Contents

Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual PDF

1 of 64
1 of 64

Summary of Content for Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual PDF

Owners Manual for AM/FM/HD Radio Broadcast/CD Player with iPod/

USB control/Bluetooth-Audio

Audio System TOYOTA PART NO. PT546-00120

Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment.

FCC ID : AJDK036 MODEL NO. : DEH-8018ZT IC : 775E-K036 This device complies with Part 15 of the FCC Rules and RSS- Gen of the IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and () this device must accept any interference received, including interference that may cause undesired operation of the device.

Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

[For Canadian model] This Class B digital apparatus complies with Canadian ICES- 003.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-10 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 0cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).

WARNING Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling.

USE OF CONTROL OR ADJUST- MENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADI- ATION EXPOSURE. THE USE OF OPTICAL INSTRU- MENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

3

3

Features CD playback Music CD/CD-R/CD-RW playback is possible.

MP3 file playback You can play back MP3 files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/Level standard recordings) or USB portable audio player/USB memory.

Supply of this product only con- veys a license for private, non- commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-gen- erating) real-time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/ streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

WMA file playback You can play back WMA files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/Level standard recordings) or USB portable audio player/USB memory.

AAC file playback You can play back AAC files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/Level standard recordings) or USB portable audio player/USB memory.

iPod compatibility When you use this unit, you can control an iPod, iPod classic, iPod nano, iPod touch, iPhone. (Refer to page 1.)

About WMA Windows Media is either a regis- tered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.

NOTICE

This unit may not operate correctly depending on the application used to encode WMA files.

4

4

About iPod Reproducing and playing back non-copyrighted material and material that can legally be reproduced and played back for private use is permitted with the iPod. Infringement of copyright is legally prohibited. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

In this manual, iPod and iPhone will be referred to as iPod.

About XM radio

XM Satellite Radio and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsid- iaries. All rights reserved. Service not available in Alaska and Hawaii.

About HD Radio Technology

HD RadioTM Technology manu- factured under license from iBiq- uity Digital Corporation. U.S. and Foreign Patents. HD RadioTM and the HD, HD Radio, and Arc logos are proprietary trademarks of iBiq- uity Digital Corp.

About Bluetooth

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.

5

5

Important information about this manual For safety reasons, this manual indicates items requiring particular attention with the following marks.

NOTICE

This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your vehicle and its equipment.

CAUTION

This is a warning against any- thing which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others.

To ensure the correct audio system operation

Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. Do not put anything other than a Compact Disc into the slot. The use of cellular phones inside or near the vehicle may cause noise from the audio system speakers you are listening to. However, this does not indicate a malfunction.

The Safety of Your Ears is in Your Hands Get the most out of your equip- ment by playing it at a safe levela level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing comfort level adapts to higher

volumes of sound, so what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equip- ment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

Set your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

Do not turn up the volume so high that you cant hear whats around you. Use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

6

6

Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About WMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About XM radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About HD Radio Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important information about this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To ensure the correct audio system operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The Safety of Your Ears is in Your Hands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Main Displays and Possible Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11 Listening to the RADIO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Listening to the HD Radio broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15 Listening to a CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 Listening to MP3/WMA/AAC DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-0 About handling the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-1 Connecting the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- Disconnecting the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Listening to songs on the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 ABC SEARCH on an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About handling the USB portable audio player/USB memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting the USB portable audio player/USB memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Listening to USB portable audio player/USB memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 How to subscribe to XM Satellite Radio

7

7

Main Displays and Possible Operations

or

RIGHTLEFT

UP

DOWN

ROTARY ENCODER

Possible operations are indicated.

The following are the main displays that appear during UP/DOWN/RIGHT/LEFT and ROTARY ENCODER operation. Each display indicates the operations that are currently available.

You can select the next or the previous track on a CD or iPod by pressing the RIGHT/LEFT.

You can select a setting option, etc. by pressing the UP/DOWN/RIGHT/LEFT or UP/DOWN.

You can select a setting option, etc. by pressing the center of the ROTARY ENCODER.

You can navigate a list or edit the OPENING TITLE by pressing the ROTARY ENCODER in the center or the UP/DOWN/RIGHT/LEFT.

You can select the next or the previous track or select a folder on a CD , in a USB memory or Bluetooth-Audio player by pressing the UP/DOWN/RIGHT/LEFT.

You can tune or seek a radio frequency by pressing the UP/DOWN/RIGHT/LEFT.

You can tune the Satellite Radio broadcasting frequency or display and switch the category by pressing the UP/DOWN/RIGHT/LEFT.

Turn the ROTARY ENCODER to the right or left to adjust the volume level, select a menu or select an item from a list. Press the ROTARY ENCODER in the center to set a selecting an item.

8

8

Basic Operation Your audio system works when the ignition switch is in the ACC or ON position.

NOTICE

To avoid draining the battery, do not leave the car audio on longer than necessary when the engine is not running.

1 POWER Press to turn the unit on or off.

2 ROTARY ENCODER/VOLUME Turn the ROTARY ENCODER to raise/lower the volume levels (total volume step is 64). ROTARY ENCODER operation varies depend- ing on the audio source or Menu. (Refer to page 7.) To select the following set- ting options, press the ROTARY ENCODER to switch to the AUDIO MENU. Turn the ROTARY ENCODER clockwise or counterclockwise to select an item and press the ROTARY ENCODER. You can select SETTINGS in TUNER mode or iPod mode.

SSP AUDIO CTRL SETTINGS BLUETOOTH PHONE

9

9

SSP (Scion Sound Processing) SSP is a modified DSP (Digital Signal Processing) system that provides a customized sound for your vehicle. Press the ROTARY ENCODER to dis- play the current SSP mode setting. While the setting is displayed, press repeatedly to switch to the following modes.

NATURAL: Natural and smooth sound that gives no listening fatigue but comfort.

HEAR: A powerful, energetic, live sound.

FEEL: Players sound > reproduc- es the sound on the stage that musicians hear.

For more details, please visit the SCION Web site at http://www.scion.com/.

Each time you press it, the SSP changes in the following order: NATURAL HEAR FEEL

AUDIO CTRL When the ROTARY ENCODER is turned, the setting item of the AUDIO CTRL menu will switch in the following order:

FADER BALANCE BASS TREBLE ASL (Automatic Sound Levelizer) SUB-W (Subwoofer) ASR (Sound Retriever)

FADER: Turn the ROTARY ENCODER to adjust the sound balance between the rear and front speakers. The display ranges from R7 to F7.

BALANCE: Turn the ROTARY ENCODER to adjust the sound balance between the left and right speakers. The display ranges from L7 to R7.

BASS: Turn the ROTARY ENCODER to adjust low-pitched tones. The display ranges from 5 to 5.

TREBLE: Turn the ROTARY ENCODER to adjust high-pitched tones. The display ranges from 5 to 5.

ASL: During driving, noise in the car changes according to the driving speed. The Automatic Sound Levelizer (ASL) automatically adjusts the volume based on driving speed. If this noise becomes greater, the sensitivity (variation of volume level to noise level) of ASL can be set to one of three levels. Press the ROTARY ENCODER changes the ASL setting as follows: LOW MID HIGH OFF

SUB-W: Subwoofer output phase can be

switched between normal and reverse by pressing the ROTARY ENCODER, Turn the ROTARY ENCODER up or down to adjust the output level of the subwoofer. Each time ROTARY ENCODER is turned up or down, subwoofer level increases or decreases. (+6 to 24 is displayed as the level is increased or decreased.) The output level and output phase

of the subwoofer can be adjusted only when "SUB-W CTRL" on the SETUP MENU is set to ON. While "SUB-W CTRL" is set to OFF, the output level and output phase cannot be adjusted. (Refer to page 52.)

ASR: The ASR (Sound Retriever) function provides a wide, deep and rich quality to MP3/WMA/AAC sound, which gives the user a lively impression. Pressing the ROTARY ENCODER repeatedly switches the setting in the following order: LOW RATE HIGH RATE OFF LOW RATE: Effective for low-compres-

sion audio media. HIGH RATE: Effective for high-compres-

sion audio media.

