Contents

Synology DVA3221 v2 Installation Guide PDF

1 of 25
1 of 25

Summary of Content for Synology DVA3221 v2 Installation Guide PDF

Synology Network Video Recorder DVA3221

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start Package Contents 3 Synology DVA3221 at a Glance 4 LED Indicator Table 5 Hardware Specification 6 Optional Accessories 7 Spare Parts 7 Safety Instructions 8

Chapter 2: Hardware Setup Tools and Parts for Component Installation 9 Install Drives 9 Start Up Your Network Video Recorder 11 Expand the Memory of the Network Video Recorder 12

Chapter 3: System Maintenance Replace System Fan 15 Initial Troubleshooting Guide 17

Chapter 4: Install DSM on Network Video Recorder Install DSM with Web Assistant 18 Learn More 18

Synology_HIG_DVA3221_20200310

2

Thank you for purchasing this Synology product! Before setting up your new Network Video Recorder, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your Network Video Recorder.

Note: All images below are for illustrative purposes only, and may differ from the actual product.

Package Contents Main unit x 1 AC power cord x 1

RJ-45 LAN cable x 2

Screws for 2.5" hard drives x 18

Hard drive tray key x 2

Before You Start 1 Chapter

3

4 Chapter 1: Before You Start

Synology DVA3221 at a Glance

4 51

2

3

16

17

10 11 141312

6

8

7

9 15

No. Article Name Location Description

1 Drive Status Indicator

Front

Displays the status of each drive. For more information, see "LED Indicator Table".

2 Drive Tray Lock Lock or unlock drive trays.

3 Drive Tray Install drives (hard disk drives or solid state drives) here.

4 Status Indicator Displays the status of the system. For more information, see "LED Indicator Table".

5 Alert Indicator Displays warnings regarding fan or temperature. For more information, see "LED Indicator Table".

6 LAN Indicator Displays the status of the network connection. For more information, see "LED Indicator Table".

7 Power Button 1. Press to power on your Network Video Recorder. 2. To power off your Network Video Recorder, press and hold until you

hear a beep sound and the Power LED starts blinking.

8 USB 3.0 Port Connect external hard drives or other USB devices to the Network Video Recorder here.

9 Fan

Rear

Disposes of excess heat and cools the system. If the fan malfunctions, the Network Video Recorder will emit a beeping sound.

10 eSATA Port 1 Connect Synology Expansion Unit1 to the Network Video Recorder here.

11 LAN Port Connect network cable here.

12 USB 3.0 Port Connect external hard drives or other USB devices to the Network Video Recorder here.

13 eSATA Port 2 Connect Synology Expansion Unit1 to the Network Video Recorder here.

14 Kensington Security Slot Attach a Kensington security lock here.

15 Power Port Connect power cord here.

16 COM Port Connect a POS device here.

17 RESET Button

1. Press and hold until you hear a beep sound to restore the IP address, DNS server, and password for the admin account to default.

2. Press and hold until you hear a beep, then press and hold again until you hear three beeps to return the Network Video Recorder to Not Installed status so that DiskStation Manager (DSM) can be reinstalled.

1 For more information about Synology Expansion Unit supported by your Network Video Recorder, please visit www.synology.com.

5 Chapter 1: Before You Start

LED Indicator Color Status Description

Power Blue

Static Powered on

Blinking Booting up/Shutting down

Off Powered off

STATUS

Green Static Volume normal

Orange Blinking

Volume degraded/Volume crashed

Volume not created

DSM not installed

Off HDD hibernation

ALERT Orange Blinking Fan failure/Over temperature

Off System normal

Disk Status Indicator (on tray)

Green Static Drive ready and idle

Blinking Accessing drive

Orange Static Drive error1

Off No internal drive

Front LAN Green

Static Network connected

Blinking Network active

Off No network

Rear LAN (on right side of jack)

Green Static 1 Gbps connection

Orange Static 100 Mbps connection

Off 10 Mbps connection/No network

Rear LAN (on left side of jack)

Green Static Network connected

Blinking Network active

Off No network

Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.

LED Indicator Table

1 Please try to restart your Network Video Recorder or re-insert the drive(s), then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical Support for help.

