Contents

Sony TMR-BT10A Operating Instructions PDF

1 of 44
1 of 44

Summary of Content for Sony TMR-BT10A Operating Instructions PDF

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Portable Stereo Transmitter

3-280-223-11(1)

TMR-BT10A 2007 Sony Corporation

Operating Instructions

Manual de instrucciones ES

US

01US00COV+U2.p65 8/8/07, 1:26 pm1

2 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus.

Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately.

Do not expose the battery to excessive heat such as direct sunlight, fire or the like.

For the customers in the USA Owners Record The model number is located at the side of the unit, and the serial number is located inside the holding clip. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. TMR-BT10A Serial No.

Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

01US01TOC+U2.p65 8/8/07, 1:26 pm2

3 US

US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Table Of Contents

What is Bluetooth wireless technology? .................. 4

Welcome! .......................... 5 3 steps to Bluetooth function .... 6

Location and Function of Parts ............................... 7

Charging the unit ............. 8

Pairing ............................. 10 What is pairing? ...................... 10 Procedures of pairing .............. 10

Indications of Bluetooth function ...... 12

Listening to music ......... 13

Disposing of the unit ..... 15

Precautions .................... 16

Troubleshooting ............. 18

Initializing the unit ......... 20

Specifications ................. 21

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822- 8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

01US01TOC+U2.p65 8/8/07, 1:27 pm3

4 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

What is Bluetooth wireless technology? BluetoothTM wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 m (about 30 ft). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.* You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.

* This unit cannot be connected to multiple devices at the same time.

Communication System and Compatible Bluetooth Profiles of this unit Profile is standardization of the function for each Bluetooth device specification. This unit supports the following Bluetooth version and profile:

Communication System: Bluetooth Specification version 2.0

Compatible Bluetooth Profile: A2DP (Advanced Audio Distribution

Profile)

01US02FEA+U2.p65 8/8/07, 1:27 pm4

5 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Welcome! Thank you for purchasing this Sony Portable Stereo Transmitter. This unit uses Bluetooth wireless technology.

Wireless transmitter for streaming of high-quality stereo music from digital music player.

Transmits music to other devices using Bluetooth wireless technology.*

Useful rechargeable function.

* The connected Bluetooth device is required to support A2DP (Advanced Audio Distribution Profile).

Enjoy listening to music

01US02FEA+U2.p65 8/8/07, 1:27 pm5

6 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

3 steps to Bluetooth function

In the example below, we explain how to transmit music played on your audio device connected to this unit and listen to music on a Bluetooth stereo audio receiving device (headphone, stereo audio system, etc.).

Pairing Enables a Bluetooth stereo audio receiving device and this unit to recognize one another.

Bluetooth connection Turning on this unit automatically makes the Bluetooth connection between this unit and the Bluetooth stereo audio receiving device.

Transmitting music You can enjoy listening to music played on the portable audio player, etc., connected to this unit through the Bluetooth audio receiving system.

b

v

Portable Stereo Transmitter

Connection

Pairing

Stereo audio signal (Streaming)

Audio device

For more details, see pages 10 - 11.

For more details, see page 13 - 14.

Bluetooth stereo audio receiving device

01US02FEA+U2.p65 8/8/07, 1:27 pm6

7 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Location and Function of Parts

GETTING STARTED

1 Initialize button 2 Indicator (red)

Indicates the power status of the unit.

3 Indicator (blue) Indicates the communication status of the unit.

4 POWER button 5 Audio in plug (Gold-

plated L-shaped stereo mini plug) Connects to the headphone jack of a portable audio player, etc.

6 RESET button Press when the unit becomes inoperative. Pairing information is not deleted by this operation.

7 Holding clip Adjust the holding clip to the desired angle and clip to your bag.

8 Terminal for the battery charging stand

01US03GET+U2.p65 8/8/07, 1:27 pm7

8 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

1 Connect the supplied AC power adaptor with the battery charging stand.

2 Connect the supplied AC power adaptor to an AC outlet.

Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time.

Battery charging stand (supplied)

(Rear)

AC power adaptor (supplied)

3 Put the unit on the battery charging stand.

Note If the holding clip is turned, the unit cannot be set on the battery charging stand and charging does not start. Turn the holding clip back to the original position before charging.

Rest the unit on the battery charging stand so that the units terminal for the battery charging stand meets the contact pin on the battery charging stand, and make sure that the indicator (red) lights up.

Charging is completed in about 3 hours* and the indicator (red) goes off automatically. * Time required for empty battery

to recharge. Tip When charging the battery, the unit is turned off automatically.

To an AC outlet

Portable Stereo Transmitter

Contact pin

Battery charging stand (supplied)

01US03GET+U2.p65 8/8/07, 1:27 pm8

9 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Status

Full

Mid

Low (needs to charge)

Approx. usage hours

11 hours

Checking the remaining battery When pressing the POWER button while the unit is turned on, the indicator (red) flashes. You can check the remaining battery by the number of times the indicator (red) flashes.

Indicator (red)

3 times

2 times

1 time

Note You cannot check the remaining battery immediately after the unit is turned on, or during the procedure for pairing.

When the battery is almost empty The indicator (red) flashes slowly automatically. When the battery becomes empty, the unit will turn off automatically.

Caution If this unit detects a problem while charging, the indicator (red) may turn off, although charging is not complete. Check for the following causes: Ambient temperature exceeds the range

of 0 C 40 C (32 F 104 F). There is a problem with the battery.

In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer.

Notes If the battery is not used for a long time,

battery may be quickly depleted, however, after a few recharges, battery life will improve.

If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery.

Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave in a car parked in the sun.

Use only the supplied AC power adaptor. Do not use any other AC power adaptor.

Usage hours*

Status

Music playback time (up to)

* Time stated above may vary, depending on ambient temperature or conditions of use.

01US03GET+U2.p65 8/8/07, 1:27 pm9

10 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Pairing What is pairing?

Bluetooth devices need to be paired with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: When pairing information is

deleted after repair, etc. When this unit is paired with 9 or

more devices. This unit can be paired with 8 Bluetooth devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.

When recognition of the unit by the device to be connected is deleted.

When this unit is initialized (page 20). All pairing information is deleted.

