster 4 Instrument panel 2-3 Instrument panel light control 8 Keyless entry1,2 6 Smart Key system 7
OVERVIEW
FEATURES & OPERATIONS
Air conditioning/heating 21 Audio 18 Auto lock/unlock1,2 9 Blind Spot Monitor 23 Bottle holders 14 Continuously variable transmission 9 Cup holders 15 Door locks 14 Driving mode select 22 Electric parking brake 10 Lights1 & turn signals 13 Manual transmission 9 Multi-Information Display (MID) 11 Power outlet 19 Rear view monitor system 23 Seat adjustments-Front 16 Seat heaters 20 Seats-Folding rear 16 Seats-Head restraints 16 Steering lock release 15 Steering wheel switches & telephone controls (Bluetooth) 17 Tilt & telescopic steering wheel 15 Vehicle Stability Control (VSC)/ TRAC OFF switch 22
COROLLA HATCHBACK 2019
This Quick Reference Guide is a summary of basic vehicle operations. It contains brief descriptions of fundamental operations so you can locate and use the vehicles main equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for the Owners Manual located in your vehicles glove box. We strongly encourage you to review the Owners Manual and supplementary manuals so you will have a better understanding of your vehicles capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North America, Inc. wish you many years of satisfied driving in your new Corolla Hatchback.
A word about safe vehicle operations This Quick Reference Guide is not a full description of Corolla Hatchback operations. Every Corolla Hatchback owner should review the Owners Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in color throughout the Owners Manual. Each box contains safe operating instructions to help you avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of printing. Toyota reserves the right to make changes at any time without notice.
2019_Corolla_HB_QRG_V5_0516.indd 1 5/17/18 11:23 PM
1
1 Visit your Toyota dealer for information on customizing this feature. 2 Programmable by customer. Refer to the Owners Manual for instructions and more information.
INDEX
Engine maintenance 8 Fuel tank door release & cap 7 Hood release 8 Indicator symbols 5 Instrument cluster 4 Instrument panel 2-3 Instrument panel light control 8 Keyless entry1,2 6 Smart Key system 7
OVERVIEW
FEATURES & OPERATIONS
FEATURES & OPERATIONS (continued)
TOYOTA SAFETY SENSE (TSS)
SAFETY & EMERGENCY FEATURES
Air conditioning/heating 21 Audio 18 Auto lock/unlock1,2 9 Blind Spot Monitor 23 Bottle holders 14 Continuously variable transmission 9 Cup holders 15 Door locks 14 Driving mode select 22 Electric parking brake 10 Lights1 & turn signals 13 Manual transmission 9 Multi-Information Display (MID) 11 Power outlet 19 Rear view monitor system 23 Seat adjustments-Front 16 Seat heaters 20 Seats-Folding rear 16 Seats-Head restraints 16 Steering lock release 15 Steering wheel switches & telephone controls (Bluetooth) 17 Tilt & telescopic steering wheel 15 Vehicle Stability Control (VSC)/ TRAC OFF switch 22
USB charge-port 18 USB medai/AUX port 20 Windows-Power 14 Windshield wipers & washers 12 Wireless charger 19
Floor mat installation 47 Rear door child safety locks 41 Safety Connect 43 Seat belts 41 Seat belts-Shoulder belt anchor 41 Spare tire & tools 44 Star Safety System 46-47 Tire Pressure Monitoring (warning) System (TPMS) 42 Tire repair kit & tools 45
Automatic High Beams (AHB) 39 Dynamic Radar Cruise Control (DRCC) or Full-Speed Range DRCC 36-38 Lane Departure Alert with Steering Assist (LDA w/SA) 28-31 Lane Tracing Assist (LTA) 31-35 Pre-Collision System with Pedestrian Detection (PCS w/PD) 25-27 Road Sign Assist (RSA) 40 Quick overview- Toyota Safety Sense (TSS) 24 Sensors 25
PAIRING BLUETOOTH PHONE FOR THE FIRST TIME 48-50
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
2019_Corolla_HB_QRG_V5_0516.indd 1 5/17/18 11:26 PM
2
OVERVIEW Instrument panel
Steering wheel controls
Windshield wiper and washer switch
Tilt and telescopic steering lock release lever
Audio control switches2
Audio control switches2
Meter control switches
Instrument panel light control dial
ENGINE START STOP swtich
Hood lock release lever
Meters/Multi-Information Display (MID)
Automatic High Beam (AHB) switch
Paddle shift switches1
Telephone switch2
Voice command switch2
Full-SpeedRange Dynamic Radar Cruise Control/Dynamic Radar Cruise ControlVehicle-to-vehicle distance switch
LTA (Lane Tracing Assist)1/Lane Departure Alert with Steering Assist (LDA w/SA)1 switch
Full-Speed Range Dynamic Radar Cruise Control/ Dynamic Radar Cruise Control switch
Parking brake switch
1 If equipped. 2 For details, refer to the Navigation and Multimedia System Owners Manual or visit www.toyota.com/
entune for additional audio/multimedia resources.
Headlights/turn signals/fog lights1 controls
2019_Corolla_HB_QRG_V5_0516.indd 2 5/17/18 11:12 PM
3
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Windshield wiper and washer switch
Emergency flasher switch
VSC OFF switch
SPORT mode switch1
VSC OFF switch
Brake hold switch
iMT (Intelligent Manual Transmission) switch1
With a continuously variable transmission
With a manual transmission
Audio control switches2
ENGINE START STOP swtich
Meters/Multi-Information Display (MID)
Full-SpeedRange Dynamic Radar Cruise Control/Dynamic Radar Cruise ControlVehicle-to-vehicle distance switch
LTA (Lane Tracing Assist)1/Lane Departure Alert with Steering Assist (LDA w/SA)1 switch
Full-Speed Range Dynamic Radar Cruise Control/ Dynamic Radar Cruise Control switch
Parking brake switch
1 If equipped. 2 For details, refer to the Navigation and Multimedia System Owners Manual or visit www.toyota.com/
entune for additional audio/multimedia resources.
Audio system1,2/ Navigation system1,2
Air Conditioning controls
2019_Corolla_HB_QRG_V5_0516.indd 3 5/17/18 11:12 PM
4
OVERVIEW Instrument cluster
For details, refer to Indicators and warning lights, Section 2, 2019 Owners Manual.
Tachometer
Tachometer
Tachometer
Speedometer
Speedometer
Speedometer
Outside temperature
Outside temperature
Outside temperature
Engine coolant temperature gauge Odometer/Trip meter display change button
Odometer/Trip meter display change button
Odometer/Trip meter display change button
Odometer and trip meter display
Odometer and trip meter display
Shift position indicator
Shift position indicator
Shift position indicator
Fuel gauge
Fuel gauge
Fuel gauge
Clock
Clock
Clock
Multi-Information Display (MID)
Multi-Information Display (MID)
Multi-Information Display (MID)
Odometer and trip meter display
Engine coolant temperature gauge
Engine coolant temperature gauge
4.2-inch display
7-inch display (Analog speedometer)
7-inch display (Digital speedometer)
1 If the indicator does not turn off within a few seconds of starting the engine, there may be a malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owners Manual. 3 If the indicator flashes, it indicates that the system is operating. 4 If equipped.Service indicators and reminders
2019_Corolla_HB_QRG_V5_0516.indd 4 5/17/18 11:12 PM
5
Security indicator
Smart Key system indicator
SPORT mode indicator4
Turn signal indicator
Vehicle Stability Control (VSC) OFF indicator1
Rear passengers seat belt reminder
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
For details, refer to Indicators and warning lights, Section 2, 2019 Owners Manual.
Airbag SRS warning1
iMT indicator4
Low fuel level warning
Low engine oil pressure warning
Low outside temperature indicator
Low Tire Pressure Warning1
Malfunction/Check Engine indicator1
Parking brake indicator2
Pre-Collision System (PCS) warning1,2
Slip indicator1,3
Malfunction/Check Engine indicator1
Lane Tracing Assist (LTA)4/ Lane Departure Alert (LDA)4 indicator
High coolant temperature warning
Auto EPB OFF indicator1,4
Automatic High Beam (AHB) indicator1
Blind Spot Monitor (BSM) indicator4
BSM outside rear view mirror indicators1,4
Brake hold operated indicator1,2
Brake hold standby indicator1
Brake system warning1
Brake system warning (yellow indicator)1
Chaging system warning1
ECO driving indicator light1,4
Chaging system warning1
Drivers and front passengers seat belt reminder (alarm will sound if speed is over 12 mph)
Electric power steering system warning1
Front fog light indicator4
Fuel tank door position
Constant speed cruise control indicator/Constant speed cruise control SET indicator Full-Speed Dynamic Radar Cruise Control (DRCC) indicator/ DRCC SET indicator
Headlight low/high beam indicators
Brake Overrride System/Drive-Start Control warning
Odometer and trip meter display
Engine coolant temperature gauge
Engine coolant temperature gauge
1 If the indicator does not turn off within a few seconds of starting the engine, there may be a malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owners Manual. 3 If the indicator flashes, it indicates that the system is operating. 4 If equipped.