6 Chapter 1: Before You Start

Item DVA3221

Compatible Drive Type 3.5"/2.5" SATA x 4

Maximum Internal Raw Capacity

64 TB (4 X 16 TB HDD) 224 TB with 2 x DX517 (expansion unit)

External Port USB 3.0 x 3 eSATA x 2

Com Port x 1

LAN Port 1GbE (RJ-45) x 4

Size (H x W x D) (mm) 166 x 250 x 237

Weight (kg) 4.92

Supported Client Windows 7 and 10

macOS 10.12 onward

File System Internal: Btrfs, ext4

External: Btrfs, ext4, ext3, FAT32, NTFS, HFS+, exFAT1

Supported RAID Type Basic JBOD RAID 0 RAID 1

RAID 5 RAID 6 RAID 10 Synology Hybrid RAID (2-Disk Fault Tolerance)

Agency Certification FCC Class B CE Class B BSMI Class B

EAC VCCI RCM RoHS Compliant

HDD Hibernation Yes

Scheduled Power On/Off Yes

Wake on LAN Yes

Language Localization

Environment Requirement

Line voltage: 100 V to 240 V AC Frequency: 50/60 Hz

Operating Temperature: 32 to 104F (0 to 40C) Storage Temperature: -5 to 140F (-20 to 60C)

Relative Humidity: 5% to 95% RH Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.

Hardware Specification

1 Support for exFAT can be enabled by purchasing and downloading exFAT Access in Package Center.

7 Chapter 1: Before You Start

Optional Accessories With Synology accessories, you can customize your Network Video Recorder to fit different business environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.

Memory Module

Model Name Picture Description

D4ECSO-2666-16G DDR4 ECC unbuffered SO-DIMM

Expansion Unit

Model Name Picture Description

DX517 5-bay 2.5"/3.5" SATA expansion

Note: Your Network Video Recorder supports up to two expansion units.

Spare Parts Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply units.

Model Name Picture Description

Disk Tray (Type D6) 3.5"/2.5" Drive Tray With Lock

FAN 120*25_5 System Fan 120*120*25 mm

PSU 250W_5 PSU 250W 24p+12p+8p

8 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Component Installation Please prepare the following tools and parts before setting up your Network Video Recorder: A screwdriver (only for 2.5" drives) At least one 3.5" or 2.5" SATA drive (please visit www.synology.com/compatibility for compatible drive

models)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation.

Install Drives 1 Press the lower part of the hard drive tray to unlock the handle.

2 Pull out the hard drive tray handle as shown below to remove the hard drive tray.

3 Load drives in the drive trays. For 3.5" drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

Hardware Setup

9

2 Chapter

10 Chapter 2: Hardware Setup

For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe place. Place the drive in the area of the drive tray indicated by a blue rectangle below. Turn the tray upside down and tighten the screws to secure the drive in place.

4 Insert the loaded hard drive tray into the empty hard drive bay and push it into position by the upper half of the handle.

Note: Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.

5 Press the handle back into the front panel until you hear a click to secure the hard drive tray in place. 6 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the

hard drive tray handle, and then remove the key.

7 Repeat the steps above to install the other drives you have prepared. 8 Drives are numbered as shown below.

1 2 3 4 Note: If you plan to create a RAID volume, we recommend installing drives of identical size to make the best use of drive capacity.

11 Chapter 2: Hardware Setup

Start Up Your Network Video Recorder 1 Use the LAN cable to connect the Network Video Recorder to your switch, router or hub. 2 Connect one end of the AC power cord to the power port of your Network Video Recorder. Connect the other

end to a power outlet.

3 Press the power button to turn on your Network Video Recorder.

Congratulations! Your Network Video Recorder is now online and detectable from a network computer.

12 Chapter 2: Hardware Setup

Expand the Memory of the Network Video Recorder Genuine Synology memory modules must be installed to ensure system compatibility and reliability. Failure to follow the configurations below for the suggested installation sequence of different memory capacities may prevent the system from booting successfully, and could impair system performance and stability.

SLOT 1 SLOT 2 SLOT 1 SLOT 2 Total Memory

4 GB 4 GB 8 GB

16 GB - 16 GB

16 GB 16 GB 32 GB

Note: It is required to use identical memory modules of the same capacity and frequency.

To expand the memory capacities of your Network Video Recorder, you must remove the two pre-installed 4 GB memory modules first, then install one or two 16 GB memory modules. Follow the steps below to remove, install, and check the memory modules on your Network Video Recorder.

To remove the memory module

1 Shut down your Network Video Recorder. Disconnect all cables from your Network Video Recorder to prevent possible damage.

