Contents

Toro RT1200 25427E Alarm Kit Installation Instructions PDF

1 of 4
1 of 4

Summary of Content for Toro RT1200 25427E Alarm Kit Installation Instructions PDF

Form No. 3394-785 Rev A Back-Up Alarm Kit RT1200 Trencher Model No. 25427 Model No. 25427E

Installation Instructions

Note: Install software revision G or higher before installing this kit. Refer to your Authorized Toro Dealer for the software update.

WARNING CALIFORNIA

Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to

cause cancer, birth defects, or reproductive harm.

Installation Loose Parts Use the chart below to verify that all parts have been shipped.

Description Qty. Use Bracket 1 Alarm 1 Bolt (M6-1x20) 2 Nut (M6-1) 2

Install the alarm.

Wire harness 1 Cable ties 6 Install the wire harness.

No parts required Check the alarm.

2015The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420

Register at www.Toro.com. Original Instructions (EN) Printed in the USA. All Rights Reserved *3394-785* A

Installing the Alarm 1. Remove the existing bolts from the back of the

machine (Figure 1).

2. Install the alarm to the bracket with 2 bolts (M6-1 x 20) and 2 nuts (M6-1) (Figure 1).

3. Apply thread-locking compound onto the existing bolts (Figure 1).

4. Install the bracket to the rear of the machine with the existing bolts (Figure 1).

g028939

Figure 1

1. Bracket 5. Existing bolts 2. Alarm 6. Bolt (M6-1x20) 3. Nut (M6-1) 7. Wire harness 4. Left rear of the machine

Installing the Wire Harness 1. Remove the four bolts securing the kick plate to the

frame and remove the plate (Figure 2)

Figure 2

1. Kick plate

2. Remove the four bolts securing the foot plate to the frame and remove the plate (Figure 3).

Figure 3

1. Foot plate

3. Install the wire harness to the alarm (Figure 1).

4. Route the harness under the cab and up to the area under the steering column (Figure 4).

2

g025945

Figure 4

1. Route the wire harness under the cab

2. Use the cable ties to secure the harness

5. Install the harness connectors to the main harness (Figure 5).

Note: One connector in the wire harness is not used for this kit (Figure 5).

Figure 5

1. Connectors 2. This connector is not used for this kit.

6. Secure the harness under the cab to the main harness with the cable ties.

7. Install the kick plate and foot plate.

Checking the Alarm Check and ensure the alarm is working by turning the

ignition key to on (do not start the machine) and push the traction pedal to the reverse position.

With the ignition key on, m

Manualsnet FAQs

If you want to find out how the RT1200 Toro works, you can view and download the Toro RT1200 25427E Alarm Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Toro RT1200 as well as other Toro manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Toro RT1200. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Toro RT1200 25427E Alarm Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Toro RT1200 25427E Alarm Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Toro RT1200 25427E Alarm Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Toro RT1200 25427E Alarm Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Toro RT1200 25427E Alarm Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.