Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide PDF

1 of 14
1 of 14

Summary of Content for Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide PDF

2017 IMPREZA Quick Guide

Love. Its what makes a Subaru, a Subaru.

2822228_17a_EyeSight_Impreza_QG_112316.indd 2 11/29/16 2:13 PM

Table of Contents

EyeSight 2 EyeSight and EyeSight Functions

3 EyeSight Operation

4 Steering Wheel Controls

5 Lane Departure Warning and Pre-Collision Braking System OFF Switches

6 EyeSight Limitations

7 Stereo Color Cameras Precautions

89 Windshield Glass and Dashboard

Other Driver Assist Technologies 10 Rear Cross Traffic Alert (RCTA)

Lane Change Assist (LCA)

Blind Spot Detection (BSD)

11 Reverse Automatic Braking (RAB) System

High Beam Assist (HBA)

Steering Responsive Headlights (SRH)

Steering Responsive Foglights (SRF)

2822228_17a_EyeSight_Impreza_QG_112316.indd 1 11/29/16 2:13 PM

2

EyeSight Functions Pre-Collision Braking System This function can recognize an impending collision with an obstacle or a vehicle traveling in the same lane ahead of the EyeSight vehicle. It informs the driver with audible and visual alerts. If the driver takes no corrective action, the system will automatically apply the brakes to help avoid the collision or minimize impact when a collision is inevitable.

Pre-Collision Brake Assist If EyeSight recognizes an impending collision with an obstacle or a vehicle traveling in the same lane ahead of the EyeSight vehicle, and the driver applies the brakes but not with enough brake pedal force, Pre-Collision Brake Assist automatically applies up to full braking pressure in order to try to shorten stopping distance.

Pre-Collision Throttle Management This function is designed to help prevent drivers from unintentionally accelerating into a stopped vehicle or other obstacle in front of the EyeSight vehicle. It simultaneously warns the driver and reduces engine power until the driver applies the brakes to help avoid an impact.

Pre-Collision Throttle Management is helpful when:

The driver inadvertently selects Drive instead of Reverse and starts to accelerate toward a parked car, wall or parking structure.

Starting to merge onto another road when the vehicle ahead accelerates, but suddenly stops.

Lane Departure Warning and Lane Sway Warning Lane Departure Warning alerts drivers when they unintentionally move out of their travel lane. It takes no corrective vehicle action other than issuing visual and audible warnings.

Lane Sway Warning acts in a similar way, detecting unusual back and forth vehicle movement within the drivers lane of travel that is usually indicative of a drowsy driver.

Lane Keep Assist If the vehicle is about to deviate from a driving lane and starts crossing the road lines, steering assistance control is triggered in the opposite direction, helping to avoid lane deviation. A departure warning sound and display in the instrument cluster occur to alert the driver.

Note: This is a driver selectable feature and must be turned on to be functional.

EyeSight EyeSight is a driving support system that uses a range of functions to assist the driver in making decisions in order to provide for more safe and comfortable driving and to reduce driver fatigue. It is designed to help assist drivers, not replace them.

2822228_17a_EyeSight_Impreza_QG_112316.indd 2 11/29/16 2:13 PM

3

Stereo color camera Stereo color camera

EyeSight Operation EyeSight uses stereo color cameras to process 3-D images and identify objects such as the vehicle in front, obstacles, traffic lanes and other items. Under the right circumstances, if the driver takes no corrective action, EyeSight will apply the brakes or decrease the throttle to help reduce the severity of a collision, or help avoid a collision.

Adaptive Cruise Control and Lead Vehicle Start Alert This function combines the benefits of Cruise Control with active monitoring of the road ahead by EyeSight. It issues warnings and activates automatic braking when needed. When turned on by the driver, Adaptive Cruise Control can regulate the driver set speed in order to keep a driver-selected gap between the EyeSight vehicle and the vehicle ahead traveling in the same lane. Adaptive Cruise Control can regulate vehicle speed in order to keep the driver selected gap between it and the vehicle ahead. It does not replace Conventional Cruise Control, which can still be used when desired.

Lead Vehicle Start Alert notifies the driver when the vehicle in front has started moving but the EyeSight drivers vehicle has not.

2822228_17a_EyeSight_Impreza_QG_112316.indd 3 11/29/16 2:13 PM

4

INFO/SET switch

Steering Wheel Controls

INFO/SET switch Use the arrows above and below to set or view information on various functions in the multi-information display.

Adaptive Cruise Control switch Press to turn Adaptive Cruise Control on or off.