Note Passcode* of this unit is fixed at 0000. This unit cannot be paired with a Bluetooth receiving device whose Passcode is not 0000.

* Passcode may be called Passkey, PIN code, PIN number, or Password.

Procedures of pairing

1 Place a Bluetooth receiving device within 1 m (3 ft) of this unit.

2 Press and hold the POWER button for 7 seconds or more to standby for pairing while the unit is turned off. The indicator (blue) and the indicator (red) start flashing together and this unit starts searching the Bluetooth receiving device.

Notes After about 3 seconds, power is

turned on and the indicator (blue) and indicator (red) flash together twice. Keep the button pressed without releasing until both indicators start flashing together, then release the button. This unit enters into pairing mode.

If pairing is not established within about 5 minutes, pairing mode will be canceled and this unit will turn off. In this case, start over from step 1.

01US03GET+U2.p65 8/8/07, 1:27 pm10

11 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

3 Set the Bluetooth receiving device to pairing mode. This unit searches the Bluetooth receiving device automatically, and pairs the device. The unit tries to connect the Bluetooth receiving device soon after detecting it. When the Bluetooth connection is made properly, the indicator (red) goes off and the indicator (blue) starts flashing more slowly, indicating pairing is complete and pairing information is memorized on this unit.

Notes If Passcode input is required on

the Bluetooth receiving device, input 0000.

The message standing for Pairing complete appears on the display of some Bluetooth receiving devices.

When pairing is complete, some Bluetooth devices may connect with the unit automatically.

Tips To pair with other Bluetooth devices,

repeat steps 1 to 3 for each device. To delete all pairing information, see

Initializing the unit (page 20).

01US03GET+U2.p65 8/8/07, 1:27 pm11

12 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Indications of Bluetooth function B : Indicator (blue) R : Indicator (red)

Status Flashing patterns

Pairing B ...

R ...

Connecting B ...

R

Listening B ...

R

With no music B ...

R C on

ne ct

ed

01US03GET+U2.p65 8/8/07, 1:27 pm12

13 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Check the following before operating the unit. Pairing of this unit and the

Bluetooth receiving device is complete.

The Bluetooth receiving device is on standby for connection.

The Bluetooth receiving device supports the receiving music function (profile: A2DP*).

1 Connect the stereo mini plug of this unit to the headphone jack of a stereo audio source device.

Note When connecting to a stereo audio source device, be sure to connect this unit to the headphone jack, not to the LINE OUT jack.

Listening to music 2 Turn on the stereo

audio source device.

3 Press and hold the POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice, then the unit is turned on. After the unit is turned on, it connects to the Bluetooth receiving device automatically.

Notes Do not press and hold the

POWER button for more than 7 seconds, otherwise pairing mode is entered.

Make sure to turn on only the Bluetooth receiving device you want to connect with this unit. If many Bluetooth receiving devices are turned on, the connection may not be done as you desire.

If this unit cannot make the Bluetooth connection with a paired device, pair the device again, or try making the Bluetooth connection from the Bluetooth receiving device if possible.

Tips While searching a Bluetooth

receiving device, the indicator (blue) keeps flashing.

OPERATING THE UNIT

POWER button

Continued

01US04OPE+U2.p65 8/8/07, 1:27 pm13

14 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

If two or more devices are paired with this unit, this unit tries to connect with either of the last two devices recognized before.

Bluetooth connection of this unit is established with A2DP (Advanced Audio Distribution Profile)*.

For details on how to operate the Bluetooth receiving device, refer to the operating instructions supplied with the device.

* For details on profiles, see page 4.

4 Start playing on the stereo audio source device connected to this unit.

Notes If sound is distorted, turn down

the volume of the connected device.

If volume is low or noise occurs, turn up the volume of the connected device.

Turn off the bass boost function or equalizer function. If these functions are on, sound may be distorted.

Tips Turn up the volume of the stereo

audio source device as high as possible to the extent that sound is not distorted, then adjust the volume on the Bluetooth receiving device to a moderate level.

If this unit is in your bag, the Bluetooth connection may decline. Clip this unit on the bag.

Notes Even if the Bluetooth receiving device

supports AVRCP (Audio Video Remote Control Profile), this unit cannot perform playback control functions.

In the following cases, you need to make the Bluetooth connection again. The power of this unit does not turn

on. The power of the Bluetooth stereo

audio receiving device does not turn on, or the Bluetooth function is off.

The Bluetooth function of this unit or the Bluetooth stereo audio receiving device is in sleep mode.

The Bluetooth connection is not made.

To stop use

1 Turn off the Bluetooth receiving device.

2 Press and hold the POWER button on this unit for about 3 seconds. The indicator (blue) and indicator (red) light up together, and the unit turns off.

Tip When you finish playing music, the Bluetooth connection may terminate automatically, depending on the Bluetooth device.

01US04OPE+U2.p65 8/8/07, 1:27 pm14

15 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Disposing of the unit For environmental conservation, be sure to remove the built-in rechargeable battery from the unit before disposing, and dispose of the battery appropriately.

ADDITIONAL INFORMATION

1 Remove 2 screws.

2 Open the case and detach the connector.

3 Remove the rechargeable battery and dispose of it.

Rechargeable battery

01US05ADD+U2.p65 8/8/07, 1:27 pm15

16 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Precautions

On Bluetooth communication Bluetooth wireless technology operates

within a range of about 10 m (about 30 ft). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment.

The aerial is built into the unit as illustrated in the dotted line. The sensitivity of Bluetooth communication will improve by turning the direction of the built-in aerial to the connected Bluetooth device. The communication distance shortens when the obstacles are between the aerial of the connected device and this unit.

The following conditions may affect the sensitivity of Bluetooth communication. There is an obstacle such as human

body, metal, or wall between this unit and Bluetooth device.

A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit.

Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such a case, perform the following.

Use this unit at least 10 m (about 30 ft) away from the wireless LAN device.

If this unit is used within 10 m (about 30 ft) of a wireless LAN device, turn off the wireless LAN device.

Install this unit and Bluetooth device as near to each other as possible.

Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present,

in a hospital, train, airplane, or a gas station

near automatic doors or a fire alarm This unit supports security

capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology.