10

10

NOTICE

The ASR function can only be selected when playing MP3/ WMA/AAC from CD and iPod, USB portable audio player/ USB memory/Bluetooth- Audio. The ASR function does not support external compressed audio media. Switching of ASR settings is disabled in Bluetooth-Audio mode when no Bluetooth device is connected or when settings cannot be switched. BASS function and TREBLE function values can be set for each of the modes (AM, FM, CD/MP3/WMA/AAC, iPod/USB portable audio player/USB memory, XM Satellite Radio, Bluetooth audio player, AUX). When you switch modes, the settings change to the BASS and TREBLE values set for the selected mode. The ASL function is only effective when the vehicle is moving.

SETTINGS You can select this item in TUNER mode or iPod mode. If you select SETTINGS, you can set the following items.

HD ON/OFF (in TUNER mode) IPOD DIRECT (in iPod mode) AUDIO BOOK (in iPod mode)

To select a setting option in iPod mode, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER.

IPOD DIRECT AUDIO BOOK

HD ON/OFF: If you set HD ON/OFF to ON, digital broadcasting is preferentially selected. During SCAN or SEEK operations, the tuner searches for all digital and analog broadcasting stations. If you set HD ON/OFF to OFF, only analog broadcasting is selected. During SCAN or SEEK operations, the tuner searches only for analog broadcasting stations. When the ROTARY ENCODER is pressed, switches in the following order: ON OFF The setting can only be changed in

RADIO mode.

IPOD DIRECT: A menu for turning on or off iPod direct control (in iPod mode). If you select ON, you can control iPod operations on the iPod, and you can control only the vol- ume of iPod from this unit. If you select OFF, you can control iPod operations from this unit. When the ROTARY ENCODER is pressed, switches in the following order:

OFF ON The setting can only be changed in

iPod mode.

AUDIO BOOK: You can change the iPod Audiobook playback speed. Pressing the ROTARY ENCODER repeatedly switches the setting in the following order: NORMAL FASTER SLOWER The speed can only be changed in

iPod mode. While IPOD DIRECT is set to ON, the

speed cannot be changed.

NOTICE

iPod (5th generation) and iPod nano (1st generation) do not support iPod direct control.

11

11

BLUETOOTH If you select BLUETOOTH, you can make the settings for connecting and controlling Bluetooth devices. To select the following setting options, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER. Refer to page 38 Bluetooth Settings.

BT PAIRING LIST PHONE LIST AUDIO SET PASSKEY BT POWER ON/BT POWER OFF BT INFO DISPLAY ON/DISPLAY OFF INITIALIZE BT PAIRING:

You can connect your Bluetooth devices.

LIST PHONE: You can connect or disconnect a reg- istered Bluetooth-compatible mobile phone, or delete it from the list.

LIST AUDIO: You can connect or disconnect a reg- istered Bluetooth device, delete the device from the list, and select the connection method.

SET PASSKEY: You can set the passkey.

BT POWER ON/BT POWER OFF: You can select whether or not to auto- matically connect a Bluetooth device when the ignition switch is set to ON.

BT INFO: You can check the name and address of this unit.

DISPLAY ON/DISPLAY OFF: You can select whether or not to dis- play the connection confirmation when a Bluetooth device is connected by setting the ignition switch to ON.

INITIALIZE: You can initialize certain setting infor- mation or all settings.

PHONE If you select PHONE, you can edit the phonebook, set the ring tone or transfer the call histories. To select the following items, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER.

PHONE BOOK SET HF SOUND SEND HISTORY PHONE BOOK:

You can edit the phonebook in this unit.

SET HF SOUND: When a mobile phone is connected, you can select the ring tone and adjust the volume of the call tone and ring tone.

SEND HISTORY: You can transfer the call histories on the connected mobile phone to this unit. When the ROTARY ENCODER is pressed, switches in the following order: YES NO

3 BACK Press the BACK button to exit from the menu. Press and hold the BACK button to exit from a list that was displayed by pressing the LIST button.

1

1

Listening to the RADIO 1 FM1/2

Switches between FM1 and FM2 modes.

2 AMSAT Switches between the AM mode and SAT1/2/3 modes. (must have Satellite Radio receiver and antenna installed at an additional charge to listen to Satellite Radio.)

3 LIST Press to display the registered broad- casting station list in PRESET1-6. Use the ROTARY ENCODER to select a station from the list.

13

13

4 ROTARY ENCODER (SELECT LIST) Turn the ROTARY ENCODER clockwise or counterclockwise to select a station. Press the ROTARY ENCODER to set the station. If you press and hold the ROTARY ENCODER in the center until you hear a beep, the currently tuned sta- tion is stored as a preset channel in the preset channel list.

5 RIGHT (TUNE ) Press to manually select (one step at a time) the station with the next higher frequency. Press and hold to fast-forward to a higher frequency.

6 UP (TUNE ) Press to select the next higher sta- tion. Press and hold to continue searching for a higher frequency station.

7 LEFT (TUNE ) Press to manually select (one step at a time) the station with the next lower frequency. Press and hold to fast-forward to a lower frequency.

8 DOWN (TUNE ) Press to select the next lower station. Press and hold to continue searching for a lower frequency station.

9 PRESET 1-6 Press to recall previously stored sta- tions (Preset Channels). Press and hold until you hear a beep, and the station you are cur- rently tuned to is stored as a Preset Channel.

NOTICE

You can store up to 6 stations per band.

a SCAN If you press, is indicated in the display. The tuner begins searching for stations with good reception and you can listen to each channel for 5 seconds.

14

14

Listening to the HD Radio broadcast HD RadioTM Technology is a terrestrial digital radio broadcast that utilizes AM/FM analogue broadcasting fre- quencies to transmit digital signals. For information regarding viewing methods, refer to Listening to the RADIO (page 1). This section con- tains explanations solely regarding HD Radio broadcast functions.

15

15

1 RIGHT (TUNE ) When receiving the HD Radio Broadcast signal and tuning in a Multicast Channel-supported broadcast in something other than analogue, the following actions will occur each time you press.

When receiving MPS signal

The first SPS is tuned in.

When receiving SPS signal

The next SPS is tuned in.

When receiving last SPS

The next MPS is tuned in.

2 LEFT (TUNE ) When receiving the HD Radio Broadcast signal and tuning in a Multicast Channel-supported broadcast in something other than analogue, the following actions will occur each time you press.

When receiving MPS signal

The previous MPS is tuned in.

When receiving SPS signal

The previous SPS is tuned in. Or, the next MPS is tuned in.

When receiving next SPS signal

The first SPS is tuned in.

3 TEXT If you press while the HD Radio broadcasting signal is being recieved, the display switches in the following order. Upper: Station Name Lower: Frequency

Artist Name Song Title

Album Title Song Title

16

16

.No title name is displayed when playing back a CD containing no te xt information.

Listening to a CD

NOTICE

Never try to disassemble or oil any part of the compact disc player. Do not insert anything except a compact disc into the slot. Use 1-cm disc. Do not use 8-cm disc or an adapter for 8-cm disc.

Load a CD in the CD slot.

17

17

1 DISC Switches to the CD mode. (Only effective if a disc is loaded.)

2h (EJECT) Press to eject the disc.

3 LIST Press to display a CD List. Use the ROTARY ENCODER to select a CD from the list.

4 ROTARY ENCODER (SELECT LIST) Turn the ROTARY ENCODER clock- wise or counterclockwise to select the desired title. Press the ROTARY ENCODER in the center to start play- back. No CD List is displayed when play-

ing back a CD containing no text information.

5 UP/DOWN (SELECT LIST) Press to select the desired title.

6 RIGHT (TRACK ) Press to proceed to the next track. Press and hold until you hear a beep. Playing of the track is fast forwarded. (There is sound.)

7 LEFT (TRACK ) Press to takes you back to the start of the track currently playing. Press to return to the previous track once more. Press and hold until you hear a beep. Playing of the track is reversed. (There is sound.)

8 PRESET1 (PLAY/PAUSE) To pause the CD, press PRESET 1 while the CD is playing. Press again to resume playing.

9 PRESET5 (Random) If you press this, and is indicated in the display. This unit starts to play tracks on the disc being played in random order. Press again to cancel.

a PRESET6 (Repeat) If you press this, and is indi- cated in the display. This unit starts to repeat the track being played. Press again to cancel.

b SCAN If you press this, and is indi- cated in the display. This unit starts to play the first 10 seconds of each track on the CD being played. Press again to cancel.

c TEXT Press, and display indications change as follows (TEXT CD only): Upper: Artist Name Lower: Track Title

Track Title ELAPSED TIME

Disc Title Track Title

When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis- played.

