Sony AVD-K800P Operating Instructions PDF

HT-C800DP 4-247-292-11(1)

4-247-292-11(1)

2003 Sony Corporation

HT-C800DP

Home Theater System

Operating Instructions

HT-C800DP 4-247-292-11(1)

2GB

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And dont place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Dont throw away the battery with general house waste, dispose of it correctly as chemical waste.

Except for customers in the United States and Canada

This appliance is classified as a CLASS 1 LASER product. The label is located on the rear panel.

For the customers in Europe

The following caution label is located inside the apparatus.

For the customers in the United States

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within

the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Owners Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. _____________ Serial No.______________

CAUTION Use of this appliance with some systems may present a shock or fire hazard. Do not use with any units which have the following marking located near output. WARNING! HAZARDOUS ENERGY!

CAUTION As the laser beam used in this unit is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

This label is located on the rear panel.

WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving

antenna. - Increase the separation between

the equipment and system. - Connect the equipment into an

outlet on a circuit different from that to which the system is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

HT-C800DP 4-247-292-11(1)

3GB

Welcome!

Thank you for purchasing this Sony Home Theater System. Before operating this system, please read this manual thoroughly and retain it for future reference.

ENERGY STAR is a U.S. registered mark. As an ENERGY STAR partner, Sony Corporation has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

Precautions Safety Caution The use of optical

instruments with this product will increase eye hazard.

If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

The unit is not disconnected from the mains as long as it is connected to the mains outlet, even if the unit itself has been turned off.

Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.

Installing Allow adequate air circulation to

prevent internal heat buildup. Do not place the unit on surfaces

(rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

Do not install the unit near heat sources such as radiators, or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.

Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

Keep the unit and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

Do not place heavy objects on the unit.

If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit and cause damage to the lenses. When you first install the unit, or when you move it from a cold to a warm location, wait for about 30 minutes before operating the unit.

Except for customers in Europe

For the customers in Canada CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

HT-C800DP 4-247-292-11(1)

4GB

On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

On cleaning discs Do not use a commercially available CD/DVD cleaning disc. It may cause a malfunction.

On your TVs color If the speakers should cause the TV screen to have color irregularity, turn off the TV at once then turn it on after 15 to 30 minutes. If color irregularity should persist, place the speakers further away from the set.

IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this.

On moving the system Before you move the system, remove all discs. Press x and DISC SELECT 4 on the system simultaneously until MECH LOCK appears on the front panel display. You can then turn off the system and unplug the AC power cord.

Precautions

On power sources AC power cord must be changed only at the qualified service shop.

On placement Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the unit in a confined space where ventilation is poor as this may cause overheating.

The system is equipped with a high power amplifier. If the ventilation slots on the bottom are blocked, the unit can overheat and malfunction.

Do not place the system on a soft surface such as a rug that might block the ventilation holes on the bottom.

Do not place the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

On operation If the system is brought directly from a cold to a

warm location, or is placed in a very damp room, moisture may condense on the lenses inside the system. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.

When you move the system, make sure that you take out all discs. Otherwise, the discs may be damaged.

HT-C800DP 4-247-292-11(1)

5GB continued

Table of Contents WARNING.......................................................................................................... 2 Welcome! ........................................................................................................... 3 Precautions ........................................................................................................ 4 About this Manual .............................................................................................. 7 This System Can Play the Following Discs ........................................................ 7 Notes about the Discs ...................................................................................... 10 Index to Parts and Controls ............................................................................. 11 Guide to the Control Menu Display .................................................................. 16

Getting Started ................................................................ 18 Quick Overview ................................................................................................ 18 Unpacking ........................................................................................................ 18 Inserting Batteries into the Remote ................................................................. 18 Step 1: Speaker System Hookup ..................................................................... 19 Step 2: Antenna Hookups ................................................................................ 22 Step 3: TV and Video Component Hookups .................................................... 24 Speaker Setup ................................................................................................. 26 Presetting Radio Stations ................................................................................ 27

Playing Discs .................................................................. 29 Playing Discs ................................................................................................... 29 Resuming Playback from the Point Where You Stopped the Disc

(Resume Play) ........................................................................................... 31 Using the DVDs Menu ..................................................................................... 31 Playing VIDEO CDs with PBC Functions (PBC Playback) .............................. 32 Playing an MP3 Audio Track ............................................................................ 33 Playing JPEG Image File ................................................................................. 34 To rotate the current image .............................................................................. 36 Creating Your Own Program (Program Play) ................................................... 36 Playing in random order (Shuffle Play) ............................................................ 38 Playing repeatedly (Repeat Play) .................................................................... 39

Searching for a Scene ....................................................... 40 Searching for a Particular Point on a Disc (Scan, Slow-motion Play) .............. 40 Searching for a Title/Chapter/Track/Index/Album/File ...................................... 42

Viewing Information About the Disc ....................................... 44 Viewing the Playing Time and Remaining Time on the Front Panel Display .... 44 Checking the Playing Time and Remaining Time ............................................ 46

HT-C800DP 4-247-292-11(1)

6GB

Sound Adjustments ........................................................... 48 Changing the Sound ........................................................................................ 48 Automatic decoding of the audio input signal (AUTO FORMAT

DIRECT AUTO) .......................................................................................... 50 Enjoying Surround Sound ................................................................................ 50 Using only the front speakers and sub woofer (2 CHANNEL STEREO) ......... 52

Enjoying Movies .............................................................. 53 Changing the Angles ....................................................................................... 53 Displaying the Subtitles ................................................................................... 54

Using Various Additional Functions ....................................... 55 Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) ... 55

Other Operations ............................................................. 61 Controlling the TV with the Supplied Remote .................................................. 61 Using the Video or other Unit ........................................................................... 61 Listening to the Radio ...................................................................................... 62

Settings and Adjustments ................................................... 63 Using the Setup Display .................................................................................. 63 Setting the Display or Sound Track Language (LANGUAGE SETUP) ............. 64 Settings for the Display (SCREEN SETUP) ..................................................... 65 Custom Settings (CUSTOM SETUP) ............................................................... 67 Settings for the Speakers (SPEAKER SETUP) ............................................... 68

Additional Information ....................................................... 71 Troubleshooting ............................................................................................... 71 Glossary .......................................................................................................... 75 Specifications ................................................................................................... 78 Language Code List ......................................................................................... 81 DVD Setup Menu List ...................................................................................... 82 Index ................................................................................................................ 83 Quick reference for Remote Commander ........................................... Back page

HT-C800DP 4-247-292-11(1)

7GB

Symbol Meaning Symbol Meaning

Functions available in DVD video mode

Functions available in VIDEO CD mode

Functions available in CD mode

About this Manual The HT-C800DP consists of:

DVD receiver AVD-K800P Front/Surround speakers

For customers in Europe SS-MSP2 For other customers SS-MSP75

Center speaker For customers in Europe SS-CNP2 For other customers SS-CNP75

Sub woofer SS-WMSP80 The instructions in this manual describe the

controls on the remote. You can also use the controls on the system if they have the same or similar names as those on the remote.

The symbols used in this manual are explained below:

* MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compress audio data.

This System Can Play the Following Discs

z

Terms for discs

Title The longest sections of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software.

Chapter Sections of a picture or a music piece that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded.

Album Section of a music piece or an image on a data CD containing MP3 audio tracks or JPEG files.

Track Sections of a picture or a music piece on a VIDEO CD, CD, or MP3.

Index (CD) / Video Index (VIDEO CD) A number that divides a track into sections to easily locate the point you want on a VIDEO CD. Depending on the disc, no indexes may be recorded.

Scene On a VIDEO CD with PBC functions (page 32), the menu screens, moving pictures and still pictures are divided into sections called scenes.

File Section of a picture on a data CD containing JPEG image files.

continued

Format of discs

DVD VIDEO

VIDEO CD

Audio CD

The DVD VIDEO logo is a trademark.

DVD structure

VIDEO CD or CD structure

Title

Disc

Index

Track

Chapter Disc

MP3 structure

Track

Album

Disc

Disc

File

AlbumJPEG structure

Functions available for MP3* audio tracks

Functions available for JPEG files

More convenient features

HT-C800DP 4-247-292-11(1)

8GB

Note on PBC (Playback Control) (VIDEO CDs)

This system conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD standards. You can enjoy two kinds of playback depending on the disc type.

Region code

Your system has a region code printed on the back of the unit and will only play DVDs labelled with the same region code.

DVDs labelled ALL will also play on this system. If you try to play any other DVD, the message Playback prohibited by area limitations. will appear on the TV screen. Depending on the DVD, no region code indication may be labelled even though playing the DVD is prohibited by area restrictions.

Examples of discs that the system cannot play

The system cannot play the following discs: CD-ROMs (except for extension .MP3,

.JPG or .JPEG) CD-Rs/CD-RWs other than those recorded

in the following formats: music CD format video CD format MP3/JPEG format that conforms to

ISO9660* Level 1/Level 2, or its extended format, Joliet

Data part of CD-Extras DVD-ROMs DVD Audio discs * A logical format of files and folders on CD-ROMs,

defined by ISO (International Standard Organization)

Do not load the following discs: A DVD with a different region code (page

8, 77). A disc that is neither standard nor circular

(e.g., card, heart, or star shape). A disc with paper or stickers on it. A disc that has adhesive or cellophane tape

still left on it.

About Multi Session CD

This system can play Multi Session CDs when an MP3 audio track is contained in the first session. Any subsequent MP3 audio tracks recorded in later sessions can also be played back.

This system can play Multi Session CDs when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back.

If audio tracks and images in music CD format or video CD format are recorded in the first session, only the first session will be played back.

Disc type You can VIDEO CDs without PBC functions (Ver. 1.1 discs)

VIDEO CDs with PBC functions (Ver. 2.0 discs)

Enjoy video playback (moving pictures) as well as music.

Play interactive software using menu screens displayed on the TV screen (PBC Playback), in addition to the video playback functions of Ver. 1.1 discs. Moreover, you can play high-resolution still pictures, if they are included on the disc.

HT-C800DP 4-247-292-11(1)

9GB

Notes

Notes about CD-R/CD-RW/DVD-R/DVD-RW (Video mode) In some cases, CD-R/CD-RW/DVD-R/DVD-RW (Video mode) cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. For more information, see the operating instructions for the recording device. Note that discs created in the Packet Write format cannot be played.

Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this system plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

Copyrights

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents, other intellectual property rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

This system incorporates with Dolby* Digital and Dolby Pro Logic (II) adaptive matrix surround decoder and the DTS** Digital Surround System.

* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license from Digital Theater Systems, Inc. DTS and DTS Digital Surround are trademarks of Digital Theater Systems, Inc.

HT-C800DP 4-247-292-11(1)

10GB

Notes about the Discs

On handling discs To keep the disc clean, handle the disc by

its edge. Do not touch the surface. Do not stick paper or tape on the disc.

Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

After playing, store the disc in its case.

On cleaning Before playing, clean the disc with a

cleaning cloth. Wipe the disc from the center out.

Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.

On playback This system can only playback a standard

circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction.

Do not use a disc that has a commercially available accessory attached, such as a label or ring.

HT-C800DP 4-247-292-11(1)

11GB

Index to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Front Panel

?/1

PHONES

DISC SELECT

MULTI CHANNEL DECODING

1 2 3 4 5 SUB WOOFER

LEVEL

FUNCTIONPRESET +

+MASTER VOLUME

SOUND FIELD

EX-CHANGE DISC SKIP OPEN/CLOSE

+

1 ?/1 (power switch) (29) 2 (remote sensor) (18) 3 MULTI CHANNEL DECODING

indicator (49) 4 Front panel display (12) 5 Disc tray (29) 6 EX-CHANGE (30) 7 DISC SKIP (29) 8 A OPEN/CLOSE (29)

9 SOUND FIELD +/ (50) 0 MASTER VOLUME control (29, 70) qa SUB WOOFER LEVEL (69) qs FUNCTION (29) qd PRESET +/, ./> (27, 30) qf x (stop) (30) qg S (pause) (30) qhH (play) (29) qj DISC SELECT 1 5 (29) qk PHONES jack (29)

continued

HT-C800DP 4-247-292-11(1)

12GB

When playing back a JPEG

REPEAT

Playing status

ALL1DISCS REPEAT1 TRACK M S

PCM PL II

PROGRAM MP3 SHUFFLE

PBC CD VIDEO CD

When playing back a CD, VIDEO CD, or MP3

Playing status Current track number

Current play mode

Lights up during PBC playback (VIDEO CD only)

Playing time

Playing status Current chapter or title number

Playing time

Current play mode

Current sound

Front Panel Display

When playing back a DVD

Current sound (CD only)

REPEAT1 CHAPTER TITLE

ANGLE

H M S

DIGITAL PCM DTSPL II

DVD

Current disc

Lights up during MP3 playback

Lights up when you can change the angle

Current sound

Current file number

Current play mode

HT-C800DP 4-247-292-11(1)

13GB continued

When listening to the radio

FM AM

AUTO MONO ST

kHz MHz

Current band

Preset number Monaural/Stereo effect

Current station

HT-C800DP 4-247-292-11(1)

