Summary of Content for Synology RS10613xs+ v2 Quick Installation Guide PDF
Synology RackStation RS10613xs+ Quick Installation Guide
Table of Contents
Chapter 1: Before You Start Package Contents ............................................................................................................................................... 3 Synology RackStation at a Glance ...................................................................................................................... 4 Safety Instructions ............................................................................................................................................... 6
Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation ........................................................................................................... 7 Install Hard Disks and SSD ................................................................................................................................. 7 Add a RAM Module to RackStation ..................................................................................................................... 9 Add a Network Interface Card to RackStation ................................................................................................... 11 Replace a Malfunctioning Fan ........................................................................................................................... 13 Start Up Your RackStation ................................................................................................................................ 15 LCM Display ...................................................................................................................................................... 16
Chapter 3: Install DSM on RackStation Install from Windows ......................................................................................................................................... 17 Install from Mac OS X ....................................................................................................................................... 19 Install from Linux ............................................................................................................................................... 19 Learn More ........................................................................................................................................................ 21
Appendix A: Specifications
Appendix B: LED Indication Table
Chapter 1: Before You Start
Before you start setting up your RackStation, please check the package contents to verify that you have received the items below. Please also read the safety instructions carefully before use to prevent your RackStation from any damage.
Package Contents Main Unit x 1 AC Power Cord x 2
Installation Disc x 1
Screws for 3.5" Hard Drives x 52
Screws for 2.5" Hard Drives x 52
Screws for 2.5 SSD x 10
4 Chapter 1: Before You Start
Synology RackStation at a Glance
No. Article Name Location Description
1) Power Button Front Panel Press to turn RackStation on and off. Press the Power Button and hold until you hear a beep sound and the Power LED starts blinking.
2) LCM Display Front Panel Displays server name, network information, hardware malfunction alerts, and provides basic controls. For more information, see LCM Display on Page 16.
3) LED Indicators Front Panel The LED indicators display the status of internal disks and the system. For more information, see Appendix B: LED Indication Table on Page 23.
4) SSD Trays Behind LCM Panel
Install SSD (Solid State Drive) here for SSD cache usage. (Pull handle marked above to open LCM panel and access SSD trays.)
5) Hard Drive Trays Front Panel Install hard disks here for usage with your Synology RackStation.
6) Escape/Up/Down/Enter Front Panel Use these buttons to navigate info menus on the LCM display. For more information, see LCM Display on Page 16.
7) Fan Back Panel Fans dispose of excessive heat from the power supply. In the event a fan malfunctions, your RackStation will emit a beeping sound every few seconds.
8) Power Supply On/Off Switch Back Panel Press to turn on/off the power supply.
9) Power Supply Safety Latch Back Panel
The power supply safety latch is used to secure the power supply in place.
10) Beep Off Back Panel Press to deactivate beep sound when malfunctions occur.
11) Redundant Power LED Back Panel Displays status of redundant powers supplies, alerting the user of power supply or fan failure.
12) LAN Ports Back Panel For connecting RJ-45 cables to your Synology RackStation.
13) Power Supply Safety Panel Back Panel Remove screws and panel before removing power supply.
14) Power LED Back Panel Displays Power Supply On/Off/Shutting down
15) Power Port Back Panel Connect power cords here to supply power to your RackStation
16) Console Port & VGA Port Back Panel For manufacturing use only.
5 Chapter 1: Before You Start
No. Article Name Location Description
17) USB Port Back Panel Connect external hard drives, USB printers, or other USB devices to your Synology RackStation.
18) LAN LED Back Panel Displays network status of each LAN port. Each LAN port has two individual LEDs.
19) Expansion Ports Back Panel Connect Synology Expansion Units1
to your Synology RackStation.
RESET Button Back Panel 1. Press and hold to restore IP, DNS, passwords for the admin account
to default value. 2. Press and hold to reinstall software on your Synology RackStation.
--------- 1 For more information about Synology Expansion Unit supported by your RackStation, visit www.synology.com.
6 Chapter 1: Before You Start
Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity.
Keep Synology product in a correct, secure position.
Do not place the Synology product close to any liquid.
Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do not use chemical or aerosol cleaners to clean it.
Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the product from falling over.
The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage is correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation A screwdriver At least one 3.5 or 2.5 SATA hard disk
(Please visit www.synology.com for compatible hard disk models)
Warning: If you install a hard disk that contains data, the system will format the hard disk and erase all data. Please back up any important data before installation.