CAUTION

Compact disc players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player correctly.

18

18

Listening to MP3/ WMA/AAC DISC

1 DISC Switches to the DISC mode. (Only effective if a disc is loaded.)

2h (EJECT) Press to eject the disc.

3 LIST Press to display an MP3/WMA/AAC List. Use the ROTARY ENCODER to select an item from the list.

4 ROTARY ENCODER (SELECT LIST) Turn the ROTARY ENCODER clock- wise or counterclockwise to select a file or folder. Press the ROTARY ENCODER in the center to play the selected file or folder. Use the ROTARY ENCODER to select an item from the list. (When a folder is selected, the first track in the folder is played.) The MP3/WMA/AAC List is dis- played when the top folder in the root directory or the file or folder name is selected.

19

19

5 RIGHT (TRACK ) Press to proceed to the next file. Press and hold until you hear a beep. Playing of the file is fast forwarded. (There is no sound.)

6 LEFT (TRACK ) Press to takes you back to the start of the file currently playing. Press to return to the previous file once more. Press and hold until you hear a beep. Playing of the file is reversed. (There is no sound.)

7 UP (FOLDER ) Press to proceed to the next folder.

8 DOWN (FOLDER ) Press to return to the previous folder. Press and hold until you hear a beep to jump to HOME. HOME means returning back to play the first file in the first folder on the CD being played.

9 PRESET1 (PLAY/PAUSE) To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.

a PRESET5 (Random) If you press this, and is indi- cated in the display. This unit starts to play files in the folder being played in random order. Press again to can- cel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play files in all folders on the disc being played in random order. Press again to cancel.

b PRESET 6 (Repeat) If you press this, and is indi- cated in the display. This unit starts to repeat the file being played. Press again to cancel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to repeat the folder being played. Press again to cancel.

c SCAN If you press this, and is indi- cated in the display. This unit starts to play the first 10 seconds of each file in the folder being played. Press again to cancel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play the first 10 seconds of the first file of each folder. Press again to cancel.

d TEXT Press and display indications change as follows: Upper: Artist Name Lower: Track Title

Track Title ELAPSED TIME

Folder Name File Name

When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis- played.

0

0

NOTICE

When playing back a disc recorded with the Multi Session system, the first session only is played back. If the first session combines MP3, WMA and AAC files and music data (CD-DA), this product only plays the music data. (Refer to page 54.)

About handling the iPod

About iPod settings

This unit supports only an iPod featuring the Dock connector port. Operations may vary depending on the software version of iPod. The iPod Equalizer setting set by the iPod is not used. The Shuffle function of the iPod is operated as Random on this unit.

CAUTION

Store the data into another media, to avoid losing the data during iPod operation with this unit. Do not allow direct sunlight to fall on the iPod when it is not being used. Extended exposure to direct sunlight can result in iPod malfunction due to the resulting high temperatures. Do not leave the iPod in high temperatures or direct sunlight. Fix the iPod securely when using with this unit. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.

For details, refer to the User Guide of your iPod.

1

1

About iPod software version

The iPod software versions that can be used with this unit are as follows (operations verified as of October 010):

iPod (5th generation) ver. 1.3 iPod classic ver. 2.0 iPod classic 120 GB ver. 2.0.1 iPod classic 160 GB ver. 2.0.4 iPod nano (1st generation) ver. 1.3.1 iPod nano (2nd generation) ver. 1.1.3 iPod nano (3rd generation) ver. 1.1.3 iPod nano (4th generation) ver. 1.0.4 iPod nano (5th generation) ver. 1.0.1 iPod nano (6th generation) ver. 1.0 iPod touch (1st generation) iOS3.0 iPod touch (2nd generation) iOS3.0 iPod touch (3rd generation) iOS3.1.1 iPod touch (4th generation) iOS4.1 iPhone iOS3.1.2 iPhone 3G iOS3.0 iPhone 3GS iOS3.0.1 iPhone 4 iOS4.1

* Please note that no guarantee applies to iPod operations and future updated versions of iPod software.

Connecting the iPod Connect the USB connector. Connect the iPod as indicated in the figure below using a USB cable. Push the Dock connector into the Dock connector port until you hear a click to connect firmly. If it does not go in smoothly, it may be upside down so do not force it in as this may result in damage.

To the vehicle's USB connector *2

*1

USB port

iPod with Dock connector port

Dock connector

When connecting the iPod, remove a headphone cable from the iPod. When connecting the iPod, it is recommended to use a separately purchased car kit.

*1

It is recommended to use a USB cable which satisfies USB 2.0 standards. (Measurements should satisfy USB 2.0 standards) *2

Connection location differs depending on the vehicle.

Vehicle type

Connection location

tC Connect to the USB connector near the shift knob.

xB Connect to the USB connector near the parking brake.

xD Connect to the USB connector near the cup holder.

iQ Connect to the USB connector near the shift knob.

As soon as the iPod is connected, its power is automatically turned on. While the iPod is connected to this unit, the Apple logo (or (check mark)) is displayed on the iPod.

While the iPod is connected to this unit, the iPod itself cannot be turned on or off. You cannot use the iPod's remotecontrol at the same time. You may hear noise if you disconnect during iPod playback.

NOTICE

To resolve most problems when using your iPod with the Scion Audio system, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to the User Guide of your iPod. Connect the Dock connector directly to the iPod with Dock connector port. Do not connect it via the iPod Dock or other connection. When the iPod is connected to this unit, sound will also be heard from the headphone of the iPod. Disconnect the headphone from the iPod before use. If you install an audio system other than a Scion Genuine Audio, you will not be able to use the USB connector.

If the iPod does not operate with Scion Audio system, disconnect the connector from the iPod and re- connect again. When you are using iPhone by the multitasking, according to the application under use, it might not be able to charge a battery.

Disconnecting the iPod Remove the connector.

When disconnecting the iPod connector, grasp the connector firmly and pull it towards you.

3

3

4

4

Listening to songs on the iPod

1 iPodUSB Press the button repeatedly until the source becomes iPod.

NOTICE

If an iPod is not connected, it will not switch to iPod even if you press the iPodUSB button.

2 LIST Press the LIST button to display the category list (Playlist is the first cat- egory displayed). Use the ROTARY ENCODER to change or select the category.

3 ROTARY ENCODER (SELECT LIST) Turning the ROTARY ENCODER while the list is displayed switches the categories in the following order. Press the ROTARY ENCODER in the center to select. Playlist Artists Albums Songs Podcasts GENRES Composers Audio Book Turn the ROTARY ENCODER to select an item from the selected category, and press the ROTARY ENCODER in the center to select.

5

5

4 RIGHT (TRACK , CHAPTER ) Press to proceed to the next track or chapter. Press and hold to the right until you hear a beep. Playing of the track is fast forwarded.

5 LEFT (TRACK , CHAPTER ) Press to takes you back to the begin- ning of the track currently playing or previous chapter. Press to return to the previous track or chapter once more. Press and hold until you hear a beep. Playing of the track is reversed.

6 PRESET1 (PLAY/PAUSE) To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.

7 PRESET5 (Random) If you press this, is indicated in the display. This unit starts to play tracks on the iPod being played in random order. Pressing PRESET5 repeatedly switches between the contents of random and Off. The random changes as follows: Track Shuffle Album Shuffle Off Press and hold PRESET5 to set Shuffle all.

8 PRESET6 (Repeat) If you press this, and is indi- cated in the display. This unit starts to repeat the track being played. Press again to cancel.

9 TEXT Text information recorded on the iPod can be displayed. Up to 16 characters can be displayed at once. Press and display indications change as follows:

Upper: Artist Name Lower: Song Title

Song Title ELAPSED TIME

Album Title Song Title

When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis- played.

NOTICE

You cannot use the iPods remote control at the same time. You may hear noise if you disconnect during iPod playback. The SCAN operation is not available when listening to the iPod.

6

6

ABC SEARCH on an iPod You can search for an item in the list displayed on the iPod by the first character (alphanumeric char- acters only).

1 Press the LIST button. While the list is displayed, press the LIST button again.

ABC SEARCH is enabled.

2 Turn the ROTARY ENCODER to select a letter or numeral. For example, turn the ROTARY ENCODER right to select B.

3 Press the ROTARY ENCODER.

The search starts and the first item in the list that starts with B is displayed.

If the list does not contain any items starting with the selected character, [NOT FOUND] is displayed and ABC SEARCH is canceled.