14GB

Rear Panel

L

R

y

AM

AUDIO IN VIDEO IN FRONT R

SURR R SUB WOOFER SURR L

+ + +

+ + +

FRONT LCENTER SPEAKERS

VOLTAGE SELECTOR

Y

TV

ANTENNA

120V

220V

L

R

AUDIO IN

VIDEO MONITOR COMPONENT VIDEO OUT

VIDEO OUT

PR/CR

PB/CB

1 AM antenna terminals (22) 2 FM 75 COAXIAL antenna jack (22) 3 VOLTAGE SELECTOR (only for

equipped models) (25) 4 Ventilation holes (fan) (74) 5 SPEAKERS jacks (20)

6 COMPONENT VIDEO OUT jacks (24) 7 MONITOR (VIDEO OUT) jack (24) 8 VIDEO (AUDIO L/R IN/VIDEO IN)

jacks (24) 9 TV (AUDIO L/R IN) jacks (24)

HT-C800DP 4-247-292-11(1)

15GB

Remote

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

1 SOUND FIELD +/ (50) 2 FUNCTION (29) 3 ST/MONO (62) 4 BAND (27) 5 REPEAT (39) 6 PLAY MODE (36)

7 Number buttons (31) 8./>, PRESET +/ (27, 30) 9 X (pause) (30) 0H (play) (30) qa DVD MENU/ALBUM + (31) qs DVD TOP MENU/ALBUM (31)

qd C/X/x/c/ENTER (31) qf DVD DISPLAY (33) qg TV VOL +/ (61) qh TV CH +/ (61) qj TV [/1 (on/standby) (61) qk [/1 (on/standby) (29)

ql OPEN/CLOSE (29) w; MEMORY (27) wa D.SKIP (29) ws TIME (43) wd AUDIO (49) wf ANGLE (53)

wg SUBTITLE (54) wh ENTER (31) wj CLEAR (37) wkm/M, TUNING +/,

SLOW / (27, 40) wl x (stop) (30) e; MUTING (30)

ea VOLUME +/ (30, 70) esO RETURN (32) ed TV/VIDEO (61) ef BASS BOOST (61) eg DVD SETUP (57) eh DIMMER (61)

HT-C800DP 4-247-292-11(1)

16GB

Guide to the Control Menu Display

Use the Control Menu to select a function that you would like to use. The Control Menu display appears when the DVD DISPLAY button is pressed. For details, refer to the page in parentheses.

Control Menu

2: FRENCH 3: SPANISH

1: ENGLISH

Select: SUBTITLE

DVD 1:DVD

1 2 ( 2 7 ) MAKING SCENE 1 8 ( 3 4 )

T 1 : 3 2 : 5 5

ENTER

Total number of titles or tracks recorded

Current playing chapter number (Video CD/CD: index number)

Current playing title number (Video CD/CD: track number)

Playing time

Icon of selected Control Menu item

Control Menu items

Function name of selected Control Menu item

Operation message

Total number of chapters or indexes recorded

Playback status (NPlayback, XPause, xStop, etc.)

Type of disc being played back

Current setting

Options

Current playing title name

Disc number

Disc name or disc type

List of Control Menu Items

DISC Displays the disc name or the disc type

inserted into the system.

TITLE (DVD only) (page 42) Selects the title (DVD), the scene (VIDEO

/SCENE (only VIDEO CD in PBC CD in PBC playback), or the track

playback)/TRACK (VIDEO CD only) (VIDEO CD) to be played.

(page 42)

CHAPTER (DVD only) (page Selects the chapter (DVD) or the index

43)/INDEX (VIDEO CD only) (page 43) (VIDEO CD) to be played.

ALBUM (MP3 only) (page 33) Selects the album (MP3) to be played.

TRACK (CD/MP3 only) Selects the track (CD/MP3) to be played.

(page 34)

INDEX (CD only) Displays the index (CD).

TIME (page 43) Checks the elapsed time and the remaining

playback time. Inputs the time code for

picture and music searching.

HT-C800DP 4-247-292-11(1)

17GB

Control Menu display m

Control Menu display off

z Each time you press DVD DISPLAY, the Control Menu display changes as follows:

The Control Menu items are different depending on the disc.

z The Control Menu icon indicator lights up in green t unless you set the REPEAT setting to OFF. The ANGLE indicator lights up in green only when multiple angles are recorded on the disc.

,

AUDIO (DVD/VIDEO CD/ Changes the audio setting.

CD/MP3 only) (page 48)

SUBTITLE (DVD only) Displays the subtitles.

(page 54) Changes the subtitle language.

ALBUM (JPEG only) (page 35) Select the album (JPEG) to be played.

FILE (JPEG only) (page 35) Select the file (JPEG) to be played.

DATE (JPEG only) (page 47) Display the date information.

ANGLE (DVD only) (page 53) Changes the angle.

PLAYMODE (VIDEO CD/CD/ Selects the play mode.

MP3/JPEG only) (page 38)

REPEAT (page 39) Plays the entire disc (all titles/all tracks),

one title/chapter/track/album, or contents

of program repeatedly.

CUSTOM PARENTAL Sets the disc to prohibit playing.

CONTROL (page 55)

HT-C800DP 4-247-292-11(1)

18GB

Quick Overview

This chapter presents a quick overview so you can begin enjoying your new system right away. For selecting a language used in the on-screen display, refer to the page 64. For selecting the aspect ratio of the TV to be connected, refer to the page 65.

Unpacking

Check that you have the following items: Speakers (5) Sub woofer (1) AM loop antenna (1) FM wire antenna (1) Speaker cords (3.5 m 3, 5 m 1, 10 m 2) (12 ft. 3, 17 ft. 1, 33 ft. 2) Video cord (1) Remote Commander (remote) RM-U800 (1) R6 (size AA) batteries (2) Foot pads (24) Color labels for speakers (5) SCART adapter (for the customers in Europe only) (1) Speakers Connection and Installation (card) (1)

Inserting Batteries into the Remote

You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system.

Notes Do not leave the remote in an extremely hot or humid place. Do not use a new battery with an old one. Do not drop any foreign object into the remote casing, particularly when replacing the batteries. Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a

malfunction. If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from

battery leakage and corrosion.

Getting Started

G ettin

g S

tarted

HT-C800DP 4-247-292-11(1)

19GB

Step 1: Speaker System Hookup

Before connecting the speakers, attach the color labels onto the rear panel of the speakers so that you can identify the speakers to be connected. For details on the color, refer to Jacks for connecting the speakers on page 20. Connect the supplied speaker system using the supplied speaker cords by matching the colours of the terminals to those of the cords. Do not connect any speakers other than those supplied with this system. To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on page 68.

Required cords

Speaker cords The connector and the colour tube of the speaker cords are the same colour as the jacks to be connected.

To change the speaker cord

If you want to change the speaker cord, you can detach the supplied speaker cord from the connector.

1 Press the connector onto a flat surface. Make sure that the catcher is at the bottom.

2 Pull the speaker cord from the connector.

3 Twist the stripped ends of the speaker cord you want about 10 mm (3/8 inches) and insert the speaker cord into the connector. Make sure that the speaker cord is inserted according to its polarity: + to + and to .

Colour tube (+)

()

()

catcher

(+)

continued

HT-C800DP 4-247-292-11(1)

20GB

L

R

AUDIO IN VIDEO IN FRONT R + + +

+

FRONT LCENTER SPEAKERS

AUDIO IN VIDEO OUT

PR/CR

PB/CB

Y

TV VIDEO MONITOR COMPONENT VIDEO OUT

L

R

y

AM

VOLTAGE SELECTOR

ANTENNA

120V

220V

SURR R +

SUB WOOFER SURR L +

Front speaker (R)

Center speaker

Front speaker (L)

4 Remove the connector from the flat surface.

Note You can only use the AWG24 to AWG18 speaker cords. Other speaker cord size will not fit the supplied connector.

Jacks for connecting the speakers

Connect the To the Front speakers SPEAKERS FRONT L (white) and R (red) jacks

Surround speakers SPEAKERS SURR L (blue) and R (grey) jacks

Center speaker SPEAKERS CENTER (green) jack

Sub woofer SPEAKERS SUB WOOFER (purple) jack

Surround speaker (L)

Surround speaker (R)

Sub woofer

G ettin

g S

tarted

HT-C800DP 4-247-292-11(1)

21GB

Note on placing speakers

Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result.

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord.

Examples of poor conditions of the speaker cord

After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 70. If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker other than the one currently displayed on the TV display (OSD), the speaker may be short-circuited. If this happens, check the speaker connection again.

Note Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords are reversed, the sound will be distorted and will lack bass.

Stripped cords are touching each other due to excessive removal of insulation.

Stripped speaker cord is touching another speaker terminal.

HT-C800DP 4-247-292-11(1)

22GB

Step 2: Antenna Hookups

Connect the supplied AM and FM antennas to listen to the radio.

Terminals for connecting the antennas

Connect the To the AM loop antenna AM terminals

FM wire antenna FM 75 COAXIAL jack

Notes To prevent noise pickup, keep the AM loop antenna away from the system and other components. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible.

L

R

AUDIO IN VIDEO IN FRONT R

SURR R SUB WOOFER SURR L

+ + +

+ + +

FRONT LCENTER SPEAKERS

AUDIO IN VIDEO OUT

PR/CR

PB/CB

Y

TV VIDEO MONITOR COMPONENT VIDEO OUT

L

R

y

AM

VOLTAGE SELECTOR

ANTENNA

120V

220V

AM loop antenna

FM wire antenna

G ettin

g S

tarted

HT-C800DP 4-247-292-11(1)

23GB

z If you have poor FM reception Use a 75-ohms coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown below.

Note If you connect the system to an outdoor antenna, ground it to protect against lightning. To prevent a gas explosion, do not connect the earth wire to a gas pipe.

y

AM

ANTENNAOutdoor FM antenna System

Earth wire (not supplied)

To earth

HT-C800DP 4-247-292-11(1)

24GB

Step 3: TV and Video Component Hookups

Required cords

Video cord for connecting a TV monitor (supplied)

Audio cords (not supplied) When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.

Jacks for connecting video components

Connect a To the TV monitor MONITOR (VIDEO OUT) jack

VCR VIDEO (AUDIO L/R IN/VIDEO IN) jacks

TV TV (AUDIO L/R IN) jacks

z Connecting the system to a TV (for the customers in Europe only) Connect the system to your TV using the SCART adapter.

zWhen using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the VIDEO jacks Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV accept progressive format signals, you must use this connection and set COMPONENT OUT to PROGRESSIVE in SCREEN SETUP (page 66).

Notes When the mode of the system is not set to DVD, no signal is output from the COMPONENT VIDEO OUT

jacks. When the mode of the system is set to DVD and INTERLACE is selected in SCREEN SETUP, the signal

is output from the MONITOR and COMPONENT VIDEO OUT jacks. When the mode of the system is set to DVD and PROGRESSIVE is selected in SCREEN SETUP, the

signal is output only from the COMPONENT VIDEO OUT jacks.

Red (R/audio) White (L/audio)

Red (R/audio) White (L/audio)

YellowYellow

G ettin

g S

tarted

HT-C800DP 4-247-292-11(1)

25GB

R

L

AUDIO OUT

OUT

R

L

AUDIO OUT

OUT OUT

VIDEO OUT

VIDEO IN

IN

L

FRONT R

SURR R SUB WOOFER SURR L

+ + +

+ + +

FRONT LCENTER SPEAKERS

AUDIO IN

PR/CR

PB/CB

Y

TV COMPONENT VIDEO OUT

L

R

y

AM

VOLTAGE SELECTOR

ANTENNA

120V

220V

AUDIO IN

VIDEO

R

VIDEO IN VIDEO OUT

MONITOR

Selecting the voltage selector

If your unit has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet.

Connecting the AC Power Cord (mains lead)

Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system (see page 19). Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).

TV TV monitorVCR

HT-C800DP 4-247-292-11(1)

26GB

Speaker Setup

For the best possible surround sound, all the speakers other than the sub woofer should be the same distance from the listening position (A). However, this system allows you to place the center speaker up to 1.6 meters (5 feet) closer (B) and the surround speakers up to 4.6 meters (15 feet) closer (C) to the listening position. The front speakers can be placed from 1.0 to 7.0 meters (3 to 23 feet) (A) from the listening position.

Place the speakers as illustrated below. You can place the sub woofer in any position.

Note Do not place the center and surround speakers further away from the listening position than the front speakers.

About magnetically shielded speaker (to prevent colour irregularity occurring on the TV screen) The speakers in this system are magnetically shielded to prevent magnetic leakage. However, some leakage may occur, as a high-strength magnet is employed. If the speakers is used with a CRT-based TV or projector, install the speakers at least 0.3 meters (1 ft) from the TV set, etc. If it is installed too close, colour irregularity may occur on the screen. If colour irregularity occurs, turn off the TV set once, then turn it on after 15 to 30 minutes. If colour irregularity occurs again, place the speakers further away from the TV set. If colour irregularity still occurs after performing the above, make sure that no magnetic object is nearby the speakers. Colour irregularity may occur as a result of interaction between the speakers and the magnetic object. Examples of possible sources of magnetic interference include: magnetic latches on a TV stand, etc., healthcare devices, toys, etc.

