Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions PDF

Form No. 3326-341

Muffler, Spark Arrester, and Air Deflector Kit

Part No. 105-1680, 105-1681, and 105-1682 Installation Instructions

Z-Master Traction Units

Important When finished installing the spark arrester, store this sheet with your traction unit Operators Manual for future reference.

Loose Parts Note: Use the chart below to identify parts for assembly.

Description Qty. Use

Muffler

Gasket

1

2 Installing the muffler

Spark arrester

Clamp

1

1 Installing the spark arrester

Air deflector

Bolt

Locknut

1

2

2

Installing the air deflector

Installing the Muffler 1. Stop the PTO, set the parking brake, stop the engine,

and remove the ignition key.

2. Allow the traction unit to cool completely.

3. Remove the muffler heat shield.

4. Remove the four nuts and lock washers securing the muffler to the studs on the engine.

5. Remove the old muffler and gaskets from the engine, ensuring that you clean all pieces of the gaskets off of the engine exhaust manifold.

6. Slide the new gaskets over the studs on the engine.

7. Install the new muffler on the studs on the engine, securing it tightly using the lock washers and nuts removed in step 4.

8. Install the muffler heat shield.

Installing the Spark Arrester 1. Slide the slotted end of the spark arrester over the

exhaust outlet on the muffler as far as possible by hand (Fig. 1).

Important Do not use a hammer or other instrument to pound the arrester onto the exhaust outlet. Pounding on the arrester will damage it.

2

1

3

2

Figure 1 1. Spark arrester 2. Muffler exhaust outlet

3. Clamp

2. Slide the clamp over the arrester until it is flush with the slotted end of the arrester so that the clamp covers the slots in the arrester (Fig. 1).

3. Tighten the clamp.

Installing the Air Deflector If your traction unit already has an air deflector installed (Fig. 2), ingnore this procedure and discard the air deflector shipped with the kit.

1. Stop the PTO, set the parking brake, stop the engine, and remove the ignition key.

2. Allow the traction unit to cool completely.

3. Place the air deflector above the lower flange on the frame behind the muffler (Fig. 2).

m5363

1 3

2

4

Figure 2 1. Frame 2. Air deflector

3. Bolt 4. Locknut

4. Secure the air deflector using the 2 bolts and lo

Manualsnet FAQs

If you want to find out how the Z Master Toro works, you can view and download the Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro Z Master as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro Z Master. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Z Master Z200 105-1680 Muffler Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.