2 The memory modules are located at the bottom of your Network Video Recorder. 3 Remove the two screws on the cover that protecting the modules. Lift up the cover and put it aside. You will

see two pre-installed 4 GB memory modules.

Note: When you remove the cover, sensitive internal components are exposed. Avoid touching anything other than the memory assembly when removing or adding memory.

13 Chapter 2: Hardware Setup

4 Push the levers on both sides of the memory module outward. The memory module will be released from its slot.

5 Hold the memory module by its edges and remove it from the slot. 6 Follow above steps to remove the other memory module. To install the memory module

1 Start from the slot 1, insert the new memory module into the empty slot: a Align the small gap between the gold connectors of the memory module with the notch on the empty slot.

Insert the memory module into the slot. Make sure that the module is properly inserted. b Gently push down the memory module until you hear a click.

14 Chapter 2: Hardware Setup

Note: Hold the memory module by its edges and avoid touching the gold connectors. When memory capacity is changed, the device will perform a memory check upon the next start up. This will

prolong the start-up time by up to ten minutes. This behavior is normal and will only occur once. Synology will not provide full product warranty or technical support if a non-Synology memory module is

used for memory upgrade.

2 If needed, repeat the steps above to install a second memory module into slot 2. 3 Replace the cover and tighten the two screws that removed. 4 Reconnect the cables that removed, then press the power button to turn on your Network Video Recorder. To make sure Network Video Recorder recognizes the new memory capacity 1 Install DiskStation Manager (DSM). Please see "Install DSM on Network Video Recorder" for more

information. 2 Sign in to DSM as admin or a user belonging to the administrators group. 3 Go to Control Panel > Info Center and check Total Physical Memory. If your Network Video Recorder does not recognize the memory or does not start up successfully, please make sure that the memory module is installed correctly.

Replace System Fan If the cooling fan located on the back of the Network Video Recorder malfunctions, please follow the steps below to remove the malfunctioning fan and replace it with a new one.

1 Power off your Network Video Recorder and remove the power cord. 2 Remove the four screws that secure the fan panel.

3 Remove the malfunctioning fan: a Pull out the fan panel from your Network Video Recorder. b Carefully unplug the power cord located at the bottom of the fan socket as shown below.

c Remove the screws that secure the fan guard and fan case from the malfunctioning fan.

3System Maintenance

Chapter

15

16 Chapter 3: System Maintenance

4 Install a new fan: a Attach the fan case (with the fan cable within the fan pointing at the bottom-right corner) and fan guard to the

new fan, then tighten the screws to secure the fan case and fan guard.

b Plug the fan cable into your Network Video Recorder as shown below.

5 Replace and tighten the four screws removed in step 2.

17 Chapter 3: System Maintenance

Initial Troubleshooting Guide We have selected several helpful articles on frequently asked questions to help you perform initial troubleshooting on your Network Video Recorder. To view the articles, please click the links provided below:

General What can I do to troubleshoot NAS connection problems? Why does my Synology NAS make unusual noises? How to reset my Synology NAS

Hard Disk Drive How to choose a suitable HDD for my Synology NAS/IP SAN How to diagnose drives' health status when receiving bad sector warning How to fix drive failure and retrieve the data from your drives What should I do if my Synology NAS cannot recognize installed drives? How do I know whether the problem is with my Synology NAS or drive when drive errors occur?

Memory Are there any requirements for installing or expanding system memory capacity? How can I run a memory test on my Synology NAS? Why is there a startup delay after a memory upgrade?

LED How do I recognize a hibernating Synology NAS via the LED indicators? What can I do if the STATUS LED keeps flashing orange? Why can't my Synology NAS be powered on and why is the POWER LED indicator blinking

constantly? Fan

What type of fan speed modes are available on my Synology NAS?

After hardware setup is completed, please install DiskStation Manager (DSM) Synologys browser-based operating system on your DVA3221.

Install DSM with Web Assistant Your DVA3221 comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DVA3221. To use Web Assistant, please follow the steps below.

1 Power on your DVA3221. 2 Open a web browser on a computer connected to the same network as the DVA3221. 3 Enter either of the following into the address bar of your browser:

a find.synology.com b synologynvr:5000

4 Web Assistant will be launched in your web browser. It will search for and find the Network Video Recorder within the local network. The status of the DVA3221 should be Not installed.