We do not take any responsibility for the leakage of information during Bluetooth communication.

Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth

function is required to conform to the Bluetooth standard specified by Bluetooth SIG, Inc. and be authenticated.

Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

Depending on the device to be connected, it may require some time to start communication.

Location of built-in aerial

01US05ADD+U2.p65 8/8/07, 1:27 pm16

17 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Notes on using in a car Do not attempt to connect this unit, or

to operate this unit, an audio output device or a car radio while driving or waiting at a traffic signal.

Make sure this unit and the device connected to this unit are fixed firmly before driving to avoid an accident or damage.

Route all the cable connected to this unit properly so that they will not interfere with your driving or become entangled in parts of the car interior (seat, door, etc.).

On the supplied AC power adaptor Use the AC power adaptor supplied

with this unit. Do not use any other AC power adaptor since it may cause the unit to malfunction.

Polarity of the plug

If you are not going to use this unit for a long time, unplug the AC power adaptor from the AC outlet. To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself; never pull the cord.

Others Do not place the unit in any of the

following locations. Direct sunlight, near a heater, or other

extremely high-temperature location Dusty location Location exposed to large amounts of

vibration Bathroom or other high-humidity

location In a car subject to the direct rays of

the sun. Do not drop, hit, or otherwise expose

the unit to strong shock of any kind. This could damage the product.

If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer.

Do not allow small children to use this unit.

If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

01US05ADD+U2.p65 8/8/07, 1:27 pm17

18 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer.

Cannot make the Bluetooth connection. , Check that this unit is turned on. , Check that the Bluetooth connecting

device is turned on and the Bluetooth function is on.

, Connection with the Bluetooth device may not be memorized on this unit. Make the Bluetooth connection from the Bluetooth device to this unit soon after pairing is complete.

, This unit or Bluetooth connecting device is in sleep mode.

, The Bluetooth connection is terminated. Make the Bluetooth connection again.

Cannot operate the unit. (Connection has hung up.) , Press the RESET button. Pairing

information is not deleted by this operation.

Common

The unit is not turned on. , Charge the battery of the unit. , The unit is not turned on while

charging. Remove the unit from the battery charging stand and then turn on the unit.

Sound skips or the correspondence distance is short. , If a device that generates

electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources.

, Remove any obstacle between this unit and other Bluetooth device or move away from the obstacle.

, Locate this unit and other Bluetooth device(s) as near as possible.

, Re-position this unit.

Pairing cannot be done. , Bring this unit and the Bluetooth

device closer together.

01US05ADD+U2.p65 8/8/07, 1:27 pm18

19 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

When listening to music

No sound

, Check the connection between this unit and the stereo audio source device connected to this unit.

, Check that both this unit and the Bluetooth stereo audio receiving device are turned on.

, Ensure that this unit is not too far from the Bluetooth stereo audio receiving device, or this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven.

, Check that Bluetooth connection is made properly between this unit and the Bluetooth stereo audio receiving device.

, Turn up the volume of the Bluetooth stereo audio receiving device. For details on volume adjustment, refer to the operating instructions supplied with the Bluetooth stereo audio receiving device.

, Turn up the volume of the stereo audio source device as high as possible to the extent that sound is not distorted.

, Pair this unit and the Bluetooth stereo audio receiving device again (page 10).

Low sound level , Turn up the volume of the stereo

audio source device as high as possible to the extent that sound is not distorted.

, Turn up the volume of the Bluetooth stereo audio receiving device. For details on volume adjustment, refer to the operating instructions supplied with the Bluetooth stereo audio receiving device.

, Connect the audio in plug to the headphone jack instead of the LINE OUT jack.

Distorted sound , Turn down the volume of the stereo

audio source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the stereo audio source device.

, Connect the audio in plug to the headphone jack instead of the LINE OUT jack.

Cannot be connected to a device that has been paired and connected before. , This unit tries to connect with either

of the last two devices recognized before. If this unit cannot make the Bluetooth connection with a paired device, pair the device again, or try making the Bluetooth connection from the Bluetooth stereo audio receiving device if possible.

, Pairing information may be deleted. Pair the device again (page 10).

01US05ADD+U2.p65 8/8/07, 1:27 pm19

20 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Initializing the unit You can reset this unit to its default (such as volume setting) and delete all pairing information.

1 If this unit is turned on, press and hold the POWER button for about 3 seconds to turn off this unit.

2 Press and hold the POWER button and the initialize button together for about 7 seconds. The indicator (blue) and indicator (red) flash together four times, and this unit is reset to the default setting. All pairing information is deleted.

01US05ADD+U2.p65 8/8/07, 1:27 pm20

21 US

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Specifications

General Communication system Bluetooth Specification version 2.0 Output Bluetooth Specification Power Class 2 Frequency band 2.4 GHz band (2.4000 GHz 2.4835 GHz) Maximum communication range Line of sight approx. 10 m (30 ft)*1

Modulation method FHSS Compatible Bluetooth Profile*2

A2DP (Advanced Audio Distribution Profile) Supported codec*3

SBC*4

Audio input Gold-plated L-shaped stereo mini plug 1 Input impedance Approx. 32 Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Dimensions Approx. 25 51 29 mm (1 2 1 3/16 in) (w/h/d) Mass Approx. 21 g (0.7 oz) (including cord)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antennas performance, operating system, software application, etc.

*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.

*3 Codec: Audio signal compression and conversion format

*4 Subband Codec

Supplied accessories AC power adaptor (1) Battery charging stand (1) Operating instructions (this book) (1)

Design and specifications are subject to change without notice.

01US05ADD+U2.p65 8/8/07, 1:27 pm21

2 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

ADVERTENCIA Para reducir el riesgo de incendios o electrocucin, no exponga el aparato a la lluvia ni a la humedad.

Para evitar descargas elctricas, no abra la unidad. En caso de avera, solicite los servicios de personal cualificado.

No site el aparato en un espacio cerrado, como una estantera o un armario empotrado.

Para reducir el riesgo de incendios, no cubra la ventilacin del aparato con peridicos, manteles, cortinas, etc. ni coloque velas encendidas encima del mismo.