Specifying the speaker parameters

To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Use the test tone to adjust the speaker volumes to the same level. Select SPEAKER SETUP in the setup display. For details, see Settings for the Speakers (page 68).

45

90

20

A A

B

CC

Sub woofer

G ettin

g S

tarted

HT-C800DP 4-247-292-11(1)

27GB

Presetting Radio Stations

You can preset 20 stations for FM and 10 stations for AM. Before tuning, make sure to turn down the volume to minimum.

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

FM AM

AUTO ST

MHz

FM

ST

MHz

FM

ST

MHz

TUNING +/

BAND

[/1

continued

ENTER C/X/x/c

MEMORY

1 Press BAND repeatedly to select FM or AM band.

2 Hold down TUNING +/ until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. ST (for stereo program) appears on the front panel display.

3 Press MEMORY. A preset number appears on the front panel display.

4 Press PRESET +/ to select the preset number you want.

PRESET +/

HT-C800DP 4-247-292-11(1)

28GB

5 Press ENTER. The station is stored.

6 Repeat 1 to 5 to store other stations.

To tune in a station with a weak signal Press TUNING +/ repeatedly in 2 to tune in the station manually.

To change the preset number Start over from 1.

To change the AM tuning interval (Except for European and Mexican models) The AM tuning interval is factory set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system by pressing [/1 on the remote or on the system. While holding down x on the system, turn on the power by pressing [/1 on the remote or on the system. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure.

FM

ST

MHz

v

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

29GB

Playing Discs

continued

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

?/1

PHONES

DISC SELECT

MULTI CHANNEL DECODING

1 2 3 4 5 SUB WOOFER

LEVEL

FUNCTIONPRESET +

+MASTER VOLUME

SOUND FIELD

EX-CHANGE DISC SKIP OPEN/CLOSE

+

[/1 A OPEN/ CLOSE

H x

Adjust the volume Connect headphones

xH

[/1

DISC SELECT 1-5 DISC SKIP

EX-CHANGE

4 Press A OPEN/CLOSE on the system, and place a disc on the disc tray. Press A OPEN/CLOSE again to close the disc tray.

5 To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The system plays the disc in front of you first.

6 Press H. The disc tray closes, and the system starts playback (continuous play). To playback other discs, press DISC SKIP or DISC SELECT 1-5. Adjust the volume on the system.

After following Step 6 Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 31), VIDEO CD (page 32).

To turn on the system Press [/1 on the remote or on the system.

With the playback side facing down

Disc number

FUNCTION

FUNCTION

1 Turn on your TV.

2 Switch the input selector on the TV to this system.

3 Press [/1 on the system. The system turns on. Press FUNCTION to select DVD.

HT-C800DP 4-247-292-11(1)

30GB

To turn off the system Press ?/1 on the remote or on the system. The system enters standby mode. In standby mode, you can reduce the power consumption to minimum (Power Saving mode) and save energy in standby mode. To turn off the system completely, unplug the AC power cord from mains. While playing a disc, do not turn off the system by pressing ?/1. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press ?/1.

zOn Auto-Function If a disc is already inserted to any disc tray, you can play it back simply by pressing the H or its corresponding DISC SELECT 1-5, even if the previous music source was not a DVD. The function changes to DVD and playback starts (Auto- Function). However, if Program Play is on, you can only start playback by pressing the H.

zOn the DISC indicators The DISC indicators change as follows: green: the disc tray is chosen, or the disc is being

played back. off: there is no disc. amber: a disc is placed on the disc tray, however,

the disc tray is not chosen. Before the disc existence is checked, the indicators are in amber.

zOn Auto Power Off In DVD function, you can set the system to turn off automatically if the disc is not played back for 30 minutes. To activate the Auto Power Off function, press x and DISC SELECT 5 on the system simultaneously until AUTO.OFF Y appears on the front panel. To deactivate the function, do the same procedure above until AUTO.OFF N appears on the front panel. Even though Auto Power Off function is deactivated, the system turns off automatically when you playback a DVD and the system is in pause mode or is displaying the DVDs menu for about one hour.

Additional operations

f

F

G g

H X

m M. >

7 8 9

10/0>10

x

O

./>

H

X

x

MUTING

VOLUME +

To Operation Stop Press x.

Pause* Press X.

Resume play after Press X or H. pause

Go to the next chapter, Press >. track, scene or file in continuous play mode

Go back to the Press .. preceding chapter, track, scene or file in continuous play mode

Mute the sound Press MUTING. To cancel muting, press it again, turn the power on or turn the MASTER VOLUME clockwise to turn the volume up.

Change a disc while Press EX-CHANGE on playing another disc the system.

Play the desired disc Press DISC SELECT 1- directly 5 on the system.

* You cannot pause during JPEG playback.

Notes Do not push the disc tray when closing it. Press A

OPEN/CLOSE on the system to close the disc tray. If there is no disc in any disc tray, NO DISC

appears on the front display.

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

31GB

Resuming Playback from the Point Where You Stopped the Disc (Resume Play)

When you stop the disc, the system remembers the point where you pressed x and RESUME appears on the front panel display. As long as you do not remove the disc, Resume Play will work even if the system enters standby mode by pressing ?/1.

1 While playing a disc, press x to stop playback. RESUME appears on the front panel display, so you can restart the disc from the point where you stopped the disc. If RESUME does not appear, Resume Play is not available.

2 Press H. The system starts playback from the point where you stopped the disc in Step 1.

z To play from the beginning of the disc, press x twice, then press H.

Notes Depending on where you stopped the disc, the

system may not resume playback from exactly the same point.

The point where you stopped playing is cleared when: you change the play mode. you change the setting on the Setup Menu.

f

F

G g

H X

m M. >

x

O

H x

Using the DVDs Menu

A DVD is divided into long sections of a picture or a music feature called titles. When you play a DVD which contains several titles, you can select the title you want using DVD TOP MENU/ALBUM . When you play DVDs that allow you to select items such as the language for the subtitles and the language for the sound, select these items using DVD MENU/ALBUM +.

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

DVD MENU/ ALBUM +

ENTER C/X/x/c

DVD TOP MENU/ ALBUM

Number buttons

1 Press DVD TOP MENU/ALBUM or DVD MENU/ALBUM +. The discs menu appears on the TV screen. The contents of the menu vary from disc to disc.

2 Press C/X/x/c or the number buttons to select the item you want to play or change.

3 Press ENTER.

Note The system turns off automatically when you playback a DVD and the system is displaying the DVDs menu for about one hour.

HT-C800DP 4-247-292-11(1)

32GB

Playing VIDEO CDs with PBC Functions (PBC Playback)

With PBC (Playback Control) functions, you can enjoy simple interactive operations, search functions, and other such operations. PBC playback allows you to play VIDEO CDs interactively by following the menu on the TV screen.

./>

H x

ENTER X/x

Number buttons

O RETURN

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

To go back to the menu Press O RETURN.

z To play without using PBC, press ./> or the number buttons while the system is stopped to select a track, then press H or ENTER. Play without PBC appears on the TV screen and the system starts continuous play. You cannot play still pictures such as a menu. To return to PBC playback, press x twice, then press H.

Notes Depending on the VIDEO CD, the menu does not

appear in Step 1. Depending on the VIDEO CD, Press ENTER in

Step 3 may appear as Press SELECT in the instructions supplied with the disc. In this case, press H.

1 Start playing a VIDEO CD with PBC functions. The menu for your selection appears.

2 Select the item number you want by pressing X/x or the number buttons.

3 Press ENTER.

4 Follow the instructions in the menu for interactive operations. Refer to the instructions supplied with the disc, as the operating procedure may differ according to the VIDEO CD.

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

33GB

Playing an MP3 Audio Track

You can play MP3 audio tracks on CD- ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the system to recognize the tracks. You can also play discs recorded in Multi Session. See the instructions of the CD-R/RW device or recording software (not supplied) for details on the recording format.

1 Load a data disc recorded in MP3 into the system.

2 Press H. The system starts to play the first MP3 audio track in the first album on the disc.

Notes The system can play MP3 (MPEG1 Audio Layer3)

audio. The system cannot play audio tracks in MP3PRO format.

This system can play Multi Session CDs when an MP3 audio track is located in the first session. Any subsequent MP3 audio tracks, recorded in the later sessions, can also be played back.

Maximum number of albums on a disc: 99 (The maximum number of MP3 audio tracks that can be contained on an album is 250).

An album that does not include an MP3 audio track is skipped.

If you put the extension .MP3 to data not in MP3 format, the system cannot recognize the data properly and will generate a loud noise which could damage your speaker system.

When the system cannot play MP3, remove the disc and select CUSTOM SETUP from the setup items. Then select DATA CD PRIORITY and set to MP3 (page 68) and insert the disc again.

The system can play to a depth of 8 directories, including a ROOT directory.

continued

1 Press DVD DISPLAY. The Control Menu and disc name of MP3 data disc appear.

2 Press X/x to select (ALBUM), then press ENTER or c. The list of albums contained in the disc appears.

3 Select an album you want to play using X/x and press ENTER.

DVD DISPLAY

ENTER X/x/C/c

O RETURN

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

DVD TOP MENU/ ALBUM DVD MENU/

ALBUM +

MP3 ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

2:HOME TOWN

Selecting an album and track

HT-C800DP 4-247-292-11(1)

34GB

4 Select (TRACK) using X/x and press ENTER. The list of tracks contained in the current album appears.

When the list of all tracks or albums cannot be displayed on the window, the jump bar appears. Press c to select the jump bar icon, and then scroll the jump bar to display the rest of the list using X/x. Press C or O RETURN to return to the track or the album list.

5 Select a track using X/x and press ENTER. The selected track starts playing.

To return to the previous display Press O RETURN or C.

To turn off the display Press DVD DISPLAY.

zWhen an MP3 data disc is inserted, you can select an album using DVD TOP MENU/ALBUM or DVD MENU/ALBUM + on the remote.

Notes Only the letters in the alphabet and numbers can be

used for album or track names. Anything else is displayed as .

If the MP3 file you play back has an ID3 tag, the ID3 tag information is displayed as a track name.

ID3 tag applies only to version 1.

2:HOME TOWN ROCK BEST HIT

MP3

9.

2. 3. 4. 5. 6.

8.

10.

7.

HIGHWAY1.

TAKE IT EASY

VIEW POINT MY CHILDREN DANCING GOOD TASTE DESTINATION

PLACE-KICK

PORT TOWER 11.STANDARD

MARATHON

Playing JPEG Image File

You can play JPEG image files on CD- ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, level 2 or Joliet format for the system to recognize the files. You can also play discs recorded in Multi Session. See the instructions of the CD-R/RW device or recording software (not supplied) for details on the recording format.

1 Load a data disc recorded in JPEG into the system.

2 Press H. The system starts to play the first JPEG image file in the first album on the disc.

Notes The system can play the extension .JPG or

.JPEG. Some CD-Rs or CD-RWs cannot be played on this

system depending on file format. The system can play to a depth of 8 directories,

including a ROOT directory.

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

35GB

1 Press DVD DISPLAY. The Control Menu and disc name of JPEG data disc appears.

2 Press X/x to select (ALBUM), then press ENTER or c. The list of albums contained in the disc appears.

3 Select an album you want to play using X/x and press ENTER.

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

ODVD DISPLAY

ENTER X/x/C/c

O RETURN

DVD TOP MENU/ ALBUM DVD MENU/

ALBUM +

4 Select (FILE) using X/x and press ENTER. The list of tracks contained in the album appears.

When the list of all files or albums cannot be displayed on the window, the jump bar appears. Press c to select the jump bar icon, and then scroll the jump bar to display the rest of the list using X/x. Press C or O RETURN to return to the file or album list.

5 Select a file using X/x and press ENTER. The selected file starts playing.

To return to the previous display Press O RETURN or C.

To turn off the display Press DVD DISPLAY.

zWhen a JPEG data disc is inserted, you can select an album using DVD TOP MENU/ALBUM or DVD MENU/ALBUM + on the remote.

Notes Only the letters in the alphabet and numbers can be

used for album or file names. Anything else is displayed as .

Maximum number of albums on a disc: 99 (The maximum number of JPEG image files that can be contained on an album is 250).

2:MOUNTAIN FAMILY

JPEG

9.

2. 3. 4. 5. 6.

8.

10.

7.

HAPPY1.

TRAVEL

BIRTHDAY CELEBRATION CHRISTMAS MOM BASEBALL

DAD

FRIEND 11.DRIVE

PARTY

JPEG FAMILY FLOWER GARDEN TRAIN CAR

2:MOUNTAIN

Selecting an album and file

HT-C800DP 4-247-292-11(1)

36GB

Program

2 3 4 5 6 7 8 9

10

1

Creating Your Own Program (Program Play)

You can play the contents of a disc in the order you want by arranging the order of the tracks on the disc to create your own program. You can program up to 25 tracks.

1 In stop mode, press PLAY MODE repeatedly until PROGRAM appears on the front panel display. The program menu appears on the TV screen.

H

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER X/x/C/c

DVD DISPLAY

PLAY MODE

Number buttons

CLEAR

O

RETURN

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

C/c

Rotate the current image using C/c. Each time you press c, the image turns clockwise by 90. Each time you press C, the image turns counterclockwise by 90.