Anti-lock Brake System (ABS) warning1
AIR BAG ON/OFF indicator1
Indicator symbols
Service indicators and reminders
2019_Corolla_HB_QRG_V5_0516.indd 5 5/17/18 11:12 PM
6
Keyless entry
Push ONCE: Driver door TWICE: All doors
Push
Push and hold
OVERVIEW
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety.
All-door lock
Touch
Carry Smart Key remote
Carry Smart Key remote
Carry Smart Key remote
Grasp
Front door unlock*
LOCKING OPERATION
PANIC BUTTON
BACK DOOR LOCKING/UNLOCKING
UNLOCKING OPERATION
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. In some models, grasping front passenger door handle will unlock all doors. Please refer to the Owners Manual for more details on how to program the doors. NOTE: Doors may also be locked/unlocked using remote.
Unlock
Lock
NOTE: The Smart Key must be carried to enable the start function. With gear shift lever in Park* or N** and the brake pedal* or clutch pedal** depressed, push the ENGINE START STOP switch.
Without depressing the brake pedal, pressing the ENGINE START STOP switch will change the operation mode in succession from:
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
2019_Corolla_HB_QRG_V5_0516.indd 6 5/17/18 11:12 PM
7
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety.
Front door unlock*
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. In some models, grasping front passenger door handle will unlock all doors. Please refer to the Owners Manual for more details on how to program the doors. NOTE: Doors may also be locked/unlocked using remote.
Smart Key system
NOTE: The Smart Key must be carried to enable the start function. With gear shift lever in Park* or N** and the brake pedal* or clutch pedal** depressed, push the ENGINE START STOP switch.
Without depressing the brake pedal, pressing the ENGINE START STOP switch will change the operation mode in succession from:
Off - All systems OFF. Emergency flashers can be used.
Accessory Some electrical components can be used.
On - All electrical components can be used.
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
Fuel tank door release & cap
NOTE: Tighten until one click is heard. If the cap is not locked or tightened, Check engine indicator may illuminate.
Turn to open
Store
Close
* Continuously variable transmission, ** Manual transmission
2019_Corolla_HB_QRG_V5_0516.indd 7 5/17/18 11:12 PM
8
OVERVIEW
Darker
Brighter
Instrument panel light control
NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the Warranty & Maintenance Guide.
Pull up latch and raise hood
Pull
Hood release
Engine maintenance
Engine oil filler cap Engine oil level dipstick
Engine coolant reservoir
Windshield washer fluid tank
FEATURES & OPERATIONS
Automatic door locks can be programmed to operate in different modes, or turned OFF. Shift position linked door locking/unlocking function -Doors lock when shifting from Park. -Doors unlock when shifting into Park. Speed linked door locking function -Doors lock when the vehicle speed goes above approximately 12 mph (20 km/h). Drivers door linked door unlocking function -Doors unlock when the engine switch is set to OFF and drivers door is opened. Refer to the Owners Manual for more details.
* The ENGINE START STOPswitch must be IGNITION ON and the brake pedal depressed to shift from Park.
Push shift lever to the left from D position, to M position. + : Upshift (push and release) - : Downshift (pull and release) Downshifting increases power going uphill, or provides engine braking downhill. For best fuel economy during normal driving conditions, always drive with the shift lever in the D position.
M 10-SPEED SPORT SEQUENTIAL SHIFTMATIC MODE
2019_Corolla_HB_QRG_V5_0516.indd 8 5/17/18 11:12 PM
9
NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the Warranty & Maintenance Guide.
Hood release
Engine maintenance
FEATURES & OPERATIONS Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned OFF. Shift position linked door locking/unlocking function -Doors lock when shifting from Park. -Doors unlock when shifting into Park. Speed linked door locking function -Doors lock when the vehicle speed goes above approximately 12 mph (20 km/h). Drivers door linked door unlocking function -Doors unlock when the engine switch is set to OFF and drivers door is opened. Refer to the Owners Manual for more details.
* The ENGINE START STOPswitch must be IGNITION ON and the brake pedal depressed to shift from Park.
Push shift lever to the left from D position, to M position. + : Upshift (push and release) - : Downshift (pull and release) Downshifting increases power going uphill, or provides engine braking downhill. For best fuel economy during normal driving conditions, always drive with the shift lever in the D position.
P R N D M
Park* Reverse Neutral Drive M mode
M 10-SPEED SPORT SEQUENTIAL SHIFTMATIC MODE
Continuously variable transmission (if equipped)
+ (M mode)
- (M mode)
- (M mode)
+ (M mode)
Lift up ring to shift into reverse
Manual transmission (if equipped)
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
2019_Corolla_HB_QRG_V5_0516.indd 9 5/17/18 11:12 PM
10
FEATURES & OPERATIONS Electric parking brake
Driver side
Driver side
Automatic mode ON
Automatic mode OFF
Manual mode (Brake HOLD switch)
Automatic (shift lever operation) To turn automatic mode ON, while vehicle is stopped, pull and hold switch until EPB Shift Interlock Function Activated* displays in Multi-Information Display (MID) or auto EPB OFF indicator** turns off. While depressing brake, shifting into P position will automatically set the brake and turn the parking brake indicator and parking brake light on. To release brake, depress brake and shift out of P. The indicator light and the light on the switch turn off. To turn automatic mode OFF, push and hold parking brake switch until EPB Shift Interlock Function Deactivated* displays on the MID or auto EPB OFF indicator** turns on. Manual While vehicle is stopped and brake pedal is depressed, pull to set parking brake and turn the parking brake indicator and parking brake light on. To release, press the brake pedal and push switch. The indicator light turns off. Brake hold The brake hold system keeps the brake applied when the shift lever is in D, M*/a forward driving position** or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the brake when the accelerator pedal is depressed with the shift lever in D or M*/a forward driving position** to allow smooth start off. Refer to the Owners Manual for limitations and more details.
Standby indicator Operated indicator
Parking brake light
Continuously variable transmission
Continuously variable transmission
Manual transmission
Manual transmission
* Continuously variable transmission ** Manual transmission
Push or and on steering wheel to change and select information in the following:
4.2-inch display
Meter control switches
2019_Corolla_HB_QRG_V5_0516.indd 10 5/17/18 11:12 PM
11
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Electric parking brake Manual mode (Brake HOLD switch)
Automatic (shift lever operation) To turn automatic mode ON, while vehicle is stopped, pull and hold switch until EPB Shift Interlock Function Activated* displays in Multi-Information Display (MID) or auto EPB OFF indicator** turns off. While depressing brake, shifting into P position will automatically set the brake and turn the parking brake indicator and parking brake light on. To release brake, depress brake and shift out of P. The indicator light and the light on the switch turn off. To turn automatic mode OFF, push and hold parking brake switch until EPB Shift Interlock Function Deactivated* displays on the MID or auto EPB OFF indicator** turns on. Manual While vehicle is stopped and brake pedal is depressed, pull to set parking brake and turn the parking brake indicator and parking brake light on. To release, press the brake pedal and push switch. The indicator light turns off. Brake hold The brake hold system keeps the brake applied when the shift lever is in D, M*/a forward driving position** or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the brake when the accelerator pedal is depressed with the shift lever in D or M*/a forward driving position** to allow smooth start off. Refer to the Owners Manual for limitations and more details.
Driving assist system status display area Driving assist system status display area
Content display areaContent display area
Parking brake light
* Continuously variable transmission ** Manual transmission
Push or and on steering wheel to change and select information in the following:
Multi-Information Display (MID)
4.2-inch display
Meter control switches
7-inch display
Previous screen
Enter/Select
Scroll/search screens
Driving support system information
Driving information
Vehicle information
Audio system-linked display
Settings display
Warning display
2019_Corolla_HB_QRG_V5_0516.indd 11 5/17/18 11:12 PM
12
FEATURES & OPERATIONS
Parking lights
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNAL
REAR
FRONT
-Daytime Running Light system (DRL) Automatically turns on the headlights at a reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second delay, or lock switch on remote may be pushed after locking.
-Automatic High Beam (AHB) system Automatically switches between high and low beams as appropriate to provide the most light possible and enhance forward visibility. Refer to Toyota Safety Sense (TSS) in this guide or the Owners Manual for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owners Manual for details.
Windshield wipers & washer
Interval wipe
Slow
Fast
Pull to wash and wipe
Push lever to wash and wipe
Mist
On
Interval wipe
Adjust frequency*
Pull to wash and wipe
* Intermittent windshield wiper frequency adjustment Rotate to increase/ decrease wipe frequency.
Refer to the Owners Manual for more information.
1 The right hand signals will flash three times. 2 The left hand signals will flash three times.
Front fog lights come on only when the headlights are on low beam.
