Contents

Synology FX2421 Hardware Installation Guide PDF

1 of 24
1 of 24

Summary of Content for Synology FX2421 Hardware Installation Guide PDF

Expansion Unit FX2421

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start Package Contents 3 Synology FX2421 at a Glance 4 LED Indicator Table 6 Hardware Specification 7 Optional Accessories 8 Spare Parts 8 Safety Instructions 9

Chapter 2: Hardware Setup Tools and Parts for Component Installation 10 Install Drives 10 Install and Remove Rail Kits 12 Connect with Synology NAS 14

Chapter 3: System Maintenance Replace System Fan 16 Replace Power Supply Unit (PSU) 17 Initial Troubleshooting Guide 17

Synology_HIG_FX2421_20200511

2

Thank you for purchasing Synology FX2421 expansion unit! Before setting up your new expansion unit, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your expansion unit.

Note: All images below are for illustrative purposes only, and may differ from the actual product.

Package Contents Main unit x 1 AC power cord x 2

Screws for 2.5" drives x 100

Expansion cable x 1

Before You Start 1 Chapter

3

4 Chapter 1: Before You Start

Synology FX2421 at a Glance

5

1

8

1310 12

9

1411

7

42 3

6 6

No. Article Name Location Description

1 Power Indicator

Front

Displays the power status.1

2 Alert Indicator Displays warnings regarding fan or temperature. For more information, please see "LED Indicator Table".

3 Beep Off Button Press to deactivate the beep that sounds when a malfunction occurs.

4 Drive Status Indicators Displays the status of drives. For more information, please see "LED Indicator Table".

5 Drive Tray Install drives (hard disk drives or solid state drives) here.

6 Rail Kit Release Tab Push in and hold to release your FX2421 from the rail kit lock.2

1 FX2421 automatically powers on when the power cord is plugged into the power source. For more information, please see "Connect with Synology NAS". 2 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.

5 Chapter 1: Before You Start

No. Article Name Location Description

7 Power Port

Back

Connect power cords here.

8 PSU Indicator and Beep Off Button

1. Displays the status of the power supply unit (PSU). For more information, see "LED Indicator Table".

2. Press to deactivate the beep that sounds when a malfunction occurs.

9 PSU Fan Disposes of excess heat and cools the PSU.

10 Status Indicator Displays the status of the system. For more information, please see "LED Indicator Table".

11 Alert Indicator Displays warnings regarding fan or temperature. For more information, please see "LED Indicator Table".

12 Expansion Unit ID Indicator Indicates the ID number of the expansion unit.

13 SAS IN Port and Indicator

Connects to the SAS OUT port of a Synology NAS or another expansion unit. For more information, please see "Connect with Synology NAS".

14 SAS OUT Port and Indicator

Connects to the SAS IN port of another expansion unit. For more information, please see "Connect with Synology NAS".

6 Chapter 1: Before You Start

LED Indicator Table

LED Indicator Color Status Description

Power Blue Static Powered on

Off Powered off

Front ALERT Orange Blinking Fan failure/Over temperature

Off System normal

Drive Status Indicator (on tray)

Green Static Drive ready and idle

Blinking Accessing drive

Red Static Drive error/Port disabled1

Off No internal drive

Rear ALERT Orange Blinking Fan failure/Over temperature

Off System normal

Rear STATUS Green Blinking Powered on

Off Powered off

PSU Indicator Green Static Power supply unit normal

Off Power supply unit off

SAS IN/OUT Green Static Synology NAS connected

Off Synology NAS disconnected

Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.

1 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical Support for help.

7 Chapter 1: Before You Start

Hardware Specification Item FX2421

Compatible Drive Type 2.5" SAS/SATA x 24

Maximum Internal Raw Capacity

92.16 TB (24 x 3.84 TB SSD)

Expansion Port SAS IN x 1

SAS OUT x 1

Size (H x W x D) (mm) 88 x 430.5 x 692

88 x 482 x 724 (with server ears)

Weight (kg) 14.5

Agency Certification FCC Class A CE Class A BSMI Class A

EAC VCCI RCM

Environment Requirements

Line voltage: 100 V to 240 V AC Frequency: 50 / 60 Hz

Operating Temperature: 32 to 95F (0 to 35C) Storage Temperature: -5 to 140F (-20 to 60C)

Relative Humidity: 5% to 95% RH Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.