Para reducir el riesgo de incendio o sacudida elctrica, no ponga objetos que contengan lquido, tal como floreros, encima del aparato.

Conecte el adaptador de alimentacin de ca a una toma de ca de fcil acceso. Si percibe alguna anormalidad en el adaptador de alimentacin de ca, desconctelo inmediatamente de la toma de ca.

No exponga la pila a fuentes de calor excesivo como luz solar directa, fuego o similar.

Informacin Se le advierte de que la realizacin de cambios o modificaciones no aprobados explcitamente en este manual pueden anular su autoridad para utilizar este equipo.

El equipo no debe colocarse ni utilizarse junto con ninguna otra antena o transmisor.

La marca de la palabra Bluetooth y sus logotipos son propiedad de Bluetooth SIG, Inc. y cualquier uso de los mismos por parte de Sony Corporation se realiza bajo licencia. Las dems marcas y nombres comerciales pertenecen a sus respectivos propietarios.

02ES01TOC+U2.p65 8/8/07, 1:28 pm2

3 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

ES

ndice

Qu es la tecnologa inalmbrica Bluetooth? .................... 4

Bienvenido ........................ 5 Uso de la funcin Bluetooth con

slo 3 pasos ............................ 6

Ubicacin y funcin de los componentes ................ 7

Carga de la unidad ........... 8 Emparejamiento ............. 10

Qu es el emparejamiento? ... 10 Procedimientos de

emparejamiento .................. 10

Indicaciones de la funcin Bluetooth ..................... 12

Escuchar msica ........... 13 Desecho de la unidad .... 15 Precauciones .................. 16 Solucin de problemas ... 18 Inicializacin de la

unidad .......................... 20 Especificaciones ............ 21

Para clientes de los EE UU

RECYCLADO DE BATERIAS DE IONES DE LITIO

Las bateras de iones de litio son reciclables. Usted podr ayudar a conservar el medio ambiente devolviendo las bateras usadas al punto de reciclaje mas cercano. Para ms informacin sobre el reciclado de bateras, llame al nmero gratuito 1-800-822-8837, o visite http://www.rbrc.org/

Precaucin: No utilice bateras de iones de litio daadas o con fugas.

02ES01TOC+U2.p65 8/8/07, 1:28 pm3

4 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Qu es la tecnologa inalmbrica

Sistema de comunicacin y perfiles Bluetooth compatibles de la unidad Un perfil es una estandarizacin de la funcin para cada especificacin del dispositivo Bluetooth. Esta unidad es compatible con el perfil y la versin Bluetooth siguientes:

Sistema de comunicacin: Especificacin Bluetooth versin 2.0

Perfil Bluetooth compatible: A2DP (Advanced Audio Distribution Profile)

Bluetooth? BluetoothTM es una tecnologa inalmbrica de corto alcance que permite la comunicacin inalmbrica de datos entre dispositivos digitales como, por ejemplo, una computadora o una cmara digital. La tecnologa inalmbrica Bluetooth funciona en un rango de aproximadamente 10 metros. Lo habitual es conectar dos dispositivos, pero algunos dispositivos admiten la conexin a varios dispositivos a la vez.* No es necesario utilizar un cable para realizar la conexin, ni tampoco es necesario encarar los dispositivos entre s, como sucede con la tecnologa de infrarrojos. Por ejemplo, puede utilizar los dispositivos en una bolsa o en un bolsillo. El estndar Bluetooth es una convencin internacional reconocida y utilizada por miles de empresas de todo el mundo.

* Esta unidad no puede conectarse a varios dispositivos a la vez.

02ES02FEA+U2.p65 8/8/07, 1:28 pm4

5 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Bienvenido Gracias por adquirir el transmisor estreo porttil de Sony. Esta unidad utiliza la tecnologa inalmbrica Bluetooth.

Transmisor inalmbrico para el flujo de msica estreo de alta calidad del reproductor de msica digital.

Transmite msica a otros dispositivos con tecnologa inalmbrica Bluetooth.*

Prctica funcin de recarga.

Disfrute escuchando msica

* El dispositivo Bluetooth conectado debe ser compatible con el perfil A2DP (Advanced Audio Distribution Profile).

02ES02FEA+U2.p65 8/8/07, 1:28 pm5

6 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Uso de la funcin Bluetooth con slo 3 pasos

En el ejemplo siguiente se describe cmo transmitir msica reproducida en el dispositivo de audio conectado a la unidad y escuchar msica en un dispositivo Bluetooth receptor de audio estreo (auriculares, sistema de audio estreo, etc.).

Emparejamiento Permite que un dispositivo Bluetooth receptor de audio estreo y esta unidad se puedan reconocer mutuamente.

Conexin Bluetooth Al encender la unidad, se activa automticamente la conexin Bluetooth entre la unidad y el dispositivo Bluetooth receptor de audio estreo.

Transmisin de msica Puede escuchar la msica que se reproduce en el reproductor de audio porttil, etc. conectado a esta unidad a travs de un sistema Bluetooth de recepcin de audio.

b

v

Transmisor estreo porttil

Conexin

Emparejamiento

Seal de audio estreo (Flujo)

Dispositivo de audio

Para obtener ms informacin, consulte las pginas 10 y 11.

Para obtener ms informacin, consulte las pginas 13 y 14.

Dispositivo Bluetooth receptor de audio estreo

02ES02FEA+U2.p65 8/8/07, 1:28 pm6

7 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Ubicacin y funcin de los componentes

1 Botn de inicializacin 2 Indicador (rojo)

Indica el estado de la alimentacin de la unidad.

3 Indicador (azul) Indica el estado de la comunicacin de la unidad.

4 Botn POWER 5 Clavija de entrada de

audio (miniclavija estreo dorada en forma de L) Se conecta a la toma de auriculares de un reproductor de audio porttil, etc.