Note You cannot rotate the image during Slide show. Press H to return to normal play before this operation.

To rotate the current image

H REPEAT

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

37GB

2 Press c, then press X/x to select the disc.

3 Press c. The cursor moves to the track (in this case, DISC1(CD)). Before programming the MP3 tracks, it is required to select the album.

When the list of all tracks or albums cannot be displayed on the window, the jump bar appears. Press c to select the jump bar icon, and then scroll the jump bar to display the rest of the list using X/x. Press C or O RETURN to return to the track or the album list.

4 Select the track you want to program. For example, select track 7.

Program

DISC2(CD)

Disc

DISC3(CD) DISC4(CD) DISC5(CD)

DISC1(CD)2 3 4 5 6 7 8 9

10

1

Program

DISC2(CD)

Disc

DISC3(CD) DISC4(CD) DISC5(CD)

DISC1(CD)2 3 4 5 6 7 8 9

10

1

1 TRACK1 Track

2 TRACK2 3 TRACK3 4 TRACK4 5 TRACK5 6 TRACK6

8 TRACK8 9 TRACK9

10 TRACK10

7 TRACK7

Program

DISC2(CD)

Disc

DISC3(CD) DISC4(CD) DISC5(CD)

DISC1(CD)2 3 4 5 6 7 8 9

10

1

2 TRACK2

Track

3 TRACK3 4 TRACK4 5 TRACK5 6 TRACK6 7 TRACK7 8 TRACK8 9 TRACK9

10 TRACK10

1 TRACK1

5 Press X/x or the number buttons to select 7, then press ENTER.

6 To program other tracks, repeat Steps 2 to 5. The programmed tracks are displayed in the selected order.

7 Press H to start Program Play. Program Play begins. When the program ends, you can restart the same program again by pressing H.

To cancel Program Play Press CLEAR during playback.

To turn off the program menu In stop mode, press PLAY MODE to turn off the program menu.

To cancel the programmed order Press CLEAR in step 6, and the last program is canceled one by one.

z You can do Repeat Play of the programmed tracks. Press REPEAT or set REPEAT to ALL in the Control Menu display during Program Play.

Notes The number and name of tracks displayed on the

TV screen are the recorded data on a disc. This Program Play function is not available for

DVDs and JPEG.

Program

3 4 5 6 7 8 9

10

2 1 DISC1(CD)TRACK7

HT-C800DP 4-247-292-11(1)

38GB

Playing in random order (Shuffle Play)

You can have the system shuffle tracks and play them in random order. Subsequent shuffling may produce a different playing order. You can also select the all discs shuffle, one disc shuffle, or album shuffle (MP3 only).

1 Press DVD DISPLAY. The Control Menu appears.

2 Press X/x to select (PLAY MODE), then press ENTER or c.

ENTER C/X/x/c

DVD DISPLAY

H

PLAY MODE

CLEAR

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

2:HOME TOWN ROCK BEST HIT

( 1 5 )

MP3

CONTINUE (ALL) CONTINUE (ONE)

SHUFFLE (ALL) SHUFFLE (ONE)

CONTINUE (ALBUM)

SHUFFLE (ALBUM) PROGRAM

3 Select SHUFFLE (ALL), SHUFFLE (ONE), or SHUFFLE (ALBUM) using X/x and press ENTER.

4 Press H. The selected Shuffle Play begins.

To cancel Shuffle Play Press CLEAR during playback.

To turn off the display Press DVD DISPLAY.

To select the Shuffle Play mode directly Press PLAY MODE repeatedly to select SHUFFLE (ALL), SHUFFLE (ONE) or SHUFFLE (ALBUM).

HT-C800DP 4-247-292-11(1)

P layin

g D

iscs

39GB

H

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

ODVD DISPLAY

ENTER C/X/x/c

REPEAT

CLEAR

1 Press DVD DISPLAY. The Control Menu appears.

2 Press X/x to select (REPEAT), then press ENTER. If you do not select OFF, the indicator of the REPEAT lights in green.

3 Select the Repeat Play setting, then press ENTER.

When playing a DVD OFF: does not play repeatedly. ALL: repeats all the titles (except

SHUFFLE (ALL)). TITLE: repeats the current title on a disc. CHAPTER: repeats the current chapter

(except SHUFFLE (ALL)).

When playing a VIDEO CD/CD/MP3 and when Program Play is set to OFF OFF: does not play repeatedly. ALL: repeats all the tracks on the disc, or

repeats the current album (MP3 only) (except SHUFFLE (ALL)).

TRACK: repeats the current track.

When playing a JPEG OFF: does not play repeatedly. ALL: repeats all the files on the disc, or

repeats the current album.

When Program Play is set to ON OFF: does not play repeatedly. ALL: repeats Program Play.

To cancel Repeat Play Press CLEAR.

To turn off the display Press DVD DISPLAY.

To select the Repeat Play mode directly Press REPEAT.

z You can set Repeat Play during stop mode After selecting the REPEAT item, press H. The system starts Repeat Play.

Notes You can perform Repeat Play for DVD titles that

contain chapters. Depending on the DVD disc, Repeat Play does not

work. If ALL is selected, Repeat Play is limited to 5

times.

Playing repeatedly (Repeat

Play)

You can play all the titles/tracks/files or a single title/chapter/track on a disc. In Shuffle or Program Play mode, the system repeats tracks in the shuffled or programmed order. You cannot perform Repeat Play during PBC playback of VIDEO CDs (page 32).

DVD 1:DVD

1 2 ( 2 7 ) MAKING SCENE 1 8 ( 3 4 )

T 1 : 3 2 : 5 5

ALL TITLE CHAPTER

OFF

HT-C800DP 4-247-292-11(1)

40GB

Searching for a Particular Point on a Disc (Scan, Slow-

motion Play)

You can locate a particular point on a disc quickly by monitoring the picture or playing back slowly.

Notes Depending on the DVD/VIDEO CD, you may not

be able to do some of the operations described. During scan or slow-motion play, no sound is

output.

Locating a point quickly by playing a disc in fast forward or fast reverse (Scan) (except for JPEG)

Press m or M while playing a disc. When you find the point you want, press H to return to normal speed.

f

F

G g

H X

m M. >

7 8 9

10/0>10

x

O

Searching for a Scene

H

m/M, SLOW

/

t t

t t

To change the scan speed (DVD/ VIDEO CD only) Each time you press m or M during scan, the playback speed changes. Two speeds are available. With each press, the indication changes as follows:

Playback direction FF1M t FF2M

Opposite direction FR1m t FR2m

The FF2M/FR2m playback speed is faster than FF1M/FR1m.

Watching frame by frame (Slow- motion play)

Press or when the system is in the pause mode. To return to normal speed, press H.

To change the scan speed (DVD/ VIDEO CD only) Each time you press or during Slow- motion play, the playback speed changes. Two speeds are available. With each press, the indication changes as follows:

Playback direction SLOW 2 t SLOW 1

Opposite direction (DVD only) SLOW 2 t SLOW 1

The SLOW 2 /SLOW 2 playback speed is slower than SLOW 1 /SLOW 1 .

S earch

in g

fo r a S

cen e

HT-C800DP 4-247-292-11(1)

41GB

Enjoying the Slide show on JPEG data disc

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

M

H

1 Press M while displaying a JPEG image. Slide down starts from the current image.

2 Press H when you want to exit Slide show. Return to normal play from the current image.

t

To change the interval time of Slide show Each time you press M during Slide show, the interval time changes. With each press, the indication changes as follows:

FF1M t FF2M t FF3M

The FF3M interval time is faster than FF2M.

Note Slide show can play in only one direction.

HT-C800DP 4-247-292-11(1)

42GB

xWhen playing a DVD (TITLE)

xWhen playing a VIDEO CD (TRACK)

xWhen playing a CD (TRACK)

xWhen playing an MP3 (ALBUM) or

(TRACK)

xWhen displaying a JPEG file (ALBUM) or

(FILE)

Example: when you select (TRACK) The list of tracks contained in the disc appears.

When the list of all tracks or albums cannot be displayed on the window, the jump bar appears. Press c to select the jump bar icon, and then scroll the jump bar to display the rest of the list using X/x. Press C or O RETURN to return to the track or the album list.

3 Press X/x to select the desired track, then press ENTER. The system starts playback from the selected track.

Searching for a Title/ Chapter/Track/Index/ Album/File

You can search a title (DVD), chapter (DVD), track (CD, VIDEO CD, MP3), index (VIDEO CD), album (MP3, JPEG) and file (JPEG). As titles, tracks, albums and files are assigned unique names on the disc, you can select the desired one from the Control Menu. Also chapters and indexes are assigned unique numbers on the disc, so you select the desired one by entering its number. Or you can search a particular point using the time code (TIME SEARCH).

CD

9.

2. 3. 4. 5. 6.

8.

10.

7.

HIGHWAY1.

TAKE IT EASY

VIEW POINT MY CHILDREN DANCING GOOD TASTE DESTINATION

PLACE-KICK

PORT TOWER 11.STANDARD 12.LADY

MARATHON

CD

20.

13. 14. 15. 16. 17.

19.

21.

18.

NO NAME

STAY BAD BEAUTIFUL HOLD ME FIRST TIME

OUR EARTH

SWEETEST 22.KISS ME 23.FIRE 24.ANGEL

BLUE SKY

DVD DISPLAY

Number buttons

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER C/X/x/c

CLEAR

Searching for a title/track/album/ file

1 Press DVD DISPLAY. The Control Menu appears.

2 Press X/x to select the search method, then press ENTER.

O

RETURN

S earch

in g

fo r a S

cen e

HT-C800DP 4-247-292-11(1)

43GB

Searching for a chapter/index

1 Press DVD DISPLAY. The Control Menu appears.

2 Press X/x to select the search method.

xWhen playing a DVD (CHAPTER)

xWhen playing a VIDEO CD (INDEX)

Example: when you select (CHAPTER) ** (**) is selected (** refers to a number). The number in parentheses indicates the total number of titles, chapters, tracks, or indexes.

3 Press ENTER. ** (**) changes to -- (**).

DVD 1:DVD

1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD 1:DVD

1 2 ( 2 7 ) MAKING SCENE

T 1 : 3 2 : 5 5 ( 3 4 )

4 Press X/x or the number buttons to select the chapter or index number you want to search. If you make a mistake, cancel the number by pressing CLEAR. Then, select another number.

5 Press ENTER. The system starts playback from the selected number.

To turn off the Control Menu Press DVD DISPLAY.

To search for a particular point using the time code (TIME SEARCH)

Example: If you search for the playing time of the current title on a DVD.

1 In Step 2, select (TIME). T **:**:** (playing time of the current title or track) is selected.

2 Press ENTER. T --:--:-- appears above T **:**:**.

3 Input the time code using the number buttons, then press ENTER. Example: To find the desired point at 2 hours, 10 minutes, and 20 seconds after the beginning just enter 2:10:20.

zYou can change the display to show playing time or remaining time. For details, see Checking the Playing Time and Remaining Time (page 46).

Notes The title, chapter or track number displayed on the

TV screen is the recorded data on the disc. You cannot search a scene of a VIDEO CD. If you play a DVD, input the playing time of the

current title using the time code. If you play a CD, VIDEO CD or MP3, input the playing time of the current track using the time code.

HT-C800DP 4-247-292-11(1)

44GB

TITLE H M S

TITLE H M S

CHAPTER H M S

CHAPTER H M S

Viewing Information About the Disc

When playing a DVD

Playing time and number of the current title

Remaining time of the current title

Playing time and number of the current chapter

Remaining time of the current chapter

Title namea)

Playing time and current track number

Remaining time of the current track

Playing time of the disc

Remaining time of the disc

Track namea)

Viewing the Playing Time and Remaining Time on the Front Panel Display

You can check information about the disc, such as the remaining time, total number of titles of a DVD, or tracks of a CD, VIDEO CD, or MP3 using the front panel display (page 12).

When playing a VIDEO CD (without PBC functions), or CD

TIME

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

TRACK M S

M S

M S

TRACK M S

Press TIME. Each time you press TIME while playing the disc, the display changes as shown in the following charts.

V iew

in g

In fo

rm atio

n A

b o

u t th

e D isc

HT-C800DP 4-247-292-11(1)

45GB

When playing an MP3

TRACK M S

TRACK M S

Playing time and current track number

Album (folder) namea)

Remaining time of the current track

Track (file) namea)

zWhen playing VIDEO CDs with PBC functions, only the playing time of the scene is displayed.

z The playing time and remaining time of the current chapter, title, track, scene, or disc will also appear on your TV screen. See the following section Checking the Playing Time and Remaining Time for instructions on how to read this information.

Notes Depending on the type of disc being played and the

playing mode, the disc information may not be displayed.

ID3 tag applies only to version 1. If the MP3 file you play back has an ID3 tag, the

ID3 tag information is displayed as a track (file) name.

Only the letters in the alphabet and numbers can be used for album or file names. Anything else is displayed as .

In the following cases, elapsed playing time and time of the track remaining may not be displayed accurately. when an MP3 file of VBR (variable bit rate) is

played. during fast-forward/reverse.