8 Chapter 1: Before You Start

Optional Accessories With Synology accessories, you can customize your expansion unit to fit different business environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.

Rail Kit

Model Name Picture Description

RKS1317 Sliding rails solutions

Spare Parts Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power

supply units

Model Name Picture Description

Cable MiniSASHD_EXT_1 External MiniSAS HD Cable

Disk Tray (Type R1) 2.5" Drive Tray

FAN 80*80*32_6 System Fan 80*80*32 mm

PSU 500W-RP Module_2 Redundant PSU Module 500W

PSU 500W-RP SET_2 Redundant PSU Set 500W

9 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Component Installation Please prepare the tools and parts below before setting up your expansion unit: A Screwdriver At least one 2.5" SAS/SATA drive (please visit www.synology.com/compatibility for compatible drive

models).

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation.

Rail mounting kit (please see the Optional Accessories section to find suitable rail kits for cabinet installation)

Warning: We suggest mounting your expansion unit on a cabinet before installing any drives since the heavy weight will increase the installation difficulty.

Install Drives Please follow below steps for drive installation:

1 Open the drive tray.

a Find the small button located at the bottom side of the drive tray handle. Press the button down, and the drive tray handle will pop out.

b Pull the drive tray handle out as illustrated above. 2 Place the drive in the drive tray. Tighten the screws provided to secure the drive in place.

3 Insert the loaded drive tray into the empty drive bay.

Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

Hardware Setup

10

2 Chapter

11 Chapter 2: Hardware Setup

4 Push the handle inward to secure the drive tray. 5 Push the switch on the drive tray handle to the bottom to lock the drive tray.

6 Repeat the steps above to assemble the other drives you have prepared. 7 Drives are numbered as shown below.

1 1312111098765432 17161514 21201918 242322

Note: We suggest installing drives of the same size to optimize drive capacity usage when creating RAID volumes.

12 Chapter 2: Hardware Setup

Install and Remove Rail Kits Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.

To install the rail kit

1 To install the rail kit to the rack: a Attach the rear end of the rail kit assembly to the rack. b Slide the front latch outwards and insert the brackets into the rack holes.

2 Extend the inner rail from the assembly and pull it out.

3 Align the fixing holes of the inner rail to the attachment points on the side of the chassis. Slide the inner rail away from the front panel to attach it to the chassis.

13 Chapter 2: Hardware Setup

4 With the help of another person, carefully align the inner rail to the outer rail assembly.

5 Pull and hold the blue front latch of the inner rail to unlock the inner rail. Push the chassis into the rack. Use the cage nuts and screws enclosed with the rail kit package to secure the chassis to the rack if necessary.

To remove the rail kit

1 To remove the chassis from the rack, press the rail kit release tabs on the ear holders inward and pull the chassis out of the rack.

2 With the help of another person, carefully remove the chassis from the rack. Then, slide the inner rail attached to the chassis toward the front panel of the chassis to detach it.

14 Chapter 2: Hardware Setup

Connect with Synology NAS 1 Connect one end of the expansion cable to the SAS OUT port of the Synology NAS and the other to the SAS

IN port of the FX2421. Make sure that the blue release bands of the cable face to the right when plugging it into the Synology NAS and upward when plugging it into the FX2421; otherwise, the Synology NAS and expansion unit will not be connected correctly.

FS3600

FX2421

FX2421

2 Connect one end of both power cords to a power port on your FX2421, and the other to a power outlet. FX2421 will automatically power on once the power cords are connected correctly.

Note: Your FX2421 comes equipped with a redundant power supply system, allowing two power cords to be

connected. The system may be powered on with only one power cord, but we recommend using two power cords to avoid unexpected power failures.