6 Botn RESET Plselo cuando la unidad est inoperante. Con esta operacin no se elimina la informacin de emparejamiento.

7 Clip de sujecin Ajuste el clip de sujecin en el ngulo deseado y fjelo en el bolso o maletn.

8 Punto de contacto para el soporte de carga de la batera

PROCEDIMIENTOS INICIALES

02ES03GET+U2.p65 8/8/07, 1:28 pm7

8 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

1 Conecte el adaptador de alimentacin de ca suministrado con el soporte de carga de la batera.

2 Conecte el adaptador de alimentacin de ca suministrado a un tomacorriente de ca.

Carga de la unidad La unidad contiene una batera de iones de litio recargable, que se debe cargar antes de utilizarla por primera vez.

Soporte de carga de la batera (suministrado)

(Parte posterior)

Adaptador de alimentacin de ca (suministrado)

3 Coloque la unidad en el soporte de carga de la batera.

Nota Si el clip de sujecin est girado, la unidad no se puede colocar en el soporte de carga de la batera y la carga no se iniciar. Coloque de nuevo el clip de sujecin en su posicin original antes de iniciar la carga.

Coloque la unidad sobre el soporte de carga de la batera de modo que el punto de contacto de la unidad coincida con el pin de contacto de dicho soporte, y asegrese de que el indicador (rojo) se ilumine. La carga se completa en aproximadamente 3 horas* y el indicador (rojo) se apaga automticamente. * Tiempo necesario para volver a cargar

una batera agotada.

a un tomacorriente de ca

Soporte de carga de la batera (suministrado)

Transmisor estreo porttil

Pin de contacto

02ES03GET+U2.p65 8/8/07, 1:28 pm8

9 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Duracin aproximada

11 horas

Estado

Completa

Media

Baja (debe cargarla)

Sugerencia Al cargar la batera, la unidad se apaga automticamente.

Precaucin Si la unidad detecta un problema durante la carga, es posible que el indicador (rojo) se apague aunque no haya finalizado la carga. Compruebe si se debe a las causas siguientes: La temperatura ambiente excede la

gama entre los 0 C y los 40 C. La batera tiene un problema.

En este caso, crguela de nuevo entre las temperaturas indicadas anteriormente. Si el problema persiste, pngase en contacto con el distribuidor Sony ms cercano.

Notas Si no se utiliza la batera durante un

perodo de tiempo prolongado, es posible que la carga se agote rpidamente. Sin embargo, despus de varias recargas, aumentar la duracin.

Si la vida til de la batera recargable incorporada disminuye hasta la mitad de la duracin normal, la batera deber reemplazarse. Para reemplazar la batera recargable, pngase en contacto con el distribuidor Sony ms cercano.

Evite la exposicin de la unidad a temperaturas extremas, la luz solar directa, la humedad, la arena, el polvo o los golpes. No la deje nunca en un automvil estacionado al sol.

Utilice nicamente el adaptador de alimentacin de ca suministrado. No utilice ningn otro adaptador de alimentacin de ca.

Duracin*

Estado

Tiempo de reproduccin de msica (mximo)

* Estos tiempos pueden variar segn la temperatura ambiente o las condiciones de uso.

Comprobacin de la batera restante Si presiona el botn POWER mientras la unidad est encendida, el indicador (rojo) parpadear. Puede comprobar la batera restante mediante el nmero de veces que parpadea el indicador (rojo).

Indicador (rojo)

3 veces

2 veces

1 vez

Nota No es posible comprobar la batera restante inmediatamente despus de encender la unidad ni durante el proceso de emparejamiento.

Cuando la batera est prcticamente agotada El indicador (rojo) parpadea lentamente de forma automtica. Cuando la batera se agota por completo, la unidad se apaga automticamente.

02ES03GET+U2.p65 8/8/07, 1:28 pm9

10 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Emparejamiento

Qu es el emparejamiento?

Los dispositivos Bluetooth deben emparejarse previamente entre s. Una vez que los dispositivos Bluetooth se emparejaron, no es necesario volver a hacerlo excepto en los casos siguientes: Cuando la informacin de

emparejamiento se elimin tras una reparacin, etc.

Cuando la unidad se emparej con 9 o ms dispositivos. Esta unidad se puede emparejar con hasta 8 dispositivos Bluetooth; si se empareja un noveno dispositivo, ste reemplazar al dispositivo con la fecha de conexin ms antigua de los 8 restantes.

Cuando se elimina el reconocimiento de la unidad en el dispositivo que desea conectar.

Cuando se inicializ esta unidad (pgina 20). Se elimina toda la informacin de emparejamiento.

Nota El cdigo de acceso* de la unidad es 0000. Esta unidad no podr emparejarse con otro dispositivo Bluetooth receptor cuyo cdigo de acceso no sea 0000.

* Es posible que se denomine al cdigo de acceso clave de acceso, cdigo PIN, nmero PIN o contrasea.

Procedimientos de emparejamiento

1 Coloque el dispositivo Bluetooth receptor a 1 metro como mximo de la unidad.

2 Mantenga presionado el botn POWER durante 7 segundos como mnimo para que el emparejamiento entre en modo de espera mientras se apaga la unidad. Los indicadores (azul) y (rojo) empiezan a parpadear a la vez y la unidad inicia la bsqueda de dispositivos Bluetooth receptores.

02ES03GET+U2.p65 8/8/07, 1:28 pm10

11 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Notas Transcurridos 3 segundos

aproximadamente, la alimentacin se enciende, y los indicadores (azul) y (rojo) parpadean juntos dos veces. Mantenga presionado el botn hasta que ambos indicadores comiencen a parpadear a la vez y, a continuacin, sultelo. La unidad pasa al modo de emparejamiento.

Si el emparejamiento no se estableci en unos 5 minutos, el modo de emparejamiento se cancelar y la unidad se apagar. En tal caso, vuelva a comenzar desde el paso 1.

3 Ajuste el dispositivo Bluetooth receptor en el modo de emparejamiento. La unidad buscar automticamente otro dispositivo Bluetooth receptor y lo emparejar. La unidad intentar conectar el dispositivo Bluetooth receptor tan pronto como lo detecte. Cuando la conexin Bluetooth se haya realizado correctamente, el indicador (rojo) se apagar y el indicador (azul) empezar a parpadear lentamente, lo que indica que el emparejamiento finaliz y que la informacin de emparejamiento se memoriz en la unidad.

Notas Si se solicita un cdigo de acceso

en el dispositivo Bluetooth receptor, introduzca 0000.

