Toro Titan 140-2067 Mount Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for Toro Titan 140-2067 Mount Installation Instructions PDF

Form No. 3436-885 Rev A Jack Mount Kit for Titan Riding Mowers Model No. 140-2067 Model No. 140-5124

Installation Instructions

Safety Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing.

decal127-6663

127-6663

1. Warningread the Operator's Manual.

2. Crushing hazardengage the parking brake, shut off the engine, and remove the key; support the machine using jackstands.

Installation Determine the left and right sides of the machine from the normal operating position. 1. Park the machine on a level surface,

disengage the blade-control switch, move the motion-control levers outward to the NEUTRAL position, and engage the parking brake.

2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving the operating position.

3. Secure the jack mount to the left front axle-tube using 2 U-bolts and 4 flange nuts (Figure 1).

g202309

Figure 1

1. U-bolt 3. Jack mount 2. Flange nut 4. Left front axle-tube

4. Torque the fasteners to 22.5 Nm (200 in-lb).

2019The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420

Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3436-885* A

Operation Using the Jack Mount

WARNING The machine could fall onto someone and cause serious injury or death. Do not keep the machine raised on the jack

for extended periods of time. Always use a jack on a level surface. Ensure that the jack is secured properly to

the jack mount using a jack pin. Do not rely solely on the jack for support.

Use adequate jack stands or equivalent support.

Do not mount or dismount the mower while the jack is raised.

Before each use, ensure that the jack and jack mount work properly and that there are no signs of damage.

Note: Use only a manufacturer-approved jack rated at 907 kg (2,000 lb) or higher lift capacity with the jack mount. 1. Park the machine on a level surface,

disengage the blade-control switch, move the motion-control levers outward to the NEUTRAL position, and engage the parking brake.

2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving the operating position.

3. Attach the jack to the jack mount with a jack pin (Figure 2).

g202641

Figure 2

1. Jack mount 3. Jack tube 2. Jack pin 4. Jack

4. Use the jack to raise the machine to the desired height.

WARNING Raising the machine could cause a fuel leak. Fuel is extremely flammable and highly explosive. Check for any fuel leaks before

performing maintenance. If you see a fuel leak, immediately

lower the machine, drain the fuel, and wipe up the spill.

<

Manualsnet FAQs

If you want to find out how the Titan Toro works, you can view and download the Toro Titan 140-2067 Mount Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro Titan as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro Titan. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro Titan 140-2067 Mount Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro Titan 140-2067 Mount Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro Titan 140-2067 Mount Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro Titan 140-2067 Mount Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Titan 140-2067 Mount Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.