When playing a JPEG

Current file number

File name

Album (folder) namea)

a) NO TEXT appears if name information does not exist. Returns to the first information when the text scrolling is finished.

HT-C800DP 4-247-292-11(1)

46GB

Checking the Playing Time and Remaining Time

You can check the playing time and remaining time of the current title, chapter, or track, and the total playing time or remaining time of the disc. You can also check the DVD/CD text and MP3 folder name/file name/ID3 tag (only song title) recorded on the disc.

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD

Time information

Disc type

DVD DISPLAY

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

TIME

2 Press TIME repeatedly to change the time information. The display and the kinds of time that you can change depend on the disc you are playing.

xWhen playing a DVD T **:**:**

Playing time of the current title T**:**:**

Remaining time of the current title C **:**:**

Playing time of the current chapter C**:**:**

Remaining time of the current chapter

**:**:** Playing time of the menu or current title without a chapter

xWhen playing a VIDEO CD (with PBC functions)

**:** Playing time of the current scene

xWhen playing a VIDEO CD (without PBC functions), or CD

T **:** Playing time of the current track

T**:** Remaining time of the current track

D **:** Playing time of the current disc

D**:** Remaining time of the current disc

xWhen playing an MP3 T **:**

Playing time of the current track T**:**

Remaining time of the current track

1 Press DVD DISPLAY during playback. The Control Menu appears.

V iew

in g

In fo

rm atio

n A

b o

u t th

e D isc

HT-C800DP 4-247-292-11(1)

47GB

To turn off the Control Menu Press DVD DISPLAY.

Notes Only letters of the alphabet can be displayed. Depending on the type of disc being played, the

system can only display a limited number of characters. Also, depending on the disc, not all text characters will be displayed.

Checking the date information

You can check the date information during playback when the Exif* tag is recorded in the JPEG image data.

DVD DISPLAY

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

Press DVD DISPLAY during playback. The Control Menu appears.

* Exchangeable Image File Format is a digital camera image format defined by the Japan Electronics & Information technology Industries Association.

zYou can change the date information order in JPEG DATE of CUSTOM SETUP (page 68).

Note If there is no date information or data is damaged on the disc, the system cannot display the date information.

2:MOUNTAIN FAMILY

1 ( 2 0 ) BIRTHDAY

1 / 1 / 2003

JPEG

Date information

HT-C800DP 4-247-292-11(1)

48GB

Changing the Sound

If a DVD is recorded with multilingual tracks, you can select the language you want while playing the DVD. If the DVD is recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS), you can select the audio format you want while playing the DVD. With stereo CDs, VIDEO CDs or MP3, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. (In this case, the sound loses its stereo effect.) For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can select the left channel and hear only the instruments from both speakers.

Sound Adjustments

2 Press X/x to select

(AUDIO), then press ENTER. The options for AUDIO appear.

3 Press X/x to select the desired audio signal.

xWhen playing a DVD Depending on the DVD, the choice of language varies. When 4 digits are displayed, they represent the language code. Refer to the language code list on page 81 to see which language the code represents. When the same language is displayed two or more times, the DVD is recorded in multiple audio formats.

xWhen playing a VIDEO CD, CD or MP3 The default setting is underlined.

STEREO: The standard stereo sound 1/L: The sound of the left channel

(monaural) 2/R: The sound of the right

channel (monaural)

4 Press ENTER.

To turn off the Control Menu Press DVD DISPLAY.

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD

2: FRENCH 3: SPANISH

1: ENGLISH

DVD DISPLAY

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER C/X/x/c

AUDIO

1 Press DVD DISPLAY during playback. The Control Menu is displayed.

S o

u n

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

49GB

The display examples are as follows: PCM (stereo)

Dolby Surround

Dolby Digital 5.1ch

DTS

Notes When the signal contains surround signal

components such as LS, RS, or S, the surround effect is enhanced.

If you play MPEG AUDIO sound tracks, the system outputs PCM (stereo) signals.

The MULTI CHANNEL DECODING indicator lights up when the system is decoding signals recorded in multi channel format.

To select the audio mode directly Press AUDIO. Each time you press the button, the item changes.

Notes For discs not in multiple audio format, you cannot

change the sound. During DVD playback, the sound may change

automatically.

Displaying the audio information of the disc

When you select AUDIO, the channels being played are displayed on the screen. For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD. Depending on the DVD, the number of recorded channels may differ.

* PCM, MPEG, DTS, or DOLBY DIGITAL is displayed. For DOLBY DIGITAL, the channels in the playing track are displayed numerically as follows:

For Dolby Digital 5.1 ch:

Current audio format*

Surround component 2

LFE (Low Frequency Effect) component 1

Front component 2 + Center component 1

DOLBY DIGITAL 3 / 2 . 1

PCM 48kHz 24bit PROGRAM FORMAT

DOLBY SURROUND DOLBY DIGITAL 2/0 PROGRAM FORMAT

DOLBY DIGITAL 3/2.1 PROGRAM FORMAT

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DOLBY DIGITAL 3/2.1 PROGRAM FORMAT

DVD

1: ENGLISH

DTS 3/2.1 PROGRAM FORMAT

HT-C800DP 4-247-292-11(1)

50GB

Automatic decoding of the audio input signal (AUTO FORMAT DIRECT AUTO)

The Auto Format Direct Auto function automatically detects the type of audio signal being input (Dolby Digital, DTS, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects (e.g. reverberation). However, if there are no low frequency signals (Dolby Digital LFE, etc.), it will generate a low frequency signal for output to the sub woofer.

Enjoying Surround Sound

You can take advantage of surround sound simply by selecting one of the systems pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. To select the sound field, press SOUND FIELD +/ repeatedly until the sound field you want appears on the front panel display.

Sound field Display AUTO FORMAT DIRECT PRO LOGIC PRO LOGIC

AUTO FORMAT DIRECT PLII MOV PRO LOGIC II MOVIE

AUTO FORMAT DIRECT PLII MUS PRO LOGIC II MUSIC

ROCK ROCK

POP POP

JAZZ JAZZ

CLASSIC CLASSIC

DANCE DANCE

NEWS NEWS

SPORTS SPORTS

MOVIE MOVIE

When using the headphones

Sound field Display HEADPHONE 2 CHANNEL HP. 2CH STEREO

HEADPHONE SURROUND HP. SURR

SOUND FIELD +/

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

Press SOUND FIELD +/ on the remote repeatedly until A.F.D. AUTO appears on the front panel display. The Auto Format Direct Auto function is activated.

S o

u n

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

51GB

Selecting other sound fields

Press SOUND FIELD +/ repeatedly until the sound field you want appears on the front panel display. The current sound field appears on the front panel display.

xAUTO FORMAT DIRECT PRO LOGIC This mode performs the Pro Logic decoding. Software with multi channel surround audio signals is played back according to the way it was recorded. Software with 2 channel audio signals is decoded with Dolby Pro Logic to create surround effects.

xAUTO FORMAT DIRECT PRO LOGIC MOVIE

This mode performs the Pro Logic II movie mode decoding. This setting is ideal for the movies encoded in Dolby Surround. Besides, this mode can reproduce the sound in 5.1 channel when watching the videos of old movies or in the dubbed language.

xAUTO FORMAT DIRECT PRO LOGIC MUSIC

This mode performs the Pro Logic II music mode decoding. This setting is ideal for the normal stereo sources, such as CDs.

xROCK, POP, JAZZ, CLASSIC, DANCE

Each mode provides sound to suit music sources.

xNEWS, SPORTS, MOVIE Each mode provides sound to suit the source.

xHEADPHONE 2 CHANNEL STEREO This mode outputs the sound from the headphone L/R. Standard two channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to two channels.

xHEADPHONE SURROUND This mode outputs the sound as surround from headphone L/R.

To turn the surround effect off Press SOUND FIELD +/ until A.F.D. AUTO or 2CH ST. appears on the front panel display.

When connecting the headphones to the PHONES jack Press SOUND FIELD +/ on the remote until HP. 2CH appears in the front panel display.

z The system memorizes the last sound field selected for each function mode (Sound Field Link) Whenever you select a function such as DVD or TUNER, the sound field that was last applied to the function is automatically applied again. For example, if you listen to DVD with JAZZ as the sound field, then change to another function, and then return to DVD, JAZZ will be applied again. With the tuner, sound fields are memorized separately for all preset stations.

z You can identify the encoding format of program software by looking at its packaging Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled

with the logo. DTS Digital Surround discs are marked with DTS.

Note When you play sound tracks with 96 kHz sampling frequency, the output signals will be converted to 48 kHz (sampling frequency).

HT-C800DP 4-247-292-11(1)

52GB

Using only the front speakers and sub woofer (2 CHANNEL STEREO)

SOUND FIELD +/

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

Press SOUND FIELD +/ on the remote repeatedly until 2CH ST. appears on the front panel display. This mode outputs the sound from the front left and right speakers and sub woofer. Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel.

E n

joyin g

M o

vies

HT-C800DP 4-247-292-11(1)

53GB

Enjoying Movies

Changing the Angles

If various angles (multi-angles) for a scene are recorded on the DVD, ANGLE appears in the front panel display. This means that you can change the viewing angle. For example, while playing a scene of a train in motion, you can display the view from either the front of the train, the left window of the train, or from the right window without having the trains movement interrupted.

2 Press X/x to select (ANGLE). The angle number appears. The number in parentheses indicates the total number of angles. The ANGLE indicator lights up in green when angles are recorded on the disc.

3 Press c or ENTER. The angle number changes to -.

4 Select the angle number using X/x or the number buttons, then press ENTER. The angle is changed to the selected angle.

To turn off the Control Menu Press DVD DISPLAY.

To select the angle directly Press ANGLE. Each time you press the button, the angle changes.

Note Depending on the DVD, you may not be able to change the angles, even if multi-angles are recorded on the DVD.

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD

1 ( 9 )

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD

( 9 )

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER C/X/x/c

DVD DISPLAY

Number buttons

ANGLE

1 Press DVD DISPLAY during playback. The Control Menu appears.

HT-C800DP 4-247-292-11(1)

54GB

Displaying the Subtitles

If subtitles are recorded on the discs, you can turn the subtitles on and off while playing. If multilingual subtitles are recorded on the disc, you can change the subtitle language while playing, or turn the subtitles on or off whenever you want. For example, you can select the language you want to practice and turn the subtitles on for better understanding.

2 Press X/x to select (SUBTITLE), then press ENTER. The options for SUBTITLE appear.

3 Press X/x to select the language. Depending on the DVD, the choice of language varies. When 4 digits are displayed, they indicate the language code. Refer to the language code list on page 81 to see which language the code represents.

4 Press ENTER.

To cancel the SUBTITLE setting Select OFF in Step 3.

To turn off the Control Menu Press DVD DISPLAY.

To select the language directly Press SUBTITLE. Each time you press the button, the item changes.

Note Depending on the DVD, you may not be able to change the subtitles even if multilingual subtitles are recorded on it.

1: ENGLISH 2: FRENCH 3: SPANISH

DVD

OFF

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD DISPLAY

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER C/X/x/c

SUBTITLE

1 Press DVD DISPLAY during playback. The Control Menu appears.

U sin

g V

ario u

s A d

d itio

n al F

u n

ctio n

s

HT-C800DP 4-247-292-11(1)

55GB

Using Various Additional Functions

1:DVD 1 2 ( 2 7 ) MAKING SCENE

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

DVD

ON PASSWORD

DVD DISPLAY

O

RETURN

ENTER C/X/x/c

x

Number buttons

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

1 Insert the disc you want to lock. If the disc is playing, press x to stop playback.

2 In stop mode, press DVD DISPLAY. The Control Menu appears.

3 Press X/x to select (CUSTOM PARENTAL CONTROL), then press ENTER. CUSTOM PARENTAL CONTROL is selected.

Locking Discs (CUSTOM PARENTAL

CONTROL, PARENTAL CONTROL)

You can set two kinds of playback restrictions for a disc. Custom Parental Control

You can set the playback restrictions so that the system will not play inappropriate discs.

Parental Control Playback of some DVDs can be limited according to a predetermined level such as the age of the users.

The same password is used for both Parental Control and Custom Parental Control.

Custom Parental Control

You can set the same Custom Parental Control password for up to 25 discs. When you set the 26th disc, the playback restriction of the disc for which you first set the password is canceled.

continued

HT-C800DP 4-247-292-11(1)

56GB

CUSTOM PARENTAL CONTROL

Enter password, then press .ENTER

CUSTOM PARENTAL CONTROL

Enter a new 4-digit password, then press .ENTER

4 Press X/x to select ON t, then press ENTER.

xWhen you have not entered a password The display for registering a new password appears.

Enter a 4-digit password by using the number buttons, then press ENTER. The display for confirming the password appears.

xWhen you have already registered a password The display for entering the password appears.

5 Enter or re-enter your 4-digit password by using the number buttons, then press ENTER. Custom parental control is set. appears and the screen returns to the Control Menu display.

If you make a mistake entering your password Press C before you press ENTER and input the correct number.

If you make a mistake Press O RETURN, then start from Step 3 again.

To turn off the Control Menu Press DVD DISPLAY.