4 Turn the ROTARY ENCODER to select the desired track.

Scroll down the list.

5 When the track you want to listen to is displayed in the center of the display, press the ROTARY ENCODER in the center. The selected track is played.

* To cancel ABC SEARCH, press the LIST button.

7

7

About handling the USB portable audio player/USB memory

For information on USB portable audio player/USB memory restrictions, refer to page 57 USB portable audio player/USB memory compatibility. For information on restrictions on folders in the USB portable audio player/USB memory, refer to page 56 About folders and MP3/WMA/AAC files.

Connecting the USB portable audio player/ USB memory

Connect the USB portable audio player/USB memory to the USB port of the USB connector. For instructions on connecting and disconnecting the iPod, refer to page 1 Connecting the iPod and page Disconnecting the iPod.

8

8

Listening to USB portable audio player/ USB memory

1 iPodUSB Press the button repeatedly until the source becomes USB portable audio player/USB memory.

For information on playback opera- tions after switching the source to USB, refer to page 18 Listening to MP3/WMA/AAC DISC.

9

9

30

30

NOTICE

An additional Genuine Toyota satellite receiver and antenna must be purchased and installed to listen to Satellite radio broadcast in your vehicle.

NOTICE

An XM Satellite Radio sub- scription is required to listen to Satellite radio in your vehicle.

CAUTION

This XM tuner supports Audio Services (Music and Talk) of only XM Satellite Radio and *Text Information linked to the respective Audio Service. *Text Information includes, Station Name, (Artist) Name, (Song) Title and Category Name. Sirius XM Radio, Inc. is solely responsible for providing services over the air to XM receivers. This XM tuner is awarded a Type Approval Certificate from Sirius XM Radio, Inc. as a proof of compliance for the services XM Satellite Radio provides.

31

31

How to subscribe to XM Satellite Radio

NOTICE

All fees and programming are the responsibility of XM Satellite Radio and are subject to change.

Listeners can subscribe by visiting XM on the Web at www.xmradio.com or by calling XMs Listener Care toll-free at (800)85-9696. Customers should have their Radio ID ready.

Display the RADIO ID Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when activating XM serv- ice or when reporting a problem.

How to display RADIO ID Select the Channel Number zero (000) by turning the ROTARY ENCODER or pressing it to the left or right.

The ID Code is displayed.

The RADIO ID is displayed as 8 alphanumeric characters.

(Refer to page 32 to check your radio ID code)

Record your ID Code below

ID CODE ___ ___ ___ ___ ___ ___ ___ ___

NOTICE

If you select another Channel, display of the ID Code is canceled.

3

3

Radio ID Refer to the corresponding chart to verify the Radio ID Code before contacting XM Satellite Radio to activate your service.

Corresponding chart

33

33

34

34

Listening to a XM Satellite Radio broadcast

1 AMSAT Switches between the AM mode and SAT1/2/3 modes.

NOTICE

Must have XM Satellite Radio receiver, antenna and service installed at an additional charge to listen to XM Satellite Radio. (Refer to pages 30 to 31.)

2 LIST Press to select the preset channel list mode. Use the ROTARY ENCODER to select a channel from the list.

35

35

3 ROTARY ENCODER (SELECT LIST) Turn the ROTARY ENCODER clock- wise or counterclockwise to select the desired channel. Broadcast will start by pressing. If you press and hold until you hear a beep, the cur- rently tuned station is stored as a preset channel in the preset channel list.

4 RIGHT (TUNE ) Press to select the next higher chan- nel. If you press and hold, you can rapidly scroll forward through the channels. While displaying Channel Category by TYPE UP/DOWN, you can select the next channel forward within the currently selected type (Channel Category) by pressing.

5 LEFT (TUNE ) Press to select the previous channel. If you press and hold, you can rapidly scroll down through the channels. While displaying Channel Category by TYPE UP/DOWN, you can select the previous channel within the currently selected type (Channel Category) by pressing the ROTARY ENCODER to the left.

6 UP (TYPE ) Press to see the Channel Category of the channel that is currently received. When Channel Category is dis- played, press again to switch to the next category.

7 DOWN (TYPE ) Press to see Channel Category of channel that is currently received. When Channel Category is dis- played, press again to switch to the previous category.

8 PRESET1-6 Press to recall previously stored channels (Preset Channels). Press and hold until you hear a beep, and the channel you are currently receiving will be stored as a Preset Channel.

NOTICE

You can store up to 6 channels per band.

9 SCAN If you press, is indicated in the display. SCAN of the currently selected type (Channel Category) starts and the tuner begins search- ing for stations with good reception. You can listen to each channel for 5 seconds.

a TEXT Press this button and the indications in the display changes as follows: Lower: Artist Name Upper: Song Title

Channel Name Song Title

NOTICE

About the Display Up to a maximum of 10 alphanumeric characters can be displayed. (Some information will not be fully displayed.)

36

36

Using the AUX By inserting a mini plug into the car AUX adapter, you can listen to music from a portable audio device through the vehicles speaker sys- tem.

1 iPodUSB Switches to the AUX mode.

CAUTION

When using a portable audio device connected to the power outlet or cigarette lighter, noise may occur during playback. If this happens, use the power source of the portable audio device.

37

37

NOTICE

If the mini plug of a commercially available cable connected to a portable audio or other component is not connected to the car AUX adapter, the mode will not change to the AUX mode even if you press the iPodUSB button. Volume level when playing a component connected with a mini plug differs to that when listening to the built-in CD player or radio so please make adjustments. If you install an audio system other than a Scion Genuine Audio, you will not be able to use the car AUX adapter.

38

38

Bluetooth Settings With this unit, you can make calls from a Bluetooth-compatible mobile phone or play music on the audio player. The following Bluetooth profiles/ protocols are compatible with this unit.

HFP OPP PBAP ADP AVRCP SDP

To make the settings for the Bluetooth device, display the BLUETOOTH menu by the follow- ing operation.

1 Press the ROTARY ENCODER to display the AUDIO menu.

2 Turn the ROTARY ENCODER to select BLUETOOTH, and press the ROTARY ENCODER.

Connecting a Bluetooth Device You can connect a Bluetooth device by the following operation. 1 Turn the ROTARY ENCODER

to select BT PAIRING, and press the ROTARY ENCODER.

2 Send the passkey from the mobile phone. Connection is completed when CONNECTED is displayed. The device is registered in the Bluetooth list in this unit. You can register up to five devices.

Connecting a Pre-registered Bluetooth Mobile Phone

You can connect a registered Bluetooth mobile phone by the fol- lowing operation. 1 Turn the ROTARY ENCODER

to select LIST PHONE, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the phone you want to connect from the phone list, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select SELECT, and press the ROTARY ENCODER. If another phone is already connected, turn the ROTARY ENCODER to select YES (disconnect) or NO (not dis- connect). Disconnection is completed when indi- cated DISCONNECTIN BLUETOOTH DEVICE is disappeared. Return to step 2, when disconnection is

completed.Connection is com- pleted when CONNECTED is displayed.

Connecting a Registered Bluetooth Audio Player

You can connect a registered Bluetooth audio player by the fol- lowing operation. 1 Turn the ROTARY ENCODER

to select LIST AUDIO, and press the ROTARY ENCODER.

Subsequent operation is the same as from Step 2 on in Connecting a Registered Bluetooth Mobile Phone.

Disconnecting a Bluetooth Mobile Phone You can disconnect a Bluetooth mobile phone by the following operation. 1 Turn the ROTARY ENCODER

to select LIST PHONE, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the phone you want to disconnect from the phone list, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select DISCONNECT, and press the ROTARY ENCODER.

4 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER. Disconnection is com- pleted when indicated DISCONNECTIN BLUETOOTH DEVICE is disappeared.

39

39

Disconnecting a Bluetooth Audio Player You can disconnect a Bluetooth audio player by the following operation. 1 Turn the ROTARY ENCODER

to select LIST AUDIO, and press the ROTARY ENCODER.

Subsequent operation is the same as from Step 2 on in Disconnecting a Bluetooth Mobile Phone.

Changing the Connection Method of the Bluetooth Audio Player

You can change the connection method of the Bluetooth audio player by the following operation. 1 Turn the ROTARY ENCODER

to select LIST AUDIO, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the audio player you want to change the connection method from the audio player list, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select CONNT METHOD, and press the ROTARY ENCODER.