Install Hard Disks and SSD Before using your Synology RackStation to store or share data, please install at least one hard disk. In addition, RackStation offers the option to install SSD (Solid State Drives) in order to boost cache read performance. This section will guide you through the process of installing hard disks and SSD on your Synology RackStation.
Install Hard Disks 1 Find the small button located on the hard drive tray handle. Press the button down and pull the hard drive tray
handle out as illustrated below.
2 Remove the hard drive tray and place the hard disk in as follows:
3.5 Hard Disks: Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws into the four spots indicated below to secure the hard disk.
8 Chapter 2: Hardware Setup
2.5 Hard Disk: Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws into the four spots indicated below to secure the hard disk.
3 After securing the hard disk and tray, insert both into the empty hard drive bay.
Important: Make sure the hard drive tray is completely inserted. Otherwise, the hard disk might not function properly.
4 Push the handle to secure the hard drive tray.
5 Repeat the steps above to install all prepared hard disks.
6 Hard disk positions are numbered as shown below.
Note: If you want to set up a RAID configuration, we recommended all installed hard disks be the same size in order to optimize hard disk capacity usage.
Install SSD 1 Pull the small lever located beside the LCM display in the direction indicated below to access the SSD bay.
9 Chapter 2: Hardware Setup
2 Place your SSD in the SSD tray. Insert and tighten four screws into the four spots indicated below to secure the SSD.
3 After securing the SSD and tray, insert both into the empty SSD bay.
Important: Make sure the SSD tray is completely inserted. Otherwise, your SSD might not function properly.
4 Repeat the above steps to install a second SSD.
5 Close and secure the LCM display.
Note: In order to mount SSD cache, you must install two SSD of the same model and size. Please visit www.synology.com for a complete compatibility list.
Add a RAM Module to RackStation Synology offers RAM modules (4GB/8GB) which allow you to expand the memory capacity of your RackStation. To install, check, or remove your RAM module, please follow the steps below.
Install a RAM Module 1 Shut down your RackStation, and disconnect all connected cables to prevent any possible damage.
Important: Before installing the RAM module, please wait for at least 30 seconds after detaching the power cord(s) from the RackStation to ensure complete discharge. Also, please remove any static electricity before installation by touching water pipes, a metal conduit, or another person to get rid of excess charge and avoid damaging the motherboard, peripherals, and other components.
10 Chapter 2: Hardware Setup
2 Remove the two screws located on the back of your RackStation. Then pull the top cover in the direction indicated below and lift.
Important: Removing the cover will expose sensitive internal components to possible harm. Please avoid touching any other components when adding or removing memory.
3 To access the memory slot, follow the steps below:
a Remove the screws from the support bracket as illustrated below.
b Remove the support bracket.
c Lift the air duct upwards.
4 To insert the new memory module, follow the steps below:
a Release the ejectors on the memory slot by pushing them outwards.
b Align the notch on the gold edge of the module with the notch in the memory slot.
c Use two fingers to apply firm, even pressure and push the memory module downward.
d When the memory is inserted correctly, the ejectors will snap into place.
Important: To avoid damaging the memory module, please hold it by the edges and do not touch the gold connectors.
11 Chapter 2: Hardware Setup
5 Replace the top cover, slide it into place, and tighten the two screws on the back of your RackStation.
Make Sure RackStation Recognizes New Memory Capacity After installing a new memory module in your RackStation, we recommended checking whether the system recognizes the new memory.
To check the memory of your RackStation: 1 Start up your RackStation. (See Start Up Your RackStation on Page 15 for more information.)
2 Install DSM. (See Chapter 3: Install DSM on RackStation on Page 17 for more information.)
3 Log in to Synology DiskStation Manager (DSM).
4 Check Total Physical Memory in Main Menu > System Information.
If your RackStation does not recognize the memory or does not start up correctly, please make sure the memory was correctly installed.
Remove a RAM Module from RackStation 1 Follow steps 1 and 2 of Install a RAM Module to remove the cover from your RackStation.
2 To remove the RAM module, follow the steps below:
a Release the ejectors on the memory slot by pushing them toward the sides.
b Hold the memory module by the edges and remove it from the slot.