5 Click Connect to start the setup process and follow the onscreen instructions.

Note: The Network Video Recorder must be connected to the Internet to install DSM with Web Assistant. Recommended browsers: Chrome, Firefox. Both the Network Video Recorder and the computer must be in the same local network.

6 If you accidentally leave the installation process before it is finished, sign into DSM as admin (default administrative account name) with the password left blank.

Learn More Your DVA3221 is now ready for action. For more information or online resources about your DVA3221, please visit www.synology.com.

Install DSM on Network Video Recorder 4

18

Chapter

SYNOLOGY, INC. END USER LICENSE AGREEMENT

IMPORTANTREAD CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PURCHASED BY YOU (THE "PRODUCT"), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( "SOFTWARE").

YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY USING THE PRODUCTS CONTAINING THE SOFTWARE, INSTALLING THE SOFTWARE ONTO THE PRODUCTS OR DEVICE CONNECTED TO THE PRODUCTS. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT USETHE PRODUCTS CONTAINING THE SOFTWAREOR DOWNLOAD THE SOFTWARE FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY.INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.

Section 1. Limited Software License. Subject to the terms and conditions of this EULA, Synology grants you a limited, non- exclusive, non-transferable, personal license to install, run and use one copy of the Software loaded on the Product or on your device connected to the Product solely relating to your authorized use of the Product.

Section 2. Documentation. You may make and use a reasonable number of copies of any documentation provided with the Software; provided that such copies will only be used for internal business purposes and are not to be republished or redistributed (either in hard copy or electronic form) to any third party.

Section 3. Backup. You may make a reasonable number of copies of the Software for backup and archival purposes only.

Section 4. Updates. Any software provided to you by Synology or made available on the Synology website at www.synology.com ("Website") or any other channel provided by Synology that updates or supplements the original Software is governed by this EULA unless separate license terms are provided with such updates or supplements, in which case, such separate terms will govern.

Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA. Without limiting the foregoing, you shall not authorize or permit any third party to: (a) use the Software for any purpose other than that in connection with the Product; (b) license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Software; (c) reverse engineer, decompile, disassemble or attempt to discover the source code of or any trade secrets related to the Software, except and only to the extent that such conduct is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivative works of the Software; (e) remove, alter or obscure any copyright notice or other proprietary rights notice on the Software or Product; or (f) circumvent or attempt to circumvent any methods employed by Synology to control access to the components, features or functions of the Product or Software. Subject to the limitations specified in this Section 5, you are not prohibited from providing any services hosted by Synology NAS server to any third party for commercial purpose.

Section 6. Open Source. The Software may contain components licensed to Synology under the GNU General Public License ("GPL Components"), currently available at http://www.gnu.org/licenses/gpl.html. The terms of the GPL will control solely with respect to the GPL Components to the extent that this EULA conflicts with the requirements of the GPL with respect to your use of the GPL Components, and, in such event, you agree to be bound by the GPL with respect to your use of such components.

Section 7. Audit. Synology will have the right to audit your compliance with the terms of this EULA. You agree to grant Synology a right to access to your facilities, equipment, books, records and documents and to otherwise reasonably cooperate with Synology in order to facilitate any such audit by Synology or its agent authorized by Synology.

Section 8. Ownership. The Software is a valuable property of Synology and its licensors, protected by copyright and other intellectual property laws and treaties. Synology or its licensors own all rights, titles and interests in and to the Software, including but not limited to copyright and any other intellectual property rights.

Section 9. Limited Warranty. Synology provides a limited warrant that the Software will substantially conform to Synology's published specifications for the Software, if any, or otherwise set forth on the Website, for a period required by your local law. Synology will use commercially reasonable efforts to, in Synology's sole discretion, either correct any such nonconformity in the Software or replace any Software that fails to comply with the foregoing warranty, provided that you give Synology written notice of such noncompliance within the warranty period. The foregoing warranty does not apply to any noncompliance resulting from any: (w) use, reproduction, distribution or disclosure not in accordance with this EULA; (x) any customization, modification or other alteration of the Software by anyone other than Synology; (y) combination of the Software with any product, services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA.

Section 10. Support. During the period specified in the Section 9, Synology will make available to you the support services. Following the expiration of the applicable period, support for Software may be available from Synology upon written

request.

Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.

Section 12. Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Section 13. Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties, disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to you.

Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations.

Section 15. Termination. Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the Software and all of its component parts.

Section 16. Assignment. You may not transfer or assign your rights under this EULA to any third party, except for that pre- installed in the Products. Any such transfer or assignment in violation of the foregoing restriction will be void.