4 Turn the ROTARY ENCODER and select FROM VEHICLE to make the connection from the unit or FROM AUDIO to make the connection from the audio player, and press the ROTARY ENCODER.Changing is com- pleted when the selected con- nection method is displayed.

Deleting a Registered Bluetooth Mobile Phone from the List

You can delete a registered Bluetooth mobile phone from the list by the following operation. 1 Turn the ROTARY ENCODER

to select LIST PHONE, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the phone you want to delete from the phone list, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select DELETE, and press the ROTARY ENCODER.

4 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER. Deletion is completed when DELETED is displayed.

Deleting a Registered Bluetooth Audio Player from the List

You can delete a registered Bluetooth audio player from the list by the following operation. 1 Turn the ROTARY ENCODER

to select LIST AUDIO, and press the ROTARY ENCODER.

Subsequent operation is the same as from Step 2 on in Deleting a Registered Mobile Phone from the List.

Setting a Passkey You can set the passkey. The passkey is a number consisting of between 4 and 8 digits. The default setting is 0000. You can enter the number at the flashing cursor position. 1 Turn the ROTARY ENCODER

to select SET PASSKEY, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select any number, and press the ROTARY ENCODER to the right to move the cursor to the next digit.

3 When you have input the last number, press the ROTARY ENCODER to store the pass- key.

40

40

Setting Automatic Connection of a Bluetooth Device

You can select whether or not a Bluetooth device is automati- cally connected when the ignition switch is set to ON. 1 Turn the ROTARY ENCODER

to select BT POWER ON (connect automatically) or BT POWER OFF (do not connect automatically), and press the ROTARY ENCODER.

Checking Device Information You can check the device name of this unit and the Bluetooth device address. 1 Turn the ROTARY ENCODER

to select BT INFO, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select DEVICE NAME or DEVICE ADDR (Bluetooth Device Address), and press the ROTARY ENCODER. You can check the selected information item.

Setting Connection Confirmation You can select whether or not to display the connection confirma- tion when the ignition switch is set to ON and a Bluetooth device is connected. 1 Turn the ROTARY ENCODER

to select DISPLAY ON (display) or DISPLAY OFF (hide), and press the ROTARY ENCODER.

Initializing Information You can initialize the hands-free phone settings (ring tone and volume), the settings information for this unit (Bluetooth Power, Bluetooth connection completion display and passkey) or all the set- tings information. 1 Turn the ROTARY ENCODER

to select INITIALIZE, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select SET HF SOUND (to initialize the tone settings for the hands-free phone), DEVICE INFO (to initialize the settings information for this unit) or ALL INITILZE (to initialize all the settings), and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select YES (initialize) or NO (do not initialize), and press the ROTARY ENCODER.

41

41

4

4

Listening to Bluetooth- Audio player

1 iPodUSB Switches to the BT-AUDIO mode.

2 RIGHT (TRACK ) Tasks can be performed when sup- ported by your Bluetooth device. Press to proceed to the next file. Press and hold until you hear a beep. Playing of the file is fast forwarded. (There is no sound.)

3 LEFT (TRACK ) Tasks can be performed when sup- ported by your Bluetooth device. Press to takes you back to the start of the file currently playing. Press to return to the previous file once more. Press and hold until you hear a beep. Playing of the file is reversed. (There is no sound.)

4 UP (ALBUM ) Tasks can be performed when sup- ported by your Bluetooth device. Press to proceed to the next folder.

43

43

5 DOWN (ALBUM ) Tasks can be performed when sup- ported by your Bluetooth device. Press to return to the previous album.

6 PRESET1(PLAY/PAUSE) Tasks can be performed when sup- ported by your Bluetooth device. To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.

7 PRESET5 (Random) Tasks can be performed when sup- ported by your Bluetooth device. If you press this, and is indi- cated in the display. This unit starts to play files in the folder being played in random order. Press again to cancel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play files in all folders on the disc being played in random order. Press again to cancel.

8 PRESET 6 (Repeat) Tasks can be performed when sup- ported by your Bluetooth device. If you press this, and is indi- cated in the display. This unit starts to repeat the file being played. Press again to cancel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to repeat the folder being played. Press again to cancel.

9 SCAN Tasks can be performed when sup- ported by your Bluetooth device. If you press this, and is indi- cated in the display. This unit starts to play the first 10 seconds of each file in the folder being played. Press again to cancel. If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play the first 10 seconds of the first file of each folder. Press again to cancel.

a TEXT Tasks can be performed when sup- ported by your Bluetooth device. Press and display indications change as follows: Upper: Artist Name Lower: Track Title

Track Title ELAPSED TIME

Album Title Track Title

If the profile of your Bluetooth device is AVRCP 1.0, the display cannot be switched. STREAMING AUDIO is displayed. When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis- played.

44

44

Phone Settings You can make the various settings for using the hands-free phone. To make the settings, display the PHONE menu by the following operation.

1 Press the ROTARY ENCODER to display the AUDIO menu.

2 Turn the ROTARY ENCODER to select PHONE, and press the ROTARY ENCODER.

Editing the Phonebook You can add contacts to or delete contacts from the phonebook in this unit. You can also delete the call histories or other phonebooks, and register numbers from the phonebook to speed dialing. To edit the phonebook, turn the ROTARY ENCODER to select PHONEBOOK, and press the ROTARY ENCODER to display the PHONEBOOK menu.

Adding a Contact You can transfer contacts indi- vidually or all together from a connected mobile phone to the phonebook in this unit. 1 Turn the ROTARY ENCODER

to select ADD CONTACTS, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select SEND ALL or SEND ONE, and press the ROTARY ENCODER.

3 Confirm the displayed amount of the memory remainder, and turn the ROTARY ENCODER to select YES (transfer) or NO (not transfer), and press the ROTARY ENCODER.

Transfer is completed when TRANSFERRED is dis- played.

Deleting a Contact You can delete individual contacts from the phonebook in this unit. 1 Turn the ROTARY ENCODER

to select DEL CONTACTS, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the contact name (or phone number) that you want to delete from the phone- book, and press the ROTARY ENCODER.

If you turn the ROTARY ENCODER to select A-Z SEARCH and press the ROTARY ENCODER, you can select the first letter of the contact name and narrow down the search. Select the first letter of the name from the alphabet (A to Z) or select OTHERS (numbers from 0 to 9 and symbols).

3 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Deletion is completed when DELETED is displayed.

45

45

Registering a Contact to Speed Dialing

You can register phone numbers from the phonebook in this unit to speed dialing. 1 Turn the ROTARY ENCODER

to select ADD SD, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the contact name (or phone number) you want to register to speed dialing and press the ROTARY ENCODER, and press PRESET 1 - 5.

If you turn the ROTARY ENCODER to select A-Z SEARCH and press the ROTARY ENCODER, you can select the first letter of the contact name and narrow down the search. Select the first letter of the name from the alphabet (A to Z) or select OTHERS (numbers from 0 to 9 and symbols).

3 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Registration to speed dial- ing is completed when REGISTERED is displayed.

Deleting a Phonebook Used With Another Phone

You can delete a phonebook used with another phone. 1 Turn the ROTARY ENCODER

to select DEL OTHER PB, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the name of the phone in which the phonebook you want to delete is used, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Deletion is completed when DELETED is displayed.

Deleting a Call History You can delete the call histories in this unit. 1 Turn the ROTARY ENCODER

to select DEL HISTORY, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the history type (ALL CALLS, MISSED CALLS, INCOMING CALLS or OUTGOING CALLS), and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select ALL DELETE or the individual history you want to delete, and press the ROTARY ENCODER.

4 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Deletion is completed when DELETED is displayed.

46

46

Deleting a Phone Number from Speed Dialing

You can delete any phone number from speed dialing. 1 Press the CALL, turn the

ROTARY ENCODER to select SPEED DIALS, and press the ROTARY ENCODER.

2 Press the PRESET button to which the phone number you want to delete is registered.

3 Check the phone number and press PRESET 6.

4 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Deletion is completed when DELETED is displayed.

Displaying a Call History You can display the call histories (incoming calls, outgoing calls, missed calls, last call or all calls). You can also select any history (without last call) and add it to or delete it from speed dialing. 1 In the TEL menu, turn the

ROTARY ENCODER to select INCOMING, OUTGOING, MISSED or ALL CALLS, and press the ROTARY ENCODER. When the TEL menu is dis- played, the number of the last call is displayed.

