Contents

Synology DS212j v9 User's Guide PDF

1 of 182
1 of 182

Summary of Content for Synology DS212j v9 User's Guide PDF

Synology DiskStation User's Guide

Based on DSM 4.1

Document ID Syno_UsersGuide_DS_20121106

2

Table of Contents

Chapter 1: Introduction

Chapter 2: Get Started with Synology DiskStation Manager Install Synology DiskStation .................................................................................................................................................. 7 Log in to Synology DiskStation Manager ............................................................................................................................. 7 DiskStation Manager Appearance ...................................................................................................................................... 10 Manage DSM with the Main Menu ..................................................................................................................................... 12 Manage Personal Options ................................................................................................................................................... 14

Chapter 3: Modify System Settings Change DSM Settings .......................................................................................................................................................... 16 Change Network Settings .................................................................................................................................................... 19 Modify Regional Options ...................................................................................................................................................... 22 Use Energy Saving Features .............................................................................................................................................. 24

Chapter 4: Manage Storage Space What is Volume and Disk Group? ....................................................................................................................................... 27 Manage Volumes or Disk Groups with Storage Manager ............................................................................................... 28 Manage iSCSI Target with Storage Manager ................................................................................................................... 34 Manage iSCSI LUNs with Storage Manager ..................................................................................................................... 36 Manage Hard Disks with Storage Manager ....................................................................................................................... 38 SSD Cache ............................................................................................................................................................................ 39 Manage External Disks ........................................................................................................................................................ 39

Chapter 5: Access your DiskStation from the Internet Use the EZ-Internet Wizard ................................................................................................................................................. 41 Set Up Port Forwarding Rules for Router .......................................................................................................................... 41 Register DDNS for DiskStation ........................................................................................................................................... 43 Access DSM Services via QuickConnect .......................................................................................................................... 44 Set up VPN Connection ....................................................................................................................................................... 46

Chapter 6: Enhance Internet Security Prevent Unauthorized Connection with Firewall ............................................................................................................... 47 Control the Outgoing Traffic of Services ............................................................................................................................ 48 Automatically Block Suspicious Login Attempts ............................................................................................................... 49

Chapter 7: Set Up File Sharing Enable File Sharing Protocols for All Platforms ................................................................................................................ 51 Join DiskStation to Directory Service ................................................................................................................................. 53 Host LDAP Service with Directory Server ......................................................................................................................... 55 Manage Users and Groups.................................................................................................................................................. 55 Set Up Shared Folders ......................................................................................................................................................... 60 Define Windows ACL Privileges for Shared Folder .......................................................................................................... 64

3 Table of Contents

Index Shared Folder Contents ............................................................................................................................................ 65

Chapter 8: Access Files from Anywhere Access Files within the Intranet........................................................................................................................................... 67 Access Files via FTP ............................................................................................................................................................ 70 Access Files via WebDAV ................................................................................................................................................... 71 Sync Files via Cloud Station ................................................................................................................................................ 72 Access Files via File Station ................................................................................................................................................ 73

Chapter 9: Back Up Data Back Up Computer Data ...................................................................................................................................................... 81 Back up Data or iSCSI LUN on Synology DiskStation ..................................................................................................... 82 Sync Shared Folder Contents between DiskStations ...................................................................................................... 85 Backup DiskStation Data with Time Backup ..................................................................................................................... 87 Back up Data on USB Device or SD Card......................................................................................................................... 88

Chapter 10: Host Websites, Email Server, and Print Server Use Web Station to Host Websites .................................................................................................................................... 89 Host Mail Server .................................................................................................................................................................... 92 Set Synology DiskStation as Print Server ......................................................................................................................... 94

Chapter 11: Discover Various Applications with Package Center What Package Center Offers .............................................................................................................................................. 97 Manage Packages ................................................................................................................................................................ 97 Configure Package Center .................................................................................................................................................. 98

Chapter 12: Share Photos, Videos, and Blogs with Photo Station Install Photo Station ............................................................................................................................................................ 100 Enable Personal Photo Station ......................................................................................................................................... 101 Manage Photo Station User Accounts ............................................................................................................................. 102 Create, Manage, and View Albums, Photos, and Videos.............................................................................................. 103 Share with Social Networks ............................................................................................................................................... 107 Browse Photos and Videos with Timeline ....................................................................................................................... 108 Manage Tags for Photos .................................................................................................................................................... 108 Perform Face Recognition ................................................................................................................................................. 109 Customize Album Layout ................................................................................................................................................... 109 Use the Blog ........................................................................................................................................................................ 110

Chapter 13: Play Music with Audio Station Install Audio Station ............................................................................................................................................................ 112 Choose Audio Source......................................................................................................................................................... 113 Organize Your Music .......................................................................................................................................................... 115 Play Music ............................................................................................................................................................................ 119 Download Music .................................................................................................................................................................. 122

Chapter 14: Organize Videos and Record TV Programs with Video Station Install Video Station ............................................................................................................................................................ 123 Categorize Your Videos ..................................................................................................................................................... 124 Manage Video Metadata .................................................................................................................................................... 126 Record TV Programs .......................................................................................................................................................... 127

4 Table of Contents

Live Stream TV Programs.................................................................................................................................................. 128

Chapter 15: Download Files with Download Station Install Download Station ..................................................................................................................................................... 130 Manage Auto Extract Service ............................................................................................................................................ 131 Set up BT/HTTP/FTP/NZB ................................................................................................................................................ 132 Create BT/HTTP/FTP/NZB Download Tasks .................................................................................................................. 135 Manage BT/HTTP/FTP/NZB Download Tasks ............................................................................................................... 138 Set up eMule ........................................................................................................................................................................ 139 Connect to ED2K Server/Kad ............................................................................................................................................ 142 Create eMule Download Tasks ......................................................................................................................................... 143 Manage eMule Download Tasks ....................................................................................................................................... 144

Chapter 16: Safeguard Your Environment with Surveillance Station Install Surveillance Station ................................................................................................................................................. 146 Manage IP Cameras ........................................................................................................................................................... 147 Watch Live View .................................................................................................................................................................. 148 Work with Timeline .............................................................................................................................................................. 150 Play and Manage Events ................................................................................................................................................... 151 Manage Notification Settings ............................................................................................................................................. 152 Use E-Map ........................................................................................................................................................................... 153 Manage Advanced Settings ............................................................................................................................................... 153 Assign Privileges ................................................................................................................................................................. 155 Install Camera License ....................................................................................................................................................... 155 View Log ............................................................................................................................................................................... 156

Chapter 17: Manage Media Server and iTunes Service Install DLNA Media Server ................................................................................................................................................ 157 Manage DLNA Media Server ............................................................................................................................................ 157 Install iTunes Server ........................................................................................................................................................... 160 Manage iTunes Server ....................................................................................................................................................... 160

Chapter 18: Perform Advanced Management Tasks Check System Information ................................................................................................................................................. 162 View System Logs .............................................................................................................................................................. 164 Monitor System Resources ................................................................................................................................................ 165 Update DSM ........................................................................................................................................................................ 166 Receive Event Notifications ............................................................................................................................................... 168 Access Applications with Independent Login .................................................................................................................. 170 Index Multimedia Files for Applications ............................................................................................................................ 171 Reset admin's Password .................................................................................................................................................... 172 Restore Synology DiskStation to Factory Defaults......................................................................................................... 172 Reinstall Synology DiskStation ......................................................................................................................................... 172 Enable SNMP Service ........................................................................................................................................................ 173 Enable Terminal Services .................................................................................................................................................. 174

Chapter 19: Communicate with Mobile Devices Manage DSM Settings with DSM mobile ......................................................................................................................... 175 Use iOS, Android, and Windows Apps ............................................................................................................................ 175 Use Other Mobile Devices ................................................................................................................................................. 176

5

Chapter

1 Chapter 1: Introduction

Congratulations on your purchase of Synology DiskStation. Synology DiskStation is a multi-functional Network- Attached Storage server, serving as a file-sharing center within your Intranet. Moreover, it is specially designed for a variety of purposes, allowing you to perform the following tasks with the web-based Synology DiskStation Manager (DSM):

Store and Share Files over the Internet Windows users, Mac users, and Linux users can easily share files within the Intranet or through the Internet. Unicode language support makes sharing files in different languages from Synology DiskStation simple.

Manage Files with Web-Based File Station One of Synology DiskStation Managers applications, File Station, can make it possible for users to manage their files on Synology DiskStation easily through a web interface. You can also access the files stored on Synology DiskStation with a mobile device.

Transfer Files via FTP Synology DiskStation provides FTP service with bandwidth restriction and anonymous login. To transfer data safely, FTP over SSL/TLS and uninvited IP auto-block are also available.

Sync Files with Cloud Station Cloud Station is a file sharing service that allows your DiskStation to become a file sync center to sync files between multiple client computers. With the Cloud Station application installed on your computers, you can simply drop your office file to a folder on your office computer, and then open the same file automatically synced to your laptop.

Share Storage Capacity as iSCSI LUNs You can designate portion of your Synology DiskStation volume space to be an iSCSI LUN, which will allow the iSCSI initiator to access the space like a local disk.

Back Up Files on Computer and Server Synology DiskStation provides various backup solutions to back up computer data to Synology DiskStation, back up Synology DiskStation data or iSCSI LUN to an external hard drive, another Synology DiskStation, an rsync- compatible server, Amazon S3 server, HiDrive backup server, etc.

Enjoy Entertainment Content on the Server Download Station allows you to download files from the Internet through BT, FTP, HTTP, eMule and NZB to Synology DiskStation. The Media Server and iTunes support allows computers or DMA devices within LAN to playback multimedia files on Synology DiskStation1

With the USBCopy or SDCopy function, you can press the Copy button on your DiskStation to instantly copy files from a camera or SD card to Synology DiskStation.

.

2

--------- 1 For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit

www.synology.com. 2 USBCopy or SDCopy is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

6 Chapter 1: Introduction

Organize Videos with Video Station Video Station allows you to organize your collection of movies, TV shows, and home videos into a media platform on which you can watch and play video clips, live stream and record digital TV programs with a USB DTV dongle plugged into your Synology DiskStation, view and edit video metadata whose information is retrieved automatically from the Internet. You can also stream videos to your iPhone or iPad for playback.

Share Photos, Videos, and Blogs with Photo Station Photo Station gives you the freedom to share photos and videos over the Internet without complicated upload steps. Album control ensures the content is shared with the right persons. Visitors can leave comments for your photos. Furthermore, a brand new blogging system is integrated for you to easily share your life and thoughts over the Internet.

Enjoy Music Anytime and Anywhere Audio Station allows you to listen to music stored on the Synology DiskStation, from a connected iPod, or even stream Internet Radio stations. In addition, you can stream music from the Synology DiskStation with a web browser over the Internet.

Host Websites The Virtual Host feature allows you to host up to 30 websites using Web Station, with PHP and MySQL supported.

Record Videos with IP Cameras Surveillance Station allows you to manage, view, and record videos from multiple IP cameras over the network. By accessing the web-based management interface of Surveillance Station, you can watch the real-time image the camera is monitoring, and record videos continuously, in motion-detection mode, or in alarm-recording mode.

Discover More Apps with Package Center Package Center brings intuitiveness and convenience for users to easily install and update a variety of applications (which are packed into packages). Just browse all available applications and select the ones that best suit your needs. All can be done with just a few clicks.

USB Print Server USB printers connected to your DiskStation can be shared by client computers over the local area network. AirPrint support allows you to print to the printer from an iOS device, while Google Cloud Print support allows you to print to the printer when you are using Google products and services.1

Online Resources

Click on the links to obtain Synology's online resources.

FAQ: www.synology.com/support/faq.php Wiki: forum.synology.com/wiki Forum: forum.synology.com Download Center: www.synology.com/support/download.php Technical Support: www.synology.com/support/support_form.php

--------- 1 For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit www.synology.com.

7

Chapter

2 Chapter 2: Get Started with Synology DiskStation Manager

This chapter explains how to log in to Synology DiskStation's web-based management UI, Synology DiskStation Manager (DSM), customize your own desktop, manage its taskbar and widgets, and use the Main Menu to access DSM settings and applications.

Install Synology DiskStation For more information about setting up Synology DiskStation and installing DSM, see the Quick Installation Guide that came with your installation disc.

Log in to Synology DiskStation Manager You can log in to DSM with Synology Assistant or with a web browser.

Use Synology Assistant Windows User: 1 Insert the installation disc into your computer, and click Start. Follow the onscreen instructions to complete the

setup process.

2 Synology Assistant will be installed and launched on your computer.

Synology DiskStation User's Guide

Based on DSM 4.1

8 Chapter 2: Get Started with Synology DiskStation Manager

3 Choose the server you want to manage. Click Connect or double-click the selected server to go to DSM's login screen.

4 Enter your user name and password, and click Login. The default password for admin is empty. If you want to save your login information and log in automatically next time, tick Remember me before logging in.

Mac OS X User: 1 Insert the installation disc into your computer, and then double-click the SynologyInstall icon on the desktop.

2 In the window that appears, double-click the MacOSX folder, and then double-click Synology Assistant- [number].dmg.

3 Double-click the Synology Assistant.app in the window that appears.

4 Follow step 3 to 4 of the Windows User section to log in to DSM.

Synology DiskStation User's Guide

Based on DSM 4.1

9 Chapter 2: Get Started with Synology DiskStation Manager

Linux (Ubuntu) User: 1 Insert the installation disc into your computer, and then double-click the SynologyInstall icon on the desktop.

2 In the File Browser window that appears, double-click the Linux folder, and then double-click Synology Assistant-[number].tar.gz.

3 Click Extract, and then extract the SynologyAssistant directory to the path /usr/local or any other path.

4 Go to the path /usr/local/SynologyAssistant (or [the path you just specified]/SynologyAssistant), double- click SynologyAssistant, and then select Run in Terminal in the dialog box that appears.

5 Follow step 3 to 4 of the Windows User section to log in to DSM.

4.1-2630

4.1-2630

4.1-2630

Synology DiskStation User's Guide

Based on DSM 4.1

10 Chapter 2: Get Started with Synology DiskStation Manager

Use a Web Browser 1 Open a web browser window, enter any of the following in the address field, and then press Enter on your

keyboard:

http://Synology_Server_IP:5000 http://Synology_Server_Name:5000/ (or http://Synology_Server_Name.local:5000/ on a Mac) Synology_Server_Name should be replaced with the name you set up for Synology DiskStation during the setup process. If you choose One-step Setup during the setup process, the Synology_Server_Name will be DiskStation, CubeStation, USBStation, or RackStation.

2 Enter your user name and password, and click Login. The default password for admin is empty. If you want to save your login information and log in automatically next time, tick Remember me before logging in.

Note: To ensure your connection to DSM runs smoothly, please use the following browsers.

Chrome Firefox Safari: 5.0 or later Internet Explorer: 8.0 or later

DiskStation Manager Appearance When you log in to Synology DiskStation Manager (DSM), you can see the desktop, taskbar and widgets.

Desktop and Shortcuts The desktop is where your application windows are displayed. You can also create desktop shortcuts to frequently used applications.

Synology DiskStation User's Guide

Based on DSM 4.1

11 Chapter 2: Get Started with Synology DiskStation Manager

To create a desktop shortcut to an application: Drag its thumbnail from the Main Menu to the desktop.

To remove a desktop shortcut to an application: Right-click the shortcut and choose Remove shortcut.

To open Synology-designed or third-party applications (available at Package Center) in a new browser window: Right-click the applications' Main Menu thumbnail or desktop shortcut and choose Open in New Window.

Note: You can also customize your desktop background color or wallpaper with the Desktop function. See "Desktop" on Page 14 for more information.

Taskbar The taskbar at the top of the desktop contains the following functions:

1 The Show Desktop button: Click to clear your application windows and reveal the desktop. Click again to bring the windows back to the desktop. For more information about application windows, see "Open Application Windows" on Page 13.

2 The Main Menu button: Click to reveal the Main Menu.See "Manage DSM with the Main Menu" on Page 12 for more information.

3 The icons of open applications: Click the icon of an application to show or hide its window on the desktop. Right-click the icon and choose from the shortcut menu to manage the application window (Maximize,

Minimize, Restore, Close) or its taskbar icon (Pin to Taskbar, Unpin from Taskbar). 4 The Notifications button (with an exclamation mark): Click to check the logs of important events.

Clear All: Click to remove all events and hide the Notification button. Show All: Click to see all notifications in another window. (Number) unread: If there are more than 30 unread notifications, (Number) unread will appear instead of

Show All to notify you of how many notifications have not been read. Click to see all notifications in another window.

Note: For more information about system log, see "View System Logs" on Page 164.

5 The Options menu: Click to manage your user account settings or leave DSM. Options: Click to manage personal options for your DSM users. See Manage Personal Options on Page

14 for more information. Logout: Click to exit your current account and return to login screen.

6 The Search icon: Click to enter keywords in the search field to quickly find a list of relevant applications and DSM Help articles.

7 The Pilot View button: Click to have an instant preview of all open applications and hover your mouse over the application windows for quick navigation.

Note: Pilot View is not supported by Internet Explorer.

Widgets The widgets at the bottom-right corner of the desktop contain the system information of your Synology DiskStation.

Synology DiskStation User's Guide

Based on DSM 4.1

12 Chapter 2: Get Started with Synology DiskStation Manager

To open/close the widget panel: Click the upward/downward triangle to reveal/close the panel.

You can choose any three of the following subject to be displayed on the widget panel. More information can be acquired by clicking the icon at the top-left corner of each corresponding subject panel.

Current Connections: See a list of users who are currently accessing DiskStation resources. File Change Log: View the file change log records of DiskStation services. No active logs: Appears when none of the logs (Samba, WebDAV, FTP, File Station) is enabled. No logs available: Appears when any one of the logs (Samba, WebDAV, FTP, File Station) is enabled.

Recent Logs: View the log records of DiskStation services. Resource Monitor: Monitor the CPU usage, memory usage, and network flow. Scheduled Backup: View the status of your backup tasks. Storage: View your DiskStation's volume usage and disk status. System Health: Obtain an overall status of your DiskStation and all connected devices (if any). You will be

advised to take corrective action when system error occurs.

Manage DSM with the Main Menu The Main Menu is where you can find all the applications and settings provided by Synology DiskStation Manager.

Restart and Shutdown Click Restart or Shutdown at the bottom-right corner of the Main Menu to restart DiskStation or turn it off, just like using any other operating systems.

Synology DiskStation User's Guide

Based on DSM 4.1

13 Chapter 2: Get Started with Synology DiskStation Manager

Reorder Main Menus Thumbnails Open Main Menu and drag any thumbnail to any position you want.

Open Application Windows In addition to the Control Panel, the Main Menu contains the thumbnails of all the other DSM applications. With DSMs multitasking ability, now you can open multiple application windows at the same time.

To open an application window: Click any thumbnail of an application from the Main Menu to open the application window on the desktop and the application icon on the taskbar.

Note: You can also open application windows through desktop shortcuts. See "Desktop and Shortcuts" on Page 10 for more information.

Use the Control Panel Choose Control Panel from the Main Menu to see the thumbnails of DSM settings.

The DSM settings on the Control Panel are grouped into the following categories: File Sharing and Privileges: Set up Win/Mac/NFS/FTP/WebDAV file sharing service. Network Services: Manage and edit the settings for network services and Internet connection. System: Edit the basic settings on your DiskStation. Application Settings: Assign application privileges for user accounts, enable the services of built-in

applications, create a VPN connection, and index multimedia files stored on your DiskStation for applications.

Note: Control Panel is accessible only to admin or users belonging to the administrators group. See "Create and Edit Groups" on Page 59 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

14 Chapter 2: Get Started with Synology DiskStation Manager

Manage Personal Options Click the Options menu (with a figure icon) at the top-right corner of your DSM desktop to manage your user account settings or log out of DSM.

Account Under Account, you can change your account's password and description.

To modify your account: 1 Enter a description for your account (optional).

2 If you want to change your account's password, enter the new one and confirm it.

3 Enter your email address (optional).

4 Change your display language according to your preferences. The language you specified here for your account will have higher priority over the one specified at Main Menu > Control Panel > Regional Options.

5 Click OK.

Limitations:

The user description is case sensitive and can be 0 to 64 displayable Unicode characters.

The password is case sensitive and should be 0 to 127 displayable characters, including letters, numbers, signs, and space.

Volume Usage Under Volume Usage, you can view your quota on all DiskStation volumes set by admin, as well as the amount of capacity you have used on each volume.

Desktop Under Desktop, you can customize the appearance of your desktop.

To change the background and text color of your desktop: 1 Tick Customize color and then choose from the drop-down menus to change the text color of desktop

thumbnails and the background color of DSM desktop.

2 Click OK.

To upload a customized image that will be used as your desktop wallpaper: 1 Tick Customize background, and then do any of the following to select your background image:

Synology DiskStation User's Guide

Based on DSM 4.1

15 Chapter 2: Get Started with Synology DiskStation Manager

If you want to use an image stored on your DiskStation, click Select image to select the image, and then click Select.

If you want to use the default wallpaper provided by Synology, or select an image that have used as the background image before, click Select image, select an image in the My Images section, and then click Select.

If you want to use an image stored on your computer, click Select image, and then click Upload to select the image.

2 Choose from the drop-down menu to decide how the background image is arranged on your DSM desktop.

3 Click OK.

Photo Station This tab is viewable only when DSM admin or users belonging to the administrators group enable Personal Photo Station service. DiskStation provides the home/photo folder for you to store photos and videos that you want to share. The system will create index thumbnails of the photos and videos automatically, and then people can view photo albums via a web browser. See "Enable Personal Photo Station" on Page 100 for more information.

Others Under Others, You can customize other personal options.

To decide whether to expand the Main Menu after login: 1 Tick Do not expand the Main Menu after login.

2 Click OK.

To skip the confirmation dialog when closing the browser window: 1 Tick Do not show confirmation dialog when leaving DSM.

2 Click OK.

To remember opened windows and restore them after you log in to DSM next time or refresh the browser window: 1 Tick Resume DSM to my previous logout status when logging in.

2 Click OK.

To have a quick preview of an open application when you hover your mouse over its application icon on the taskbar: 1 Tick Enable instant preview on taskbar. 2 Click OK.

Note: Instant preview is not supported by Internet Explorer.

To display the widget panel at the right side of your DSM desktop: 1 Tick Enable widgets. Tick Keep the widget panel on top if you want to keep the panel on top of other DSM

windows.

2 Click OK.

Note: The widget panel is available to DSM admin (or a user belonging to the administrators) only.

To show browser notifications on your DSM desktop: 1 Tick Enable browser desktop notifications.

2 Click OK.

Note: Browser desktop notifications is currently supported by Google Chrome and Safari only. Depending on the version of your web browser, the notification settings page may be different. Please go to the settings page of your browser to manage notification settings.

16

Chapter

3 Chapter 3: Modify System Settings

After you have connected to Synology DiskStation Manager (DSM) and learned how to access its functions and customize its appearance, you as admin or a user belonging to the administrators group can begin to modify its basic settings.

This chapter explains how to change the network settings, specify default languages, set up time, and use energy saving features.

Change DSM Settings Go to Main Menu > Control Panel > DSM Settings to change the following DSM settings.

Login Style Here you can change the login style by choosing from a variety of templates and displaying a logo or a background image on your DSM's login screen.

To change the login template: Select a template you want and click Apply. The chosen template will be displayed on your login screen next time you log in to your DiskStation.

To change the background image of the login screen: 1 Click the rectangular image or the "+" icon (viewable only when the previously-selected image is removed) at

the middle of the rectangle in the Background section, and then do any of the following to select your background image:

If you want to use an image stored on your DiskStation, select a folder in which your images are saved on the left panel and double-click the image, or select the image and click Select.

Synology DiskStation User's Guide

Based on DSM 4.1

17 Chapter 3: Modify System Settings

If you want to use the default wallpaper provided by Synology, click Default Wallpaper, double-click the image, or select the image and click Select.

If you want to select an image that have used as the background image before, double-click the image in the My Previous Images section, or select the image and click Select.

If you want to use an image stored on your computer, click Upload next to Use My Image, and then double- click the image to select the image.

2 Choose how the background image is arranged and the background color from the drop-down menus in the Background section. You can also click Preview to preview the login screen and see if further adjustments are needed.

3 Click Apply.

To add a logo to the login screen: 1 Click the rectangular image or the "+" icon (viewable only when the previously-selected image is removed) at

the middle of the rectangle in the Logo section, and then do any of the following to select your logo image:

If you want to use an image stored on your DiskStation, select a folder in which your images are saved on the left panel and double-click the image, or select the image and click Select.

If you want to select an image that have used as the logo before, double-click the image in the My Previous Images section, or select the image and click Select.

If you want to use an image stored on your computer, click Upload next to Use My Image, and then double- click the image to select the image.

Note: The size of the image file must be less than 1 MB.

2 Choose a way of alignment from the drop-down menu in the Logo section. You can also click Preview to preview the login screen and see if further adjustments are needed.

3 Click Apply.

HTTP Service Click the HTTP Service tab to change the port number or enable HTTPS connection.

To change the default HTTP or HTTPS port number (for DSM and Audio Station): 1 Enter the port number in the HTTP or HTTPS field.

2 Click Apply.

To enable HTTPS connection: 1 Tick Enable HTTPS connection.

2 Click the optional Import Certificate or check Automatically redirect HTTP connections to HTTPS. (See the section below for more information.)

3 Click Apply.

When the HTTPS connection is enabled, any connection to Synology DiskStation via the HTTPS protocol will be encrypted with the SSL/TLS encrypting mechanism.

Synology DiskStation User's Guide

Based on DSM 4.1

18 Chapter 3: Modify System Settings

More Information

About redirecting to HTTPS connection: When the option Automatically redirect HTTP connections to HTTPS is checked, you will be redirected to port 5001 while trying to access the web management UI through port 5000.

Ports used for HTTPS connection: DSM: The port number is 5001, so you can access the management UI through the secure channel:

https://Synology_Server_IP:5001/ Web Station: The port number is 443, so you can access Web Station through the secure channel:

https://Synology_Server_IP:443/ or https://Synology_Server_Name:443/

About importing certificate: If you have a certificate issued by the trusted Certificate Authority (CA), please click Import Certificate to upload your own certificate and private key in order to host a valid SSL server. The certificate should match the private key. Please keep your private key safely.

Security Click the Security tab to modify the security level for each DSM browsing session.

To set the logout timer:

1 Enter any value between 1 to 65535 in Logout timer (minutes) to specify the idle time period before the automatic logout.

2 Click Apply.

An automatic logout occurs if you are inactive for the specified time period.

To skip IP checking:

1 Tick Enhance browser compatibility by skipping IP checking.

2 Click Apply.

If you access DiskStation through a HTTP proxy and encounter random logouts, you can skip IP checking to avoid this problem. Nonetheless, skipping IP checking will lower the security level.

Router Port Click the Router Port tab to enable router port configuration. When you set up DSM's port forwarding rule on your router, if you specifies different port numbers for the router port (assigned on your router) and the local port (assigned on your DiskStation), you need to enter the router port number here to make sure DiskStation files you shared to Internet services (such as Google docs) can be accessed successfully. For more information, click the Help button (with a question mark) at the top-right corner.

Synology DiskStation User's Guide

Based on DSM 4.1

19 Chapter 3: Modify System Settings

Change Network Settings Go to Main Menu > Control Panel > Network to modify the following network settings of your Synology DiskStation.

General In this section, you can change your DiskStation identification on the network by entering a server name. You can also set up the domain name server and default gateway here.

To rename DiskStation: Enter the new server name in the Server Name field, and click Apply.

To set up domain name server and default gateway: Enter the IP address in the DNS server and Default gateway fields, and click Apply.

Note: The DNS Server and Default Gateway fields will not be available for modification if all of your network interfaces are configured automatically, or if your DiskStation is connected to the Internet via PPPoE.

To enable your DiskStation to connect via a proxy server: Tick Connect via a proxy server, enter the address and port in the fields, and click Apply to save the settings.

Note:

Click Advanced Settings to configure HTTP proxy, HTTPS proxy and the authentication information. If you enable Connect via a proxy server, DSM Update and Package Center along with some other packages

will connect to the Internet through a proxy.

Network Interface In this section, you can connect your DiskStation to the network via any of the following network interfaces.

LAN If your DiskStation is connected to a local area network, you can click LAN or LAN [number] (for DiskStations with multiple LAN ports) on the left side to configure the network interface.

Synology DiskStation User's Guide

Based on DSM 4.1

20 Chapter 3: Modify System Settings

To decide how your DiskStation obtains IP address: 1 Choose either of the following:

Get network configuration automatically (DHCP): Get IP address automatically via DHCP. Use manual configuration: Manually enter the IP address, subnet mask, DNS, and gateway.

2 Click Apply.

To set up IPv6: Click IPv6 Setup. See "IPv6 Setup" on Page 21 for more information.

Term Explanation Jumbo Frames: Jumbo Frames are Ethernet frames with more than the standard 1500 bytes of Maximum Transmission Unit (MTU), allowing Ethernet transmission of large files to be more efficient. It can only be enabled under Gigabit network environment. To ensure Jumbo Frame works properly, all the computers and devices across the network accessing your DiskStation must support it and use the same MTU value.

Bond For DiskStations with multiple LAN ports, you can combine multiple LAN interfaces into the Bond [number] interface with Link Aggregation1

To combine multiple LAN interfaces with Link Aggregation:

. You can configure this interface as you would with any LAN interface.

1 Click Create.

2 Choose any of the following modes and click Next:

Note: Before you enable Link Aggregation, please make sure all LAN cables are connected to the same switch.

IEEE 802.3ad Dynamic Link Aggregation: IEEE 802.3ad is the standard for most Link Aggregation implementations. A switch with 802.3ad support is required to use in this mode.

Network Fault Tolerance only: If the LAN 1 port becomes unavailable, the system will use LAN 2 to provide service. You can select this option if your switch does not support IEEE 802.3ad.

3 Select two or more LAN interfaces that will be used for Link Aggregation, and click Next. 4 Configure the network settings and click Apply.

To separate the Bond interface into multiple LAN interfaces: 1 Click the Bond [number] interface on the left side.

2 Click Remove and then click Apply.

Term Explanation Link Aggregation: For DiskStation with multiple LAN ports, you can set your DiskStation to connect multiple LAN cables to the network at the same time, or assign it with two IP addresses under different subnets. With Link Aggregation enabled, trunking (combining network bandwidth of aggregated LAN interfaces for multiplied connection speed) and network fault tolerances (maintaining network connection when any of the aggregated LAN interfaces is unavailable) are supported.

Wireless2

Click Wireless on the left side to connect Synology DiskStation to a wireless network.

Note: Wireless network is available only when a wireless dongle is plugged into the USB port of your Synology DiskStation.

To set up a wireless network: Click Set up a wireless network and choose from the following options (If you are already connected to a wireless network, click Disconnect first).

--------- 1 Link Aggregation is only supported on DiskStations with multiple LAN ports. 2 Wireless network is supported on specific models only.

Synology DiskStation User's Guide

Based on DSM 4.1

21 Chapter 3: Modify System Settings

Join a wireless network: The wizard will scan available wireless access points or Ad-Hoc networks with their signal strength and security status. If the access point you want to access is locked with password protection, the wizard will ask you to enter the password.

Connect to a hidden wireless network: If an access point doesn't broadcast its SSID (Network Name) for privacy reason, it will not be discovered during the scanning. You can manually connect to those hidden access points by entering the required information manually.

Create an Ad-Hoc Network: In addition to infrastructure network, in which a central access point (AP) bridges the wireless network to a wired Ethernet network, Ad-Hoc network is also widely used. In an Ad-Hoc network, all wireless devices within range of each other can communicate in a peer-to-peer fashion without a central access point. To set up an Ad-Hoc network, all wireless devices have to be configured for Ad-Hoc mode instead of the infrastructure mode.

Note: For a list of compatible wireless dongles, visit www.synology.com.

IPv6 Setup When you are configuring the LAN or Wireless Network interface, click the IPv6 Setup button to change the IPv6 settings. Synology DiskStation supports IPv4/IPv6 dual stack scheme. This means that both IPv4 and IPv6 can work simultaneously on Synology DiskStation. The default setting for IPv6 is Auto.1

On the IPv6 Setup page, choose between the different setup types:

Auto: DiskStation will automatically generate a local IPv6 address. This is generated based on DiskStation's MAC address.

DHCP: DiskStation will automatically get an IPv6 address from the DHCP server which supports IPv6. Manual: Set up IPv6 manually by entering IPv6 address, Prefix length, and Default gateway. Off: Disable IPv6 support.

Note: If you want to join an IPv4 network environment with IPv6 address, you need to enable IPv6 Tunnel. See the section below for more information.

PPPoE Click the PPPoE on the left side if your Synology DiskStation is connecting to a DSL or cable modem, and your Internet Service Provider (ISP) uses PPPoE (Point to Point Protocol over Ethernet).

To connect to the Internet via PPPoE: 1 Click PPPoE Setting.

2 Enter the account information provided by your ISP.

3 Click OK.

Note: If you are still facing connection problems, contact your Internet Service Provider.

Hotspot2

If there is a wireless dongle

3

To enable Hotspot on your DiskStation:

connected to the USB port of your Synology DiskStation, you can enable hotspot on your DiskStation to turn it into a wireless access point that can share its wireless connection with computers or mobile devices within the range of the Wi-Fi network.

1 Click the WiFi Setup button.

2 Select Wireles Hotspot, and then click OK.

3 Specify the SSID, the wireless mode and width, and the transmit power for your Wi-Fi network.

--------- 1 IPv6 service is only supported on 08-series models or later (excluding 108j, 109j). 2 Hotspot is only supported on specific models only. 3 For a complete list of supported wireless dongles, visit www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

22 Chapter 3: Modify System Settings

4 If you want to secure your Wi-Fi network with the authentication mechanism, tick Enable wireless security, and then choose the options to specify the authentication information. Client devices will be required to enter those information before they could access your Wi-Fi network.

5 Click Apply.

Tunnel Tunnel is a technique that encapsulates IPv6 packets within IPv4 packets, allowing isolated IPv6 host or network to be compatible with IPv4 network backbone.

Click the Tunnel tab to allow your DiskStation to gain Internet access via IPv6 under the IPv4 environment.

To setup IPv6 Tunnel: 1 Tick Enable tunnel. 2 In Server address, enter the hostname or the IP of the tunnel service provider.

3 Select if you want to Connect anonymously or Connect with an existing account. If you choose the latter, please also enter User name and Password.

4 Click Apply to save the settings.

Note:

Your external IPv6 address may be automatically updated by the service provider. However, Synology DiskStation will not remove the old IPv6 address immediately.

If you are still facing connection problems, contact your Internet Service Provider.

Modify Regional Options Go to Main Menu > Control Panel > Regional Options to configure the following regional options.

Synology DiskStation User's Guide

Based on DSM 4.1

23 Chapter 3: Modify System Settings

Set Up Time Click the Time tab to set up the time. You can check the current time, manually set the server's date and time, or have them set automatically using a network time server.

To set the time zone: 1 Choose a time zone from the Time zone drop-down menu.

2 Click Apply.

To set the date and time manually: 1 Choose Manually and select the date and time.

2 Click Apply.

To sync the date and time with NTP server: 1 Choose Synchronize with a NTP server, and enter the address of your network time server or choose a

server from the drop-down menu.

2 Click Update Now to make sure your Synology DiskStation can successfully synchronize time with the server.

3 Click Apply.

Note: Make sure a valid DNS server IP has been entered at Main Menu > Control Panel > Network and that your DiskStation is connected to the Internet.

More Information

Network Time Protocol (NTP) is used to synchronize the time of all clients and servers over a data network.

Below are a few recommended NTP servers: time.apple.com time.asia.apple.com time.euro.apple.com time.nist.gov For more information about NTP Server, please visit http://www.eecis.udel.edu/~mills/ntp/servers.html

Language Click the Language tab to set the language for Synology DiskStation Manager, notifications, and specify the codepage for Unicode filename conversion. Display Language: Choose your preferred display language, or have it the same as your default browser

setting. Notification Language: Set your preferred language for email and instant messaging notifications from

Synology DiskStation. Codepage: Synology DiskStation uses Unicode to avoid file inaccessibility from computers using different

languages. But for the following devices or applications to use Synology DiskStation services without problem, you need to choose the appropriate codepage for them: Computers without Unicode support Applications that convert non-Unicode strings to Unicode, such as FTP service, UPnP support, music

metadata indexing

NTP Service Click the NTP Service tab to have your Synology DiskStation serve as a network time server to synchronize time between different network devices and the DiskStation over network.

To enable the NTP service: Tick Enable the NTP service and click Apply.

Synology DiskStation User's Guide

Based on DSM 4.1

24 Chapter 3: Modify System Settings

Note: The NTP service is required for Surveillance Station. Therefore, if you have Surveillance Station installed and run on your DiskStation, the service cannot be disabled while the package is running.