2019_Corolla_HB_QRG_V5_0516.indd 12 5/17/18 11:12 PM
13
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Lights & turn signals
Headlights
AUTO
OFF
Parking lights
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNAL
Turn
Low beam (Original position)
or
-Daytime Running Light system (DRL) Automatically turns on the headlights at a reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second delay, or lock switch on remote may be pushed after locking.
-Automatic High Beam (AHB) system Automatically switches between high and low beams as appropriate to provide the most light possible and enhance forward visibility. Refer to Toyota Safety Sense (TSS) in this guide or the Owners Manual for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owners Manual for details.
High beam (Push)
High beam flasher (Pull)
Auto High Beam*
* Intermittent windshield wiper frequency adjustment Rotate to increase/ decrease wipe frequency.
Refer to the Owners Manual for more information.
Right turn
Lane change1
Lane change2
Left turn
1 The right hand signals will flash three times. 2 The left hand signals will flash three times.
Front fog lights come on only when the headlights are on low beam.
2019_Corolla_HB_QRG_V5_0516.indd 13 5/17/18 11:12 PM
14
Windows-Power
All Window Auto Up/Down Push the switch completely down or pull it completely up and release to fully open or close. To stop the window partway, operate the switch in the opposite direction. Window lock switch Deactivates all passenger windows. Drivers window remains operable.
Up
Down
Indicator
Driver side Window lock switch
Hold wheel, push lever down, set angle and return lever. NOTE: Do not attempt to adjust while the vehicle is in motion.
FRONT REAR
The green indicator light on the engine switch will flash and a message will be shown on the multi-information display. Press the engine switch while turning the steering wheel left and right.
FRONT
FEATURES & OPERATIONS
Unlock Lock
Door locks
Bottle holders
2019_Corolla_HB_QRG_V5_0516.indd 14 5/17/18 11:12 PM
15
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
All Window Auto Up/Down Push the switch completely down or pull it completely up and release to fully open or close. To stop the window partway, operate the switch in the opposite direction. Window lock switch Deactivates all passenger windows. Drivers window remains operable.
Tilt & telescopic steering wheel
Hold wheel, push lever down, set angle and return lever. NOTE: Do not attempt to adjust while the vehicle is in motion.
Lock release lever
REAR
Steering lock release
The green indicator light on the engine switch will flash and a message will be shown on the multi-information display. Press the engine switch while turning the steering wheel left and right.
Turn
FRONT REAR
Cup holders
Angle
Length
Door locks
2019_Corolla_HB_QRG_V5_0516.indd 15 5/17/18 11:12 PM
16
FEATURES & OPERATIONS
Front seats Rear outside seats Rear center seat
Lock release button Lock release button Lock release button
Seat adjustments-Front
Seats-Head restraints
Seats-Folding rear
Fold down
Pull
Each seatback may be folded separately.
MANUAL SEAT POWER SEAT (DRIVERS SIDE ONLY)
Seat position (forward/backward)
Height crank (drivers side only) Height crank
Seatback angle Seatback angle
Seat position (forward/backward)
Lumbar support (drivers side only/ if equipped)
Lumbar supportSeat cushion (front) angle
Steering wheel telephone switches
Microphone
Bluetooth technology allows dialing or receipt of calls without removing your hands from the steering wheel or using a cable to connect the compatible telephone and the system. * Push and hold to access Mobile Assistant. When a compatible smartphone is Bluetooth connected push and hold the off hook switch 2-3 seconds to access Siri Eyes Free. Refer to the Bluetooth Device Pairing Section in this guide for more information about phone connections and compatibility. Refer to the Owners Manual and the Navigation System Owners Manual for more details. NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Entune system if it will distract you.
Volume control
2019_Corolla_HB_QRG_V5_0516.indd 16 5/17/18 11:12 PM
17
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Each seatback may be folded separately.
POWER SEAT (DRIVERS SIDE ONLY)
Seatback angle
Lumbar support
Steering wheel telephone switches
Microphone
Bluetooth technology allows dialing or receipt of calls without removing your hands from the steering wheel or using a cable to connect the compatible telephone and the system. * Push and hold to access Mobile Assistant. When a compatible smartphone is Bluetooth connected push and hold the off hook switch 2-3 seconds to access Siri Eyes Free. Refer to the Bluetooth Device Pairing Section in this guide for more information about phone connections and compatibility. Refer to the Owners Manual and the Navigation System Owners Manual for more details.
Back switch
NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Entune system if it will distract you.
Volume control
Voice command switch
Start and end call/ Mobile Assistant access*
MODE Push to change an audio mode. Push and hold to turn the audio mutes or pauses.
Use to search within the selected audio medium (radio, CD, etc.).
Steering wheel switches & telephone controls (Bluetooth)
Microphone
2019_Corolla_HB_QRG_V5_0516.indd 17 5/17/18 11:12 PM
18
Audio FEATURES & OPERATIONS
ENTUNE 3.0 AUDIO PLUS
ENTUNE 3.0 AUDIO
ENTUNE 3.0 PREMIUM AUDIO, WITH APP SUITE AND DYNAMIC NAVIGATION
NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Entune system if it will distract you. Visually match your vehicles EntuneTM 3.0 audio system to one featured in this guide for the most accurate information.
Refer to the Navigation System Owners Manual or visit www.toyota.com/entune for additional audio/multimedia resources.
Touch screen display
Access AUDIO screen
Push to turn ON/OFF or turn to adjust volume
Turn to tune radio stations manually or select tracks or files
Access Bluetooth hands-free system
Seek station/CD track select
Access HOME screen Access MENU screen
Access APPS screen
Access MAP screen
A mobile device can be charged wirelessly on the tray. (1) Press the wireless charger power switch and the green operation indicator light turns on. (2) Place a mobile device on the tray as shown in the illustration. An amber indicator illuminates while charging is in progress. When charging is complete, the indicator illuminates green. Some phones, cases or cover type wireless chargers may not cause the green indicator to illuminate even though it is fully charged.
Refer to the Owners Manual for more details on this system before attempting to use it.
Operation indicator light
USB charge-port
(Charge-only)
The ENGINE START STOP switch must be in the ACCESSORY or IGNITION ON mode for use.
2019_Corolla_HB_QRG_V5_0516.indd 18 5/17/18 11:12 PM
19
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Audio
ENTUNE 3.0 AUDIO PLUS
ENTUNE 3.0 AUDIO
ENTUNE 3.0 PREMIUM AUDIO, WITH APP SUITE AND DYNAMIC NAVIGATION
NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Entune system if it will distract you. Visually match your vehicles EntuneTM 3.0 audio system to one featured in this guide for the most accurate information.
Refer to the Navigation System Owners Manual or visit www.toyota.com/entune for additional audio/multimedia resources.
Turn to tune radio stations manually or select tracks or files
Access Bluetooth hands-free system
Seek station/CD track select
Access APPS screen
Wireless charger (if equipped)
A mobile device can be charged wirelessly on the tray. (1) Press the wireless charger power switch and the green operation indicator light turns on. (2) Place a mobile device on the tray as shown in the illustration. An amber indicator illuminates while charging is in progress. When charging is complete, the indicator illuminates green. Some phones, cases or cover type wireless chargers may not cause the green indicator to illuminate even though it is fully charged.
Refer to the Owners Manual for more details on this system before attempting to use it.
Power switch
Charge area
Operation indicator light
Press
When the engine is turned off, the last state (ON/ OFF) of the charger is memorized.
Place device nearest the center of charging area for best results. Moving device may result in stopping or restarting the charging process.
Place
(1)
(2)
USB charge-port Power outlet
The ENGINE START STOP switch must be in the ACCESSORY or IGNITION ON mode for use.
2019_Corolla_HB_QRG_V5_0516.indd 19 5/17/18 11:12 PM
20
FEATURES & OPERATIONS USB media/AUX port
USB media port By connecting a USB-compatible portable audio device or USB memory stick into the USB media port, you can listen to music through the vehicles speaker system. AUX port By inserting an AUX cable into the AUX port, you can listen to music from a portable audio device through the vehicles speaker system while in AUX mode.
WITHOUT DUAL AIR CONDITIONING SYSTEM
WITH DUAL AIR CONDITIONING SYSTEM
Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
Seat heaters (if equipped)
The engine switch must be in the IGNITION ON mode.
AUX port
2019_Corolla_HB_QRG_V5_0516.indd 20 5/17/18 11:12 PM
21
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Air conditioning/heating
USB media port By connecting a USB-compatible portable audio device or USB memory stick into the USB media port, you can listen to music through the vehicles speaker system. AUX port By inserting an AUX cable into the AUX port, you can listen to music from a portable audio device through the vehicles speaker system while in AUX mode.