En la pantalla de algunos dispositivos Bluetooth receptores aparecer un mensaje que indica que finaliz el emparejamiento.

Es posible que algunos dispositivos Bluetooth se conecten directamente con esta unidad al finalizar el emparejamiento.

Sugerencias Para realizar un emparejamiento con

otro dispositivo Bluetooth, repita los pasos del 1 al 3 para cada uno de ellos.

Para eliminar toda la informacin de emparejamiento, consulte Inicializacin de la unidad (pgina 20).

02ES03GET+U2.p65 8/8/07, 1:28 pm11

12 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Indicaciones de la funcin Bluetooth B : Indicador (azul) R : Indicador (rojo)

Estado Patrones de parpadeo

Emparejamiento B ...

R ...

Conexin B ...

R

Escucha B ...

R

Sin reproduccin B ...

de msica R

C on

ex i

n es

ta bl

ec id

a

02ES03GET+U2.p65 8/8/07, 1:28 pm12

13 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Escuchar msica 2 Encienda el dispositivo

fuente de audio estreo.

3 Con la unidad apagada, mantenga presionado el botn POWER durante aproximadamente 3 segundos. Los indicadores (azul) y (rojo) parpadean al unsono dos veces y, a continuacin, la unidad se enciende. Tras encenderse, la unidad se conecta automticamente con el dispositivo Bluetooth receptor.

Notas No mantenga presionado el botn

POWER durante ms de 7 segundos. De lo contrario, la unidad entrar en el modo de emparejamiento.

Asegrese de encender slo el dispositivo Bluetooth receptor que desee conectar con esta unidad. Si hay ms de un dispositivo Bluetooth receptor encendido, es posible que la conexin no se realice como desea.

Si esta unidad no puede llevar a cabo la conexin Bluetooth con un dispositivo emparejado, vuelva a emparejarlos, o bien intente realizar la conexin Bluetooth desde el dispositivo Bluetooth receptor si es posible.

USO DE LA UNIDAD

Antes de utilizar la unidad, compruebe los puntos siguientes. El emparejamiento de esta unidad

y el dispositivo Bluetooth receptor finaliz.

El dispositivo Bluetooth receptor se encuentra en espera para realizar la conexin.

El dispositivo Bluetooth receptor admite la funcin de recepcin de msica (perfil: A2DP*).

1 Conecte la miniclavija estreo de la unidad a la toma de auriculares de un dispositivo fuente de audio estreo.

Nota Cuando realice la conexin a un dispositivo fuente de audio estreo, asegrese de que conecta la unidad a la toma de auriculares y no a la toma LINE OUT.

Botn POWER

Contina

02ES04OPE+U2.p65 8/8/07, 1:28 pm13

14 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Notas Aunque el dispositivo Bluetooth

receptor admita el perfil AVRCP (Audio Video Remote Control Profile), la unidad no podr realizar funciones de control de la reproduccin.

En los casos siguientes, deber volver a realizar la conexin Bluetooth. La alimentacin de esta unidad no se

enciende. La alimentacin del dispositivo

Bluetooth receptor de audio estreo no se enciende o la funcin Bluetooth est desactivada.

La funcin Bluetooth de esta unidad o el dispositivo Bluetooth receptor de audio estreo se encuentra en modo de desconexin temporal.

No se realiz la conexin Bluetooth.

Para detener el uso

1 Apague el dispositivo Bluetooth receptor.

2 Mantenga presionado el botn POWER de la unidad durante unos 3 segundos. Los indicadores (azul) y (rojo) se iluminan a la vez y la unidad se apaga.

Sugerencia Cuando finalice la reproduccin de msica, es posible que la conexin Bluetooth finalice automticamente, segn el dispositivo Bluetooth que se utilice.

Sugerencias El indicador (azul) sigue

parpadeando mientras la unidad busca un dispositivo Bluetooth receptor.

Si se emparejan dos o ms dispositivos con la unidad, sta intentar conectar con uno de los dos ltimos dispositivos que reconoci anteriormente.

Se estableci la conexin Bluetooth de la unidad con el perfil A2DP (Advanced Audio Distribution Profile)*.

Para obtener ms informacin sobre el funcionamiento del dispositivo Bluetooth receptor, consulte las instrucciones de funcionamiento suministradas con el dispositivo.

* Para obtener ms informacin sobre los perfiles, consulte la pgina 4.

4 Inicie la reproduccin en el dispositivo fuente de audio estreo conectado a la unidad. Notas Si el sonido aparece distorsionado,

baje el volumen del dispositivo conectado.

Si el volumen es bajo o aparece ruido, suba el volumen del dispositivo conectado.

Desactive las funciones de potenciacin de graves y ecualizador. Si estn activadas, el sonido podra distorsionarse.

Sugerencias Suba el volumen del dispositivo

fuente de audio estreo al mximo posible siempre que no se distorsione el sonido y, a continuacin, ajuste el volumen del dispositivo Bluetooth receptor en un nivel moderado.

Si la unidad se encuentra en un bolso, es posible que la conexin Bluetooth pierda calidad. Fije la unidad en el bolso.

02ES04OPE+U2.p65 8/8/07, 1:28 pm14

15 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Desecho de la unidad Para una mejor conservacin del medio ambiente, asegrese de retirar la batera recargable incorporada antes de deshacerse de la unidad y proceda al desecho de dicha batera de la forma adecuada.

INFORMACIN COMPLEMENTARIA

1 Retire los 2 tornillos.

2 Abra la carcasa y extraiga el conector.

3 Extraiga la batera recargable y deschela.

Batera recargable

02ES05ADD+U2.p65 8/8/07, 1:29 pm15

16 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Precauciones Comunicacin Bluetooth La tecnologa inalmbrica Bluetooth

funciona en un rango de aproximadamente 10 metros. El rango mximo de comunicacin puede variar en funcin de los obstculos (persona, objetos metlicos, paredes, etc.) o del entorno electromagntico.

La antena est incorporada en la unidad como se muestra con la lnea de puntos. La sensibilidad de la comunicacin Bluetooth mejorar al girar la antena incorporada en la unidad hacia el dispositivo Bluetooth conectado. La distancia de comunicacion se reduce cuando existen obstaculos entre la antena del dispositivo conectado y esta unidad.