Use Energy Saving Features Go to Main Menu > Control Panel > Power to manage the following energy saving features provided by DSM.

General Click the General tab to set up power recovery or Wake on LAN (WOL)1

To enable the power recovery function:

, or conduct FAN controls.

1 Tick Restart automatically after a power failure. If the DiskStation was shut down abnormally due to a power failure, ticking this option will boot up DiskStation automatically after power has been restored.

2 Click Apply.

To enable Wake on LAN: 1 Tick Enable Wake on LAN (or Enable WOL on LAN [number] for DiskStations with multiple LAN ports).

2 Click Apply.

More Information About Wake on LAN: After Wake on LAN is enabled for your DiskStation, you can turn on Synology DiskStation over the local area network or the Internet by using a WOL (Wake on LAN) application. Activate the function by entering DiskStations IP address (or DDNS hostname) and MAC address.

Wake on LAN works only after Synology DiskStation is shut down properly by pressing the Power button or selecting Shutdown from DSM's Main Menu, and its power cord is plugged into a working power outlet.

Note: You can also perform Wake on LAN for supported Synology DiskStation with Synology Assistant. See the Help of Synology Assistant for more information.

--------- 1 Wake on LAN is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

25 Chapter 3: Modify System Settings

To control fan speed:

1 Choose the appropriate fan speed mode according to your need (Cool Mode, Lower-Power mode or Quiet mode), or according to the size of your hard disks (2.5" hard disk mode or 3.5" hard disk mode), depending on the DiskStation models you are using.

2 Click Apply.

Cool Mode or 3.5" hard disk mode will provide better cooling effect, while Quiet Mode or 2.5" hard disk mode can further reduce the noise level.

Beep Control Click the Beep Control tab to have DiskStation play beep sounds under certain circumstances.

To manage beep control: Tick or uncheck the checkboxes and click Apply.

UPS Under the UPS tab, you can enable UPS support to prevent data loss when an unexpected power failure occurs.

To enable local UPS support: 1 Connect a local UPS to the USB port of your DiskStation.

2 Tick the Enable UPS support checkbox.

3 Set the Time before DiskStation enters Safe Mode.

Note: If the local UPS is low on battery, or the network UPS server enters Safe Mode, DiskStation will ignore the specified time period and enter Safe Mode immediately.

4 You can decide whether to send a shutdown signal to the UPS when the system enters Safe Mode. Most UPS can restore power supply automatically when the power recovers.

5 Click Apply.

Term Explanation

When entering Safe Mode, the system will first stop all services and unmount all data volumes to prevent data loss, so that when the UPS shuts down, the system will be turned off safely. If the Power Recovery function has been enabled, the system will restart automatically when power is restored.

To enable network UPS support: 1 Tick the Enable UPS support checkbox.

2 Enter the Network UPS server IP. (Make sure the server allow connection from Synology DiskStation)

3 Set the Time before DiskStation enters Safe Mode.

4 Click Apply.

More Information

Network UPS support requirements: You will need another server connected to an UPS that can be communicated via internet, i.e. a network

UPS server. A network device, such as a switch or a hub, should be connected to the same UPS, so that Synology

DiskStation can still communicate with network UPS server during an unexpected power failure.

To enable Network UPS server: 1 Connect a USB UPS to Synology DiskStation.

2 Tick the Enable UPS support checkbox.

3 Tick the Enable Network UPS Server checkbox.

4 Enter the IP addresses which will be allowed to connect to Synology DiskStation.

Synology DiskStation User's Guide

Based on DSM 4.1

26 Chapter 3: Modify System Settings

5 Click Apply.

Schedule Click the Schedule tab to start up or shut down automatically at a specified time.

To add a new startup/shutdown schedule: 1 Click the Create button to open the Add Schedule dialog.

2 Choose Startup or Shutdown.

3 Set the Date and Time for startup or shutdown.

4 Click OK.

5 Click Save.

The new schedule will be added to the schedule list.

To edit a schedule: 1 Select the schedule and click Edit to edit the schedule.

2 Click OK.

3 Click Save.

To enable or disable a schedule: 1 Tick or uncheck the checkbox for the schedule.

2 Click Save.

To enable or disable all schedules: 1 Tick or uncheck the Enabled checkbox.

2 Click Save.

To delete a schedule: 1 Select a schedule and click Delete.

2 Click Save.

To view schedule summary: Click Summary to browse the weekly schedule for startup/shutdown.

Note: You can specify up to 100 schedules for one DiskStation.

HDD Hibernation Click the HDD Hibernation tab to manage disk hibernation for all internal or external disks on your DiskStation. When a disk enters HDD hibernation mode, it will stop spinning and become inactive, which not only saves energy but also extends the disk's lifespan.

27

Chapter

4 Chapter 4: Manage Storage Space

Before sharing Synology DiskStation services with your users, you need to set up storage spaces first. This chapter explains how to use Storage Manager to set up storage space (including volumes, Disk Groups, iSCSI Targets, iSCSI LUNs), access external disks connected to DiskStation, and check hard drive's status.

What is Volume and Disk Group? With the hard drives installed on your DiskStation, you can create volumes for storing and sharing your files.

Note: For more information about setting up file sharing on your DiskStation, see "Chapter 7: Set Up File Sharing" on Page 51.

Volume Creation Methods For Synology DiskStation with 2 or more bays, you can create a volume with the following methods:

Combine several hard disks into a volume: This method allows you to create a volume with data protection. See "Create a Volume Using the Quick Mode" on Page 29 and "Create a Volume by Combining Several Hard Disks" on Page 29 for more information.

Combine several hard disks into a Disk Group, and then create multiple volumes on the Disk Group: This method not only allows you to create a volume with data protection, but you can also specify volume capacity according to your needs. See "Create a Volume by Allocating Partial Space on a Disk Group" on Page 29 and "Create a Disk Group" on Page 30 for more information.

Synology DiskStation Supported RAID Types For Synology DiskStation with 1 bay, you can create a Basic volume. For Synology DiskStation with 2 or more bays, you can choose between several RAID types during volume or Disk Group creation. Some of the RAID types can provide data protection, which means data integrity is protected when one or two of the hard drives fail.

RAID Type HDD # Allowed Failed HDD # Description Capacity

SHR1

1

0 Synology Hybrid RAID (SHR) can optimize the storage capacity when combining hard drives with different sizes. If a SHR storage space is composed of two or three hard drives, data integrity is protected when one of the hard drives fail. If a SHR storage space is composed of four or more hard drives, data integrity is protected when one or two of the hard drives fail.

1 x (HDD size)

2 - 3 1

Optimized by the system

4 1 - 2

Basic 1 0

A Basic volume is created with one hard drive as an independent unit. When creating a Basic volume, you can select only one hard drive at a time.

1 x (HDD size)

JBOD 2 0 JBOD is a collection of hard drives. Sum of all HDD sizes

RAID 0 2 0

Combining multiple disks to build a storage space, RAID 0 offers Striping, a process of dividing data into blocks and spreading the data blocks across several hard drives, but without safety measures.

(HDD #) x (Smallest HDD

size)

--------- 1 RAID types except for Basic are supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

28 Chapter 4: Manage Storage Space

RAID Type HDD # Allowed Failed HDD # Description Capacity

RAID 1 2 - 4 (HDD #) - 1 The system will write identical data to each hard drive at the same time, so data integrity is protected when at least one disk is normal.

Smallest HDD size

RAID 5 3 1

This configuration includes a backup option. It uses parity mode to store redundant data on space equal to the size of one disk for later data recovery.

(HDD # 1) x (Smallest HDD

size)

RAID 5+Spare 4 2

A RAID 5+Spare storage space requires at least four drives, one of which will act as a hot spare drive to rebuild the failed drive of the volume automatically.

(HDD # 2) x (Smallest HDD

size)

RAID 6 4 2

RAID 6 provides extra data protection. It uses parity mode to store redundant data on space equal to the size of two disks for later data recovery.

(HDD # 2) x (Smallest HDD

size)

RAID 10 4

(even number)

1 HDD within each RAID 1

group

RAID 10 has the performance of RAID 0 and data protection level of RAID 1. RAID 10 combines two hard drives into a RAID 1 group, and combines all the groups with RAID 0.

(HDD # / 2) x (Smallest HDD

size)

Manage Volumes or Disk Groups with Storage Manager Go to Main Menu > Storage Manager and click the Volume or Disk Group tab to create, set up, and manage volumes or Disk Group.

Synology DiskStation User's Guide

Based on DSM 4.1

29 Chapter 4: Manage Storage Space

Create a Volume The Volume Creation Wizard allows you to create a volume on your DiskStation in several ways.

Note: Volume creation might take a while to finish, depending on the capacity to be created.

Create a Volume Using the Quick Mode The system will create a SHR volume, which optimizes space allocation based on the capacity of the chosen hard disks.

To create a SHR volume using the Quick mode: 1 Click the Volume tab.

2 Click Create to open the Volume Creation Wizard.

3 Choose the Quick mode, and click Next. 4 Choose the hard disks you want to add to the volume, and click Next. 5 If you select 4 or more disks in the previous step, choose the data protection level according to your needs.

6 Click Yes to confirm, and then choose whether to perform disk check. Click Next to continue.

7 Click Apply to start volume creation.

Create a Volume by Combining Several Hard Disks This action allows you to create a volume by combining several hard disks.

To create a volume by combining several hard disks: 1 Click the Volume tab.

2 Click Create to open the Volume Creation Wizard.

3 Choose the Custom mode, and click Next. 4 Choose Single Volume on RAID, and click Next. 5 Choose the hard disks you want to add to the volume, and then click Next. 6 Click Yes to confirm, and then choose available RAID type for the new Disk Group. Click Next to continue.

7 Choose whether to perform disk check, and then click Next. 8 Click Apply to start volume creation.

Create a Volume by Allocating Partial Space on a Disk Group This action allows you to create a volume by allocating partial space on a Disk Group.

To create a volume by allocating partial space on a Disk Group: 1 Click the Volume tab.

2 Click Create to open the Volume Creation Wizard.

3 Choose the Custom mode, and click Next. 4 Choose Multiple Volume on RAID, and click Next. 5 Choose either of the following:

Create a new Disk Group: This action will create a new Disk Group from unused hard disks, and then create a volume on the newly-created Disk Group. Click Next and do the following: a Choose the hard disks you want to add to the Disk Group, and then click Next. b Click Yes to confirm, and then choose available RAID type for the new Disk Group. Click Next to continue. c Choose whether to perform disk check, and then click Next.

Note: The newly-created Disk Group will be displayed under the Disk Group tab. You can also create a Disk Group by following the instructions of "Create a Disk Group" (shown below).

Choose an existing Disk Group: This action will create a volume on an existing Disk Group. Choose the Disk Group from the drop-down menu, and click Next.

Synology DiskStation User's Guide

Based on DSM 4.1

30 Chapter 4: Manage Storage Space

6 On the Allocate volume capacity page, enter a number in the Allocate Size (GB) field to specify the volume capacity, and click Next.

7 Click Apply to start volume creation.

Create a Disk Group You can also create a Disk Group on your DiskStation, and then create multiple volumes on the created Disk Group.

To create a Disk Group: 1 Click the Disk Group tab.

2 Choose the hard disks you want to add to the Disk Group, and then click Next. 3 Click Yes to confirm, and then choose available RAID type for the new Disk Group. Click Next to continue.

4 Choose whether to perform disk check, and then click Next. 5 Click Apply to start Disk Group creation.

To create volumes on the created Disk Group: Follow the instructions of "Create a Volume by Allocating Partial Space on a Disk Group" on Page 29. Choose Choose an existing Disk Group in step 5, and choose the Disk Group to create a volume on it.

More Information About Shared Folder Quota: DSM doesn't come with shared folder quota support. However, you can limit the maximum size of a shared folder by doing the following:

1 Create a volume and specify its capacity by following the instructions of "Create a Volume by Allocating Partial Space on a Disk Group" (shown above).

2 Create a single shared folder on the newly-created volume. (See "Set Up Shared Folders" on Page 60 for more information.)

3 After the setup is complete, the maximum size of the shared folder will be limited to be the same as the volume capacity.

Remove a Volume or Disk Group 1 Click the Volume or Disk Group tab.

2 Select the volume or Disk Group you want to remove.

3 Click Remove and follow the wizard to remove the volume or Disk Group.

Note: Data stored on the volume or Disk Group will be deleted after you remove the volume or Disk Group. Be careful using this option.

Repair a Volume or Disk Group The repair function is available for RAID 1, RAID 10, RAID 5, RAID 5+Spare, RAID 6, andSHR volumes or Disk Groups. Depending on your RAID types, When one or two of the hard drives in the volume or Disk Group fails, it will be in the degraded mode. You can repair the volume or Disk Group by replacing the crashed disk(s) to keep the data on the volume or Disk Group protected.

Note: Synology DiskStation provides the hot swapping function, allowing you to replace the crashed disk without shutting down your Synology DiskStation.1

To identify and replace the crashed disk:

1 Identify the crashed disk by doing one of the following:

Check the hard drive icons in Storage Manager. The icon of the crashed disk will appear with an exclamation mark.

--------- 1 This is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

31 Chapter 4: Manage Storage Space

Go to Information > Status, and check the status column in the Hard disk(s) section. (See "Check System Information" on Page 162 for more information.)

Check the LED indicators on your DiskStation. (See the Quick Installation Guide that comes with your installation disc for more information.)

2 Pull out the hard drive tray to replace the crashed disk with a new one.

Note: The replacement hard drive size must be larger or equal to the size of the smallest disk in the volume or Disk Group.

To repair a volume or Disk Group: 1 Click the Volume or Disk Group tab.

2 Click Manage.

3 Select Repair and follow the wizard to repair the volume or Disk Group.

Note:

The status of the repairing hard drive must be Initialized or Not Initialized. If your volume is created by allocating partial space on a Disk Group (see "Create a Volume by Allocating Partial

Space on a Disk Group" on Page 29 for more information), you need to repair its Disk Group.

Change RAID Type If you have created a Basic, RAID 1 or RAID 5 volume or Disk Group, you could add a new drive to the Synology DiskStation, and then use Storage Manager to change the RAID type.

Available RAID type change includes: Basic to RAID 1, RAID 5 or RAID 5+Spare RAID 1 to RAID 5 or RAID 5+Spare Add mirror disk to RAID 1 RAID 5 to RAID 5+Spare or RAID 6 RAID 5+Spare to RAID 6

To change the RAID type: 1 Click the Volume or Disk Group tab.

2 Select the volume or Disk Group you want to change.

3 Click Manage.

4 Choose Change RAID type and follow the wizard to complete the setup.

Note:

The status of the volume or Disk Group must be normal. The status of the added drive must be Initialized or Not Initialized. If you want to change the RAID type, enough number of hard drives for the new type is required. See

"Synology DiskStation Supported RAID Types" on Page 27 for the required amount of disks for the RAID type. The size of the replacement hard drive must be larger than the smallest disk size of the volume or Disk Group.

Expand a Volume or Disk Group You can expand the storage capacity of a volume or Disk Group.

Expand a Volume by Changing Volume Size If your volume is created by allocating partial space on a Disk Group, you can do the following to expand the volume.

To expand a volume by changing volume size: 1 Under the Volume tab, click the volume you want to expand.

2 Click Edit.

Synology DiskStation User's Guide

Based on DSM 4.1

32 Chapter 4: Manage Storage Space

3 Enter a number in the Size (GB) field, or click Max to automatically fill in the number of the available size on the Disk Group.

Note: The number must be larger than the original volume capacity.

4 Click OK.

Expand a Volume or Disk Group by Replacing with Larger Disks When the internal HDD storage runs out of space, you can follow the steps below to replace a larger HDD without losing the original data.

For one-bay models: 1 Turn off the Synology DiskStation.

2 Replace the internal hard drive with a larger one.

3 Turn on the Synology DiskStation.

4 Reinstall the system. See "Reinstall Synology DiskStation" on Page 172 for more information.

5 Connect the replaced hard drive to the USB or eSATA port.

6 Copy the data from the replaced hard drive to the new hard drive.

7 Remove the replaced hard drive.

For Basic or RAID 0 on models with two or more bays: 1 Back up all data stored on the Synology DiskStation.

2 Turn off the Synology DiskStation.

3 Replace the internal hard drives with larger ones.

4 Turn on the Synology DiskStation

5 Reinstall the system. See "Reinstall Synology DiskStation" on Page 172 for more information.

6 Copy the backup data to the new volume or Disk Group.

For RAID 1 and RAID 5, RAID 5+Spare, and RAID 6: 1 Turn off the Synology DiskStation (skip this step for models that support disk hot swapping).

2 Replace the first internal hard drive with a larger hard drive.

3 Turn on the Synology DiskStation and repair the volume or Disk Group. See "Repair a Volume" on Page 30 for more information.

4 Repeat step 1 to 3 until all internal hard drives are replaced with larger hard drives.

5 The system will expand the volume or Disk Group automatically.

Note:

Before replacing the spare disk of a RAID 5+Spare volume or Disk Group, you need to click Manage, click Change RAID type, and then follow the wizard to change the volume or Disk Group.

When the system is removing a volume or Disk Group, all enabled services on other volumes will be temporarily stopped. When the volume or Disk Group is removed successfully, those services will be resumed.

You can only remove the hard drive when the volume or Disk Group is in Normal status; otherwise it will cause data loss. If the volume or Disk Group is in Degraded status, please repair the volume or Disk Group before replacing it.

Synology DiskStation User's Guide

Based on DSM 4.1

33 Chapter 4: Manage Storage Space

For SHR volumes: 1 Determine the number of replacement disks required for capacity expansion:

If all the hard disks of the SHR volume are of equal size, at least two replacement disks of larger size should be used.

If the hard disks of the SHR volume are of different sizes, please follow the below guidelines to replace the disk:

a Order the disks from largest to smallest.

b The replacement disk should be the largest among all disks.

2 Judging from the conditions mentioned above, replace one disk with another of larger size.

3 Log in to DSM as admin, and go to Main Menu > Storage Manager > Volume.

4 Select the volume you want to expand (marked as Degraded), click Manage, select Repair, and then follow the wizard to initialize the new disk and repair the volume.

5 When the status of the volume is changed from Degraded to Normal, repeat the above steps to replace the next disk.

6 The system will expand the volume or Disk Group automatically.

Expand a Volume or Disk Group by Adding Disks If you have empty hard drive bays in your Synology DiskStation, you can expand JBOD, RAID 5, RAID 5+Spare, RAID 6, and SHR volumes or Disk Groups by adding disks.

To expand a volume or Disk Group by adding disks: 1 Install a new hard drive for your Synology DiskStation.

2 Select the volume or Disk Group you want to expand.

3 Click Manage and choose Expand the volume by adding hard disks (for volume expansion) and Expand the RAID by adding hard disks (for Disk Group expansion).

4 Select the hard drive in the Choose disks section.

5 Follow the wizard to complete the setup.

Note:

For RAID 5, RAID 5+Spare, and RAID 6 volume or Disk Group, the hard drive size must be larger than the smallest disk in the volume or Disk Group.

The status of the volume or the Disk Group must be Normal. The status of the added disk must be Initialized or Not Initialized. You can also expand your volume with Synology Expansion Unit using the same way.1

--------- 1 Synology Expansion Unit is supported on specific models only. Please visit

www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

34 Chapter 4: Manage Storage Space

Manage iSCSI Target with Storage Manager Go to Main Menu > Storage Manager and click the iSCSI Target tab to manage iSCSI Targets on your Synology DiskStation. You can manage up to 10 or 321

iSCSI Targets on one Synology DiskStation, and map iSCSI LUNs to them.

Term Explanation

iSCSI iSCSI is an Internet Protocol based storage networking standard for linking data storage facilities. By carrying SCSI commands over IP networks, iSCSI can facilitate data transfers over local area networks (LANs), wide area networks (WANs), or the Internet.

Through iSCSI, the space on storage server will be regarded as local disks by clients operation system. But in reality, all data transferred to the disk are actually transferred over network to the storage server.

iSCSI Target and LUN In SCSI terminology, A LUN (logical unit number) represents an individually addressable (logical) SCSI device that is part of a physical SCSI device (called "Target").

An iSCSI environment emulates the connection to a SCSI hard disk. An iSCSI Target is like a connection interface, and LUNs are essentially numbered disk drives. When an iSCSI Target is connected by an iSCSI initiator (a client), all the LUNs mapped to the iSCSI Target are virtually attached to the clients operation system. Therefore, Initiators can establish and manage file systems on iSCSI LUNs, as they would a raw SCSI or IDE hard drive.

To create an iSCSI Target: 1 Click the Create button.

2 Enter the iSCSI Target's information, including Name, IQN, and whether to enable CHAP authentication.

3 Click Next. 4 Set up iSCSI LUN mapping. Select Create a new iSCSI LUN or Map existing iSCSI LUNs.

Note: For more information about creating iSCSI LUNs, see "Manage iSCSI LUNs with Storage Manager" on Page 36.

5 Click Next. 6 Click Back to modify or Apply to confirm settings.

--------- 1 32 iSCSI targets are supported on specific models only. Please visit www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

35 Chapter 4: Manage Storage Space

Term Explanation

IQN: IQN (iSCSI Qualified Name) is a set of unique name for an iSCSI Target. It should not conflict with iSCSI Target IQNs on other servers. IQN must be less than 128 characters and can include letters (case insensitive), numbers, colons, dashes, and dots. The suggested naming format is iqn.[date].[domain]:[device identifier], for example: iqn.2000-04.com.synology:storage.diskarray.1.

CHAP authentication: If you select CHAP, the server will be able to verify the client's identity. In Mutual CHAP, both the client and the server will authenticate each other. Username can be composed of 1 ~ 12 letters and numbers, and password can be composed of 12 ~ 16 letters and numbers.

To remove an iSCSI Target: You can remove an iSCSI Target and any mapped iSCSI LUNs. Note that when removing an iSCSI LUN, all data on the iSCSI LUN will be deleted.

1 Select the iSCSI Target you want to remove.

2 Click Remove.

3 If you want to remove mapped iSCSI LUNs, select Delete mapped iSCSI LUNs as well and select the ones you want to remove.

4 Click OK.

To edit an iSCSI Target: 1 Select the iSCSI Target you'd like to edit.

2 Click Edit. 3 Edit the settings to your preference. Click OK to save the changes.

Term Explanation

CRC Checksum: Enable CRC Checksum to check if any error occurred during data transmission.

Multiple Sessions: Allow multiple sessions from one or more initiators to connect to the same iSCSI Target at the same time. To protect your files from corruption or unexpected data loss, it is strongly suggested that you use a shared file system or cluster system such as VMware Virtual Machine File System (VMFS) and Oracle Cluster File System (OCFS).

Masking: Masking allows an iSCSI Target to be exclusively accessed by specified iSCSI initiator IQNs.

To enable or disable an iSCSI Target: 1 Select the iSCSI Target you'd like to enable or disable.

2 Click Enable or Disable.

To register iSCSI Targets with an iSNS server: 1 Click iSNS.

2 Tick Enable iSNS.

3 Enter the IP address of the iSNS server in the iSNS Server field.

4 Click OK.

Term Explanation

iSNS iSNS (Internet Storage Name Service) are often used in a local area network with complex storage deployment, facilitating IT staffs to discover storage and manage iSCSI devices. You can register all the iSCSI Targets on your DiskStation with the iSNS server on your network.

Synology DiskStation User's Guide

Based on DSM 4.1

36 Chapter 4: Manage Storage Space

Manage iSCSI LUNs with Storage Manager

Go to Main Menu > Storage Manager and click the iSCSI LUN tab to manage iSCSI LUNs on your Synology DiskStation. An iSCSI LUN (logical unit number) can be mapped to multiple iSCSI Targets to perform storage operations such as read or write. You can create up to 10 or 2561

iSCSI LUNs on your DiskStation.

There are 2 ways to create an iSCSI LUN: Designate several disks (Block-level). Designate a portion of your volume space (Regular Files). If you create an iSCSI LUN with several disks, you can repair or expand it, or change its RAID type, just like using a volume. (Please see Page 28 of this chapter for detailed information about volume management.)

To create an iSCSI LUN: 1 Click Create.

2 Select Custom.

3 Click Next. 4 Select the iSCSI LUN type you want to create.

iSCSI LUN (Regular Files): The iSCSI LUN is created by designating a portion of the volume space for its usage. Set up iSCSI LUN configuration, including Name, Location, Thin Provisioning, Capacity (GB), iSCSI Target mapping.

iSCSI LUN (Block-Level) - Single LUN on RAID: The iSCSI LUN is created by combining several hard disks. Enter the name for the LUN, choose iSCSI Target mapping and click Next. You can create and manage the LUN just like working with a volume. See "Create a Volume by Combining Several Hard Disks" on Page 29 for more information about volume creation.

iSCSI LUN (Block-Level) - Multiple LUN on RAID: The iSCSI LUN is created by allocating partial space on a Disk Group. Enter the name for the LUN, choose iSCSI Target mapping and click Next. You can create and manage the LUN just like working with a volume. You can repair or expand it, or change its RAID type, just like using a volume. See "Create a Volume by Allocating Partial Space on a Disk Group" on Page 29 for more information about volume creation.

--------- 1 256 iSCSI LUNs are supported on specific models only. Please visit www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

37 Chapter 4: Manage Storage Space

5 About iSCSI Target mapping:

If you choose Map existing iSCSI targets from the iSCSI Target mapping drop-down menu, you will be prompted to choose an existing iSCSI Target.

If you choose Create a new iSCSI target from the iSCSI Target mapping drop-down menu, you will be prompted to create a new iSCSI Target.

Note: For more information about iSCSI Target creation, see "Manage iSCSI Target with Storage Manager" on Page 34 .

6 Follow the wizard to complete the setup.

Term Explanation

Thin Provisioning: Thin Provisioning is a method for optimizing storage utilization by allocating storage space in a dynamic and on-demand manner. This setting is only available for iSCSI LUN (regular files).

iSCSI Target Mapping: Map the iSCSI LUN to one or more iSCSI Targets.

To remove an iSCSI LUN: By removing an iSCSI LUN, all data on the iSCSI LUN will be deleted. The connection between the iSCSI LUN and any mapped iSCSI Target will also be lost.

1 Select the iSCSI LUN you'd like to remove.

2 Click Remove.

3 Click Cancel to abort or OK to confirm.

To edit an iSCSI LUN: 1 Select the iSCSI LUN you'd like to edit.

2 Click Edit. 3 Edit the Properties and Mapping to your preference.

4 Click OK to save the settings.

Note: To avoid data loss when editing iSCSI LUN capacity, you can only make it larger than the current size.

Synology DiskStation User's Guide

Based on DSM 4.1

38 Chapter 4: Manage Storage Space

Manage Hard Disks with Storage Manager Go to Main Menu > Storage Manager and click the HDD Management tab to manage your hard disks.

Enable Write Cache Support for Hard Disks Write cache support is only effective on hard disks that support it. Enabling cache offers you enhanced performance on your Synology product. However, to ensure data protection, the usage of a UPS device is strongly recommended. It is also highly suggested that the system is shut down properly every time after use.

In other words, while disabling cache offers the benefit of increasing resilience against abnormal power, there is also the possibility of reduction in performance.

To enable write cache support for your disk: 1 Select a disk on the disk list and click Cache Management. 2 Tick Enable write cache. By default, this function is enabled.

3 Click OK.

Run S.M.A.R.T. Test Disk S.M.A.R.T. will help you to examine and report the hard disk status to alert possible disk failures. It is recommended that you replace your disk if errors are detected.

To run S.M.A.R.T. test: 1 Select a disk on the disk list and click S.M.A.R.T. Test. 2 Choose any of the following test methods and click Start: Quick Test Extended Test

3 The latest test results are shown in the Test Result section.

4 Click Close to finish.

Note:

The exact processing time might vary under different system environment. You can also click Schedule and follow onscreen instructions to schedule the S.M.A.R.T. tests.

Synology DiskStation User's Guide

Based on DSM 4.1

39 Chapter 4: Manage Storage Space

To check S.M.A.R.T. info: 1 Select a disk on the disk list and click S.M.A.R.T. Info. The numbers listed can help you to diagnose the status

of your disk.

2 Click Close to finish.

Check Disk Info Here you can see the disk's model name, serial number, firmware version, and total size.

To check disk info: 1 Select a disk on the disk list and click Disk Info.

2 Click Close to finish.

SSD Cache1

SSD cache drives can be installed and mounted in a RAID 0 configuration to boost the read speed of a volume, including iSCSI LUN (Regular Files) on a volume, or iSCSI LUN (Block-Level) on your Synology server. You can mount, check SSD compatibility, and view related information by going to Main Menu > Storage Manager > SSD Cache.

Please refer to your Synology server Quick Installation Guide for information regarding SSD installation. Additionally, refer to Help for information regarding SSD management.

Manage External Disks You can attach external USB or eSATA disks to the USB or eSATA port of your Synology DiskStation for backup or file sharing purposes.2

Go to Main Menu > Control Panel > External Devices to manage the attached external disks.

To attach an external disk: 1 Connect an external USB or eSATA disk to the USB or eSATA port of your Synology DiskStation.

2 A new shared folder named usbshare1 (for USB device) or esatashare (for eSATA device) will be created automatically and ready for access.

--------- 1 SSD cache is supported on specific models only. Visit www.synology.com for more information 2 eSATA is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

40 Chapter 4: Manage Storage Space

Note:

When more than 1 external USB disk is connected, usbshare2, usbshare3 will be created. DiskStation recognizes the following format: EXT3, EXT4, FAT, FAT32, and NTFS. Any unrecognized USB disk

will have to be formatted first before being used on the system.

To get the information of the disk: You can access disk information by clicking Get Info.

To eject or format an external disk: Click Eject or Format.

Note:

For more information about external disks, see its help by clicking the Help button (with a question mark) at the top-right corner.

You can also manage USB printer here. See "Set Synology DiskStation as Print Server" on Page 94 for more information.

41

Chapter

5 Chapter 5: Access your DiskStation from the Internet

You can connect to your Synology DiskStation over the Internet, allowing its services to be accessible from anywhere and anytime.

This chapter explains how to set up Internet connection with the easy-to-use Synology EZ-Internet wizard, or with the more advanced port forwarding function, and register a DDNS hostname for your Synology DiskStation.

Use the EZ-Internet Wizard The EZ-Internet Wizard can set up DiskStation access via the Internet with an easy-to-use wizard, without going through the complicated firewall settings, PPPoE setup, DDNS registration, and router port forwarding configuration.

To use the EZ-Internet wizard: Go to Main Menu > EZ-Internet and follow the wizard to complete the setup.

Set Up Port Forwarding Rules for Router If your Synology DiskStation is within the Intranet, you can set up port forwarding rules for the router to allow your Synology DiskStation to be accessible over the Internet.

Note: Before you start, make sure you have manually assigned a static IP address for your Synology DiskStation. See "Network Interface" on Page 19 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

42 Chapter 5: Access your DiskStation from the Internet

Go to Main Menu > Control Panel > Router Configuration to set up your router and port forwarding rules.

Note: To configure port forwarding rules and assign static IP address, you must have the administrative permission to the router.

Set up Router Before adding port forwarding rules with DSM, you need to set up DiskStation's connection to the router. For more information, click the Help button (with a question mark) at the top-right corner.

Add Port Forwarding Rules Add port forwarding rules to specify the destination ports of your Synology DiskStation that will receive packages from specific router ports.

To add port forwarding rules: 1 Click Create.

2 Do one of the following:

If you want to create port forwarding rules for system services (for example, FTP, Web Station, etc), choose Built-in application and tick the system services.

If you want to create port forwarding rules for custom services, choose Custom port. You can use the following syntax to specify port numbers and range: Use - to describe port range. For example, 6881-6890. Use , to separate ports. For example: 21, 22 or 21,55536-55663.

Note:

Some routers don't allow using custom ports for system services forwarding. See the documentation that came with your router for more information.

Each router port can be used for one forwarding rule only. Using a router port for two or more rules will cause conflicts, and a warning message will appear on the screen. You need to set another port for the rule to avoid conflicts.

3 Click Save.

You may need to wait for a few minutes before the rules start working, depending on the models of your routers.

To test whether your rules are working or not: 1 Select the rules you want to test and click Test Connection.

2 The result will be displayed in the Connection Test Result column.

Synology DiskStation User's Guide

Based on DSM 4.1

43 Chapter 5: Access your DiskStation from the Internet

Register DDNS for DiskStation You can register a DDNS (Dynamic Domain Name System) hostname for your Synology DiskStation, allowing it to be connected anywhere by entering the hostname in the address bar of your web browser.

Once set up, you and your friends no longer need to remember the IP address to access your Synology DiskStation. Simply type in the DDNS hostname on the web browser as you would when connecting to any website. After the setup is complete, the hostname will always point to the external IP address of the Synology DiskStation.

Service Requirement The DDNS server of the service provider is working normally. The gateway connection is normal. Synology DiskStation is able to connect to the DNS server. The following addresses are unblocked in the Firewall: http://members.dyndns.org:80 http://checkip.dyndns.org:80

DDNS will only run in a network environment where there is no proxy server required.

Register a DDNS hostname for Synology DiskStation Go to Main Menu > Control Panel > DDNS and use one of the following methods to enter your DDNS information.

Method 1: Visit any DDNS service provider's website to register a DDNS account 1 Visit any of the following DDNS service providers to register a DDNS account:

http://freedns.afraid.org http://zoneedit.com http://dnspod.com http://changeIP.com http://ddo.jp http://www.selfhost.de/ http://www.dyndns.org/

Synology DiskStation User's Guide

Based on DSM 4.1

44 Chapter 5: Access your DiskStation from the Internet

http://www.no-ip.com/ http://www.3322.org/ http://www.twodns.de/

2 Tick Enable DDNS support and enter the hostname, username, and password for your Synology DiskStation.

3 Click Apply.

Note: Remember to enter the full domain name in the Hostname field. (e.g. philip1234.dyndns.org)

Method 2: Register a DDNS account from Synology 1 Tick Enable DDNS support, choose Synology from the Service provider drop-down menu, and then click

Register Now.

2 In the window that appears, enter the hostname you want in the Hostname field.

3 Enter your account information:

If you already have a Synology account, select Register a new hostname with an existing Synology account and enter the account information in the Email and Password field to log in.

If you don't have a Synology account, select Create a Synology account and register a new hostname, fill out all the required fields, and then click OK to register a new account.

4 Click Apply to finish. The newly registered hostname for your Synology DiskStation will be activated in just a few seconds.

Access DSM Services via QuickConnect QuickConnect is a solution that can help client applications to connect to your DiskStation via the Internet without setting up port forwarding rules. Go to Main Menu > Control Panel > QuickConnect to manage the QuickConnect service.

Client applications with QuickConnect support include the following: DS file (see "Chapter 19: Communicate with Mobile Devices" on Page 175 for more information) Cloud Station (see "Sync Files via Cloud Station" on Page 72 for more information) File sharing services

Synology DiskStation User's Guide

Based on DSM 4.1

45 Chapter 5: Access your DiskStation from the Internet

Note: Before enabling QuickConnect for client applications, make sure relevant DSM services are already enabled.

To enable QuickConnect for client applications: 1 Tick the checkboxes for the applications and then click Apply.

2 You will see your QuickConnect ID in the QuickConnect Info section, which is a combination of numbers used by client applications to gain access to DSM services (see To access DSM services via QuickConnect below for more information). If you want to give your QuickConnect ID a name that is easier to remember, click Customize next to Customize QuickConnect ID and enter your customized ID in the text field.

Note:

The customized ID should consist of alphanumeric characters, "-", and "_", and cannot start with a digit. For better QuickConnect performance, it is recommended that you go to Main Menu > Control Panel > Router

Configuration to configure port forwarding for each service: Cloud Station: 6690 DS file: 5005 DS file (HTTPS): 5006

To access DSM services via QuickConnect: 1 Launch your client application to connect to your DiskStation.

2 When you are prompted to enter the address of your DiskStation, fill in the QuickConnect ID to connect to DSM services via QuickConnect.

Troubleshooting If you see the "Network error occurred" message in the Status field indicating the QuickConnect service is stopped due to network errors, please check the following:

Your DiskStation is connected to an active network (at Main Menu > Control Panel > Network > Network Interface).

The DNS server and default gateway settings are properly set (at Main Menu > Control Panel > Network > General).

When the network errors are fixed, the QuickConnect service should resume automatically within a few minutes.

Synology DiskStation User's Guide

Based on DSM 4.1

46 Chapter 5: Access your DiskStation from the Internet

Set up VPN Connection VPN Server is an add-on package that enables your DiskStation to become a PPTP/OpenVPN VPN (virtual private network) server, allowing DSM local users over the Internet to access resources shared within DiskStation's local area network. For more information about VPN, refer to here.