Section 17. Applicable Law. Unless expressly prohibited by local law, this EULA is governed by and construed in accordance with the laws of the country, in accordance with which Synology Inc. was organized without regard to any conflict of law principles to the contrary.

Section 18. Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this EULA will be resolved exclusively and finally by arbitration conducted by three neutral arbitrators in accordance with the procedures of the Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall take place in Taipei and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and you expressly and knowingly waive those rights and agree to resolve any disputes through binding arbitration in accordance with the provisions of this Section 18. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights.

Section 19. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.

Section 20. Severability. If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this EULA will remain in full force and effect.

Section 21. Entire Agreement. This EULA sets forth the entire agreement of Synology and you with respect to the Software and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether written or oral. No amendment, modification or waiver of any of the provisions of this EULA will be valid unless set forth in a written instrument signed by the party to be bound thereby.

Powered by TCPDF (www.tcpdf.org)

SYNOLOGY, INC.LIMITED PRODUCT WARRANTY

THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC.

AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND

AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR

USING THE PRODUCT. PLEASE BE ADVISED THAT THIS LIMITED WARRANTY DOES NOT APPLY TO THE SOFTWARE

CONTAINED IN THE PRODUCTS WHICH SHALL BE SUBJECT TO ITS END USER LICENSE AGREEMENT, AND THAT

SYNOLOGY RESERVES THE RIGHT TO MAKE ADJUSTMENTS AND/OR MODIFICATION TO THIS PRODUCT

WARRANTY FROM TIME TO TIME WITHOUT PROVIDING PRIOR NOTICE TO YOU. IF YOU DO NOT AGREE TO THE

TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE

RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE

RETURN POLICY.PLEASE NOTE THAT SYNOLOGYS WARRANTY SUPPORTS ARE NOT AVAILABLE IN EVERY

COUNTRY, AND THAT SYNOLOGY MAY REFUSE TO PROVIDE THIS LIMITED WARRANTY SUPPORTS TO YOU IF YOU

REQUEST SUCH SUPPORTS NOT AT THE COUNTRY AT WHICH THE PRODUCT WAS ORIGINALLY PURCHASED. THE

COUNTRY AT WHICH THE PRODUCT WAS ORIGINALLY PURCHASED SHALL BE DETERMINED BASED ON THE

SYNOLOGYS INTERNAL RECORDS.

Section 1. Products

(a) "Products" refer to New Products or Refurbished Products.(b) "New Product" means the Synology-branded hardware

product and Synology-branded accessories contained in the original packaging Customer bought from an authorized Synology

distributor or reseller. You may see our New Product at https://www.synology.com/products/status.(c) "Refurbished Product"

means all Synology products which have been refurbished by Synologys affiliate or an authorized Synology distributor or

reseller, not including those sold as "as is" or with "no warranty" by anyone.(d) Other definition: "Customer" means the original

person or entity purchasing the Product from Synology or an authorized Synology distributor or reseller; "Online Store" means

an online shop operated by Synology or Synologys affiliate; "Software" means the Synology proprietary software that

accompanies the Product when purchased by Customer, is downloaded by Customer from the Web Site, or is pre-installed on

the Product by Synology, and includes any firmware, associated media, images, animations, video, audio, text and applets

incorporated into the software or Product and any updates or upgrades to such software.

Section 2. Warranty Period

(a) "Warranty Period": The warranty period commences on the purchase date is shown on the purchase receipt or invoice to be

presented by Customer and ending at the day after the end of the Warranty Period for each New Product. You may see the

Warranty Period for each New Product at https://www.synology.com/products/status. For the Refurbished Product or repaired

parts, it's the remainder of the warranty period of the product they are replacing, or ninety (90) days from the date the product

was replaced or repaired, whichever is longer; except for those sold as "as is" or with "no warranty" by any stores. Without

presenting such purchase receipt or invoice, the warranty period shall commence on the date of manufacture based on our

internal record.(b) "Extended Warranty Period": For Customer purchasing EW201/ EW202 optional service for applicable

Products specified in Section 1 (b), the Warranty Period specified in Section 2 (a) of the applicable Product registered with

EW201/EW202 optional service will be extended by two years. You may see the applied model at

https://www.synology.com/products/Extended_Warranty.