RES/+ switch Press to resume set speed or to increase set speed while in either Adaptive or Conventional Cruise Control.

SET/- switch Press to set the current speed or to reduce set speed while in either Adaptive or Conventional Cruise Control.

Lane Keep Assist switch Press to activate or deactivate Lane Keep Assist.

Following Distance Setting switches Press to change the following distance setting while using Adaptive Cruise Control.

Press and hold to turn off Adaptive Cruise Control and to switch to Conventional Cruise Control.

Adaptive Cruise Control switch

Lane Keep Assist switch

Following Distance Setting switch

RES/+ switch SET/ switch

2822228_17a_EyeSight_Impreza_QG_112316.indd 4 11/29/16 2:13 PM

5

When these functions are off, the indicator light on the instrument panel illuminates (see right).

Pre-Collision Braking System OFF switch Press and hold this switch for three seconds to turn off the Pre-Collision Braking System and Pre-Collision Throttle Management.

Press and hold the switch again for three seconds to turn the systems back on.

Consult the Owners Manual for more detailed information.

Lane Departure Warning OFF switch Press and hold this switch for three seconds to turn off the Lane Departure Warning and the Lane Sway Warning functions.

Press and hold the switch again for three seconds to turn the functions back on.

Lane Departure Warning and Pre-Collision Braking System OFF Switches

Lane Departure Warning OFF light

Pre-Collision Braking System OFF light

The switches are located on the overhead console.

2822228_17a_EyeSight_Impreza_QG_112316.indd 5 11/29/16 2:13 PM

6

EyeSight Limitations* The EyeSight system needs time to recognize an object or potential obstacle. When the

vehicle speed differential with an obstacle in front is greater than approximately 30 mph, it may not be possible to avoid an impending collision.

Sun glare, inclement weather such as heavy rain, blinding snow or fog, or a dirty windshield will hinder EyeSight operation. A cracked windshield, oil film on the glass or reflections may impede EyeSight performance. In these conditions, EyeSight may not operate properly or EyeSight may temporarily stop operating. If you cannot see, EyeSight cannot see.

EyeSight may not recognize low-contrast objects, those with regularly spaced patterns, no pattern, horizontal lines, backlit objects, very small objects (less than 3 feet tall) or non-standard shaped vehicles, such as cement mixers or car-carrier trucks.

Non-approved aftermarket vehicle accessories, such as hood protectors, and water- repellent glass coatings should not be used with EyeSight-equipped vehicles. EyeSight may not operate properly or EyeSight may temporarily stop operating.

*Please refer to the disclaimer information on the back cover.

2822228_17a_EyeSight_Impreza_QG_112316.indd 6 11/29/16 2:13 PM

7

Stereo Color Cameras Precautions The stereo color camera lenses are precision components. When the system detects that the stereo color camera lenses are dirty, no EyeSight functions will be activated.

Always observe the following precautions:

Do not touch or try to clean the EyeSight camera lenses inside the vehicle. Extra precaution should be used when cleaning the inside of the windshield. Over-spray from cleaners may impair or even damage the cameras lenses. Such damage is not covered under any vehicle warranty.

Do not attempt to remove or disassemble the stereo color cameras.

Do not attempt to change the position where the stereo color cameras are installed or modify any of the surrounding structures.

Do not install any interior rearview mirror (such as a wide-type mirror) other than a genuine SUBARU rearview mirror. Also, adjust the rearview mirror so it does not obstruct the stereo color cameras. Failure to do so may affect the stereo color cameras field of vision and could prevent the EyeSight system from functioning properly.

For more detailed information, please consult your EyeSight Owners Manual.

2822228_17a_EyeSight_Impreza_QG_112316.indd 7 11/29/16 2:13 PM

8

Windshield Glass and Dashboard There must be no oil film, dirt, scratch or fogging that obstructs the forward visibility of the stereo color cameras.

Do not stick or attach aftermarket parts on the prohibited areas shown in gray on the windshield and top of the dashboard in the image in this section.

Even outside the prohibited area, if the abnormal operation occurs due to the reflection of the light or the reflection on the glass, change the adhering position or installation position.

Application of stickers or antennas, installation of widetype mirror This will affect the visibility of the stereo color cameras and may impair functionality.

Placement of an aftermarket navigation unit, cellphone or similar on the dashboard These things may be reflected on the windshield glass, affecting the recognition of the

stereo color cameras, thus causing its function to not operate as designed.