Set up your DiskStation as a VPN Server To install VPN Server on your DiskStation, go to Main Menu > Package Center. For more information about VPN Server, run and launch the package, and then click its Help button (with a question mark) at the top-right corner. To learn more about how to access DiskStation's VPN Server with a VPN client, refer to the VPN Server User's Guide available at Synology's Download Center.

Connect your DiskStation to a VPN Server Go to Main Menu > Control Panel > VPN to set your DiskStation as a VPN client to connect to a VPN server, and then gain access to the virtual private network. For each VPN server, you can create or modify its connection profile, and then use the profile to connect to the server with a simple click. For more information about how to set your DiskStation as a VPN client, click the Help button (with a question mark) at the top-right corner.

Note: You are not allowed to set your DiskStation as a VPN server and client at the same time.

47

Chapter

6 Chapter 6: Enhance Internet Security

After your Synology DiskStation is available on the Internet, you will need to safeguard it against any attacks from Internet hackers.

This chapter explains how to set up firewall, control outgoing traffic and enable auto block.

Prevent Unauthorized Connection with Firewall The built-in firewall can prevent unauthorized logins, and control which services can be accessed. In addition, you can choose to allow or deny access to certain network ports from specific IP addresses.

Go to Main Menu > Control Panel > Firewall > Allow / Deny to create firewall rules.

Note: You can create up to 100 rules for a network interface.

To create a firewall rule: 1 Click the LAN, Bond (multiple-LAN models only), PPPoE, or Wireless tab, depending on the type of your

network connection.

2 Click Create to open the settings window.

3 Choose an option in the Ports section. You can apply the rule to all ports or selected ports using one of the following options:

All: Choose this option to apply the rule to all ports on Synology DiskStation. Select from a list of built-in applications: Tick the system services that will be included in the rule. Custom: Specify the type and protocol of the port, and enter the custom port number.

You can enter up to 15 ports separated with comma, or by specifying a port range.

Synology DiskStation User's Guide

Based on DSM 4.1

48 Chapter 6: Enhance Internet Security

4 Specify the source IP address in the Source IP section. You can choose to allow or deny access from a particular source IP using one of the following options:

All: Choose this option to apply the rule to all source IP addresses. Single host: Choose this option to apply the rule to an IP address. Subnet: Choose this option to apply the rule to a subnet.

5 Choose Allow or Deny in the Action section to allow or deny the source IP address to access the specified ports.

Note:

When you combine multiple LAN ports with link aggregation, firewall will apply the rules from the first network interface, and reserve the rules of the second network interface. For more information about link aggregation, see "LAN" on Page 19.1

If your system has multiple network ports connecting to the same subnet, the firewall rules might not work properly.

To change the priorities of rules: Reorder the rules by dragging any of them up or down, or use the Up, Down button. Rules at the top will have higher priorities.

To disable rules: Uncheck the checkboxes next to the rules.

To delete rules: Select the rules you want to delete and click Delete.

Control the Outgoing Traffic of Services Traffic control aims to control the outgoing traffic of services running on DiskStation. Once you select a service, you need to set up the Guaranteed Bandwidth and Maximum Bandwidth to limit its outgoing traffic.

Go to Main Menu > Control Panel > Firewall > Traffic Control to create traffic control rules.

Note: You can create up to 100 rules for a network interface.

To create a traffic control rule: 1 Click the LAN, Bond (multiple-LAN models only), PPPoE, or Wireless tab, depending on the type of your

network connection.

2 Click Create to open the settings window. --------- 1 Link Aggregation is supported on specific models only.

Synology DiskStation User's Guide

Based on DSM 4.1

49 Chapter 6: Enhance Internet Security

3 Choose an option in the Ports section. You can apply the rule to all ports or selected ports using one of the following options:

All: Choose this option to apply the rule to all ports on Synology DiskStation. Select from a list of built-in applications: Tick the system services that will be included in the rule. Custom: Specify the type and protocol of the port, and enter the custom port number.

You can enter up to 15 ports separated with comma, or by specifying a port range.

4 Specify the Guaranteed Bandwidth and Maximum Bandwidth. For more information about the bandwidth setting formula, click the Help button (with a question mark) at the top-right corner.

To change the priorities of rules: Reorder the rules by dragging any of them up or down, or use the Up, Down button. Rules at the top will have higher priorities.

To disable rules: Uncheck the checkboxes next to the rules.

To delete rules: Select the rules you want to delete and click Delete.

Automatically Block Suspicious Login Attempts Auto block allows you to prevent unauthorized login. After enabling the service, an IP address will be blocked if it has too many failed login attempts. Failed login attempts via SSH, Telnet, rsync, Network Backup, Shared Folder Sync, FTP, WebDAV, Synology mobile apps, File Station, or DSM will all add up.

Go to Main Menu > Control Panel > Auto Block to manage auto block.

To enable auto block: 1 Tick Enable auto block.

2 Enter the following information to block an IP address with a number of failed login attempts within the specified minutes :

Login attempts: The number for failed login attempts Within (minutes): The number of minutes

Synology DiskStation User's Guide

Based on DSM 4.1

50 Chapter 6: Enhance Internet Security

3 Tick Enable block expiration and enter a number of days in the Unblock after (days) field if you want to unblock the IP address after the specified days.

Note: The IP address will remain blocked if Unblock after (days) is set to 0.

4 Click Apply.

To manage the blocked IP addresses: 1 Click Block List to check the blocked IP addresses.

2 If you want to remove an IP address from the block list, select the IP and click Remove.

3 Click Finish.

51

Chapter

7 Chapter 7: Set Up File Sharing

File sharing is one of Synology DiskStation's major functions. Synology DiskStation can become the file sharing center within the Intranet or over the Internet, allowing users to access its files anytime and anywhere.

This chapter explains how to enable the support for file sharing protocols for all platforms, create and manage users and groups, set up shared folders, and allow or deny access to the shared folders, applications or subfolders from specific users or groups.

Enable File Sharing Protocols for All Platforms This section tells you how to enable Synology DiskStation to support file sharing protocols for all platforms.

Synology DiskStation supports the following file sharing protocols: For Windows: SMB/CIFS (My Network Places), FTP, WebDAV For Mac: SMB, FTP, AFP, WebDAV For Linux: SMB, FTP, NFS, WebDAV

Manage Windows File Service Click the Windows File Service tab at Main Menu > Control Panel > Win/Mac/NFS to enable Synology DiskStation to be the Windows file server (CIFS server).

To enable Windows file service: 1 Tick Enable Windows file service.

2 Click Apply.

Synology DiskStation User's Guide

Based on DSM 4.1

52 Chapter 7: Set Up File Sharing

Advanced Settings

Workgroup You can assign the system to be a member of a specific Workgroup for network management purpose.

Note:

The name of a Workgroup can contain 1 to 15 characters. Invalid characters include: [ ] ; : " < > * + = \ / | ? , If your workgroup name includes the character '&', users of Mac OS 10.4.4 or earlier versions will not be able

to connect to Synology DiskStation via samba.

WINS Server Microsoft Windows Internet Name Service (WINS) is a NetBIOS name- to-IP-address mapping service. Window users will locate the system more easily on TCP/IP networks if the system has been configured to register with a WINS server.

Support Windows offline files This option will enable support for Windows offline files and automatically enables CIFS opportunistic locking. However, enabling this option will affect DiskStation performance when accessing shared folders via network.

Optimize CIFS database operations Checking this option will disable "Opportunistic Locking" of CIFS, resulting in increased performance when database applications access database files on the shared folder of the Synology DiskStation via network.

Enable Local Master Browser Enable Synology DiskStation to be the Local Master Browser.

Note: Enabling this function will disable the HDD hibernation mechanism and activate the guest account without password.

Enable Transfer Log Enable this function to record the log of all file transfer via the smb protocol. After the function is enabled, you can see the log by clicking View Logs.

Manage Mac File Service Click the Mac File Service tab at Main Menu > Control Panel > Win/Mac/NFS to make Synology DiskStation a Mac file server (AFP Server).

To enable Mac file service: 1 Tick Enable Mac file service checkbox to make Synology DiskStation a Mac file server (AFP server).

2 Set AppleTalk Zone or Time Machine backup folder if necessary. (See the sections below for more information.)

3 Click Apply.

Synology DiskStation User's Guide

Based on DSM 4.1

53 Chapter 7: Set Up File Sharing

More Information

About AppleTalk Zone: A "Zone" is a logical grouping of devices in an AppleTalk network. If there are AppleTalk zones configured in your own network, the system will join the default zone automatically. You can also configure the system to join other available zones.

About Time Machine backup folder: To backup data from Time Machine to Synology DiskStation, select a shared folder from the drop-down menu.

Shared folders that are being used for other services will not be available for Time Machine.

To enable Bonjour printer broadcast: Tick Enable Bonjour Printer Broadcast to allow Mac clients to browse and locate the printer connected to Synology DiskStation.

Enable NFS Service for Linux Clients Go to Main Menu > Control Panel > Win/Mac/NFS to allows Linux client to access DiskStation data.

To enable the NFS service: 1 Tick Enable NFS.

2 Click Apply.

If you want to configure Linux client's NFS access privileges to the shared folders, see "Allow Users or Groups to Access Shared Folders" on Page 62 for more information.

Join DiskStation to Directory Service Go to Main Menu > Control Panel > Directory Service to join your Synology DiskStation to a directory service as a Windows domain or LDAP client. When DiskStation is joined to a directory service, you can manage domain/LDAP users' access privileges to shared folders and DSM applications and enable their home service.

To join a Windows domain: 1 Click the Domain tab, enter the domain name in the Domain field and DNS server (optional) in the DNS

Server field, and click Apply.

Synology DiskStation User's Guide

Based on DSM 4.1

54 Chapter 7: Set Up File Sharing

2 In the window that appears, enter the user name and password for the administrator of the domain server, and click OK.

After Synology DiskStation joins the domain, domain users can log in to Synology DiskStation with their domain account and password.

Note:

If your domain user name includes % and $, you might not be able to access your home folder. Please ask your domain administrator to give you a new user name.

Domain groups Domain Admins and Enterprise Admins will be added to the local group administrators automatically. In other words, domain users in these groups have administrative right on the DiskStation, including performing DSM/CIFS/FTP/AFP/WebDAV applications.

You can also configure domain users access privileges to the shared folders on Synology DiskStation. See "Allow Domain Users or Groups to Access Shared Folders" on Page 63 for more information.

More Information

About DNS server: You are recommended to specify a DNS server to help Synology DiskStation search for the domain. However, if the domain is not registered on the DNS server, the procedure of joining domain may fail.

About advanced domain options: In most cases, you do not need to fill in any of the advanced domain option. Advanced domain options are needed only for specific domain environment.

DC IP: Specify a DC (Domain Controller) IP and Synology DiskStation will try to communicate with it. If there is more than one IP, insert a comma in between each of them. Add an asterisk (*) after the last DC IP if you wish, and Synology DiskStation will try to communicate with other DC when all specified ones failed. You will need to add a comma between the asterisk and the last IP.

Domain NetBIOS name: Specify the NetBIOS name of the domain. Domain FQDN (DNS name): Specify the FQDN (DNS name) of the domain.

To bind DiskStation to an LDAP server: 1 Click the LDAP tab, and tick Enable LDAP Client. 2 Enter the IP address or domain name of the LDAP server in the LDAP Server address field.

3 Choose an encryption type from the Encryption drop-down menu to encrypt LDAP connection to the LDAP server.

4 Enter the Base DN of the LDAP server in the Base DN field.

5 To allow LDAP users to access DiskStation files via CIFS, tick Enable Windows CIFS support. For more information, click the Help button (with a question mark) at the top-right corner.

6 Click Apply.

7 Enter the Bind DN (or LDAP administrator account) and the password in the fields, and then click OK.

Note: The supported LDAP standard is LDAP version 3 (RFC2251).

Synology DiskStation User's Guide

Based on DSM 4.1

55 Chapter 7: Set Up File Sharing

Host LDAP Service with Directory Server Directory Server is an add-on package based on LDAP version 3 (RFC2251) that allows your DiskStation to become an account administration center to centralize the account management of all connecting clients, and provides authentication service for them.

To install Directory Server on your DiskStation, go to Main Menu > Package Center. For more information about Directory Server, run and launch the package, and then click its Help button (with a question mark) at the top- right corner. To learn more about how to access DiskStation's Directory Server with a LDAP client, refer to the Directory Server User's Guide available at Synology's Download Center

Manage Users and Groups Go to Main Menu > Control Panel > User or Group to create users or groups, and allow or deny their access to different shared folders.

Synology DiskStation User's Guide

Based on DSM 4.1

56 Chapter 7: Set Up File Sharing

Create and Edit Users Follow the steps below to create a user account. The user can login to edit his/her account info after the user account has been established. You can also choose to set an account expiration date or disallow the user to change account password.

To create a user account: 1 Click Create to open the User Creation Wizard.

2 Enter the user name and other information, and click Next. 3 In the Join Group section, tick the checkboxes to select the user group for the user, and click Next. By default,

the user is categorized under the users group.

Note: For more information about groups, see "Create and Edit Groups" on Page 59.

4 In the Assign Privileges shared folder section, do the following:

a Assign the following shared folder privileges for the user:

Read/Write: The user can access and make changes to the files and subfolders in the shared folder. Read only: The user can access the files and subfolders in the shared folder, but cannot make changes

to them. No access: The user cannot access the files and subfolders in the shared folder.

b See Privilege preview to see the users privilege that is decided based on the privileges setting of the user and the groups joined by the user.

c See Group privileges for the shared folder privileges of the group the user belongs to.

Note:

When you encounter privilege conflicts, the privilege priority is as follows: No access > Read/Write > Read only.

For more information about editing a group's access privileges to shared folders, see "Allow Users or Groups to Access Shared Folders" on Page 62.

5 In the User quota setting section, do the following if you want to set the maximum storage quota for the user.

a Tick Enable quota and enter a value under the Quota column.

b Click Next. 6 In the Assign Privileges applications section, assign the application privileges for this user, and click Next. 7 Tick the checkboxes under or next to Enable speed limit to apply file transfer speed limit.

8 Click Apply to finish.

To create a user account by importing users list: 1 Create a text file which contains the following tab-delimited information in each line:

Username Password Description Email Quota (MB) in volume 1 Quota (MB) in volume 2 (and so on)

Note:

All fields are optional except Username. An example of the text file is shown as follows: eddy 1234 father eddy@abc.com 80000

rosy 5678 mother rosy@abc.com 80000

chaddy 8901 brother chaddy@abc.com 20000

eric 2345 cousin eric@abc.com 20000

Synology DiskStation User's Guide

Based on DSM 4.1

57 Chapter 7: Set Up File Sharing

2 Save the text file in UTF-8 encoding.

3 Go to Main Menu > Control Panel > User and choose Create > Import Users.

4 Choose the text file and click OK to start uploading. Tick Overwrite duplicate accounts if you want to replace the existing duplicate accounts with the one from the users list.

After submission, a dialog will show the list of imported users.

Note: Users with abnormal status will not be imported.

To edit a user: 1 Select the user you want to edit from the users list and click Edit or double-click the user.

2 Make changes to the settings and click OK.

Note:

If you disable an account, the account will stop functioning. The quota value should be an integer greater than or equal to 0 GB, and less than the disk/volume capacity. A

quota value of 0 means unlimited quota size. If there is more than one volume on the server, you can set a quota for the user on every volume. Email information on the "Notification" page must be set correctly in order for the system to notify the user by email

after the account information has been created or modified. When setting speed limit for a user, you will see numbers under Result if there is already a group speed limit

applied to the user. The speed limit assigned to a user will not be included in the speed limit of the group that the user belongs to.

To search for a user: Type the name of the user in the Search field and press Enter (PC) or Return (Mac) on your keyboard. The search result will be displayed in the users list below.

This function is especially useful when there are numerous users for your Synology DiskStation.

To delete a user: Select the user you want to delete and click Delete.

Note: To see domain users in the users list, you must join the domain and assign shared folder privileges for the users. For more information about Windows ADS domain, see "Join DiskStation to Directory Service" on Page 53.

Apply Password Strength Rules You can enable password strength service to make sure DSM users password is secure enough to withstand malicious login attempt.

Note:

Password Strength rules only work for passwords created or modified after the Password Strength service is enabled. Existing passwords wont be affected by the rules.

The rules wont apply to the passwords of users created by importing users list.

To apply password strength rules: 1 Click Password Strength.

2 Tick Apply password strength rules.

3 Tick any of the following rules:

Exclude name and description of user from password: The password must not contain user name or description.

Allow mixed case: Mixed case letters are allowed in password. Include numeric characters: The password must contain at least one numeric character (0~9). Include special characters: The password must contain at least one special character (i.e., ~, `, !, @, #, $,

%, ^, &, *, (, ), -, _, =, +, [, {, ], }, \, |, ;, :, ', ", <, >, /, ?).

Synology DiskStation User's Guide

Based on DSM 4.1

58 Chapter 7: Set Up File Sharing

Minimum password length: The password must be longer than the specified value. The length should be a number between 6 and 127.

4 Click Apply.

To cancel password strength rules: 1 Click Password Strength.

2 Uncheck Apply password strength rules.

3 Click Apply.

Create User's Home Folder Each DSM user (except for guest) can have his/her own folder called the home folder, which is accessible only by the user and the system administrator. For DSM admin and users belonging to the administrators group, DSM users home folders are here: homes/[Username]

To enable user home service: 1 Click User Home.

2 Tick Enable user home service.

3 If there is more than one volume on Synology DiskStation, select where you want the homes folder to be stored.

4 Click OK.

To disable user home service: 1 Click User Home.

2 Uncheck Enable user home service.

When the user home service is disabled, the homes folder will be kept but accessible by admin only. Users can access their home folders again if the user home service is enabled again.

Note:

To delete the homes folder, the user home service must be disabled first. The domain user home service would be disabled if the local user home service is disabled.

Create Domain/LDAP Users Home Folder If you have joined your DiskStation to a directory service as a Windows domain or LDAP client, you can go to Main Menu > Control Panel > Directory Service > Domain users or LDAP user to create domain/LDAP users' home folder.

To create the home folders for domain/LDAP users: 1 Click User Home.

2 Tick Enable home service for domain users or Enable home service for LDAP users.

3 Click OK.

For DSM admin or users belonging to the administrators group (including domain administrators), domain/LDAP users home folders are in the folder named @DH-domain name (for domain users) or @LH- FQDN name (for LDAP users). The name of the user's home folder is the user account plus a unique number.

Like local users, all domain/LDAP users can access their own home folder via CIFS, AFP, FTP, WebDAV, or File Station.

admin and users belonging to the administrators group can access all personal folders located in the homes default shared folder.

Synology DiskStation User's Guide

Based on DSM 4.1

59 Chapter 7: Set Up File Sharing

Note:

To delete the homes shared folder, user home service must be disabled first. Enabling domain/LDAP user home service will also enable the local user home service if it's not enabled yet. The domain user home service would be disabled if the local user home service is disabled.

Create and Edit Groups Go to Main Menu > Control Panel > Group to create and edit a group, add users to the group, and then edit the group's properties, saving you the trouble of editing users one by one.

Groups created by default include the following: administrators: Users belonging to the administrators group have the same administrative privilege as

admin. users: All users belong to the users group.

To create a new group: 1 Click Create and enter the group name and description.

2 Click OK.

To edit a group's name and description: 1 Select the group you want to edit from the groups list and click Edit or double-click the group.

2 Make changes to the settings and click OK.

To delete a group: Select the group you want to delete from the groups list and click Delete.

To add or remove group members: 1 Select the group you want to add users to from the groups list and click Edit Members.

2 Click Add or Remove,select users from the users list, and click OK. (Press and hold Shift or Ctrl while making multiple selections.)

3 Click Finish.

Note: For more information about editing a group's access privileges to shared folders or applications, see "Allow Users or Groups to Access Shared Folders" on Page 62 and "Allow Users to Access Applications" on Page 59 for more information.

Allow Users to Access Applications Go to Main Menu > Control Panel > Application Privileges to decide which applications could be accessed by a user.

To quickly find the user whose application privileges you want to modify: 1 Click the Local User or Domain User, or LDAP User tab, depending on which type of users whose

application privileges you want to modify.

2 Do any of the following:

Use the drop-down menus next to Edit to view users with or without access privilege to the specified application.

Enter the user's name in the search field and press "Enter" on your keyboard. 3 Wait for a while before the filter result is displayed.

4 Do any of the following if you want to see the complete users list:

Choose Privilege includes and any from the drop-down menus. Delete the name you entered in the search field and press "Enter" on your keyboard.

To allow a user to access applications for Synology DiskStation: 1 Click the Local User, Domain User, or LDAP User tab, depending on which type of users whose application

privileges you want to modify.

Synology DiskStation User's Guide

Based on DSM 4.1

60 Chapter 7: Set Up File Sharing

2 From the users list, select the users whose application privileges you want to modify. (Press and hold Shift or Ctrl while making multiple selections.)

3 Click Edit and tick the checkboxes to grant access to the applications. You can also tick Grant to grant access to all applications.

4 Click OK.

Note: The users list excludes admin and guest.

Set Up Shared Folders Go to Main Menu > Control Panel > Shared Folder to manage the shared folders, which are the root folders of Synology DiskStation. (Folders within the shared folders are called subfolders.) You can store data in the shared folders and share them with users or groups with access privileges.

Built-in Shared Folders Created by the System System built-in shared folders are created when the services or applications requiring the folders are enabled.

System built-in shared folders include the following: Name Description

public The public folder will be created automatically after the first time you set up Synology DiskStation.

web The web folder contains contents of your website. It will be created automatically when Web Station is enabled. For more information about Web Station, see "Use Web Station to Host Websites" on Page 89.

photo

The photo folder contains photos and videos you want to share on Photo Station. It will be created automatically when Photo Station or DLNA/UPnP Media Server is enabled. For more information about Photo Station and Media Server, see "Chapter 12: Share Photos, Videos, and Blogs with Photo Station" on Page 100 and "Manage DLNA Media Server" on Page 157.

music The music folder contains music you want to share on Audio Station. It will be created automatically when Audio Station is enabled. For more information about Audio Station, see "Chapter 13: Play Music with Audio Station" on Page 112.

video The video folder contains videos you want to browse through DLNA/UPnP DMA. It will be created automatically when Media Server is enabled. For more information about Media Server, see "Manage DLNA Media Server" on Page 157.

Synology DiskStation User's Guide

Based on DSM 4.1

61 Chapter 7: Set Up File Sharing

Name Description

surveillance

The surveillance folder contains Surveillance Station recordings. It will be created automatically when Surveillance Station is enabled. It is read-only and can only be accessed by the system administrator. For more information about Surveillance Station, see "Chapter 16: Safeguard Your Environment with Surveillance Station" on Page 146.

home The home folder provides a private space for each user to store data where only the user can access. It will be created automatically when User Home is enabled. For more information about User Home, see "Create User's Home Folder" on Page 58.

homes The homes folder contains the home folders of all users. It will be created automatically when User Home is enabled. Only system administrator can access and manage all users' home folders. For more information about User Home, see "Create User's Home Folder" on Page 58.

NetBackup The NetBackup folder is created automatically when Network Backup Service is enabled. For more information about network backup, see "Network Backup" on Page 83.

usbshare

The usbshare[number] folder is created automatically when you connect an USB disk to Synology DiskStations USB port. For more information about external USB disks, see "SSD Cache

SSD cache drives can be installed and mounted in a RAID 0 configuration to boost the read speed of a volume, including iSCSI LUN (Regular Files) on a volume, or iSCSI LUN (Block-Level) on your Synology server. You can mount, check SSD compatibility, and view related information by going to Main Menu > Storage Manager > SSD Cache.

Please refer to your Synology server Quick Installation Guide for information regarding SSD installation. Additionally, refer to Help for information regarding SSD management.

Manage External Disks" on Page 39.

esatashare

The esatashare folder is created automatically when you connect an eSATA disk to Synology DiskStations eSATA port. For more information about external eSATA disks, see "SSD Cache

SSD cache drives can be installed and mounted in a RAID 0 configuration to boost the read speed of a volume, including iSCSI LUN (Regular Files) on a volume, or iSCSI LUN (Block-Level) on your Synology server. You can mount, check SSD compatibility, and view related information by going to Main Menu > Storage Manager > SSD Cache.

Please refer to your Synology server Quick Installation Guide for information regarding SSD installation. Additionally, refer to Help for information regarding SSD management.

Manage External Disks" on Page 39.

Create a Shared Folder If you are admin or a user belonging to the administrators group, you can also create shared folders and assign access privileges to the folders.

To create a new shared folder: 1 Click Create.

2 Enter the name and description for the shared folder, and select a volume1

3 Tick Hide this shared folder in "My Network Places" if you want to hide the folder in Windows "My Network Places".

where the folder will be created.

Note: If you have access privilege to a shared folder hidden in "My Network Places", you can still access it by pressing Windows-R and entering \\Synology_Server_Name\Shared_Folder_Name in the Open field.

4 Tick Enable Recycle Bin, and a subfolder will be created to store deleted files. Tick Restrict access to administrators only if you want Recycle Bin to be accessible for administrators only.

5 Tick Hide unreadable folders and files, and users who have no Read permission will not see the folders or files.

--------- 1 Multiple volumes are available only on DiskStation with more than 1 bay.

Synology DiskStation User's Guide

Based on DSM 4.1

62 Chapter 7: Set Up File Sharing

6 If you want to encrypt the shared folder, do the following:

a Tick Encrypt this shared folder in the window that appears, enter and confirm the encryption key, and then choose the size of the AES encryption key in the Encryption key size(bit) field.

b Tick Mount automatically on startup to mount the encrypted folder automatically for access. If you didn't tick this checkbox, the encrypted folder will be unmounted next time Synology DiskStation restarts. To view or access an unmounted folder, you will need to mount the folder manually by importing or entering the encryption key.

7 If you want to define Windows ACL privileges for the shared folder, click the Windows ACL tab. See "Define Windows ACL Privileges for Shared Folder" on Page 64 for more information.

8 If you want to index contents within this shared folder, click the File Indexing tab. See "Index Shared Folder Contents" on Page 65 for more information.

9 Click OK.

Note: One Synology DiskStation can contain up to 100 or 2001

Remove a Shared Folder

shared folders, including the built-in shared folders.

If you are admin or a user belonging to the administrators group, you can remove any shared folder created by yourself.

To remove a shared folder: 1 Select the shared folder you want to remove from the shared folder list.

2 Click Delete, and tick the checkbox on the dialogue prompt for confirmation.

3 Click OK.

Important: Removing any shared folder also removes all data within it. If you still need the data, back them up first.

Allow Users or Groups to Access Shared Folders Go to Main Menu > Control Panel > Shared Folder to allow or deny users' or groups' access to the shared folders. To allow users or groups to access a shared folder:

1 Select the shared folder you want to edit from the shared folders list, click Privileges and choose Privileges Setup from the drop-down menu to open the settings window.

2 Click the Privilege Setup tab, and select any of the following from the drop-down menu:

System Internal user: Anonymous FTP user. Before allowing anonymous FTP users to connect to a shared folder, you need to allow their access to the folder first.

Local users: Synology DiskStation users (including guest). See "Create and Edit Users" on Page 56 for more information.

3 Tick or uncheck the following privileges to assign access privileges for the users or groups: Read/Write (RW): The user or group can access and make changes to the files and subfolders in the

shared folder. Read only (RO): The user or group can access the files and subfolders in the shared folder, but cannot

make changes to them. No access (NA): The user or group cannot access the files and subfolders in the shared folder.

Note: To set the access privileges to subfolders, you can use File Station. See "View or Change File or Folder Permissions" on Page 79 for more information.

4 Click the Advanced privileges tab if you want to do any of the following: Disable directory browsing Disable modification of existing files Disable file downloading

--------- 1 200 shared folders are supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

63 Chapter 7: Set Up File Sharing

5 Click OK.

Note:

When you encounter privilege conflicts, the privilege priority is as follows: No access > Read/Write > Read only. When you create a new shared folder, if the access privilege of admin (or a user belonging to the administrators

group) to the folder is set as No access, then admin (or the user belonging to the administrators group) will only be able to see the folder by going to Main Menu > Control Panel > Shared Folder.

To allow Linux clients to access a shared folder: 1 Select the shared folder you want to edit from the shared folder list, click Privileges and choose NFS

Privileges.

2 Click Create to open the settings window.

3 Enter a Hostname or IP. You may specify a host in three ways:

Single Host: The FQDN (fully qualified domain name) or an IP address. Wildcards: *,* .synology.com IP networks: 203.74.205.32/255.255.252.0, /24

4 Assign Privilege, assign Root Squash, or tick Enable asynchronous, and click OK.

5 Click OK.

Term Explanation

Asynchronous: NFS servers will reply to requests before the changes on the file are completed.

Allow Domain Users or Groups to Access Shared Folders If you have joined your DiskStation to a directory service as a Windows domain or LDAP client, you can go to Main Menu > Control Panel > Directory Service > LDAP User, LDAP Group, Domain users, or Domain Group to set up and modify the shared folder privileges of a domain/LDAP user or group.

To manage domain/LDAP users or groups' shared folder privileges: 1 Select the user or group you want to edit, and then click Edit. 2 Tick the checkboxes to manage the shared folder privileges. If you are editing the shared folder privileges of a

user, you can see the user's actual privilege under the Preview column.

Note: In the event of privilege conflicts, the privilege priority will be: No access (NA) > Read/Write (RW) > Read only (RO).

3 Click OK.

Encrypt a Shared Folder Go to Main Menu > Control Panel > Shared Folder to encrypt your shared folder. 1

The AES 256-bit encryption can block off all unauthorized access attempts. Without the encryption key, other people will not be able to use the encrypted data even if they remove the hard drives from your Synology DiskStation and mount it on their device.

To encrypt a shared folder: 1 Select a shared folder you want to encrypt, and then click Edit to open the settings window.

2 Tick Encrypt this shared folder, enter the encryption key in the Encryption key field, and enter the same key again in the Confirm key field.

3 Choose the size of the AES encryption key from the Encryption key size (bit) drop-down menu.

4 Tick Mount automatically on startup to mount the encrypted folder automatically after Synology DiskStation starts up next time. By default, encrypted shared folder will be unmounted automatically on startup for security reasons.

--------- 1 Shared folder encryption is supported on specific models only.

Synology DiskStation User's Guide

Based on DSM 4.1

64 Chapter 7: Set Up File Sharing

Note:

You can also encrypt a folder when you create it. The following built-in shared folders are not allowed for encryption since they are associated with system services:

web, photo, music, video, surveillance, download, Netbackup. Encrypted shared folders cannot be accessed via NFS. If you encrypt a shared folder containing NFS rules, they

will be removed.

Edit an Encrypted Folder After the folder is encrypted, you can use the Encryption drop-down menu to edit the folder.

The items shown in the menu depend on the status of the selected shared folder: For unencrypted shared folder, the Encryption drop-down menu is disabled. For an encrypted shared folder which is mounted, you can choose Unmount from the Encryption drop-

down menu to unmount the folder, or Export key to save the encryption key. For an encrypted shared folder which is unmounted, you can choose Mount from Encryption drop-down

menu, and then enter or import the encryption key to mount the folder for access.

Note:

It is very important to remember the encryption key. It is strongly recommended that you export and save the encryption key. If you forget or lose the key, there is no way to rescue the encrypted data.

If an encrypted folder is unmounted, you cannot rename it or change its volume location.

Define Windows ACL Privileges for Shared Folder Go to Main Menu > Control Panel > Shared Folder to define ACL privileges for a shared folder. Windows Access Control List (ACL) is a list of privileges or permissions that determine specific access rights under the Windows environment. This can help administrator define access control rules for an individual file or a directory, and give different access rights for individual user or group.

Through Windows ACL, you can assign different privileges to local and domain users in the system. The privileges apply to all file-related applications, such as FTP, File Station, NFS, AFP, WebDAV, etc.

To define Windows ACL settings for a shared folder: 1 Go to Main Menu > Control Panel > Shared Folder. 2 Click Create to create a shared folder, or select an existing shared folder and click Edit to edit the folder.

Synology DiskStation User's Guide

Based on DSM 4.1

65 Chapter 7: Set Up File Sharing

3 Under the Shared Folder Info tab, enter the fields required.

4 Under the Windows ACL tab, click Allow editing Windows Access Control List. 5 Click OK to finish.

To edit Windows ACL settings using File Station: Go to Main Menu > DSM Help, and then go to Control Panel > Shared Folder > Windows ACL for detailed instructions.

To edit Windows ACL settings using Windows Explorer: Refer to the How To article for detailed instructions.

When there's a conflict between Windows ACL settings and the shared folder privileges, the system will automatically adopt the settings the two may have in common. For example, if the shared folder privilege is "Read/Write", but ACL privilege is "Read". Then final privilege will be only be "Read".

Note:

You can only add up to 200 ACL explicit permission entries for a file or folder. Windows ACL is only supported on EXT4 file system. For previous DSM 2.3 users, you need to create at least one

EXT4 volume to use ACL feature. This means, you have to format at least one hard disk and re-create a volume. Formatting DiskStation will result in erasing all stored data and settings. Please make sure all your data is backed up before processing.

To define new privileges for domain users, make sure DSM and Windows clients are in the same domain. The ACL privileges of the following shared folders cannot be modified: photo, surveillance, web, homes,

NetBackup, usbshare, sdshare, esatashare.

Index Shared Folder Contents You can index the contents of a shared folder for rapid file search by File Station.

To index files in a shared folder: 1 Select the shared folder you want to index.

2 Click Edit and then click the File Indexing tab.

3 Tick Enable file indexing.

4 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

66 Chapter 7: Set Up File Sharing

Note: See "Search for Files or Folders" on Page 75 for more information about searching files with File Station.

67

Chapter

8 Chapter 8: Access Files from Anywhere

When you have set up users or groups with proper access privileges to the shared folders, they can share their files with your Synology DiskStation from anywhere.

This chapter explains the ways to access the Synology DiskStation shared folders within the Intranet or over the Internet.

Access Files within the Intranet This section explains how to allow users to use Windows, Mac, or Linux computer to access shared folders on Synology DiskStation within the Intranet.

Note: Before accessing, make sure the relative file sharing protocols have been enabled for your Synology DiskStation. See "Enable File Sharing Protocols for All Platforms" on Page 51 for more information.

Access Shared Folders from Windows To access shared folders from Windows, you can use any of the following methods.

Method 1: Use Synology Assistant to map the shared folders as network drives. 1 Run Synology Assistant and select the server from the server list.

2 Click Map Drive and follow the onscreen steps to finish the setup.

Upon completion, you can access the mapped shared folder directly in Windows Explorer.

Method 2: Use the Run window. 1 Press Windows-R to open the Run window.

2 Enter \\Synology_Server_Name\Shared_Folder_Name in the Open field.

Synology DiskStation User's Guide

Based on DSM 4.1

68 Chapter 8: Access Files from Anywhere

Method 3: Use Windows Explorer. 1 Open a Windows Explorer window and choose Tools > Map network drive to show the Map Network Drive

window.

2 Choose a drive number from the Drive drop-down menu.

3 Locate the shared folder by doing one of the following:

Enter \\Synology_Server_Name\Shared_Folder_Name in the Folder field. Click Browse to locate the shared folder, and then click OK.

4 Click Finish.

5 Enter your user name and password for Synology DiskStation Manager and click OK.

Upon completion, you can access the mapped shared folder directly in Windows Explorer.

Synology DiskStation User's Guide

Based on DSM 4.1

69 Chapter 8: Access Files from Anywhere

Access Shared Folders from Mac 1 Choose Go > Connect to Server from the menu bar.

2 Type Synology DiskStation's IP address or server name (appended with .local) preceded by smb:// or afp:// in the Server Address field and click Connect. (e.g. smb://EricaWang.local or afp://192.168.0.2)

Note: For better performance, it is recommended that you connect to the shared folders via SMB.

3 Select the shared folder you want to access. Upon completion, you can access the shared folder in the Finder window.

Access Shared Folders from Linux 1 In Synology DiskStation Manager, Go to Main Menu > Control Panel > Shared Folder. 2 Select the shared folder you want to access, click NFS Privileges, andfind the mount path at the bottom of

the window that appears.

Note: for more information about NFS Privileges, see "Allow Users or Groups to Access Shared Folders" on Page 62.

3 On a Linux computer, enter the mount path to mount the shared folders.

Synology DiskStation User's Guide

Based on DSM 4.1

70 Chapter 8: Access Files from Anywhere

Access Files via FTP If your Synology DiskStation is accessible over the Internet, you can use a FTP application to access the shared folders.

Note: For more information about making Synology DiskStation accessible over the Internet, see "Chapter 5: Access your DiskStation from the Internet" on Page 41.

