Summary of Content for Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions PDF
Form No. 3355-106 Rev A
Replacement Pulley Kit For Z593-D Z Master Models 74264, 74264TE, 74265 and 74265TE Model No. 110-3944 Model No. 110-3945
This kit is for installing a DFS bagger onto a Z593D Z Master.
Note: Before removing the pulley, make sure the gearbox drive pulley does not have 4 holes around the center hole.
1 Replacing the Gearbox Drive Pulley
Parts needed for this step:
1 Pulley 1 Square key 2 Set screw
1. Remove the mower belt from the gearbox pulley assembly (Figure 1).
2. Remove the 2 set screws, square key, and gearbox pulley from the gearbox.
3. Install the bagger drive pulley to the new gearbox pulley with 3 bolts (3/8 x 1-3/4 inches), 3 spacers, and 3 ange nuts (3/8 inch) (Figure 1). This hardware is supplied with the bagger.
4. Install the gearbox pulley and bagger drive pulley to the gearbox with 2 set screws and a square key (Figure 1). The pulley center hub needs to be ush with the end of the gearbox shaft.
5. Install the mower belt back onto the gearbox pulley (Figure 1).
1. Gearbox 5. Spacer 2. Flange nut, 3/8 inch 6. Bagger drive pulley 3. Gearbox drive pulley 7. Bolt, 1/2 x 1-3/4 inch 4. Set screw
2006The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN) Printed in the USA. All Rights Reserved
If you want to find out how the Z593-D Toro works, you can view and download the Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions on the Manualsnet website.
Yes, we have the Installation Instructions for Toro Z593-D as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Installation Instructions should include all the details that are needed to use a Toro Z593-D. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Z593-D 74264 110-3945 Pulley Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.