2822228_17a_EyeSight_Impreza_QG_112316.indd 8 11/29/16 2:13 PM

9

(A) 355 mm (13.2 in) (B) 139 mm (5.5 in)

(C) 243 mm (9.6 in) (D) Prohibited area (in gray)

FRONT VIEW

2822228_17a_EyeSight_Impreza_QG_112316.indd 9 11/29/16 2:14 PM

10

Other Driver Assist Technologies Rear Cross Traffic Alert (RCTA) Rear Cross Traffic Alert (RCTA) notifies the driver of a collision danger if a vehicle is detected approaching from either direction, perpendicular to the reversing vehicle. The system uses radar detection sensors located in the left rear and right rear of the vehicle. The system uses an audible and visual warning to alert the driver.

Lane Change Assist (LCA) Lane Change Assist (LCA) notifies the driver of an approaching vehicle in an adjacent lane or lanes. The system uses radar detection sensors located in the left rear and right rear of the vehicle. The sensors illuminate a vehicle icon in the exterior mirror on the side in which the oncoming vehicle is detected. When the driver uses the turn signal indicator to switch lanes, and a vehicle is in their path, the radar detection sensor flashes the vehicle icon only in the exterior mirror on the side the oncoming vehicle is detected.

Blind Spot Detection (BSD) Blind Spot Detection (BSD) assists the driver by detecting vehicles located on either side of the vehicle that are hidden to the drivers view in the exterior mirror. The system uses radar detection sensors located in the left rear and right rear of the vehicle. The sensors illuminate a vehicle icon only in the exterior mirror on the side the oncoming vehicle is detected. When the driver uses the turn signal indicator to switch lanes, and a vehicle is in their path, the radar detection sensor flashes the vehicle icon only in the exterior mirror on the side the oncoming vehicle is detected.

2822228_17a_EyeSight_Impreza_QG_112316.indd 10 11/29/16 2:14 PM

11

Reverse Automatic Braking (RAB) System (if equipped)

The Reverse Automatic Braking (RAB) system is designed to assist the driver by detecting objects, to help avoid a possible collision, when the vehicle is moving in a low speed reverse direction. The system will provide automatic vehicle braking, if a obstacle is detected within its range.

This system is not a substitute for safe and attentive driving. System effectiveness depends on many factors, such as vehicle maintenance, weather, and road conditions. Always exercise caution and use vehicle mirrors and the Rear-Vision Camera when backing up. See the Owners Manual for complete details on system operation and limitations.

Steering Responsive Foglights (SRF) (if equipped)

When the vehicles headlights are turned on, or the headlights are in the automatic mode in the low beam position, fog lights off, the Steering Responsive Fog Lights (SRF) system is active. The system monitors vehicle speed and steering angle and activates the left or right fog light independently, respective to cornering left or right. This helps provide increased visibility in the direction of the turn. The system functions independently from the turn signals and will not function if the turn signals are used. See the Owners Manual for complete details on system operation and limitations.

High Beam Assist (HBA) (if equipped)

High Beam Assist automatically switches the headlights between the high and low beams when the headlight switch is in the high beam position. The system works in conjunction with the EyeSight system. The EyeSight system detects a vehicle ahead, or oncoming vehicles, and switches the headlights automatically from high beam to low beam. See the Owners Manual for complete details on system operation and limitations.

Steering Responsive Headlights (SRH) (if equipped)

The Steering Responsive Headlights (SRH) system aims the headlight beams in the direction of the vehicle travel on curved roads to help improve visibility at night. See the Owners Manual for complete details on system operation and limitations.

2822228_17a_EyeSight_Impreza_QG_112316.indd 11 11/29/16 2:14 PM

Notes

2822228_17a_EyeSight_Impreza_QG_112316.indd 12 11/29/16 2:14 PM

MSA5B1713A Issued December 2016 Printed in USA 12/16

EyeSight is a driver assist system that may not operate optimally under all driving conditions. The driver is always responsible for safe and attentive driving. System effectiveness depends on many factors such as vehicle maintenance, tire condition, and weather and road conditions. See the Owners Manual for complete details on system operation and limitations.

All information contained within this EyeSight guide was accurate at the time of publication. Subaru of America, Inc. reserves the right to change features, operation and/or functionality of any vehicle specification at any time without incurring any obligation to make the same or similar changes to products previously sold. Your Subaru retailer is the best source for the most cur

Manualsnet FAQs

If you want to find out how the Eyesight Subaru works, you can view and download the Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide on the Manualsnet website.

Yes, we have the Quick Guide for Subaru Eyesight as well as other Subaru manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Guide should include all the details that are needed to use a Subaru Eyesight. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Subaru Impreza 2.0i 5-Door Eyesight 2017 Quick Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.