Go to Main Menu > Control Panel > FTP to enable FTP service, allowing users to upload or download Synology DiskStation data via FTP.

To enable FTP service: 1 Tick Enable FTP service (No encryption), Enable FTP SSL/TLS encryption service (FTPS), or Enable

SFTP service based on your needs.

2 Set the port number and the port range of Passive (PASV) FTP.

3 Click Apply.

For more information about managing the FTP service, click the Help button (with a question mark) at the top- right corner.

Connect to Synology DiskStation Using a FTP Application Open any FTP application on your computer and enter the following information to connect to Synology DiskStation:

Synology DiskStation's IP address or domain name Your user account and password The port number (The default number is 21)

Synology DiskStation User's Guide

Based on DSM 4.1

71 Chapter 8: Access Files from Anywhere

Access Files via WebDAV By enabling WebDAV or CalDAV (at Main Menu > Control Panel > WebDAV), you can remotely manage and edit files or calendars stored on DiskStation. For more information, click the Help button (with a question mark) at the top-right corner.

Synology DiskStation User's Guide

Based on DSM 4.1

72 Chapter 8: Access Files from Anywhere

Sync Files via Cloud Station Cloud Station is a file sharing service that allows your DiskStation to become a file sync center to sync files between multiple client computers.

Note: A client application (Cloud Station for computer clients, available at Synology's Download Center) is required to be installed on client computers before syncing files with DiskStation.

To install and run Cloud Station on your DiskStation: Go to Main Menu > Package Center to install and run the Cloud Station package.

To launch Cloud Station: Go to Main Menu > Cloud Station.

For more information about Cloud Station, run and launch the package, and then click its Help button (with a question mark) at the top-right corner.

Synology DiskStation User's Guide

Based on DSM 4.1

73 Chapter 8: Access Files from Anywhere

Access Files via File Station File Station is DSM's file management tool, allowing DSM users over the Internet to access DiskStation folders with their web browsers. By launching two or more File Stations, you can manage all your DiskStation data by dragging and dropping them between different File Stations.

File Station Requirement To use the full featured File Station, you will need the newest web browser, Java and Flash Player.

Java (For browsing folders on the local computer): Java Runtime Environment (JRE) 5 or later Flash: Flash Player 9.0.28 or later

File Station Appearance Go to Main Menu > File Station to open a File Station window.

Left panel: Displays Synology DiskStation's shared folders and their subfolders in the upper part, and the folders on your local computer in the lower part.

Main section: Displays contents of the currently-selected folder. Help button (top-right corner): Click the Help button (with a question mark) to reveal the DSM Help, where

you can get useful help about how to use File Station. Search field (next to the Help button): Enter a keyword to filter through files or folders in the current folder. Advanced Search (downward arrow below the Help button): Search for refined search results.

Manage File Station Options Click Options to manage the following File Station options.

General Here you can enable File Station log to record the activities of all users. The user activities include Create folder, Upload, Download, Delete, Rename, Move, Copy and Property set.

To enable File Station log: 1 If you want to record the activities of all users, tick Enable File Station log.

2 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

74 Chapter 8: Access Files from Anywhere

To see the File Station log: 1 Click View Logs, which will lead you to Main Menu > System Logs.

2 Choose File Transfer tab to see the logs.

Mount By default, all users can mount remote folders or virtual drives. Here you can limit the access to remote folder or virtual drive management to administrators only.

Note: Non-administrator users can only mount remote folders within their home folder.

To determine who can mount remote folders or virtual drives: 1 Choose All users or Administrators in the Remote Folder or Virtual Drive section.

2 Click OK.

Note: For more information about remote folders or virtual drives, see "Mount Remote Folders or Virtual Drives" on Page 80.

Shared Links By default, all users can share file links. Here you can limit the access to shared links management to administrators only.

To determine who can share file links: 1 Choose All users or Administrators.

2 Click OK.

Note: For more information about shared links, see "Share File Links" on Page 80.

Speed Limit You can enable speed limit to control the transfer between files.

To enable speed limit: 1 Tick Enable speed limit. 2 Click Speed Limit Settings to enable speed limit for users or groups individually.

3 Click OK.

Note: The speed limit for a group is the limit of the total bandwidth used by all group members. When setting speed limit for a user, you will see numbers under Result if there is already a group speed limit

applied to the user. The speed limit assigned to a user will not be included in the speed limit of the group that the user belongs to.

Synology DiskStation User's Guide

Based on DSM 4.1

75 Chapter 8: Access Files from Anywhere

Search for Files or Folders You can filter through files or folders in the current folder. You can also perform advanced search for more refined search results.

To search for files or folders in the current folder: 1 Use File Station to go to the folder containing contents you want to search.

2 In the Filter field at the top-right corner of the File Station window, enter a keyword and see the filtered result in the main area of the window.

To perform advanced search: 1 Use File Station to go to the folder containing contents you want to search.

2 At the top-right corner of the File Station window, click the button to the right of Advanced Search to reveal the Advanced Search panel.

3 Enter information or choose from drop-down menus in the following search criteria:

Keyword: Enter a keyword to search for files or folders with matching names.

Note:

You can use global pattern [*] (meaning any number of random characters) or [?] (meaning 1 random character) in the keyword. For example, [a*n] can represent [action], [attention], or [an].

You can use space pattern [ ] to separate more than one keywords. For example, [a tion] can represent [action], [a function], [function added], or nation.

You can add double quote ["] at the beginning and the end of the keyword to search for exact matches. For example, ["a typ"] can represent [a type], but cannot represent [typical].

Location: The default location is the current folder. If you want to search other locations, select any of the listed shared folders to search its contents, or select Other locations to select any other locations.

File Type: Choose Extension to limit the search range to specific types of files, or choose Folder to search for folders only.

Size (MB): Choose from equals, is greater than, and is less than, and then enter a size to search for files with matching sizes.

Modified Date or Created Date: Choose from is exactly, is before, and is after, and then choose a date from the calendar to search for files with matching created or modified dates.

Owner/Group: Choose Owner or Group, and then choose from the drop-down menu to search for files or folders belonging to the selected owner or group.

Note: Other than Location, you have to specify at least one search criterion.

4 Click Search to start the search, or click Reset and specify the search criteria again. When the search is complete, matching files will be listed in the main area of File Station.

Note: For quicker search result, it is recommended that you index shared folder contents. See "Index Shared Folder Contents" on Page 65 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

76 Chapter 8: Access Files from Anywhere

Set File Station in Action With the Action menu, right-clicking, and dragging-and-dropping, you can easily download, copy, move, rename, delete, extract, and compress files or folders, and more.

Download Files or Folders from Synology DiskStation Follow the steps below to download files or folders from DiskStation to your computer.

To download files to your local computer: 1 Select the files or folders you want to download. (Press and hold Shift or Ctrl while making multiple selections.)

2 Choose Download from the Action menu, and then choose any of the following:

Download: Choose this option to download the files using your web browser's download functionality. Add to queue - Overwrite or Add to queue - Skip: Depending on whether you want to overwrite files or

folders with the same name at the destination, choose either of the options to add the files to the download queue (which will appear by clicking the downward arrow at the top-right corner).

Note:

Under Windows environment, characters \ * ? " > | # % contained in the filename will be replaced by - after downloading.

If you make multiple selections, File Station will archive your selections into a zip file before downloading.

Upload Files or Folders to Synology DiskStation Use any of the following methods to upload files or folders from your computer to Synology DiskStation.

Method 1: 1 From the upper part of the left panel, choose a destination folder on Synology DiskStation.

2 Choose Upload, and select files or folders from your local computer.

3 Click OK to start uploading.

Method 2: 1 From the lower part of the left panel, select a folder on your local computer. The main section now displays the

contents of the selected folder.

2 Select the files or folders you want in the main section, and then click Upload.

3 Select a destination folder on DiskStation in the window that appears.

4 At the top-right corner of the window, select Overwrite if you want to overwrite files or folders with the same name in the destination folder. Otherwise, select Skip.

5 Click OK to start uploading.

Method 3: 1 On the left panel, drag a folder from your computer (the lower part) to any folder on the DiskStation (the upper

part).

2 In the pop-up menu that appears, choose Upload - Overwrite to overwrite files or folders with the same name in the destination folder. Otherwise, choose Upload - Skip to skip the files with the same filename.

Method 4: 1 From the upper part of the left panel, select a destination folder on DiskStation.

2 Select the files on your computer's desktop or file explorer (for example, Windows Explorer or Mac Finder), and then drag and drop them into File Station.

3 In the dialog that appears, tick the checkbox if you want to overwrite file(s) with the same name in the destination folder, and then click Upload.

Synology DiskStation User's Guide

Based on DSM 4.1

77 Chapter 8: Access Files from Anywhere

Note:

If you are using Google Chrome, Firefox, Mac Safari 5.1 or later, or have installed JRE 5 or later, you can upload files with size over 4GB. Otherwise, you can only upload up to 2GB of contents at a time.

Uploading using drag-n-drop is supported on specific browsers only: Chrome, Firefox, Mac Safari 5.1 or onwards. If you are using Chrome for Linux, and then log in to DSM via the HTTPS protocol, you need to import a trusted

certificate (under the HTTP Service tab at Main Menu > Control Panel > DSM Settings) to be able to upload using drag-n-drop.

When you upload files and folders using any of the above methods, you can see the uploading progress of the files and folders in the top-right corner of the desktop. You can also click the upward arrow at the right end of the taskbar to see the Upload Queue.

Copy or Move Files or Folders on Synology DiskStation Use any of the following methods to copy files or folders between folders on Synology DiskStation.

Method 1: 1 Select the files or folders you want to move or copy. (Press and hold Shift or Ctrl while making multiple

selections.)

2 Choose Cut or Copy from the Action menu.

3 Go to the destination folder on DiskStation or your computer.

4 Choose Paste - Overwrite or Paste - Skip from the Action drop-down menu, depending on whether you want to overwrite files or folders with the same name in the destination folder.

Method 2: 1 Select the files or folders you want. (Press and hold Shift or Ctrl while making multiple selections.)

2 Drag any folders or files from the main section to another DiskStation folder on the left panel.

3 In the pop-up menu that appears, choose Copy - Overwrite, Copy - Skip, Move - Overwrite, or Move - Skip to overwrite or skip files or folders with the same name in the destination folder.

Note:

When copying or moving files/folders to a directory in FAT file system, characters \ *?">| in the filename will be replaced by , and the Metadata of Mac files will be deleted.

If you cut files from your local computer, and then paste it in a DiskStation folder, the files will still be retained on your local computer.

Rename a File or Folder on Synology DiskStation 1 Select a file or a folder.

2 Do one of the following:

Choose Rename from the Action menu. Right-click the file or folder and choose Rename.

3 Enter a new name in the window that appears and click OK.

Create a Folder 1 Go to the directory where you want to create a folder.

2 Do any of the following:

Click Create folder. Choose Create folder from the Action menu.

3 Enter a new name in the window that appears and click OK.

Delete Files or Folders 1 Select the files or folders you want. (Press and hold Shift or Ctrl while making multiple selections.)

2 Do one of the following:

Choose Delete from the Action menu.

Synology DiskStation User's Guide

Based on DSM 4.1

78 Chapter 8: Access Files from Anywhere

Right-click one of the files or folders and choose Delete.

Extract an Archive 1 Select an archive you want to extract.

2 Choose Extract from the Action menu. You can see the contents of the archive in the File list. 3 Click the Option tab to enter the password if the archive is password-protected.

4 Click Destination at the bottom, and select a destination folder on Synology DiskStation in the window that appears.

5 Do one of the following:

To extract all files and folders in the archive, click Extract All. To extract some files or folders in the archive, select them in the File list and click Extract Selected.

Note: File Station can extract the following archive formats: .zip, .tar, .gz, .tgz, .rar, .7z, .iso (ISO 9660 + joliet)

Compress Files or Folders 1 In the main section, select the files or folders on Synology DiskStation that you want to compress. (Press and

hold Shift or Ctrl while making multiple selections.)

2 Do one of the following:

Choose Compress to (file name).zip from the Action menu. Right-click one of the selections and choose Compress to (file name).zip. To use advanced options (such as renaming or encrypting the archive, using different compression levels or

modes), choose Add to archive instead.

Note:

You cannot compress files or folders on your local computer using File Station. Supported archive formats: .zip, .7z.

Open a File in a New Window Open a file on Synology DiskStation in a new tab or window of the web browser to preview it instantly.

To open a file in a new window: 1 Select the file you want to preview.

2 Do one of the following:

Choose Open in New Window from the Action menu. Right-click the file and choose Open in New Window.

If your browser can view the selected file, it will be opened in a new browser window.

Note: The browser setting will decide what file types can be viewed directly.

Create My Favorites or Desktop Shortcuts With File Station, you can add frequently-used DiskStation folders to My Favorites at the top of the left panel for quicker access, or create desktop shortcuts for DiskStation files or folders. For more information, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Read and Move Files > Create My Favorites or Desktop Shortcuts.

Synology DiskStation User's Guide

Based on DSM 4.1

79 Chapter 8: Access Files from Anywhere

Edit the Properties of Files and Subfolders You can edit the access privileges to files and subfolders (meaning folders and their subfolders in a shared folder), copy download links and open file in a new browser window in the Properties window.

View or Change File or Folder Permissions With File Station, you can set access privileges to files and subfolders. This function is especially useful when you want to allow different groups of users to access different subfolders in a shared folder.

Note: To set access privileges to shared folders, use Synology DiskStation Manager instead. See "Allow Users or Groups to Access Shared Folders" on Page 62 for more information.

To allow users and groups to access files and subfolders: 1 Select the files and folders for which you want to set access privileges. (Press and hold Shift or Ctrl while

making multiple selections.)

2 Right-click one of the files or folders, or choose the Action menu, and then choose Properties.

3 In the Owner & Group section, do the following:

Choose the owner of the selected files and folders from the Owner drop-down menu. Choose the user group of the selected files and folders from the Group drop-down menu. All the other users or groups not chosen here belong to the Others group.

4 Click the Permission tab, and then tick the Read, Write and Execute checkboxes to allow or disallow Owner, Group, and Others to access the selected files and folders.

Note: When you set access privileges for multiple files, gray checkboxes (if any) mean the privileges they represent (such as owner's Read privilege) are inconsistent among the files, and the original privileges for each file will be preserved. You can tick those gray checkboxes (until they turn white) to make the access privileges consistent among all files.

5 If you want the settings to be applied to all of the subfolders, tick the Apply to this folder, sub-folders and files checkbox.

6 Click OK.

Note: You are not allowed to edit the access privileges to files and subfolders in the photo shared folder here. To set access privileges to photo albums for Photo Station users, see "Set Album's Privacy Settings" on Page 105 for more information.

Obtain a File or Folders Download Link You can obtain the download link to a file or folder and share the link with other users.

To obtain a file or folder's download link: 1 Select the file or folder for which you want to obtain its download link.

2 Do one of the following to open the Properties window:

Choose Properties from the Action menu. Right-click the file or folder and choose Properties.

3 Right-click the download link, and choose the pertinent function from the shortcut menu to copy the download link. The name of the function may vary depending on the web browser you are using.

4 Send the link to other users via Email or instant messages. They can download the linked file or folder by entering their username and password.

Note:

To download a file or folder with the download link, valid DiskStation username and password are required. With File Station, you can only perform the upload action for files and folders on your computer. All the other File

Station actions and properties setting are available for files and folders on Synology DiskStation only.

Synology DiskStation User's Guide

Based on DSM 4.1

80 Chapter 8: Access Files from Anywhere

Share File Links With File Station, you can generate URLs for DiskStation files, which could be used by people without DSM user credentials to download the shared files. For more information, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Share File Links.

Mount Remote Folders or Virtual Drives File Station allows you to mount remote folders to access contents shared by network computers or other DiskStations, or virtual drives to access contents within disc images. That way, you can easily navigate all available network resources or disc images with File Station. For more information about remote folders or virtual drives, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Mount Remote Folders or Mount Virtual Drives.

Edit Music Information With File Stations Music Information Editor, you can view or edit the information of music files.

To view or edit music information: 1 Right-click the music file and choose Edit music information.

2 Here you can view or modify the music file's information, or choose a language from the Codepage drop-down menu to convert non-Unicode text to Unicode and display the text in the correct language. (System default is the codepage you specified at Main Menu > Control Panel > Regional Options.)

3 Click Save to finish the setup.

Note: Music Information Editor supports the following formats: mp3, ogg.

View Documents, Photos, or Videos With File Station, you can view documents, videos or photos. For more information, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Read and Move Files > View Documents, Photos, or Videos.

Edit Photos With File Station, you can edit photos with web-based editors, such as Pixlr Editor or Pixlr Express. For more information, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Read and Move Files > Edit Photos.

81

Chapter

9 Chapter 9: Back Up Data

Synology offers comprehensive backup solutions for your computer and Synology DiskStation. You can back up data on your computer to Synology DiskStation. If you are admin or a user belonging to the administrators group, you can also back up DiskStation data with local or network backup, or sync shared folder contents between DiskStations. The creative Copy button simplifies external storage devices backup with One-touch design. The support for the Amazon S3 backup service and the innovative Time Backup package give you other choices for server backup.

Back Up Computer Data Synology-designed Data Replicator 3 allows you to back up data from a Windows computer to Synology DiskStation. If you are using a Mac or Linux, Synology DiskStation can also serve as their backup destination.

Use Data Replicator for Windows The Synology Data Replicator installation package can be found on the Installation disc and Synology's Download Center at: http://www.synology.com/support/download.php

What Can Data Replicator Do? Monitor specific folders on your Windows computer and perform real-time backup when any modification to the

contents within a monitored folder is made. Adjust backup versions and restore points. Restore backup data from Synology DiskStation to your Windows computer according to your preference.

Synology DiskStation User's Guide

Based on DSM 4.1

82 Chapter 9: Back Up Data

Important:

Your computer and Synology DiskStation should use the same encoding. See "Language" on Page 23 for more information.

Synology Data Replicator 3 is the next generation of Synology Data Replicator. It can only restore the data on Synology DiskStation that was backed up after Data Replicator 3 was installed. If users have backed up data on Synology DiskStation using Synology Data Replicator, we recommend restoring data on Synology DiskStation to PC first before using Synology Data Replicator 3.

Data Replicator Requirement: Free HDD Space: 5MB Operating System: Windows 2000 or later Best Screen Resolution: 1024 x 768 or above Network Environment: Microsoft Networking over TCP/IP enabled and has network connection with

Synology DiskStation

To install Data Replicator: 1 Insert the Installation disc into the optical drive of your computer.

2 Click Data Replicator 3, and follow the onscreen instructions to finish installation.

To use Data Replicator: For detailed instructions on how to use Data Replicator, see its Help by clicking the Help button.

Use Time Machine for Mac Synology DiskStation provides compatibility for backup with Apple Time Machine. Mac users can back up their data to Synology DiskStation's shared folder without problem.

To set Synology DiskStation as Time Machine's backup destination: 1 Go to Main Menu > Control Panel > Win/Mac/NFS and tick Enable Mac file service. 2 Choose a shared folder from the Time Machine drop-down menu. The chosen shared folder will become Time

Machine's backup destination.

Note: For more information about using Time Machine, see the help on your Mac computer.

Use rsync for Linux You can use rsync to back up Linux data to Synology DiskStation.

Back up Data or iSCSI LUN on Synology DiskStation Other than backing up computer data to Synology DiskStation, you as admin or a user belonging to the administrators group can back up the data or iSCSI LUN on your DiskStation.

Synology DiskStation User's Guide

Based on DSM 4.1

83 Chapter 9: Back Up Data

Ways to Back Up Synology DiskStation Data Local Backup and Network Backup are ways you can choose to back up data or iSCSI LUN on your Synology DiskStation. Plus, Synology DiskStation also supports Amazon S3 Backup, allowing you to back up data to the Amazon S3 Server.

Local Backup Local Backup allows you to back up data to the LocalBackup folder in the following locations on your Synology DiskStation:

Another shared folder An external USB or eSATA Disk attached to your Synology DiskStation

Note: You may need to format the external disk before performing Local Backup to the disk for the first time.

Network Backup Network Backup allows you to back up data to the NetBackup folder in the following locations within the Intranet or over the Internet: Another Synology DiskStation A rsync-compatible server

Note: For more information about enabling Network Backup Service to set up your DiskStation as a backup destination, go to Main Menu > Control Panel > Network Backup, and click the Help button (with a question mark) at the top-right corner.

Amazon S3 Backup Amazon Simple Storage Service (S3) Backup allows you to back up data to the Amazon S3 server.

After you perform an Amazon S3 Backup task, a single backup file will be stored in a Bucket on Amazon S3 Server, which is identified by a unique Set KEY Value that begins with SourceServerName_MAC address, and ends with the complete file path of this file.

With Amazon S3 Backup, backing up to Amazon S3 RRS (Reduced Redundancy Storage) is also supported.

Note:

There are also encrypted and non-encrypted modes for Amazon S3 Backup. Fees may apply to use the Amazon S3 Backup service. For more information about backing up DiskStation data, go to Main Menu > Backup and Restore and click the

Help button (with a question mark) at the top-right corner.

Perform Backup Tasks on Synology DiskStation Go to Main Menu > Backup and Restore to perform backup tasks on Synology DiskStation.

Before you start, do the following first: For Network Backup to another Synology DiskStation: Log in to the DSM of the target

Synology DiskStation, and then go to Main Menu > Control Panel > Network Backup > Network Backup. Make sure Enable network backup service is ticked and Use customized rsync configuration is deselected to make the target DiskStation available for backup.

For Local Backup to external disks: Go to Main Menu > Control Panel > External Devices and click Format to format the external disk.

To perform data or LUN backup or restoration: For detailed instructions, click the Help button at the top-right corner, and then go to Backup and Restore > Backup.

Synology DiskStation User's Guide

Based on DSM 4.1

84 Chapter 9: Back Up Data

Back up and Restore System Configurations Go to Main Menu > Backup and Restore > Configuration Backup to back up and restore the system configurations of your Synology DiskStation.

To back up system configuration: Choose Back up configuration. DiskStation will export a configuration file (with the name [DiskStation Name]_[Created Date].dss) to your local computer.

To restore system configuration: 1 Click Restore configuration, click Choose File to select the configuration file, and then click OK.

2 Tick the checkboxes to choose the configurations you want to restore, and then click OK.

More Information

The configurations that will be backed up include the following: Users, Groups, and Shared Folders Workgroup, Domain, and LDAP File Sharing Services (such as Windows File Service, Mac File Service, NFS Service, FTP, and WebDAV), Web Services Network Backup Services (such as Network Backup (or Rsync) Service, Shared Folder Sync Service, and

Time Backup Service) Other Services (such as User Home and Password Strength)

Synology DiskStation User's Guide

Based on DSM 4.1

85 Chapter 9: Back Up Data

Sync Shared Folder Contents between DiskStations Shared Folder Sync allows you to sync shared folder contents from a source DiskStation (or "client") to a destination DiskStation (or "server") over the network.

Enable Shared Folder Sync Service Before performing Shared Folder Sync, you will need to enable the Shared Folder Sync service on the server (destination DiskStation).

To enable Shared Folder Sync service on the server: 1 On the server (destination DiskStation), log in to DSM with the credentials of admin or a user belonging to the

administrators group.

2 Go to Main Menu > Control Panel > Network Backup. Make sure Enable network backup service is ticked and Use customized rsync configuration is deselected to make the target DiskStation available for syncing.

3 Under the Shared Folder Sync tab, tick Enable Shared Folder Sync service.

4 Click Apply.

Link or Unlink the Server and the Client Follow the instructions below to pair or unpair the server and the client. Shared Folder Sync provides Multiple- Source Shared Folder Sync feature, which allows multiple clients to sync their shared folders to one DiskStation.

To link the server with a client: On a client (source DiskStation), perform Shared Folder Sync and choose the server as sync destination. After the linking process is complete, you can see the linking status in the Info section.

Note: See "Manage Sync Tasks" for more information about how to perform Shared Folder Sync to a server.

To unlink a server from a client: 1 On the server (destination DiskStation), log in to DSM with the credentials of admin or a user belonging to the

administrators group.

2 Go to Main Menu > Control Panel > Network Backup > Shared Folder Sync.

3 Click Connection List, select a connection, and click Unlink.

Manage Sync Tasks After Shared Folder Sync service is enabled on the server (destination DiskStation), you can log in to a client (source DiskStation) to perform Shared Folder Sync with the server.

To create a sync task: 1 On the client (source DiskStation), log in to DSM with the credentials of admin or a user belonging to the

administrators group.

Synology DiskStation User's Guide

Based on DSM 4.1

86 Chapter 9: Back Up Data

2 Go to Main Menu > Backup and Restore, and then click the Shared Folder Sync tab.

3 Click Create.

4 Enter a name for the task.

5 Select the shared folder you want to sync to the destination.

6 Set up the destination and the following transfer options of this sync task:

Enable transfer encryption: Encrypt data during transfer. Encrypted transfer provides better security, while non-encrypted transfer provides better performance.

Enable transfer compression: Compress data during transfer. It will save network bandwidth but increase CPU loading.

Enable block-level synchronization: Transfer only differential data instead of whole files. It will save network bandwidth but increase CPU loading. Set up the destination and transfer options of this sync task.

7 Set up schedule for the task. There are 3 schedule modes:

Run sync every [number] hours or Run sync every [number] minutes: Run sync task by specific interval of hours. The time starts counting from midnight. And the interval cannot exceed 24 hours.

Run sync automatically every day at (hh:mm): Run sync task daily at specific time. Run sync manually: Only run sync when manually performed. Run sync on modification: Run sync task immediately once any change occurs at the source shared

folder. 8 Click Apply. Now you can see the sync task on the task list, which will be performed according to the specified

schedule.

To manage a sync task:

1 Select the task on the task list.

2 Do any of the following:

Click Edit to edit the task. Click Delete to delete the task. If the sync task is not in progress, click Sync Now to perform the task right away. If the sync task is in progress, click Cancel to stop the ongoing task.

Note: If the schedule for a sync task is set as Run sync on modification, clicking Cancel would stop the ongoing sync task. However, if any changes are made to the contents of any shared folder(s) monitored by the sync task, Shared Folder Sync would resume the task again.

Click Full Sync to sync all data. Shared Folder Sync will run a full sync for the first time, and only sync the modified parts after the first sync. Clicking this button can help you manually sync all data again.

Synology DiskStation User's Guide

Based on DSM 4.1

87 Chapter 9: Back Up Data

Note:

All files that have been removed from the client will also be removed from the server. The access privilege to folders synced to the server will be set as default, which means not specified. During the syncing process, the client will copy the selected shared folders to the server. However, if a folder with

the same name already exists on the server, that folder will be renamed as "shared_folder_name 1" to prevent its data from being overwritten.

Task name must be of 1 to 32 Unicode characters and must not contain the following characters: ! " # $ % & ' ( ) * + , / : ; <= > ? @ [ ] \ ^ ` { } | ~

If you sync shared folders from ext4 to ext3 file system, you may encounter errors when a folder has over 32,000 files in a single directory.

If the shared folders on the server have been synced with another client, Shared Folder Sync will perform a full sync for the task.

When transfer encryption is enabled, you have to set up the password. It cannot be left empty. When syncing to DiskStation over Internet, you can enter the server name by its external IP address or its

hostname. However, if you choose to enter its hostname, the name must be in FQDN (Fully Qualified Domain Name) format, like "abc.bcd.com", for example.

To set up port-forwarding rules for Shared Folder Sync over the Internet, please choose port 22 for encrypted transfer and port 873 for unencrypted transfer.

An encrypted shared folder will remain encrypted after syncing. You need the encryption key to mount the shared folders on the destination DiskStation.

Backup DiskStation Data with Time Backup Synology Time Backup is a quick and flexible way to back up and restore shared folders on DiskStation. You can back up the data locally onto another volume, or onto an external hard disk. You can set up multiple tasks and create more than one version for each task.

Time Backup features snapshot function. When creating a version, the system will take a snapshot and capture the condition of the data within the specified moment. The system will create a version entry within seconds. You can access the newly created version and edit the files you've just backed up with no time delay.

To set a DiskStation as the backup destination for Time Backup: 1 Go to Main Menu > Control Panel > Network Backup. Make sure Enable network backup service is ticked

and Use customized rsync configuration is deselected to make the target DiskStation available for backup.

Synology DiskStation User's Guide

Based on DSM 4.1

88 Chapter 9: Back Up Data

2 Go to Main Menu > Control Panel > Network Backup > Time Backup, tick Enable Time Backup service, and then click Apply.

To install and run Time Backup on your DiskStation: Go to Main Menu > Package Center to install and run the Time Backup package.

To launch Time Backup: Go to Main Menu > Time Backup.

For more information about Time Backup, run and launch the package, and then click its Help button (with a question mark) at the top-right corner.

Note: For more information about installing packages for Synology DiskStation Manager, see "Chapter 11: Discover Various Applications with Package Center" on Page 97.

Back up Data on USB Device or SD Card You can go to Main Menu > Control Panel > External Devices to specify a shared folder for used with USBCopy or SDCopy, and then use the Copy button on the front panel of your DiskStation to copy data from a USB device or SD card to the shared folder.1

To configure USBCopy or SDCopy: 1 Go to Main Menu > Control Panel > External Devices > USBCopy or SDCopy and specify a shared folder

from the drop-down menu.

2 Click Apply.

All data on your USB device or SD card will be copied to the specified shared folder when you perform USBCopy or SDCopy.

To perform USBCopy or SDCopy: 1 Connect the USB device or SD card to the USB port or the SD card slot of your Synology DiskStation.

2 Press the Copy button (with the letter C) on the front panel of your Synology DiskStation.

Note:

Only USB devices or SD cards in FAT or NTFS format are supported. For USBCopy, the USB device must be plugged into the USB port on the front panel of Synology DiskStation. The available space of the destination shared folder must be larger than the used space of the USB device or SD

card.

--------- 1 USBCopy and SDCopy are supported on specific models only. Visit www.synology.com for more information.

89

Chapter

10 Chapter 10: Host Websites, Email Server, and Print Server

Synology DiskStation is especially designed for small and medium businesses (SMB), providing them with the ability to set up web, email, and print servers on a single Synology DiskStation without spending extra money.

Use Web Station to Host Websites Go to Main Menu > Control Panel > Web Services to set up your website with Web Station, which is integrated with support for PHP and MySQL.

Enable Web Station When Web Station is enabled, the web shared folder will be created automatically. Save your web page content in the folder to publish it on your website.

To enable Web Station: 1 Tick Enable Web Station.

2 Click Apply.

Web Station support and limitations include: The homepage for your website must be named index.htm, index.html, or index.php. PHP 5.3.15 is supported. The following functions are not supported by PHP: system(), exec(). When you use the PHP mail() function, the system will automatically retrieve and use the SMTP server

information from Synology DiskStation. Make sure you have entered the correct SMTP server information.

Synology DiskStation User's Guide

Based on DSM 4.1

90 Chapter 10: Host Websites, Email Server, and Print Server

Note: For more information about SMTP server, see "Manage E-mail Notification" on Page 168.

The real path of the web shared folder is /volume1/web. Some applications require the user to set the path in the configuration file.

The names blog, photo, photosrc, and webdefault are reserved folder names. These names cannot be used by Web Station, so please do not create folders with these names under the web shared folder.

You can customize the error page by creating any of the following files and putting them in the web shared folder: missing.html, missing.htm, or missing.php. When users try to connect to a page that does not exist, this customized error page will be displayed.

Enable Virtual Host to Host Websites The Virtual Host support allows you to host up to 30 websites on one Synology DiskStation. Each website can have different port number or even different hostname.

To enable Virtual Host and host websites: 1 Click Virtual Host to open the settings window.

2 Click Create and enter the following information.

a The name for the subfolder (in the web shared folder) that will contain the web pages to build the website

b The hostname for the website

c The protocol (HTTP or HTTPS) for the website

d The port number for the website

Note: To use HTTPS protocol, HTTPS connection needs to be enabled in advance. See "HTTP Service" on Page 17 for more information.

3 Click OK. 4 Click Virtual Host and go through the above steps again if you want to set up more websites.

Enable Personal Website The personal website function is a convenient way to allow Synology DiskStation users to host their own personal websites. Each local user, domain user and LDAP user will have a unique website address. For more information about website addresses, please click Help button (with a question mark) at the top-right corner.

Note: Before enabling personal website, make sure User Home is enabled. See "Create User's Home Folder" on Page 58 for more information.

To create a personal website: 1 Tick Enable personal website and click Apply.

2 Create a www folder in the user's home folder.

3 Upload web pages to the www folder.

Personal website Support and limitations: Local users are only allowed to access the data in the following path: Their own home folder /var/tmp /tmp /volumeX/@tmp

Synology DiskStation users can customize the error page by creating any of the following files and putting them in the www shared folder: missing.html, missing.htm, or missing.php. When users try to connect to a page that does not exist, this customized error page will be displayed.

Synology DiskStation User's Guide

Based on DSM 4.1

91 Chapter 10: Host Websites, Email Server, and Print Server

Enable MySQL You can enable MySQL to use the MySQL database function for your website. After MySQL is enabled, you can install the phpMyAdmin package available at Synology's Download Center to manage the MySQL database.

To Enable MySQL: Tick Enable MySQL and choose a volume to store the database data.

Note:

For more information about installing packages for Synology DiskStation Manager, see "Chapter 11: Discover Various Applications with Package Center" on Page 97.

By default, the ID for the phpMyAdmin administrator is root, and the password is blank. It is recommended that you change the password.

You can go to Main Menu > Control Panel > Restore Defaults to delete your MySQL databases. See "Restore Synology DiskStation to Factory Defaults" on Page 172 for more information.

Manage PHP Settings After you have enabled Web Station, you can click the PHP Settings tab to configure PHP related settings.

To turn on PHP configuration option register_globals: 1 Tick Turn on PHP configuration option register_globals if the PHP application you use requires the

register_globals option to be turned on.

2 Click Apply.

Important: it is recommended that you turn off the register_globals option for security reasons.

To enable PHP cache: 1 Tick Enable PHP cache if you wish to enhance the PHP performance. However it may not take effect under

some circumstances.

2 Click Apply.

To customize PHP open_basedir: 1 Tick Customize PHP open_basedir if you wish to customize your own open_basedir.

2 Type the customized path in the text field. Use : to separate between each path. For example: /etc:/tmp:/usr/bin/php

3 Click Apply.

4 If you want to use the system default setting, uncheck the Customize PHP open_basedir and click OK.

To select PHP extension: 1 Click Select PHP extension to customize your own PHP extension.

2 In the pop-up dialog PHP extension List, select which extension you want to enable.

3 You can also click Default at top of the dialog to return to default settings.

4 Click Apply.

More Information

Install Featured Applications After you have finished setting up your web environment, you can install applications to enhance the features

of your website using many of the free Open Source applications. For a list of featured applications tested to be compatible with Synology DiskStation, visit

http://www.synology.com/support/faq_show.php?q_id=404. For the download links and installation instructions of those applications, visit their official websites.

Synology DiskStation User's Guide

Based on DSM 4.1

92 Chapter 10: Host Websites, Email Server, and Print Server

Modify HTTP Service Options Click the HTTP Service tab at Control Panel > Web Services. In addition to the default port number 80, you can add another port for the use of Photo Station and Web Station.

To add an additional HTTP port: 1 Tick Add additional HTTP port. 2 Enter any port number between 1 and 65535 in the HTTP field.

3 Click Apply.

Important: You cannot use the following port numbers for HTTP access, because they are reserved for system use.

20, 21, 22, 23, 25, 110, 137, 138, 139, 143, 199, 443, 445, 515, 543, 548, 587, 873, 993, 995, 3306, 3689, 5000, 5001, 5005, 5006, 5335, 5432, 6881, 8080, 7000, 7001, 8081, 9997, 9998, 9999, 50001, 50002, eMule default ports: 4662 (TCP), 4672(UDP), and FTP default port range: the actual range may vary depending on different models.

To enable HTTPS connection for Web Station and Photo Station: 1 Tick Enable web HTTPS connection for web services.

2 Click the optional Import Certificate.

3 Click Apply.

By enabling this function, HTTP connections to Web Station and Photo Station will be protected with SSL/TLS encrypting mechanism.

Note:

For more information about importing certificate and enabling HTTPS connection for other services, see "HTTP Service" on Page 17.

For more information about Photo Station, see "Chapter 12: Share Photos, Videos, and Blogs with Photo Station" on Page 100.

Host Mail Server You can turn your Synology DiskStation into a mail server, allowing Synology DiskStation users to receive and deliver mail messages using their mail client programs.

Synology DiskStation User's Guide

Based on DSM 4.1

93 Chapter 10: Host Websites, Email Server, and Print Server

Before you start Register a domain name for your IP, or apply for a DDNS hostname.

Note: For more information about registering a DDNS account for Synology DiskStation, see "Register a DDNS hostname for Synology DiskStation" on Page 43.