To turn off the Custom Parental Control function

1 In Step 4, select OFF t, then press ENTER.

2 Enter your 4-digit password using the number buttons, then press ENTER.

To change the password

1 In Step 4, press X/x to select PASSWORD t, then press ENTER. The display for entering the password appears.

2 Enter your 4-digit password using the number buttons, then press ENTER.

3 Enter a new 4-digit password using the number buttons, then press ENTER.

4 To confirm your password, re-enter it using the number buttons, then press ENTER.

U sin

g V

ario u

s A d

d itio

n al F

u n

ctio n

s

HT-C800DP 4-247-292-11(1)

57GB

CUSTOM SETUP

OFF PARENTAL CONTROL TRACK SELECTION

STANDARDAUDIO DRC: MP3DATA CD PRIORITY:

MM/DD/YYYYJPEG DATE

CUSTOM PARENTAL CONTROL

Custom parental control is already set. To play, enter your password and press .ENTER

Playing the disc for which Custom Parental Control is set

1 Insert the disc for which Custom Parental Control is set. The CUSTOM PARENTAL CONTROL display appears.

2 Enter your 4-digit password using the number buttons, then press ENTER. The system is ready for playback.

z If you forget your password, enter the 6-digit number 199703 using the number buttons when the CUSTOM PARENTAL CONTROL display asks you for your password, then press ENTER. The display will ask you to enter a new 4-digit password.

Limiting playback for children (Parental Control)

Playback of some DVDs can be limited according to a predetermined level such as the age of the users. The Parental Control function allows you to set a playback limitation level. A scene that is limited is not played, or it is replaced by a different scene.

O

RETURN

H

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

ENTER C/X/x/c

Number buttons

DVD SETUP

continued

1 In stop mode, press DVD SETUP. The Setup Display appears.

2 Press X/x to select CUSTOM SETUP, then press ENTER. CUSTOM SETUP is displayed.

HT-C800DP 4-247-292-11(1)

58GB

5 Press X/x to select STANDARD, then press ENTER. The selection items for STANDARD are displayed.

6 Press X/x to select a geographic area as the playback limitation level, then press ENTER. The area is selected. If you select OTHERS t, select and enter the standard code in the table on page 60 using the number buttons.

7 Press X/x to select LEVEL, then press ENTER. The selection items for LEVEL are displayed.

8 Select the level you want using X/x, then press ENTER. Parental Control setting is complete.

The lower the value, the more strict the limitation.

CUSTOM SETUP PARENTAL CONTROL

STANDARD: CHANGE PASSWORD

OFFLEVEL:

NC17 R

8: 7: 6: 5:

PG PG13

G

4: 3: 2: 1:

CUSTOM SETUP PARENTAL CONTROL

STANDARD: CHANGE PASSWORD

USA LEVEL: OFF

CUSTOM SETUP PARENTAL CONTROL

LEVEL: STANDARD: CHANGE PASSWORD

OFF

OTHERS USA

3 Press X/x to select PARENTAL CONTROL t, then press ENTER.

xIf you have not entered a password The display for registering a new password appears.

Enter a 4-digit password using the number buttons, then press ENTER. The display for confirming the password appears.

xWhen you have already registered a password The display for entering the password appears.

4 Enter or re-enter your password by using the number buttons, then press ENTER. The display for setting the playback limitation level and changing the password appears.

CUSTOM SETUP PARENTAL CONTROL Enter a new 4-digit password, then press .ENTER

CUSTOM SETUP PARENTAL CONTROL Enter password, then press .ENTER

CUSTOM SETUP PARENTAL CONTROL

STANDARD: CHANGE PASSWORD

USA PG134:LEVEL:

U sin

g V

ario u

s A d

d itio

n al F

u n

ctio n

s

HT-C800DP 4-247-292-11(1)

59GB

Playing the disc for which Parental Control is set

1 Insert the disc and press H. The PARENTAL CONTROL display appears.

2 Enter your 4-digit password using the number buttons, then press ENTER. The system starts playback.

z If you forget your password, remove the disc and repeat Step 1 to 3 of Limiting playback for children. When you are asked to enter your password, enter 199703 using the number buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password in Step 3, replace the disc in the system and press H. When the PARENTAL CONTROL display appears, enter your new password.

Notes When you play DVDs which do not have the

Parental Control function, playback cannot be limited on this system.

Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is cancelled, the level returns to the original level.

If you make a mistake Press O RETURN to go back to the previous screen.

To turn off the Setup Display Press DVD SETUP.

To turn off the Parental Control function and play the DVD after entering your password Set LEVEL to OFF in Step 8.

To change the password

1 In Step 5, select CHANGE PASSWORD t using x, then press ENTER. The display for entering the password appears.

2 Follow Step 3 to enter a new password.

continued

HT-C800DP 4-247-292-11(1)

60GB

Standard Code number

Argentina 2044

Australia 2047

Austria 2046

Belgium 2057

Brazil 2070

Canada 2079

Chile 2090

China 2092

Denmark 2115

Finland 2165

France 2174

Germany 2109

Hong Kong 2219

India 2248

Indonesia 2238

Italy 2254

Japan 2276

Standard Code number

Korea 2304

Malaysia 2363

Mexico 2362

Netherlands 2376

New Zealand 2390

Norway 2379

Pakistan 2427

Philippines 2424

Portugal 2436

Russia 2489

Singapore 2501

Spain 2149

Sweden 2499

Switzerland 2086

Taiwan 2543

Thailand 2528

United Kingdom 2184

Area Code

O th

er O p

eratio n

s

HT-C800DP 4-247-292-11(1)

61GB

Using the Video or other Unit

You can use VCRs or other units connected to the VIDEO or TV jacks. Refer to the operation manual supplied with the unit for further information on the operation.

FUNCTION

f

F

G g

Controlling the TV with the Supplied Remote

You can control your Sony TV with the supplied remote.

Controlling TVs with the remote

TV ?/1

TV/VIDEO

TV CH +/

TV VOL +/

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

Other Operations

Controlling the TV You can control your TV using the buttons below.

By pressing You can TV [/1 Turn the TV on or off.

TV/VIDEO Switch the TVs input source between the TV and other input sources.

TV VOL +/ Adjust the TV volume.

TV CH +/ Change the TV channel.

Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above.

Press FUNCTION repeatedly until the desired source that you connected to the system appears on the front panel display. Each time you press FUNCTION, the mode of the system changes in the following sequence. DVD t VIDEO t TV t TUNER t DVD...

Additional operations f

F

G g

BASS BOOST

DIMMER

To Operation Adjust the bass Press BASS BOOST.

Change the brightness Press DIMMER. of the display (2 steps)

HT-C800DP 4-247-292-11(1)

62GB

Listening to the Radio

Preset radio stations in the systems memory first (see Presetting Radio Stations on page 27).

VOLUME +/

PRESET +/

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

FUNCTION ?/1

To turn off the radio Press ?/1.

To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING +/ on the remote repeatedly. For automatic tuning, press and hold TUNING +/ on the remote.

z If an FM program is noisy Press ST/MONO repeatedly so that MONO appears on the front panel display. There will be no stereo effect, but the reception will improve. Press ST/MONO again to restore the stereo effect.

z To improve reception Reorient the supplied antennas.

BAND

1 Press FUNCTION repeatedly until the band you want appears on the front panel display. The last received station is tuned in.

2 Press PRESET + or repeatedly to select the preset station you want. Each time you press the button, the system tunes in one preset station.

3 Adjust the volume by pressing VOLUME +/.

ST/MONO

TUNING +/

S ettin

g s an

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

63GB

LANGUAGE SETUP OSD : DVD MENU : AUDIO : SUBTITLE :

ENGLISH ENGLISH ENGLISH ENGLISH

Using the Setup Display

By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see page 6470. For an overall list of Setup Display items, see page 82.

How to use the Setup Display

Settings and Adjustments

2 Press X/x to select the setup item from the displayed list: LANGUAGE SETUP, SCREEN SETUP, CUSTOM SETUP, SPEAKER SETUP, and RESET. Then press ENTER or c. The selected Setup item appears. Example: SCREEN SETUP

3 Select an item using X/x, then press ENTER or c. The options for the selected item appear. Example: TV TYPE

Press C or O RETURN to return to setup items.

SCREEN SETUP

SCREEN SAVER: BACKGROUND: COMPONENT OUT:

ON JACKET PICTURE

INTERLACE

16:9TV TYPE:

Main item

Options

SCREEN SETUP

SCREEN SAVER: BACKGROUND: COMPONENTOUT:

TV TYPE: 4:3 LETTER BOX

4:3 PAN SCAN

16:9

f

F

G g

H X

m M. >

1 2 3

4 5 6

7 8 9

10/0>10

x

O

DVD SETUP

ENTER C/X/x/c

continued

1 In stop mode, press DVD SETUP. The Setup Display appears.

O

RETURN

HT-C800DP 4-247-292-11(1)

64GB

Setting the Display or Sound Track Language (LANGUAGE SETUP)

LANGUAGE SETUP allows you to set various languages for the on-screen display or sound track.

Select LANGUAGE SETUP in the Setup Display. For details on using the display, see Using the Setup Display (page 63).

xOSD (On-Screen Display) Switches the display language on the screen. Selects the language from the displayed list.

xDVD MENU (DVD only) Selects the desired language for the DVD menu.

xAUDIO (DVD only) Switches the language of the sound track. Selects the language from the displayed list.

xSUBTITLE (DVD only) Switches the language of the subtitle. Selects the language from the displayed list.

4 Select a setting using X/x, then press ENTER. The setting is selected and setup is complete. Example: 4:3 PAN SCAN

To turn off the Setup Display Press DVD SETUP.

z If you select RESET in Step 2, all of the following items are reset or cleared. All of the SETUP settings on page 82 (except for

PARENTAL CONTROL). All preset stations are reset or cleared. The sound field memorized for each program

source and preset station are cleared. The master volume is set to VOL MIN. DIMMER is set to default. After you select RESET and press ENTER, select YES to reset the setting (it takes a few seconds to complete) or select NO and press ENTER to return to the Control Menu. Do not press [/1 when resetting the system.

Selected setting

SCREEN SETUP

SCREEN SAVER: BACKGROUND: COMPONENTOUT:

ON JACKET PICTURE

INTERLACE

TV TYPE: 4:3 PAN SCAN

LANGUAGE SETUP OSD : DVD MENU : AUDIO : SUBTITLE :

ENGLISH ENGLISH ENGLISH ENGLISH

S ettin

g s an

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

65GB

zIf you select OTHERS t in DVD MENU, SUBTITLE, or AUDIO, select and enter the language code from the list using the number buttons (page 81). After you have made a selection, the language code (4 digits) is displayed the next time you select OTHERS t.

Note If you select a language that is not recorded on the DVD, one of the recorded languages will be automatically selected (except for the OSD).

Settings for the Display (SCREEN SETUP)

Choose settings according to the TV to be connected.

Select SCREEN SETUP in the Setup Display. For details on using the display, see Using the Setup Display (page 63). The default settings are underlined.

xTV TYPE (DVD only) Selects the aspect ratio of the connected TV (4:3 standard or wide). The default settings vary, depending on the country model.

SCREEN SETUP

SCREEN SAVER: BACKGROUND: COMPONENT OUT:

ON JACKET PICTURE

INTERLACE

TV TYPE: 16:9

continued

16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function.

4:3 Select this when you connect a LETTER 4:3 screen TV. Displays a wide BOX picture with bands on the upper

and lower portions of the screen.

4:3 Select this when you connect a PAN SCAN 4:3 screen TV. Automatically

displays the wide picture on the entire screen and cuts off the portions that do not fit.

HT-C800DP 4-247-292-11(1)

66GB

4:3 LETTER BOX

Note Depending on the DVD, 4:3 LETTER BOX may be selected automatically instead of 4:3 PAN SCAN or vice versa.

xSCREEN SAVER Turns the screen saver on and off so that the screen saver image appears when you leave the system in pause or stop mode for 15 minutes, or when you playback a CD or MP3 for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver.

xBACKGROUND Selects the background color or picture on the TV screen in stop mode or while playing a CD.

16:9

4:3 PAN SCAN

xCOMPONENT OUT This will change the type of signal output from the COMPONENT VIDEO OUT jacks on the system. See pages 71 for more information about the different types.

Notes When PROGRESSIVE is selected in SCREEN

SETUP, no signal is output from the MONITOR jack.

For European models only PROGRESSIVE does not work for PAL signals. Even if you set COMPONENT OUT to PROGRESSIVE, the output signal is automatically switched to INTERLACE format for PAL signals.

ON Turns on the screen saver.

OFF Turns off the screen saver.

JACKET The jacket picture (still picture) PICTURE appears in the background, but

only when the jacket picture is already recorded on the disc (CD-EXTRA, etc.). If the disc does not contain a jacket picture, the GRAPHICS picture appears.

GRAPHICS A preset picture stored in the system appears in the background.

BLUE The background color is blue.

BLACK The background color is black.

INTERLACE Select this when you are connected to a standard (interlace format) TV.

PROGRESSIVE Select this when you have a TV that can accept progressive signals.

S ettin

g s an

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

67GB

Custom Settings (CUSTOM

SETUP)

Allows setting up Parental Control and other settings.

