Summary of Content for Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions PDF
1 All Rights Reserved
Printed in the USA
2001 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196
Solid Windshield Kit Workman 1100/2100 and Twister Utility Vehicle Model No. 07294 Model No. 07294R
Form No. 3326-472 Rev A
Note: To attach the Solid Windshield Kit, you must have a Canopy Kit (Model No. 07297 or 07297R) installed on your vehicle.
Assembly 1. Position the machine on a level surface. Set the
parking brake, turn the ignition off, and remove the key.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders.
Remove the key from the ignition switch before you do any maintenance.
2. Attach the windshield tube to the front support tubes on the canopy using 2 screws, flat washers, and capped nuts (Fig. 1).
Figure 1 1. Windshield tube 2. Screw and flat washer
3. Capped nut 4. Snap-on clip
3. Remove the protective film from the windshield.
4. Install the snap-on clips to windshield as shown in Figure 1.
5. Attach the snap-on clips on the side of the windshield to the canopy frame. Align the clips on the bottom of the windshield with the windshield tube and press the windshield securely into place (Fig. 1).
6. Ensure that all of the clips are secured firmly to the frame.
Remove the solid windshield before transporting the vehicle on a trailer.
Important To prevent degrading of the windshield or clips, clean the windshield with mild soap and water only. Do not use glass cleaners and solvents
If you want to find out how the Twister Toro works, you can view and download the Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions on the Manualsnet website.
Yes, we have the Installation Instructions for Toro Twister as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Installation Instructions should include all the details that are needed to use a Toro Twister. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Workman 2100 Twister 07294R Windshield Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.