When applying for a domain name or dynamic domain name, please fill the MX (Mail eXchanger) record of mail domain with your mail server (that is the FQDN of Synology DiskStation). For example, if the mail server is mail.synology.com, then fill the MX record with mail.synology.com.

Go to Main Menu > Control Panel > User and enable User Home service to allow users to store their mail messages in their home folders. Otherwise, they will not be able to send or receive mails.

Note: For more information about User Home, see "Create User's Home Folder" on Page 58.

Confirm the port forwarding settings: You should follow the table below to setup port forwarding if NAT is required.

Protocols SMTP POP3 IMAP IMAPS POP3S

Port 25 110 143 993 995

Note IMAPS: IMAP over SSL/TLS POP3S: POP3 over SSL/TLS

Set up Mail Server Go to Main Menu > Package Center to install and run the Mail Server package.

To view overall status: Click the Overview tab to see the information of services status, the amount of mails in mail queue and mail activity statistics.

To set up SMTP: 1 Tick Enable SMTP to deliver and receive mails.

2 Tick SMTP Authorization is required if you want to prevent your mail accounts from being used as a spammer.

Note: If you use this option, your users must provide their Synology DiskStation user accounts and passwords for authentication while setting SMTP server in their mail clients. Take Outlook Express, for example, you can enable the option at My server requires authentication in Tools > Accounts > Mail Account > Properties > Servers.

3 Limit email size by specifying Maximum size per email. 4 If Enable SMTP-SSL is ticked, SSL secure connection will be supported when sending emails.

5 If Ignore authorization for LAN connections is ticked, all connections except for LAN connections will have to provide user account and password for authentication.

6 Set a domain name for Mail Server by filling in the Domain name field. To configure multiple domain names for Mail Server, click the Additional Domain button to open the setting window.

7 Tick Enable SMTP Relay to send mails via other SMTP Relay servers.

To create an alias: Click the Alias tab and click Create. You can create an alias to group many email addresses into one.

To enable IMAP/POP3: Click the IMAP/POP3 tab to enable IMAP/POP3. You must enable at least one of the protocols (POP3, POP3 SSL/TLS, IMAP and IMAP SSL/TLS) to receive mails via mail clients.

To enable spam filter: Click the Spam Filter tab and tick the options based on your needs to avoid receiving junk emails.

Synology DiskStation User's Guide

Based on DSM 4.1

94 Chapter 10: Host Websites, Email Server, and Print Server

To view mail logs: Click the Mail Log tab to view and export mail logs.

To enable Auto-Forwarding and Auto-Reply: Click the Personal Settings tab if you want to forward mails to other addresses or reply messages to the sender automatically.

Note: For more information about using Mail Server, click the Help button (with a question mark) at the top-right corner.

Install Mail Station to Enable Webmail Service With the Mail Station package up and running, DiskStation users can send and receive mails via DSMs webmail service.

To install and run Mail Station: Go to Main Menu > Package Center to install and run the Mail Station package.

Note: For more information about installing packages for Synology DiskStation Manager, see "Chapter 11: Discover Various Applications with Package Center" on Page 97.

To connect to Mail Station: Type the following web address in the address bar of your web browser, and then press Enter on your keyboard: http://Synology_Server_IP_Address/mail/

Note: For more information about using the webmail service, see Mail Station 2 User's Guide from Synology's Download Center at: http://www.synology.com/support/download.php

Set Synology DiskStation as Print Server Go to Main Menu > Control Panel > External Devices to set DiskStation as the print server over your local area network, allowing client computers or mobile devices to access printers connected to DiskStation. Furthermore, the AirPrint support allows you to print to the printer from an iOS device, and the Google Cloud Print support allows you to print to the printer when you are using Google products and services. (Refer to here for more information about Google Cloud Print.)1

Note: One DiskStation can be connected by up to 2 USB printers.

--------- 1 For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

95 Chapter 10: Host Websites, Email Server, and Print Server

Set up Print Server on DiskStation Under the External Devices tab, you can set up print server on DiskStation.

To set up print server on DiskStation: 1 Connect the network printer to the USB port of DiskStation, and select the printer's thumbnail appearing on the

device list.

2 Choose USB Printer Manager > Set Up Printer. 3 Do any of the following:

Choose Network MFP if you want clients over the local area network to use print/scan/fax functions of your multifunction printer.

Note: Scanning and faxing are available for Windows computers only.

Choose Network Printer if your printer only supports printing, or you want clients over the local area network to access the printing function only.

4 Click Save, and then click Close.

To enable AirPrint support: 1 Select the printer from the device list.

2 Choose USB Printer Manager > Set Up Printer. 3 Tick Enable AirPrint.

4 Choose your printer's brand and driver from the drop-down menus.

5 Click Save and then click Close.

6 If you want to print a test page to make sure AirPrint is successfully enabled, choose USB Printer Manager > Print Test Page.

Note:

Enabling AirPrint will also enable DSM's Bonjour Printer Broadcast function. AirPrint is available for iOS 4.2 or onward only.

To enable Google Cloud Print support: 1 Select the printer from the device list.

2 Choose USB Printer Manager > Set Up Printer.

3 Tick Enable Google Cloud Print.

4 Enter your Google email address and password in the fields.

5 Choose your printer's brand and driver from the drop-down menus.

6 Click Save.

7 If you want to manage your printer(s) and print job(s), click the Google Cloud Print link.

8 Click Close.

9 If you want to print a test page to make sure Google Cloud Print is successfully enabled, choose USB Printer Manager > Print Test Page.

To manage the printer: 1 Select the printer from the device list.

2 Do any of the following:

Click Get Info to get the printer's information. Choose USB Printer Manager > Release Printer to release the connection between the printer and a client

(Network MFP mode only). After a client connects to the multifunctional printer to receive faxes and scan files, the connection might last for a while and need to be released to allow the next client in line to connect to the printer.

Choose USB Printer Manager > Clean up spool space to cancel all printing jobs on all printers. Click Eject and disconnect the printer from the USB port of DiskStation.

Synology DiskStation User's Guide

Based on DSM 4.1

96 Chapter 10: Host Websites, Email Server, and Print Server

Set up Computer to Access Print Server After the print server is set up on your DiskStation, Windows, Mac, and Linux client over the local area network can connect to the print server and access its print/fax/scan service.

To set up print server access with Windows: 1 Install and open Synology Assistant on your computer.

2 Click the Printer Device tab, click the Add button, and follow the wizard to complete the setup process. If you cannot see the Printer Device tab, enable it by clicking the Settings button (with a gear icon) at the top-right corner.

Note:

Using Synology Assistant to set up print server access under the Network Printer mode is only available for DiskStations running on DSM v2.0.1-3.0368 and onward.

Using Synology Assistant to set up print server access under the Network MFP mode is only available for DiskStations running on DSM v3.1-1553 and onward.

For other methods of setting up print server access, open DSM Help, go to Main Menu > Control Panel > External Devices, click the Help button (with a question mark) at the top-right corner, and then refer to the Access Printer from Windows section.

To set up print server access with Mac OS X: 1 Make sure DSMs Bonjour Printer Broadcast function is enabled. See "Manage Mac File Service" on Page 52

for more information.

2 For ways of setting up printer server access with Mac OS X, go to Main Menu > Control Panel > External Devices, click the Help button (with a question mark) at the top-right corner, and then refer to the Access Printer from Mac section.

After the print server access is set up, clients over the local area network can access the printing/faxing/scanning service provided by the print server.

Access Print Server with iOS Devices If you have enabled DSM's AirPrint support by following the instructions of the "Set up Print Server on DiskStation" section, any iOS devices running on iOS 4.2 or later can print to the printer connected to your DiskStation.1

To access the print server with an iOS device:

1 Use your iOS device to browse to the document, web page, mail message, or photo you want to print.

2 Tap the actionbutton, and then tap Print. 3 Select the printer named [Printer_Name (DiskStation_Name)], and then tap Print.

--------- 1 For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit www.synology.com.

97

Chapter

11 Chapter 11: Discover Various Applications with Package Center

Synology has integrated third party or Synology-designed applications into packages that can be installed on DiskStation and managed with Package Center.

Coming with full-featured applications, Synology DiskStation provides you with a variety of privileges to enjoy multimedia contents, share photos, videos, and blogs, access files anytime and anywhere, monitor live actions from cameras, live stream and record digital TV programs, search and download files from the Internet, back up precious data, and build your own cloud.

This chapter introduces packages available at Package Center and explains how to manage packages, configure Package Center, and launch enabled applications.

What Package Center Offers Go to Main Menu > Package Center to find out what Package Center has to offer.

Manage Packages Here you can install/uninstall, run, update, and check the packages.

To install packages: 1 Do either of the following:

Under the Available tab, you can see a list of available packages. Click Install to install the packages you want. Installed packages will be moved to the Installed tab.

If you want to install a package by uploading the .spk file (available at Synology's Download Center or the third party websites), click Install / Update and follow the wizard to install the new package.

Synology DiskStation User's Guide

Based on DSM 4.1

98 Chapter 11: Discover Various Applications with Package Center

2 Depending on the number of volumes on your DiskStation, do either of the following:

If there is only one volume on your DiskStation, you will be asked if you want to run the package after installation. Click Yes to continue.

If there are multiple volumes on your DiskStation, you will be asked to choose from the drop-down menu to specify a destination volume to install the package. a Select your destination volume and click Next. b Tick Run after installation if you want to run the package once the installation is complete, and click

Apply to install the package. 3 When the installation is complete, the package will be moved to the Installed tab and the Main Menu will

automatically expand with the packages thumbnail on it.

To run or stop package services: Under the Installed tab, click Run or Stop to run or stop the services.

To update installed package, do either of the following: When package updates are available, you will see the Update buttons under the Installed tab. Click those

buttons to update the packages. If you want to update a package by uploading the .spk file (available at Synology's Download Center or the

third party websites), click Install / Update and follow the wizard to update the package.

Note: If you want to receive email or desktop notification when updates are available, click Settings > Notification, tick the checkboxes, and then click OK.

To uninstall an existing package: 1 Under the Installed tab, click the icon of the application which you want to remove.

2 In the window that appears, click Uninstall and then Yes to uninstall the package.

Configure Package Center You can manage the settings of Package Center by clicking the Settings button.

To select an update channel for packages: 1 Click the Channel Update tab, and choose either of the following options for installed packages:

Release channel: This version is more stable than Beta channel as it contains feature improvements. Issues existing and found in the Beta version are fixed. For better compatibility and reliability, it is recommended that you configure Package Center to update your packages to the release channel when a newer version of the package in question is available.

Beta channel: Considering overall performance, Beta version may not function as well as release channel does as groundbreaking features are just initially implemented for trial. In spite of this, if you are open to novel applications, Beta channel will definitely bring you non-stop surprises.

2 Click OK.

To enable notifications about package updates: 1 Click the Notification tab, and then tick Enable email notification and/or Enable desktop notification. The

first option allows DSM to send you emails when new updates are available, while the latter allows DSM to display a notification message at the top-right corner of your DSM desktop.

Note: For email notifications to take effect, configure your DSM's email notification settings first (at Main Menu > Control Panel > Notification).

2 Click OK.

To add a package resource: 1 Click the Package Sources tab, click Add, and then enter the name and location of your package sources.

2 Click OK. When the package source is added, you will see a new tab displayed in Package Center. Click the tab to install and run the packages from the package source.

Synology DiskStation User's Guide

Based on DSM 4.1

99 Chapter 11: Discover Various Applications with Package Center

Launch Enabled Applications After installing and running the packages, you can launch the enabled application in several ways.

To launch the installed and enabled application, do any of the following: Go to Main Menu > [Application name]. Open Main Menu and drag the application's thumbnail to DSM desktop, and then click [Application name] on

the desktop. Go to Main Menu > [Application name]. Right-click the application icon on the taskbar and then choose Pin

to Taskbar. When the application is closed, its icon will stay pinned to the taskbar, and you can click it to launch the application again.

100

Chapter

12 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Photo Station is an online photo album integrated with a blog for you to easily share photos, videos, and blog over the Internet. It features Timeline on which photos and videos can be presented with Google Maps displaying where they are taken. Face recognition allows you to have Photo Station find faces on photos for you. With this experimental feature, you can take memorable notes to mark your precious moments by tagging photos with people, places and descriptions. Moreover, you can also browse photos and watch videos saved on your DiskStation with your iOS/Android devices or Windows Phone on the go.

This chapter explains how to install and enable Photo Station, set thumbnails and video settings, manage Photo Station user accounts, create and manage albums and blogs, browse photos and videos with Timeline, manage tags for photos, perform face recognition, and view and edit photos and videos.

Install Photo Station Go to Main Menu > Package Center to install Photo Station owned by DSM admin.

To install Photo Station: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it. The photo shared folder will be created automatically to contain Photo Station data.

Support and Limitations Video formats viewable on Photo Station: 3G2, 3GP, ASF, AVI, DAT, DivX, FLV, M4V, MOV, MP4, MPEG,

MPG, QT, WMV, XviD Video formats not viewable but downloadable on Photo Station: RM, RMVB, VOB, RV30, RV40, AC3,

AMR, WMA3 Browser requirement: JavaScript enabled Microsoft Internet Explorer requirement: ActiveX controls and plug-ins and Active scripting enabled Upload limit: If you upload contents with Photo Station, you can only upload up to 2GB of contents at a time.

Synology DiskStation User's Guide

Based on DSM 4.1

101 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Enable Personal Photo Station DSM admin or a user belonging to the administrators group can enable Personal Photo Station service to allow all DiskStation users to have their own Personal Photo Station.

To enable Personal Photo Station service for DiskStation users (by admin or a user belonging to the administrators group): 1 Click the figure icon at the top-right corner of your DSM desktop, and then go to Options > Photo Station.

2 Tick Enable Personal Photo Station - [username]. 3 Click OK.

To edit Personal Photo Station settings: 1 Tick Set new folders as public albums if you want the uploaded photo albums available to visitors.

2 Click Re-index to reconstruct the index structure of the image files if you found missing images in Photo Station.

3 Click OK.

To launch Personal Photo Station, do any of the following: Click Launch Photo Station. Go to Main Menu and click Photo Station - [username]. Type the following web address in the address bar of your web browser:

http://Synology_Server_IP_Address/photo/ Photo Station will be launched in a new browser window.

To connect via mobile devices: You can download DS photo+ from Apple's App Store, Android Market, or Windows Marketplace to browse the photos in Photo Station with your iOS/Android device or Windows Phone. For more information about DS photo+, see "Chapter 19: Communicate with Mobile Devices" on Page 175.

Synology DiskStation User's Guide

Based on DSM 4.1

102 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Enable Personal Photo Station for DSM Users DSM admin (or a user belonging to the administrators group if Photo Station's account system is set as DSM accounts) can enable Personal Photo Station service to allow all DSM users to have their own Personal Photo Station.

To enable Personal Photo Station service for DSM users: 1 Sign in to Photo Station as DSM admin (or a user belonging to the administrators group if Photo Station's

account system is set as DSM accounts), and then go to Settings > General. 2 Tick Enable Personal Photo Station service and then click Save.

3 After Photo Station is enabled, users can edit the Photo Station settings, which are basically the same as those of admins Photo Station.

Note:

Please log in to DSM as admin (or a user belonging to the administrators group), go to Main Menu > Control Panel > User > User Home to activate user home service first before enabling Personal Photo Station service. See "Create User's Home Folder" on Page 58 for more information.

Only local user can use Personal Photo Station.

To connect to the users Photo Station, do any of the following: Click Launch Photo Station. Go to Main Menu and click Photo Station [username]. Type the following web address in the address bar of your web browser:

http://Synology_Server_IP_Address/~username/photo/

Manage Photo Station User Accounts When Photo Station or Personal Photo Station is enabled by DSM admin or DSM users, they become their Photo Stations administrator, who can create, modify, or delete their Photo Station's user accounts.

Choose Account System Photo Station administrators can choose to integrate DSM user accounts into Photo Station, or manage independent user accounts.

Note: This option is not available for Personal Photo Station.

To choose an account system for Photo Station (not available for Personal Photo Station): 1 Sign in to Photo Station as DSM admin, and then go to Settings > General. 2 Choose either of the following options from the Account system drop-down menu:

DSM accounts: This option allows DSM admin to integrate DSM accounts into Photo Station. Photo Station accounts: This option allows DSM admin to manage independent accounts for Photo

Station. 3 Click Save.

Manage User Accounts Photo Station administrators can create, edit, or delete user accounts.

Note: Creating or deleting user accounts is not available if Photo Station's account system is set as DSM accounts. You will need to log in to DSM as DSM admin (or a user belonging to the administrators group), and then go to Main Menu > Control Panel > User to manage the user accounts.

To create a user account: 1 Sign in to Photo Station as DSM admin, and then go to Settings > User Accounts.

2 Click Create User and enter the username, description, and password.

Synology DiskStation User's Guide

Based on DSM 4.1

103 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

3 If you like, do any of the following in the Other Settings section:

Choose whether you want to disable this account. Doing so will deny the user's access until it's enabled again.

Choose whether to allow this user to modify his/her account information. Choose whether you want to set this user as Photo Stations administrator. If this user is set as admin,

he/she will be able to sign in with his/her own account and perform administrative privileges. 4 Click Save.

To edit a user account: 1 Sign in to Photo Station as DSM admin, and then go to Settings > User Accounts.

2 Select the user and click Edit. 3 Make changes to the settings. (See To create a user account above for more information.)

4 If you want to modify the user's access privileges to existing photo albums, tick the Browse Album or Upload Files checkboxes under the Access Permissions tab.

5 Click Save.

To delete a user account: 1 Sign in to Photo Station as DSM admin, and then go to Settings > User Accounts.

2 Select the user, click Delete, and then click Yes.

Create, Manage, and View Albums, Photos, and Videos You as DSM admin and users belonging to the administrators group can create albums and upload photos via various methods depending on which suits you best, manage albums with different functions, view uploaded files with quality thumbnail for better browsing experience, and edit photos and videos on the Photos page.

Create Albums If you have Photo Stations administrative privilege, you can use any of the following methods to upload the new album to the photo shared folder (for the default Photo Station managed by DiskStation admin) or home/photo folder (for Personal Photo Stations managed DiskStation users).

Note: The length of time required largely depends on the size and the amount of files. Of all the methods mentioned in this section, we recommend you use Photo Uploader (in Synology Assistant), which utilizes your computers system resources for quicker thumbnail generation and video compression before the uploading process starts.

Upload Albums Using Photo Uploader (Synology Assistant) You can upload your albums to Synology DiskStation using Photo Uploader, one of the several functions of Synology Assistant.

Before uploading, Photo Uploader will use your computer to compress videos to H.264 format, and generate thumbnails for the photos and videos.

Note: For more information about using Photo Uploader, see the Help of Synology Assistant.

Create Album Using Photo Station Go to Photo Stations home page, choose Add > New Album, and follow onscreen instructions to create a new album.

Note: See "Upload Photos and Videos to an Album" on Page 104 for more information about uploading photos and videos to an album.

Upload via File Sharing Protocols or File Station Select the photos and videos on your computer, and put them in a folder that will become your new album.

Synology DiskStation User's Guide

Based on DSM 4.1

104 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

To upload within the Intranet: If your computer and Synology DiskStation are within the same Intranet, you can upload the album via the file sharing protocols for your platform.

Note: For more information about accessing folders within the Intranet, see "Access Files within the Intranet" on Page 67.

To upload over the Internet: If your computer and Synology DiskStation are not within the same Intranet, you can upload your album via File Station or FTP.

Note: For more information about accessing folders over the Internet, see "Access Files via FTP" on Page 70 or "Access Files via File Station" on Page 73.

Upload Using DS photo+ (Mobile App) If you have an iOS/Android device or Windows Phone, you can upload photos from your device to Photo Station with DS photo+. See the DS photo+ Help for more information.

Manage Albums Manage your albums with the upload, delete, download, and reorder functions. Edit the titles, descriptions, and access privileges according to your need. You can also enable virtual albums in Photo Station.

Upload Photos and Videos to an Album You can upload photos or videos to sub-folders in the photo shared folder (for Photo Station) or the home/photo folder (for Personal Photo Station).

To upload photos and videos to an album: 1 Choose Add > Upload from my computer or Copy from my DiskStation.

2 In the window that appears, do any of the following:

If you want to upload photos or videos to the current folder, choose Upload to the current album.

Note: This option is available only when you are already browsing photos within an album.

If you want to upload photos or videos to a subfolder, choose Upload to, and name the subfolder.

Note: If you are browsing albums at Photo Station's home page, you can choose from the drop-down menu to set the new folder as a public, private, or password locked album.

3 Click Browse and then select the photos or videos you want to upload. After you've made your selection, the selected photos or videos will be shown in the window. Use the Delete or Clear All button to change your selection.

4 Choose from any of the following drop-down menus:

Options: Decide whether to convert thumbnails that will be uploaded along with the original photos. If the file already exists: Decide whether to overwrite or skip files that already exist in the album.

5 Click Upload to start uploading, which may take a while to complete. When the upload process is complete, refresh your browser window to see the uploaded photos or videos.

Note:

You can only upload up to 2GB of contents at a time. Only users with the access and upload rights to the album can upload photos and videos. See "Set Album's

Privacy Settings" on Page 105 for more information.

Download Albums You can allow users to download albums via Photo Station.

Synology DiskStation User's Guide

Based on DSM 4.1

105 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

To allow users to download albums: 1 Go to Settings and click the Photos tab.

2 Tick Allow users to download album.

3 Click Save.

To download an album: 1 When you are on Photo Station's home page, click an album cover to enter the album's thumbnail page(s).

2 Choose More > Download.

3 In the window that appears, do any of the following:

Choose Download all to download the entire album as a zip file. Choose Select items to download, select the items you want to download and click OK. (Press and hold

Shift or Ctrl while making multiple selections.) Your selections will be downloaded as a zip file.

Reorder Albums 1 Go to Settings and click the Photos tab.

2 Do any of the following:

Choose the number of albums per page from the Albums per page drop-down menu. Choose Ascending or Descending from the Sort by folder name drop-down menu to sort albums in

ascending or descending order. Choose Sort by preference, click Rearrange, click OK, and then drag any album to change its order.

3 Click Save.

Set Album's Privacy Settings 1 Go to Settings and click the Photos tab.

2 Click Access Permissions and tick the checkboxes under any of the following headers:

Public: The album can be seen by all viewers. Private: The album can be accessed by user accounts with proper access permissions. Password: If you select this option, enter a password under the Password header. The album will be

locked unless viewers enter the correct password to unlock the album. 3 Click Save.

Enable Virtual Album Photo Station allows you to display the most recent photos and videos in virtual albums, which will be listed in front of all the other albums on the Photos page.

To enable virtual album: 1 Go to Settings and click the Photos tab.

2 Click Virtual Album.

3 Tick the checkboxes to enable any of the following virtual albums:

Recent photos Recent videos Recently commented photos Recently commented videos People tag Geotag Descriptive tag

Note: If you have ticked People tag, a virtual album containing unconfirmed people tags will appear with the album name: To-be-confirmed Album.

Synology DiskStation User's Guide

Based on DSM 4.1

106 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

4 Choose from the drop-down menus to specify the number of photos or videos that will be displayed in the selected virtual albums (not applicable to People tag, Geotag, and Descriptive tag).

5 Click Save.

Delete or Move Album 1 When you are on Photo Station's home page, choose Manage > Delete or Move.

2 Select the albums you want to delete or move, and then follow onscreen instructions to delete the selected albums or move them into another album.

Set Thumbnail and Video Settings Go to Main Menu > Control Panel > Media Indexing Service to set the thumbnail quality and monitor the conversion progress

When you upload photos or videos for use with Media Server or Photo Station, thumbnails will be created for better browsing experience. You can set the thumbnail quality and monitor the thumbnail creation progress.

Meanwhile, if you would like to view videos in the photo shared folder of Photo Station on your mobile devices, you can enable video conversion and view the conversion progress as well.

For more information about setting thumbnail quality and monitoring thumbnail creation progress, click the Help button (with a question mark) at the top-right corner.

View and Edit Photos and Videos After the album is created, you can log in to Photo Station and go to the Photos page, where you can see the albums you uploaded. Click the album cover to browse photos or play videos within the album.

To manage a photo or video, click the following links:

Information: See the metadata information of the photo or video. Slideshow: Start a slideshow of the album. Map or Geotag: See where the photo is taken (for Map) or set the photo's geotag information by right-clicking

on the map and setting the coordinates (for Geotag). Share > Blog it: Embed the photo or video into a new blog post.

Synology DiskStation User's Guide

Based on DSM 4.1

107 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Share > Link to > Facebook, Google+, Twitter or Plurk: Share the photo or videos link to the social networks.

Share > Upload to Facebook, Upload to Twitter, or Upload to Picasa: Upload the photo or video to the social networks.

Share > Get photo link: Share the link of the photo by pasting it to email or instant message. Share > Facebook, Google+, Twitter or Plurk: Share the photo or videos link to the social networks. Edit: Choose a web-based external photo editor to edit the photo. .

Note: Before sharing a link or editing a photo, make sure you have configured port forwarding of Photo Station on your router. If the public HTTP port is not 80, set the router port number at Settings > General.

Add Comments: Add comments to the photo or video. Download (video only): Download the video to your computer.

Note: This option is available only if you have ticked Allow users to download album and Allow users to download video files at Settings > Photos.

Set as Album Cover (top-right corner): Set the photo or video as the album cover. Rotate (top-right corner; photo only): Rotate the photo. Delete (top-right corner): Delete the photo or video.

Share with Social Networks When you browse your albums, you can upload photos from Photo Station to your Facebook, Twitter, or Picasa accounts, or sync Photo Station albums with Facebook.

To upload photos to social networks: 1 Browse to the photos you want to upload, and then choose Share > Upload to Facebook, Upload to Twitter,

or Upload to Picasa.

2 Click the thumbnails to select your photos, and then click Upload to Facebook, Upload to Twitter, or Upload to Picasa.

3 In the window that appears, click Connect with Facebook, Connect with Twitter, or Connect with Picasa and then authorize with your social network account.

4 If you want to upload the photos to a new album, choose Create a new album and name the new album. If you want to upload the photos to an existing album, choose Upload to an existing album and choose the album from the drop-down menu.

5 Click OK and click Close when the upload process is done.

Now you can log in to Facebook to see the uploaded photos.

To authorize with Facebook before syncing albums: 1 Go to Settings and click the General tab.

2 Click Connect with Facebook, authorize using your Facebook account info, and then click Log In. If the account is successfully authorized, the status will be changed to "[Facebook account name] is authorized".

3 Tick Sync with Facebook regularly if you want Photo Station to sync albums with Facebook regularly.

4 If you want to cancel Facebook authorization, click Cancel authorization and then click Yes.

To manage other social network settings: If you want to upload high quality photos for better browsing experience, tick Upload original photos to

social networking websites. If you want to grant Photo Station users privileges to share photos, links, or blog articles over social networks,

enable Allow users to share photos, links, and blog articles on social networking websites first.

Synology DiskStation User's Guide

Based on DSM 4.1

108 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

If you want to give guests visiting your Photo Station the rights to share your photos to social networks, tick Allow guests to upload photos to Facebook, Twitter, and Picasa.

To sync a Photo Station album with Facebook: 1 Make sure you have completed Facebook authorization (see above).

2 When you are within an album, choose More > Sync with Facebook.

3 In the window that appears, name the new Facebook album, and then click OK.

4 If you want to sync the album immediately, choose More > Sync with Facebook right now.

Now you can login to Facebook to see the synced album. You can also see synced albums by going to Photo Station's home page and clicking Albums synced with Facebook.

To stop syncing with Facebook: When you are within a synced album, choose More > Don't sync with Facebook.

Browse Photos and Videos with Timeline Browsing photos and videos with Timeline is intuitive and easy. You can navigate the files by scrolling up or down the mouse wheel to quickly find photos or videos of a specific period of time, and simultaneously view where they are taken or recorded with Google Maps displayed below.

To enable Timeline: 1 Go to Settings and click the Photos tab.

2 In the Basic Settings section, tick Enable Timeline function.

3 Click Save.

To configure Timeline settings: 1 Go to Timeline and click Settings at the top-left corner.

2 Do the following to determine how you want your photos or videos to be presented with Timeline:

Click the drop-down menus to choose in what order items are to be displayed on your preferred time scale. Tick the checkbox to restrict displaying tags on Timeline to people tag only.

3 Click Save to apply the changes.

Manage Tags for Photos You can tag your photos with people, locations, and descriptions, and manage people tags, geotags, and descriptive tags with the add, edit, delete, and confirm functions.

To add a people tag, descriptive tag, or geotag, do the following: Go to the Photos page, and select any album to which you want to add tags to enter the thumbnail view. Click

Manage at the top of the page, and choose Add descriptive tag/Add geotag. Select the photos you want to create tags for, and click Add descriptive tag/Add geotag at the top of the page.

Go to the Photos page, select any photo(s) to which you want to add tags within an album. Click Tag at the top of the page, and choose any of the following. People tag: Click to drag on photos in which people are present to create tags. In the text field that appears,

enter the name of the person. If there is more than one tag on a photo, you can click Confirm all people tags or Remove all people tags to confirm or delete all tags at a time.

Geotag: Click to specify where the photo was taken by choosing a place suggested by Google Maps from the Nearby Places drop-down menu, below which you can type in more geographic information about the location.

Descriptive tag: Click to enter any information you want for the photo. Face recognition (unavailable if face recognition is not enabled; see Perform Face Recognition on Page

109): Click to have the faces on the photo detected. If there are existing people tags already, you will be asked whether to delete the tags before the action is performed.

Synology DiskStation User's Guide

Based on DSM 4.1

109 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Note: These options are available only when you are viewing one single photo within an album.

To batch edit or delete tags: 1 Go to the Settings page, click the Photos tab, and click Tag in the Basic Settings section.

2 Select any people tag, geotag, or descriptive tag from the list, and do the following:

Click Edit or double-click the selected tag, and edit the item in the pop-up window. Click Delete to remove the selected tags. Press and hold Shift or Ctrl while making multiple selections.

3 Click Close to close the window.

Perform Face Recognition By enabling face recognition function, you can not only configure Photo Station to detect faces and perform auto recognition, but also identify faces yourselves manually. Go to the Settings page and click the Help tab for detailed instructions.

To enable face recognition: 1 Go to the Settings page and click the Photos tab.

2 In the Face Recognition section, tick Enable face recognition to enable the face detection function.

3 Click Save.

Note: If this option is not enabled, you are not allowed to configure Photo Station to auto recognize faces for you.

To activate auto face recognition: 1 Go to the Settings page and click the Photos tab.

2 In the Face Recognition section, tick Perform auto face recognition for new photos.

Note: The name you input in the name field will be collected into the database of Photo Station, and will be retrieved and displayed on the drop-down list as a suggestion later whenever a people tag is created.

3 If you want to find people appearing in all photos, click the Find people for all photos button to scan all photos.

Note: If faces on the photos cannot be recognized, they will be circled in dotted lines with a question mark and no suggestions will be provided on the drop-down list. You need to identify them one by one.

4 Click Save.

Customize Album Layout You can go to Settings and click the Photos tab to customize album layout.

To customize layout: 1 Click Theme, click Layout at the top-left corner, and then edit the following layout options. You can see a

preview of your layout adjustment in the lower half of the browser window. If you want to reset the layout options to default settings, click Reset to default settings.

Template: You can choose to have a dark-colored or light-colored template, and adjust the transparency of the template.

Background Image: This could be a pattern or photo provided by Synology, or an image uploaded from your computer.

Background Color or Font Color: Choose from the drop-down menus to find your favorite background or font color.

Logo Image: This could be the default image or an image uploaded from your computer, or you could choose to hide the logo image.

Synology DiskStation User's Guide

Based on DSM 4.1

110 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

2 If you know how to use CSS codes to fine-tune your layout, click CSS Customization at the top-left corner, enter your CSS codes in the text field, and then click Preview to see a preview of your adjustment in the lower half of the browser window.

3 Click OK to save the changes and return to the Settings page.

To customize thumbnails within any albums: 1 Do any of the following:

Specify the default thumbnail mode by choosing either of the following: Simple mode: Display square-shaped photo thumbnails by cropping the edges of photos. Detail mode: Display photo thumbnails by showing the full photos and displaying the titles beneath the

photos. For each mode, you can specify the default thumbnail size in the Default thumbnail size field.

Note: When you are browsing photo thumbnails within an album, you can also specify the default thumbnail mode and size using the slider at the top-right corner and the More > Layout menu.

Choose the number of thumbnails per page from the Thumbnail per page drop-down menu. Choose from the Sort by drop-down menu to determine how thumbnails are sorted, and then choose from

the Sort order drop-down menu to sort thumbnails in ascending or descending order. 2 Click Save.

Use the Blog If you are a Photo Station administrator, you can sign in to enable, manage and back up your personal blog. Moreover, you can also personalize your blog space by adjusting its layout.

Modify Blog Settings You can go to Settings > Blog to enable the blog function and mange its settings.

To enable the blog function: 1 Tick Enable the blog function.

2 Click Save.

To modify blog layout, do any of the following: Click Other Settings and follow onscreen instructions to edit the blog's title, number of posts on the main page,

and the autosave interval. Click Blog Banner and follow onscreen instructions to customize the banner section (below the logo image)

on the blog's main page. Click Theme, and see To customize layout for more information about theme-related settings. Click Layout & Modules, and do the following:

a In the Layout section, choose a layout to put your modules into the left or right panel on the main page.

b In the Modules section, drag and drop the modules between the two folders to decide which modules will be used for your blog.

c Click Save.

If you want to modify the settings of a module, choose it from the drop-down menu in the Module Settings section, click Customize, and then follow onscreen instructions to complete the settings. The modules can be used to search previous articles or display various information (your personal info, an album slideshow, or links to your friends' sites, blog archives, etc).

Note: You are not allowed to customize a module if its name is appended with "(Setup unavailable)".

Synology DiskStation User's Guide

Based on DSM 4.1

111 Chapter 12: Share Photos, Videos, and Blogs with Photo Station

Manage Blog Posts You can go to Blog to add, edit, and delete blog posts. Your readers can view or share your posts, and add their comments to interact.

To add a new post: 1 Click New post on the left side.

2 Do the following to add a new post:

Enter the post title, edit the post, and insert images or videos if you wish. To insert a video, click the Insert/edit embedded media button and enter the video URL.

Select a label action from the Label actions drop-down menu. 3 Click the Settings tab if you want to manage the following settings:

Choose who can read the blog post from the Readers drop-down menu. If you want to display a post abstract on the main page, tick Show abstract when article is on main page

and enter the abstract message in the text field. To allow visitors to post comments, tick Allow comments.

Click Publish.

Limitation:

For the post title, you can enter up to 512 characters, whereas 40,960 characters are allowed for the post content. The following html tags in article content will be filtered out automatically:

form, input, script, table, td, tr, tbody, th, html, body.

To edit or delete a post: Click the post title to see the full article, click Edit or Delete, and then follow onscreen instructions to edit or delete the post.

Readers can click the post title and do any of the following to interact: Click Add Comments to add comments to the post. Click the Facebook, Plurk, or Twitter icon to share the article's link to the social networks.

Back up your Blog You can go to Settings > Blog to back up your blog and save the backup file on your computer.

To back up your blog: 1 Choose Back up blog and click Start. 2 Follow onscreen instructions to save the backup file (synoblog.backup) on your computer.

To restore the backup data: 1 Choose Restore blog data, choose to overwrite or preserve existing blog data, and then click the button next

to Select a backup file to locate the backup file on your computer.

2 Click Start and Yes to restore the backup data.

112

Chapter

13 Chapter 13: Play Music with Audio Station

Audio Station is a web-based audio application, allowing you to access the music library on your Synology DiskStation, choose available audio sources on the local area network, and add your favorite music to playlists for playback.

With Audio Station, you can also browse and play songs on your iPod or on the DLNA-certified Digital Media Servers, and listen to Internet radio.

Audio Station can play music through USB speakers connected to your Synology DiskStation, your computer, DLNA-certified Digital Media Renderers, AirPlay compatible devices1

This chapter explains how to install Audio Station, choose audio source, browse music from the source, add music to the playlist, and add music and playlists to the queue panel for playback.

, or external speakers or home stereo equipment connected to the audio dock of Synology Remote (sold separately).

Note: Audio Station supports the following formats:

Audio: (USB Mode) AAC, FLAC, M4A, MP3, Ogg Vorbis, WMA, WMA VBR; (Streaming Mode) MP3, M4A, M4B Playlist: M3U, WPL

Install Audio Station Go to Main Menu > Package Center to install Audio Station.

--------- 1 AirPlay is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

113 Chapter 13: Play Music with Audio Station

To install Audio Station: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it. The music shared folder will be created automatically to contain your Audio Station data.