WITHOUT DUAL AIR CONDITIONING SYSTEM
WITH DUAL AIR CONDITIONING SYSTEM
Temperature control
Temperature control (driver side)
Temperature control (passenger side)
Fan speed increases/decreases
Fan speed
Windshield airflow/defogger
Windshield airflow/defogger
Air Conditioning ON/OFF
Air Conditioning ON/OFF
Climate control OFF
Climate control OFF
Eco air conditioning mode
Eco air conditioning mode
Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
Airflow vent mode
Airflow vent mode
Outside rearview mirror/Rear defogger
Outside rearview mirror/Rear defogger
Recirculate cabin air (outside air when OFF)
Recirculate cabin air (outside air when OFF)
Outside air
Outside air
Seat heaters (if equipped)
The engine switch must be in the IGNITION ON mode.
SYNC button Indicator ON: Synchronized temperature settings for drivers and front passengers seat. Indicator OFF: Separate temperature settings for drivers and front passengers seat.
2019_Corolla_HB_QRG_V5_0516.indd 21 5/17/18 11:12 PM
22
FEATURES & OPERATIONS
Driving mode select
The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The camera for the rear view monitor system is located above the license plate.
To adjust the image on the rear view monitor screen, press the MENU button and select Display on the screen. Select Camera to adjust the screen contrast and brightness. Refer to the Owners Manual and the Navigation Owners Manual for limitations and more details on this system.
The system is designed to use radar sensors to detect vehicles traveling in the Corolla Hatchbacks blind spot and advises the driver of the vehicles presence via the outside rear view mirror indicators. Refer to the Owners Manual for limitations and more details on this system before attempting to use it.
Outside rear view mirror indicators
iMT (INTELLIGENT MANUAL TRANSMISSION, WITH A MAUAL TRANSMISSION)
SPORT MODE (WITH A CONTINUOUSLY VARIABLE TRAMSMISSION)
Refer to the Owners Manual for more information.
Vehicle Stability Contorl (VSC)/ TRAC OFF switch
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like mud, dirt or snow. While car is stopped, press switch to disable the TRAC system. To disable both VSC and TRAC systems, press and hold the switch for at least 3 seconds. Refer to the Owners Manual for more details.
2019_Corolla_HB_QRG_V5_0516.indd 22 5/17/18 11:12 PM
23
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Driving mode select
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The camera for the rear view monitor system is located above the license plate.
To adjust the image on the rear view monitor screen, press the MENU button and select Display on the screen. Select Camera to adjust the screen contrast and brightness. Refer to the Owners Manual and the Navigation Owners Manual for limitations and more details on this system.
The system is designed to use radar sensors to detect vehicles traveling in the Corolla Hatchbacks blind spot and advises the driver of the vehicles presence via the outside rear view mirror indicators. Refer to the Owners Manual for limitations and more details on this system before attempting to use it.
Indicators
Outside rear view mirror indicators Meter control switches
Outside rear view mirror indicators
Blind Spot Monitor (if equipped)
Refer to the Owners Manual for more information.
Vehicle Stability Contorl (VSC)/ TRAC OFF switch
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like mud, dirt or snow. While car is stopped, press switch to disable the TRAC system. To disable both VSC and TRAC systems, press and hold the switch for at least 3 seconds. Refer to the Owners Manual for more details.
2019_Corolla_HB_QRG_V5_0516.indd 23 5/17/18 11:12 PM
24
TOYOTA SAFETY SENSE
Toyota Safety Sense (TSS) is a set of active safety technologies designed to help mitigate or prevent collisions across a wide range of traffic situations, in certain conditions. TSS is designed to help support the drivers awareness, decision making and vehicle operation contributing to a safe driving experience. Refer to the Owners Manual for operation, setting adjustments, limitations and more details to understand these functions and complete safety precautions. For more information, please go to http://www.toyota.com/safety-sense
TSS-P combines an in-vehicle camera mounted in front of the inside rear view mirror and a radar mounted in the front grill. These sensors support the driver assist systems.
The Pre-Collision System uses a radar sensor and camera sensor to help detect a vehicle or pedestrian or bicyclist in front of your vehicle. As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not use PCS instead of normal braking operations under any circumstances. Do not attempt to test the operation of the Pre-Collision System yourself, as the system may not operate or engage, possibly leading to an accident. In some situations, such as when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a curve and for a few seconds after driving on a curve, a vehicle may not be detected by the radar and camera sensors, preventing the system from operating or engaging properly. Refer to a Toyota Owners Manual for a list of additional situations in which the system may not operate properly.
Pre-Collision Warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the Multi-Information Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist If the driver notices the hazard and brakes, the system may provide additional braking force using Brake Assist. This system may prime the brakes and may apply greater braking force in relation to how strongly the brake pedal is depressed.
Quick overview-Toyota Safety Sense 2.0
Lane Departure Alert with Steering Assist (LDA w/SA)* LDA w/SA is designed to provide notification when the system detects an unintended lane departure. The Steering Assist function is designed to provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. The Sway Warning function is designed to detect vehicle swaying (based on the vehicle location and steering wheel operation) and alert the driver with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB) AHB is designed to detect the headlights of oncoming vehicles and the tail lights of preceding vehicles and switch between high beams and low beams as appropriate.
Road Sign Assist (RSA) RSA is designed to recognizes specific road signs using the forward facing camera to provide information to the driver via the display.
Pre-Collision System with Pedestrian Detection (PCS w/PD) PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system detects a potential collision with a preceding vehicle is likely to occur. Advanced millimeter-wave radar sensor system is designed to work with the camera sensor to help recognize a preceding pedestrian or bicyclist, and provide an alert, mitigation and/or avoidance support in certain conditions.
Dynamic Radar Cruise Control (DRCC)* or Full-Speed Range Dynamic Radar Cruise Control (DRCC)** DRCC is designed to help maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. Full-Speed Range DRCC is the same as regular DRCC except the available speed range is extended down to 0 MPH.
Lane Tracing Assist (LTA)** LTA contains all the features of LDA described above and additionally is designed to help keep the vehicle in the center of a lane by assisting the driver in steering control when using Full-Speed Range DRCC**.
* Manual transmission, ** Continuously variable transmission
2019_Corolla_HB_QRG_V5_0516.indd 24 5/17/18 11:12 PM
25
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Radar sensor
Camera sensor
Sensors
Toyota Safety Sense (TSS) is a set of active safety technologies designed to help mitigate or prevent collisions across a wide range of traffic situations, in certain conditions. TSS is designed to help support the drivers awareness, decision making and vehicle operation contributing to a safe driving experience. Refer to the Owners Manual for operation, setting adjustments, limitations and more details to understand these functions and complete safety precautions. For more information, please go to http://www.toyota.com/safety-sense
TSS-P combines an in-vehicle camera mounted in front of the inside rear view mirror and a radar mounted in the front grill. These sensors support the driver assist systems.
The Pre-Collision System uses a radar sensor and camera sensor to help detect a vehicle or pedestrian or bicyclist in front of your vehicle. As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not use PCS instead of normal braking operations under any circumstances. Do not attempt to test the operation of the Pre-Collision System yourself, as the system may not operate or engage, possibly leading to an accident. In some situations, such as when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a curve and for a few seconds after driving on a curve, a vehicle may not be detected by the radar and camera sensors, preventing the system from operating or engaging properly. Refer to a Toyota Owners Manual for a list of additional situations in which the system may not operate properly.
Pre-Collision Warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the Multi-Information Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist If the driver notices the hazard and brakes, the system may provide additional braking force using Brake Assist. This system may prime the brakes and may apply greater braking force in relation to how strongly the brake pedal is depressed.
Quick overview-Toyota Safety Sense 2.0
Lane Departure Alert with Steering Assist (LDA w/SA)* LDA w/SA is designed to provide notification when the system detects an unintended lane departure. The Steering Assist function is designed to provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. The Sway Warning function is designed to detect vehicle swaying (based on the vehicle location and steering wheel operation) and alert the driver with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB) AHB is designed to detect the headlights of oncoming vehicles and the tail lights of preceding vehicles and switch between high beams and low beams as appropriate.
Road Sign Assist (RSA) RSA is designed to recognizes specific road signs using the forward facing camera to provide information to the driver via the display.
Pre-Collision System with Pedestrian Detection (PCS w/PD) PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system detects a potential collision with a preceding vehicle is likely to occur. Advanced millimeter-wave radar sensor system is designed to work with the camera sensor to help recognize a preceding pedestrian or bicyclist, and provide an alert, mitigation and/or avoidance support in certain conditions.
Dynamic Radar Cruise Control (DRCC)* or Full-Speed Range Dynamic Radar Cruise Control (DRCC)** DRCC is designed to help maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. Full-Speed Range DRCC is the same as regular DRCC except the available speed range is extended down to 0 MPH.
Lane Tracing Assist (LTA)** LTA contains all the features of LDA described above and additionally is designed to help keep the vehicle in the center of a lane by assisting the driver in steering control when using Full-Speed Range DRCC**.
