TC Electronic Clarity M Quick Start Guide PDF

1 of 21
1 of 21

Summary of Content for TC Electronic Clarity M Quick Start Guide PDF

Quick Start Guide

CLARITY M / CLARITY M STEREO

Desktop Audio Meter with 7" High Resolution Display and USB Connection for Plug-In Metering

V 1.0

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock.

Use only high-quality professional speaker cables with " TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the

enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the

accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to qualified personnel.

Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and

moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution These service instructions are for use by qualified service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Use only attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product

should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

18. Do not install in a confined space, such as a book case or similar unit.

19. Do not place naked flame sources, such as lighted candles, on the apparatus.

20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

21. This apparatus may be used in tropical and moderate climates up to 45C.

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 All rights reserved.

For the applicable warranty terms and conditions and additional information regarding Music Tribes Limited Warranty, please see complete details online at musictribe.com/warranty.

Important Safety Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

Las terminales marcadas con este smbolo transportan corriente elctrica de magnitud suficiente como para constituir

un riesgo de descarga elctrica. Utilice solo cables de altavoz profesionales y de alta calidad con conectores TS de 6,3 mm o de bayoneta prefijados. Cualquier otra instalacin o modificacin debe ser realizada nicamente por un tcnico cualificado.

Este smbolo, siempre que aparece, le advierte de la presencia de voltaje peligroso sin aislar dentro de la caja;

este voltaje puede ser suficiente para constituir un riesgo de descarga.

Este smbolo, siempre que aparece, le advierte sobre instrucciones operativas y de mantenimiento que aparecen en la

documentacin adjunta. Por favor, lea el manual.

Atencin Para reducir el riesgo de descarga elctrica, no quite la tapa (o la parte

posterior). No hay piezas en el interior del equipo que puedan ser reparadas por el usuario. Si es necesario, pngase en contacto con personal cualificado.

Atencin Para reducir el riesgo de incendio o descarga elctrica, no exponga este

aparato a la lluvia, humedad o alguna otra fuente que pueda salpicar o derramar algn lquido sobre el aparato. No coloque ningn tipo de recipiente para lquidos sobre el aparato.

Atencin Las instrucciones de servicio deben llevarlas a cabo exclusivamente personal

cualificado. Para evitar el riesgo de una descarga elctrica, no realice reparaciones que no se encuentren descritas en el manual de operaciones. Las reparaciones deben ser realizadas exclusivamente por personal cualificado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atencin a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un pao seco.

7. No bloquee las aberturas de ventilacin. Instale el equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor tales como radiadores, acumuladores de calor, estufas u otros aparatos (incluyendo amplificadores) que puedan producir calor.

9. No elimine o deshabilite nunca la conexin a tierra del aparato o del cable de alimentacin de corriente. Un enchufe polarizado tiene dos polos, uno de los cuales tiene un contacto ms ancho que el otro. Una clavija con puesta a tierra dispone de tres contactos: dos polos y la puesta a tierra. El contacto ancho y el tercer contacto, respectivamente, son los que garantizan una mayor seguridad. Si el enchufe suministrado con el equipo no concuerda con la toma de corriente, consulte con un electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energa de manera que no pueda ser pisado y que est protegido de objetos afilados. Asegrese de que el cable de suministro de energa est protegido, especialmente en la zona de la clavija y en el punto donde sale del aparato.

11. Use nicamente los dispositivos o accesorios especificados por el fabricante.

12. Use nicamente la carretilla, plataforma, trpode, soporte o mesa especificados por el fabricante o suministrados junto con el equipo. Al transportar el equipo, tenga cuidado para evitar

daos y cadas al tropezar con algn obstculo.

13. Desenchufe el equipo durante tormentas o si no va a utilizarlo durante un periodo largo.

14. Confe las reparaciones nicamente a servicios tcnicos cualificados. La unidad requiere mantenimiento siempre que haya sufrido algn dao, si el cable de suministro de energa o el enchufe presentaran daos, se hubiera derramado un lquido o hubieran cado objetos dentro del equipo, si el aparato hubiera estado expuesto a la humedad o la lluvia, si ha dejado de funcionar de manera normal o si ha sufrido algn golpe o cada.

15. Al conectar la unidad a la toma de corriente elctrica asegrese de que la conexin disponga de una unin a tierra.

16. Si el enchufe o conector de red sirve como nico medio de desconexin, ste debe ser accesible fcilmente.

17. Cmo debe deshacerse de este aparato: Este smbolo indica que este aparato no debe ser tratado como basura orgnica, segn lo indicado en la Directiva WEEE (2012/19/EU) y a las normativas aplicables en su pas.

En lugar de ello deber llevarlo al punto limpio ms cercano para el reciclaje de sus elementos elctricos / electrnicos (EEE). Al hacer esto estar ayudando a prevenir las posibles consecuencias negativas para el medio ambiente y la salud que podran ser provocadas por una gestin inadecuada de este tipo de aparatos. Adems, el reciclaje de materiales ayudar a conservar

los recursos naturales. Para ms informacin acerca del reciclaje de este aparato, pngase en contacto con el Ayuntamiento de su ciudad o con el punto limpio local.

18. No instale esta unidad en un espacio muy reducido, tal como encastrada en una librera o similar.

19. No coloque objetos con llama, como una vela encendida, sobre este aparato.

20. Tenga presentes todas las advertencias relativas al reciclaje y correcta eliminacin de las pilas. Las pilas deben ser siempre eliminadas en un punto limpio y nunca con el resto de la basura orgnica.

21. Puede usar este aparato en lugares con climas tropicales y moderados que soporten temperaturas de hasta 45C.

Music Tribe no admite ningn tipo de responsabilidad por cualquier dao o prdida que pudiera sufrir cualquier persona por confiar total o parcialmente en la descripciones, fotografas o afirmaciones contenidas en este documento. Las especificaciones tcnicas, imgenes y otras informaciones contenidas en este documento estn sujetas a modificaciones sin previo aviso. Todas las marcas comerciales que aparecen aqu son propiedad de sus respectivos dueos. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone y Coolaudio son marcas comerciales o marcas registradas de Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Reservados todos los derechos.

Si quiere conocer los detalles y condiciones aplicables de la garanta as como informacin adicional sobre la Garanta limitada de Music Tribe, consulte online toda la informacin en la web musictribe.com/warranty.

Instrucciones de seguridad

NEGACIN LEGAL

GARANTA LIMITADA

2 3Quick Start GuideCLARITY M/CLARITY M STEREO

Les points reprs par ce symbole portent une tension lectrique suffisante pour constituer un risque dlectrocution.

Utilisez uniquement des cbles denceintes professionnels de haute qualit avec fiches Jack mono 6,35 mm ou fiches verrouillages dj installes. Toute autre installation ou modification doit tre effectue uniquement par un personnel qualifi.

Ce symbole avertit de la prsence dune tension dangereuse et non isole lintrieur de lappareil - elle peut

provoquer des chocs lectriques.

Attention Ce symbol signale les consignes dutilisation et dentre ! Tien importantes

dans la documentation fournie. Lisez les consignes de scurit du manuel dutilisation de lappareil.

Attention Pour viter tout risque de choc lectrique, ne pas ouvrir le capot de lappareil ni

dmonter le panneau arrire. Lintrieur de lappareil ne possde aucun lment rparable par lutilisateur. Laisser toute rparation un professionnel qualifi.

Attention Pour rduire les risques de feu et de choc lectrique, nexposez pas cet appareil la

pluie, la moisissure, aux gouttes ou aux claboussures. Ne posez pas de rcipient contenant un liquide sur lappareil (un vase par exemple).

Attention Ces consignes de scurit et dentretien sont destines un personnel qualifi.

Pour viter tout risque de choc lectrique, neffectuez aucune rparation sur lappareil qui ne soit dcrite par le manuel dutilisation. Les ventuelles rparations doivent tre effectues uniquement par un technicien spcialis.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes dutilisation.

5. Nutilisez jamais lappareil proximit dun liquide.

6. Nettoyez lappareil avec un chiffon sec.

7. Veillez ne pas empcher la bonne ventilation de lappareil via ses oues de ventilation. Respectez les consignes du fabricant concernant linstallation de lappareil.

8. Ne placez pas lappareil proximit dune source de chaleur telle quun chauffage, une cuisinire ou tout appareil dgageant de la chaleur (y compris un ampli de puissance).

9. Ne supprimez jamais la scurit des prises bipolaires ou des prises terre. Les prises bipolaires possdent deux contacts de largeur diffrente. Le plus large est le contact de scurit. Les prises terre possdent deux contacts plus une mise la terre servant de scurit. Si la prise du bloc dalimentation ou du cordon dali-mentation fourni ne correspond pas celles de votre installation lectrique, faites appel un lectricien pour effectuer le changement de prise.

10. Installez le cordon dalimentation de telle faon que personne ne puisse marcher dessus et quil soit protg dartes coupantes. Assurez-vous que le cordon dalimentation est suffisamment protg, notamment au niveau de sa prise lectrique et de lendroit o il est reli lappareil; cela est galement valable pour une ventuelle rallonge lectrique.

11. Utilisez exclusivement des accessoires et des appareils supplmentaires recommands par le fabricant.

12. Utilisez exclusivement des chariots, des diables, des prsentoirs, des pieds et des surfaces de travail recommands par le fabricant ou livrs avec le produit.

Dplacez prcautionneusement tout chariot ou diable charg pour viter dventuelles blessures en cas de chute.

13. Dbranchez lappareil de la tension secteur en cas dorage ou si lappareil reste inutilis pendant une longue priode de temps.

14. Les travaux dentretien de lappareil doivent tre effectus uniquement par du personnel qualifi. Aucun entretien nest ncessaire sauf si lappareil est endommag de quelque faon que ce soit (dommages sur le cordon dalimentation ou la prise par exemple), si un liquide ou un objet a pntr lintrieur du chssis, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas correctement ou la suite dune chute.

15. Lappareil doit tre connect une prise secteur dote dune protection par mise la terre.

16. La prise lectrique ou la prise IEC de tout appareil dnu de bouton marche/arrt doit rester accessible en permanence.

17. Mise au rebut approprie de ce produit: Ce symbole indique quen accord avec la directive DEEE (2012/19/EU) et les lois en vigueur dans votre pays, ce produit ne doit pas tre jet avec les dchets mnagers. Ce produit doit tre

dpos dans un point de collecte agr pour le recyclage des dchets dquipements lectriques et lectroniques (EEE). Une mauvaise manipulation de ce type de dchets pourrait avoir un impact ngatif sur lenvironnement et la sant cause des substances potentiellement

dangereuses gnralement associes ces quipements. En mme temps, votre coopration dans la mise au rebut de ce produit contribuera lutilisation efficace des ressources naturelles. Pour plus dinformations sur lendroit o vous pouvez dposer vos dchets dquipements pour le recyclage, veuillez contacter votre mairie ou votre centre local de collecte des dchets.

18. Ninstallez pas lappareil dans un espace confin tel quune bibliothque ou meuble similaire.

19. Ne placez jamais dobjets enflamms, tels que des bougies allumes, sur lappareil.

20. Gardez lesprit limpact environnemental lorsque vous mettez des piles au rebus. Les piles uses doivent tre dposes dans un point de collecte adapt.

21. Cet appareil peut tre utilis sous un climat tropical ou modr avec des tempratures de 45C maximum.

Music Tribe ne peut tre tenu pour responsable pour toute perte pouvant tre subie par toute personne se fiant en partie ou en totalit toute description, photographie ou affirmation contenue dans ce document. Les caractristiques, lapparence et dautres informations peuvent faire lobjet de modifications sans notification. Toutes les marques appartiennent leurs propritaires respectifs. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone et Coolaudio sont des marques ou marques dposes de Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Tous droits rservs.

Pour connatre les termes et conditions de garantie applicables, ainsi que les informations supplmentaires et dtailles sur la Garantie Limite de Music Tribe, consultez le site Internet musictribe.com/warranty.