Section 3. Limited Warranty and Remedies

3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material

defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published

specifications for the Product during the Warranty Period. Such limited warranty does not apply to the Software contained in

the product or purchased by Customer which shall be subject to the accompanying end user license agreement provided with

the Product. Synology provides no warranty to Refurbished Product sold as "as is" or with "no warranty". This Limited Warranty

is NOT transferable and applies only to the customers who directly purchase products from Synologys affiliate, the resellers,

and distributor that Synology authorized. The warranty set forth in Section 3 will terminate upon Customer's sale or transfer of

the Product to a third party.

3.2 Exclusions. The foregoing warranties and warranty obligations do not apply to any Product that (a) has been installed or

used in a manner not specified or described in the Product or its related documents (b) has been damaged by service

(including upgrades and expansions) performed by anyone who is not a representative of Synology or any Synology

Authorized Service Provider; (c) has been in any way misused, abused, or damaged; (d) has been used with items not

provided by Synology other than the hardware or software for which the Product is designed; or (e) otherwise fails to conform

to the Product specifications and such failure is attributable to causes not within or under Synology's control. (f) has been tie-in

any non-Synology branded hardware products or any software, even if packaged or sold with Synology hardware. (g)

Customer disassembles the Product except as authorized by Synology; (h) Customer fails to implement any correction,

modification, enhancement, improvement or other update made available to Customer by Synology; or (i) Customer

implements, installs or uses any correction, modification, enhancement, improvement or other update made available by any

third party. (j) Any compatibility issues occurred when installing hardware products, software, or components not supported by

Synology. (k) product damage caused by accident, fire, liquid contact, earthquake or other external cause. (l) cosmetic damage

caused by normal wear and tear or otherwise due to the normal aging of the Product, including but not limited to scratches,

dents and broken plastic on ports unless failure has occurred due to a defect in materials or workmanship; (m) serial number

has been removed or defaced from Product, resulting in not able to identify.

3.3 Warranty Support and Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties set forth

in Section 3.1 within the applicable Warranty Period in the manner set forth below, then, upon verification of the noncompliance

by Synology, Synology will, at Synology's option: (a) use commercially reasonable efforts to repair the Product, (b) provide

technical support, or (c) replace the noncomplying Product or part thereof upon return of the complete Product in accordance

with Section 3.4 The foregoing sets forth Synology's entire liability and Customer's sole and exclusive remedy for any breach of

warranty under Section 3.1 or any other defect or deficiency in the Product. Customer will reasonably assist Synology to

diagnose and validate any nonconformity with the Product.

3.4 Return. Any Product return by Customer under Section 3.3 must be made in accordance with Synology's then-current

return procedures with the purchase receipt or invoice. You may see more information about return procedure at

https://www.synology.com/knowledgebase/DSM/tutorial/Service_Application/How_to

_make_warranty_claim_for_Synology_NAS, for warranty claims, Customer must return the complete Product to Synology in

accordance with this Section 3.4. Any Product returned that has been disassembled (except under the direction of Synology)

will be refused and returned to Customer at Customer's expense. Any Product must be returned in the same condition as it

was received from Synology to the address designated by Synology, freight pre-paid, in packaging sufficient to protect the

contents thereof. Customer is responsible for insurance and risk of loss with respect to returned items until they are properly

received by Synology.

3.5 Replacement by Synology. If Synology elects to replace any Product under this Warranty set forth in Section 3.1, then

Synology will ship a replacement Product at Synology's expense via the shipping method selected by Synology after receipt of

the nonconforming Product returned in accordance with Section 3.4 and validation by Synology that the Product does not

conform to the warranty. In some countries, Synology may at its own discretion apply the Synology Replacement Service to

certain Products, through which Synology will ship a replacement Product to Customer before its receipt of the nonconforming

Product returned by Customer ("Synology Replacement Service").

3.6 Disclaimer of Warranties. THE WARRANTIES, OBLIGATIONS, AND LIABILITIES OF SYNOLOGY AND THE

REMEDIES OF CUSTOMER SET FORTH IN THIS WARRANTY ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND

CUSTOMER HEREBY WAIVES, RELEASES AND DISCLAIMS, ALL OTHER WARRANTIES, OBLIGATIONS AND

LIABILITIES OF SYNOLOGY AND ALL OTHER RIGHTS, CLAIMS AND REMEDIES OF CUSTOMER AGAINST SYNOLOGY,

EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO THE PRODUCT, ACCOMPANYING

DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES DELIVERED UNDER THIS WARRANTY,

