Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions PDF

Download download
Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions PDF
Toro Manual Toro Canopy Kit Manual Toro Twister Manual Toro Workman 1100 Manual Toro 07297R Manual Toro Canopy Kit Installation Instructions
Pages 2
Year 2001
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions PDF

Page 1

1

All Rights Reserved

Printed in the USA

2001 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Canopy Kit Workman 1100/2100 and Twister Utility Vehicle Model No. 07297 Model No. 07297R

Form No. 3326-769 Rev B

Installation Instructions

Safety and Instruction Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost.

104-6731

Assembly 1. Position the machine on a level surface. Set the parking

brake, turn the ignition off, and remove the key.

If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders.

Remove the key from the ignition switch before you do any maintenance.

Caution

2. If your vehicle has a Roll Over Protection System (ROPS), proceed to step 3. If your vehicle does not have a ROPS, proceed as follows:

A. Loosely attach the support brackets to the rear support tube with 8 screws, 4 (5/16 x 2-3/4 in.) and 4 (5/16 x 1-3/4 in.); 16 flat washers (5/16 in.); and 8 flange nuts (5/16 in.) (Fig. 1).

B. Loosely attach the support brackets to the vehicle with 8 screws (5/16 x 1 in.), 16 flat washers (5/16 in.), and 8 flange nuts (5/16 in.) (Fig. 1).

3. Remove the rear bolt that holds the front fender to the dash and front frame support on each side of the vehicle. Do not remove the fenders from the vehicle (Fig. 1).

1

2 3

4

5

6

7

8

9

Figure 1 1. Rear support tube 2. Left-hand support bracket 3. Screw, 5/16 x 2-3/4 in.,

and washer, 5/16 in. 4. Screw, 5/16 x 1-3/4 in.,

and washer, 5/16 in. 5. Flange nut and washer,

5/16 in.

6. Screw, 5/16 x 1 in,. and washer, 5/16 in.

7. Left-hand front fender 8. Right-hand front support 9. Left-hand front support

Page 2

2

4. Slide the slotted bracket on the front support between the fender and vehicle. Loosely attach the front supports to the floor of the vehicle using the existing hardware on the vehicle (Fig. 1).

5. Secure the fenders with the bolts removed in step 3.

6. Loosely attach the canopy to the front supports using 4 long screws (5/16 x 2-3/4 in.), 8 flat washers (5/16 in.), and 4 flange nuts (5/16 in.) (Fig. 2).

Note: The canopy support is already loosely attached to the canopy (Fig. 2).

6

1

2

3

4

5

5

Figure 2 1. Canopy 2. Right-hand front support 3. Left-hand front support 4. Screw, 5/16 x 2-3/4 in.,

and washer, 5/16 in.

5. Flange nut and washer, 5/16 in.

6. Canopy support

7. If your vehicle has a ROPS, insert the clinch nuts into the holes in the ROPS (Fig. 3). Lift the canopy and attach it to the ROPS with 2 screws (3/8 x 1 in.) and 2 flat washers (3/8 in.) (Fig. 3). If your vehicle does not have a ROPS, lift the canopy assembly and attach it to the rear support tube with 2 screws (5/16 x 2 in.), 4 washers (5/16 in.), and 2 flange nuts (5/16 in.) (Fig. 4).

1

3

4

2

Figure 3

Vehicle with ROPS

1. ROPS 2. Clinch nut 3. Canopy

4. Screw, 3/8 x 1 in., and washer 3/8 in.

12 3

4

Figure 4

Vehicle without ROPS

1. Rear support tube 2. Canopy 3. Screw, 5/16 x 2 in., and

washer, 5/16 in.

4. Flange nut and washer, 5/16 in.

Manualsnet FAQs

If you want to find out how the Twister Toro works, you can view and download the Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro Twister as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro Twister. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Workman 1100 Twister 07297R Canopy Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.