2 Turn the ROTARY ENCODER to select the history you want to display, and press the ROTARY ENCODER.

3 Check the phone number.

Registering a Call History to Speed Dialing

You can register the selected call history to speed dialing. The number of the last call, how- ever, cannot be registered to speed dialing. 1 Referring to Displaying a Call

History, display the history you want to register to speed dialing.

2 Turn the ROTARY ENCODER to select ADD SD, and press the ROTARY ENCODER.

3 Press PRESET 1 - 5 to register the selected call history you want to register to speed dial- ing.

Speed dial registration is com- pleted when REGISTERED is displayed.

Deleting a Call History You can delete the selected call history. 1 Referring to Displaying a Call

History, display the history you want to delete.

2 Turn the ROTARY ENCODER to select DELETE and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Deletion is completed when DELETED is displayed.

Setting the Hands-free Phone Ring Tone and Call Volume

You can select the ring tone for the hands-free phone and set the ring tone volume and call volume. The settings can only be made when a mobile phone is con- nected.

Selecting the Ring Tone You can select a ring tone for the hands-free phone. 1 Turn the ROTARY ENCODER

to select SET HF SOUND, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select RINGTONE, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select the ring tone you want to set from RINGTONE 1, RINGTONE 2 and RINGTONE 3, and press the ROTARY ENCODER.

* Depending on the type of mobile phone, when the mobile phone is set for the ring tone to sound on the con- nected unit, the set ring tone rings by the mobile phone even when not is even the connec- tion to this unit.

47

47

Setting the Call Volume You can set the call volume of the hands-free phone. 1 Turn the ROTARY ENCODER

to select SET HF SOUND, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select CALL VOL, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select the call volume you want to set, and press the ROTARY ENCODER.

You can set the call volume in the range of 2 to 63.

Setting the Ring Tone Volume You can set the ring tone volume of the hands-free phone. 1 Turn the ROTARY ENCODER

to select SET HF SOUND, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select RINGTONE VOL, and press the ROTARY ENCODER.

3 Turn the ROTARY ENCODER to select the ring tone volume you want to set, and press the ROTARY ENCODER.

You can set the ring tone vol- ume in the range of 2 to 63.

Transferring a Call History You can transfer a call history from the connected mobile phone to this unit. This function is only available when a mobile phone is connected. 1 Turn the ROTARY ENCODER

to select SEND HISTORY, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select YES, and press the ROTARY ENCODER.

Call history transfer is complet- ed when TRANSFERRED is displayed.

48

48

Using Hands-Free Phoning 1 CALL

Switches between telephone modes. Pressing CALL while a phone number is displayed initiates a call to the displayed number. Pressing CALL when there is an incoming call connects the caller. When you connect the cellular phone corresponding to the voice recognition feature, if you press and hold until you hear a beep, the voice recognition func- tion is activated. If you press CALL while talking on the mobile phone, it is switched to a hands- free telephone call with this unit. If you press CALL while talking with this unit, the telephone call is put on hold (Hold is only provided for the mobile phone connected to this unit). If you press CALL while talking with this unit, another incoming call can be answered (Taking incoming calls while talking on the mobile phone is only pro- vided when connected with this unit). If you press CALL again after receiving an additional incoming call, the call is switched back to the original caller.

2 END Returns to the operation prior to switch- ing to telephone mode. Pressing END when there is an incoming call blocks the caller.

CALL

49

49

3 PRESET 1-5 Initiates a call to the registered phone number.

4 PRESET 6 Mutes your voice and switches the phone function from this unit to your mobile phone.

5 TEXT If you press TEXT when there is information that cannot finish being displayed, you can see information on continuation.

Making a Call You can initiate a call from the phonebook, by speed dialing, entering the phone number or from the call histories.

Using the Phonebook You can make a call from the phonebook in this unit. 1 Press CALL, turn the

ROTARY ENCODER to select PHONEBOOK, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the desired contact name (or phone number) from the phonebook, and press the ROTARY ENCODER.

If you turn the ROTARY ENCODER to select A-Z SEARCH and press the ROTARY ENCODER, you can select the first letter of the contact name and narrow down the search. Select the first letter of the name from the alphabet (A to Z) or select OTHERS (numbers from 0 to 9 and symbols).

3 Check the phone number and press CALL.

Using Speed Dialing You can make a call from the phone numbers registered to speed dialing. 1 Press CALL, turn the ROTARY

ENCODER to select SPEED DIALS, and press the ROTARY ENCODER.

2 Press the PRESET button to which the phone number you want to call is registered.

3 Check the phone number and press CALL.

Using the Call Histories You can make a call by displaying the call histories (last call, outgo- ing calls, incoming calls, missed calls or all calls). 1 In the TEL menu, turn the

ROTARY ENCODER to select LAST NUMBER, INCOMIN CALL, OUTGOIN CALL, MISSED CALLS or ALL CALLS, and press the ROTARY ENCODER.

2 Turn the ROTARY ENCODER to select the history you want to display, and press the ROTARY ENCODER (except last call).

3 Check the phone number and press CALL.

50

50

Changing the Opening Screen With the main unit switched on after pressing the Power button, once the key is turned from the ACC position to the off position and back to ACC again, SCION is displayed as the Opening Screen. Users can edit the text themselves to make another Opening Screen, as an alternate to the default SCION display. Up to a maximum of 1 characters can be displayed. The procedure is described on next page.

51

51

Editing the Text The SETUP menu will be

displayed when ROTARY ENCODER is held down while the power is in OFF position. Turn the ROTARY ENCODER to select the OPENING. You can enter the character at the flashing cursor position. The character selection method is described below.

1 Enter the character to PRESET1, 2 and 3. Turn the ROTARY ENCODER right or left to select the character, and press the RIGHT or LEFT to move the cursor. PRESET1: Alphabet input (A-Z) PRESET2: Number PRESET3: Space, Deletion

2 After selecting the character, press the ROTARY ENCODER right. The cursor moves to the right, so you can edit the next character. (Maximum number of characters for entry is 12.)

To choose and delete the character or text, choose the character with the cursor and then press PRESET3 to delete.

3 After character entry, press the ROTARY ENCODER to register the text string. If the cursor is positioned on the 12th character, press the RIGHT to register the whole text entered.

New Message Display The next time the ACC is

switched on, the text edited by the user will be displayed.

NOTICE

To avoid draining the battery, do not leave the car audio on longer than necessary when the engine is not running.

5

5

Initial Setting To display the SETUP menu, press and hold the ROTARY ENCODER while the power is in "OFF" posi- tion. When the ROTARY ENCODER is turned, the setting item of the SETUP menu will switch in the fol- lowing order: SUB-W CTRL OPENING CAR TYPE

SUB-W CTRL: A menu for switching the sub- woofer ON and OFF when a sub- woofer is connected.

When switched to ON, you can hear the sound from the sub- woofer and enter the subwoofer settings on the AUDIO CTRL menu displayed by pressing the ROTARY ENCODER while the power is in ON position. When switched to OFF, no sound can be heard from the subwoofer. When the ROTARY ENCODER is pressed, switches in the following order: OFF ON

OPENING: A menu for editing the opening message. You can edit the opening message by the following operation. For details of how to edit the opening message, refer to page 50 Changing the Opening Screen. Move the cursor left and right

with the ROTARY ENCODER left or right.

Choose the text with the ROTARY ENCODER left or right.

Enter alphabet with PRESET 1. Enter numbers with PRESET 2. Enter spaces with PRESET 3. Set the text with the ROTARY

ENCODER in the center.

CAR TYPE: A menu for setting up the vehicle type. When the ROTARY ENCODER is pressed, switches in the following order: TC XB XD IQ

53

53

Connecting an external amplifier When you connect an external amplifier to RCA connectors, please install according to the amplifier manual.

Subwoofer output

CAUTION A standard speaker's input is rated 17.5 W input (largest 40 W input). When an amplifier is connected to the RCA output, make sure to change the speaker that corresponds to the output. If you connect to a standard speaker, this may cause to catch fire, emit smoke, or cause damage.

NOTICE

The output of an internal amplifier will not stop even when an external amplifier is connected the RCA out- put. When cutting off the inter- nal amplifier output cable, protect the cut surface to prevent short circuits. Subwoofer output of this unit is monaural. The output level cannot be adjusted with FADER/ BALANCE on the AUDIO CONTROL Menu. Beeps will not be audible if an external amplifier is connected to the Front output.