Las condiciones siguientes pueden afectar la sensibilidad de la comunicacin Bluetooth. La existencia de obstculos como,

por ejemplo, persona, un objeto metlico o una pared entre esta unidad y el dispositivo Bluetooth.

El uso de dispositivos que utilicen una frecuencia de 2,4 GHz como, por ejemplo, un dispositivo LAN inalmbrico, un telfono inalmbrico o un microondas cerca de la unidad.

Como los dispositivos Bluetooth y las LAN inalmbricas (IEEE802.11b/g) utilizan la misma frecuencia, pueden

producirse interferencias de microondas que provoquen el deterioro de la velocidad de la comunicacin, la aparicin de ruido o una conexin no vlida si la unidad se utiliza cerca de un dispositivo LAN inalmbrico. En este caso, realice el procedimiento siguiente. Utilice esta unidad a una distancia

mnima de 10 m del dispositivo LAN inalmbrico.

Si utiliza esta unidad a menos de 10 m de un dispositivo LAN inalmbrico, apague el dispositivo LAN inalmbrico.

Instale esta unidad y el dispositivo Bluetooth a la distancia ms corta posible entre s.

Las microondas que emite un dispositivo Bluetooth pueden afectar el funcionamiento de dispositivos mdicos electrnicos. Apague esta unidad y los dems dispositivos Bluetooth en los lugares siguientes, ya que podran provocar un accidente: donde exista gas inflamable, en un

hospital, tren, avin o gasolinera cerca de puertas automticas o

alarmas de incendios Esta unidad admite capacidades de

seguridad que cumplen con el estndar Bluetooth para proporcionar una conexin segura al utilizar la tecnologa inalmbrica Bluetooth, pero es posible que la seguridad no sea suficiente segn el ajuste. Tenga cuidado al realizar una comunicacin con la tecnologa inalmbrica Bluetooth.

No se aceptan responsabilidades por la prdida de informacin que pudiera producirse durante una comunicacin Bluetooth.

No se puede garantizar la conexin con todos los dispositivos Bluetooth. Un dispositivo que disponga de la

funcin Bluetooth debe cumplir el estndar Bluetooth especificado por Bluetooth SIG, Inc. y estar autenticado.

Ubicacin de la antena incorporada

02ES05ADD+U2.p65 8/8/07, 1:29 pm16

17 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Incluso en el caso de que el dispositivo conectado cumpla el estndar Bluetooth mencionado anteriormente, es posible que algunos dispositivos no puedan conectarse o funcionar correctamente, segn las caractersticas o las especificaciones del dispositivo.

En funcin del dispositivo que vaya a conectarse, es posible que transcurra cierto tiempo antes de que se inicie la comunicacin.

Notas sobre el uso en un automvil No intente conectar ni utilizar la unidad,

un dispositivo de audio porttil o una radio de automvil mientras maneja o espera ante una seal de trfico.

Antes de empezar a manejar, asegrese de fijar de forma segura la unidad y el dispositivo conectado a sta para evitar accidentes o daos.

Dirija todo el cable conectado a la unidad debidamente de forma que no interfiera en el manejo ni quede atrapado con otras partes del interior del automvil (asiento, puerta, etc.).

Adaptador de alimentacin de ca suministrado Utilice solamente el adaptador de

alimentacin de ca suministrado con esta unidad. No utilice ningn otro adaptador de alimentacin de ca, ya que puede causar un mal funcionamiento de la unidad.

Polaridad de la clavija

Si no va a utilizar la unidad durante un perodo prolongado de tiempo, desconecte el adaptador de alimentacin de ca del tomacorriente de ca. Para retirar el adaptador de alimentacin de ca del tomacorriente de pared, tire del adaptador, nunca del cable.

Otros No coloque la unidad en ninguno de los

lugares siguientes. Cerca de un calefactor, o en un lugar

expuesto a la luz solar directa o a temperaturas extremadamente elevadas

En un lugar polvoriento En un lugar expuesto a fuertes

vibraciones En un cuarto de bao o en un lugar en

el que se condense mucha humedad Dentro de un automvil expuesto a la

luz solar directa. No deje caer, golpee ni exponga la

unidad a impactos fuertes de ningn tipo ya que, de lo contrario, podran producirse daos en el producto.

Si no se siente cmodo despus de utilizar el dispositivo Bluetooth, deje de utilizarlo inmediatamente. Si el problema persiste, consulte con el distribuidor Sony ms cercano.

No permita que los nios utilicen esta unidad.

Si desea realizar alguna consulta o solucionar algn problema relativo a la unidad que no se trate en este manual, pngase en contacto con el distribuidor Sony ms cercano a su domicilio.

02ES05ADD+U2.p65 8/8/07, 1:29 pm17

18 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Solucin de problemas Si tiene dificultades para utilizar esta unidad, srvase de la siguiente lista de comprobaciones y consulte la informacin de ayuda del producto en nuestro sitio Web. Si el problema persiste, consulte con el distribuidor Sony ms cercano.

Comn

La unidad no se enciende , Cargue la batera de la unidad. , La unidad no se enciende mientras se

carga. Retire la unidad del soporte de carga de la batera y encindala.

Se producen saltos en el sonido o la distancia de correspondencia es corta , Si hay cerca un dispositivo que

genera radiacin electromagntica como, por ejemplo, una red LAN inalmbrica, otro dispositivo Bluetooth o un microondas, aleje la unidad de estas fuentes.

, Retire cualquier obstculo entre la unidad y el otro dispositivo Bluetooth o aljese del obstculo.

, Coloque esta unidad y el otro dispositivo Bluetooth lo ms cerca posible.

, Cambie de posicin la unidad.

No se puede llevar a cabo el emparejamiento , Acerque esta unidad y el dispositivo

Bluetooth.

No se realiz la conexin Bluetooth , Compruebe que la unidad est

encendida. , Compruebe que el dispositivo

Bluetooth que desea conectar est encendido y que la funcin Bluetooth est activada.

, Es posible que la unidad no memorice la conexin con el dispositivo Bluetooth. Realice la conexin Bluetooth del dispositivo Bluetooth a la unidad inmediatamente despus de finalizar el emparejamiento.