To launch Audio Station: Go to Main Menu and click Audio Station.

To connect via mobile devices: You can download DS audio from Apple's App Store, Android Market, or Windows Marketplace to play the music in Audio Station with your iOS/Android device or Windows Phone. For more information about DS audio, see "Chapter 19: Communicate with Mobile Devices" on Page 175.

Choose Audio Source On the left section of Audio Station are several audio sources you can choose from for playback on Audio Station.

Library The library contains music in the music shared folders or any other indexed folders of your Synology DiskStation, which will be organized into the following categories.

To browse your music library, do any of the following: Click All Music to browse all music in the music shared folder. Click By Folder to browse music by directory. Click By Album to browse music by the album information of the song. Click By Artist to browse music by the artist information of the song. Click By Composer to browse music by the composer of the song. Click By Genre to browse music by the genre information of the song. Click Random100 to browse 100 songs chosen randomly by the system. Click Recently added to browse the albums that have been recently added.

Synology DiskStation User's Guide

Based on DSM 4.1

114 Chapter 13: Play Music with Audio Station

Note: To add a folder as an indexed folder, log in to DSM as admin (or a user belonging to the administrators group), and then go to Main Menu > Control Panel > Media Indexing Service > Indexed Folder. For more information, click the Help button at the top-right corner of the window.

Personal and Shared Playlist You can click the disclosure triangle next to Personal Playlist or Shared Playlist to see your personal playlists (viewable by yourself only) or shared playlists (viewable by all DiskStation users with access to Audio Station).

To edit your playlist, do any of the following: Select Refresh to update all playlists. Select New Playlist to create a new playlist.

Note: Only users with the Manage Playlist privilege (in Settings > Privileges in the top-left corner) can edit or add playlists.

Smart Playlist You can click the disclosure triangle next to Smart Playlist to see your smart playlists.

To refresh your smart playlist: Select Refresh to update all smart playlists.

To add or edit a smart playlist, do any of the following: Add or edit in DSM:

a Go to Main Menu > iTunes Server in Synology DiskStation Manager.

b Click Smart Playlist to add or edit your playlist.

Add or edit in Audio Station: See "Work with Playlist" on Page 118 for more information.

iPod If there is an iPod classic connected to the USB port of your DiskStation, you can click the disclosure triangle next to iPod to see the iPod connected to the USB port on Synology DiskStation.

To refresh iPod contents: Select Refresh to update the iPod contents.

Note:

Audio Station only supports iPods formatted by iTunes for Windows. Only users with the USB/UPnP Renderer privilege (in Settings > Privileges in the top left corner) have access to

iPod contents.

Internet Radio Audio Station comes with lists of Internet radio stations provided by SHOUTCast(TM) and RadioIO. You can also add your radio stations manually.

To add a radio station: 1 Select Add Radio Station to open the settings window.

2 Fill in the corresponding information (Name, Description, and URL) to add a radio station to the User defined list.

To see the list of radio stations: 1 Select an existing Internet radio provider or User defined list.

2 See the details of its radio stations in the main section.

3 Drag your favorite radio stations to My favorite for quick access.

Synology DiskStation User's Guide

Based on DSM 4.1

115 Chapter 13: Play Music with Audio Station

Media Server Audio Station can browse and play media contents on DLNA-certified Digital Media Servers or other Synology DiskStations on the local area network.

To search for media servers on the local area network: Select Scan Media Server to search for available servers.

Note: Only users with the UPnP Browsing privilege (in Settings > Privileges in the top left corner) can play media server contents.

AirPlay Device Audio Station can stream media contents to AirPlay compatible devices for playback.

To play media contents through AirPlay devices: 1 In the music player section on the right side, click the output mode drop-down menu to select the device.

2 Do either of the following:

If there is only one device, click the device to play media contents. If there are multiple devices, click Multiple AirPlay Devices on the drop-down menu. In the window that

appears, tick the checkbox(es) of the device(s) you want for music playback. 3 Click OK.

Organize Your Music After selecting one of the audio sources on the left side, you can browse its contents in the main section of the Audio Station, and organize your favorite music into playlists.

Browse Music You can change views, see your current location, and use the search field to find your music quickly.

Note: If you see unreadable song titles, album names, or artist names while browsing through your music, go to Synology DiskStation Manager to set the correct codepage that matches the language of your computer, and then re- index your music. See "Language" on Page 23 and "Search Music" on Page 117 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

116 Chapter 13: Play Music with Audio Station

Personal Music Library DSM admin or users belonging to the administrators group can enable personal library to allow DiskStation users to have their own personal music library. Once users' personal library is enabled, they can choose to browse and play either their own personal music or both shared and personal music.

To enable personal library for DiskStation users: 1 Click Settings and then click the Personal Library tab.

2 Tick Enable Personal Library and click OK.

To browse and play music collection: 1 Select either of the following to browse and play music in the main area of Audio Station:

Shared (files stored in the music shared folder and any other indexed folders which contain music files) and personal music

Personal music (files stored in the home/music folder) 2 Click OK. File indexing will be performed right away.

Note: Only personal music files will be indexed. You may click Re-index to re-construct the index structure of the files if you found files missing.

Change Views By clicking the three buttons above the main section, you can browse your songs in different views.

There are three views to browse your songs: List (the first button): Organize your items in a list. Artwork (the second button): The icons or artwork (if any) of your songs or folders appear in the main section. Cover Flow (the third button): All icons/artwork and song/directory names appear using Cover Flow, a fancy

way to flip through your library.

Note: Cover flow is available only when browsing the library using By Album or By Artist. Only when music files are in the following formats can their cover art be displayed in Audio Station: MP3, M4A.

See Your Current Location You can use the Up icon (with an upward arrow) or any of the path names above the main area to go back to previous directories.

To go back to a previous directory, do any of the following: Click the Up button to go back to the last directory. Click any of the path names to the right of the Up icon to go back to a previous directory.

Synology DiskStation User's Guide

Based on DSM 4.1

117 Chapter 13: Play Music with Audio Station

Search Music You can use the search field above the music player section of Audio Station to search your music.

To search music: 1 Choose a category from the All Categories drop-down menu.

2 Enter a word or phrase in the search field.

3 Press Enter (PC) or Return (Mac) on your keyboard.

The search result will appear in the main section.

To filter the artist, album, or genre to show in the main section: When you are at the root directory of By Album, By Artist, or By Genre, you can see the Filter field above the main area of Audio Station. Enter a keyword in the field and press "Enter" on your keyboard to quickly find the album, artist, or genre you want, depending on your current location.

To re-index audio files: 1 Go to Main Menu > Control Panel > Media Indexing Service.

2 Under the Media Indexing Service tab, click Re-index to reconstruct the index structure of the audio files If you found missing music in Audio Station. The process will be executed in the background.

Edit Music Information With Audio Station, you can view or edit the information of music files.

To view or edit music information: 1 Select one or more music files, and right-click to choose Edit music tag.

2 Here you can view or modify the music file's information, or choose a language from the Codepage drop-down menu to convert non-Unicode text to Unicode and display the text in the correct language. (System default is the codepage you specified at Main Menu > Control Panel > Regional Options.)

3 Click Save to finish the setup.

Note:

You can only edit music files in the following formats: mp3, wma, wav, ogg. Only users with the Edit Music Tag privilege (in Settings > Privileges in the top left corner) can edit music

information.

To edit song lyrics: 1 Select one music file, and right-click to choose Edit music tag.

Note: You can only edit lyrics of one music file at a time. The edit mode will be disabled upon multiple selections.

2 Click the Lyrics tab to modify lyrics for the song. Lyrics is available only under any of the following circumstances:

If the music file is embedded with lyrics. If the lyrics file (in .lrc format) has the same file name as the music file and both are stored in the same

folder.

Record Diagnostic Log The log can help determine the cause of the problem when you contact Synology Support for assistance.

To manage Audio Station communication log: 1 Click Settings and then click the Options tab.

2 Tick Enable Audio Station log for diagnosis and click OK. You can download or clear the recorded log by clicking Download or Clear.

Synology DiskStation User's Guide

Based on DSM 4.1

118 Chapter 13: Play Music with Audio Station

Display Additional Attributes You can display additional attributes of your music to show them in new columns of the main section.

To display additional attributes: 1 Hover the pointer over any column header of the main section, and click the downward arrow that appears to

the right of the header.

2 From the pop-up menu, choose the Columns submenu.

3 Tick the checkboxes next to the extra attributes to show them in new columns.

Work with Playlist You can organize your songs into playlists to categorize and access your favorite music more easily.

There are two types of playlists: Personal playlist (viewable by the DiskStation user who creates the playlist) and shared playlist (viewable by all DiskStation users with access to Audio Station).

To create a playlist, do any of the following: Method 1:

a Click New Playlist under Personal Playlist or Shared Playlist to create an empty playlist.

b While browsing through the library, select any songs/radio stations in the main section.

c Drag the selected songs/radio stations to the playlist you just created.

Method 2: a While browsing through your library, select any songs/radio stations you want in the main section.

b Drag the selected songs/radio stations to New Playlist below Personal Playlist or Shared Playlist. Method 3:

a Go to Playlist > New Playlist at the top-left corner to create an empty personal playlist (if you want to create a shared playlist, tick Add as shared playlist.)

b While browsing through the library, select any songs in the main area, and then drag them to the playlist you just created.

To create a smart playlist: 1 Go to Playlist > New Smart Playlist at the top-left corner to create a personal smart playlist.

2 Name the playlist and click OK.

3 In the window that appears, click Add Rule to set the rules, and click OK.

4 You will see the new smart playlist under Personal Playlist on the left panel.

Note:

You cannot add folders to playlists. You can also add songs from the queue to a new playlist. See "About the Output Modes and the Queue Panel" on

Page 119 for more information. DSM administrators (DSM admin or a user belonging to the administrators group) can create shared smart

playlists by going to DSM's Main Menu > iTunes Server and clicking the Smart Playlist button.

To rename or remove a playlist: Right-click the playlist and choose Rename or Delete.

To adjust the order of songs in a playlist, do any of the following: Select songs in the main section and click Up or Down on the top to move them up or down in the playlist. Select and drag the songs up or down in the main section.

To remove songs from a playlist: Press and hold Shift or Ctrl while making multiple selections, and right-click to choose Delete.

To copy a shared playlist to a personal playlist and vice versa: Right-click the playlist and choose Copy to personal playlist or Copy to shared playlist.

Synology DiskStation User's Guide

Based on DSM 4.1

119 Chapter 13: Play Music with Audio Station

To edit the rules of a smart playlist: Right-click the playlist and choose Edit smart playlist to modify the rules.

Play Music The right side of Audio Station consists of the queue panel and the music player. You can play the music added to the queue with the music player.

About the Output Modes and the Queue Panel To play music via different devices, you can add songs to the different output modes in the queue panel.

The output modes include the following: Streaming Mode: Stream music to your computer for playback via the speakers of your computer. USB Mode: Play music via the USB speakers connected to the USB port of your Synology DiskStation, or via

external speakers or home stereo equipment connected to the audio dock of Synology Remote (sold separately).

Media Renderer: Play music via a Digital Media Renderer (DMR) or an AirPlay1

Note:

compatible device within your local area network.

USB Mode and Media Renderer mode are available only when corresponding output devices are found by Audio Station.

If you play music via the Optical S/PDIF Output port on the audio dock of Synology Remote, adjust the remote volume to maximum to achieve best audio quality.

For more information about Synology Remote, visit www.synology.com.

To switch between output modes: Choose any of them from the drop-down menu at the top of the music player.

Note: You can play music in different modes at the same time.

--------- 1 AirPlay is supported on specific models only. Visit www.synology.com for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

120 Chapter 13: Play Music with Audio Station

High Quality Output You can enjoy better audio quality if your music files and the sound card of the DAC (Digital-to-analog converter) connected to your DiskStation support 24-bit audio output under USB mode.

To enable high quality output: 1 Go to Settings > Options.

2 Tick Enable high quality output for USB mode.

3 Click OK.

Add Music to Queue You can add your songs from the library to the queue panel on the right side for playback.

To add your songs from the library to the queue panel, do any of the following: Double-click an item in the main section to add it to the queue and start playing it right away. Select one or more items in the main section, and then drag them to the queue. Select one or more items in the main section, right-click and choose Add selections to queue to add selected

songs to the queue. Right-click an item and choose Add all to queue to add all items in the same directory to the queue.

Add a Playlist to Queue You can add or append playlists to the queue panel on the right side for playback.

To add a playlist to the queue and replace the existing songs in the queue: Right-click the playlist and choose Play. Audio Station will play the songs in the playlist immediately.

To append a playlist to the queue without replacing the existing songs in the queue: Right-click the playlist and choose Add to queue.

Manage Songs in the Queue Panel To play a song in the queue: Right-click the song and choose Play to play it right away.

To adjust the order of songs in the queue, do any of the following: Select and drag the songs up and down in the queue. Select the song, right-click one of them, and choose Up or Down.

To add all songs in the current queue panel to a new playlist: Right-click any of the songs and choose Save playing queue.

To remove a song from the queue: Select the song, right-click and choose Remove.

To remove all songs from the queue: Right-click any of the songs and choose Remove all.

Note: Only users with the USB/UPnP Renderer privilege (in Settings > Privileges in the top left corner) can play music through USB devices or UPnP renderers.

Play Music with Music Player You can play the music added to the queue with the music player. The upper part of the music player displays the information of the currently playing music, including the song's title, album, artist, and duration. The lower part contains the controls you can use to control music playback.

Synology DiskStation User's Guide

Based on DSM 4.1

121 Chapter 13: Play Music with Audio Station

To play a song: Click Play/Pause, Next, or Previous.

To skip to any point in the currently playing song: Drag the playhead along the timeline (below the song's duration) to any point you want.

To adjust the volume: Drag the volume slider below the timeline.

To repeat all songs or currently playing song in the queue, or turn off repeat: Click the No repeat, repeat all, or repeat one button (the first button from the left in the lower-right corner of the music player).

To play the songs in the queue in random order: Click Shuffle on/off (the second button from the left in the lower right corner of the music player).

To customize sound frequencies with equalizer (USB mode only): Click the EQ button to open the equalizer, tick the checkbox, and choose a preset from the drop-down menu. You can also drag the sliders and save your own User Defined preset.

Play Music with Mini Player Click the Switch to mini player button at the top-right corner of the music player.

To play a song: Click Play/Pause, Next, or Previous.

To skip to any point in the currently playing song: Drag the playhead along the timeline (below the song's duration) to any point you want.

To adjust the volume: Drag the volume slider below the timeline.

To switch back to the full mode: Click the Switch to full mode button at the bottom-right corner of the mini player.

Manage Transcoder Managing transcoder will allow Audio Station to support more audio formats under streaming mode. The following audio formats will be transcoded if your browser does not support them: FLAC, APE, AAC, OGG, AIFF, WMA.

To manage transcoder: 1 Go to Settings > Transcoder. 2 Choose any of the following options (available on specific models only):

Transcode to WAV format: WAV format is supported on specific browsers only. (Firefox 3.6 and above, Safari 5, Opera 10.60)

Transcode to MP3 format: By transcoding to MP3, you enjoy better browser support. However, this also occupies more system resources. In addition to the formats listed above, WAV format will also be transcoded to MP3 when this option is selected.

3 Click OK.

Note: The Transcoder options are available on specific models only.

Synology DiskStation User's Guide

Based on DSM 4.1

122 Chapter 13: Play Music with Audio Station

Download Music You can enable music download and then download songs from Audio Station to your local computer.

To enable music download: 1 Click Settings and then click the Options tab.

2 Tick Enable music download.

3 Click OK.

To download music, do any of the following: Select multiple songs by holding Ctrl key and right-click to choose Download selected song(s). Right-click any of the songs in the queue panel, and choose Download playing queue. Right-click any playlist and choose Download playlist.

123

Chapter

14 Chapter 14: Organize Videos and Record TV Programs with Video Station

Video Station allows you to organize your collection of movies, TV shows, and home videos into a media platform on which you can watch and play video clips, live stream and record digital TV programs with a USB DTV dongle (sold separately) plugged into your DiskStation, view and edit video metadata whose information is retrieved automatically from the Internet.

With Video Station, you can also stream videos to your iPhone or iPad for playback.

This chapter explains how to install Video Station, categorize videos by video type, edit video metadata, record and live stream digital TV programs for playback.

Install Video Station Go to Main Menu > Package Center to install Video Station.

To install Video Station: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it.

Synology DiskStation User's Guide

Based on DSM 4.1

124 Chapter 14: Organize Videos and Record TV Programs with Video Station

To launch Video Station: Go to Main Menu and click Video Station. Type the following web address in the address bar of your web browser:

http://Synology_Server_IP_Address/video/

To connect via mobile devices: You can download DS video from Apple's App Store to play videos in Video Station with your iOS device. For more information about DS video, see "Chapter 19: Communicate with Mobile Devices" on Page 175.

Categorize Your Videos Video can be categorized into movie, TV show, home video, and TV recording as shown on the left panel of Video Station. You can also manage your video collections by adding them to favorites or watchlist for quick access.

Create Video Folders You as DSM admin or users belonging to the administrators group need to create video folders for movie, TV show, home video, and TV recording first to store your videos before managing files with Video Station.

To create video folders: 1 Select any video tab on the left panel, and go to Settings > Video Folder (for movie/TV show/home video) or

Settings > TV Recording (for TV recording).

Note: If this is your first time using Video Station, a prompt will appear taking you to the setup page once the application is launched. Click OK to continue.

Synology DiskStation User's Guide

Based on DSM 4.1

125 Chapter 14: Organize Videos and Record TV Programs with Video Station

2 Depending on which type of video folder you want to create, do the following:

Movie/TV Show/Home Video: Click Create and then Select to choose a folder from your DiskStation.

Note: For Movie/TV Show/Home Video, select which type of video you want to place in the folder. A folder can contain only one video type, but multiple folders can be created to contain videos of the same kind. Once a folder is selected, neither the folder nor its sub-folders can be selected to store any type of video.

TV Recording: In the TV Recording Folder section, click Select to choose a folder from your DiskStation. 3 Click OK.

Re-index Video Files Video files within the specified video folders will be indexed by default, but if files in a folder somehow appear missing, you may need to perform re-index to re-construct the index structure of the files.

You can also re-index the video files to update their metadata periodically.

To re-index video files: 1 Select any video tab on the left panel, and go to Settings > Video Folder.

2 Select the folder whose video files you want to re-index, and do either of the following:

Click Re-index all files to re-index all video files without searching video metadata over the Internet. Click Search all video info again to re-index all video files and search video metadata over the Internet all

over again.

Manage Video Collections You can add videos to the favorites list or watchlist for quick access.

Do either of the following to add videos to the list(s):

Method 1 - Add to favorites/Add to watchlist Movie/Home Video/TV Recording: Select any of the video clips in the main area, and click the Action

drop-down menu. Click Add to favorites or Add to watchlist. TV Show: Click any of the TV shows in the main area. All available episodes and seasons of the TV show

will appear. Select the episode you want or click the episode to enter the single-episode view, click the Action drop-down menu, and click Add to favorites or Add to watchlist.

Method 2 - Add to favorites/Add to watchlist icon Movie/Home Video/TV Recording: Click any of the video clips in the main area to enter the single-video

view. Click the Add to favorites or Add to watchlist icon on the upper-right side. TV Show: Click any of the TV shows in the main area. All available episodes and seasons of the TV show

will appear. Click the episode you want to enter the single-episode mode, and click the Add to favorites or Add to watchlist icon on the upper-right side.

To view your selected videos of Favorites or Watchlist: Go to the Collection tab on the left panel, and click Favorites or Watchlist to see the videos added to the category in question.

Note: For more information about editing video folders and browsing video files, click the Help button (with a question mark) at the top-right corner, and then go to Video Station > Video Category.

Synology DiskStation User's Guide

Based on DSM 4.1

126 Chapter 14: Organize Videos and Record TV Programs with Video Station

Manage Video Metadata DSM admin or users belonging to the administrators group can edit, update, and correct video information as well as view media information.

Edit Video Metadata You can edit video info if you would like to revise the metadata on your own, or if you have found mistakes in the metadata automatically retrieved from the Internet.

You can also take advantage of systems' metadata-loading feature to auto fill in the metadata or modify incorrect video information.

Note: The information auto-fill service is not available for Home Video.

To edit video info and search video metadata from the Internet (not applicable to Home Video and TV Recording) or from existing videos: 1 Go to any video tab on the left panel, and select the video you want to edit.

2 Click the Action drop-down menu, and click Edit video info.

3 In the window that appears, make changes to the information in the text field as needed, or do the following depending on the category you selected:

Movie/TV Show: a Click Search from Internet to have the empty fields auto filled in or erroneous information corrected. b In the window that appears, enter keyword(s) of the video title, TV show season or episode number in the

corresponding fields, and press Enter or click Search. Video(s) matching the search criteria will appear below.

c Browse through the search result, select one correct item from the list, and click Apply. The metadata of the selected video will be applied to the fields at the Video Info tab.

d Click OK to save the changes, or click Reset to restore the original data if you have found the applied metadata is not the one you are looking for, and make another search with the Search from Internet button again.

Movie/TV Show/Home Video: Click Select from existing videos and all videos of the concerning category stored in your video folder will be displayed. Follow the step a-d above to continue.

4 Under the Poster tab, if the original poster image is not the one you are looking for (For Home Video, the poster would be the video thumbnail), simply type in the web address at which your desired image can be found at the URL field. The image will be loaded to replace the original one.

5 Click OK to save the changes.

Update Video Metadata In addition to updating video metadata with the instructions given in Edit Video Metadata above, you can also have an online-update for movie and TV show info directly from the Action drop-down menu.

Please note this method is applicable to Movie and TV Show only.

To update video info online: 1 Click Movie or TV show on the left panel, and select any movie or TV show episode whose video info you

want to update over the Internet.

2 Depending on the category you have chosen, do the following:

Movie: Click the Action drop-down menu and select Update movie info online. TV Show: Click the Action drop-down menu and select Update TV show info online.

3 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

127 Chapter 14: Organize Videos and Record TV Programs with Video Station

Note

If the lock status of the selected video's video info is locked, updating the video info will switch its status to Unlock, which means that the metadata of the video will be updated over the Internet.

For more information about editing, updating, and correcting video info, click the Help button (with a question mark) at the top-right corner, and then go to Video Station > Video Metadata.

View Media Info You can view media info by selecting any video, clicking the Action drop-down menu and clicking View media info.

Record TV Programs You can record digital TV programs with a USB DTV dongle (sold separately) plugged into your DiskStation. For the complete list of supported DTV dongles, please visit Synology's website.

Channel Scan A complete channel scan is required before you start to record TV programs.

To perform a channel scan: 1 Go to the TV Recording tab, and click Channel Scan.

2 In the window that appears, select both your country and region (if applicable), and click Scan to start.

Note: You cannot scan channels for a place where you are not located.

3 A progress bar will appear in the middle of the window indicating the percentage of completion of the scan. It may take a while for the scan to finish.

TV Programs Once the channel scan is complete, you can choose to stream or record channels available on the channel list on the left panel at Schedule > Program Guide according to your preference.

Programs of different modes are indicated by the following icons/colors:

Blue: Programs highlighted in blue have been scheduled to be recorded but the recording has not started yet. Red: Programs with a red circular icon are being recorded now. Green: Programs with a green play icon are being streamed and watched. Gray: Programs grayed out have stopped being broadcast and cannot be selected to stream or record.

To record programs: 1 Click the TV Recording tab, and go to Schedule > Program Guide.

2 Select a channel from the channel list on the left panel, and scroll down or up in the main area to browse through available programs of the selected channel.

3 Select the program(s) you want to record, and do either of the following:

Click Record > Add to recording schedule. Press and hold Ctrl or Shift for multiple selections. The selected programs will appear under the Recording Schedule tab.

Click Record > Set up repeat schedule. In the window that appears, tailor the repetitive recording schedule for the program to your needs.

4 Click OK to apply your settings.

Note: A program whose broadcast time conflicts with another cannot be selected for recording. Only one program can be scheduled for recording during a time slot.

Synology DiskStation User's Guide

Based on DSM 4.1

128 Chapter 14: Organize Videos and Record TV Programs with Video Station

Recording Settings Recording settings can be configured with the option to enable or disable priority of TV program recording over live streaming. You can also specify how long you want to capture prior to/after record start/end.

To manage recording settings: 1 Click the TV Recording tab, and go to Settings > TV Recording.

2 In the Recording Setting section, do either of the following

If you want to record and live stream the same digital TV program at the same time, whether Make TV recording take priority over live streaming is ticked or not makes no difference, because recording and streaming can be performed concurrently when it comes to the same TV program.

If you want to record one TV program and live stream another, do either of the following: If you want to stop streaming a program when recording schedule of another program starts, tick the

checkbox. If you do not want the streaming of a program to be interrupted by another program when its recording

schedule starts, do not tick the checkbox. 3 Specify how long you want to record before and/or after the recording of the program starts and/or ends in the

fields.

4 Click OK.

Note:

If you scan channels again after the first scan is completed, the streaming service, existing channel list, and all recording schedules, both ongoing and to-come, will be canceled. Please proceed with caution.

If one of the users with administrative privileges is scanning channels, you are not allowed to stream or record any programs. Please wait until the scan process is finished.

Live Stream TV Programs Once the channel scan is completed, you can watch digital TV programs broadcast live with the streaming service provided by Video Station.

Note: For better video transmission and viewing quality, it is recommended you install VLC media player for video playback. Please make sure you have installed VLC Player (Windows, Linux) on your local computer. For detailed information about video playback, click the Help button (with a question mark) at the top-right corner, and then go to File Station > Read and Move Files > View Documents, Photos, or Videos.

Streaming Settings You as DSM admin or users belonging to the administrators group can choose whether authentication is required when other users are streaming TV programs for playback. You can also restrict the number of viewers streaming TV programs.

To enable authentication for live streaming service: 1 Click the TV Recording tab, and go to Settings > TV Recording.

2 In the Live Stream section, tick Enable authentication for live streaming service, and enter user credentials which other users will be requested to provide in the fields.

3 Click OK.

To enable viewer limit: 1 Click the TV Recording tab, and go to Settings > TV Recording.

2 In the Live Stream section, tick Limit the total number of people for TV live streaming, and specify a number in the text field.

3 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

129 Chapter 14: Organize Videos and Record TV Programs with Video Station

Live Streaming Before live stream digital TV programs for playback, please make sure you have installed VLC media player on your local computer.

To live stream digital TV programs: 1 Click the TV Recording tab, and go to Schedule > Program Guide.

2 Select a channel whose program you want to stream from the channel list on the left panel, click the program which is currently broadcasting in the main area, and click Live Stream.

3 A pop-up window will appear asking you to click the Live Stream icon at the top-right corner to open the streaming URL. Click OK and Close to close the Schedule window, or you will not be able to continue.

4 Click the Live Stream icon as instructed. In the window that appears, copy and paste the Streaming URL to VLC player for playback. You may be required to enter user credentials for authentication when launching the streaming service.

Note: DSM admin or users belonging to the administrators group can configure port forwarding rules by specifying the destination port as 9006 for DiskStation users, allowing them to access your DiskStation over the Internet. For more information about port forwarding, open DSM Help and then go to Control Panel > Network Services > Router Configuration.

130

Chapter

15 Chapter 15: Download Files with Download Station

Download Station is a web-based download application, allowing you to download files from the Internet through BT, FTP, HTTP, NZB and eMule, and automatically unzip compressed downloaded files to Synology DiskStation. With Download Station, you can download files from file hosting sites, and search for torrent files via system default search engines as well as self-added ones with the BT search function.

This chapter explains how to install Download Station, manage Auto Extract service and download tasks.

Install Download Station Go to Main Menu > Package Center to install Download Station.

To install Download Station: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it.

To launch Download Station: Go to Main Menu and click Download Station. Type the following web address in the address bar of your web browser:

http://Synology_Server_IP_Address/download/

Synology DiskStation User's Guide

Based on DSM 4.1

131 Chapter 15: Download Files with Download Station

To go to the BT/HTTP/FTP/NZB or eMule section of Download Station: After launching Download Station, click the BT/HTTP/FTP/NZB or eMule tab at the bottom of Download Station.

To connect via mobile devices: You can download DS download from Apple's App Store to manage your download files in Download Station with your iOS device. For more information about DS download, see "Chapter 19: Communicate with Mobile Devices" on Page 175.

Manage Auto Extract Service Auto Extract service optimizes download task by unzipping downloaded archives automatically to your specified location. Password can be created to extract compressed files if needed.

Click the Auto Extract tab on the left side to manage following settings for Auto Extract.

Note: Supported compressed file formats: .zip, .tar, .gz, .tgz, .rar, .7z

Service Setting DSM admin or users belonging to the administrators group can enable Auto Extract service for DiskStation users to decompress files automatically.

To enable Auto Extract service: Tick Enable Auto Extract service for DiskStation users to extract archives automatically, and click OK.

Auto Extract You can manage the Auto Extract settings for downloaded archives here.

To enable Auto Extract for downloaded files: 1 Tick Enable Auto Extract for downloaded files to enable the service first if you want automatic extraction for

downloaded files. Otherwise, the other settings will not be available.

2 Select a location for uncompressed files from either of the following:

Extract to current location: Where the zipped archive is currently downloaded. Extract to: Any other folders on your DiskStation.

To manage the Auto Extract settings, do the following: Create subfolders for extracted files: Tick the checkbox if you want the compressed files to be stored in a

subfolder of the folder in which the zipped archive is downloaded. Overwrite existing files: Tick the checkbox if you want to overwrite files with the same file name within a

folder. If it is not ticked, the extracted files with the same name will be skipped. Delete archives upon extract completion: Tick the checkbox if you want to delete the downloaded archive

once extracting is finished.

Password List You can manage passwords used to extract archives by adding, editing, and deleting. The passwords listed will be automatically retrieved and applied to corresponding downloaded archives whenever required.

To manage the password list: 1 Click Password List. 2 In the window that appears, create, revise, or remove a password accordingly.

3 Click OK to save the changes.

Note:

One password can contain up to 1024 characters at most. The maximum number of passwords for the list is 30 entries.

Synology DiskStation User's Guide

Based on DSM 4.1

132 Chapter 15: Download Files with Download Station

Set up BT/HTTP/FTP/NZB Click the BT/HTTP/FTP/NZB tab at the bottom of Download Station, and click the gear icon next to the search field at the top to manage the following settings of BT/HTTP/FTP/NZB.

Note: For detailed information about BT/HTTP/FTP/NZB settings, open DSM Help and then go to Download Station > BT/HTTP/FTP/NZB > Set up BT/HTTP/FTP/NZB.

General In this section, you can set download schedule, prioritize process order, and enable notification.

Download Schedule You can limit BT/HTTP/FTP/NZB's download tasks to certain time period of a week and alternative speeds, so that you can free up more network bandwidth when needed.

To set the download schedule: 1 Choose any of the following:

Immediately: Allow download tasks to continue without stop. Advanced schedule: Click Schedule Plan and do the following: a If you want to limit download tasks to alternative speeds during certain periods of a week, enter the

maximum download or upload rates in the BT Alternative Speed Settings section. ("0" means unlimited.)

b Choose any of the following and click on the grid to limit download tasks' time or speeds to certain period of a week:

a No Download: Do not download or upload files. b Default Speed: Download or upload files at the default maximum speeds. c Alternative Speed: Download or upload files at the maximum speeds you specified in the BT Alternative

Speed Settings section. 2 Click OK.

Note: Downloading or uploading files at alternative speeds is available for BT tasks only.

Synology DiskStation User's Guide

Based on DSM 4.1

133 Chapter 15: Download Files with Download Station

Process Order Do the following to sort the order of download tasks:

1 Choose any of the following:

By date created: Sort the order of download tasks by the date they are added. By user (one task at a time): Sort the order of download tasks by the users who added the download tasks.

2 Click OK.

Note: Choosing By user can improve the fairness among users, so it is recommended when more than one user are downloading files.

Notification You can have Download Station send email or desktop notifications when a task is completed.

Before you start: For the setting to take effect, you must go to Main Menu > Control Panel > Notification and enter the SMTP settings.

To enable email notification: 1 Tick Send email notification upon task completion.

2 Click OK.

To enable desktop notification: 1 Tick Display desktop notification upon task completion.

2 Click OK.

Location In this section, you can specify download destination folder and torrent/NZB watched folder.

Default Destination Folder Specify a folder that will be used to store files downloaded via BT/HTTP/FTP/NZB.

To specify the default destination folder: 1 Click Select and choose a folder.

2 Click Select. 3 Click OK.

Torrent/NZB Watched Folder Specify a watched folder which will be monitored by Download Station to create download tasks automatically for any torrent/NZB files within that folder.

To specify a watched folder: 1 Tick Load torrent/NZB file(s) from watched folder automatically.

2 If you want to delete torrent/NZB files after download tasks have been created for those files, tick Delete loaded torrent/NZB files.

3 Click Select and choose a folder.

4 Click Select. 5 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

134 Chapter 15: Download Files with Download Station

File Hosting There are many online file hosting and media sharing websites, where users can upload and share the files or multimedia contents with other people. With Download Station, you can download files from those websites. For more information about downloading files from those websites with your premium or free membership information, click the Help button (with a question mark) at the top-right corner, go to Download Station > Set up BT/HTTP/FTP/NZB, and refer to the File Hosting section.

BT In this section, you can edit the following settings for downloading BT files.

To specify the TCP port number: Enter 6881 at the TCP Port field. By default, the port is 6881. It can also be set from 1 to 65535 manually by the administrator.

Note: You cannot use the following port number for BT access, because they are reserved for system use:

Port Number: 20, 21, 22, 23, 25, 80, 110, 137, 138, 139, 143, 199, 443, 445, 515, 543, 548, 587, 873, 993, 995, 3306, 3689, 5000, 5001, 5005, 5006, 5335, 5432, 9997, 9998, 9999

FTP default port range: The actual range may vary depending on different models.

To set up BT upload and download rates: Enter the maximum upload and download rate for BT downloads and uploads in the Max. upload rate or Max. download rate fields. ("0" means unlimited.)

BT Network Setting See below for more advanced BT settings.

To encrypt BT traffic: 1 Choose any of the following from the BT protocol encryption drop-down menu:

Disable: Disable outgoing encrypted connections, but will accept incoming encrypted connections. Auto: Attempt to accept incoming encrypted connections, but will fall back to an unencrypted mode if

connection fails. Always: Always accept incoming encrypted connections and use outgoing encrypted connections.

2 Click OK.

To set maximum number of peers for each BT task: 1 Enter a number in the Max. peers allowed per torrent file field. ("Peers" are BT clients currently sharing the

same files over the network.)

2 Click OK.

To enable DHT for BT network: 1 Tick Enable DHT network, and then change the default DHT UDP port setting if necessary.

2 Click OK.

Auto Stop Task The BT download task will continue seeding even when the task is finished. This setting allows you modify the share ratio and seeding interval for the download task.

Note: Download Station will stop tasks when both criteria are met.

BT Search In this section, you can see a list of default BT search engines. When you use the BT Search function to search for torrent files, Download Station will list search results provided by these search engines.

You can also click Add and upload a BT search engine plug-in to add your favorite BT search engines to the list.

Synology DiskStation User's Guide

Based on DSM 4.1

135 Chapter 15: Download Files with Download Station

FTP / HTTP In this section, you can set the number of simultaneous connections to one FTP server, and limit the maximum download rate of each FTP task.

NZB Download Station allows you to download files via a news server. The news server information must be assigned before downloading NZB files.

The maximum connections is usually limited by your news server, you can also limit maximum connections to each NZB task by giving it a value.

RSS For RSS download tasks, you can choose from the Update interval drop-down menu to shorten the update interval from 24 hours to your preferred time period.

Create BT/HTTP/FTP/NZB Download Tasks This section explains how to create BT/HTTP/FTP/NZB tasks.

Create by Uploading Files You can create download tasks by uploading the following files from your local computer to Download Station:

Torrent files (.torrent) contain information for downloading files being shared over the BT network. NZB files (.nzb) contain information for retrieving posts from news servers. URL files (.txt) contain a list of HTTP/FTP URLs for downloading the linked files.

To create download tasks by uploading files: 1 Do any of the following:

Click the Create button, click the button next to Open a file, and browse to the files for upload. (If you have installed Flash Player 9 or later, you can make multiple selections.)

Synology DiskStation User's Guide

Based on DSM 4.1

136 Chapter 15: Download Files with Download Station

Select the files on your computer's desktop or file explorer (for example, Windows Explorer or Mac Finder), and then drag and drop them into Download Station.

2 Change your download destination, or tick the checkbox to show BT information (for ".torrent" files only) according to your preferences.