Select CUSTOM SETUP in the Setup Display. For details on using the display, see Using the Setup Display (page 63). The default settings are underlined.

xPARENTAL CONTROL t (DVD only) Sets a password and playback limitation level for DVDs with playback limitation for children. For details, see Limiting playback for children (Parental Control) (page 57).

xTRACK SELECTION (DVD only) Gives the sound track having the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded.

CUSTOM SETUP

OFF PARENTAL CONTROL TRACK SELECTION

STANDARDAUDIO DRC: MP3DATA CD PRIORITY:

MM/DD/YYYYJPEG DATE

Notes When you set the item to AUTO, the language

may change. The TRACK SELECTION setting has higher priority than the AUDIO settings in LANGUAGE SETUP (page 64).

If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order.

Depending on the DVD, the audio channel with priority may be predetermined. In this case, you cannot give priority to the DTS, Dolby Digital, or MPEG audio format by selecting AUTO.

xAUDIO DRC Narrows the DYNAMIC range of the sound track. Useful for watching movies at low volume late at night.

Note DYNAMIC range compression only works for Dolby Digital sources.

OFF No priority given.

AUTO Priority given.

OFF No compression of DYNAMIC range.

STANDARD Reproduces the sound track with the kind of DYNAMIC range that the recording engineer intended.

MAX Narrows the DYNAMIC range fully.

continued

HT-C800DP 4-247-292-11(1)

68GB

SPEAKER SETUP

DISTANCE:

TEST TONE:

SIZE:

BALANCE: LEVEL:

Settings for the Speakers (SPEAKER SETUP)

To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.

Select SPEAKER SETUP in the setup display. For details, see Using the Setup Display (page 63). The default settings are underlined.

To return to the default setting when changing a setting Select the item, then press CLEAR.

xSIZE When you do not connect center or surround speakers, or move the surround speakers, set the parameters for CENTER and SURROUND. Since the front speaker and sub woofer settings are fixed, you cannot change them. The default settings are underlined. FRONT

YES CENTER

YES: Normally select this. NONE: Select this if no center speaker

is used.

xDATA CD PRIORITY (MP3, JPEG only)

Set priority data you want to play, when you play the data disc (CD-ROM/CD-R/CD- RW) contained MP3 audio tracks and JPEG image files.

Note When you play Multi Session CDs, the system decides a target to play for last session or session linked with last session.

xJPEG DATE Change the date information order of a JPEG image in the Control Menu. The default setting is MM/DD/YYYY. YYYY: Year MM: Month DD: Day

MP3 If an MP3 file exists on the disc, the system recognises the disc as an MP3 Disc. If only JPEG files exist on the disc, the system recognises the disc as a JPEG Disc.

JPEG If a JPEG file exists on the disc, the system recognises the disc as a JPEG Disc. If only MP3 files exist on the disc, the system recognises the disc as an MP3 Disc.

S ettin

g s an

d A

d ju

stm en

ts

HT-C800DP 4-247-292-11(1)

69GB

3m (10ft.)

3m (10ft.)

3m (10ft.)

3m (10ft.)

3m (10ft.)

Notes In SPEAKER SETUP, the North American models

OSD displays both metric and imperial measurements. The other models displays metric measurements only. The manual shows both.

When you set the distance, the sound cuts off for a moment.

If each of the front or surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

Do not place the surround speakers farther away from your listening position than the front speakers.

xLEVEL You can vary the level of each speaker as follows. Be sure to set TEST TONE to ON for easy adjustment. The default settings are underlined.

CENTER Adjusts the level of the center 0 dB speaker (10 dB to +10 dB, 1

dB steps).

SURROUND-LEFT Adjusts the level of the 0 dB surround speakers (10 dB SURROUND-RIGHT to +10 dB, 1 dB steps). 0 dB

SUB WOOFER Adjusts the level of the 0 dB sub woofer (10 dB to +10

dB, 1 dB steps).

continued

FRONT Front speaker distance from the 3.0 m/ listening position can be set in 10 ft. 0.2 meter (1 ft.) steps from 1.0 to

7.0 meters (3 to 23 ft.).

CENTER Center speaker distance can be 3.0 m/ moved up to 1.6 meters (5 ft.) 10 ft. forward closer to the listening

position from the front speaker position, in 0.2 meter (1 ft.) steps.

SURROUND Surround speaker distance can be 3.0 m/ moved up to 4.6 meters (15 ft.) 10 ft. closer to your listening position

from the front speaker position, in 0.2 meter (1 ft.) steps.

SURROUND YES: Normally select this. NONE: Select this if no surround

speaker is used. SUB WOOFER

YES

Notes When you select an item, the sound cuts off for a

moment. Depending on the settings of other speakers, the

sub woofer may output excessive sound.

xDISTANCE The default distance setting for the speakers in relation to the listening position is shown below.

Be sure to change the value in the Setup Display when you move the speakers. The default settings are underlined.

zYou can directly increase the sub woofer level by pressing SUB WOOFER LEVEL on the system.

HT-C800DP 4-247-292-11(1)

70GB

Adjusting the speaker volume and level

1 After you stop playback, select SPEAKER SETUP after pressing DVD SETUP in the Setup Display.

2 Select TEST TONE and set TEST TONE to ON. You will hear the test tone from each speaker in sequence.

3 From your listening position, select BALANCE or LEVEL and adjust the value of BALANCE and LEVEL using X/x. When you select BALANCE, the test tone is emitted from both left and right speakers simultaneously.

4 Select TEST TONE and set TEST TONE to OFF to turn off the test tone.

Note When you adjust the speaker settings, the sound cuts off for a moment.

OFF The test tone is not emitted from the speakers.

ON The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select BALANCE, the test tone is emitted from both left and right speakers simultaneously.

xBALANCE You can vary the balance of the left and right speakers as follows. Be sure to set TEST TONE to ON for easy adjustment. The default settings are underlined.

To adjust the volume of all the speakers at one time Use the MASTER VOLUME control on the system or press VOLUME +/.

xTEST TONE The speakers will emit a test tone to adjust LEVEL and BALANCE. The default settings are underlined.

FRONT Adjust the balance between the CENTER front left and right speakers (You

can adjust from center 6 steps left or right).

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

71GB

Additional Information

continued

Troubleshooting

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Power

The power is not turned on. , Check that the AC power cord (mains lead) is

connected securely.

Picture

There is no picture. , The connecting cords are not connected

securely. , The connecting cords are damaged. , The system is not connected to the correct TV

input jack (page 24). , The video input on the TV is not set so that

you can view pictures from the system. , You have set COMPONENT OUT in

SCREEN SETUP to PROGRESSIVE even though your TV cannot accept the signal in progressive format. In this case, press x and PRESET on the system simultaneously until PROGRESSIVE disappears from the front panel display. The system is reset back to INTERLACE.

, Even if your TV is compatible with progressive format signals, the image may be affected when you set COMPONENT OUT to PROGRESSIVE. In this case, set COMPONENT OUT to INTERLACE.

, When PROGRESSIVE is selected in SCREEN SETUP, no signal is output from the MONITOR jack.

Picture noise appears. , The disc is dirty or flawed. , If the picture output from your system goes

through your VCR to get to your TV, the copy-protection signal applied to some DVD programs could affect picture quality.

Even though you set the aspect ratio in TV TYPE of SCREEN SETUP, the picture does not fill the screen. , The aspect ratio of the disc is fixed on your

DVD.

The picture is black and white. , Depending on the TV, the picture on the

screen becomes black and white when you play a disc recorded in the NTSC color system.

Sound

There is no sound. , The connecting cord is not connected

securely. , The connecting cord is damaged. Replace it

with a new one. , Press MUTING on the remote if MUTING

is displayed on the front panel display. , The protective device on the system has been

activated because of a short circuit. Turn off the system, eliminate the short-circuit problem and turn on the power again.

, The system is in pause mode or in Slow- motion Play mode. Press H to return to normal play mode.

, Fast forward or fast reverse is performed. Press H to return to normal play mode.

, Check the speaker settings (page 68).

HT-C800DP 4-247-292-11(1)

72GB

The left and right sounds are unbalanced or reversed. , Check that the speakers and components are

connected correctly and securely. , Adjust the balance parameter in the

BALANCE menu (page 70).

Severe hum or noise is heard. , Check that the speakers and components are

connected securely. , Check that the connecting cords are away

from a transformer or motor, and at least 3 meters (10 feet) away from a TV set or fluorescent light.

, Move your TV away from the audio components.

, The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

, Clean the disc.

The sound loses stereo effect when you play a VIDEO CD, a CD or an MP3. , Set AUDIO to STEREO in the Control

Menu display (page 48). , Make sure you connect the system

appropriately.

The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track. , Make sure the sound field function is on

(page 50). , Check the speaker connections and settings

(pages 19, 68). , Depending on the DVD, the output signal

may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound comes from the center speaker only. , Depending on the disc, the sound may come

from the center speaker only.

No sound is heard from the center speaker. , Check the speaker connections and settings. , Make sure the sound field function is on

(page 50).

No sound or only a very low-level sound is heard from the surround speakers. , Check the speaker connections and settings. , Make sure the sound field function is on

(page 50).

Operation

Radio stations cannot be tuned in. , Check that the antennas are connected

securely. Adjust the antennas and connect an external antenna if necessary.

, The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning (page 62).

, No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 27).

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

73GB continued

The remote does not function. , There are obstacles between the remote and

the system. , The distance between the remote and the

system is too far. , The remote is not pointed at the remote

sensor on the system. , The batteries in the remote are weak.

The disc does not play. , There is no disc inside. , The disc is turned over.

Insert the disc with the playback side facing down on the disc tray.

, The disc is skewed. , The system cannot play CD-ROMs, etc.

(page 8). , The region code on the DVD does not match

the system. , Moisture has condensed inside the system.

Remove the disc and leave the system turned on for about half an hour (page 4).

The MP3 audio track cannot be played. , The DATA CD is not recorded in the MP3

format that conforms to ISO9660 Level 1/ Level 2 or Joliet.

, The MP3 audio track does not have the extension .MP3.

, The data is not formatted in MP3 even though it has the extension .MP3.

, The system can play only MP3 (MPEG1 Audio Layer3) audio.

, Remove the disc and select CUSTOM SETUP from the setup items. Then select DATA CD PRIORITY and set to MP3 again.

, Directory level is more than 8.

The title of the MP3 audio album or track is not correctly displayed. , The player can only display numbers and

alphabet. Other characters are displayed as .

The JPEG image file cannot be played. , The DATA CD is not recorded in JPEG

format that conforms to ISO9660 Level/Level 2 or Joliet.

, The JPEG image file does not have the extension .JPG or JPEG.

, The data is not formatted in JPEG even though it has the extension .JPG or JPEG.

, Image of length or width is more than 4720 dots.

, Remove the disc and select CUSTOM SETUP from the setup items. Then select DATA CD PRIORITY and set to JPEG again.

, Directory level is more than 8.

The title of the JPEG album or file is not correctly displayed. , The system can only display numbers and

alphabet. Other characters are displayed as .

The disc does not start playing from the beginning. , Program Play, Shuffle Play, or Repeat Play

has been selected (pages 36, 38, 39). Press CLEAR to cancel these functions before playing a disc.

, Resume Play has been selected. During stop, press x on the system or the remote and then start playback (page 31).

, The title, DVD or PBC menu automatically appears on the TV screen.

HT-C800DP 4-247-292-11(1)

74GB

The angles cannot be changed. , Multi-angles are not recorded on the DVD

being played (page 53). , The DVD prohibits changing the angles.

The system does not operate properly. , If static electricity, etc., causes the system to

operate abnormally, press ?/1 on the system to turn the system off and then on again.

The disc tray does not open and LOCKED appears on the front panel display. , Contact your Sony dealer or local authorized

Sony service facility.

MECH LOCK appears on the front panel display. , Turn off the system and unplug the AC power

cord. Then connect the AC power cord again.

PROTECT appears on the front panel display. , The speaker protection circuit is in function.

Check the speaker connections.

, Check that the fan is working (page 14).

REMOVE appears on the front panel display. , Remove the disc that is currently visible.

The system turns off automatically. , Check the system if Auto Power Off function

has been activated (page 30). Even though

Auto Power Off function is deactivated, the

system turns off automatically when you

playback a DVD and the system is in pause

mode or is displaying the DVDs menu for

about one hour.

The system starts playing the disc automatically. , The DVD features an auto playback function.

Playback stops automatically. , Some discs may contain an auto pause signal.

While playing such a disc, the system stops playback at the auto pause signal.

You cannot perform some functions such as Stop, Search, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play. , Depending on the disc, you may not be able

to do some of the operations above. See the operating manual that comes with the disc.

Messages do not appear on the screen in the language you want. , In the Setup Display, select the desired

language for the on-screen display in OSD under LANGUAGE SETUP (page 64).

The language for the sound track cannot be changed. , Multilingual tracks are not recorded on the

DVD being played. , The DVD prohibits changing the language for

the sound track.

The subtitle language cannot be changed. , Multilingual subtitles are not recorded on the

DVD being played. , The DVD prohibits changing the subtitles.

The subtitle cannot be turned off. , The DVD prohibits turning off subtitles.