3 Replace the top cover, slide it into place, and tighten the two back screws.
Add a Network Interface Card to RackStation Your RackStation contains a PCI Express expansion slot which allows you to install a 10G/E or Gigabit network interface card for LAN port expansion.1
--------- 1 For more information about supported 10G/E or Gigabit network interface cards, visit
Before installing the card on your RackStation, you must replace the longer bracket (for PC usage) on your network interface card with the shorter bracket (for RackStation usage).
12 Chapter 2: Hardware Setup
To replace the long bracket with the short one: 1 Remove the two screws holding the longer bracket to the interface card. Then remove the bracket as indicated
2 Replace the longer bracket with the shorter one from your RackStation. Then tighten the two screws to secure the shorter bracket.
To install the network interface card: 1 Follow steps 1 to 2 of Install a RAM Module on Page 9 to remove the cover from your RackStation.
2 To install the network interface card, follow the steps below:
a Remove the screw on the port access cover. Then remove the access cover.
b Align the card connector with the expansion slot and insert the card into the slot.
Important: Make sure the connector is completely inserted. Otherwise, the network interface card might not function properly.
c Tighten the screw to secure the network interface card.
13 Chapter 2: Hardware Setup
Replace a Malfunctioning Fan Your Synology RackStation comes equipped with multiple cooling fans. In the event of a fan malfunction, your RackStation will emit a beeping sound. This section will guide you through the steps necessary to replace a malfunctioning fan.
To replace a malfunctioning fan, please follow the instructions below: 1 Follow steps 1 to 2 of Install a RAM Module on Page 9 to remove the cover from your RackStation. Fans are
numbered as follows:
2 Find the malfunctioning fan. Lift the fan upward to remove.
3 Apply firm pressure to the power plug and slide it off the power port as shown below.
14 Chapter 2: Hardware Setup
4 Remove the malfunctioning fan from the fan casing.
5 Slide a new fan into the casing.
6 Apply firm pressure and slide the power cord onto the power port.
7 Slide the new cooling fan unit into your RackStation. Make sure the power port is aligned properly.
15 Chapter 2: Hardware Setup
Start Up Your RackStation 1 Connect one end of the power cord to the power port located on the back of your RackStation and the other
end to a power outlet. Make sure the Power Supply On/Off Switch is turned on ("|").
Note: Your RackStation comes equipped with a redundant power supply system, allowing two power cords to be connected. The system may be power on with only one power cord, but we recommend using two power cords to avoid unexpected power failures.
2 Connect one end of the LAN cable to one of the LAN ports located on the back of your RackStation and the other end to your switch/router/hub.
3 Push the Power button illustrated below to turn on your RackStation.
Congratulations! Your RackStation should now be online and detectable from a computer within the same network.
16 Chapter 2: Hardware Setup
LCM Display The LCM display located on the front panel of your RackStation shows network information, displays event alerts in case hardware or system malfunctions occur, and offers basic controls. Menus can be navigated by pressing the Escape/Up/Down/Enter buttons. Under normal circumstance, the LCM display will show the hostname and IP address of your RackStation, as illustrated below:
Event Display In the event your RackStation detects missing or malfunctioning hardware, the LCM display will show an event message. These event messages will alert you to various issues, such as overheating hardware, failed connections, or missing hard disks. When a problem occurs, please return to the deactivate beep page and press the Enter button to deactivate the beeping sound.
Info Menu Navigate the LCM info menus using the following buttons located on the front panel:
Escape Go back or cancel.
Up/Down Navigate up or down through menus.
Enter Confirm or select.
From the main display, pressing Enter will present the following three menus:
1. System Info Displays model name, serial number, date and time, and current software version.
2. Network Provides options to edit network related settings.
3. Reboot Press Enter to reboot your RackStation system.
Chapter 3: Install DSM on RackStation
Using a computer within the same network, follow the steps in this chapter to install DSM on your RackStation. After DSM is installed, you will be able to manage all features on your RackStation by logging in to DSM with your preferred web browser.
Install from Windows 1 Insert the DSM installation disc included with your RackStation into your computer, and click Start. Follow the
onscreen instructions to complete the setup process.
2 Synology Assistant will be installed and launched on your computer. It will search and find your RackStation within the LAN. The status of your RackStation should be Not installed. Double-click your RackStation to start the setup process.
4.1-2636 RS10613xs+ A5GA RackStation
18 Chapter 3: Install DSM on RackStation
3 Click Browse to locate the DSM_[model name]_[number].pat installation file in the DSM folder of your installation disc. You can also download the latest version of DSM from Synology Download Center.