3 Click Create.

Note:

You can upload up to 20 files at a time. Drag-n-drop files from computer's desktop or file explorer is supported on specific browsers only: Chrome, Firefox

4 or onwards

Create by Entering URLs You can create download tasks by entering URLs.

To create download tasks by entering URLs: 1 Click Add.

2 In the window that appears, enter the URLs of the file you want to download. You can enter up to 50 URLs in the box.

Note:

If you want to download a FTP folder, simply enter the FTP link with the forward slash (/) at the end of the link. All of the files and sub-directories in the folder will be downloaded.

SFTP/FTPS folder downloading is not supported.

3 If authentication is required, tick Authentication required and enter your username and password.

4 If you want to change your download destination, click Select to select another folder.

5 Click Create.

Create via BT Search You can search for torrent files with BT search engines to help you find your favorite downloads more easily.

Note: Before you use the Search function, make sure you have enabled at least one search engine at Settings > BT Search. See "BT Search" on Page 134 for more information.

To create download tasks via BT search: 1 Enter a keyword in the search field at the top-left corner of BT/HTTP/FTP/NZB, and press "Enter" on your

keyboard to start searching.

2 Click Search on the left panel. The search result of available files will be listed in the main area.

3 Make your selections, and then click any of the following buttons to create download tasks:

Download immediately: Download the selected files to the default destination folder you specified at Settings > Location. See "Location" on Page 133 for more information.

Download to: Change destination folder and modifies the torrent file's URL or authentication (if required). Click Create to create the download task.

Synology DiskStation User's Guide

Based on DSM 4.1

137 Chapter 15: Download Files with Download Station

Create Download Tasks for RSS Feeds You can use Download Station to download RSS feeds.

More Information

What is RSS? RSS (Really Simple Syndication, also known as RSS feed) is an alternative way of web browsing. Web publishers often use RSS feeds to publish frequently-updated works, such as blog entries, news headlines, podcasts, photo albums, or audio/video clips.

Can Download Station download all kinds of RSS feeds? RSS files on the website of BT search engines and iTunes podcasts are generally supported by Download Station.

Some download links in the RSS file are links to a web page rather than the actual file. This kind of RSS files will not be supported. To view and update their RSS feeds, you can use a RSS reader (such as Google Reader) instead.

To view and update the list of RSS feeds: 1 Right-click the RSS icon on a webpage to copy the URL of the RSS file.

2 Launch Download Station and click RSS Feeds on the left panel. You can see the file list in the main area.

3 Click the Add button above the file list.

4 In the window that appears, paste the URL into the text field and click OK. (If you tick Automatically download all items, Download Station will automatically add all RSS feeds listed in the RSS file to download tasks.) The RSS file is now added to the file list. You can rename or remove the RSS file by clicking the Rename or Remove button above the file list.

5 Select the RSS file and view the list of its RSS feeds under the RSS Feeds tab.

6 Click Update above the file list to update the list of RSS feeds for the selected RSS file, or click Update All to update the lists of RSS feeds for all RSS files in the file list.

Note: By default, Download Station automatically updates the lists of RSS feeds on a daily basis. You can go to Settings > RSS to shorten the update interval.

To create download tasks by selecting RSS feeds: 1 Click RSS Feeds on the left panel, and then select the RSS file containing feeds you want to download.

2 From the list of RSS feeds under the RSS Feeds tab, select the feeds you want to download.

3 Click the Download button below the RSS Feeds tab to create download tasks for the selected RSS feeds.

To create download tasks by setting download filter: 1 Click RSS Feeds on the left panel, and then select the RSS file containing feeds you want to download.

2 Under the Download Filter tab, click Add.

3 In the window that appears, enter the following information and click OK to create a filter:

Name: The name of the filter Matches: The keyword for searching RSS feeds with matching names Does not match: The keyword for excluding RSS feeds with matching names Destination: The destination folder for the downloaded RSS feeds

4 You will see the new filter under the Download Filter tab. Click Edit or Delete if you want to edit or delete the filter.

5 When the list of RSS feeds is updated, Download Station will automatically create download tasks for newly- added RSS feeds matching the criteria set in Download Filter.

Synology DiskStation User's Guide

Based on DSM 4.1

138 Chapter 15: Download Files with Download Station

Note:

If you leave Matches and Does not match blank, Download Station will create download tasks for all newly-added RSS feeds.

Download Filter only works for newly-added feeds. Original RSS feeds on the list can only be downloaded using the Download button below the RSS Feeds tab.

Manage BT/HTTP/FTP/NZB Download Tasks You can check and manage the download tasks you just created.

View BT/HTTP/FTP/NZB Tasks Click any of the following on the left panel to view BT/HTTP/FTP/NZB tasks:

All Downloads lists all download tasks. Downloading lists download tasks that are currently downloading. Completed lists download tasks that are completely downloaded. Active Downloads lists download tasks that are currently downloading or seeding. Inactive Downloads lists download tasks that are erroneous, waiting, or paused by you. Stopped lists download tasks that are paused by you.

Manage BT/HTTP/FTP/NZB Tasks While checking BT/HTTP/FTP/NZB tasks, you can use the buttons along the top of download queue and the tabs below the queue to manage your tasks.

To pause/resume/remove download tasks: 1 Select the download task(s) you want to pause, resume, or remove.

2 Click Pause or Resume or Remove.

To end an incomplete or erroneous download task: 1 Select the download task you want to end.

Synology DiskStation User's Guide

Based on DSM 4.1

139 Chapter 15: Download Files with Download Station

2 Click End incomplete or erroneous download tasks.

3 Click OK to end the task and the files will be moved to your destination shared folder.

Warning: You cannot resume/restart the task after completing this action.

To edit download tasks: 1 Click Edit to customize the general settings (auto stop task, maximum upload/download rate, maximum peers

allowed per torrent file) and tracker lists for the current task.

2 Click OK.

Note:

To edit the default setting for all download tasks, refer to "Set up BT/HTTP/FTP/NZB" on Page 132. The maximum upload/download rates and the maximum peers allowed per torrent file cannot exceed the default

setting.

To clear finished download tasks: Click Clear completed items. Downloaded files will remain in the destination shared folder.

To change the list order of download tasks: Click on the column headings. Default ordering is by the creation date of the download tasks.

To view detailed information about a download task: 1 Select the download task you want to view.

2 Click any of the following tabs below the download queue to view detailed information of the task. (If you cannot see the tabs, click the upward triangle at the bottom right corner of Download Station.)

General displays general information of the download task. Tracker (BT tasks only) lists servers that track other BT clients sharing the same files over the network. You

can add or remove trackers by clicking Add or Remove. Peers (BT tasks only) lists other BT clients sharing the same files over the network. File (BT/NZB tasks only) lists files to download for the current task. For BT tasks, you can set download

priority for each file or skip downloading certain files. Log (NZB tasks only) records the download progress of files.

Troubleshooting When error(s) occur, all action buttons will be disabled. You can enable the action buttons by checking for the possible errors:

Download Station is disabled. The network is down. Download destination not set. Your account is disabled or removed. Unknown Error. If the problem still exists after checking the above list of possible errors, consult the Administrator.

Set up eMule eMule downloading is not enabled by default. You will need to enable eMule before configuring its settings.

To enable eMule: 1 Click the gear icon next to the search field at the top of Download Station. Go to Download Station > General

on the left panel, and then tick Enable eMule downloads.

2 If there are multiple volumes on your DiskStation, you can choose from the drop-down menu to specify the temporary location for storing the files that are being downloaded.

Synology DiskStation User's Guide

Based on DSM 4.1

140 Chapter 15: Download Files with Download Station

3 Click OK.

Now you can click the eMule tab at the bottom-left corner of Download Station, and then click the gear icon next to the search field at the top of Download Station to manage the following settings of eMule.

Note: For detailed information about eMule settings, open DSM Help and then go to Download Station > eMule > Set up eMule.

General In this section, you can manage the settings of ED2K server, notification, and protocol obfuscation.

Server You can manage server settings with the options to update server list or/and connect to server automatically.

To manage server settings: 1 Tick any of the following:

Automatically update server list when connected to a server or client allows you to retrieve server lists from other servers or eMule clients.

Connect to server automatically allows Download Station to connect to ED2K server automatically. 2 Click OK.

Note: See "Connect to ED2K Server/Kad" on Page 142 for more information about ED2K servers.

Notifications You can have Download Station send email or desktop notifications when a task is completed.

Before you start: For the setting to take effect, you must go to Main Menu > Control Panel > Notification and enter the SMTP settings.

To enable email notification: 1 Tick Send email notification upon task completion.

2 Click OK.

Synology DiskStation User's Guide

Based on DSM 4.1

141 Chapter 15: Download Files with Download Station

To enable desktop notification: 1 Tick Display desktop notification upon task completion.

2 Click OK.

Protocol Obfuscation When this function is enabled, the server will accept incoming connections that is using protocol obfuscation. Administrators can also choose to use obfuscation for outgoing connections or only accept obfuscated connections.

Connection In this section, you can set up connection for eMule downloads.

Port By default, the eMule TCP port is 4662 and the UDP port is 4672. It can also be set from 1 to 65535.

Note: The TCP port should exclude the following ports:

Port Number: 20, 21, 22, 23, 25, 80, 110, 137, 138, 139, 143, 199, 443, 445, 515, 543, 548, 587, 873, 993, 995, 3306, 3689, 5000, 5001, 5005, 5006, 5335, 5432, 6881, 8080, 7000, 7001, 8081, 9997, 9998, 9999, 50001, 50002

FTP default port range: The actual range may vary depending on different models.

Connection When this function is enabled, the server will limit the maximum TCP/IP and UDP connections. A connection will be established only when there are tasks in progress such as: data transferring, file searching or source exchanging.

Note: The max. connections should be between 100 and 500. A large number of max. connections will consume more system resources and a small number of min. connections will lower the overall downloading performance.

Location In this section, you can set the default destination folder for eMule, and share your files on the ED2K network.

To set the download destination folder for eMule: 1 Click Select and choose a folder.

2 Click Select. 3 Click OK.

To specify folders you want to share with other eMule clients: 1 Click Select and choose a folder.

2 Click Select. 3 Click OK.

Bandwidth In this section, you can set upload and download rates and download schedule to limit download and upload bandwidths.

To set upload and download rates: Enter the maximum upload and download rate for eMule downloads and uploads. ("0" means unlimited.)

To set the download schedule: Like BT/HTTP/FTP/NZBs download schedule, eMules download schedule is set up in the same manner. See "Download Schedule" on Page 132 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

142 Chapter 15: Download Files with Download Station

Connect to ED2K Server/Kad Click Server/Kad on the left panel to set up Server/Kad. An ED2K server contains information about resources on the ED2K network. To search and download ED2K resources, it is necessary to connect to a server.

To add an ED2K server: 1 Click the Add button.

2 Choose any of the following:

Server IP: Enter the IP address and port of the server. ED2K Link: Enter the ED2K link. (e.g. ed2k://|server|IP|port|/) Update server.met from URL: Enter the URL of the server.met file (e.g.

http://www.synology.com/server.met). 3 Click Add.

To delete ED2K servers: Select the servers from the list and click the Delete button.

To connect to a random ED2K server: 1 Select a server from the server list.

2 Click Connect/Disconnect server. 3 Wait for the server to be connected. When the selected server is full or has an invalid IP address, the system

will randomly connect to an available server.

Synology DiskStation User's Guide

Based on DSM 4.1

143 Chapter 15: Download Files with Download Station

Create eMule Download Tasks This section explains how to create eMule download tasks.

Create by Uploading Files You can create download tasks by uploading a text file (.txt) containing ED2K links from your local computer to Download Station:

To create download tasks by uploading a file: 1 Click Download Queue on the left panel, and then click the Create button.

2 Choose Open a file and click the button to browse to the text file for upload.

3 Click Create.

To resume an eMule download task: 1 Select one or more tasks in the list.

2 Click the Resume button. Only tasks which are not completed or paused will be resume downloading.

Create by Entering URLs You can create download tasks by entering URLs.

To create download tasks by entering URLs: 1 Click Create.

2 In the window that appears, choose Enter URL, and enter the URLs of the file you want to download. You can enter up to 50 URLs in the box.

3 Click Create.

Create via eMule Search Click Search on the left panel to search and download the files your are looking for.

Note: If you want to perform eMule search, make sure you are connected to an ED2K server at Server/Kad. See "Connect to ED2K Server/Kad" on Page 142 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

144 Chapter 15: Download Files with Download Station

To create download tasks via general search: 1 Enter a keyword in the search field at the top-left corner of eMule, select a file type and search method. Press

"Enter" on your keyboard to start searching. Click Start/Stop search to stop searching.

2 The search result of available files will be listed in the main area, and might be shown in the following colors:

Blue: There are sufficient sources available on the network for those files. Red: The file is already in the download queue or in the download destination.

Note: Files already exist in the download queue will not be added to the queue again.

3 Make your selections, and click Download selected file(s) to create download tasks.

To create download tasks via advanced search: 1 Click on the down arrow to the right of the Start/Stop search button.

2 In the window that appears, do the following:

Enter a keyword. Select the file type. Select the search method. Enter the minimum and maximum file size for the desired files. (optional) Enter the number of minimum sources. (optional) Enter the file extension. (optional)

3 Click Start/Stop search to start searching. Click the button again to stop searching.

4 Make your selections, and click Download selected file(s) to create download tasks.

To clear search results: Click Clear search results to clear the search result.

Manage eMule Download Tasks You can check the download tasks you just created, and manage the tasks with eMule.

Synology DiskStation User's Guide

Based on DSM 4.1

145 Chapter 15: Download Files with Download Station

Manage Download Queue Click Download Queue on the left panel to manage the download tasks.

To pause/resume/remove download tasks: 1 Select the download task(s) you want to pause, resume, or remove.

2 Click Pause or Resume or Remove.

To view detailed information about a download task: 1 Select the download task you want to view.

2 Click the tabs below the download queue to view detailed information of the task.

To edit download tasks: 1 Click Edit to edit the priority and change destination folder for the task.

Note: To change the default destination folders for all download tasks, see "Location" on Page 133.

2 Click OK.

To clear finished download tasks: Click Clear. Downloaded files will remain in the destination shared folder.

Check Upload Queue Click Uploading on the left panel to check your shared files currently uploaded to other eMule clients.

Note: To specify folders you want to share with other eMule clients, see "Location" on Page 141.

146

Chapter

16 Chapter 16: Safeguard Your Environment with Surveillance Station

Surveillance Station is professional Network Video Recording (NVR) software bundled with DiskStation Manager (DSM), allowing you to remotely record and monitor video footage from IP cameras which are paired with your DiskStation, watch live view videos, set up scheduled recording, playback recorded events via web browser or mobile device for remote monitoring so as to safeguard your home or office environment.

With Surveillance Station, you can set up VisualStation within LAN to live view managed cameras without the help of a PC.

This chapter explains how to install Surveillance Station, manage IP cameras, watch and record live view videos, set up scheduled recording, playback recorded events, and use all the other comprehensive features provided by Surveillance Station.

Install Surveillance Station Go to Main Menu > Package Center to install Surveillance Station.

To install Surveillance Station: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it. Moreover, the surveillance shared folder will be created automatically to contain your Surveillance Station data. The shared folder is read-only and can be accessed only by admin or a user belonging to the administrators group.

To launch Surveillance Station, do either of the following: Go to Main Menu and click Surveillance Station. Type Synology DiskStation's IP address or server name or domain name plus a colon and the customized port

number (e.g. http://ericawang.dyndns.org:9900) in the address bar of your web browser. Press Enter (Windows) or Return (Mac) on your keyboard.

Synology DiskStation User's Guide

Based on DSM 4.1

147 Chapter 16: Safeguard Your Environment with Surveillance Station

Surveillance Station will be launched in a new browser window.

To connect via mobile devices: You can download DS cam from Apple's App Store or Android Market to live view your IP cameras and play recorded events from Surveillance Station with your iOS/Android device. For more information about DS cam, see "Chapter 19: Communicate with Mobile Devices" on Page 175.

Enhance Mac Compatibility Before watching events or live views with Mac Safari, do the following to make sure your browser settings are appropriate:

1 Make sure your Safari is updated to version 5.1 or onward.

2 Go to Apple menu > Software Update and check for any possible Java updates to make sure your Java applet is up-to-date.

3 Go to Applications > Utilities, and then open Java Preferences to do the following:

On the list of Java applications, make sure the version of Java SE is 1.6.0_26 or onward. Move the 32-bit version of Java SE to the top of the application list (above 64-bit).

If you are using Mac OS X 10.7 or onward, tick Enable applet plug-in and Web Start applications.

Manage IP Cameras Go to Camera > Camera List under Management to add and edit cameras, set up recording schedule, and set up the advanced settings: Motion Detection, Liveview Analytics, Camera Optimization, Patrol Settings, Fisheye Dewarping.

To organize multiple cameras into camera groups for easier deployment, go to Camera > Camera Group. For detailed instructions, click the figure icon at the top-right corner and then click Help.

Note: If you are not DSM admin or users belonging to the administrators group, you may have limited access due to the privilege settings. To learn more about this, go to Assign Privileges on Page 155 or contact your administrator.

Synology DiskStation User's Guide

Based on DSM 4.1

148 Chapter 16: Safeguard Your Environment with Surveillance Station

Watch Live View In the Live View page, you can watch live feeds up to 49 channels, take snapshot and adjust camera angle via PTZ (Pan/Tilt/Zoom), e-map, manual recording, video analytics, or analytics history. You can also customize your own channel layout to fit your different surveillance scenarios and deployment.

Liveview Analytics lets you track targets during live viewing and recording. You can choose from several analytic types for your IP cameras, and track suspicious events intelligently to trigger smart recording on-the-fly. Each recorded session is archived in an organized fashion for analysis. A simulation mode ensures accurate tuning so you can adjust sensitivity, detection zone, and object size to deliver the best result for individual cameras.

For detailed instructions, click the figure icon at the top-right corner and then click Help.

Configure Layout DSM admin (or a user belonging to the administrators group) and users with the manager privilege can configure layout setting. To customize the layout of camera live views and apply an e-map to for specific layout, click the Configure button.

For more information, click the figure icon at the top-right corner, click Help, go to Live View > Monitor Live Views, and refer to the Layout Management section.

Synology DiskStation User's Guide

Based on DSM 4.1

149 Chapter 16: Safeguard Your Environment with Surveillance Station

Use PTZ Control If your camera has PTZ (pan/tilt/zoom) support, you can select a camera and use the Controller panel to adjust the camera's direction. Clicking on the home button will restore the camera back to its original position. If you have selected a camera with partial PTZ support, the unsupported functions on the Controller panel will be grayed out.

Use Other Functions On the Live View page, you can also use the following functions.

1 To digitally zoom in and out, drag the zoom bar or place the mouse over the live view of a selected camera and then scroll the mouse. You can also zoom digitally by using the scroll button on your mouse, and move by dragging the picture.

2 To adjust volume, drag the volume bar.

3 To pause or resume the playback, click this button.

4 To save the current image, click Snapshot. 5 To start manual recording, click Manual Recording.

6 To configure layout setting, click Configure.

7 Click Show information, and the status for each camera will be displayed on the corner of each live view window.

8 To see the corresponding E-Map, click E-Map.

9 To see the live view in full screen mode, click Full screen.

10 Click Toggle to enable Liveview Analytics on the cameras you want for live viewing.

Note: Only cameras whose Liveview Analytics settings have been configured at Camera List > Advanced > Liveview Analytics under the Management tab can be enabled here. For detailed instructions on Liveview Analytics settings, click the figure icon at the top-right corner and then click Help.

11 To playback and see the frequency of Liveview Analytics events, click Analytics History.

12 To see the corresponding preset or patrol, click the Preset Position or Patrol list.

Note: Non-Internet Explorer browsers support limited functions only.

1

2 3 4 5

6

7 8 9

10

11

12

Synology DiskStation User's Guide

Based on DSM 4.1

150 Chapter 16: Safeguard Your Environment with Surveillance Station

Work with Timeline Surveillance Station allows you to locate the actual recorded footage via Timeline and calendar support. The calendar lets you pick any date to show the days recording. Using Event Timeline, you can easily identify events recorded in different modes, labeled by color on the timeline.

During an event playback, you can activate Smart Search to track down suspicious targets. Smart Search is an intelligent feature that helps you analyze past event effectively and eliminate any potential false alarms. For more information about Timeline playback, click the figure icon at the top-right corner and then click Help.

Play Events with Timeline Click the Timeline tab to see the timeline page, which offers the Multiple-Event Playback function, which allows you to simultaneously watch events recorded on one day or at the same time by different cameras. All event videos are lined up in the timeline. You can easily find the event you are looking by clicking a specific time on this day or during the hour, and play it with the event player on this page. For more information, click the figure icon at the top-right corner and then click Help.

Search for Specific Situations with Smart Search Click the search icon at the bottom-left corner of the timeline page to enter the Smart Search mode. With Smart Search, you can search events for specific situations such as general movement or missing/foreign objects on the screen. If the camera lens was occluded or lost its focus by people trying to avoid surveillance, Smart Search can also help you find out when the situations happened. For more information, click the figure icon at the top- right corner and then click Help.

Synology DiskStation User's Guide

Based on DSM 4.1

151 Chapter 16: Safeguard Your Environment with Surveillance Station

Play and Manage Events Under the Management tab, you can go to Event > Event List to browse all recorded events, play them with the Event Player, and delete, lock, filter, or download the video files. For more information about managing events, click the figure icon at the top-right corner and then click Help.

Event Types All recorded events will be here. The events are displayed with the latest ones on top. The images displayed under Mode correspond with the type of recording the event was filmed under.

The gray icon represents Continuous Recording The blue icon represents Manual Recording The green icon represents Motion Detection Recording The orange icon represents Alarm Recording The green/orange icon represents Motion Detection and Alarm Recording

The icon represents the recorded event is being saved right now

Note: Your IP camera must support alarm recording to be able to use Alarm Recording. Alarm recording often relates to the IP cameras digital input and output pin, or DIDO. Refer to its datasheet for pin configuration detail. Alarm recording will begin when the IP camera detects an input pin is triggered.

Export Events Go to Event > Export under Management to export the events. You can export events from Surveillance Station to any shared folder or to an external storage device via USB or eSATA interface. For more information, click the figure icon at the top-right corner and then click Help.

Mount Events Go to Event > Mount under Management to mount exported events. You can mount exported archives onto Surveillance Station. The events in the mounted archive can be played in Event Management and Timeline page. For more information, click the figure icon at the top-right corner and then click Help.

Synology DiskStation User's Guide

Based on DSM 4.1

152 Chapter 16: Safeguard Your Environment with Surveillance Station

Manage Notification Settings Under the Management tab, go to System > Notification to have Surveillance Station send you notification messages to via email, SMS, mobile devices or instant messaging programs whenever important events occur. You can decide which types of events to be notified at System > Notification > Filter and configure notification settings at System > Notification > Settings. For more information about how to enable and set up email, SMS, mobile devices or Windows Live Messenger/Skype notifications, click the figure icon at the top-right corner and then click Help.

Synology DiskStation User's Guide

Based on DSM 4.1

153 Chapter 16: Safeguard Your Environment with Surveillance Station

Use E-Map You can add, edit, and delete e-maps at System > E-Map under Management. For more information, click the figure icon at the top-right corner and then click Help.

After the e-map is created, you can go to Live View and click Configure to assign the e-map to a live view layout. When the setup is complete, you can click the E-Map button on the Live View page to open the map and quickly pinpoint the location of a camera.

Manage Advanced Settings Go to System > Advanced under Management to manage the advanced settings for Surveillance Station.

Synology DiskStation User's Guide

Based on DSM 4.1

154 Chapter 16: Safeguard Your Environment with Surveillance Station

Initial Page Setting You can choose from the drop-down menu to set the initial page after logging in to Surveillance Station.

Centralized Management

Centralized management allows you to set your DiskStation as a host server, and then add multiple DiskStations as clients to form a larger Surveillance network. The host server can serve as the central portal to monitor cameras managed by all clients.

To set your DiskStation as a host server or client: 1 Tick Enable centralized management.

2 Do either of the following:

Choose Be a host server. Choose Be a client, and then set the authentication key. The host server will be required to enter the

correct key to log in and watch live views and events on your DiskStation. 3 Click Save.

To manage client DiskStations (if your DiskStation is set as a host server): Go to Device > Centralized Management under Management. For more information, click the figure icon at the top-right corner and then click Help.

VisualStation VisualStation is a live view and event playback device designed to expand the flexibility of Surveillance Station. When a VisualStation within LAN is managed by your DiskStation, you can connect a TV set or LCD monitor to the VGA port of VisualStation, and then watch live views and events of IP cameras managed by your DiskStation on the TV/LCD screen without using a computer.

To enable VisualStation support: Tick Enable VisualStation and click Save.

Note: This option is only editable by admin (or a user belonging to the administrators group).

To manage available VisualStations within LAN: Go to Device > VisualStation under Management. For detailed instructions, click the figure icon at the top-right corner and then click Help.

Note: A VisualStation can only be managed by a DiskStation within the same LAN.

Synology DiskStation User's Guide

Based on DSM 4.1

155 Chapter 16: Safeguard Your Environment with Surveillance Station

Assign Privileges Go to System > Privilege under Management to manage and assign access privileges to IP cameras for DSM users. For detailed instructions, click the figure icon at the top-right corner and then click Help.

Install Camera License Go to System > License under Management to manage camera license. With Default License, your DiskStation can manage one camera within LAN. If your DiskStation supports multiple cameras, you can purchase Synology Camera License Packs and then add the license key here to manage additional cameras. For more information, click the figure icon at the top-right corner and then click Help.

Synology DiskStation User's Guide

Based on DSM 4.1

156 Chapter 16: Safeguard Your Environment with Surveillance Station

View Log Go to System > Log under Management to view and manage log records of critical events such as camera disconnection or changes on the camera settings. For more information, click the figure icon at the top-right corner and then click Help.

157

Chapter

17 Chapter 17: Manage Media Server and iTunes Service

Synology DiskStation can become a multimedia server on the local area network, allowing computers (using Windows Media Player or iTunes) and DLNA/UPnP home devices (such as stereo system or TV set) to play its multimedia contents.

This chapter explains how to stream multimedia contents from Synology DiskStation to your computer or other DLNA/UPnP home devices.

Install DLNA Media Server Go to Main Menu > Package Center to install Media Server.

To install Media Server: Under the Available tab, click Install to install the package, and follow the installation steps of Manage Packages on Page 97.

When the installation is complete, the package will be moved to the Installed tab and the Main Menu will automatically expand with the packages thumbnail on it.

Manage DLNA Media Server Go to Main Menu > Media Server to browse and play the multimedia contents on Synology DiskStation via DLNA/UPnP home devices, also known as Digital Media Adapter (DMA). With Media Server, you can easily connect those devices such as TV sets and stereo systems to your home network, and stream multimedia files stored on DiskStation to the devices to enjoy music, photos, and videos. More indexed folders can be added for sharing at Media Indexing Service. See "Manage Indexed Folder" on Page 159 for more information.

Synology DiskStation User's Guide

Based on DSM 4.1

158 Chapter 17: Manage Media Server and iTunes Service

Note: You can play the following multimedia file formats on Synology DiskStation with DLNA/UPnP enabled DMA1

Audio: AAC, FLAC, M4A, MP3, Ogg Vorbis, PCM, WAV, WMA, WMA VBR, WMA PRO, WMA Lossless

:

Image: BMP, JPG (jpe, jpeg), GIF, ICO, PNG, PSD, TIF (tiff), UFO, RAW (arw, srf, sr2, dcr, k25, kdc, cr2, crw, nef, mrw, ptx, pef, raf, 3fr, erf, mef, mos, orf, rw2, dng, x3f)

Video: 3GP, 3G2, ASF, AVI, DAT, DivX, DVR-MS, ISO, M2T, M2TS, M4V, MKV, MP4, MPEG1, MPEG2, MPEG4, MTS, MOV, QT, SWF, TP, TRP, TS, VOB, WMV, XviD, RV30, RV40, AC3, AMR, WMA3, RMVB

Playlist: M3U, WPL

Determine the DMA Menu Language and Style You can decide how to organize your multimedia files on the DMA menu by selecting a predefined menu style or customizing your own. The system can save up to three different sets of customized menu styles.

To customize a DMA menu language: 1 Click the DMA menu language drop-down menu, and choose a language from the list.

2 Click Apply.

Note: For users to correctly browse the multimedia files on the server, the codepage and menu language you set should be identical with those of the DMA. For more information about setting the codepage, see "Language" on Page 23.

To customize a DMA menu style: 1 Choose one of the three customized styles, and then click Customize.

2 Click one of the following tabs: Music, Photo, or Video.

3 Do any of the following:

If you want to create a new menu style, click Create. If you have selected Music, there will be a list of templates.

If you want to edit an existing style, click Edit.

Record Diagnostic Log The log can help determine the cause of the problem when you contact Synology Support for assistance.

To manage DMA communication log: 1 Click Diagnose and tick Enable DMA communication log for diagnostic purpose to start recording the log.

2 You can download or clear the recorded log by clicking Download or Clear. 3 Click OK.

Manage Browsing Settings In the Browsing Settings section, you can manage the browsing settings for DMA.

To quickly browse images: Tick Transmit low resolution images instead of the original images.

To change how your music files will be displayed: Select a Music display format from the drop-down menu.

To set album cover (for music files without an embedded image) or video thumbnails: 1 Tick Set images with the below filenames as music/video cover. 2 Enter Filenames such as Cover.jpg, and the image with the same filename under the same folder as the

music files will be displayed as album covers or video thumbnails. The filenames are case sensitive, and the filename listed closest to the front will be used when multiple images are available.

--------- 1 The actual playback capabilities may vary depending on the DLNA/UPnP client.

Synology DiskStation User's Guide

Based on DSM 4.1

159 Chapter 17: Manage Media Server and iTunes Service

To show video's title using embedded information instead of file name: Tick Show video's title using embedded information.

To browse and play the radio stations listed on Audio Station: Tick Enable Internet Radio.

Enhance DMA Compatibility In the DMA Compatibility section, you can enhance DMA compatibility to make sure the multimedia contents on your DiskStation are played smoothly on your DMA devices.

To enable transcoder settings: Tick the following checkboxes to enable transcoders if your DMA does not support the following audio formats: FLAC, APE, AAC, OGG, and AIFF.

To help DMA identify multimedia file formats: Tick Enable customized MIME types and enter the customized MIME types.

More Information

MIME types, also known as Internet media types, can improve the compatibility of multimedia files with DMA by specifying the type and sub-type of media files. You can customize the MIME types to help your DMA device identify the correct file formats.

To manage the list of DMA devices: Click Device list to see the list of DMA devices found by DiskStation. For more information about managing the list of DMA devices, click the Help button (with a question mark) at the top-right corner.

Manage Indexed Folder By default, media files within the photo, video, and music shared folders are indexed by Media Indexing Service. If you want DMA devices and DSM's photo, video, or music applications to access more files on your DiskStation, you can add more indexed folders at Main Menu > Control Panel > Media Indexing Service > Indexed Folder.

To add an indexed folder: 1 Click Create.

2 In the window that appears, give the folder a name that will be seen by DMA devices and DSM applications in the Name field.

3 Click Select, browse to a folder you want to index, and then click OK.

4 In the File Type section, tick the checkboxes to specify which types of media files will be indexed. DMA devices and DSM applications can only browse and play media files that match the specified file types.

5 Click OK and then click Save.

Note:

Remote folders mounted using File Station cannot be added as indexed folders. You can add up to 100 indexed folders on your DiskStation

To edit an indexed folder: 1 Select the folder on the folder list, and then click Edit. 2 Make changes to the settings. (See "To add an indexed folder" for detailed information.)

3 Click OK and then click Save.

To remove folder(s) from the list of indexed folders: 1 Select the folder(s) on the folder list, and then click Delete. (Press and hold Shift or Ctrl while making multiple

selections.)

2 Click Yes and then click Save.

Synology DiskStation User's Guide

Based on DSM 4.1

160 Chapter 17: Manage Media Server and iTunes Service

Note:

Deleting folders doesn't actually remove them from your DiskStation. It only prevents DMA devices and DSM applications from browsing and playing their contents.

You are not allowed to delete the photo, video, and music shared folders from the list of indexed folders.

Play Multimedia Contents with DMA Devices Synology DiskStation can pair up perfectly with Sony PS3, Xbox 360, and many other DMA devices. You can use those devices to browse and stream multimedia contents from your DiskStation to your stereo system and TV set.1

Note: For information about browsing media server's contents with DMA devices, see the documentation that came with your device.

Install iTunes Server Go to Main Menu > Package Center to install iTunes Server.

Manage iTunes Server Go to Main Menu > iTunes Server to use iTunes service. After it is enabled, all iTunes clients on the same local area network can browse and play songs or videos in the music and video shared folders on the server. The server will be listed below Shared in the iTunes window after the service is enabled.

Note: For privacy reasons, iTunes clients are not allowed to view videos in the photo shared folder.

The following formats will be supported by iTunes service: Audio: MP3, M4A, M4P, M4B, WAV, AIFF, AAC, FLAC, APE, OGG, WMA Video: MOV, MP4, M4V Playlist: WPL, M3U

Launch iTunes Server 1 Enter your Shared name.

2 Tick Require password and enter a password if you want iTunes users to enter a password before accessing your shared folders.

3 Click Apply.

--------- 1 For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit www.synology.com.

Synology DiskStation User's Guide

Based on DSM 4.1

161 Chapter 17: Manage Media Server and iTunes Service

Note:

The shared name can contain a maximum of 63 characters. The password for the shared folder can contain a maximum of 255 characters.

Use Smart Playlist Click Smart Playlist to open the Smart Playlist window, where you can create and edit smart playlists on your Synology DiskStation. A smart playlist can automatically include certain types of songs that match specific rules. iTunes clients will be able to play the smart playlist you created.

To create a smart playlist: 1 Click Smart Playlist. 2 Click the Create button, and enter a name for the playlist.

3 Click Add Rule to set rules.

4 After finishing, click OK.

Note: The playlist name can contain a maximum of 255 bytes.

To edit a smart playlist: 1 Double-click on the item you want to edit from the smart playlist table, or select the item and click Edit. 2 Change rules according to your requirement. To add or delete rules, click the Add Rule or Delete Rule button.

3 Click OK.

To delete a smart playlist: 1 Select the smart playlist you want to delete.

2 Click Delete and then click Yes.

Note: You can also create and edit smart playlists with Audio Station. See "Work with Playlist" on Page 118 for more information.

Re-index Media Files Click Re-index at Main Menu > Control Panel > Media Indexing Service to reconstruct the index structure of the audio files if you find missing files while browsing through Synology DiskStation with iTunes. The process will be executed in the background.

For more information about the index function provided by Media Indexing Service, click the Help button (with a question mark) at the top-right corner at Main Menu > Control Panel > Media Indexing Service, or see "Index Multimedia Files for Applications" on Page 171.

162

Chapter

18 Chapter 18: Perform Advanced Management Tasks

Synology DiskStation Manager comes with a variety of management functions, allowing you to check system information, monitor system resources, manage notification services, restore or upgrade DSM, access applications with independent login, index multimedia files for applications and more.

This chapter explains how to comprehend those management functions to make sure your Synology DiskStation is providing the best performance.

Check System Information Go to Main Menu > System Information to check the following system information.

General Under the General tab, you can see the basic information about your DiskStation, including serial number, model name, the amount of physical memory, DSM version, time information, thermal status, or external devices.

The DiskStation's thermal status is represented by green or orange lights:1

Green: Thermal status is normal.

Orange: DiskStation's thermal temperature is high. You need to cool down your DiskStation, or it will shut down to prevent system overheat.

--------- 1 The information is available for specific models only.

Synology DiskStation User's Guide

Based on DSM 4.1

163 Chapter 18: Perform Advanced Management Tasks

The system's general information includes the following: Basic Information: You can see the detailed information about your Synology DiskStation here, including

serial number, model name, memory size, DSM version, system time, operating time, and thermal status. Time: You can see the time setting of your Synology DiskStation here, including time server and time zone. To

set up your time server, see "Set Up Time" on Page 23. External Devices: You can see the model name of your external eSATA or USB devices here.

Network Under the Network tab, you can view the status of network configuration and network interfaces.

The network status includes the following: Basic information: See the basic information of your DiskStations network configuration. [Interface Name]: See the detailed information of the network interface(s) currently configured on your

DiskStation.

Storage Under the Storage tab, you can check the free or used space of your DiskStation volumes and check the status of the hard disks.

To check volume usage: From the pie charts, you can see the free or used space of DiskStation volumes.

Following are the possible status types of an internal hard disk: Normal: System partition and volume are available for use on the hard drive. Initialized: System partition is established, but no volume has been created. Not Initialized: System partition and volume are not established on the hard drive. No Disk Installed: No disk is installed in the corresponding hard drive slot. System Partition Failed: System partition on the hard drive is unavailable. We recommend that you replace

the hard drive. Crashed: Failed to access volume on the hard drive. We recommend that you replace the hard drive.