Using the Steering Controller In vehicles equipped with one, you can use the steering controller to operate this product.

Operation button names and functions.

g Volume buttons (+, *) Press + to raise the volume level. Press * to lower the volume level.

g Mode selection button (MODE) When power to this product is

OFF: Press the button and power switches ON.

When power to this product is ON: Each time you press the button the source* changes. If you continue pressing the button for an extended period, power to this product switches OFF. * The source switches in the follow- ing order: FM1 FM2 (SAT1) (SAT2) (SAT3) CD(MP3/WMA/AAC) (USB/iPod) (Bluetooth-Audio) (AUX) AM FM1

54

54

g Track/station selection button (a,b)

When listening to the radio: Press the button and the preset memory is recalled in order. If you continue pressing the button for an extended period, automatic station selection begins.

When listening to a CD: Press the button to select a track.

When listening to MP3/WMA/AAC: Press the button to select a file. Press and hold the button to select a folder.

When listening to the iPod: Press the button to select a track.

When listening to USB portable audio player/USB memory: Press the button to select a file. Press and hold the button to select a folder.

When listening to a XM broadcast: Press the button to recall preset channels in order.

When listening to Bluetooth audio player: Press the button to select a track. Press and hold the button to select an album.

MP3, WMA and AAC files

MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.

WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player.

AAC is short for Advanced Audio Coding and refers to an audio compression tech- nology standard.

With some applications used to encode WMA files, this unit may not operate cor- rectly.

With some applications used to encode WMA files, album names and other text information may not be correctly displayed.

This unit allows playback of MP3/WMA/AAC files on CD-ROM, CD-R, CD-RW discs and USB portable audio player/USB memory. Disc recordings compatible with level 1 and level 2 of ISO9660 and with the Romeo and Joliet file system can be played back.

MP3/WMA/AAC files are not compatible with packet write data transfer.

The maximum number of characters which can be displayed for a file name, including the extension (.mp3, .wma, .m4a), is 24, from the first character.

The maximum number of characters which can be displayed for a folder name is 24.

In case of files recorded according to the Romeo file system, only the first 24 char- acters can be displayed.

The folder selection sequence for playback and other operations becomes the writing sequence used by the writing software. For this reason, the expected sequence at the time of playback may not coincide with the actual playback sequence. However, there also is some writing software which permits setting of the playback order.

IMPORTANT

When naming an MP3/WMA/ AAC file, add the correspond- ing filename extension (.mp3, .wma, .m4a). This unit plays back files with the filename extension (.mp3, .wma, .m4a) as an MP3/WMA/ AAC file. To prevent noise and malfunctions, do not use these extensions for files other than MP3/WMA/AAC files.

55

55

MP3 additional information

Files are compatible with the ID3 Tag Ver. 1.0, 1.1, 2.2, 2.3 and 2.4 formats for display of album (disc title), track (track title), artist (track artist) and comments. Ver. 2.x of ID3 Tag is given priority when both Ver. 1.x and Ver. 2.x exist.

The emphasis function is valid only when MP3 files of 32 kHz, 44.1 kHz and 48 kHz frequencies are played back. (16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz sampling frequencies can be played back.)

There is no m3u playlist compatibility. There is no compatibility with the MP3i

(MP3 interactive) or mp3 PRO formats. The sound quality of MP3 files generally

becomes better with an increased bit rates. This unit can play recordings with bit rates from 8 kbps to 320 kbps, but in order to be able to enjoy sound of a certain quality, we recommend using only discs recorded with a bit rate of at least 128 kbps.

WMA additional information

This unit plays back WMA files encoded by Windows Media Player.

You can only play back WMA files in the frequencies 32 kHz, 44.1 kHz and 48 kHz.

The sound quality of WMA files generally becomes better with an increased bit rate. This unit can play recordings with bit rates from 48 kbps to 320 kbps (CBR) or from 48 kbps to 384 kbps (VBR), but in order to be able to enjoy sound of a certain quality, we recommend using discs recorded with a higher bit rate.

This unit doesn't support the following for- mats.

- Windows Media Audio 9 Professional (5.1ch)

- Windows Media Audio 9 Lossless - Windows Media Audio 9 Voice

AAC additional information

This unit plays back AAC files encoded by iTunes.

This unit plays back AAC files in the sam- pling frequencies 11.025 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz.

The sound quality of AAC files generally becomes better with an increased trans- mission rate. This unit can play recordings with transmission rates from 16kbps to 320kbps, but in order to be able to enjoy sound of a certain quality, we recommend using discs recorded with a higher trans- mission rate.

This unit doesn't support the following for- mat:

- Apple Lossless

56

56

About folders and MP3/ WMA/AAC files

An outline of a CD-ROM and USB port- able audio player/USB memory with MP3/WMA/AAC files on it is shown below. Subfolders are shown as folders in the folder currently selected.

001.mp3

(001.wma, 001.m4a)

010.mp3

(010.wma, 010.m4a)

021.mp3

(021.wma, 021.m4a)

030.mp3

(030.wma, 030.m4a)

011.mp3

(011.wma, 011.m4a)

020.mp3

(020.wma, 020.m4a)

First

level

Second

level

Third

level

001

(ROOT)

002

004

005

003

NOTES

This unit assigns folder number. The user can not assign folder numbers. MP3/WMA/AAC files in the USB portable audio player/ USB memory are played in the same order as they were copied to the USB portable audio player/USB memory. To specify the order in which files in the USB portable audio player/USB memory are played, we recommend the following method. 1 Using a personal computer,

add a number indicating the playback order in front of the file name, e.g. [001xxx.mp3] or [099yyy. wma].

Put the files into a folder. 3 Copy the folder to the USB

portable audio player/USB memory. Depending on the computer environment, it may not be possible to specify the order by this method.

It is not possible to check folders that do not include MP3/WMA/AAC files. (These folders will be skipped without displaying the folder number.) MP3/WMA/AAC files in up to 8 tiers of folders can be played back. However, there is a delay in the start of playback on discs and USB portable audio player/USB memory with numerous tiers. For this reason we recommend creating discs with no more than tiers. It is possible to play back up to 19 folders on one disc. It is possible to play back up to 55 folders on one USB portable audio player/ USB memory.

57

57

USB portable audio player/ USB memory compatibility

USB version: 2.0, 1.1 and 1.0 USB data transfer rate: full speed USB Class: MSC (Mass Storage Class) device Protocol: bulk File system: FAT32 and FAT16 Supply current: 500 mA

NOTES

Partitioned USB memory is not compatible with this unit. Depending on the kind of USB portable audio player/ USB memory you use, this unit may not recognize the USB audio player/USB memory or audio files may not be played back properly.

This unit can play back files in the USB portable audio player/USB memory that is USB Mass Storage Class. However, copyright protected files that are stored in above-mentioned USB devices cannot be played back. (If the iPod is connected to this unit, file playback condition depends on the iPod specifications.) You cannot connect a USB portable audio player/USB memory to this unit via a USB hub. Not all multimedia portable devices are compatible.

58

58

Terms Packet write

This is a general term for a method of writing on CD-R, etc. at the time required for a file, just as is done with files on floppy or hard discs.

Bit rate This expresses data volume per second, or bps (bits per second) units. The higher the rate, the more information is available to reproduce the sound. Using the same encoding method (such as MP3), the higher the rate, the better the sound.

Multi-session Multi-session is a recording method that allows additional data to be recorded later. When recording data on a CD-ROM, CD-R or CD- RW, etc., all data from beginning to end is treated as a single unit or session. Multi-session is a method of recording more than 2 sessions in one disc.

CD-DA CD-DA is an abbreviation of Compact Disc Digital Audio. It refers to the uncompressed format of regular CDs.

ID3 Tag This is a method of embedding track- related information in a MP3 file. This embedded information can include the track title, the artist's name, the album title, the music genre, the year of production, comments and other data. The contents can be freely edited using software with ID3 Tag editing functions. Although the tags are restricted to the number of characters, the information can be viewed when the track is played back.

ISO9660 format This is the international standard for the format logic of CD-ROM folders and files. For the ISO9660 format, there are regulations for the following two levels. Level 1: The file name is in 8.3 format (the name consists of up to 8 characters, half-byte English capital letters and half-byte numerals and the "_" sign, with a file-extension of three characters). Level 2: The file name can have up to 31 characters (including the separation mark "." and a file extension). Each folder contains less than 8 hierarchies. Extended formats Joliet: File names can have up to 64 characters. Romeo:

File names can have up to 128 characters.

m3u Playlists created using the "WINAMP" software have a playlist file extension (.m3u).