Pre-Collision System with Pedestrian Detection (PCS w/PD)
* Manual transmission, ** Continuously variable transmission
2019_Corolla_HB_QRG_V5_0516.indd 25 5/17/18 11:12 PM
26
CHANGING PRE-COLLISION ALERT TIMINGPRE-COLLISION SYSTEM (CONTINUED)
DISABLING PRE-COLLISION SYSTEM (PCS)
Each time the PCS switch is pressed, the response to the PCS alert timing changes.
TOYOTA SAFETY SENSE
Refer to the Toyota Owners Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it.
Pre-Collision Braking If the driver does not brake in a set time and the system determines that the possibility of a frontal collision with a preceding vehicle is extremely high, the system may automatically apply the brakes, reducing speed in order to help the driver reduce the impact and in certain cases avoid the collision.
Monocular camera sensor
Millimeter wave radar
As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS package may also help to detect a pedestrian or bicyclist in front of your vehicle. With Toyota Safety Sense, PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to help detect a pedestrian or bicyclist in front of your vehicle in certain conditions. The in-vehicle camera of PCS detects a potential pedestrian or bicyclist based on size, profile, and motion of the detected pedestrian or bicyclist. However, a pedestrian or bicyclist may not be detected depending on the conditions, including the surrounding brightness and the motion, posture, size, and angle of the potential detected pedestrian or bicyclist, preventing the system from operating or engaging. Refer to a Toyota Owners Manual for additional information.
PCS PEDESTRIAN DETECTION
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select from the MID and then press . The setting screen is displayed. (3) Press each time to change the setting. Each time it is pressed, the response to the PCS alert timing changes as shown above. You can press to go back to the menu. Note: PCS is enabled each time the engine switch is turned to Ignition On. The system can be disabled/enabled and the alert timing of the system can be changed. (Alert timing only, brake operation remains the same).
(1) Press switches and select from the Multi-Information Display (MID). (2) Press and switches to change the setting. (3) Press to go back to the menu. Note: The system is enabled each time the power switch is turned to ON mode. Refer to a Toyota Owners Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it.
2019_Corolla_HB_QRG_V5_0516.indd 26 5/17/18 11:12 PM
27
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
CHANGING PRE-COLLISION ALERT TIMING
DISABLING PRE-COLLISION SYSTEM (PCS)
Each time the PCS switch is pressed, the response to the PCS alert timing changes.
Far Middle
(default) Near
Refer to the Toyota Owners Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it.
Pre-Collision Braking If the driver does not brake in a set time and the system determines that the possibility of a frontal collision with a preceding vehicle is extremely high, the system may automatically apply the brakes, reducing speed in order to help the driver reduce the impact and in certain cases avoid the collision.
As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS package may also help to detect a pedestrian or bicyclist in front of your vehicle. With Toyota Safety Sense, PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to help detect a pedestrian or bicyclist in front of your vehicle in certain conditions. The in-vehicle camera of PCS detects a potential pedestrian or bicyclist based on size, profile, and motion of the detected pedestrian or bicyclist. However, a pedestrian or bicyclist may not be detected depending on the conditions, including the surrounding brightness and the motion, posture, size, and angle of the potential detected pedestrian or bicyclist, preventing the system from operating or engaging. Refer to a Toyota Owners Manual for additional information.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select from the MID and then press . The setting screen is displayed. (3) Press each time to change the setting. Each time it is pressed, the response to the PCS alert timing changes as shown above. You can press to go back to the menu. Note: PCS is enabled each time the engine switch is turned to Ignition On. The system can be disabled/enabled and the alert timing of the system can be changed. (Alert timing only, brake operation remains the same).
(1) Press switches and select from the Multi-Information Display (MID). (2) Press and switches to change the setting. (3) Press to go back to the menu. Note: The system is enabled each time the power switch is turned to ON mode. Refer to a Toyota Owners Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it.
2019_Corolla_HB_QRG_V5_0516.indd 27 5/17/18 11:12 PM
28
TOYOTA SAFETY SENSE
LDA in TSS uses an in-vehicle camera designed to detect visible white and yellow lane markers or road edge in front of the vehicle and the vehicles position on the road. If the system determines that the vehicle is starting to unintentionally deviate from its lane, the system alerts the driver with an audio and visual alert. When the alerts occur, the driver must check the surrounding road situation and carefully operate the steering wheel to move the vehicle back to the center part of their lane. LDA is designed to function at speeds of approximately 32 mph (50 km/h) or higher on relatively straight roadways. In addition to the alert function, LDA w/SA also features a steering assist function. When enabled, if the system determines that the vehicle is on a path to unintentionally depart from its lane, the system may provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due to inattention, or the driver abruptly operates the steering wheel after an inattentive period, when enabled, the vehicle sway warning function alerts the driver with an audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist (LDA w/SA)*
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off. Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
LANE DEPARTURE ALERT
LDA function display
(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function displays when the Multi-Information Display (MID) is switched to the driving assist system information screen. (1) The system displays solid white lines on the LDA indicator when visible lane markers on the road are detected. A side flashes orange to alert the driver when the vehicle deviates from its lane. (2) The system displays outlines on the LDA indicator when lane markers on the road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. For example, LDA may not function on the side(s) where white/yellow lines are not detectable. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
* Manual transmission
2019_Corolla_HB_QRG_V5_0516.indd 28 5/17/18 11:12 PM
29
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
LDA in TSS uses an in-vehicle camera designed to detect visible white and yellow lane markers or road edge in front of the vehicle and the vehicles position on the road. If the system determines that the vehicle is starting to unintentionally deviate from its lane, the system alerts the driver with an audio and visual alert. When the alerts occur, the driver must check the surrounding road situation and carefully operate the steering wheel to move the vehicle back to the center part of their lane. LDA is designed to function at speeds of approximately 32 mph (50 km/h) or higher on relatively straight roadways. In addition to the alert function, LDA w/SA also features a steering assist function. When enabled, if the system determines that the vehicle is on a path to unintentionally depart from its lane, the system may provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due to inattention, or the driver abruptly operates the steering wheel after an inattentive period, when enabled, the vehicle sway warning function alerts the driver with an audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist (LDA w/SA)*
Press the LDA switch to turn the LDA system on. Depress again to turn it off. Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
LANE DEPARTURE ALERT
LDA function display
Operation display of steering wheel operation support
LDA indicator
Lane marker
(2)(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function displays when the Multi-Information Display (MID) is switched to the driving assist system information screen. (1) The system displays solid white lines on the LDA indicator when visible lane markers on the road are detected. A side flashes orange to alert the driver when the vehicle deviates from its lane. (2) The system displays outlines on the LDA indicator when lane markers on the road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. For example, LDA may not function on the side(s) where white/yellow lines are not detectable. Refer to a Toyota Owners Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
* Manual transmission
2019_Corolla_HB_QRG_V5_0516.indd 29 5/17/18 11:12 PM
30
ADJUSTING LDA ALERT SENSITIVITY
DISABLING STEERING ASSIST
The driver can adjust the sensitivity of the LDA (warning) function from the Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the lane marker. Normal - Is designed to warn approximately when the front tire crosses the lane marker.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
TOYOTA SAFETY SENSE
SWAY WARNING SYSTEM
SWS is a function of LDA and is designed to detect swaying based on the vehicle location in the lane and the drivers steering wheel operation. To help prevent swaying, the system alerts the driver using a buzzer sound and a warning displays in the MID.
Continuous lane deviations from swaying.
Gentle swaying from drivers inattentiveness.
Acute steering wheel operation after the number of operations decrease due to drivers inattentiveness.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING ALERT
The LTA system is comprised of the lane departure alert function, the steering assist function, the lane centering function, and the vehicle sway warning function. The in-vehicle camera detects the visible white and yellow lane markers in front the vehicle and the vehicles position on the road. If the vehicle starts to unintentionally deviate from its lane when the LTA system is on, the lane departure alert function alerts the driver with an audio and visual alert. When the steering assist function is enabled, if the system determines that the vehicle is on a path to unintentionally depart from its lane, the system may provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. Additionally, when enabled, the lane centering function will automatically provide assistance to help keep the vehicle in the center of the lane when Full-Speed DRCC is set. If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due to inattention, or the driver abruptly operates the steering wheel after an inattentive period, when enabled, the vehicle sway warning function alerts the driver with an audio and visual alert, urging them to take a break.
2019_Corolla_HB_QRG_V5_0516.indd 30 5/17/18 11:12 PM
31
The driver can adjust the sensitivity of the LDA (warning) function from the Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the lane marker. Normal - Is designed to warn approximately when the front tire crosses the lane marker.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
SWS is a function of LDA and is designed to detect swaying based on the vehicle location in the lane and the drivers steering wheel operation. To help prevent swaying, the system alerts the driver using a buzzer sound and a warning displays in the MID.