Consignes de scurit

DNI LGAL

GARANTIE LIMITE

Vorsicht Die mit dem Symbol markierten Anschlsse fhren so viel Spannung,

dass die Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, professionelle Lautsprecherkabel mit vorinstallierten 6,35 mm MONO-Klinkensteckern oder Lautsprecherstecker mit Drehverriegelung. Alle anderen Installationen oder Modifikationen sollten nur von qualifiziertem Fachpersonal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Stromschlag auszuschlieen, darf die Gerteabdeckung

bzw. Gerterckwand nicht abgenommen werden. Im Innern des Gerts befinden sich keine vom Benutzer reparierbaren Teile. Reparaturarbeiten drfen nur von qualifiziertem Personal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Feuer bzw. Stromschlag auszuschlieen, darf dieses

Gert weder Regen oder Feuchtigkeit ausgesetzt werden noch sollten Spritzwasser oder tropfende Flssigkeiten in das Gert gelangen knnen. Stellen Sie keine mit Flssigkeit gefllten Gegenstnde, wie z. B. Vasen, auf das Gert.

Achtung Die Service-Hinweise sind nur durch qualifiziertes Personal zu befolgen.

Um eine Gefhrdung durch Stromschlag zu vermeiden, fhren Sie bitte keinerlei Reparaturen an dem Gert durch, die nicht in der Bedienungsanleitung beschrieben sind. Reparaturen sind nur von qualifiziertem Fachpersonal durchzufhren.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alle Warnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gert nicht in der Nhe von Wasser.

6. Reinigen Sie das Gert mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belftungsschlitze. Beachten Sie beim Einbau des Gertes die Herstellerhinweise.

8. Stellen Sie das Gert nicht in der Nhe von Wrmequellen auf. Solche Wrmequellen sind z. B. Heizkrper, Herde oder andere Wrme erzeugende Gerte (auch Verstrker).

9. Entfernen Sie in keinem Fall die Sicherheitsvorrichtung von Zweipol- oder geerdeten Steckern. Ein Zweipolstecker hat zwei unterschiedlich breite Steckkontakte. Ein geerdeter Stecker hat zwei Steckkontakte und einen dritten Erdungskontakt. Der breitere Steckkontakt oder der zustzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das mitgelieferte Steckerformat nicht zu Ihrer Steckdose passt, wenden Sie sich bitte an einen Elektriker, damit die Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor Tritten und scharfen Kanten geschtzt ist und nicht beschdigt werden kann. Achten Sie bitte insbesondere im Bereich der Stecker, Verlngerungskabel und an der Stelle, an der das Netzkabel das Gert verlsst, auf ausreichenden Schutz.

11. Das Gert muss jederzeit mit intaktem Schutzleiter an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine Gertesteckdose die Funktionseinheit zum Abschalten sein, muss diese immer zugnglich sein.

13. Verwenden Sie nur Zusatzgerte/Zubehrteile, die laut Hersteller geeignet sind.

14. Verwenden Sie nur Wagen, Standvorrichtungen, Stative, Halter oder Tische, die vom Hersteller benannt oder im Lieferumfang des Gerts enthalten sind. Falls Sie einen

Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen- Gertkombination, um Verletzungen durch Stolpern zu vermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn Sie das Gert lngere Zeit nicht benutzen.

16. Lassen Sie alle Wartungsarbeiten nur von qualifiziertem Service-Personal ausfhren. Eine Wartung ist notwendig, wenn das Gert in irgendeiner Weise beschdigt wurde (z. B. Beschdigung des Netzkabels oder Steckers), Gegenstnde oder Flssigkeit in das Gerteinnere gelangt sind, das Gert Regen oder Feuchtigkeit ausgesetzt wurde, das Gert nicht ordnungsgem funktioniert oder auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses Produkts: Dieses Symbol weist darauf hin, das Produkt entsprechend der WEEE Direktive (2012/19/EU) und der jeweiligen nationalen Gesetze nicht zusammen mit

Ihren Haushaltsabfllen zu entsorgen. Dieses Produkt sollte bei einer autorisierten Sammelstelle fr Recycling elektrischer und elektronischer Gerte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, die generell mit elektrischen und elektronischen Gerten in Verbindung stehen, knnte eine unsachgeme Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewhrleistet Ihr Beitrag zur richtigen Entsorgung dieses Produkts die effektive Nutzung natrlicher Ressourcen. Fr weitere Informationen zur Entsorgung Ihrer Gerte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zustndigen stdtischen Bro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorger auf.

18. Installieren Sie das Gert nicht in einer beengten Umgebung, zum Beispiel Bcherregal oder hnliches.

19. Stellen Sie keine Gegenstnde mit offenen Flammen, etwa brennende Kerzen, auf das Gert.

20. Beachten Sie bei der Entsorgung von Batterien den Umweltschutz-Aspekt. Batterien mssen bei einer Batterie-Sammelstelle entsorgt werden.

21. Dieses Gert ist in tropischen und gemigten Klimazonen bis 45 C einsetzbar.

Music Tribe bernimmt keine Haftung fr Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen knnen ohne vorherige Ankndigung gendert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone und Coolaudio sind Warenzeichen oder eingetragene Warenzeichen der Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Alle Rechte vorbehalten.

Die geltenden Garantiebedingungen und zustzliche Informationen bezglich der von Music Tribe gewhrten beschrnkten Garantie finden Sie online unter musictribe.com/warranty.

Wichtige Sicherheitshinweise

HAFTUNGSAUSSCHLUSS

BESCHRNKTE GARANTIE

4 5Quick Start GuideCLARITY M/CLARITY M STEREO

Aviso! Terminais marcados com o smbolo carregam corrente eltrica de magnitude

suficiente para constituir um risco de choque eltrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de " ou plugues com trava de toro pr-instalados. Todas as outras instalaes e modificaes devem ser efetuadas por pessoas qualificadas.

Este smbolo, onde quer que o encontre, alerta-o para a leitura das instrues de manuseamento que acompanham o

equipamento. Por favor leia o manual de instrues.

Ateno De forma a diminuir o risco de choque elctrico, no remover a cobertura

(ou a seco de trs). No existem peas substituveis por parte do utilizador no seu interior. Para esse efeito recorrer a um tcnico qualificado.

Ateno Para reduzir o risco de incndios ou choques elctricos o aparelho no deve ser

exposto chuva nem humidade. Alm disso, no deve ser sujeito a salpicos, nem devem ser colocados em cima do aparelho objectos contendo lquidos, tais como jarras.

Ateno Estas instrues de operao devem ser utilizadas, em exclusivo, por tcnicos de

assistncia qualificados. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao, salvo se possuir as qualifi-caes necessrias. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao. S o dever fazer se possuir as qualificaes necessrias.

1. Leia estas instrues.

2. Guarde estas instrues.

3. Preste ateno a todos os avisos.

4. Siga todas as instrues.

5. No utilize este dispositivo perto de gua.

6. Limpe apenas com um pano seco.

7. No obstrua as entradas de ventilao. Instale de acordo com as instrues do fabricante.

8. No instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, foges de sala ou outros aparelhos (incluindo amplificadores) que produzam calor.

9. No anule o objectivo de segurana das fichas polarizadas ou do tipo de ligao terra. Uma ficha polarizada dispe de duas palhetas sendo uma mais larga do que a outra. Uma ficha do tipo ligao terra dispe

de duas palhetas e um terceiro dente de ligao terra. A palheta larga ou o terceiro dente so fornecidos para sua segurana. Se a ficha fornecida no encaixar na sua tomada, consulte um electricista para a substituio da tomada obsoleta.

10. Proteja o cabo de alimentao de pisadelas ou apertos, especialmente nas fichas, extenses, e no local de sada da unidade. Certifique-se de que o cabo elctrico est protegido. Verifique particularmente nas fichas, nos receptculos e no ponto em que o cabo sai do aparelho.

11. O aparelho tem de estar sempre conectado rede elctrica com o condutor de proteco intacto.

12. Se utilizar uma ficha de rede principal ou uma tomada de aparelhos para desligar a unidade de funcionamento, esta deve estar sempre acessvel.

13. Utilize apenas ligaes/acessrios especificados pelo fabricante.

14. Utilize apenas com o carrinho, estrutura, trip, suporte, ou mesa especificados pelo fabricante ou vendidos com o dispositivo. Quando utilizar um carrinho, tenha cuidado ao

mover o conjunto carrinho/dispositivo para evitar danos provocados pela terpidao.

15. Desligue este dispositivo durante as trovoadas ou quando no for utilizado durante longos perodos de tempo.

16. Qualquer tipo de reparao deve ser sempre efectuado por pessoal qualificado. necessria uma reparao sempre que a unidade tiver sido de alguma forma danificada, como por exemplo: no caso do cabo de alimentao ou ficha se encontrarem danificados; na eventualidade de lquido ter sido derramado ou objectos terem cado para dentro do dispositivo; no caso da unidade ter estado exposta chuva ou humidade; se esta no funcionar normalmente, ou se tiver cado.

17. Correcta eliminao deste produto: este smbolo indica que o produto no deve ser eliminado juntamente com os resduos domsticos, segundo a Directiva REEE (2012/19/EU) e a legislao nacional. Este produto dever

ser levado para um centro de recolha licenciado para a reciclagem de resduos de equipamentos elctricos e electrnicos (EEE). O tratamento incorrecto deste tipo de resduos pode ter um eventual impacto negativo no ambiente e na sade humana devido a substncias potencialmente perigosas que esto geralmente associadas aos EEE. Ao mesmo tempo, a sua colaborao para a eliminao correcta deste produto ir contribuir para a utilizao eficiente dos recursos naturais. Para mais informao acerca dos locais onde poder deixar o seu equipamento usado para reciclagem, favor contactar os servios municipais locais, a entidade de gesto de resduos ou os servios de recolha de resduos domsticos.

18. No instale em lugares confinados, tais como estantes ou unidades similares.

19. No coloque fontes de chama, tais como velas acesas, sobre o aparelho.

20. Favor, obedecer os aspectos ambientais de descarte de bateria. Baterias devem ser descartadas em um ponto de coletas de baterias.

21. Esse aparelho pode ser usado em climas tropicais e moderados at 45C.

O Music Tribe no se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrio, fotografia, ou declarao aqui contidas. Dados tcnicos, aparncias e outras informaes esto sujeitas a modificaes sem aviso prvio. Todas as marcas so propriedade de seus respectivos donos. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone e Coolaudio so marcas ou marcas registradas do Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Todos direitos reservados.

Para obter os termos de garantia aplicveis e condies e informaes adicionais a respeito da garantia limitada do Music Tribe, favor verificar detalhes na ntegra atravs do website musictribe.com/warranty.

Instrues de Segurana Importantes

LEGAL RENUNCIANTE

GARANTIA LIMITADA

DISCLAIMER LEGALE

GARANZIA LIMITATA

Attenzione I terminali contrassegnati da questo simbolo conducono una corrente elettrica

di magnitudine sufficiente a costituire un rischio di scossa elettrica. Utilizzare solo cavi per altoparlanti professionali di alta qualit con jack sbilanciati da 6,35mm. o connettori con blocco a rotazione. Tutte le altre installazioni o modifiche devono essere eseguite esclusivamente da personale qualificato.

Attenzione Questo simbolo, ovunque appaia, avverte della presenza di una tensione pericolosa

non isolata all'interno dello chassis, tensione che pu essere sufficiente per costituire un rischio di scossa elettrica.

Attenzione Questo simbolo, ovunque appaia, segnala importanti istruzioni operative e di

manutenzione nella documentazione allegata. Si invita a leggere il manuale.

Attenzione Per ridurre il rischio di scosse elettriche, non rimuovere il coperchio superiore

(o la sezione posteriore). All'interno non ci sono parti riparabili dall'utente. Per la manutenzione rivolgersi a personale qualificato.

Attenzione Per ridurre il rischio di incendi o scosse elettriche, non esporre questo apparecchio

a pioggia e umidit. L'apparecchio non deve essere esposto a gocciolio o schizzi di liquidi e nessun oggetto contenente liquidi, come vasi, deve essere collocato sull'apparecchio.

Attenzione Queste istruzioni di servizio sono destinate esclusivamente a personale qualificato.