After you have unplugged the power cord, please make sure all the indicator is off before plugging the power cord back in again; otherwise, the system may fail to boot.

Do not remove the expansion cable while the host device is still powered on. Doing so may result in data loss.

15 Chapter 2: Hardware Setup

3 Press the power button on the front panel to power on the Synology NAS. The expansion unit IDs of the FX2421 systems connected to your Synology NAS will be displayed in sequence on their rear panels.

FS3600

FX2421

FX2421

Note: Please update your FlashStation to DSM 6.2.3-25426-2 or later versions for Synology Expansion Unit

FX2421 support. With your Synology NAS and expansion units powered on, it is still possible to add one or more expansion

units when needed. To do so, repeat the above steps to connect the expansion cables and power cords of the additional expansion units. Your expansion units will automatically power on if they are connected correctly and will display their expansion unit IDs within a few seconds (if DSM is correctly installed on the Synology NAS).

The actual number of expansion units that can be connected depends on the performance limitations and specifications of the Synology NAS.

3 Chapter

System Maintenance

Replace System Fan If a system fan malfunctions, please see the instructions below to open the case of FX2421 and replace the malfunctioning fan.

1 Press the small buttons located on the sides of the FX2421.

2 Lift to remove the fan cover.

3 Fans are numbered as shown below.

4 Find the malfunctioning fan. Lift up the fan to remove it.

16

17 Chapter 3: System Maintenance

5 Prepare a new fan, and slide it into the FX2421. Make sure that the fan is aligned properly, as shown below.

Replace Power Supply Unit (PSU) If a PSU or its fan malfunctions, please follow the steps below to replace the malfunctioning PSU.

1 Unplug the power cord from the PSU that is to be replaced.

Note: By pressing the Beep Off button, you can silence the long beep when it sounds.

2 On the rear panel, push the lever of the PSU inward as shown. 3 Pull out the PSU from your FX2421.

2 3

4 Prepare a new PSU. Insert it into the empty slot until you hear a click.

Initial Troubleshooting Guide We have selected several helpful articles on frequently asked questions to help you do initial troubleshooting on your Synology NAS:

General What is the width of my Synology rackmount NAS?

Hard Disk Drive How to diagnose drives' health status when receiving bad sector warning? How to fix drive failure and retrieve the data from your drives What should I do if my Synology NAS cannot recognize installed drives? How do I know whether the problem is with my Synology NAS or drive when drive errors occur?

LED How do I recognize a hibernating Synology NAS via the LED indicators?

SYNOLOGY, INC. END USER LICENSE AGREEMENT

IMPORTANTREAD CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PURCHASED BY YOU (THE "PRODUCT"), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( "SOFTWARE").

YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY USING THE PRODUCTS CONTAINING THE SOFTWARE, INSTALLING THE SOFTWARE ONTO THE PRODUCTS OR DEVICE CONNECTED TO THE PRODUCTS. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT USETHE PRODUCTS CONTAINING THE SOFTWAREOR DOWNLOAD THE SOFTWARE FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY.INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY.

Section 1. Limited Software License. Subject to the terms and conditions of this EULA, Synology grants you a limited, non- exclusive, non-transferable, personal license to install, run and use one copy of the Software loaded on the Product or on your device connected to the Product solely relating to your authorized use of the Product.

Section 2. Documentation. You may make and use a reasonable number of copies of any documentation provided with the Software; provided that such copies will only be used for internal business purposes and are not to be republished or redistributed (either in hard copy or electronic form) to any third party.

Section 3. Backup. You may make a reasonable number of copies of the Software for backup and archival purposes only.

Section 4. Updates. Any software provided to you by Synology or made available on the Synology website at www.synology.com ("Website") or any other channel provided by Synology that updates or supplements the original Software is governed by this EULA unless separate license terms are provided with such updates or supplements, in which case, such separate terms will govern.

Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA. Without limiting the foregoing, you shall not authorize or permit any third party to: (a) use the Software for any purpose other than that in connection with the Product; (b) license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Software; (c) reverse engineer, decompile, disassemble or attempt to discover the source code of or any trade secrets related to the Software, except and only to the extent that such conduct is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivative works of the Software; (e) remove, alter or obscure any copyright notice or other proprietary rights notice on the Software or Product; or (f) circumvent or attempt to circumvent any methods employed by Synology to control access to the components, features or functions of the Product or Software. Subject to the limitations specified in this Section 5, you are not prohibited from providing any services hosted by Synology NAS server to any third party for commercial purpose.

Section 6. Open Source. The Software may contain components licensed to Synology under the GNU General Public License ("GPL Components"), currently available at http://www.gnu.org/licenses/gpl.html. The terms of the GPL will control solely with respect to the GPL Components to the extent that this EULA conflicts with the requirements of the GPL with respect to your use of the GPL Components, and, in such event, you agree to be bound by the GPL with respect to your use of such components.

Section 7. Audit. Synology will have the right to audit your compliance with the terms of this EULA. You agree to grant Synology a right to access to your facilities, equipment, books, records and documents and to otherwise reasonably cooperate with Synology in order to facilitate any such audit by Synology or its agent authorized by Synology.

Section 8. Ownership. The Software is a valuable property of Synology and its licensors, protected by copyright and other intellectual property laws and treaties. Synology or its licensors own all rights, titles and interests in and to the Software, including but not limited to copyright and any other intellectual property rights.

Section 9. Limited Warranty. Synology provides a limited warrant that the Software will substantially conform to Synology's published specifications for the Software, if any, or otherwise set forth on the Website, for a period required by your local law. Synology will use commercially reasonable efforts to, in Synology's sole discretion, either correct any such nonconformity in the Software or replace any Software that fails to comply with the foregoing warranty, provided that you give Synology written notice of such noncompliance within the warranty period. The foregoing warranty does not apply to any noncompliance resulting from any: (w) use, reproduction, distribution or disclosure not in accordance with this EULA; (x) any customization, modification or other alteration of the Software by anyone other than Synology; (y) combination of the Software with any product, services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA.

Section 10. Support. During the period specified in the Section 9, Synology will make available to you the support services. Following the expiration of the applicable period, support for Software may be available from Synology upon written

request.

Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.

Section 12. Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Section 13. Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties, disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to you.

Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations.

Section 15. Termination. Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the Software and all of its component parts.

Section 16. Assignment. You may not transfer or assign your rights under this EULA to any third party, except for that pre- installed in the Products. Any such transfer or assignment in violation of the foregoing restriction will be void.

Section 17. Applicable Law. Unless expressly prohibited by local law, this EULA is governed by and construed in accordance with the laws of the country, in accordance with which Synology Inc. was organized without regard to any conflict of law principles to the contrary.

Section 18. Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this EULA will be resolved exclusively and finally by arbitration conducted by three neutral arbitrators in accordance with the procedures of the Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall take place in Taipei and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and you expressly and knowingly waive those rights and agree to resolve any disputes through binding arbitration in accordance with the provisions of this Section 18. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights.

Section 19. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees.

Section 20. Severability. If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this EULA will remain in full force and effect.

Section 21. Entire Agreement. This EULA sets forth the entire agreement of Synology and you with respect to the Software and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether written or oral. No amendment, modification or waiver of any of the provisions of this EULA will be valid unless set forth in a written instrument signed by the party to be bound thereby.

Powered by TCPDF (www.tcpdf.org)

SYNOLOGY, INC.LIMITED PRODUCT WARRANTY

THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC.

AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND

AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR

USING THE PRODUCT. PLEASE BE ADVISED THAT THIS LIMITED WARRANTY DOES NOT APPLY TO THE SOFTWARE

CONTAINED IN THE PRODUCTS WHICH SHALL BE SUBJECT TO ITS END USER LICENSE AGREEMENT, AND THAT

SYNOLOGY RESERVES THE RIGHT TO MAKE ADJUSTMENTS AND/OR MODIFICATION TO THIS PRODUCT

WARRANTY FROM TIME TO TIME WITHOUT PROVIDING PRIOR NOTICE TO YOU. IF YOU DO NOT AGREE TO THE

TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE

RESELLER WHERE YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE

RETURN POLICY.PLEASE NOTE THAT SYNOLOGYS WARRANTY SUPPORTS ARE NOT AVAILABLE IN EVERY

COUNTRY, AND THAT SYNOLOGY MAY REFUSE TO PROVIDE THIS LIMITED WARRANTY SUPPORTS TO YOU IF YOU

REQUEST SUCH SUPPORTS NOT AT THE COUNTRY AT WHICH THE PRODUCT WAS ORIGINALLY PURCHASED. THE

COUNTRY AT WHICH THE PRODUCT WAS ORIGINALLY PURCHASED SHALL BE DETERMINED BASED ON THE

SYNOLOGYS INTERNAL RECORDS.

Section 1. Products

(a) "Products" refer to New Products or Refurbished Products.(b) "New Product" means the Synology-branded hardware

product and Synology-branded accessories contained in the original packaging Customer bought from an authorized Synology

distributor or reseller. You may see our New Product at https://www.synology.com/products/status.(c) "Refurbished Product"

means all Synology products which have been refurbished by Synologys affiliate or an authorized Synology distributor or

reseller, not including those sold as "as is" or with "no warranty" by anyone.(d) Other definition: "Customer" means the original

person or entity purchasing the Product from Synology or an authorized Synology distributor or reseller; "Online Store" means

an online shop operated by Synology or Synologys affiliate; "Software" means the Synology proprietary software that

accompanies the Product when purchased by Customer, is downloaded by Customer from the Web Site, or is pre-installed on

the Product by Synology, and includes any firmware, associated media, images, animations, video, audio, text and applets

incorporated into the software or Product and any updates or upgrades to such software.

Section 2. Warranty Period

(a) "Warranty Period": The warranty period commences on the purchase date is shown on the purchase receipt or invoice to be

presented by Customer and ending at the day after the end of the Warranty Period for each New Product. You may see the

Warranty Period for each New Product at https://www.synology.com/products/status. For the Refurbished Product or repaired

parts, it's the remainder of the warranty period of the product they are replacing, or ninety (90) days from the date the product

was replaced or repaired, whichever is longer; except for those sold as "as is" or with "no warranty" by any stores. Without

presenting such purchase receipt or invoice, the warranty period shall commence on the date of manufacture based on our

internal record.(b) "Extended Warranty Period": For Customer purchasing EW201/ EW202 optional service for applicable

Products specified in Section 1 (b), the Warranty Period specified in Section 2 (a) of the applicable Product registered with

EW201/EW202 optional service will be extended by two years. You may see the applied model at

https://www.synology.com/products/Extended_Warranty.

Section 3. Limited Warranty and Remedies

3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material

defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published

specifications for the Product during the Warranty Period. Such limited warranty does not apply to the Software contained in

the product or purchased by Customer which shall be subject to the accompanying end user license agreement provided with

the Product. Synology provides no warranty to Refurbished Product sold as "as is" or with "no warranty". This Limited Warranty

is NOT transferable and applies only to the customers who directly purchase products from Synologys affiliate, the resellers,

and distributor that Synology authorized. The warranty set forth in Section 3 will terminate upon Customer's sale or transfer of

the Product to a third party.

3.2 Exclusions. The foregoing warranties and warranty obligations do not apply to any Product that (a) has been installed or

used in a manner not specified or described in the Product or its related documents (b) has been damaged by service

(including upgrades and expansions) performed by anyone who is not a representative of Synology or any Synology

Authorized Service Provider; (c) has been in any way misused, abused, or damaged; (d) has been used with items not

provided by Synology other than the hardware or software for which the Product is designed; or (e) otherwise fails to conform

to the Product specifications and such failure is attributable to causes not within or under Synology's control. (f) has been tie-in

any non-Synology branded hardware products or any software, even if packaged or sold with Synology hardware. (g)