Acute steering wheel operation after the number of operations decrease due to drivers inattentiveness.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING ALERT
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
The LTA system is comprised of the lane departure alert function, the steering assist function, the lane centering function, and the vehicle sway warning function. The in-vehicle camera detects the visible white and yellow lane markers in front the vehicle and the vehicles position on the road. If the vehicle starts to unintentionally deviate from its lane when the LTA system is on, the lane departure alert function alerts the driver with an audio and visual alert. When the steering assist function is enabled, if the system determines that the vehicle is on a path to unintentionally depart from its lane, the system may provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane. Additionally, when enabled, the lane centering function will automatically provide assistance to help keep the vehicle in the center of the lane when Full-Speed DRCC is set. If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due to inattention, or the driver abruptly operates the steering wheel after an inattentive period, when enabled, the vehicle sway warning function alerts the driver with an audio and visual alert, urging them to take a break.
Lane Tracing Assist (LTA)*
* Continuously variable transmission
2019_Corolla_HB_QRG_V5_0516.indd 31 5/17/18 11:12 PM
32
TOYOTA SAFETY SENSE
TURNING THE LTA SYSTEM ON/OFF
Press the LTA switch to turn the LTA system on. Depress again to turn it off. Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset. Refer to a Toyota Owners Manual for additional information on LTA operation, settings adjustments, limitations, and precautions before attempting to use it.
LANE TRACING ASSIST
LANE TRACING ASSIST (CONTINUED)
LTA function display
Operation display of steering wheel operation support
Follow-up cruising display
LTA indicator
Lane marker
(2)(1)
Lane Tracing Assist (LTA) indicator flashes orange when operating.
The LTA function displays when the Multi-Information Display (MID) is switched to the driving assist system information screen. (1) The system displays solid white lines on the LTA indicator when visible lane markers on the road are detected. A side flashes orange to alert the driver when the vehicle deviates from its lane. (2) The system displays outlines on the LTA indicator when lane markers on the road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. For example, LTA may not function on the side(s) where white/yellow lines are not detectable. Refer to a Toyota Owners Manual for additional information on LTA operation, settings adjustments, limitations, and precautions before attempting to use it.
ADJUSTING LTA ALERT SENSITIVITY
DISABLING STEERING ASSIST
The driver can adjust the sensitivity of the LTA (warning) function from the Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the lane marker. Normal - Is designed to warn approximately when the front tire crosses the lane marker.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
2019_Corolla_HB_QRG_V5_0516.indd 32 5/17/18 11:12 PM
33
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Press the LTA switch to turn the LTA system on. Depress again to turn it off. Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset. Refer to a Toyota Owners Manual for additional information on LTA operation, settings adjustments, limitations, and precautions before attempting to use it.
LANE TRACING ASSIST (CONTINUED)
Lane Tracing Assist (LTA) indicator flashes orange when operating.
The LTA function displays when the Multi-Information Display (MID) is switched to the driving assist system information screen. (1) The system displays solid white lines on the LTA indicator when visible lane markers on the road are detected. A side flashes orange to alert the driver when the vehicle deviates from its lane. (2) The system displays outlines on the LTA indicator when lane markers on the road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. For example, LTA may not function on the side(s) where white/yellow lines are not detectable. Refer to a Toyota Owners Manual for additional information on LTA operation, settings adjustments, limitations, and precautions before attempting to use it.
ADJUSTING LTA ALERT SENSITIVITY
DISABLING STEERING ASSIST
The driver can adjust the sensitivity of the LTA (warning) function from the Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the lane marker. Normal - Is designed to warn approximately when the front tire crosses the lane marker.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
2019_Corolla_HB_QRG_V5_0516.indd 33 5/17/18 11:12 PM
34
TOYOTA SAFETY SENSE
SWAY WARNING SYSTEM
SWS is a function of LTA and is designed to detect swaying based on the vehicle location in the lane and the drivers steering wheel operation. To help prevent swaying, the system alerts the driver using a buzzer sound and a warning displays in the MID.
Continuous lane deviations from swaying.
Gentle swaying from drivers inattentiveness.
Acute steering wheel operation after the number of operations decrease due to drivers inattentiveness.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the Lane center setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LTA SWAY WARNING ALERT DISABLING LANE CENTERING FUNCTION
LANE CENTERING
The lane centering function is linked with Full-Speed Range Dynamic Radar Cruise Control (DRCC) and provides the required assistance by operating the steering wheel to keep the vehicle in its current ane.
When dynamic radar cruise control with full-speed range is not operating, the lane centering function does not operate.
2019_Corolla_HB_QRG_V5_0516.indd 34 5/17/18 11:12 PM
35
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
SWS is a function of LTA and is designed to detect swaying based on the vehicle location in the lane and the drivers steering wheel operation. To help prevent swaying, the system alerts the driver using a buzzer sound and a warning displays in the MID.
Acute steering wheel operation after the number of operations decrease due to drivers inattentiveness.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the Lane center setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the same condition regardless of Ignition cycle until changed by the driver or the system is reset.
DISABLING LANE CENTERING FUNCTION
LANE CENTERING
The lane centering function is linked with Full-Speed Range Dynamic Radar Cruise Control (DRCC) and provides the required assistance by operating the steering wheel to keep the vehicle in its current ane.
When dynamic radar cruise control with full-speed range is not operating, the lane centering function does not operate.
2019_Corolla_HB_QRG_V5_0516.indd 35 5/17/18 11:12 PM
36
TURNING SYSTEM ON/OFF
ADJUSTING SET SPEED
(3)
(1)
Push once: On Push twice: Off
(2)
TOYOTA SAFETY SENSE
ADJUSTING DISTANCE
This mode employs a radar sensor to detect the presence of a preceding vehicle up to approximately 328 ft (100m) ahead, determines the current vehicle-to-vehicle following distance and operates to maintain a preset following distance from the vehicle ahead. These distances vary based on vehicle speed.
(1) Constant speed cruising when there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle distance control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle. When a greater reduction in vehicle speed is necessary, the system applies the brakes (the brake lights will come on at this time). The system will respond to changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by the driver. A warning tone warns you when the system cannot decelerate sufficiently to prevent your vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill slopes.
1 The set speed may be resumed once vehicle speed exceeds 25 mph. 2 The set speed may also be cancelled by depressing the brake pedal.
Dynamic Radar Cruise Control (DRCC)* or Full-Speed Range DRCC**
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. This mode is always selected first when the cruise control button is depressed. Constant speed cruise control mode is also available. Full-Speed Range DRCC is designed to function at speeds between 0 to approximately 110 MPH and is intended for highway use.
Display
Set speed
Dynamic Radar Cruise Control vehicle-to-vehicle distance button
Cruise control switchIndicators
Refer to page 38 for switching to Constant Speed (Cruise) Control Mode.
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a slower vehicle traveling in front and accelerate back up to the selected speed if the vehicle in front changes lanes or speeds up. (1) Push to turn DRCC system ON. (2) Use the steering wheel controls to increase speed by pushing +RES or
decrease the speed by pushing -SET. Push and hold to make a large adjustment or push each time to make fine adjustments (1 mph [1.6 km/h] or 1 km/h [0.6 mph] increments).
(3) Push Cancel to cancel the adjusting speed operation.
Increase speed/Resume1
Cancel2
Decrease speed
* Manual transmission, ** Continuously variable transmission
2019_Corolla_HB_QRG_V5_0516.indd 36 5/17/18 11:12 PM
37
ADJUSTING DISTANCE
To change the vehicle-to-vehicle distance Push the button to cycle through the settings, which will change progressively.
This mode employs a radar sensor to detect the presence of a preceding vehicle up to approximately 328 ft (100m) ahead, determines the current vehicle-to-vehicle following distance and operates to maintain a preset following distance from the vehicle ahead. These distances vary based on vehicle speed.
LONG (default setting) MIDDLE SHORT
(1) (2) (3)
(1) Constant speed cruising when there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle distance control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle. When a greater reduction in vehicle speed is necessary, the system applies the brakes (the brake lights will come on at this time). The system will respond to changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by the driver. A warning tone warns you when the system cannot decelerate sufficiently to prevent your vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill slopes.
1 The set speed may be resumed once vehicle speed exceeds 25 mph. 2 The set speed may also be cancelled by depressing the brake pedal.
Preceding vehicle mark
Dynamic Radar Cruise Control (DRCC)* or Full-Speed Range DRCC**
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. This mode is always selected first when the cruise control button is depressed. Constant speed cruise control mode is also available. Full-Speed Range DRCC is designed to function at speeds between 0 to approximately 110 MPH and is intended for highway use.
Dynamic Radar Cruise Control vehicle-to-vehicle distance button
Cruise control switch
Refer to page 38 for switching to Constant Speed (Cruise) Control Mode.
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a slower vehicle traveling in front and accelerate back up to the selected speed if the vehicle in front changes lanes or speeds up. (1) Push to turn DRCC system ON. (2) Use the steering wheel controls to increase speed by pushing +RES or
decrease the speed by pushing -SET. Push and hold to make a large adjustment or push each time to make fine adjustments (1 mph [1.6 km/h] or 1 km/h [0.6 mph] increments).