Per ridurre il rischio di scosse elettriche non eseguire interventi di manutenzione diversi da quelli contenuti nel manuale di istruzioni. Le riparazioni devono essere eseguite da personale di assistenza qualificato.

1. Leggere queste istruzioni.

2. Conservare queste istruzioni.

3. Prestare attenzione a tutti gli avvisi.

4. Applicare tutte le istruzioni.

5. Non utilizzare questo dispositivo vicino l'acqua.

6. Pulire esclusivamente con un panno asciutto.

7. Non bloccare le aperture di ventilazione. Installare in conformit con le istruzioni del produttore.

8. Non installare vicino a fonti di calore come radiatori, termoregolatori, stufe o altri apparecchi (inclusi amplificatori) che producono calore.

9. Non escludere la sicurezza fornita dalla spina polarizzata o con messa a terra. Una spina polarizzata ha due lame, una pi larga dell'altra. Una spina con messa a terra ha due lame e un terzo polo di messa a terra. La lama larga o il terzo polo sono forniti per la vostra sicurezza. Se la spina fornita non si adatta alla presa, consultare un elettricista per la sostituzione della presa obsoleta.

10. Proteggere il cavo di alimentazione dal calpestio o essere schiacciato in particolare alle spine, prese di corrente e il punto in cui esce dall'apparecchio.

11. Utilizzare esclusivamente dispositivi/accessori specificati dal produttore.

12. Utilizzare solo carrelli, supporti, treppiedi, staffe o tavoli indicati dal produttore o venduti con l'apparecchio. Utilizzando un carrello, prestare attenzione quando si sposta la combinazione

carrello/apparecchio per evitare lesioni dovute al ribaltamento.

13. Scollegare questo apparecchio durante i temporali o se non utilizzato per lunghi periodi di tempo.

14. Per tutte le riparazioni rivolgersi a personale qualificato. La manutenzione necessaria quando l'apparecchio danneggiato in qualsiasi modo, come danneggiamento del cavo di alimentazione o della spina, versamento di liquido o oggetti caduti nell'apparecchio, se l'apparecchio stato esposto a pioggia o umidit, se non funziona normalmente o caduto.

15. L'apparecchio deve essere collegato a una presa di corrente elettrica con messa a terra di protezione.

16. Se la spina o una presa del dispositivo utilizzata come dispositivo di disconnessione, deve essere facilmente utilizzabile.

17. Smaltimento corretto di questo prodotto: questo simbolo indica che questo dispositivo non deve essere smaltito insieme ai rifiuti domestici, secondo la Direttiva RAEE (2012/19 / UE) e la vostra legislazione

nazionale. Questo prodotto deve essere portato in un centro di raccolta autorizzato per il riciclaggio di rifiuti di apparecchiature elettriche ed elettroniche (RAEE). La cattiva gestione di questo tipo di rifiuti potrebbe avere un possibile impatto negativo sull'ambiente e sulla salute umana a causa di sostanze potenzialmente pericolose che sono generalmente associate alle apparecchiature elettriche ed elettroniche. Nello stesso tempo la vostra collaborazione al corretto smaltimento di questo prodotto contribuir all'utilizzo efficiente delle risorse naturali. Per ulteriori informazioni su dove possibile trasportare le apparecchiature per il riciclaggio vi invitiamo a contattare l'ufficio comunale locale o il servizio di raccolta dei rifiuti domestici.

18. Non installare in uno spazio ristretto, come in una libreria o in una struttura simile.

19. Non collocare sul dispositivo fonti di fiamme libere, come candele accese.

20. Per lo smaltimento delle batterie, tenere in considerazione gli aspetti ambientali. Le batterie devono essere smaltite in un punto di raccolta delle batterie esauste.

21. Questo apparecchio pu essere usato in climi tropicali e temperati fino a 45C.

Music Tribe non si assume alcuna responsabilit per eventuali danni che possono essere subiti da chiunque si affidi in tutto o in parte a qualsiasi descrizione, fotografia o dichiarazione contenuta qui. Specifiche tecniche, aspetti e altre informazioni sono soggette a modifiche senza preavviso. Tutti i marchi sono di propriet dei rispettivi titolari. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone e Coolaudio sono marchi o marchi registrati di Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Tutti i diritti riservati .

Per i termini e le condizioni di garanzia applicabili e le informazioni aggiuntive relative alla garanzia limitata di Music Tribe, consultare online i dettagli completi su musictribe.com/warranty.

Informazioni importanti

6 7Quick Start GuideCLARITY M/CLARITY M STEREO

Waarschuwing Aansluitingen die gemerkt zijn met het symbool voeren een zodanig hoge

spanning dat ze een risico vormen voor elektrische schokken. Gebruik uitsluitend kwalitatief hoogwaardige, in de handel verkrijgbare luidsprekerkabels die voorzien zijn van " TS stekkers. Laat uitsluitend gekwalificeerd personeel alle overige installatie- of modificatiehandelingen uitvoeren.

Dit symbool wijst u altijd op belangrijke bedienings - en onderhoudsvoorschriften in de bijbehorende documenten.

Wij vragen u dringend de handleiding te lezen.

Attentie Verwijder in geen geval de bovenste afdekking (van het achterste gedeelte)

anders bestaat er gevaar voor een elektrische schok. Het apparaat bevat geen te onderhouden onderdelen. Reparatiewerkzaamheden mogen uitsluitend door gekwalificeerd personeel uitgevoerd worden.

Attentie Om het risico op brand of elektrische schokken te beperken, dient u te

voorkomen dat dit apparaat wordt blootgesteld aan regen en vocht. Het apparaat mag niet worden blootgesteld aan neerdruppelend of opspattend water en er mogen geen met water gevulde voorwerpen zoals een vaas op het apparaat worden gezet.

Attentie Deze onderhoudsinstructies zijn uitsluitend bedoeld voor gekwalificeerd

onderhoudspersoneel. Om elektrische schokken te voorkomen, mag u geen andere onderhoudshandelingen verrichten dan in de bedieningsinstructies vermeld staan. Reparatiewerkzaamheden mogen alleen uitgevoerd worden door gekwalificeerd onderhoudspersoneel.

1. Lees deze voorschriften.

2. Bewaar deze voorschriften.

3. Neem alle waarschuwingen in acht.

4. Volg alle voorschriften op.

5. Gebruik dit apparaat niet in de buurt van water.

6. Reinig het uitsluitend met een droge doek.

7. Let erop geen van de ventilatie-openingen te bedekken. Plaats en installeer het volgens de voor- schriften van de fabrikant.

8. Het apparaat mag niet worden geplaatst in de buurt van radiatoren, warmte-uitlaten, kachels of andere zaken (ook versterkers) die warmte afgeven.

9. Maak de veiligheid waarin door de polarisatie- of aardingsstekker wordt voorzien, niet ongedaan. Een polarisatiestekker heeft twee bladen, waarvan er een breder is dan het andere. Een aardingsstekker heeft twee bladen en een derde uitsteeksel voor de aarding. Het bredere blad of het derde uitsteeksel zijn er voor uw veiligheid. Mocht de geleverde stekker niet in uw stopcontact passen, laat het contact dan door een elektricien vervangen.

10. Om beschadiging te voorkomen, moet de stroomleiding zo gelegd worden dat er niet kan worden over gelopen en dat ze beschermd is tegen scherpe kanten. Zorg zeker voor voldoende bescherming aan de stekkers, de verlengkabels en het punt waar het netsnoer het apparaat verlaat.

11. Het toestel met altijd met een intacte aarddraad aan het stroomnet aangesloten zijn.

12. Wanneer de stekker van het hoofdnetwerk of een apparaatstopcontact de functionele eenheid voor het uitschakelen is, dient deze altijd toegankelijk te zijn.

13. Gebruik uitsluitend door de producent gespeci- ficeerd toebehoren c.q. onderdelen.

14. Gebruik het apparaat uitsluitend in combinatie met de wagen, het statief, de driepoot, de beugel of tafel die door de producent is aangegeven, of die in combinatie met het apparaat wordt verkocht.

Bij gebruik van een wagen dient men voorzichtig te zijn bij het verrijden van de combinatie wagen/apparaat en letsel door vallen te voorkomen.

15. Bij onweer en als u het apparaat langere tijd niet gebruikt, haalt u de stekker uit het stopcontact.

16. Laat alle voorkomende reparaties door vakkundig en bevoegd personeel uitvoeren. Reparatiewerk-zaamheden zijn nodig als het toestel op enige wijze beschadigd is geraakt, bijvoorbeeld als de hoofd-stroomkabel of -stekker is beschadigd, als er vloeistof of voorwerpen in terecht zijn gekomen, als het aan regen of vochtigheid heeft bloot-gestaan, niet normaal functioneert of wanneer het is gevallen.

17. Correcte afvoer van dit product: dit symbool geeft aan dat u dit product op grond van de AEEA-richtlijn (2012/19/EU) en de nationale wetgeving van uw land niet met het gewone huishoudelijke afval mag

weggooien. Dit product moet na afloop van de nuttige levensduur naar een officile inzamelpost voor afgedankte elektrische en elektronische apparatuur (AEEA) worden gebracht, zodat het kan worden gerecycleerd. Vanwege de potentieel gevaarlijke stoffen die in elektrische en elektronische apparatuur kunnen voorkomen, kan een onjuiste afvoer van afval van het onderhavige type een negatieve invloed op het milieu en de menselijke gezondheid hebben. Een juiste afvoer van dit product is echter niet alleen beter voor het milieu en de gezondheid, maar draagt tevens bij aan een doelmatiger gebruik

van de natuurlijke hulpbronnen. Voor meer informatie over de plaatsen waar u uw afgedankte apparatuur kunt inleveren, kunt u contact opnemen met uw gemeente of de plaatselijke reinigingsdienst.

18. Installeer niet in een kleine ruimte, zoals een boekenkast of iets dergelijks.

19. Plaats geen open vlammen, zoals brandende kaarsen, op het apparaat.

20. Houd rekening met de milieuaspecten van het afvoeren van batterijen. Batterijen moeten bij een inzamelpunt voor batterijen worden ingeleverd.

21. Dit apparaat kan worden gebruikt in tropische en gematigde klimaten tot 45 C.

Music Tribe aanvaardt geen aansprakelijkheid voor enig verlies dat kan worden geleden door een persoon die geheel of gedeeltelijk vertrouwt op enige beschrijving, foto of verklaring hierin. Technische specificaties, verschijningen en andere informatie kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle handelsmerken zijn eigendom van hun respectievelijke eigenaren. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones en Coolaudio zijn handelsmerken of gedeponeerde handelsmerken van Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Alle rechten voorbehouden.

Voor de toepasselijke garantievoorwaarden en aanvullende informatie met betrekking tot de beperkte garantie van Music Tribe, zie de volledige details online op musictribe.com/warranty.

Belangrijke veiligheidsvoorschriften

WETTELIJKE ONTKENNING

BEPERKTE GARANTIE

Varning Uttag markerade med symbolen leder elektrisk strmstyrka som r tillrckligt

stark fr att utgra en risk fr elchock. Anvnd endast hgkvalitativa, kommersiellt tillgngliga hgtalarkablar med frhandsinstallerade " TS-kontakter. All annan installering eller modifikation br endast utfras av kompetent personal.

Den hr symbolen hnvisar till viktiga punkter om anvndning och underhll i den medflljande dokumentationen.

Var vnlig och ls bruksanvisningen.

Frsiktighet Minska risken fr elektriska sttar genom att aldrig ta av hljet upptill p apparaten

(eller ta av baksidan). Inuti apparaten finns det inga delar som kan repareras av anvndaren. Endast kvalificerad personal fr genomfra reparationer.

Frsiktighet Fr att minska risken fr brand och elektriska sttar ska apparaten skyddas

mot regn och fukt. Apparaten gr inte utsttas fr dropp eller spill och inga vattenbehllare som vaser etc. fr placeras p den.

Frsiktighet Serviceinstruktionen r enbart avsedd fr kvalificerad servicepersonal. Fr att

undvika risker genom elektriska sttar, genomfr inga reparationer p apparaten, vilka inte r beskrivna i bruksanvisningen. Endast kvalificerad fackpersonal fr genomfra reparationerna.