Customer disassembles the Product except as authorized by Synology; (h) Customer fails to implement any correction,

modification, enhancement, improvement or other update made available to Customer by Synology; or (i) Customer

implements, installs or uses any correction, modification, enhancement, improvement or other update made available by any

third party. (j) Any compatibility issues occurred when installing hardware products, software, or components not supported by

Synology. (k) product damage caused by accident, fire, liquid contact, earthquake or other external cause. (l) cosmetic damage

caused by normal wear and tear or otherwise due to the normal aging of the Product, including but not limited to scratches,

dents and broken plastic on ports unless failure has occurred due to a defect in materials or workmanship; (m) serial number

has been removed or defaced from Product, resulting in not able to identify.

3.3 Warranty Support and Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties set forth

in Section 3.1 within the applicable Warranty Period in the manner set forth below, then, upon verification of the noncompliance

by Synology, Synology will, at Synology's option: (a) use commercially reasonable efforts to repair the Product, (b) provide

technical support, or (c) replace the noncomplying Product or part thereof upon return of the complete Product in accordance

with Section 3.4 The foregoing sets forth Synology's entire liability and Customer's sole and exclusive remedy for any breach of

warranty under Section 3.1 or any other defect or deficiency in the Product. Customer will reasonably assist Synology to

diagnose and validate any nonconformity with the Product.

3.4 Return. Any Product return by Customer under Section 3.3 must be made in accordance with Synology's then-current

return procedures with the purchase receipt or invoice. You may see more information about return procedure at

https://www.synology.com/knowledgebase/DSM/tutorial/Service_Application/How_to

_make_warranty_claim_for_Synology_NAS, for warranty claims, Customer must return the complete Product to Synology in

accordance with this Section 3.4. Any Product returned that has been disassembled (except under the direction of Synology)

will be refused and returned to Customer at Customer's expense. Any Product must be returned in the same condition as it

was received from Synology to the address designated by Synology, freight pre-paid, in packaging sufficient to protect the

contents thereof. Customer is responsible for insurance and risk of loss with respect to returned items until they are properly

received by Synology.

3.5 Replacement by Synology. If Synology elects to replace any Product under this Warranty set forth in Section 3.1, then

Synology will ship a replacement Product at Synology's expense via the shipping method selected by Synology after receipt of

the nonconforming Product returned in accordance with Section 3.4 and validation by Synology that the Product does not

conform to the warranty. In some countries, Synology may at its own discretion apply the Synology Replacement Service to

certain Products, through which Synology will ship a replacement Product to Customer before its receipt of the nonconforming

Product returned by Customer ("Synology Replacement Service").

3.6 Disclaimer of Warranties. THE WARRANTIES, OBLIGATIONS, AND LIABILITIES OF SYNOLOGY AND THE

REMEDIES OF CUSTOMER SET FORTH IN THIS WARRANTY ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND

CUSTOMER HEREBY WAIVES, RELEASES AND DISCLAIMS, ALL OTHER WARRANTIES, OBLIGATIONS AND

LIABILITIES OF SYNOLOGY AND ALL OTHER RIGHTS, CLAIMS AND REMEDIES OF CUSTOMER AGAINST SYNOLOGY,

EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO THE PRODUCT, ACCOMPANYING

DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES DELIVERED UNDER THIS WARRANTY,

INCLUDING, BUT NOT LIMITED TO ANY: (A) IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE OR USE; (B) IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF

DEALING, OR USAGE OF TRADE; (C) CLAIM OF INFRINGEMENT OR MISAPPROPRIATION; OR (D) CLAIM IN TORT

(WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY OR OTHER THEORY). SYNOLOGY

MAKES NO GUARANTEE AND SPECIFICALLY DISCLAIMS ANY WARRANTY THAT THE DATA OR INFORMATION

STORED ON ANY SYNOLOGY PRODUCT WILL BE SECURE AND WITHOUT RISK OF DATA LOSS. SYNOLOGY

RECOMMENDS THAT CUSTOMER TAKES APPROPRIATE MEASURES TO BACK UP THE DATA STORED ON THE

PRODUCT. SOME STATES/JURISDICTIONS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE

LIMITATION MAY NOT APPLY TO CUSTOMER.