MP3 MP3 is short for MPEG1 & 2 Audio Layer3. It is an audio compression standard set by a working group (MPEG) of the ISO (International Standards Organization). MP3 is able to compress audio data to about 1/10 the level of a conventional disc.

WMA WMA is short for Windows MediaTM

Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later.

AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and MPEG4.

59

59

CD player and care Use only CDs that have either of the

two Compact Disc Digital Audio marks as shown below.

Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly.

Check all CDs for cracks, scratches or warping before playing. CDs that have cracks, scratches or are warped may not play properly. Do not use such discs.

Avoid touching the recorded (non-print- ed) surface when handling the disc.

Store discs in their cases when not in use.

Keep discs out of direct sunlight and do not expose the discs to high tem- peratures.

Do not attach labels, write on or apply chemicals to the surface of the discs.

To clean a CD, wipe the disc with a soft cloth outward from the center.

If the heater is used in cold weather, moisture may form on components inside the CD player. Condensation may cause the CD player to malfunc- tion. If you think that condensation is a problem, turn off the CD player for an hour or so to allow it to dry out and wipe any damp discs with a soft cloth to remove the moisture.

Road shocks may interrupt CD play- back.

Never put a label, tape or scratches on a disc. These will prevent the disc from being played.

CD-R and CD-RW discs When CD-R/CD-RW discs are used,

playback is possible only for discs which have been finalized.

It may not be possible to play back CD- R/CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratch- es or dirt on the disc, or dirt, condensa- tion, etc., on the lens of this unit.

Playback of discs recorded on a per- sonal computer may not be possible, depending on the application settings and the environment. Please record with the correct format. (For details, contact the manufacturer of the appli- cation.)

Playback of CD-R/CD-RW discs may become impossible in case of direct exposure to sunlight, high tempera- tures, or the storage conditions in the car.

Titles and other text information recorded on a CD-R/CD-RW disc may not be displayed by this unit (in the case of audio data (CD-DA)).

This unit conforms to the track skip function of the CD-R/CD-RW disc. The tracks containing the track skip infor- mation are skipped automatically (in case of audio data (CD-DA)).

If you insert a CD-RW disc into this unit, time to playback will be longer than when you insert a conventional CD or CD-R disc.

Read the precautions accompanying the CD-R/CD-RW discs before use.

Recordings on CD-R/CD-RW can not be played back using the DDCD (Double Density CD) system.

This unit will not play back SACD (Super Audio CD).

60

60

Error indications If the CD player does not work, the CD stops suddenly during playback, or a similar problem occurs, an error indication will appear on the display. The cause of the trouble will be indicated by an error number, and you should check the corresponding item shown in the table below.

CD CHECK When the disc is dirty or has been inserted upside-down. Check the disc.

ERROR 3 There is probably an electrical or mechanical fault in the CD player. Contact your Scion dealer and ask for repair.

ERROR 4 This appears when there is excess current flow. Contact your Scion dealer and ask for repair.

WAIT This appears when the CD player does not work because its temperature is high. Wait a short while until the vehicle temperature goes down.

NO SUPPORT This appears when an MP3/WMA/AAC file format is unusual and not supported by this unit like WAV format recordings. Please check the MP3/WMA/AAC file format.

DualDiscs DualDiscs are two-sided discs that

have a recordable CD for audio on one side and a recordable DVD for video on the other.

Since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this unit.

Frequent loading and ejecting of a DualDisc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a DualDisc may become stuck in the disc loading slot and will not eject. To prevent this, we recom- mend you refrain from using DualDisc with this unit.

Please refer to the information from the disc manufacturer for more detailed information about DualDiscs.

61

61

When problems occur while the iPod is connected to this unit, a message will appear on the display. Refer to the table below to identify the problem, then take the suggested corrective action.

ERROR 3 There is probably an electrical or mechanical fault in the iPod. Please check the iPod.

ERROR 4 This appears when there is excess current flow. Contact your Scion dealer and ask for repair.

ERROR 6 This appears when an iPod software version is unusual and not supported by this unit. Please check the iPod software version.

CONNECTION ERROR Communication failure. Disconnect the cable from the iPod. Once the iPod main menu appears in the iPod display, connect the cable again.

NO SONGS No songs. Transfer the songs to the iPod.

EMPTY There are no songs in the selected list. Select a list that contains songs.

STOP iPod has stopped. Select again from list or connect the iPod again. If the iPod freezes, reset and connect again.

IPOD ERROR This appears when an unsupported iPod is connected. Disconnect the device.

UPDATE This appears when the iPod is unusual and not compatible with this unit. Please check the iPod compatibility.

6

6

When problems occur with the USB portable audio player/USB memory is connected to this unit, a message will appear on the display. Refer to the table below to identify the problem, then take the suggested corrective action.

ERROR 3 There is probably an electrical or mechanical fault in the USB portable audio player/ USB memory. Please check the USB portable audio player/USB memory.

ERROR 4 This appears when there is excess current flow. Contact your Scion dealer and ask for repair.

ERROR 5 This appears when the USB portable audio player/USB memory is unusual and not compatible with this unit. Please check the USB portable audio player/USB memory compatibility.

NO SONGS This appears when an MP3/WMA/AAC file format is unusual and not supported by this unit like WAV format recordings. Please check the MP3/WMA/AAC file format.

CONNECTION ERROR Communication failure. Disconnect the USB portable audio player/USB memory and connect again.

USB ERROR This appears when an unsupported USB portable audio player/USB memory is con- nected. Disconnect the device.

63

63

When problems occur with the XM tuner, a message will appear on the display. Refer to the table below to iden- tify the problem, then take the suggested corrective action.

The XM Listener Care Center is also available on the phone, please call (800)-967-346 during the following hours: Mon - Sat: 8 AM - 11 PM EST Sun: 8 PM - 8 PM EST

CK ANTENNA The XM antenna is not connected. Check whether the XM antenna cable is attached securely.

A short-circuit occurring in the antenna or the surrounding antenna cable. Make sure that there is nothing unusual with the antenna or antenna cable.

NO SIGNAL XM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal.

LOADING Unit is acquiring audio or program information. Wait until the unit has received the information.

CH OFF AIR The channel you selected is not broadcasting any programming. Select another channel.

CH UNAUTH The unit is updating the encryption code. Wait until the update is finished.

CH UNAVAIL The unit is receiving a channel with no SID.

64

64

Changing or disconnecting your battery

About ASL setting

If the battery is changed or discon- nected, you cannot setup the ASL setup option until the vehicle is mov- ing.

Specifications General

Power source . . . . . . . . . . . . . 13. V DC (10.5 V to 16.0 V allowable) Grounding system . . . . Negative type Maximum current consumption . . 15 A Dimensions (W H D) . . . . . . . . . . . . . 05.5 104 179.6 mm (80 in.7/8 41 in. 70 in.3/4) Weight . . . . . . . . . . . . . . . . . . . . 1.76 kg (3.88016 lbs.)

Audio Tone controls (Bass) . . . . . . . . . . . Frequency : 80 Hz

Level : 10 dB (Treble) . . . . . . . . . . Frequency : 10 kHz

Level : 10 dB Maximum power output . . . . 40 W 4 Load impedance . . . . . . . . . . . . . . . . 4

CD Player System . . . Compact disc audio system Usable discs . . . . . . . . . . Compact disc Signal format Sampling frequency . . . . . . 44.1 kHz Number of quantization bits . . . . . . . . . . . . . . . . . . . . . . . . 16; linear Number of channels . . . . . . . (stereo) MP3 decoding format . . . . . . . . . . MPEG1 & Audio Layer 3 WMA decoding format . . . . . . Ver.7, 7.1, 8, 9, 10.11 (ch audio) (Windows Media Player)

AAC decoding format . . . iTunes 8. or less (extension .m4a)

USB Specification . . . . . . USB .0 full speed Supply current . . . . . . . . . . . . . . 500 mA Maximum amount of memory . . . 50 GB File system . . . . . . . . . . . FA

Manualsnet FAQs

If you want to find out how the iQ Toyota works, you can view and download the Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Toyota iQ as well as other Toyota manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Toyota iQ. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Toyota iQ Base Audio Headunit 2012 City Car Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.