1. Ls dessa anvisningar.

2. Spara dessa anvisningar.

3. Beakta alla varningar.

4. Flj alla anvisningar.

5. Anvnd inte apparaten i nrheten av vatten.

6. Rengr endast med torr trasa.

7. Blockera inte ventilationsppningarna. Installera enligt tillverkarens anvisningar.

8. Installera aldrig intill vrmekllor som vrme- element, varmluftsintag, spisar eller annan utrustning som avger vrme (inklusive frstrkare).

9. ndra aldrig en polariserad eller jordad kontakt. En polariserad kontakt har tv blad det ena bredare n det andra. En jordad kontakt har tv blad och ett tredje jordstift. Det breda bladet eller jordstiftet r till fr din skerhet. Om den medfljande kontakten inte passar i ditt uttag, ska du kontakta en elektriker fr att f uttaget bytt.

10. Frlgg elkabeln s, att det inte r mjligt att trampa p den och att den r skyddad mot skarpa kanter och inte kan skadas. Ge i synnerhet akt p omrdena omkring stickkontakterna, frlngningskablarna och p det stlle, dr elkabeln lmnar apparaten, r tillrckligt skyddade.

11. Apparaten mste alltid vara ansluten till elntet med intakt skyddsledare.

12. Om huvudkontakten, eller ett apparatuttag, fungerar som avstngningsenhet mste denna alltid vara tillgnglig.

13. Anvnd endast tillkopplingar och tillbehr som angetts av tillverkaren.

14. Anvnd endast med vagn, stativ, trefot, hllare eller bord som angetts av tillverkaren, eller som slts till- sammans med apparaten. Om du anvnder en vagn, var frsiktig, nr du

frflyttar kombinationen vagn-apparat, fr att frhindra olycksfall genom snubbling.

15. Dra ur anslutningskontakten und skvder eller nr apparaten inte ska anvndas under ngon lngre tid.

16. Lt kvalificerad personal utfra all service. Service r ndvndig nr apparaten har skadats, t.ex. nr en elkabel eller kontakt r skadad, vtska eller frmmande freml har kommit in i apparaten, eller nr den har fallit i golvet.

17. Kassera produkten p rtt stt: den hr symbolen indikerar att produkten inte ska kastas i hushllssoporna, enligt WEEE direktivet (2012/19/EU) och gllande, nationell lagstiftning. Produkten ska lmnas till ett

auktoriserat tervinningsstlle fr elektronisk och elektrisk utrustning (EEE). Om den hr sortens avfall hanteras p fel stt kan miljn, och mnniskors hlsa, pverkas negativt p grund av potentiella risksubstanser som ofta associeras med EEE. Avfallshanteras produkten dremot p rtt stt bidrar detta till att naturens resurser anvnds p ett bra stt. Kontakta kommun, ansvarig frvaltning eller avfallshanteringsfretag fr mer information om tervinningscentral dr produkten kan lmnas

18. Installera inte i ett trngt utrymme, t.ex. i en bokhylsa eller liknande enhet.

19. Placera inte kllor med ppen eld, t.ex. tnda ljus, p apparaten.

20. Tnk p miljaspekterna vid kassering av batterier. Batterier mste kasseras p ett batteriuppsamlingsstlle.

21. Denna apparat kan anvndas i tropiska och mttliga klimat upp till 45 C.

Music Tribe tar inget ansvar fr ngon frlust som kan drabbas av ngon person som helt eller delvis frlitar sig p ngon beskrivning, fotografi eller uttalande som finns hr. Tekniska specifikationer, utseenden och annan information kan ndras utan fregende meddelande. Alla varumrken tillhr respektive gare. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones och Coolaudio r varumrken eller registrerade varumrken som tillhr Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Alla Rttigheter reserverade.

Fr tillmpliga garantivillkor och ytterligare information om Music Tribes begrnsade garanti, se fullstndig information online p musictribe.com/warranty.

Viktiga skerhetsanvisningar

BEGRNSAD GARANTI

FRISKRIVNINGSKLAUSUL

8 9Quick Start GuideCLARITY M/CLARITY M STEREO

Uwaga Terminale oznaczone symbolem przenosz wystarczajco wysokie

napicie elektryczne, aby stworzy ryzyko poraenia prdem. Uywaj wycznie wysokiej jakoci fabrycznie przygotowanych kabli z zainstalowanymi wtyczkami " TS. Wszystkie inne instalacje lub modyfikacje powinny by wykonywane wycznie przez wykwalifikowany personel techniczny.

Ten symbol informuje o wanych wskazwkach dotyczcych obsugi i konserwacji urzdzenia w doczonej

dokumentacji. Prosz przeczyta stosowne informacje w instrukcji obsugi.

Uwaga W celu wyeliminowania zagroenia poraenia prdem zabrania si

zdejmowania obudowy lub tylnej cianki urzdzenia. Elementy znajdujce si we wntrzu urzdzenia nie mog by naprawiane przez uytkownika. Naprawy mog by wykonywane jedynie przez wykwalifikowany personel.

Uwaga W celu wyeliminowania zagroenia poraenia prdem lub zapalenia si

urzdzenia nie wolno wystawia go na dziaanie deszczu i wilgotnoci oraz dopuszcza do tego, aby do wntrza dostaa si woda lub inna ciecz. Nie naley stawia na urzdzeniu napenionych ciecz przedmiotw takich jak np. wazony lub szklanki.

Uwaga Prace serwisowe mog by wykonywane jedynie przez wykwalifikowany personel.

W celu uniknicia zagroenia poraenia prdem nie naley wykonywa adnych manipulacji, ktre nie s opisane w instrukcji obsugi. Naprawy wykonywane mog by jedynie przez wykwalifikowany personel techniczny.

1. Prosz przeczyta ponisze wskazwki.

2. Prosz przechowywa niniejsz instrukcj.

3. Naley przestrzega wszystkich wskazwek ostrzegawczych.

4. Naley postpowa zgodnie z instrukcj obsugi.

5. Urzdzenia nie wolno uywa w pobliu wody.

6. Urzdzenie mona czyci wycznie such szmatk.

7. Nie zasania otworw wentylacyjnych. W czasie podczania urzdzenia naley przestrzega zalece producenta.

8. Nie stawia urzdzenia w pobliu rde ciepa takich, jak grzejniki, piece lub urzdzenia produkujce ciepo (np. wzmacniacze).

9. W adnym wypadku nie naley usuwa zabezpiecze z wtyczek dwubiegunowych oraz wtyczek z uziemieniem. Wtyczka dwubiegunowa posiada dwa wtyki kontaktowe o rnej szerokoci. Wtyczka z uziemieniem ma dwa wtyki kontaktowe i trzeci wtyk uziemienia. Szerszy wtyk kontaktowy lub dodatkowy wtyk uziemienia su do zapewnienia bezpieczestwa uytkownikowi. Jeli format wtyczki urzdzenia nie odpowiada standardowi gniazdka, prosz zwrci si do elektryka z prob o wymienienie gniazda.

10. Kabel sieciowy naley uoy tak, aby nie by naraony na deptanie i dziaanie ostrych krawdzi, co mogoby doprowadzi do jego uszkodzenia. Szczegln uwag zwrci naley na odpowiedni ochron miejsc w pobliu wtyczek i przeduaczy oraz miejsce, w ktrym kabel sieciowy przymocowany jest do urzdzenia.

11. Urzdzenie musi by zawsze podczone do sieci sprawnym przewodem z uziemieniem.

12. Jeeli wtyk sieciowy lub gniazdo sieciowe w urzdzeniu peni funkcj wycznika, to musz one by zawsze atwo dostpne.

13. Uywa wycznie sprztu dodatkowego i akcesoriw zgodnie z zaleceniami producenta.

14. Uywa jedynie zalecanych przez producenta lub znajdujcych si w zestawie wzkw, stojakw, statyww, uchwytw i stow. W przypadku

posugiwania si wzkiem naley zachowa szczegln ostrono w trakcie przewoenia zestawu, aby unikn niebezpieczestwa potknicia si i zranienia.

15. W trakcie burzy oraz na czas duszego nieuywania urzdzenia naley wyj wtyczk z gniazdka sieciowego.

16. Wykonywanie wszelkich napraw naley zleca jedynie wykwalifikowanym pracownikom serwisu. Przeprowadzenie przegldu technicznego staje si konieczne, jeli urzdzenie zostao uszkodzone w jakikolwiek sposb (dotyczy to take kabla sieciowego lub wtyczki), jeli do wntrza urzdzenia dostay si przedmioty lub ciecz, jeli urzdzenie wystawione byo na dziaanie deszczu lub wilgoci, jeli urzdzenie nie funkcjonuje poprawnie oraz kiedy spado na podog.

17. Prawidowa utylizacja produktu: Ten symbol wskazuje, e tego produktu nie naley wyrzuca razem ze zwykymi odpadami domowymi, tylko zgodnie z dyrektyw w sprawie zuytego sprztu

elektrycznego i elektronicznego (WEEE) (2012/19/EU) oraz przepisami krajowymi. Niniejszy produkt naley przekaza do autoryzowanego punktu zbirki zuytego sprztu elektrycznego i elektronicznego. Niewaciwe postpowanie z tego typu odpadami moe wywoa szkodliwe dziaanie na rodowisko naturalnej i

zdrowie czowieka z powodu potencjalnych substancji niebezpiecznych zaliczanych jako zuyty sprzt elektryczny i elektroniczny. Jednoczenie, Twj wkad w prawidow utylizacj niniejszego produktu przyczynia si do oszczdnego wykorzystywania zasobw naturalnych. Szczegowych informacji o miejscach, w ktrych mona oddawa zuyty sprzt do recyklingu, udzielaj urzdy miejskie, przedsibiorstwa utylizacji odpadw lub najbliszy zakad utylizacji odpadw.

18. Nie instaluj w ograniczonej przestrzeni, takiej jak pka na ksiki lub podobny zestaw.

19. Nie stawiaj na urzdzeniu rde otwartego ognia, takich jak zapalone wiece.

20. Naley pamita o rodowiskowych aspektach utylizacji baterii. Baterie naley utylizowa w punkcie zbirki baterii.

21. To urzdzenie moe by uywane w klimacie tropikalnym i umiarkowanym do 45 C.

Music Tribe nie ponosi odpowiedzialnoci za jakiekolwiek straty, ktre mog ponie osoby, ktre polegaj w caoci lub w czci na jakimkolwiek opisie, fotografii lub owiadczeniu zawartym w niniejszym dokumencie. Specyfikacje techniczne, wygld i inne informacje mog ulec zmianie bez powiadomienia. Wszystkie znaki towarowe s wasnoci ich odpowiednich wacicieli. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones i Coolaudio s znakami towarowymi lub zastrzeonymi znakami towarowymi firmy Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 Wszystkie prawa zastrzeone.

Aby zapozna si z obowizujcymi warunkami gwarancji i dodatkowymi informacjami dotyczcymi ograniczonej gwarancji Music Tribe, zapoznaj si ze wszystkimi szczegami w trybie online pod adresem musictribe.com/warranty.