(3) Push Cancel to cancel the adjusting speed operation.
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
* Manual transmission, ** Continuously variable transmission
2019_Corolla_HB_QRG_V5_0516.indd 37 5/17/18 11:12 PM
38
TOYOTA SAFETY SENSE
SWITCHING TO CONSTANT SPEED (CRUISE) CONTROL MODE
SETTING CONSTANT SPEED (CRUISE) CONTROL
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC , push ON-OFF button to turn the system off first, then push and hold ON-OFF button for at least 1.5 seconds to switch. Note: When the engine is turned off, it will automatically default to DRCC.
Refer to a Toyota Owners Manual for additional information on DRCC operation, settings adjustments, limitations, and precautions before attempting to use it.
1.5 seconds
Set
(3) Acceleration when there are no longer any preceding vehicles driving slower than the set speed
The system accelerates until the set speed is reached. The system then returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SPEED on page 36.
ADJUSTING DISTANCE (CONTINUED)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically turned on (after approximately 1 second): Vehicle speed is above approximately 21 mph (34 km/h). The area ahead of the vehicle is dark. There are no oncoming or preceding vehicles with headlights or tail lights turned on. There are few streetlights on the road ahead. If any of these conditions occur, high beams will be automatically turned off: Vehicle speed drops below approximately 17 mph (27 km/h). The area ahead of the vehicle is not dark. Oncoming or preceding vehicles have headlights or tail lights turned on. There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of whats ahead at nighttime without and reduce glare for oncoming drivers, AHB uses an in-vehicle camera to help detect the headlights of oncoming vehicles and tail lights of preceding vehicles, then automatically switches between high and low beams as appropriate to provide the most light possible and enhance forward visibility. By using high beams more frequently, the system may allow earlier detection of pedestrians and obstacles. Refer to the Toyota Owners Manual for additional information on AHB operation, settings adjustments, limitations, and precautions before attempting to use it.
(1) Press the switch. (2) Push lever away from you with the headlight switch is in the or AUTO
position. (3) Press the switch.
The AHB indicator will come on when the headlights are turned on automatically to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB system off.
The AHB indicator will turn off. To turn switch to position and the manual high beam indicator turns on.
2019_Corolla_HB_QRG_V5_0516.indd 38 5/17/18 11:12 PM
39
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC , push ON-OFF button to turn the system off first, then push and hold ON-OFF button for at least 1.5 seconds to switch. Note: When the engine is turned off, it will automatically default to DRCC.
Refer to a Toyota Owners Manual for additional information on DRCC operation, settings adjustments, limitations, and precautions before attempting to use it.
(3) Acceleration when there are no longer any preceding vehicles driving slower than the set speed
The system accelerates until the set speed is reached. The system then returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SPEED on page 36.
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically turned on (after approximately 1 second): Vehicle speed is above approximately 21 mph (34 km/h). The area ahead of the vehicle is dark. There are no oncoming or preceding vehicles with headlights or tail lights turned on. There are few streetlights on the road ahead. If any of these conditions occur, high beams will be automatically turned off: Vehicle speed drops below approximately 17 mph (27 km/h). The area ahead of the vehicle is not dark. Oncoming or preceding vehicles have headlights or tail lights turned on. There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of whats ahead at nighttime without and reduce glare for oncoming drivers, AHB uses an in-vehicle camera to help detect the headlights of oncoming vehicles and tail lights of preceding vehicles, then automatically switches between high and low beams as appropriate to provide the most light possible and enhance forward visibility. By using high beams more frequently, the system may allow earlier detection of pedestrians and obstacles. Refer to the Toyota Owners Manual for additional information on AHB operation, settings adjustments, limitations, and precautions before attempting to use it.
(2) (1)
(1) Press the switch. (2) Push lever away from you with the headlight switch is in the or AUTO
position. (3) Press the switch.
The AHB indicator will come on when the headlights are turned on automatically to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB system off.
The AHB indicator will turn off. To turn switch to position and the manual high beam indicator turns on.
2019_Corolla_HB_QRG_V5_0516.indd 39 5/17/18 11:12 PM
40
TOYOTA SAFETY SENSE
Road Sign Assist (RSA) Road Sign Assist is designed to help ensure drivers are kept informed. The RSA system recognizes specific road signs using a forward-facing intelligent camera to provide information to the driver via a Multi-information Display (MID). If the system judges that the vehicle is being driven over the speed limit, or performing actions prohibited by other support types of road signs. It alerts the driver using a warning display and may sound a warning buzzer.
RSA DISPAY
SUPPORTED TYPES OF ROAD SIGNS
SETTING RSA
When the driving support system information is selected, a maximum of 3 signs can be displayed.
Speed limit Stop
Do Not Enter Yield
When a tab other than the driving support system information is selected, only a recognized speed limit sign or do not enter sign (when notification is necessary) will be displayed.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: If the engine switch was last turned off while a speed limit sign was displayed on the multi-information display, the same sign displays again when the engine switch is turned to ON.
Refer to a Toyota Owners Manual for additional information on RSA operation, settings adjustments, limitations, and precautions before attempting to use it.
SAFETY & EMERGENCY FEATURES
Moving the lever downward will allow the door to be opened only from the outside.
NOTE: If a passengers seat belt is fully extended, then retracted even slightly, the Automatic locking retractor (ALR) will prevent it from being re-extended beyond that point, unless fully retracted again. This feature is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint system, refer to the Owners Manual.
2019_Corolla_HB_QRG_V5_0516.indd 40 5/17/18 11:12 PM
41
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Road Sign Assist (RSA) Road Sign Assist is designed to help ensure drivers are kept informed. The RSA system recognizes specific road signs using a forward-facing intelligent camera to provide information to the driver via a Multi-information Display (MID). If the system judges that the vehicle is being driven over the speed limit, or performing actions prohibited by other support types of road signs. It alerts the driver using a warning display and may sound a warning buzzer.
When a tab other than the driving support system information is selected, only a recognized speed limit sign or do not enter sign (when notification is necessary) will be displayed.
(1) Press switches and select from the Multi-Information Display (MID). (2) Press switches and select the setting function and then press . (3) Press each time to change the setting. (4) Press to go back to the menu.
Note: If the engine switch was last turned off while a speed limit sign was displayed on the multi-information display, the same sign displays again when the engine switch is turned to ON.
Refer to a Toyota Owners Manual for additional information on RSA operation, settings adjustments, limitations, and precautions before attempting to use it.
SAFETY & EMERGENCY FEATURES
Moving the lever downward will allow the door to be opened only from the outside.
Unlock
Lock
Push up to raise
Push lock release to lower
Rear door child safety locks
Seat belts-Shoulder belt anchor
Seat belts
NOTE: If a passengers seat belt is fully extended, then retracted even slightly, the Automatic locking retractor (ALR) will prevent it from being re-extended beyond that point, unless fully retracted again. This feature is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint system, refer to the Owners Manual.
Keep as low on hips as possible
Take up slack
Too high
2019_Corolla_HB_QRG_V5_0516.indd 41 5/17/18 11:12 PM
42
SAFETY & EMERGENCY FEATURES Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can be displayed on the multi-information display (MID).
Refer to the load label on the door jamb or the Owners Manual for tire inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
The tire pressure warning system can be selected on of the multi- information display (MID). System rest initialization
(1) Press switches and select from the Multi-Information Display (MID).. (2) Press switches and select the Vehicle Settings, them push . (3) Select TPWS and them push . (3) Select Set Pressure then push and hold until the warning light blinks
three times.
Safety Connect is a subscription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Toyotas designated response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include: Automatic collision notification Stolen vehicle location Emergency assistance (SOS button) Enhanced roadside assistance
Contact your dealer for more information about Safety Connect.
For details, refer to the Owners Manual or visit www.Toyota.com/safety-connect.
2019_Corolla_HB_QRG_V5_0516.indd 42 5/17/18 11:12 PM
43
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can be displayed on the multi-information display (MID).
Refer to the load label on the door jamb or the Owners Manual for tire inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
The tire pressure warning system can be selected on of the multi- information display (MID). System rest initialization
(1) Press switches and select from the Multi-Information Display (MID).. (2) Press switches and select the Vehicle Settings, them push . (3) Select TPWS and them push . (3) Select Set Pressure then push and hold until the warning light blinks
three times.
Safety Connect (if equipped)
Safety Connect is a subscription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Toyotas designated response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include: Automatic collision notification Stolen vehicle location Emergency assistance (SOS button) Enhanced roadside assistance
Microphone
LED light indicators
SOS button
Contact your dealer for more information about Safety Connect.
For details, refer to the Owners Manual or visit www.Toyota.com/safety-connect.
2019_Corolla_HB_QRG_V5_0516.indd 43 5/17/18 11:12 PM
44
SAFETY & EMERGENCY FEATURES
Tire repair kit components
Hose
Spare tire & tools
TOOL LOCATION Jack and tools
Refer to the Owners Manual for jack positioning and tire changing procedures.