, Esta unidad o el dispositivo Bluetooth que desea conectar est en modo en espera.

, Finaliz la conexin Bluetooth. Realice la conexin Bluetooth de nuevo.

La unidad no funciona (se colg la conexin) , Presione el botn RESET. Al realizar

esta operacin, la informacin del emparejamiento no se elimina.

Al escuchar msica

No hay sonido , Compruebe la conexin entre esta

unidad y el dispositivo fuente de audio estreo conectado a la unidad.

, Compruebe que tanto la unidad como el dispositivo Bluetooth receptor de audio estreo estn encendidos.

, Asegrese de que la unidad no se encuentra demasiado alejada del dispositivo Bluetooth receptor de audio estreo, o de que no recibe interferencias de una red LAN inalmbrica, de otro dispositivo inalmbrico de 2,4 GHz o de un microondas.

02ES05ADD+U2.p65 8/8/07, 1:29 pm18

19 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

, Compruebe que la conexin Bluetooth entre la unidad y el dispositivo Bluetooth receptor de audio estreo se realiz correctamente.

, Suba el volumen del dispositivo Bluetooth receptor de audio estreo. Si desea obtener informacin detallada sobre el ajuste del volumen, consulte el manual de instrucciones suministrado con el dispositivo Bluetooth receptor de audio estreo.

, Suba el volumen del dispositivo fuente de audio estreo al mximo posible sin que se produzca una distorsin del sonido.

, Empareje la unidad y el dispositivo Bluetooth receptor de audio estreo de nuevo (pgina 10).

El nivel del sonido es bajo , Suba el volumen del dispositivo

fuente de audio estreo al mximo posible sin que se produzca una distorsin del sonido.

, Suba el volumen del dispositivo Bluetooth receptor de audio estreo. Si desea obtener informacin detallada sobre el ajuste del volumen, consulte el manual de instrucciones suministrado con el dispositivo Bluetooth receptor de audio estreo.

, Conecte la clavija de entrada de audio a la toma de auriculares en vez de a la toma LINE OUT.

El sonido aparece distorsionado , Baje el volumen del dispositivo

fuente de audio estreo hasta que el sonido deje de aparecer distorsionado. Si desea obtener informacin detallada sobre el ajuste del volumen, consulte el manual de instrucciones suministrado con el dispositivo fuente de audio estreo.

, Conecte la clavija de entrada de audio a la toma de auriculares en vez de a la toma LINE OUT.

No es posible establecer una conexin con un dispositivo que se emparej y conect anteriormente , La unidad intenta establecer una

conexin con alguno de los dos ltimos dispositivos que reconoci anteriormente. Si la unidad no puede realizar la conexin Bluetooth con un dispositivo emparejado, empareje el dispositivo de nuevo o, si es posible, intente establecer la conexin Bluetooth desde el dispositivo Bluetooth receptor de audio estreo.

, Es posible que la informacin de emparejamiento se elimine. Empareje el dispositivo de nuevo (pgina 10).

02ES05ADD+U2.p65 8/8/07, 1:29 pm19

20 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Inicializacin de la unidad Puede restablecer la unidad a la configuracin predeterminada (as como el volumen) y eliminar la informacin de emparejamiento.

1 Si la unidad est encendida, mantenga presionado el botn POWER durante unos 3 segundos para apagarla.

2 Mantenga pulsado el botn POWER y el de inicializacin a la vez durante unos 7 segundos. Los indicadores (azul) y (rojo) parpadearn juntos cuatro veces y la unidad se restablecer a los ajustes predeterminados. Toda la informacin de emparejamiento se elimina.

02ES05ADD+U2.p65 8/8/07, 1:29 pm20

21 ES

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)

Especificaciones

Generales Sistema de comunicacin Especificacin Bluetooth versin 2.0

Salida Clase de potencia 2 de especificacin Bluetooth

Banda de frecuencia Banda de 2,4 GHz (2,4000 GHz 2,4835 GHz)

Rango de comunicacin mximo Lnea de vista de aprox. 10 m *1

Mtodo de modulacin FHSS

Perfil Bluetooth compatible*2

A2DP (Advanced Audio Distribution Profile)

Cdec admitido*3

SBC*4

Entrada de audio 1 miniclavija estreo dorada en forma de L

Impedancia de entrada Aprox. 32

Fuente de alimentacin cc de 3,7 V: Batera recargable de iones de litio incorporada

Dimensiones Aprox. 25 51 29 mm (an/al/prf)

Peso Aprox. 21 g (incluyendo el cable)

*1 El rango real variar en funcin de factores como, por ejemplo, los obstculos que puedan interponerse entre los dispositivos, los campos magnticos que puedan existir en torno a hornos microondas, la electricidad esttica, interferencias, las condiciones de las ondas radioelctricas, la sensibilidad de recepcin o el rendimiento de la antena, del sistema operativo, de la aplicacin de software, etc.

*2 Los perfiles estndar Bluetooth indican la finalidad de la comunicacin Bluetooth entre dispositivos.

*3 Cdec: Formato de compresin y conversin de seal de sonido

*4 Cdec Sub band

Accesorios suministrados Adaptador de alimentacin de ca (1) Soporte del cargador de la batera (1) Manual de instrucciones (este documento) (1)

El diseo y las especificaciones estn sujetos a cambios sin previo aviso.

02ES05ADD+U2.p65 8/8/07, 1:29 pm21

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)02ES05ADD+U2.p65 8/8/07, 1:29 pm22

TMR-BT10A_U2 [US,ES] 3-280-223-11(1)02ES05ADD+U2.p65 8/8/07, 1:29 pm23

Manualsnet FAQs

If you want to find out how the TMR-BT10A Sony works, you can view and download the Sony TMR-BT10A Operating Instructions on the Manualsnet website.

Yes, we have the Operating Instructions for Sony TMR-BT10A as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operating Instructions should include all the details that are needed to use a Sony TMR-BT10A. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony TMR-BT10A Operating Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony TMR-BT10A Operating Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony TMR-BT10A Operating Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony TMR-BT10A Operating Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony TMR-BT10A Operating Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.