Wane informacje o bezpieczestwie

ZASTRZEENIA PRAWNE

OGRANICZONA GWARANCJA

10 11Quick Start GuideCLARITY M/CLARITY M STEREO

Hook-Up

CLARITY M/CLARITY M STEREO Hook-up

USB connection for rmware updates and preset exchange

Included cable that goes from SUB-D-15 to 3 AES unbalanced inputs on BNC-female connectors, plus a " stereo (2 GPI) and 18" mono (GPO) connector. Connect to an external mixing desk with AES unbalanced outputs on BNC. (Stereo version has 1 AES unbalanced input)

Hookup for external mixing desk, surround sound

Conexin para mesa de mezclas externa, sonido envolvente

Branchement pour table de mixage externe, son surround

Anschluss fr externes Mischpult, Surround-Sound

Conexo para mesa de mixagem externa, som surround

Collegamento per mixer esterno, suono surround

Aansluiting voor externe mengtafel, surround sound

Anslutning fr externt mixerbord, surroundljud

Podczenie do zewntrznego miksera, dwik przestrzenny

USB connection for rmware updates, preset exchange and plug-in metering

Plug-in metering - connecting to a computer

Medicin enchufable: conexin a una computadora

Mesure de plug-in - connexion un ordinateur

Plug-in-Messung - Anschluss an einen Computer

Medio de plug-in - conectando a um computador

Misurazione plug-in: collegamento a un computer

Plug-in-meting - verbinding maken met een computer

Plug-in-mtning - anslutning till en dator

Pomiar wtyczki - podczenie do komputera

12 13Quick Start GuideCLARITY M/CLARITY M STEREO

Hook-Up

CLARITY M/CLARITY M STEREO Hook-up

USB connection for rmware updates and preset exchange

Indication of peaks or overloads to external equipment

Optical TOS cable

Audio interface

2 button footswitch for Play/Pause and Meter Reset

Hookup for audio interface, digital TOS input, GPIO

Conexin para interfaz de audio, entrada TOS digital, GPIO

Branchement pour interface audio, entre numrique TOS, GPIO

Anschluss fr Audio-Interface, digitaler TOS-Eingang, GPIO

Conexo para interface de udio, entrada digital TOS, GPIO

Collegamento per interfaccia audio, ingresso digitale TOS, GPIO

Aansluiting voor audio-interface, digitale TOS-ingang, GPIO

Anslutning fr ljudgrnssnitt, digital TOS-ingng, GPIO

Podczenie do interfejsu audio, cyfrowe wejcie TOS, GPIO

USB connection for rmware updates and preset exchange

Custom SUB-D-15 cable with included BNC to RCA adapter connects to the S/PDIF output of an audio interface

Audio interface

Hookup for audio interface, digital S/PDIF input

Conexin para interfaz de audio, entrada digital S / PDIF

Raccordement pour interface audio, entre numrique S / PDIF

Anschluss fr Audio-Interface, digitaler S / PDIF-Eingang

Conexo para interface de udio, entrada digital S / PDIF

Collegamento per interfaccia audio, ingresso S / PDIF digitale

Aansluiting voor audio-interface, digitale S / PDIF-ingang

Anslutning fr ljudgrnssnitt, digital S / PDIF-ingng

Podczenie do interfejsu audio, wejcie cyfrowe S / PDIF

14 15Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Controls and Connectors (EN) Controls and Connectors

(1) Radar loudness meter showing short-term loudness history, momentary loudness and program loudness.

(2) Detailed statistics overview for all key loudness measuring parameters

(3) State-of-the-art true peak meter identifies clipping in DACs, CODECs and downstream filters.

(4) Downmix compliance meters based on TC Electronics industry-standard loudness measurement algorithms.

(5) Left-Right or Left-Right/LS-RS Correlation Meter. This displays the phase relationship of a stereo signal, where the far right (+1) position indicates perfect phase, the center (0) position shows the widest acceptable divergence, and measurements below 0 indicate out-of-phase material.

(6) Adjustment knob allows various parameters to be controlled.

(7) These selection buttons access the corresponding functions listed in the LCD display. Holding the far right button turns the unit on and off.

(8) The current source is displayed on the front page. In plug-in mode, the track name and number where the plug-in is inserted will be indicated here.

(9) High-accuracy real time analyzer with 1/3 octave resolution and pr. band zoom.

(10) Holes for mounting brackets such as RAM-mount (not included).

(11) Kensington lock.

(12) Power connection.

(13) Connector for included breakout cable with 6 channels AES inputs (stereo version has 2 AES channels).

(14) USB connection for plug-in metering, preset exchange and firmware updates.

(15) Stereo optical input.

(9)

(1)

(11)

(2) (3)

(5)

(4)

(6) (7)

(10)

(12)

(8)

(13) (14)

(15)

16 17Quick Start GuideCLARITY M/CLARITY M STEREO

(ES) Controles y conectores (FR) Commandes et connecteurs

(1) Medidor de volumen de radar que muestra el historial de volumen a corto plazo, el volumen momentneo y el volumen del programa.

(2) Resumen de estadsticas detalladas para todos los parmetros clave de medicin de la sonoridad

(3) El medidor de picos verdaderos de ltima generacin identifica el recorte en los DAC, CODEC y filtros posteriores.

(4) Medidores de cumplimiento de mezcla descendente basados en los algoritmos de medicin de sonoridad estndar de la industria de TC Electronic.

(5) Medidor de correlacin izquierda-derecha o izquierda- derecha / LS-RS. Esto muestra la relacin de fase de una seal estreo, donde la posicin ms a la derecha (+1) indica una fase perfecta, la posicin central (0) muestra la divergencia ms amplia aceptable y las medidas por debajo de 0 indican material fuera de fase.

(6) La perilla de ajuste permite controlar varios parmetros.

(7) Estos botones de seleccin acceden a las funciones correspondientes enumeradas en la pantalla LCD. Mantener pulsado el botn de la derecha enciende y apaga la unidad.

(8) La fuente actual se muestra en la pgina principal. En el modo de mdulo adicional, aqu se indicar el nombre de la pista y el nmero donde se inserta el mdulo adicional.

(9) Analizador en tiempo real de alta precisin con resolucin de 1/3 de octava y pr. zoom de banda.

(10) Agujeros para soportes de montaje como RAM-mount (no incluidos).

(11) Cerradura Kensington.

(12) Conexin elctrica.

(13) Conector para cable de conexin incluido con 6 canales de entradas AES (la versin estreo tiene 2 canales AES).

(14) Conexin USB para medicin enchufable, intercambio de preajustes y actualizaciones de firmware.

(15) Entrada ptica estreo.

(1) Compteur de sonie radar montrant lhistorique de la sonie court terme, la sonie momentane et la sonie du programme.

(2) Aperu dtaill des statistiques pour tous les paramtres cls de mesure de la sonie

(3) Le mesureur de crte la pointe de la technologie identifie lcrtage dans les CNA, les CODEC et les filtres en aval.

(4) Compteurs de conformit Downmix bass sur les algorithmes de mesure de la sonie standard de TC Electronic.

(5) Indicateur de corrlation gauche-droite ou gauche- droite / LS-RS. Cela affiche la relation de phase dun signal stro, o la position extrme droite (+1) indique une phase parfaite, la position centrale (0) montre la divergence acceptable la plus large et les mesures infrieures 0 indiquent un matriau dphas.

(6) Le bouton de rglage permet de contrler divers paramtres.

(7) Ces boutons de slection permettent daccder aux fonctions correspondantes rpertories sur lcran LCD. Maintenez le bouton le plus droite pour allumer et teindre lappareil.

(8) La source actuelle est affiche sur la premire page. En mode plug-in, le nom et le numro de la piste o le plug-in est insr seront indiqus ici.

(9) Analyseur en temps rel de haute prcision avec une rsolution de 1/3 doctave et pr. zoom de bande.

(10) Trous pour les supports de montage tels que le support RAM (non inclus).

(11) Verrou Kensington.

(12) Connexion lectrique.

(13) Connecteur pour cble panoui inclus avec entres AES 6 canaux (la version stro a 2 canaux AES).

(14) Connexion USB pour la mesure du plug-in, lchange de prrglages et les mises jour du firmware.

(15) Entre optique stro.

CLARITY M/CLARITY M STEREO Controls and Connectors 18 19Quick Start GuideCLARITY M/CLARITY M STEREO

(DE) Bedienelemente und Anschlsse (PT) Controles e conectores

(1) Radar-Lautstrkemessgert, das den kurzfristigen Lautheitsverlauf, die momentane Lautstrke und die Programmlautstrke anzeigt.

(2) Detaillierte Statistikbersicht fr alle wichtigen Loudness- Messparameter

(3) Das hochmoderne True Peak Meter identifiziert das Clipping in DACs, CODECs und nachgeschalteten Filtern.

(4) Downmix-Konformittsmesser basierend auf den branchenblichen Lautstrkemessalgorithmen von TC Electronic.

(5) Links-Rechts- oder Links-Rechts / LS-RS- Korrelationsmessgert. Dies zeigt die Phasenbeziehung eines Stereosignals an, wobei die Position ganz rechts (+1) die perfekte Phase anzeigt, die mittlere Position (0) die grte akzeptable Divergenz anzeigt und Messungen unter 0 phasenverschobenes Material anzeigen.

(6) Mit dem Einstellknopf knnen verschiedene Parameter gesteuert werden.

(7) Diese Auswahltasten greifen auf die entsprechenden Funktionen zu, die im LCD- Display aufgefhrt sind. Wenn Sie die Taste ganz rechts gedrckt halten, wird das Gert ein- und ausgeschaltet.

(8) Die aktuelle Quelle wird auf der Startseite angezeigt. Im Plug-In-Modus werden hier der Titelname und die Nummer angezeigt, in die das Plug-In eingefgt wurde.

(9) Hochprziser Echtzeitanalysator mit einer Auflsung von 1/3 Oktave und pr. Bandzoom.

(10) Lcher fr Montagehalterungen wie RAM-Mount (nicht im Lieferumfang enthalten).

(11) Kensington Schloss.

(12) Netzanschluss.

(13) Anschluss fr mitgeliefertes Breakout-Kabel mit 6-Kanal- AES-Eingngen (Stereo-Version mit 2 AES-Kanlen).

(14) USB-Anschluss fr Plug-In- Messung, voreingestellten Austausch und Firmware-Updates.

(15) Optischer Stereo-Eingang.

(1) Medidor de intensidade do radar mostrando histrico de intensidade de curto prazo, intensidade momentnea e intensidade do programa.

(2) Viso geral das estatsticas detalhadas para todos os principais parmetros de medio de volume

(3) O medidor de pico verdadeiro de ltima gerao identifica o corte em DACs, CODECs e filtros downstream.

(4) Medidores de conformidade de downmix baseados nos algoritmos de medio de volume padro da indstria da TC Electronic.

(5) Medidor de Correlao Esquerda-Direita ou Esquerda- Direita / LS-RS. Isso exibe a relao de fase de um sinal estreo, onde a posio mais direita (+1) indica fase perfeita, a posio central (0) mostra a divergncia mais ampla aceitvel e as medies abaixo de 0 indicam material fora de fase.

(6) O boto de ajuste permite que vrios parmetros sejam controlados.

(7) Esses botes de seleo acessam as funes correspondentes listadas no display LCD. Segurar o boto da extrema direita liga e desliga a unidade.

(8) A fonte atual exibida na pgina inicial. No modo plug- in, o nome da faixa e o nmero onde o plug-in est inserido sero indicados aqui.

(9) Analisador em tempo real de alta preciso com resoluo de 1/3 oitava e pr. zoom da banda.

(10) Orifcios para suportes de montagem, como montagem em RAM (no includos).

(11) Cadeado Kensington.

(12) Conexo de fora.

(13) Conector para cabo breakout incluso com entradas AES de 6 canais (a verso estreo possui 2 canais AES).

(14) Conexo USB para medio plug-in, troca de predefinies e atualizaes de firmware.

(15) Entrada tica estreo.

CLARITY M/CLARITY M STEREO Controls and Connectors 20 21Quick Start GuideCLARITY M/CLARITY M STEREO

(IT) Controlli e connettori (NL) Bedieningselementen en connectoren

(1) Misuratore di volume radar che mostra la cronologia del volume a breve termine, il volume momentaneo e il volume del programma.

(2) Panoramica dettagliata delle statistiche per tutti i parametri chiave di misurazione del volume

(3) Il vero peak meter allavanguardia identifica il clipping in DAC, CODEC e filtri a valle.

(4) Misuratori di conformit downmix basati sugli algoritmi di misurazione del volume standard di settore di TC Electronic.

(5) Misuratore di correlazione sinistra-destra o sinistra-destra / LS-RS. Visualizza la relazione di fase di un segnale stereo, dove la posizione estrema destra (+1) indica la fase perfetta, la posizione centrale (0) mostra la divergenza accettabile pi ampia e le misurazioni inferiori a 0 indicano materiale fuori fase.