TOOL LOCATION
REMOVING THE SPARE TIRE
Towing eyelet
Wheel nut wrench Jack
Spare tire
Jack handle
Refer to the Owners Manual for jack positioning and tire changing procedures.
(2) Loosen the center fastener that secures the spare tire.
(1) Remove the deck board.
(When the luggage cover is installed) (When the luggage cover is not installed)
2019_Corolla_HB_QRG_V5_0516.indd 44 5/17/18 11:12 PM
45
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Tire repair kit components
Sticker
Hose
Air release cap Rubber stopper
Power plug Air pressure gauge
Compressor switch
Tire repair kit & tools
TOOL LOCATION
Towing eyelet Wheel nut wrench*
Jack* *If equipped.Emergency tire puncture repair kit
Emergency tire puncture repair kit
Jack handle*
Jack and tools
Refer to the Owners Manual for jack positioning and tire changing procedures.
Refer to the Owners Manual for jack positioning and tire changing procedures.
(When the luggage cover is not installed)
2019_Corolla_HB_QRG_V5_0516.indd 45 5/17/18 11:12 PM
46
SAFETY & EMERGENCY FEATURES
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle has model-specific floor mats. Installation is easy. To keep your floor mat properly positioned, follow these steps: Only use Toyota floor mats designed for your specific model. Use only one floor mat at a time, using the retaining hooks to keep the mat in place. Install floor mats right side up.
VSC helps prevent loss of traction during cornering by reducing engine power, and Traction Control helps maintain traction on loose gravel and wet, icy, or uneven surfaces by applying brake force to the spinning wheel(s).
Toyotas TRAC sensors are activated when one of the drive wheels starts to slip. TRAC limits engine output and applies the brakes to the spinning wheel. This transfers power to the wheels that still have traction to help keep you on track.
TRACTION CONTROL (TRAC)Star Safety System
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution (EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability Control (VSC). Refer to the Owners Manual for more details and important information on limitations to these systems.
Toyotas ABS sensors detect which wheels are locking up and limits wheel lockup by pulsing each wheels brakes independently. Pulsing releases brake pressure repeatedly for fractions of a second. This helps the tires attain the traction that current road conditions will allow, helping you to stay in directional control.
ANTI-LOCK BRAKE SYSTEM (ABS)
Brake Assist is designed to detect sudden or panic braking, and then add braking pressure to help decrease the vehicles stopping distance. When theres only a split second to react, Brake Assist can add additional brake pressure more quickly than just the driver alone can.
BRAKE ASSIST (BA)
Toyotas ABS technology has Electronic Brake-force Distribution (EBD) to help maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt forward, reducing the braking power of the rear wheels. EBD responds to sudden stops by redistributing brake force to enhance the braking effectiveness of all four wheels.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
ENHANCED VEHICLE STABILITY CONTROL (VSC) Enhanced Vehicle Stability Control provides cooperative control of the ABS, TRAC, VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of traction occurs during a turn.
Smart Stop Technology automatically reduces engine power when the accelerator and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesnt engage if the brake pedal is depressed before the accelerator pedal, allowing vehicles to start on a steep hill and safely accelerate without rolling backward.
SMART STOP TECHNOLOGY (SST)
2019_Corolla_HB_QRG_V5_0516.indd 46 5/17/18 11:12 PM
47
O VE
RV IE
W FE
A TU
RE S
& O
PE RA
TI O
N S
TO YO
TA S
A FE
TY S
EN SE
SA FE
TY &
E M
ER G
EN CY
F EA
TU RE
S
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle has model-specific floor mats. Installation is easy. To keep your floor mat properly positioned, follow these steps: Only use Toyota floor mats designed for your specific model. Use only one floor mat at a time, using the retaining hooks to keep the mat in place. Install floor mats right side up.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
Always align the marks
VSC helps prevent loss of traction during cornering by reducing engine power, and Traction Control helps maintain traction on loose gravel and wet, icy, or uneven surfaces by applying brake force to the spinning wheel(s).
Toyotas TRAC sensors are activated when one of the drive wheels starts to slip. TRAC limits engine output and applies the brakes to the spinning wheel. This transfers power to the wheels that still have traction to help keep you on track.
TRACTION CONTROL (TRAC)
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution (EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability Control (VSC). Refer to the Owners Manual for more details and important information on limitations to these systems.
Toyotas ABS sensors detect which wheels are locking up and limits wheel lockup by pulsing each wheels brakes independently. Pulsing releases brake pressure repeatedly for fractions of a second. This helps the tires attain the traction that current road conditions will allow, helping you to stay in directional control.
Brake Assist is designed to detect sudden or panic braking, and then add braking pressure to help decrease the vehicles stopping distance. When theres only a split second to react, Brake Assist can add additional brake pressure more quickly than just the driver alone can.
Toyotas ABS technology has Electronic Brake-force Distribution (EBD) to help maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt forward, reducing the braking power of the rear wheels. EBD responds to sudden stops by redistributing brake force to enhance the braking effectiveness of all four wheels.
Enhanced Vehicle Stability Control provides cooperative control of the ABS, TRAC, VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of traction occurs during a turn.
Smart Stop Technology automatically reduces engine power when the accelerator and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesnt engage if the brake pedal is depressed before the accelerator pedal, allowing vehicles to start on a steep hill and safely accelerate without rolling backward.
2019_Corolla_HB_QRG_V5_0516.indd 47 5/17/18 11:12 PM
48
BLUETOOTH DEVICE PAIRING SECTION
Do not attempt the Bluetooth Pairing process while driving.
To begin the Bluetooth Pairing process, press the HOME button on the faceplate of your multimedia system.
Pairing your phone is the first step in connecting with your Toyota for hands-free calling and for audio streaming via Bluetooth. This pairing process is quick and easy. All you have to do is setup the phone and multimedia system to form a connection.1
iPhone bluetooth Menu
1 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
STEP 1
STEP 2
STEP 4
2019_Corolla_HB_QRG_V5_0516.indd 48 5/17/18 11:12 PM
49
BLUETOOTH DEVICE PAIRING SECTION
To begin the Bluetooth Pairing process, press the HOME button on the faceplate of your multimedia system.
Bluetooth Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for hands-free calling and for audio streaming via Bluetooth. This pairing process is quick and easy. All you have to do is setup the phone and multimedia system to form a connection.1
Select "Bluetooth", then select "Add New Device"on display screen.
Ensure Bluetooth is turned on for your device.
Select "Device Name".
iPhone bluetooth Menu Android bluetooth Menu
1 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
Check the display on your smart phone. Does the PIN XXXX match the PIN displayed? If it does select "Pair".
Press [MENU] on the faceplate, then select "Setup" on display screen. Entune Audio/Entune Audio Plus Entune Premium Audio
STEP 1
STEP 2
STEP 4
STEP 3
STEP 5
2019_Corolla_HB_QRG_V5_0516.indd 49 5/17/18 11:12 PM
50
BLUETOOTH DEVICE PAIRING
"Connecting" displays while device is forming the connection to your multimedia system.
Enable Notifications (text message). While pairing your device message will display: "You may need to allow message access on your phone".
Note: You may also select "Skip" on display screen to skip enabling notifications. If skipped proceed to Step 8.
Turn on "Show Notifications" for iPhone or "ON" for Android.
A confirmation will appear once your phone has been paired and connected.
iPhone Android
Bluetooth Pairing for your phone (cont.)
STEP 6
STEP 8
STEP 7
STEP 9
NOTES
2019_Corolla_HB_QRG_V5_0516.indd 50 5/17/18 11:12 PM
51
Enable Notifications (text message). While pairing your device message will display: "You may need to allow message access on your phone".
Note: You may also select "Skip" on display screen to skip enabling notifications. If skipped proceed to Step 8.
A confirmation will appear once your phone has been paired and connected.
NOTES
2019_Corolla_HB_QRG_V5_0516.indd 51 5/17/18 11:12 PM
52
NOTES
2019_Corolla_HB_QRG_V5_0516.indd 52 5/17/18 11:12 PM
2019_Corolla_HB_QRG_V5_0516.indd 53 5/17/18 11:12 PM
00505QRG19CORHB
2 0 1 9
www.toyota.com/owners
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
Printed in U.S.A. 5/18
18-MKG-11873
COROLLA HATCHBACK
18-MKG-11873_QRG_Cover_COROLLA_HATCHBA
Related manuals for Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide
Manualsnet FAQs
If you want to find out how the Corolla Hatchback Toyota works, you can view and download the Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide on the Manualsnet website.
Yes, we have the Quick Reference Guide for Toyota Corolla Hatchback as well as other Toyota manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Reference Guide should include all the details that are needed to use a Toyota Corolla Hatchback. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Toyota Corolla Hatchback 2019 Hatchback Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.