Section 4. Limitations of Liability

4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on

account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its

reasonable control (including, without limitation, any act or failure to act by Customer).

4.2 Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS SUPPLIERS BE LIABLE FOR THE COST OF

COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR

LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT

OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY

ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER

THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR

OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

4.3 Limitation of Liability. SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO THE USE

OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER

GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT ACTUALLY PAID BY

CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUSTOMER MAY INCUR AND

WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The

foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law.

The laws of some states/jurisdictions do not allow exclusion or limitation of certain damages. To the extent that those laws

apply to the Product, the exclusions and limitations set forth above may not apply to Customer.

Section 5. Miscellaneous

5.1 Proprietary Rights. The Product and any accompanying Software and documentation provided with the Product include

proprietary and intellectual property rights of Synology and its third party suppliers and licensors. Synology retains and

reserves all right, title, and interest in the intellectual property rights of the Product, and no title to or ownership of any

intellectual property rights in or to the Product, any accompanying Software or documentation and any other goods provided

under this Warranty is transferred to Customer under this Warranty. Customer will (a) comply with the terms and conditions of

the Synology end user license agreement accompanying any Software furnished by Synology or an authorized Synology

distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or

otherwise misappropriate, circumvent or violate any of Synology's intellectual property rights.

5.2 Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise,

without the prior written consent of Synology.

5.3 No Additional Terms. Except as expressly permitted by this Warranty, neither party will be bound by, and each party

specifically objects to, any term, condition or other provision that conflicts with the provisions of this Warranty that is made by

the other party in any purchase order, receipt, acceptance, confirmation, correspondence or otherwise, unless each party

specifically agrees to such provision in writing. Further, if this Warranty conflicts with any terms or conditions of any other

agreement entered into by the parties with respect to the Product, this Warranty will prevail unless the other agreement

specifically references the sections of this Warranty that it supersedes.

5.4 Applicable Law. Unless explicitly prohibited by local law, this Warranty is governed by the laws of the State of

Washington, U.S.A. for the Customers residing within the United States; and by the laws of the Republic of China (Taiwan) for

Customers not residing within the United States, without regard to any conflict of law principles to the contrary. The 1980 U.N.

Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.

5.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services

provided by Synology with respect to the Product or the relationship between Customers residing within the United States and

Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration

Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited

solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any

other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County,

Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the

request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall

receive all costs and reasonable attorneys fees, including any arbitration fee paid by the prevailing party. Any decision

rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any

court of competent jurisdiction. Customer understands that, in the absence of this provision, Customer would have had a right

to litigate any such dispute, controversy or claim in a court, including the right to litigate claims on a class-wide or class-action

basis, and Customer expressly and knowingly waives those rights and agrees to resolve any disputes through binding

arbitration in accordance with the provisions of this Section 5.5. For Customers not residing within the United States, any

dispute, controversy or claim described in this section shall be finally resolved by arbitration conducted by three neutral

arbitrators in accordance with the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall

take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree,

in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having

jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking

such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this

Warranty relating to Synology's intellectual property rights.

5.6 Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this

Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and

reasonable attorneys' fees.

5.7 Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with all

applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration

Regulations.

5.8 Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or

unenforceable, the remainder of this Warranty will remain in full force and effect.

5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements,

between Synology and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the

provisions of this Warranty will be valid unless set forth in a written instrument signed by the party to be bound thereby.

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

A

Manualsnet FAQs

If you want to find out how the FX2421 Synology works, you can view and download the Synology FX2421 Hardware Installation Guide on the Manualsnet website.

Yes, we have the Hardware Installation Guide for Synology FX2421 as well as other Synology manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Hardware Installation Guide should include all the details that are needed to use a Synology FX2421. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Synology FX2421 Hardware Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Synology FX2421 Hardware Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Synology FX2421 Hardware Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Synology FX2421 Hardware Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Synology FX2421 Hardware Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.