(6) La manopola di regolazione consente di controllare vari parametri.

(7) Questi pulsanti di selezione accedono alle funzioni corrispondenti elencate nel display LCD. Tenendo premuto il pulsante allestrema destra si accende e si spegne lunit.

(8) La sorgente corrente viene visualizzata sulla prima pagina. In modalit plug-in, qui verranno indicati il nome e il numero della traccia in cui inserito il plug-in.

(9) Analizzatore in tempo reale ad alta precisione con risoluzione di 1/3 di ottava e pr. zoom della banda.

(10) Fori per staffe di montaggio come RAM-mount (non incluso).

(11) Blocco Kensington.

(12) Collegamento elettrico.

(13) Connettore per cavo breakout incluso con 6 canali di ingressi AES (la versione stereo ha 2 canali AES).

(14) Connessione USB per misurazione plug-in, scambio di preset e aggiornamenti del firmware.

(15) Ingresso ottico stereo.

(1) Radar luidheidsmeter die de luidheidsgeschiedenis op korte termijn, het momentane luidheid en het luidheid van het programma weergeeft.

(2) Gedetailleerd statistisch overzicht voor alle belangrijke meetparameters van loudness

(3) State-of-the-art True Peak-meter identificeert clipping in DACs, CODECs en stroomafwaartse filters.

(4) Nalevingsmeters downmixen op basis van TC Electronics industriestandaard luidheidsmeetalgoritmen.

(5) Links-rechts of links-rechts / LS-RS correlatiemeter. Dit geeft de faserelatie van een stereosignaal weer, waarbij de uiterst rechtse (+1) positie de perfecte fase aangeeft, de middelste (0) positie de breedste acceptabele divergentie en metingen onder 0 duiden op uit-fase materiaal.

(6) Met de instelknop kunnen verschillende parameters worden bediend.

(7) Deze selectieknoppen geven toegang tot de overeenkomstige functies die op het LCD-scherm worden vermeld. Door de uiterst rechtse knop ingedrukt te houden, wordt het apparaat in- en uitgeschakeld.

(8) De huidige bron wordt weergegeven op de voorpagina. In de plug-in- modus worden de tracknaam en het nummer waar de plug-in is ingevoegd hier aangegeven.

(9) Zeer nauwkeurige real-time analyser met een resolutie van 1/3 octaaf en pr. band zoom.

(10) Gaten voor montagebeugels zoals RAM-mount (niet inbegrepen).

(11) Kensington-slot.

(12) Stroomaansluiting.

(13) Connector voor meegeleverde breakout-kabel met 6 kanalen AES-ingangen (stereoversie heeft 2 AES-kanalen).

(14) USB-aansluiting voor plug-in meting, uitwisseling van voorinstellingen en firmware-updates.

(15) Stereo optische ingang.

CLARITY M/CLARITY M STEREO Controls and Connectors 22 23Quick Start GuideCLARITY M/CLARITY M STEREO

(SE) Kontroller och kontakter (PL) Elementy sterujce i zcza

(1) Radar-ljudmtare som visar kortvarig ljudstyrka, kortvarig ljudstyrka och programstyrka.

(2) Detaljerad statistikversikt fr alla viktiga mtparametrar

(3) Toppmodern sann toppmtare identifierar klippning i DAC, CODEC och nedstrms filter.

(4) Downmix- verensstmmelsesmtare baserade p TC Electronics brans chstandardmtningsalgoritmer.

(5) Vnster-hger eller vnster-hger / LS-RS- korrelationsmtare. Detta visar fasfrhllandet fr en stereosignal, dr positionen lngst till hger (+1) indikerar perfekt fas, mittpositionen (0) visar den bredaste acceptabla divergensen och mtningarna under 0 indikerar material utan fas.

(6) Justeringsknappen gr det mjligt att kontrollera olika parametrar.

(7) Dessa valknappar fr tkomst till motsvarande funktioner listade p LCD-displayen. Hll ned lngst till hger fr att sl p och stnga av enheten.

(8) Den aktuella kllan visas p frstasidan. I plugin-lge kommer sprnamnet och numret dr plugin-programmet stts in att anges hr.

(9) Analysator med hg noggrannhet i realtid med 1/3 oktavupplsning och pr. bandzoom.

(10) Hl fr monteringsfsten som RAM-montering (ingr ej).

(11) Kensington-ls.

(12) Strmanslutning.

(13) Kontakt fr medfljande breakout-kabel med 6 kanaler AES-ingngar (stereoversion har 2 AES-kanaler).

(14) USB-anslutning fr insticksmtning, frinstllt utbyte och firmwareuppdateringar.

(15) Stereo optisk ingng.

(1) Radarowy miernik gonoci pokazujcy krtkoterminow histori gonoci, chwilow gono i gono programu.

(2) Szczegowy przegld statystyk dla wszystkich kluczowych parametrw pomiaru gonoci

(3) Najnowoczeniejszy miernik rzeczywistej wartoci szczytowej identyfikuje przesterowanie w przetwornikach cyfrowo- analogowych, CODEC i filtrach kocowych.

(4) Mierniki zgodnoci Downmix oparte na standardowych algorytmach pomiaru gonoci firmy TC Electronic.

(5) Miernik korelacji lewo-prawo lub lewo-prawo / LS-RS. Wywietla zaleno fazow sygnau stereo, gdzie skrajne prawe pooenie (+1) wskazuje idealn faz, rodkowe (0) pokazuje najszersz akceptowaln dywergencj, a pomiary poniej 0 wskazuj materia poza faz.

(6) Pokrto regulacyjne umoliwia sterowanie rnymi parametrami.

(7) Te przyciski wyboru zapewniaj dostp do odpowiednich funkcji wymienionych na wywietlaczu LCD. Przytrzymanie skrajnego prawego przycisku wcza i wycza urzdzenie.

(8) Biece rdo jest wywietlane na pierwszej stronie. W trybie wtyczki w tym miejscu bdzie wywietlana nazwa i numer cieki, do ktrej wtyczka zostaa wstawiona.

(9) Analizator czasu rzeczywistego o wysokiej dokadnoci z rozdzielczoci 1/3 oktawy i pr. zoom pasma.

(10) Otwory na wsporniki montaowe, takie jak mocowanie RAM (brak w zestawie).

(11) Zamek Kensington.

(12) Podczenie zasilania.

(13) Zcze dla doczonego kabla breakout z 6 kanaami wej AES (wersja stereo ma 2 kanay AES).

(14) Zcze USB do pomiaru wtyczek, wymiany ustawie wstpnych i aktualizacji oprogramowania ukadowego.

(15) Wejcie optyczne stereo.

CLARITY M/CLARITY M STEREO Controls and Connectors 24 25Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Getting started (EN) Getting Started (ES) Puesta en marchaMount the included stand:

Remove the 2 hex screws that hold the stand flat against the back of the unit. The screws are designed to be operated with a 2.5 mm hex key, but you can also use a T10 Torx driver or a 3/32 SAE hex key if care is taken not to strip the screw.

Flip the stand around so that it sticks outward from the unit. The stand has rubber pads to prevent it from scratching the surface where it is placed.

Replace the screws into the same holes to secure the stand.

Connect the unit to AC power.

Use a standard TOS cable (not included) to connect an external digital audio device.

Use the SUB-D-15 cable (included) to connect an external digital audio device.

Hold the far right button to switch the unit on.

Plug-in Metering

a. Download the CLARITY M plug-in installer from tcelectronic.com/ clarity-m/support.

b. Follow the installation instructions.

c. Connect the unit to your computer via USB.

d. In your DAW software, insert the CLARITY M plug-in at the place you wish to monitor. This can be a normal track, a bus, an aux-bus or a master output.

e. In CLARITY M, go to the System (SYS) menu and set USB Mode to Plug-in.

In the unit, use the System menu > Inputs to select the appropriate input. Use System > Preset Folder to set your region for appropriate loudness standards.

Use Library (Lib) to select an appropriate preset and press EXIT.

Use the RTA/RADAR/VSCOPE switch to toggle between Radar, RTA and Vector Scope.

Note a full manual is available as a PDF, download at https://www.tcelectronic.com/ tcelectronic/product?modelCode=P0D9L and https://www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

Monte el soporte incluido:

Retire los 2 tornillos hexagonales que sostienen el soporte plano contra la parte posterior de la unidad. Los tornillos estn diseados para funcionar con una llave hexagonal de 2,5 mm, pero tambin puede utilizar un destornillador Torx T10 o una llave hexagonal SAE de 3/32 si se tiene cuidado de no pelar el tornillo.

D la vuelta al soporte para que sobresalga de la unidad. El soporte tiene almohadillas de goma para evitar que raye la superficie donde est colocado.

Vuelva a colocar los tornillos en los mismos orificios para asegurar el soporte.

Conecte la unidad a la alimentacin de CA.

Utilice un cable TOS estndar (no incluido) para conectar un dispositivo de audio

digital externo.

Utilice el cable SUB-D-15 (incluido) para conectar un dispositivo de audio

digital externo.

Mantenga pulsado el botn de la derecha para encender la unidad.

Medicin enchufable

a. Descargue el instalador del complemento CLARITY M de tcelectronic. com/clarity-m/support.

b. Siga las instrucciones de instalacin.

c. Conecte la unidad a su computadora a travs de USB.

d. En su software DAW, inserte el complemento CLARITY M en el lugar que desea monitorear. Puede ser una pista normal, un bus, un bus auxiliar o una salida maestra.

e. En CLARITY M, vaya al men Sistema (SYS) y configure el Modo USB en "Plug-in".

En la unidad, use el men Sistema> Entradas para seleccionar la

entrada apropiada.

Utilice Sistema> Carpeta preestablecida para configurar su regin para los

estndares de sonoridad adecuados.

Use Library (Lib) para seleccionar un preset apropiado y presione EXIT.

Utilice el interruptor RTA / RADAR / VSCOPE para alternar entre Radar, RTA y

Vector Scope.

Nota: un manual completo est disponible en formato PDF, descrguelo en https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L y https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

26 27Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Getting started (FR) Mise en oeuvre (DE) Erste SchritteMontez le support inclus:

Retirez les 2 vis hexagonales qui maintiennent le support plat contre larrire de lunit. Les vis sont conues pour fonctionner avec une cl hexagonale de 2,5 mm, mais vous pouvez galement utiliser un tournevis Torx T10 ou une cl hexagonale 3/32 SAE si lon prend soin de ne pas dnuder la vis.

Retournez le support pour quil dpasse de lunit. Le support a des coussinets en caoutchouc pour lempcher de rayer la surface o il est plac.

Remettez les vis dans les mmes trous pour fixer le support.

Connectez lunit lalimentation secteur.

Utilisez un cble TOS standard (non inclus) pour connecter un priphrique audio

numrique externe.

Utilisez le cble SUB-D-15 (inclus) pour connecter un appareil audio

numrique externe.

Maintenez le bouton le plus droite pour allumer lappareil.

Mesure enfichable

a. Tlchargez le programme dinstallation du plug-in CLARITY M sur tcelectronic. com/clarity-m/support.

b. Suivez les instructions dinstallation.

c. Connectez lappareil votre ordinateur via USB.

d. Dans votre logiciel DAW, insrez le plug-in CLARITY M lendroit que vous souhaitez surveiller. Cela peut tre une piste normale, un bus, un bus auxiliaire ou une sortie principale.

e. Dans CLARITY M, accdez au menu Systme (SYS) et rglez le mode USB sur Plug-in.

Dans lunit, utilisez le menu Systme> Entres pour slectionner

lentre approprie.

Utilisez Systme> Dossier de prrglage pour dfinir votre rgion pour les normes de

sonie appropries.

Utilisez Library (Lib) pour slectionner un prrglage appropri et appuyez sur EXIT.

Utilisez le commutateur RTA / RADAR / VSCOPE pour basculer entre Radar, RTA et

Vector Scope.