4 Follow the onscreen instructions to complete the setup process.
After the installation process is finished, you will be able to manage your RackStation with Synology DiskStation Manager (DSM). For more information about managing your RackStation with DSM, refer to Synology DiskStation Users Guide available at Synology Download Center.
19 Chapter 3: Install DSM on RackStation
Install from Mac OS X 1 Insert the installation disc into your computer. Then double-click the SynologyInstall icon on the desktop.
2 In the window that appears, double-click the MacOSX folder, and then double-click Synology Assistant- [number].dmg.
3 Double-click the Synology Assistant.app in the window that appears.
4 Follow step 2 to 4 of the Install from Windows section to finish setup.
Install from Linux The Linux version is optimized for Ubuntu distribution version 8 and 9. However, you may still try installation on other Linux distributions (for evaluation purpose only).
Install and Run Synology Assistant You can install and run Synology Assistant using the command lines or the GUI.
If you want to install using the command lines: Run the script install.sh in the Linux folder of the installation disc, which will guide you through the steps below.
1 Remove the beta version of Synology Assistant (if any).
sudo rm -rf /usr/local/Synology /usr/local/bin/SynologyAssistant
2 Extract SynologyAssistant-[number].tar.gz to the directory you want, such as /usr/local or .
tar -C ./ -zxvf SynologyAssistant-[number].tar.gz
3 If you are using 64bit Ubuntu, install the 32bit libraries.
sudo apt-get install ia32-libs
20 Chapter 3: Install DSM on RackStation
4 Create the shortcut to /usr/local/bin.
sudo ln -sf /path/install/SynologyAssistant/SynologyAssistant \
5 To run Synology Assistant, you can either use the following command:
Or run the shortcut:
If /usr/local/bin exists in your environment variable $PATH, just type:
If you want to install using the GUI: 1 Go to /usr/local and /usr/local/bin and delete the following folders (if any):
Synology, SynologyAssistant 2 Insert the installation disc into your computer, and then double-click the SynologyInstall icon on the desktop.
3 In the File Browser window that appears, double-click the Linux folder, and then double-click Synology Assistant-[number].tar.gz.
21 Chapter 3: Install DSM on RackStation
4 Click Extract, and then extract the SynologyAssistant directory to /usr/local or any other path.
Important: If you are using 64bit Ubuntu, you have to install the 32bit libraries before proceeding. To install, type the following command in Terminal:
sudo apt-get install ia32-libs
5 Go to /usr/local/SynologyAssistant (or [the path you just specified]/SynologyAssistant), double-click SynologyAssistant, and then select Run in Terminal in the dialog box that appears.
Install DSM on RackStation When you have activated Synology Assistant, follow steps 2 to 4 of the Install from Windows section to finish setup.
Learn More Congratulations! Your RackStation is now set up. Refer to the Users Guide in the installation disc for advanced settings and management. For more information or online resources about your RackStation, please visit www.synology.com.
3.2-1955 4.1 2636
Appendix A: Specifications
Internal HDD 3.5" or 2.5" SATA 6G / SAS 6G X 10
Max. Capacity 40TB (10 X 4TB hard drives)
Hot Swappable HDD Yes
External HDD Interface USB 2.0 X 4
Expansion port X 2 (mini-SAS SFF8088)
LAN Port Gigabit X 4 (optional 10GbE X 2 add-on card is supported)
Size (HxWxD) (mm) 88 X 445 X 570
Weight (Kg) 15.685
Windows XP onward
Mac OS X 10.5 onward
Ubuntu 9.04 onward
Max. User Accounts 4096
Max. Group Accounts 512
Max. Shared Folders 512
Max. Concurrent Connections 1024
Max. Supported IP Cameras 70 (with 10 GbE add-on card)
File System EXT4
EXT3FATNTFS (External Disk, Read/Write)
Supported RAID Type Basic JBOD RAID 0 RAID 1 RAID 5 RAID 6RAID 10
Global Hot Spare Supported RAID Type RAID 1RAID 5RAID 6RAID 10
Agency Certifications FCC Class A CE Class A BSMI Class A
HDD Hibernation Yes
Deep Sleep for Expansion Unit No
Scheduled Power On/Off Yes
Wake on LAN Yes
Language Localization English Deutsch Franais Italiano Espaol Dansk Norsk Svensk
Nederlands Polski Magyar Portugus do Brasil Portugus Europeu Trke esk
Power Consumption And Environment Requirements
Line voltage: 100V to 240V AC Frequency: 50/60Hz
Operating Temperature: 40 to 95F (5 to 35C) Storage Temperature: 15 to 155F (-10 to 70C)
Relative Humidity: 5% to 95% RH Maximum Operating Altitude: 6500 feet (2000 m)
Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.