Note: For the system to function normally, there should be at least one disk in Normal or Initialized status.

Service Under the Service tab, you can see the list of DSM services, which can be enabled or disabled by clicking Enable or Disable under the Action column. The checkmarks under the Status column indicate whether the services are enabled.

Current Connections Under the Current Connections tab, you can manage the list of users who is currently accessing DiskStation resources.

To manage current connections, do any of the following: Click Save to export the current list to an HTML file. Click Refresh to refresh the list. Click Kill connection to stop the user from accessing the resource. The disconnected user has to authorize

again to gain access to the resource. Click Disable user to disable the user. To enable the user again, go to Main Menu > Control Panel > User.

Synology DiskStation User's Guide

Based on DSM 4.1

164 Chapter 18: Perform Advanced Management Tasks

Speed Limit Under the Speed Limit tab, you can view and manage the list of file transfer processes that applied speed limit.

To refresh the list: Click Refresh to reload the page and get the most updated records.

To stop a file transfer process: Click Kill connection to stop the file transfer. You will have to start the file transfer again to complete the process successfully.

View System Logs Go to Main Menu > System Logs to view the log records of DiskStation services. Furthermore, after viewing the log records, you can delete or save them.

To see the log records of a specific service: Click the tabs to view system logs, connection logs, file transfer logs and backup logs.

Note: When the log size reaches its limit, the oldest record will be removed for space-saving consideration. The maximum numbers of File Transfer log entries are as follows:

Windows file service: 100,000 FTP: 20,000 WebDAV: 20,000 File Station: 20,000

To delete log records: 1 Click the tab to select the log item you want to delete.

2 Click Clear to delete the log records.

Synology DiskStation User's Guide

Based on DSM 4.1

165 Chapter 18: Perform Advanced Management Tasks

To save log records: 1 Click the tab to select the log item you want to save.

2 Click the arrow next to Save. You can choose to save in HTML or CSV format.

3 The log records will be saved into the format you chose. You can choose to open it or save it to a disk.

To refresh the log: Click Refresh to reload the page and get the most updated log records.

To search the log: 1 Click the double arrow next to Search to unfold the search section.

2 Specify the criteria in the fields and then click Search.

Monitor System Resources Go to Main Menu > Resource Monitor to monitor system resources. You can choose to monitor in real time or view the previous data.

Note: Previous data will be shown once Enable usage history is ticked in the Advanced Settings tab.

Performance Click on Performance tab to view the resource utilization data. Detailed date, time and information of the chart will be shown upon mouse-over.

The system resources include the following: CPU: You can see the overall CPU usage of User, System and I/O Wait. The Load Average within 1, 5, and

15 minutes shows the run-queue length. CPU load could be high when Resource Monitor is first launched, because the system needs to collect its resource data and load the UI page at the same time. Please note that keeping Resource Monitor launched will consume system resource.

Synology DiskStation User's Guide

Based on DSM 4.1

166 Chapter 18: Perform Advanced Management Tasks

Memory: The overall memory usage of physical memory and swap space will be shown. Memory usage remains high because the system stores frequently accessed data in cache, so the data can be quickly obtained without accessing the hard disk. Cache memory will be released when overall memory is insufficient.

Disk: You can choose to view the overall disk utilization, transfer rate or IOPS by clicking the drop-down menu at the top of the chart. You can click View All at the bottom to select more disks by ticking the checkboxes to add their data to the chart.

Network: The network flow chart displays the data sent and received rate in KB per second. If PPPoE is enabled, its transfer rate will also show up on the chart.

Process Click on Process tab to view the CPU and memory usage of each process in the order of decreasing CPU load.

Advanced Settings Click on Advanced Settings tab to set up additional options.

To change the time duration of real time display: Choose the Real time duration in minutes from the drop-down menu.

To enable usage history: Tick Enable usage history if you want to view previous data. When it is enabled, you can switch between Real Time, 1 Day, 1 Week, 1 Month and 1 Year from the drop-down menu at the top-right corner when viewing performance charts.

Update DSM Go to Main Menu > Control Panel > DSM Update to keep your Synology DiskStation up to date.

Important: The data saved on the Synology DiskStation will not be erased during the updating process. However, for security reason, we strongly recommend that you back up the data first.

Synology DiskStation User's Guide

Based on DSM 4.1

167 Chapter 18: Perform Advanced Management Tasks

To check if the latest DSM is available for download: When you go to this page, the system will check with Synology Website for any updates. The check results (shown in the Status field) might be any of the following:

Current DSM is the latest version. The latest [DSM_VERSION] is ready for download.

To have the system download the latest DSM and perform the update: 1 If the latest DSM is ready for download, click the Download link to have the system download the latest DSM

for you.

2 The system will display any of the following desktop notifications to tell you whether the download is successful or not: DSM Download Completed or DSM Download Failed.

3 Click the desktop notification window to go to DSM Update.

4 Do any of the following:

If DSM download completed, click Update now to start updating DSM immediately. If DSM download failed, click Retry to have the system download the latest DSM from Synology again.

To check for updates regularly: 1 Tick Check for update regularly.

2 Click OK.

After you enable the function, the system will check for the latest DSM regularly, download it automatically, and then display desktop notification when DSM download completes.

Troubleshooting

If you see error messages (in red text) during checking or downloading the latest DSM, the following suggestions might help solve your problem: Check if the upgrading process was interrupted by users, or other unexpected events, such as a power

failure. Check the DSM version. You can only update the system with a newer DSM version. Download the DSM update again because the update file might be corrupted. If the problem remains, please contact Synology's Technical Support.

To perform manual DSM update: 1 Visit Synology's Download Center to download the latest .pat update file to your local computer. Unzip the file

to get a .pat update file.

2 Click Manual DSM Update to enter Manual DSM Update Page.

3 Click Browse to select the update file.

4 Click OK to start to update your DSM. The system will reboot automatically when the update completes.

Troubleshooting

If you cannot update DSM, the following suggestions might help solve your problem: Check if the upgrading process was interrupted by users, or other unexpected events, such as a power

failure. Check the DSM version. You can only update the system with a newer DSM version. Download the DSM update again because the update file might be corrupted. If the problem remains, please contact Synology's Technical Support.

Synology DiskStation User's Guide

Based on DSM 4.1

168 Chapter 18: Perform Advanced Management Tasks

Receive Event Notifications Go to Main Menu > Control Panel > Notification and set up Synology DiskStation to notify you via e-mail, SMS, mobile devices, Windows Live Messenger, or Skype, when status changes or errors occur to the system, for example: connection loss, fan behavior change, power failure, storage volume running out of space, or back and restoration failure, etc.

For more information about how to select notification event types and edit notification messages, click the Help button (with a question mark) at the top-right corner, and then go to Control Panel > System > Notification > Advanced.

Manage E-mail Notification Service Click the E-mail section to set up email notifications.

To enable E-mail notification: Tick Enable e-mail notifications and complete the following settings:

1 Enter the SMTP server name or IP address.

2 By default, the SMTP port number is 25. Modify the number if you have specified a different SMTP port while setting up port forwarding rules.

3 If your SMTP server requires SSL/TLS connection, tick Secure connection (SSL/TLS) is required.

4 If your SMTP server requires SMTP authentication, click SMTP authentication and tick Authentication required, enter your username and password for the email server, and then click Save.

5 Enter the email address that will receive the notification mails in the Primary email or the Secondary email field.

6 Click Send a test email to see if your email settings are set up properly.

7 If you want to add a subject prefix in front of the notification mail subject, enter it in the Subject prefix field. The prefix helps you identify which DiskStation the notification mail was sent from.

8 If you want to send a notification mail to the newly created user, tick Send a notification mail to the newly created user, and the user will receive a mail when his/her account is created.

Synology DiskStation User's Guide

Based on DSM 4.1

169 Chapter 18: Perform Advanced Management Tasks

9 Click Apply to save the configuration, or click Cancel to cancel the setup.

More Information

About SMTP server's domain name: The SMTP server can be an IP address or a domain name. If it is a domain name, please make sure a valid DNS server IP has been entered at Main Menu > Control Panel > Network, and make sure the server is on the Internet.

Manage SMS Notification Service Click the SMS section to set up SMS notifications.

To enable SMS notification: Tick Enable SMS notifications and complete the following settings:

1 Select a SMS provider from the SMS service provider drop down list. The default service provider is "clickatell".

2 Click Add to create a new SMS provider configuration or click Delete to delete the selected SMS provider configuration.

3 In the Username field, enter the username of your SMS service account.

4 In the Password and Confirm password field, enter and confirm the password of your SMS service account.

5 Enter your Primary phone number or Secondary phone number. If both numbers are entered, SMS notification messages will be sent to both numbers.

6 If you do not wish to receive too many messages, tick Enable SMS interval limit and limit the number of notification messages to one message per the time interval you specified.

7 Click Send a test SMS message to send a test SMS message to the phone number you specified. If no message is received, it means the configuration is incorrect.

8 Click Apply to save the configuration, or click Cancel to cancel the setup.

Note:

Username: case sensitive and must be between 1 and 32 Unicode characters. Password: case sensitive and must be between 0 and 24 displayable characters, including letters, numbers,

signs, and space. The SMS interval limit must be between 1 and 10000 minutes. Fees might apply to send SMS messages. Contact your local SMS service provider for more information.

To create a SMS provider configuration: 1 Click Add.

2 In the Provider name field, enter the name of your SMS service provider.

3 In SMS URL field, enter a SMS URL with the message content set to "Hello world." You can obtain the SMS URL from your SMS service provider.

4 Click Next. 5 The system will break down the SMS URL into several parameters. Define each parameter by selecting the

corresponding category. Each parameter category can be used only once except Other.

Note: Provider name is case sensitive and must be between 1 and 32 Unicode characters.

Synology DiskStation User's Guide

Based on DSM 4.1

170 Chapter 18: Perform Advanced Management Tasks

More Information SMS URL: case sensitive and must be between 1 and 500 Unicode characters. The number of parameters must be between 4 and 10. This SMS URL is only for setup purposes. No SMS message will be sent after setup is completed. The format of this URL is provided by the SMS service provider, and the URL must include the following parameters: username, password, destination phone, and message content.

Using Clickatell as an example, a sample URL would be the following (reference only): https://api.clickatell.com/http/sendmsg?user=TestUser&password=TestPassword&api_id=3148203&to=8861234 56789&text=Hello+world

Please note that in "message content" parameter, the space between "Hello" and "world" will be replaced by the particular character defined by the service provider.

Manage Mobile Devices and Instant Messaging Notifications Click the Push Service section to set up mobile device and instant messaging notifications.

To enable mobile device notifications: 1 Tick Enable mobile device notifications, and then click Apply.

2 Install and launch DS finder on your mobile device, and then add your DiskStation to the Favorite list to pair your mobile with the DiskStation. For more information, refer to its Help file.

3 Click Send a test message and then click OK to send a test notification. Now you can launch DS finder on your mobile device to check whether the test message is received.

To manage paired mobile devices: 1 Click Manage paired devices to see the list of all paired mobile devices.

2 If you want to unpair any of the devices, select them and click Unpair. (Press and hold Shift or Ctrl while making multiple selections.) No notification will be sent to them unless you pair them up again.

To enable instant messaging notifications: 1 Tick Enable Windows Live Messenger notifications and/or Enable Skype notifications, and then

click Apply.

2 Enter one or more instant messaging accounts in the Windows Live Messenger account and/or the Skype account field.

Note: For each instant messaging program, the maximum number of accounts is 2. You must separate them with ';'.

3 Log in to your instant messaging program to accept friend invitation from Synology's push service.

4 Click Send a test message and then click OK to send a test notification. Now you can launch your instant messaging program to check whether the test message is received.

Access Applications with Independent Login Go to Main Menu > Control Panel > Application Portal to configure connection settings of applications, which allows you to run the applications in an independent browser window without logging in to DSM. These connection settings include customizing portal aliases, HTTP and HTTPS ports.

Note: Applications whose connection settings can be configured via Application Portal are: Audio Station, Download Station, Surveillance Station, Video Station, File Station.

Synology DiskStation User's Guide

Based on DSM 4.1

171 Chapter 18: Perform Advanced Management Tasks

Customized Alias Applications can be opened in an independent browser window at [http(s)://DSM server address:DSM server port number [HTTP(S)]/alias name/] once the portal alias is set up.

To enable a customized alias: 1 Select an application, and click Edit or double-click the selected application.

2 In the window that appears, tick Enable customized alias, specify a customized alias, and click OK.

3 Click Save on the main page. The application can be accessed via the customized portal alias.

To redirect from [http(s)://DSM server address/alias name/]: 1 Tick Redirect from and click OK.

2 Click Save on the main page.

It spares you the trouble of memorizing the port number for each application, and allows you to type in your easy- to-remember customized alias (when enabled) at the address bar.

Note:

Following are the respective default aliases of the applications, Audio Station, Download Station, Surveillance Station, Video Station, File Station: audio, download, cam, video, file.

Alias names cannot be the same as those reserved for system, browsers, or used by other applications, and their number of characters must be limited within 2 to 20.

Alias names can consist of mixed case letters, numeric characters, and two special characters (-), (_), but these two characters can only be used for the other characters except the first and last ones.

Customized HTTP(S) Ports Applications can be opened in an independent browser window at [http(s)://DSM server address:customized port number] once the HTTP(S) port is set up.

To enable a customized port [HTTP(S)]: 1 Select an application, and click Edit or double-click the selected application.

2 In the window that appears, tick Enable customized port [HTTP(S)], specify a customized port number, and click OK.

3 Click Save on the main page. The application can be accessed via the customized HTTP(S) port.

Note: The range of port number can be from 1 to 65535, but the following ports should be excluded because they are reserved for system use: 20, 21, 22, 23, 25, 80, 110, 137, 138, 139, 143, 199, 443, 445, 515, 543, 548, 587, 873, 993, 995, 3306, 3689, 5000, 5001, 5005, 5006, 5335, 5432, 6881, 8080, 7000, 7001, 8081, 9997, 9998, 9999, 50001, 50002, eMule default ports: 4662 (TCP), 4672(UDP), and FTP default port range: the actual range may vary depending on different models.

Index Multimedia Files for Applications Go to Main Menu > Control Panel > Media Indexing Service to have Media Indexing Service automatically scan multimedia files, such as photos, music, and videos stored on your DiskStation, and compile them into the media library to be indexed by multimedia applications: Media Server, Audio Station, Photo Station, and iTunes Server.

Re-index Media Files Multimedia data within the installed applications can be scanned and re-indexed for the following applications.

Synology DiskStation User's Guide

Based on DSM 4.1

172 Chapter 18: Perform Advanced Management Tasks

To re-index media files: Click Re-index to re-construct the index structure of all media files in the indexed folders, both default folders and the ones created by you. The process will be executed in the background.

Reset admin's Password If you forgot the password for admin and are therefore unable to log in to DSM, you can reset the password to blank and set a new password.

To reset admin's password: Press and hold the RESET button on the back panel of your Synology DiskStation for 4 seconds until you heard a beep sound.

Note: Other than resetting administrator's password, using the RESET button will also restore Synology DiskStation's IP and DNS to the default value.

Restore Synology DiskStation to Factory Defaults Go to Main Menu > Control Panel > Restore Defaults if you want to restore your Synology DiskStation to factory defaults.

There are three restore options: Format the hard disk but keep the current settings: All user data in the hard drive will be deleted; whereas

the system configurations will remain. Format the hard disk and restore to factory default settings: All user data in the hard drive will be deleted

and the entire system will be restored to default. Reset MySQL Database Password: The password of the MySQL database will be reset.

If you wish to delete your MySQL databases, check the Delete MySQL Databases checkbox and click Apply.

Reinstall Synology DiskStation If you want to reinstall your Synology DiskStation without losing its data, you can use the RESET button on the back panel.

To reinstall Synology DiskStation: 1 Press and hold the RESET button for about 4 seconds until the Synology DiskStation emits a beep sound.

Synology DiskStation User's Guide

Based on DSM 4.1

173 Chapter 18: Perform Advanced Management Tasks

2 Within the next 10 seconds, press and hold RESET button for about 4 seconds until the Synology DiskStation emits a beep sound.

3 Run Synology Assistant and follow the installation instructions in the Quick Installation Guide that came with your installation disc to set up the Synology DiskStation.

Important: The data saved on the Synology DiskStation will not be erased during the reinstallation. However, for security reason, we strongly recommend that you back up the data first.

Enable SNMP Service Go to Main Menu > Control Panel > SNMP to enable SNMP service, which allows users to monitor Synology DiskStation network flow with the network management software.

Currently, SNMPv1, SNMPv2c and SNMPv3 protocols are supported.

To enable SNMPv1, SNMPv2c service: 1 Tick Enable SNMP service.

2 Tick SNMPv1, SNMPv2c service.

3 Enter a Community name.

4 Click Apply.

To enable SNMPv3 service: 1 Tick Enable SNMP service.

2 Tick SNMPv3 service.

3 Enter a User name and Password. Enter your password again to Confirm password.

4 Click Apply.

Synology DiskStation User's Guide

Based on DSM 4.1

174 Chapter 18: Perform Advanced Management Tasks

Note:

Entering the Name, Location, and Email will help you identify your Synology DiskStation. These fields are optional.

IPv4 and IPv6 are supported by SNMP service. SNMP service supports SNMPv1, SNMPv2c and SNMPv3 simultaneously.

Enable Terminal Services Go to Main Menu > Control Panel > Terminal to enable Terminal service, allowing you to use Telnet or SSH to log in to Synology DiskStation and modify its settings.

To enable connection to Synology DiskStation via Telnet or SSH: 1 Do any of the following:

If you want to enable the Telnet service, tick Enable Telnet service. If you want to enable the SSH service, tick Enable SSH service.

Note: When you disable the SSH service, all SSH tasks will be terminated immediately. If you disable the SSH service while performing a backup task, perform the task again after the SSH service is disabled.

2 Click Apply.

Important: Use the Terminal service with caution. Improper manipulation or modification to Synology DiskStation may result in system malfunction or data loss.

175

Chapter

19 Chapter 19: Communicate with Mobile Devices

As Internet access grows popular on mobile devices, Synology provides you with several creative alternatives to communicate with your Synology DiskStation using iOS/Android, Windows Phone, or other mobile devices.

Manage DSM Settings with DSM mobile DSM mobile allows DSM admin (or a user belonging to the administrators group) to manage DSM settings and check DSM information with the web browser of an iOS (iPhone, iPad or iPod touch), Android device, or Windows Phone.

To log in to DSM mobile: 1 Use the web browser of your iOS/Android device or Windows Phone to connect to

http://Synology_Server_IP:5000.

2 Enter your DSM user credentials and tap Login.

Note: For more information about DSM mobile, tap Help on the home page.

Use iOS, Android, and Windows Apps The Synology mobile apps are now available on Apple's App Store, Android Market, and Windows Marketplace, allowing you to communicate with Synology DiskStation wherever Wi-Fi access is available. You can manage your DiskStation files, music, photo and video albums, even the surveillance videos, download files, and watch videos on the go.

DS download DS download allows you to access Download Station and download files directly with an iOS device. You can create download tasks by adding a url, via a built-in mini browser of the application, or the integrated Safari browser for user convenience. Managing basic settings such as transfer speed limits or activating the advanced schedule is also possible.

DS video DS video allows you to access Video Station and watch videos both at home and on the move with an iOS device. You can browse and organize your collections of videos, record digital TV programs available at the place you are located with a USB DTV dongle (sold separately) plugged into your DiskStation, and manage your recording tasks and schedules.

DS audio DS audio allows you to access Audio Station with an iOS/Android device or Windows Phone and listen to your favorite music on the go. Besides, the remote controller feature allows you to control Audio Station's music playback when there is an audio output device connected to the USB port of your DiskStation, such as a USB speaker, or an external speakers or home stereo equipment connected to the audio dock of Synology Remote (sold separately).

DS cam DS cam allows users who own an iOS or Android device to live view their IP cameras, take snapshots, and view recorded events from your Surveillance Station whenever a network connection is available.

Synology DiskStation User's Guide

Based on DSM 4.1

176 Chapter 19: Communicate with Mobile Devices

DS photo+ DS photo+ allows you to access Photo Station with an iOS/Android device or Windows Phone and share your precious moments on the go. Download and save photos from Photo Station to your mobile device so you can enjoy the flashbacks anytime anywhere. You can also use DS photo+ to upload snapshots or videos from your camera phone straight to Photo Station. Besides, you and your friends can interact by leaving comments on any photos, adding more fun to your photo sharing experiences.

DS file DS file allows you to access and manage DiskStation files with an iOS/Android device or Windows Phone.

DS finder DS finder allows you to monitor or email the status of your DiskStation, and request it to perform wake on LAN (WOL), restart, shut down, or play beep sounds (to help you quickly find the its location) with an iOS/Android device or Windows Phone.

Note: For more information about those mobile Apps, refer to the Help files that come with the Apps.

Use Other Mobile Devices If you have a mobile device running on Windows Mobile 6.0 (with Internet Explorer Mobile or Opera 9.0 or later), Symbian OS 9.1 (with S60 3rd Edition or later), or iPhone OS 2.3.1 or later, you can use the device to log in to Synology DiskStation to view photos with Mobile Photo Station and read supported file formats with Mobile File Station around the world where Internet access is available.

177

Troubleshooting

For any questions about managing your DSM, go to Main Menu > DSM Help or click the Help button (with a question mark) at the top-right corner of every window. For any questions other than that, please visit Synology Inc. website www.synology.com for further assistance.

SYNOLOGY, INC. END USER LICENSE AGREEMENT

IMPORTANTREAD CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE" OR ELECTRONIC DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE") AVAILABLE FOR DOWNLOAD AT WWW.SYNOLOGY.COM OR PROVIDED WITH OR INSTALLED ON A SYNOLOGY PRODUCT (THE "PRODUCT").

YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY OPENING THE PACKAGE CONTAINING THE SOFTWARE, INSTALLING THE SOFTWARE NOT OTHERWISE PRE-INSTALLED BY SYNOLOGY ON A PRODUCT OR OTHERWISE USING A PRODUCT THAT INCLUDES PRE-INSTALLED SOFTWARE. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT OPEN THE BOX CONTAINING THE PRODUCT, INSTALL THE SOFTWARE OR USE THE PRODUCT CONTAINING THE SOFTWARE. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.

Section 1. Limited Software License. Subject to the terms and conditions of this EULA, Synology grants you a limited, non-exclusive, non-transferable, personal license to install, run and use one copy of the Software on the Product solely in connection with your authorized use of the Product.

Section 2. Documentation. You may make and use a reasonable number of copies of any documentation provided with the Software; provided, that such copies will only be used for internal business purposes and are not to be republished or redistributed (either in hard copy or electronic form) to any third party.

Section 3. Backup. You may make a reasonable number of copies of the Software for backup and archival purposes.

Section 4. Updates. Any software provided to you by Synology or made available on the Synology web site at www.synology.com ("Web Site") that updates or supplements the original Software is governed by this EULA unless separate license terms are provided with such updates or supplements, in which case, such separate terms will govern.

Section 5. License Limitations. The license set forth in Section 1 applies only to the extent you have ordered and paid for the Product and it states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA. Without limiting the foregoing, you will not, and you will not authorize or permit any third party to: (a) use the Software for any purpose other than in connection with the Product; (b) license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Software or use the Software in any commercial hosted or service bureau environment; (c) reverse engineer, decompile, disassemble or attempt to discover the source code for or any trade secrets related to the Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivative works of the Software; (e) remove, alter or obscure any copyright notice or other proprietary rights notice on the Product; or (f) circumvent or attempt to circumvent any methods employed by Synology to control access to the components, features or functions of the Product or Software.

Section 6. Open Source. The Software may contain components licensed to Synology under the GNU General Public License ("GPL Components"), currently available at http://www.gnu.org/licenses/gpl.html. The terms of the GPL will control solely with respect to the GPL Components to the extent that this EULA conflicts with the requirements of the GPL with respect to your use of the GPL Components, and, in such event, you agree to be bound by the GPL with respect to your use of such components.

Section 7. Audit. Synology will have the right to audit your compliance with the terms of this EULA. You agree to grant access to Synology to facilities, equipment, books, records

and documents and to otherwise reasonably cooperate with Synology in order to facilitate any such audit.

Section 8. Ownership. The Software is valuable property of Synology and its licensors and is protected by copyright and other intellectual property laws and treaties. Synology or its licensors own all right, title and interest in and to the Software and all copyright and other intellectual property rights in the Software.

Section 9. Limited Warranty. Synology warrants that for a period of ninety (90) days after either your (a) installation of the Software on Products that do not include pre-installed Software or (b) use of a Product that includes pre-installed Software, as applicable, (the "Warranty Period"), the Software will substantially conform to Synology's published specifications for the Software, if any, or otherwise set forth on the Web Site. Synology will use commercially reasonable efforts to, in Synology's sole discretion, either correct any such nonconformity in the Software or replace any Software that fails to comply with the foregoing warranty, provided that you give Synology written notice of such noncompliance within the Warranty Period. The foregoing warranty does not apply to any noncompliance resulting from any: (w) use, reproduction, distribution or disclosure not in accordance with this EULA; (x) any customization, modification or other alteration of the Software by anyone other than Synology; (y) combination of the Software with any product, services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA.

Section 10. Support. During the Warranty Period, Synology will make available to you the support services. Following the expiration of the applicable Warranty Period, support for Software may be available from Synology upon written request.

Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, SYNOLOGY AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.

Section 12. Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR THE COST OF COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR

INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Section 13. Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties, disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to you.

Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations.

Section 15. U.S. Government License Rights. All Software provided to the U.S. Government is provided with the commercial license rights and restrictions described in this EULA. By installing, copying or using the Software, the U.S. Government agrees that the Software is "commercial computer software" or "commercial computer software documentation" within the meaning of FAR Part 12.

Section 16. Termination. Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the Software and all of its component parts.

Section 17. Assignment. You may not transfer or assign your rights under this EULA to any third party. Any such transfer or assignment in violation of the foregoing restriction will be void.

Section 18. Applicable Law. Unless expressly prohibited by local law, this EULA is governed by the laws of the State of Washington, U.S.A. without regard to any conflict of law principles to the contrary. The 1980 U.N. Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.

Section 19. Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Software or services provided by Synology with respect to the Software or the relationship between you and Synology

will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association if you reside in the United States, except as otherwise provided below. In such cases, the arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class- wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class- action basis, and you expressly and knowingly waives those rights and agrees to resolve any disputes through binding arbitration in accordance with the provisions of this Section 19. If you do not reside within the United States, any dispute, controversy or claim described in this Section shall be finally resolved by arbitration conducted by three neutral arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights.

Section 20. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.

Section 21. Severability. If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this EULA will remain in full force and effect.

Section 22. Entire Agreement. This EULA sets forth the entire agreement of Synology and you with respect to the Software and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether written or oral. No amendment, modification or waiver of any of the provisions of this EULA will be valid unless set forth in a written instrument signed by the party to be bound thereby.

SYNOLOGY, INC. LIMITED PRODUCT WARRANTY

THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.

Section 1. Definitions. (a) "Category I Product" means Synology product models RS810+, RS810RP+ and RX410. (b) "Category II Product" means Synology product models RS3413xs+, RS3412xs, RS3412RPxs, RS2212+, RS2212RP+, RS812+, RS812RP+, DS2413+, DS3612xs, DS1812+, DS1512+, DS713+, DS712+, DS3611xs, DS2411+, DS1511+, DS1010+, DS710+, DS509+, DS508, RS812, RS212, RS3411xs, RS3411RPxs, RS2211+, RS2211RP+, RS411, RS409RP+, RS409+, RS409, RS408- RP, RS408, RS407, RX1211, RX1211RP, DX513, DX1211, DX510, DX5, RX4, and RAM Module (1GB/2GB/4GB/8GB). (c) "Category III Product" means all other Synology product models purchased by Customer after March 1, 2008. (d) "Category IV Product" means all other Synology product models purchased by Customer before February 29, 2008. (e) "Customer" means the original person or entity purchasing the Product from Synology or an authorized Synology distributor or reseller. (f) "Product" means a Category I Product, Category II Product, Category III Product, or Category IV Product and any hardware incorporated into the product by Synology and any accompanying documentation. (g) "Software" means the Synology proprietary software that accompanies the Product when purchased by Customer, is downloaded by Customer at the Web Site, or is pre-installed on the Product by Synology, and includes any firmware, associated media, images, animations, video, audio, text and applets incorporated into the software or Product and any updates or upgrades to such software. (h) "Warranty Period" means: (i) the period commencing on the date the Product is purchased by Customer and ending (1) five years after such date for Category I Products; (2) three years after such date for Category II Products; or (3) two years after such date for Category III Products; or (4) one year after such date for Category IV Products. (i) "Web Site

www.synology.com " means the Synology

web site located at .

Section 2. Limited Warranty and Remedies

2.1 Limited Warranty. Subject to Section 2.7, Synology warrants to Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period. Synology warrants the Software as set forth in the accompanying end user license agreement provided with the Product, if any.

2.2 Product Registration. Customers may register Products with Synology and may obtain the manufacturing date for Category I Products, Category II Products and Category III Products at the Web Site. The failure to register a Product at the Web Site will not diminish the warranty rights set forth in Section 2.1. Synology is not responsible for Customer's failure to identify the manufacturing date of any Product.

2.3 Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties set forth in Section 2.1 within the applicable Warranty Period in the manner set forth below, then, upon verification of the noncompliance by Synology, Synology will, at Synology's option: (a) use commercially reasonable efforts to repair the Product, or (b) replace the noncomplying Product or part thereof upon return of the complete Product in accordance with Section 2.4 The foregoing sets forth Synology's entire liability and Customer's sole and exclusive remedy for any

breach of warranty under Section 2.1 or any other defect or deficiency in the Product. Customer will reasonably assist Synology to diagnose and validate any nonconformity with the Product. The warranty set forth in Section 2.1 does not include: (1) any warranty relating to the Software; (2) physical installation or removal of the Product from Customer's site; (3) visits to Customer's site; (4) labor necessary to effect repairs or replace defective parts other than during Synology's or its contracted service providers' normal local business hours, exclusive of weekends and service providers holidays; (5) any work with any third party equipment or software; (6) any warranty of the hard disk if installed by Customer or any other third party; or (7) any warranty of compatibility with the hard disk.

2.4 Return. Any Product returned by Customer under Section 2.3 must be assigned a Return Merchandise Authorization ("RMA") number by Synology before shipment and must be returned in accordance with Synology's then current RMA procedures. Customer may contact any authorized Synology distributor or reseller or Synology Support to obtain assistance in obtaining an RMA, and must provide proof of purchase and product serial number when asking for such assistance. For warranty claims, Customer must return the complete Product to Synology in accordance with this Section 2.4 to be eligible for coverage under this Warranty. Any Product returned without an RMA number, or any Product that has been disassembled (except under the direction of Synology) will be refused and returned to Customer at Customer's expense. Any Product that has been assigned a RMA number must be returned in the same condition as it was received from Synology to the address designated by Synology, freight pre-paid, in packaging sufficient to protect the contents thereof and with the RMA number prominently displayed on the outside of the box. Customer is responsible for insurance and risk of loss with respect to returned items until they are properly received by Synology. A Product issued a RMA number must be returned within fifteen (15) days after issuance of the applicable RMA number.

2.5 Replacement by Synology. If Synology elects to replace any Product under this Warranty set forth in Section 2.1, then Synology will ship a replacement Product at Synology's expense via the shipping method selected by Synology after receipt of the nonconforming Product returned in accordance with Section 2.4 and validation by Synology that the Product does not conform to the warranty. Replacement Product will be new or serviceably used, comparable in function and performance to the original Product and warranted for the remainder of the original Warranty Period or thirty (30) days after it is shipped to Customer, whichever period is longer Any Product found by Synology to be non-defective will be returned to Customer.

2.6 Support. During the Warranty Period, Synology will make available to Customer the support services. Following the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request.

2.7 Exclusions. The foregoing warranties and warranty obligations do not apply to any Product that (a) has been installed or used in a manner not specified or described in the Product specifications; (b) has been repaired, modified or altered by anyone other than Synology or its agent or designee; (c) has been in any way misused, abused, or

damaged; (d) has been used with items not provided by Synology other than the hardware or software for which the Product is designed; or (e) otherwise fails to conform to the Product specifications and such failure is attributable to causes not within or under Synology's control. Further, the foregoing warranties will be void if (1) Customer disassembles the Product except as authorized by Synology; (2) Customer fails to implement any correction, modification, enhancement, improvement or other update made available to Customer by Synology; or (3) Customer implements, installs or uses any correction, modification, enhancement, improvement or other update made available by any third party. The warranty set forth in Section 2.1 will terminate upon Customer's sale or transfer of the Product to a third party.

2.8 Disclaimer of Warranties. THE WARRANTIES, OBLIGATIONS, AND LIABILITIES OF SYNOLOGY AND THE REMEDIES OF CUSTOMER SET FORTH IN THIS WARRANTY ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND CUSTOMER HEREBY WAIVES, RELEASES AND DISCLAIMS, ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF SYNOLOGY AND ALL OTHER RIGHTS, CLAIMS AND REMEDIES OF CUSTOMER AGAINST SYNOLOGY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO THE PRODUCT, ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES DELIVERED UNDER THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY: (A) IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE; (B) IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE; (C) CLAIM OF INFRINGEMENT OR MISAPPROPRIATION; OR (D) CLAIM IN TORT (WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY OR OTHER THEORY). SYNOLOGY MAKES NO GUARANTEE AND SPECIFICALLY DISCLAIMS ANY WARRANTY THAT THE DATA OR INFORMATION STORED ON ANY SYNOLOGY PRODUCT WILL BE SECURE AND WITHOUT RISK OF DATA LOSS. SYNOLOGY RECOMMENDS THAT CUSTOMER TAKES APPROPRIATE MEASURES TO BACK UP THE DATA STORED ON THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO CUSTOMER.

Section 3. Limitations of Liability

3.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).

3.2 Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS SUPPLIERS BE LIABLE FOR THE COST OF COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

3.3 Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING

TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT ACTUALLY PAID BY CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUSTOMER MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow exclusion or limitation of certain damages. To the extent that those laws apply to the Product, the exclusions and limitations set forth above may not apply to Customer.

Section 4. Miscellaneous

4.1 Proprietary Rights. The Product and any accompanying Software and documentation provided with the Product include proprietary and intellectual property rights of Synology and its third party suppliers and licensors. Synology retains and reserves all right, title, and interest in the intellectual property rights of the Product, and no title to or ownership of any intellectual property rights in or to the Product, any accompanying Software or documentation and any other goods provided under this Warranty is transferred to Customer under this Warranty. Customer will (a) comply with the terms and conditions of the Synology end user license agreement accompanying any Software furnished by Synology or an authorized Synology distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or otherwise misappropriate, circumvent or violate any of Synology's intellectual property rights.

4.2 Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise, without the prior written consent of Synology.

4.3 No Additional Terms. Except as expressly permitted by this Warranty, neither party will be bound by, and each party specifically objects to, any term, condition or other provision that conflicts with the provisions of this Warranty that is made by the other party in any purchase order, receipt, acceptance, confirmation, correspondence or otherwise, unless each party specifically agrees to such provision in writing. Further, if this Warranty conflicts with any terms or conditions of any other agreement entered into by the parties with respect to the Product, this Warranty will prevail unless the other agreement specifically references the sections of this Warranty that it supersedes.

4.4 Applicable Law. Unless expressly prohibited by local law, this Warranty is governed by the laws of the State of Washington, U.S.A. without regard to any conflict of law principles to the contrary. The 1980 U.N. Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.

4.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services provided by Synology with respect to the Product or the relationship between Customers residing within the United States and Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties. The prevailing party in any arbitration or legal action occurring within the United

States or otherwise shall receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. Customer understands that, in the absence of this provision, Customer would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and Customer expressly and knowingly waives those rights and agrees to resolve any disputes through binding arbitration in accordance with the provisions of this Section 4.5. For Customers not residing within the United States, any dispute, controversy or claim described in this section shall be finally resolved by arbitration conducted by three neutral arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any

actual or threatened breach of any provision of this Warranty relating to Synology's intellectual property rights.

4.6 Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.

4.7 Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with all applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration Regulations.

4.8 Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this Warranty will remain in full force and effect.

4.9 Entire Agreement. This Warranty constitutes the entire agreemen

Manualsnet FAQs

If you want to find out how the DS212j Synology works, you can view and download the Synology DS212j v9 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Synology DS212j as well as other Synology manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Synology DS212j. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Synology DS212j v9 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Synology DS212j v9 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Synology DS212j v9 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Synology DS212j v9 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Synology DS212j v9 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.