Noter - un manuel complet est disponible au format PDF, tlcharger sur https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L et https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

Montieren Sie den mitgelieferten Stnder:

Entfernen Sie die 2 Sechskantschrauben, mit denen der Stnder flach an der Rckseite des Gerts anliegt. Die Schrauben knnen mit einem 2,5-mm-Inbusschlssel betrieben werden. Sie knnen jedoch auch einen T10-Torx-Schraubendreher oder einen 3/32 SAE-Inbusschlssel verwenden, wenn Sie darauf achten, die Schraube nicht zu entfernen.

Drehen Sie den Stnder so, dass er vom Gert nach auen ragt. Der Stnder verfgt ber Gummipads, um zu verhindern, dass er die Oberflche zerkratzt, auf der er platziert ist.

Setzen Sie die Schrauben wieder in die gleichen Lcher ein, um den Stnder zu sichern.

Schlieen Sie das Gert an das Stromnetz an. Verwenden Sie ein Standard- TOS-Kabel (nicht im Lieferumfang enthalten),

um ein externes digitales Audiogert anzuschlieen.

Verwenden Sie das mitgelieferte SUB-D-15-Kabel, um ein externes digitales

Audiogert anzuschlieen.

Halten Sie die Taste ganz rechts gedrckt, um das Gert einzuschalten.

Plug-in-Messung

a. Laden Sie das CLARITY M-Plug-In- Installationsprogramm von tcelectronic.com/clarity-m/ support herunter.

b. Befolgen Sie die Installationsanweisungen.

c. Schlieen Sie das Gert ber USB an Ihren Computer an.

d. Fgen Sie in Ihrer DAW-Software das CLARITY M-Plug-In an der Stelle ein, die Sie berwachen mchten. Dies kann eine normale Spur, ein Bus, ein Aux-Bus oder ein Master-Ausgang sein.

e. Gehen Sie in CLARITY M zum System (SYS) -Men und stellen Sie den USB-Modus auf Plug-in.

Verwenden Sie im Gert das Men System> Eingnge, um den entsprechenden

Eingang auszuwhlen.

Verwenden Sie System> Preset Folder, um Ihre Region auf geeignete

Lautstrkestandards einzustellen.

Whlen Sie mit Library (Lib) eine geeignete Voreinstellung aus und drcken Sie EXIT.

Use the RTA/RADAR/VSCOPE switch to toggle between Radar, RTA and Vector Scope.

Hinweis - Ein vollstndiges Handbuch ist als PDF verfgbar und kann unter heruntergeladen werden https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L und https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

28 29Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Getting started (PT) Primeiros Passos (IT) IniziareMonte o suporte includo:

Remova os 2 parafusos hexagonais que prendem o suporte contra a parte traseira da unidade. Os parafusos so projetados para serem operados com uma chave hexagonal de 2,5 mm, mas voc tambm pode usar uma chave Torx T10 ou uma chave hexagonal SAE 3/32 se tiver cuidado para no descascar o parafuso.

Vire o suporte para que fique para fora da unidade. O suporte possui almofadas de borracha para evitar arranhes na superfcie onde est colocado.

Recoloque os parafusos nos mesmos orifcios para prender o suporte.

Conecte a unidade alimentao CA.

Use um cabo TOS padro (no includo) para conectar um dispositivo de udio

digital externo.

Use o cabo SUB-D-15 (includo) para conectar um dispositivo de udio

digital externo.

Segure o boto da extrema direita para ligar a unidade.

Medio Plug-in

a. Baixe o instalador do plug-in CLARITY M em tcelectronic.com/ clarity-m/support.

b. Siga as instrues de instalao.

c. Conecte a unidade ao seu computador via USB.

d. Em seu software DAW, insira o plug-in CLARITY M no local que deseja monitorar. Pode ser uma faixa normal, um bus, um bus auxiliar ou uma sada master.

e. No CLARITY M, v para o menu Sistema (SYS) e defina o Modo USB como Plug-in.

Na unidade, use o menu Sistema> Entradas para selecionar a

entrada apropriada.

Use Sistema> Pasta predefinida para definir sua regio para os padres de

volume apropriados.

Use Biblioteca (Lib) para selecionar uma predefinio apropriada e pressione EXIT.

Use a chave RTA / RADAR / VSCOPE para alternar entre Radar, RTA e Escopo de vetor.

Observao - um manual completo est disponvel em PDF, faa o download em https://www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L e https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

Montare il supporto incluso:

Rimuovere le 2 viti esagonali che fissano il supporto piatto contro il retro dellunit. Le viti sono progettate per essere azionate con una chiave esagonale da 2,5 mm, ma anche possibile utilizzare un cacciavite Torx T10 o una chiave esagonale 3/32 SAE se si fa attenzione a non strappare la vite.

Capovolgere il supporto in modo che sporga dallunit. Il supporto dotato di cuscinetti in gomma per evitare che graffi la superficie su cui posizionato.

Riposizionare le viti negli stessi fori per fissare il supporto

Collegare lunit allalimentazione CA.

Utilizzare un cavo TOS standard (non incluso) per collegare un dispositivo audio

digitale esterno.

Utilizzare il cavo SUB-D-15 (incluso) per collegare un dispositivo audio

digitale esterno.

Tenere premuto il pulsante allestrema destra per accendere lunit.

Misurazione plug-in

a. Scarica il programma di installazione del plug-in CLARITY M da tcelectronic. com/clarity-m/support.

b. Segui le istruzioni di installazione.

c. Collega l'unit al computer tramite USB.

d. Nel software DAW, inserisci il plug-in CLARITY M nel punto che desideri monitorare. Pu essere una traccia normale, un bus, un aux-bus o un'uscita master.

e. In CLARITY M, vai al menu System (SYS) e imposta USB Mode su "Plug-in".

Nell'unit, utilizzare il menu Sistema> Ingressi per selezionare

l'ingresso appropriato.

Usa System> Preset Folder per impostare la tua regione per gli standard di

volume appropriati.

Usa Library (Lib) per selezionare un preset appropriato e premi EXIT.

Use the RTA/RADAR/VSCOPE switch to toggle between Radar, RTA and Vector Scope.

Nota - un manuale completo disponibile in formato PDF, scaricabile all'indirizzo https://www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L e https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

30 31Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Getting started (NL) Aan de slag (SE) Komma igngMonteer de meegeleverde

standaard:

Verwijder de 2 inbusschroeven waarmee de standaard plat tegen de achterkant van het apparaat is bevestigd. De schroeven zijn ontworpen om te worden bediend met een inbussleutel van 2,5 mm, maar u kunt ook een T10 Torx- schroevendraaier of een 3/32 SAE inbussleutel gebruiken als u erop let de schroef niet te strippen.

Draai de standaard om zodat deze naar buiten uit het apparaat steekt. De standaard heeft rubberen kussentjes om krassen op het oppervlak te voorkomen waar deze is geplaatst.

Plaats de schroeven terug in dezelfde gaten om de standaard vast te zetten.

Sluit het apparaat aan op wisselstroom. Gebruik een standaard TOS-kabel (niet meegeleverd) om een extern digitaal

audioapparaat aan te sluiten.

Gebruik de SUB-D-15-kabel (meegeleverd) om een extern digitaal audioapparaat aan

te sluiten.

Houd de uiterst rechtse knop ingedrukt om het apparaat in te schakelen.

Plug-in Metering

a. Download het installatieprogramma van de CLARITY M-plug-in van tcelectronic.com/ clarity-m/support.

b. Volg de installatie-instructies.

c. Verbind het apparaat via USB met uw computer.

d. Plaats in uw DAW-software de CLARITY M-plug-in op de plaats die u wilt monitoren. Dit kan een normale track, een bus, een aux-bus of een masteruitgang zijn.

e. Ga in CLARITY M naar het menu Systeem (SYS) en stel USB Mode in op "Plug-in".

Gebruik in het apparaat het menu Systeem> Ingangen om de juiste ingang te selecteren.

Gebruik Systeem> Vooraf ingestelde map om uw regio in te stellen voor de juiste

luidheidsstandaarden.

Gebruik Library (Lib) om een geschikte preset te selecteren en druk op EXIT.

Gebruik de RTA / RADAR / VSCOPE-schakelaar om te wisselen tussen Radar, RTA en

Vector Scope.

Notitie - een volledige handleiding is beschikbaar als pdf, download op https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L en https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

Montera det medfljande stativet:

Ta bort de tv sexkantskruvarna som hller stativet plant mot enhetens baksida. Skruvarna r konstruerade fr att manvreras med en 2,5 mm insexnyckel, men du kan ocks anvnda en T10 Torx-drivenhet eller en 3/32 SAE-insexnyckel om du r frsiktig s att du inte tar bort skruven.

Vnd stativet s att det sticker ut frn enheten. Stativet har gummikuddar fr att frhindra att det repas p ytan dr det placeras.

Stt tillbaka skruvarna i samma hl fr att skra stativet.

Anslut enheten till ntstrm.

Anvnd en vanlig TOS-kabel (ingr ej) fr att ansluta en extern digital ljudenhet.

Anvnd SUB-D-15-kabeln (ingr) fr att ansluta en extern digital ljudenhet.

Hll knappen lngst till hger fr att sl p enheten.

Plug-in mtning

a. Ladda ner installationsprogrammet fr CLARITY M frn tcelectronic.com/ clarity-m/support.

b. Flj installationsanvisningarna.

c. Anslut enheten till din dator via USB.

d. I din DAW-programvara stter du in CLARITY M-plugin-programmet p den plats du vill vervaka. Detta kan vara ett normalt spr, en buss, en aux-buss eller en huvudutgng.

e. I CLARITY M, g till System (SYS) -menyn och stll USB-lget till Plug-in.

I enheten anvnder du System-menyn> Ingngar fr att vlja lmplig ingng.

Anvnd System> Frinstlld mapp fr att stlla in din region fr lmpliga ljudstyrkor.

Anvnd Library (Lib) fr att vlja en lmplig frinstllning och tryck p EXIT.

Anvnd RTA / RADAR / VSCOPE-omkopplaren fr att vxla mellan Radar, RTA och

Vector Scope.

Notera - en fullstndig manual finns som PDF, ladda ner p https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L och https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

32 33Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M/CLARITY M STEREO Getting started (PL) Pierwsze kroki Zamontuj doczon

podstawk:

Odkr 2 ruby szecioktne mocujce stojak pasko do tylnej czci urzdzenia. ruby s zaprojektowane do obsugi za pomoc klucza imbusowego 2,5 mm, ale mona rwnie uy klucza szecioktnego T10 Torx lub klucza imbusowego 3/32 SAE, jeli nie zostanie zdjta ruba.

Odwr podstawk tak, aby wystawaa z urzdzenia. Stojak posiada gumowe podkadki, ktre zapobiegaj zarysowaniu powierzchni, na ktrej jest postawiony.

Wkr ruby w te same otwory, aby zabezpieczy stojak.

Podcz urzdzenie do zasilania sieciowego. Uyj standardowego kabla TOS (brak w zestawie), aby podczy zewntrzne

cyfrowe urzdzenie audio.

Uyj kabla SUB-D-15 (w zestawie), aby podczy zewntrzne cyfrowe

urzdzenie audio.

Przytrzymaj skrajny prawy przycisk, aby wczy urzdzenie.

Pomiar wtyczkowy

a. Pobierz instalator wtyczki CLARITY M ze strony tcelectronic.com/ clarity-m/support.

b. Postpuj zgodnie z instrukcjami instalacji.

c. Podcz urzdzenie do komputera przez USB.

d. W swoim oprogramowaniu DAW w wtyczk CLARITY M w miejscu, ktre chcesz monitorowa. Moe to by zwyka cieka, szyna, szyna aux lub wyjcie gwne.

e. W CLARITY M przejd do menu System (SYS) i ustaw Tryb USB na Plug-in.

W urzdzeniu uyj menu System> Wejcia, aby wybra odpowiednie wejcie.

Uyj System> Preset Folder, aby ustawi region dla odpowiednich

standardw gonoci.

Uyj Library (Lib), aby wybra odpowiednie ustawienie wstpne i nacinij EXIT.

. Uyj przecznika RTA / RADAR / VSCOPE, aby przecza si midzy

radarem, RTA i Vector Scope.