Appendix B: LED Indication Table
LED Indication Color Status Description
Green Static Volume Normal
Off HDD Hibernation
Static Available volume space < 1GB
Available volume space < 1 %
Blinking Volume degraded or crashed
Back LAN LED (Left) Orange
Static Network is normal
Blinking Network is active
Off Network is down
Back LAN LED (Right) Green Static Gigabit is normal
Orange Static 10/100 Link
Off Network is down
Disk Status/Activity Indicator (on tray)
Green Static Disk ready
Blinking Disk is being accessed
Orange Static Cannot Read/ Write
Off No internal disk
Power LED Blue
Static Power ready
Blinking Booting up
Off Power off
Redundant Power LED Green
Static Both power supplies are working
Blinking 1 power supply is not working or fan is not working
Off Power off
Orange Static Power Supply On/Off Switch is on ("|") but
RackStation System Power on the front panel is off (0)
Blinking System fan is not working
Off System fan normal
Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.
SYNOLOGY, INC. END USER LICENSE AGREEMENT
IMPORTANTREAD CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE" OR ELECTRONIC DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE") AVAILABLE FOR DOWNLOAD AT WWW.SYNOLOGY.COM OR PROVIDED WITH OR INSTALLED ON A SYNOLOGY PRODUCT (THE "PRODUCT").
YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY OPENING THE PACKAGE CONTAINING THE SOFTWARE, INSTALLING THE SOFTWARE NOT OTHERWISE PRE-INSTALLED BY SYNOLOGY ON A PRODUCT OR OTHERWISE USING A PRODUCT THAT INCLUDES PRE-INSTALLED SOFTWARE. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT OPEN THE BOX CONTAINING THE PRODUCT, INSTALL THE SOFTWARE OR USE THE PRODUCT CONTAINING THE SOFTWARE. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.
Section 1. Limited Software License. Subject to the terms and conditions of this EULA, Synology grants you a limited, non-exclusive, non-transferable, personal license to install, run and use one copy of the Software on the Product solely in connection with your authorized use of the Product.
Section 2. Documentation. You may make and use a reasonable number of copies of any documentation provided with the Software; provided, that such copies will only be used for internal business purposes and are not to be republished or redistributed (either in hard copy or electronic form) to any third party.
Section 3. Backup. You may make a reasonable number of copies of the Software for backup and archival purposes.
Section 4. Updates. Any software provided to you by Synology or made available on the Synology web site at www.synology.com ("Web Site") that updates or supplements the original Software is governed by this EULA unless separate license terms are provided with such updates or supplements, in which case, such separate terms will govern.
Section 5. License Limitations. The license set forth in Section 1 applies only to the extent you have ordered and paid for the Product and it states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA. Without limiting the foregoing, you will not, and you will not authorize or permit any third party to: (a) use the Software for any purpose other than in connection with the Product; (b) license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Software or use the Software in any commercial hosted or service bureau environment; (c) reverse engineer, decompile, disassemble or attempt to discover the source code for or any trade secrets related to the Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivative works of the Software; (e) remove, alter or obscure any copyright notice or other proprietary rights notice on the Product; or (f) circumvent or attempt to circumvent any methods employed by Synology to control access to the components, features or functions of the Product or Software.
Section 6. Open Source. The Software may contain components licensed to Synology under the GNU General Public License ("GPL Components"), currently available at http://www.gnu.org/licenses/gpl.html. The terms of the GPL will control solely with respect to the GPL Components to the extent that this EULA conflicts with the requirements of the GPL with respect to your use of the GPL Components, and, in such event, you agree to be bound by the GPL with respect to your use of such components.
Section 7. Audit. Synology will have the right to audit your compliance with the terms of this EULA. You agree to grant access to Synology to facilities, equipment, books, records
and documents and to otherwise reasonably cooperate with Synology in order to facilitate any such audit.
Section 8. Ownership. The Software is valuable property of Synology and its licensors and is protected by copyright and other intellectual property laws and treaties. Synology or its licensors own all right, title and interest in and to the Software and all copyright and other intellectual property rights in the Software.
