Contents

Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions PDF

Form No. 3395-693 Rev A Blade Kit Model 02601/02605 HoverPro 450/550 Machine Model No. 111-6800 Model No. 111-6801

Installation Instructions

Installation Loose Parts Use the chart below to verify that all parts have been shipped.

Procedure Description Qty. Use Up stop bracket 1 Insert (M4) 21 Screw (M4) 2

Install the up stop bracket.

Blade bolt 12 Blade 1 Install the blade.

Important: This kit is intended for use on HoverPro models 02601 and 02605 only.

1 Installing the Up-Stop Bracket

Parts needed for this procedure: 1 Up stop bracket

2 Insert (M4)

2 Screw (M4)

Procedure 1. Turn the fuel switch to the Off position.

2. Disconnect the wire from the spark plug

3. Tilt the machine on its left side to gain access under the deck.

4. Gently tap the inserts (M4) into the 2 holes in the deck as shown in Figure 1.

Figure 1

1. Inserts (M4) 3. Up stop bracket 2. Screws (M4)

5. Position the up-stop bracket on the top of the deck as shown in Figure 1 and secure it in place with 2 screws (M4).

2015The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420

Register at www.Toro.com. Original Instructions (EN) Printed in the UK.

All Rights Reserved *3395-693* A

2 Installing the Blade

Parts needed for this procedure: 1 Blade bolt

1 Blade

Procedure

WARNING The blade is sharp; contacting the blade can result in serious personal injury.

Disconnect the wire from the spark plug.

Wear gloves when handling the blade.

1. Remove the bolt, retaining bolt, and spacers to gain access to the blade carrier assembly.

2. Retain the spacers, and discard the blade carrier assembly and the bolt.

3. Install the blade using the supplied blade bolt and the retained spacers and retaining bolt as shown in Figure 2. Refer to the Operators Manual for height adjustment procedure.

Important: Position the curved ends of the

Manualsnet FAQs

If you want to find out how the HoverPro 550 Toro works, you can view and download the Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro HoverPro 550 as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro HoverPro 550. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro HoverPro 550 02605 111-6801 Blade Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.