INCLUDING, BUT NOT LIMITED TO ANY: (A) IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE OR USE; (B) IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF

DEALING, OR USAGE OF TRADE; (C) CLAIM OF INFRINGEMENT OR MISAPPROPRIATION; OR (D) CLAIM IN TORT

(WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY OR OTHER THEORY). SYNOLOGY

MAKES NO GUARANTEE AND SPECIFICALLY DISCLAIMS ANY WARRANTY THAT THE DATA OR INFORMATION

STORED ON ANY SYNOLOGY PRODUCT WILL BE SECURE AND WITHOUT RISK OF DATA LOSS. SYNOLOGY

RECOMMENDS THAT CUSTOMER TAKES APPROPRIATE MEASURES TO BACK UP THE DATA STORED ON THE

PRODUCT. SOME STATES/JURISDICTIONS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE

LIMITATION MAY NOT APPLY TO CUSTOMER.

Section 4. Limitations of Liability

4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on

account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its

reasonable control (including, without limitation, any act or failure to act by Customer).

4.2 Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS SUPPLIERS BE LIABLE FOR THE COST OF

COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR

LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT

OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY

ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER

THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR

OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

4.3 Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE

OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER

GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT ACTUALLY PAID BY

CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUSTOMER MAY INCUR AND

WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The

foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law.

The laws of some states/jurisdictions do not allow exclusion or limitation of certain damages. To the extent that those laws

apply to the Product, the exclusions and limitations set forth above may not apply to Customer.

Section 5. Miscellaneous

5.1 Proprietary Rights. The Product and any accompanying Software and documentation provided with the Product include

proprietary and intellectual property rights of Synology and its third party suppliers and licensors. Synology retains and

reserves all right, title, and interest in the intellectual property rights of the Product, and no title to or ownership of any

intellectual property rights in or to the Product, any accompanying Software or documentation and any other goods provided

under this Warranty is transferred to Customer under this Warranty. Customer will (a) comply with the terms and conditions of

the Synology end user license agreement accompanying any Software furnished by Synology or an authorized Synology

distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or

otherwise misappropriate, circumvent or violate any of Synology's intellectual property rights.

5.2 Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise,

without the prior written consent of Synology.

5.3 No Additional Terms. Except as expressly permitted by this Warranty, neither party will be bound by, and each party

specifically objects to, any term, condition or other provision that conflicts with the provisions of this Warranty that is made by

the other party in any purchase order, receipt, acceptance, confirmation, correspondence or otherwise, unless each party

specifically agrees to such provision in writing. Further, if this Warranty conflicts with any terms or conditions of any other

agreement entered into by the parties with respect to the Product, this Warranty will prevail unless the other agreement

specifically references the sections of this Warranty that it supersedes.

5.4 Applicable Law. Unless explicitly prohibited by local law, this Warranty is governed by the laws of the State of

Washington, U.S.A. for the Customers residing within the United States; and by the laws of the Republic of China (Taiwan) for

Customers not residing within the United States, without regard to any conflict of law principles to the contrary. The 1980 U.N.

Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.

5.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services

provided by Synology with respect to the Product or the relationship between Customers residing within the United States and

Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration

Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited

solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any

other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County,

Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the

request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall

receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision

rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any

court of competent jurisdiction. Customer understands that, in the absence of this provision, Customer would have had a right

to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action

basis, and Customer expressly and knowingly waives those rights and agrees to resolve any disputes through binding

arbitration in accordance with the provisions of this Section 5.5. For Customers not residing within the United States, any

dispute, controversy or claim described in this section shall be finally resolved by arbitration conducted by three neutral

arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall

take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree,

in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having

jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking

such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this

Warranty relating to Synology's intellectual property rights.

5.6 Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this

Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and

reasonable attorneys' fees.

5.7 Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with all

applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration

Regulations.

5.8 Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or

unenforceable, the remainder of this Warranty will remain in full force and effect.

5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements,

between Synology and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the

provisions of this Warranty will be valid unless set forth in a written instrument signed by the party to be bound thereby.

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

B

Manualsnet FAQs

If you want to find out how the DVA3221 Synology works, you can view and download the Synology DVA3221 v2 Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Synology DVA3221 as well as other Synology manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Synology DVA3221. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Synology DVA3221 v2 Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Synology DVA3221 v2 Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Synology DVA3221 v2 Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Synology DVA3221 v2 Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Synology DVA3221 v2 Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.