Toro Z Master Series 100-3295 Baffle Kit Installation Instructions PDF

Download download
Toro Z Master Series 100-3295 Baffle Kit Installation Instructions PDF
Toro Manual Toro Baffle Kit Manual Toro Z Master Series Manual Toro 100-3295 Manual Toro Baffle Kit Installation Instructions
Pages 2
Year 1999
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Toro Z Master Series 100-3295 Baffle Kit Installation Instructions PDF

Page 1

The Toro Company 1999 Printed in USA All Rights Reserved

FORM NO. 3323-175

INSTALLATION INSTRUCTIONS

Part No. 1003295

44 Blowout Baffle Kit

Loose Parts

Note: Use the chart below to identify parts for assembly.

DESCRIPTION QTY. USE

Left Baffle

Right Baffle

Tapping Screw

1

1

9

Install Blowout Baffles

PreInstallation

POTENTIAL HAZARD Blade is sharp.

WHAT CAN HAPPEN Contact with sharp blade can cause serious

personal injury.

HOW TO AVOID THE HAZARD Wear gloves or wrap sharp edges of the

blade with a rag.

1. Disengage the power take off (PTO), set the parking brake, and turn the ignition key to OFF to stop the engine. Remove the key.

2. Remove belt covers from mower deck.

3. Remove mower unit (see Operators Manual for instructions).

4. Tip mower deck upside down and block up ends to ease installation of baffle components.

5. Thoroughly clean mower deck. All debris must be removed to ensure baffle will fit properly against mower deck.

6. Repair all bent or damaged areas of mower deck and replace any missing parts.

Page 2

Installation Instructions

2

Installing Blowout Baffles

Note: All holes for installing Blowout baffles need to be drilled (Fig. 1).

1. Place baffles as shown in figure 1.

Note: The baffle edges need to be centered between front roller brackets. The baffle corners must be flush to edge of deck (Fig. 1).

2. Position lefthand baffle with the outer corner flush to edge of deck and centered in the middle (Fig. 1).

3. Position righthand baffle with the straight edge parallel to edge of deck and centered in the middle (Fig. 1).

4. Using the baffles as a template mark locations of holes. Drill (9) 7/32 holes at the marked locations in the mower.

5. Install tapping screws and tighten securely (Fig. 1).

6. Rotate blades to ensure the blades do not hit the blowout baffles.

7. If the blades touch the blowout baffles repeat the steps in this section.

8. Turn deck over, reinstall deck and deck covers.

31 2 79 4

8 56 1011

Figure 1

1. Baffles Centered between brackets

2. Righthand Baffle 3. Straight Edge parallel to

deck edge 4. Lefthand Baffle 5. Corners flush to deck

edge

6. Nine Holes to Drill 7. Tapping Screw 8. Front Roller Brackets 9. Corner flush to deck edge 10. Side discharge 11. Front edge of deck

POTENTIAL HAZARD A blade that is bent or damaged could

break apart and pieces could be thrown at bystanders or at you as you use the mower.

WHAT CAN HAPPEN Pieces of blade that may be thrown could

seriously injure or kill you or bystanders.

HOW TO AVOID THE HAZARD Always replace bent or damaged blade with

a new blade. Never file or create sharp not

Manualsnet FAQs

If you want to find out how the Z Master Series Toro works, you can view and download the Toro Z Master Series 100-3295 Baffle Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro Z Master Series as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro Z Master Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro Z Master Series 100-3295 Baffle Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro Z Master Series 100-3295 Baffle Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro Z Master Series 100-3295 Baffle Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro Z Master Series 100-3295 Baffle Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro Z Master Series 100-3295 Baffle Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.