Section 9. Limited Warranty. Synology warrants that for a period of ninety (90) days after either your (a) installation of the Software on Products that do not include pre-installed Software or (b) use of a Product that includes pre-installed Software, as applicable, (the "Warranty Period"), the Software will substantially conform to Synology's published specifications for the Software, if any, or otherwise set forth on the Web Site. Synology will use commercially reasonable efforts to, in Synology's sole discretion, either correct any such nonconformity in the Software or replace any Software that fails to comply with the foregoing warranty, provided that you give Synology written notice of such noncompliance within the Warranty Period. The foregoing warranty does not apply to any noncompliance resulting from any: (w) use, reproduction, distribution or disclosure not in accordance with this EULA; (x) any customization, modification or other alteration of the Software by anyone other than Synology; (y) combination of the Software with any product, services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA.
Section 10. Support. During the Warranty Period, Synology will make available to you the support services. Following the expiration of the applicable Warranty Period, support for Software may be available from Synology upon written request.
Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, SYNOLOGY AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.
Section 12. Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR THE COST OF COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR
INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Section 13. Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties, disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to you.
Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations.
Section 15. U.S. Government License Rights. All Software provided to the U.S. Government is provided with the commercial license rights and restrictions described in this EULA. By installing, copying or using the Software, the U.S. Government agrees that the Software is "commercial computer software" or "commercial computer software documentation" within the meaning of FAR Part 12.
Section 16. Termination. Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the Software and all of its component parts.
Section 17. Assignment. You may not transfer or assign your rights under this EULA to any third party. Any such transfer or assignment in violation of the foregoing restriction will be void.
Section 18. Applicable Law. Unless expressly prohibited by local law, this EULA is governed by the laws of the State of Washington, U.S.A. without regard to any conflict of law principles to the contrary. The 1980 U.N. Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.
Section 19. Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Software or services provided by Synology with respect to the Software or the relationship between you and Synology
will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association if you reside in the United States, except as otherwise provided below. In such cases, the arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class- wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class- action basis, and you expressly and knowingly waives those rights and agrees to resolve any disputes through binding arbitration in accordance with the provisions of this Section 19. If you do not reside within the United States, any dispute, controversy or claim described in this Section shall be finally resolved by arbitration conducted by three neutral arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights.
Section 20. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.
Section 21. Severability. If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this EULA will remain in full force and effect.
Section 22. Entire Agreement. This EULA sets forth the entire agreement of Synology and you with respect to the Software and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether written or oral. No amendment, modification or waiver of any of the provisions of this EULA will be valid unless set forth in a written instrument signed by the party to be bound thereby.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY
THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.
Section 1. Definitions. (a) New Product, including: (1) "Category I Product" means Synology product models RS810+, RS810RP+, and RX410 (2) "Category II Product" means Synology product models RS3411xs, RS3411RPxs, RS2211RP+, RS411, RS409RP+, RS409+, RS409, RS408- RP, RS408, RS407, DS3611xs, DS2411+, DS1511+, DS1010+, DS710+, DS509+, DS508, RX1211, RX1211RP, RX4, DX1211, DX510, DX5, VS240HD and RAM Module (1GB/2GB/4GB/8GB). (3) Category III Product means Synology product models that apply with the following requirements: 12 and newer DS, DX series products with 5- bay and above, or 12 and newer RS, RX series products. (4) "Category IV Product" means all other Synology product models purchased by Customer after March 1, 2008. (5) "Category V Product" means all other Synology product models purchased by Customer before February 29, 2008. (b) Refurbished Product means all Synology products which have been refurbished and sold directly by Synology through Online Store, not including those sold by an authorized Synology distributor or reseller. (c) "Customer" means the original person or entity purchasing the Product from Synology or an authorized Synology distributor or reseller. (d) "Online Store" means a online shop operated by Synology or Synologys affiliate. (e) "Product" means a New Product or a Refurbished Product and any hardware incorporated into the Product by Synology and any accompanying documentation. (f) "Software" means the Synology proprietary software that accompanies the Product when purchased by Customer, is downloaded by Customer at the Web Site, or is pre-installed on the Product by Synology, and includes any firmware, associated media, images, animations, video, audio, text and applets incorporated into the software or Product and any updates or upgrades to such software. (g) "Warranty Period" means the period commencing on the date the Product is purchased by Customer and ending (1) five years after such date for Category I Products; (2) three years after such date for Category II Products; or (3) two years after such date for Category III Products; or (4) one year after such date for Category IV Products; or (5) 90 days after such date for Refurbished Products, except for those sold as as is or with no warranty on Online Store. (h) "Web Site
www.synology.com " means the
Synology web site located at .