Uwaga - pena instrukcja jest dostpna w formacie PDF, do pobrania pod adresem https://www.tcelectronic.com/tcelectronic/ product?modelCode=P0D9L i https:// www.tcelectronic.com/tcelectronic/ product?modelCode=P0DC8

Specifications 34 35Quick Start GuideCLARITY M/CLARITY M STEREO

CLARITY M CLARITY M STEREO Connections

Digital audio inputs

Input 1 BNC (AES3id, S/PDIF) Input 1 BNC (AES3id, S/PDIF)

Input 2 BNC (AES3id, S/PDIF) Input 2 TOSLINK (EIAJ optical)

Input 3 BNC (AES3id, S/PDIF)

Input 4 TOSLINK (EIAJ optical)

GPIO

2 external switch inputs, 1 relay output (100 mA max, optically isolated) 1/8" mono female (GPO) " stereo female (2x GPI)

2 external switch inputs, 1 relay output (100 mA max, optically isolated) 1/8" mono female (GPO) " stereo female (2x GPI)

USB USB 2.0 (Micro type B) USB 2.0 (Micro type B) Display and Controls

User controls Rotary encoder, 6 selection buttons Rotary encoder, 6 selection buttons

Display 7" TFT color 800 x 480 7" TFT color 800 x 480 Power

Power Consumption 12 V DC, 0.5 A 12 V DC, 0.5 A Physical

Dimensions (H x W x D) 140 x 182 x 38 mm (5.5 x 7.2 x 1.5") 140 x 182 x 38 mm (5.5 x 7.2 x 1.5")

Weight 1.2 kg (2.6 lbs) 1.2 kg (2.6 lbs) Accessories

Included Accessories

2.5 mm HEX key 2.5 mm HEX key

AC adapter AC adapter

DB15 cable assembly DB15 cable assembly

BNC female to RCA male adapter BNC female to RCA male adapter, BNC female to XLR female adapter

USB cable type A male to micro B male, 1 m long

USB cable type A male to micro B male, 1 m long

Compliance

Compliance with all worldwide standards Compliance with all worldwide standards

ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59

ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59

Other important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under Support at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

1. Registro online. Le recomendamos que registre su nuevo aparato Music Tribe justo despus de su compra accediendo a la pgina web musictribe.com. El registro de su compra a travs de nuestro sencillo sistema online nos ayudar a resolver cualquier incidencia que se presente a la mayor brevedad posible. Adems, aproveche para leer los trminos y condiciones de nuestra garanta, si es aplicable en su caso.

2. Averas. En el caso de que no exista un distribuidor Music Tribe en las inmediaciones, puede ponerse en contacto con el distribuidor Music Tribe de su pas, que encontrar dentro del apartado Support de nuestra pgina web musictribe.com. En caso de que su pas no aparezca en ese listado, acceda a la seccin Online Support (que tambin encontrar dentro del apartado Support de nuestra pgina web) y compruebe si su problema aparece descrito y solucionado all. De forma alternativa, envenos a travs de la pgina web una solicitud online de soporte en periodo de garanta ANTES de devolvernos el aparato.

3. Conexiones de corriente. Antes de enchufar este aparato a una salida de corriente, asegrese de que dicha salida sea del voltaje adecuado para su modelo concreto. En caso de que deba sustituir un fusible quemado, deber hacerlo por otro de idnticas especificaciones, sin excepcin.

1. Enregistrez-vous en ligne. Prenez le temps denregistrer votre produit Music Tribe aussi vite que possible sur le site Internet musictribe.com. Le fait denregistrer le produit en ligne nous permet de grer les rparations plus rapidement et plus efficacement. Prenez galement le temps de lire les termes et conditions de notre garantie.

2. Dysfonctionnement. Si vous navez pas de revendeur Music Tribe prs de chez vous, contactez le distributeur Music Tribe de votre pays : consultez la liste des distributeurs de votre pays dans la page Support de notre site Internet musictribe.com. Si votre pays nest pas dans la liste, essayez de rsoudre votre problme avec notre aide en ligne que vous trouverez galement dans la section Support du site musictribe.com. Vous pouvez galement nous faire parvenir directement votre demande de rparation sous garantie par Internet sur le site musictribe.com AVANT de nous renvoyer le produit.

3. Raccordement au secteur. Avant de relier cet quipement au secteur, assurez-vous que la tension secteur de votre rgion soit compatible avec lappareil. Veillez remplacer les fusibles uniquement par des modles exactement de mme taille et de mme valeur lectrique sans aucune exception.

Important information Aspectos importantes Informations importantes

1. Online registrieren. Bitte registrieren Sie Ihr neues Music Tribe-Gert direkt nach dem Kauf auf der Website musictribe.com. Wenn Sie Ihren Kauf mit unserem einfachen online Formular registrieren, knnen wir Ihre Reparaturansprche schneller und effizienter bearbeiten. Lesen Sie bitte auch unsere Garantiebedingungen, falls zutreffend.

2. Funktionsfehler. Sollte sich kein Music Tribe Hndler in Ihrer Nhe befinden, knnen Sie den Music Tribe Vertrieb Ihres Landes kontaktieren, der auf musictribe.com unter Support aufgefhrt ist. Sollte Ihr Land nicht aufgelistet sein, prfen Sie bitte, ob Ihr Problem von unserem Online Support gelst werden kann, den Sie ebenfalls auf musictribe.com unter Support finden. Alternativ reichen Sie bitte Ihren Garantieanspruch online auf musictribe.com ein, BEVOR Sie das Produkt zurcksenden.

3. Stromanschluss. Bevor Sie das Gert an eine Netzsteckdose anschlieen, prfen Sie bitte, ob Sie die korrekte Netzspannung fr Ihr spezielles Modell verwenden. Fehlerhafte Sicherungen mssen ausnahmslos durch Sicherungen des gleichen Typs und Nennwerts ersetzt werden.

1. Registre-se online. Por favor, registre seu novo equipamento Music Tribe logo aps a compra visitando o site musictribe.com Registrar sua compra usando nosso simples formulrio online nos ajuda a processar seus pedidos de reparos com maior rapidez e eficincia. Alm disso, leia nossos termos e condies de garantia, caso seja necessrio.

2. Funcionamento Defeituoso. Caso seu fornecedor Music Tribe no esteja localizado nas proximidades, voc pode contatar um distribuidor Music Tribe para o seu pas listado abaixo de Suporte em musictribe.com. Se seu pas no estiver na lista, favor checar se seu problema pode ser resolvido com o nosso Suporte Online que tambm pode ser achado abaixo de Suporteem musictribe.com. Alternativamente, favor enviar uma solicitao de garantia online em musictribe.com ANTES da devoluo do produto.

3. Ligaes. Antes de ligar a unidade tomada, assegure-se de que est a utilizar a voltagem correcta para o modelo em questo. Os fusveis com defeito tero de ser substitudos, sem qualquer excepo, por fusveis do mesmo tipo e corrente nominal.

1. Registratevi online. Vi invitiamo a registrare il nuovo apparecchio Music Tribe subito dopo averlo acquistato visitando musictribe.com. La registrazione dellacquisto tramite il nostro semplice modulo online ci consente di elaborare le richieste di riparazione in modo pi rapido ed efficiente. Leggete anche i termini e le condizioni della nostra garanzia, qualora applicabile.

2. Malfunzionamento. Nel caso in cui il rivenditore autorizzato Music Tribe non si trovi nelle vostre vicinanze, potete contattare il Music Tribe Authorized Fulfiller per il vostro paese, elencato in Support @ musictribe.com. Se la vostra nazione non elencata, controllate se il problema pu essere risolto tramite il nostro Online Supportche pu anche essere trovato sotto Support @ musictribe.com. In alternativa, inviate una richiesta di garanzia online su musictribe.com PRIMA di restituire il prodotto.

3. Collegamento allalimentazione. Prima di collegare lunit a una presa di corrente, assicuratevi di utilizzare la tensione di rete corretta per il modello specifico. I fusibili guasti devono essere sostituiti, senza eccezioni, con fusibili dello stesso tipo e valore nominale.

Weitere wichtige Informationen

Outras Informaes Importantes Informazioni importanti

36 37Quick Start GuideCLARITY M/CLARITY M STEREO

Other important information

1. Registreer online. Registreer uw nieuwe Music Tribe-apparatuur direct nadat u deze hebt gekocht door naar musictribe.com te gaan. Door uw aankoop te registreren via ons eenvoudige online formulier, kunnen wij uw reparatieclaims sneller en efficinter verwerken. Lees ook de voorwaarden van onze garantie, indien van toepassing.

2. Storing. Mocht uw door Music Tribe geautoriseerde wederverkoper niet bij u in de buurt zijn gevestigd, dan kunt u contact opnemen met de door Music Tribe Authorized Fulfiller voor uw land vermeld onder Support op musictribe.com. Als uw land niet in de lijst staat, controleer dan of uw probleem kan worden opgelost door onze "Online Support", die u ook kunt vinden onder "Support" op musictribe.com. U kunt ook een online garantieclaim indienen op musictribe.com VOORDAT u het product retourneert.

3. Stroomaansluitingen. Voordat u het apparaat op een stopcontact aansluit, moet u ervoor zorgen dat u de juiste netspanning voor uw specifieke model gebruikt. Defecte zekeringen moeten zonder uitzondering worden vervangen door zekeringen van hetzelfde type en dezelfde waarde.

1. Registrera online. Registrera din nya Music Tribe-utrustning direkt efter att du kpt den genom att beska musictribe.com. Att registrera ditt kp med vrt enkla onlineformulr hjlper oss att behandla dina reparationsansprk snabbare och mer effektivt. Ls ocks villkoren i vr garanti, om tillmpligt.

2. Fel. Om din Music Tribe- auktoriserade terfrsljare inte finns i din nrhet kan du kontakta Music Tribe Authorized Fulfiller fr ditt land listat under Support p musictribe.com. Om ditt land inte r listat, kontrollera om ditt problem kan hanteras av vr Onlinesupport som ocks finns under Support p musictribe.com. Alternativt kan du skicka in ett online-garantiansprk p musictribe.com INNAN du returnerar produkten.

3. Strmanslutningar. Innan du ansluter enheten till ett eluttag, se till att du anvnder rtt ntspnning fr just din modell. Felaktiga skringar mste bytas ut mot skringar av samma typ och mrkning utan undantag.

1. Zarejestrowa online. Zarejestruj swj nowy sprzt Music Tribe zaraz po zakupie na stronie musictribe. com. Zarejestrowanie zakupu za pomoc naszego prostego formularza online pomaga nam szybciej i efektywniej rozpatrywa roszczenia dotyczce naprawy. Przeczytaj rwnie warunki naszej gwarancji, jeli dotyczy.

2. Awaria. Jeli Twj autoryzowany sprzedawca Music Tribe nie znajduje si w pobliu, moesz skontaktowa si z autoryzowanym dostawc Music Tribe dla swojego kraju, wymienionym w sekcji Wsparcie na stronie musictribe. com. Jeli Twojego kraju nie ma na licie, sprawd, czy Twj problem moe zosta rozwizany przez nasze Wsparcie online, ktre mona rwnie znale w sekcji Wsparcie na stronie musictribe. com. Alternatywnie, przelij zgoszenie gwarancyjne online na musictribe.com PRZED zwrotem produktu.

3. Poczenia zasilania. Przed podczeniem urzdzenia do gniazdka sieciowego upewnij si, e uywasz odpowiedniego napicia sieciowego dla danego modelu. Wadliwe bezpieczniki naley bez wyjtku wymieni na bezpieczniki tego samego typu i wartoci.

Belangrijke informatie Viktig information Wana informacja

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

CLARITY M/CLARITY M STEREO This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the users authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/E

Manualsnet FAQs

If you want to find out how the Clarity M TC Electronic works, you can view and download the TC Electronic Clarity M Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for TC Electronic Clarity M as well as other TC Electronic manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a TC Electronic Clarity M. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the TC Electronic Clarity M Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This TC Electronic Clarity M Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download TC Electronic Clarity M Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print TC Electronic Clarity M Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the TC Electronic Clarity M Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.