Section 2. Limited Warranty and Remedies
2.1 Limited Warranty. Subject to Section 2.7, Synology warrants to Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period. Synology warrants the Software as set forth in the accompanying end user license agreement provided with the Product, if any. Synology provides no warranty to Refurbished Product sold as as is or with no warranty on Online Store.
2.2 Product Registration. Customers may register Products with Synology and may obtain the manufacturing date for Category I Products, Category II Products and Category III Products at the Web Site. The failure to register a Product at the Web Site will not diminish the warranty rights set forth in Section 2.1. Synology is not responsible for Customer's failure to identify the manufacturing date of any Product.
2.3 Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties set forth in Section 2.1 within the applicable Warranty Period in the manner set forth below, then, upon verification of the noncompliance by Synology, Synology will, at Synology's option: (a) use commercially reasonable efforts to repair the Product, or (b) replace the noncomplying Product or part thereof upon return of the complete Product in accordance with Section 2.4 The foregoing sets forth Synology's entire liability and Customer's sole and exclusive remedy for any breach of warranty under Section 2.1 or any other defect or deficiency in the Product. Customer will reasonably assist Synology to diagnose and validate any nonconformity with the Product. The warranty set forth in Section 2.1 does not include: (1) any warranty relating to the Software; (2) physical installation or removal of the Product from Customer's site; (3) visits to Customer's site; (4) labor necessary to effect repairs or replace defective parts other than during Synology's or its contracted service providers' normal local business hours, exclusive of weekends and service providers holidays; (5) any work with any third party equipment or software; (6) any warranty of the hard disk if installed by Customer or any other third party; or (7) any warranty of compatibility with the hard disk.
2.4 Return. Any Product returned by Customer under Section 2.3 must be assigned a Return Merchandise Authorization ("RMA") number by Synology before shipment and must be returned in accordance with Synology's then current RMA procedures. Customer may contact any authorized Synology distributor or reseller or Synology Support to obtain assistance in obtaining an RMA, and must provide proof of purchase and product serial number when asking for such assistance. For warranty claims, Customer must return the complete Product to Synology in accordance with this Section 2.4 to be eligible for coverage under this Warranty. Any Product returned without an RMA number, or any Product that has been disassembled (except under the direction of Synology) will be refused and returned to Customer at Customer's expense. Any Product that has been assigned a RMA number must be returned in the same condition as it was received from Synology to the address designated by Synology, freight pre-paid, in packaging sufficient to protect the contents thereof and with the RMA number prominently displayed on the outside of the box. Customer is responsible for insurance and risk of loss with respect to returned items until they are properly received by Synology. A Product issued a RMA number must be returned within fifteen (15) days after issuance of the applicable RMA number.
2.5 Replacement by Synology. If Synology elects to replace any Product under this Warranty set forth in Section 2.1, then Synology will ship a replacement Product at Synology's expense via the shipping method selected by Synology after receipt of the nonconforming Product returned in accordance with Section 2.4 and validation by Synology that the Product does not conform to the warranty. In some countries, Synology may at its own discretion apply the Synology Replacement Service to certain Products, through which Synology will ship a replacement Product to Customer before its receipt of the nonconforming Product returned by Customer (Synology Replacement Service).
2.6 Support. During the Warranty Period, Synology will make available to Customer the support services. Following
the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request.
2.7 Exclusions. The foregoing warranties and warranty obligations do not apply to any Product that (a) has been installed or used in a manner not specified or described in the Product specifications; (b) has been repaired, modified or altered by anyone other than Synology or its agent or designee; (c) has been in any way misused, abused, or damaged; (d) has been used with items not provided by Synology other than the hardware or software for which the Product is designed; or (e) otherwise fails to conform to the Product specifications and such failure is attributable to causes not within or under Synology's control. Further, the foregoing warranties will be void if (1) Customer disassembles the Product except as authorized by Synology; (2) Customer fails to implement any correction, modification, enhancement, improvement or other update made available to Customer by Synology; or (3) Customer implements, installs or uses any correction, modification, enhancement, improvement or other update made available by any third party. The warranty set forth in Section 2.1 will terminate upon Customer's sale or transfer of the Product to a third party.
2.8 Disclaimer of Warranties. THE WARRANTIES, OBLIGATIONS, AND LIABILITIES OF SYNOLOGY AND THE REMEDIES OF CUSTOMER SET FORTH IN THIS WARRANTY ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND CUSTOMER HEREBY WAIVES, RELEASES AND DISCLAIMS, ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF SYNOLOGY AND ALL OTHER RIGHTS, CLAIMS AND REMEDIES OF CUSTOMER AGAINST SYNOLOGY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO THE PRODUCT, ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES DELIVERED UNDER THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY: (A) IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE; (B) IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE; (C) CLAIM OF INFRINGEMENT OR MISAPPROPRIATION; OR (D) CLAIM IN TORT (WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY OR OTHER THEORY). SYNOLOGY MAKES NO GUARANTEE AND SPECIFICALLY DISCLAIMS ANY WARRANTY THAT THE DATA OR INFORMATION STORED ON ANY SYNOLOGY PRODUCT WILL BE SECURE AND WITHOUT RISK OF DATA LOSS. SYNOLOGY RECOMMENDS THAT CUSTOMER TAKES APPROPRIATE MEASURES TO BACK UP THE DATA STORED ON THE PRODUCT. SOME STATES/JURISDICTIONS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO CUSTOMER.
Section 3. Limitations of Liability
3.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
3.2 Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS SUPPLIERS BE LIABLE FOR THE COST OF COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY
ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
3.3 Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT ACTUALLY PAID BY CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUSTOMER MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow exclusion or limitation of certain damages. To the extent that those laws apply to the Product, the exclusions and limitations set forth above may not apply to Customer.
Section 4. Miscellaneous
4.1 Proprietary Rights. The Product and any accompanying Software and documentation provided with the Product include proprietary and intellectual property rights of Synology and its third party suppliers and licensors. Synology retains and reserves all right, title, and interest in the intellectual property rights of the Product, and no title to or ownership of any intellectual property rights in or to the Product, any accompanying Software or documentation and any other goods provided under this Warranty is transferred to Customer under this Warranty. Customer will (a) comply with the terms and conditions of the Synology end user license agreement accompanying any Software furnished by Synology or an authorized Synology distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or otherwise misappropriate, circumvent or violate any of Synology's intellectual property rights.
4.2 Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise, without the prior written consent of Synology.
4.3 No Additional Terms. Except as expressly permitted by this Warranty, neither party will be bound by, and each party specifically objects to, any term, condition or other provision that conflicts with the provisions of this Warranty that is made by the other party in any purchase order, receipt, acceptance, confirmation, correspondence or otherwise, unless each party specifically agrees to such provision in writing. Further, if this Warranty conflicts with any terms or conditions of any other agreement entered into by the parties with respect to the Product, this Warranty will prevail unless the other agreement specifically references the sections of this Warranty that it supersedes.
4.4 Applicable Law. Unless expressly prohibited by local law, this Warranty is governed by the laws of the State of Washington, U.S.A. without regard to any conflict of law principles to the contrary. The 1980 U.N. Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.
4.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services provided by Synology with respect to the Product or the relationship between Customers residing within the United States and Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a
single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. Customer understands that, in the absence of this provision, Customer would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and Customer expressly and knowingly waives those rights and agrees to resolve any disputes through binding arbitration in accordance with the provisions of this Section 4.5. For Customers not residing within the United States, any dispute, controversy or claim described in this section shall be finally resolved by arbitration conducted by three neutral arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese.
The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this Warranty relating to Synology's intellectual property rights.
4.6 Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.
4.7 Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with all applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration Regulations.
4.8 Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this Warranty will remain in full force and effect.
4.9 Entire Agreement. This Warranty cons
If you want to find out how the RS10613xs+ Synology works, you can view and download the Synology RS10613xs+ v2 Quick Installation Guide on the Manualsnet website.
Yes, we have the Quick Installation Guide for Synology RS10613xs+ as well as other Synology manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Installation Guide should include all the details that are needed to use a Synology RS10613xs+. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Synology RS10613xs+ v2 Quick Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Synology RS10613xs+ v2 Quick Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Synology RS10613xs+ v2 Quick Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Synology RS10613xs+ v2 Quick Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Synology RS10613xs+ v2 Quick Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.