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

75GB continued

Glossary

Album Section of a music piece or an image on a data CD containing MP3 audio tracks.

Chapter

Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters.

Dolby Digital

This sound format for movie theaters is more advanced than Dolby Pro Logic Surround. In this format, the surround speakers output stereo sound with an expanded frequency range and a sub woofer channel for deep bass is independently provided. This format is also called 5.1 because the sub woofer channel is counted as 0.1 channel (since it functions only when a deep bass effect is needed). All six channels in this format are recorded separately to realize superior channel separation. Furthermore, since all the signals are processed digitally, less signal degradation occurs.

Dolby Pro Logic Surround

As one method of decoding Dolby Surround, Dolby Pro Logic Surround produces four channels from two-channel sound. Compared with the former Dolby Surround system, Dolby Pro Logic Surround reproduces left-to- right panning more naturally and localizes sounds more precisely. To take full advantage of Dolby Pro Logic Surround, you should have one pair of surround speakers and a center speaker. The surround speakers output monaural sound.

Dolby Pro Logic II

Dolby Pro Logic II creates five full- bandwidth output channels from two- channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations.

Movie mode The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound.

Music mode The Music mode is for use with any stereo music recordings, and provides a wide and deep sound space.

DTS

Digital audio compression technology that the Digital Theater Systems, Inc. developed. This technology conforms to 5.1-channel surround. The surround channel is stereo and there is discrete sub woofer channel in this format. DTS provides the same 5.1 discrete channels of high quality digital audio. The good channel separation is realized because the all channel data is recorded discrete and processed in digital.

DVD

A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD, at 4.7 GB (Giga Byte), is 7 times that of a CD. Furthermore, the data capacity of a dual-layer and single-sided DVD is 8.5 GB, a single-layer and double- sided DVD 9.4 GB, and a dual-layer and double-sided DVD 17 GB.

HT-C800DP 4-247-292-11(1)

76GB

Multilingual function

Several languages for the sound or subtitles in a picture are recorded on some DVDs.

Parental Control

A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on.

Playback Control (PBC)

Signals encoded on VIDEO CDs (Version 2.0) to control playback. By using menu screens recorded on VIDEO CDs with PBC functions, you can enjoy playing simple interactive programs, programs with search functions, and so on.

Progressive format

Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames (60 fields) in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. This player is compatible with the 480 progressive format.

The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 of its original size. The DVD also uses the variable rate coding technology that changes the data to be allocated according to the status of the picture. The audio data is recorded in Dolby Digital as well as in PCM, allowing you to enjoy more real audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD.

File

Section of a picture on a data CD containing JPEG image files.

Film based software, Video based software

DVDs can be classified as Film based or Video based software. Film based DVDs contain the same images (24 frames per second) that are shown at movie theaters. Video based DVDs, such as television dramas or sit-coms, displays images at 30 frames (or 60 fields) per second.

Interlace format

Interlace format shows every other line of an image as a single field and is the standard method for displaying images on television. The even number field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image.

Multi-angle function Various angles, or viewpoints of the video camera, for a scene are recorded on some DVDs.

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

77GB

Region Code

This system is used to protect copyrights. A region number is allocated on each DVD system or DVD disc according to the sales region. Each region code is shown on the system as well as on the disc packaging. The system can play the discs that match its region code. The system can also play discs with the ALL mark. Even when the region code is not shown on the DVD, the region limit may still be activated.

Scene

On a VIDEO CD with PBC (playback control) functions, the menu screens, moving pictures and still pictures are divided into sections called scenes.

Title

The longest sections of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software.

Track

Sections of a picture or a music piece on a CD, VIDEO CD or MP3. An album is composed of several tracks (MP3 only).

VIDEO CD

A compact disc that contains moving pictures. The picture data uses the MPEG 1 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/140 of its original size. Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. VIDEO CDs also contain compact audio data. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. VIDEO CDs can hold 6 times the audio information of conventional audio CDs. There are 2 versions of VIDEO CDs. Version 1.1: You can play only moving

pictures and sounds. Version 2.0: You can play high-resolution

still pictures and enjoy PBC functions. This system conforms to both versions.

HT-C800DP 4-247-292-11(1)

78GB

Specifications

AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6 ohm loads, both channels driven, from 120 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milliwatts to rated output (USA model only).

Amplifier section Rated Power Output at Stereo Mode 60 W + 60 W (6 ohms, at 1 kHz, THD 0.7 %) Reference Power Output Front: 100 W/ch (6 ohms at 1 kHz, THD 10 %)

Center*: 100 W (6 ohms at 1 kHz, THD 10 %) Surround*: 100 W/ch (6 ohms at 1 kHz, THD 10 %) Sub woofer*: 100 W (6 ohms at 100 Hz, THD 10 %)

* Depending on the sound field settings and the source, there may be no sound output.

Inputs (Analog) ANALOG IN: Sensitivity: 500 mV Impedance: 50 kilohms

Outputs (Analog) PHONES: Accepts low- and high-impedance headphones

CD/DVD system Laser Semiconductor laser

(DVD: = 650 nm) (CD: = 780 nm) Emission duration: continuous

Signal format system NTSC/PAL or NTSC Frequency response (at 2 CH STEREO mode)

DVD (PCM): 2 Hz to 22 kHz (1.0 dB) CD: 2 Hz to 20 kHz (1.0 dB)

Signal-to-noise ratio More than 80 dB Harmonic distortion Less than 0.03 %

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

79GB

FM tuner section System PLL quartz-locked digital synthesizer system Tuning range North American models: 87.5 108.0 MHz (100 kHz step) Other models: 87.5 108.0 MHz (50 kHz step) Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz

AM tuner section System PLL quartz-locked digital synthesizer system Tuning range North American models: 530 1,710 kHz (with the interval set at 10 kHz)*

531 1,710 kHz (with the interval set at 9 kHz)* European models: 531 1,602 kHz (with the interval set at 9 kHz) Mexican models: 530 1,610 kHz (with the interval set at 10 kHz) Other models: 530 1,610 kHz (with the interval set at 10 kHz)*

531 1,602 kHz (with the interval set at 9 kHz)* Antenna AM loop antenna Intermediate frequency 450 kHz * To change the AM tuning interval, see page 28.

Video section Inputs Video: 1 Vp-p 75 ohms Outputs Video: 1 Vp-p 75 ohms

Component: Y: 1 Vp-p 75 ohms PB/CB: 0.7 Vp-p 75 ohms PR/CR: 0.7 Vp-p 75 ohms

Speakers Front/Surround European models (SS-MSP2) Other models (SS-MSP75) Speaker system Bass reflex Speaker unit 70 100 mm cone type Rated impedance 6 ohms Dimensions (approx.) SS-MSP2: 81 141 121 mm (3 1/4 5 5/8 4 7/8 inches)

SS-MSP75: 90 150 124.5 mm (35/8 6 5 inches) Mass (approx.) 0.8 kg (1 lb 13 oz.)

Center European models (SS-CNP2) Other models (SS-CNP75) Speaker system Bass reflex Speaker unit 70 100 mm cone type Rated impedance 6 ohms Dimensions (approx.) SS-CNP2: 230 81 121 mm (9 1/8 3 1/4 4 7/8 inches)

SS-CNP75: 230 90 127 mm (9 1/8 3 5/8 5 inches) Mass (approx.) 1.0 kg (2 lb 4 oz.)

continued

HT-C800DP 4-247-292-11(1)

80GB

Sub woofer (SS-WMSP80) Speaker system Bass reflex Speaker unit 200 mm dia. cone type Rated impedance 6 ohms Dimensions (approx.) 270 325 333 mm (10 6/8 12 7/8 13 1/8 inches) Mass (approx.) 6.5 kg (14 lb 6 oz.)

General Power requirements North American and Mexican models:

120 V AC, 60 Hz European models: 230 V AC, 50/60 Hz Other models: 120/220 V AC, 50/60 Hz Power consumption Canadian models: 240 VA Other models: 190 W Power consumption (at Power Saving Mode):

0.5 W Dimensions (approx.) 430 170 450 mm (17 6 7/8 17 7/8 inches) (w/h/d) incl. projecting

parts Mass (approx.) 11.5 kg (25 lb 6 oz.) Operating temperature 5C to 35C (41F to 95F) Operating humidity 5 % to 90 % Supplied accessories See page 18.

Design and specifications are subject to change without notice.

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

81GB

Language Code List

For details, see pages 48, 54, 65. The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language Code Language Code Language Code Language

1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali 1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian 1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian 1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati 1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho 1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese 1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish 1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili 1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil 1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu 1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik 1066 Bengali; 1248 Indonesian 1393 Occitan 1528 Thai

Bangla 1253 Icelandic 1403 (Afan) Oromo 1529 Tigrinya 1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen 1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog 1079 Catalan 1261 Japanese 1428 Polish 1534 Setswana 1093 Corsican 1269 Yiddish 1435 Pashto; Pushto 1535 Tonga 1097 Czech 1283 Javanese 1436 Portuguese 1538 Turkish 1103 Welsh 1287 Georgian 1463 Quechua 1539 Tsonga 1105 Danish 1297 Kazakh 1481 Rhaeto- 1540 Tatar 1109 German 1298 Greenlandic Romance 1543 Twi 1130 Bhutani 1299 Cambodian 1482 Kirundi 1557 Ukrainian 1142 Greek 1300 Kannada 1483 Romanian 1564 Urdu 1144 English 1301 Korean 1489 Russian 1572 Uzbek 1145 Esperanto 1305 Kashmiri 1491 Kinyarwanda 1581 Vietnamese 1149 Spanish 1307 Kurdish 1495 Sanskrit 1587 Volapk 1150 Estonian 1311 Kirghiz 1498 Sindhi 1613 Wolof 1151 Basque 1313 Latin 1501 Sangho 1632 Xhosa 1157 Persian 1326 Lingala 1502 Serbo-Croatian 1665 Yoruba 1165 Finnish 1327 Laothian 1503 Singhalese 1684 Chinese 1166 Fiji 1332 Lithuanian 1505 Slovak 1697 Zulu 1171 Faroese 1334 Latvian; Lettish 1506 Slovenian 1174 French 1345 Malagasy 1703 Not specified 1181 Frisian

HT-C800DP 4-247-292-11(1)

82GB

DVD Setup Menu List

You can set the following items with the DVD setup menu. The order of the displayed items may be different from the actual display.

LANGUAGE SETUP

OSD (Select the language you want to use from the displayed language list.)

DVD MENU (Select the language you want to use from the displayed language list.)

AUDIO (Select the language you want to use from the displayed language list.)

SUBTITLE (Select the language you want to use from the displayed language list.)

SCREEN SETUP

TV TYPE 16:9 4:3 LETTER

BOX 4:3 PAN SCAN

SCREEN SAVER ON OFF

BACKGROUND JACKET PICTURE GRAPHICS BLUE BLACK

COMPONENT OUT INTERLACE PROGRESSIVE

CUSTOM SETUP

PARENTAL LEVEL OFF CONTROL 8.

7. NC17 6. R 5. 4. PG13 3. PG 2. 1. G

STANDARD USA OTHERSt

CHANGE PASSWORD TRACK OFF SELECTION AUTO AUDIO OFF DRC STANDARD

MAX DATA MP3 CD JPEG PRIORITY

JPEG MM/DD/YYYY DATE YYYY/MM/DD

DD/MM/YYYY YYYY/DD/MM

SPEAKER SETUP

SIZE FRONT YES CENTER YES

NONE SURROUND YES

NONE SUB WOOFER YES

DISTANCE1) FRONT 1.0m ~ 7.0m/ 3ft. ~ 23ft.

CENTER 1.0m ~ 7.0m/ 3ft. ~ 23ft.

SURROUND 1.0m ~ 7.0m/ 3ft. ~ 23ft.

LEVEL CENTER 10 dB ~ +10 dB SURROUND- 10 dB ~ +10 dB LEFT SURROUND- 10 dB ~ +10 dB RIGHT SUB WOOFER 10 dB ~ +10 dB

BALANCE FRONT 6 steps left or right TEST OFF TONE ON

1) In SPEAKER SETUP, the North American models OSD displays both metric and imperial measurements. The other models displays metric measurements only. This manual shows both.

A d

d itio

n al In

fo rm

atio n

HT-C800DP 4-247-292-11(1)

83GB

Index

Numerics 16:9 65 4:3 LETTER BOX 65 4:3 PAN SCAN 65

A ALBUM 33, 35 Album 7, 75 ANGLE 53 Antenna Hookups 22 AUDIO 48

B BACKGROUND 66 BALANCE 70 BAND 27 Batteries 18

C CHAPTER 43 Chapter 7, 75 COMPONENT OUT 66 Continuous play

CD/VIDEO CD/DVD/MP3 29 Control Menu 16 CUSTOM PARENTAL

CONTROL 55 CUSTOM SETUP 67

D DATA CD PRIORITY 68 DIMMER 61 DISTANCE 69 Dolby Digital 75 Dolby Pro Logic Surround 75 DTS 75 DVD 75 DVD MENU 31

F Fast forward 40 Fast reverse 40 File 7 Front Panel 11 Front panel display 12

H Handling discs 10

I INDEX 43 Index 7

J JPEG 34

L LANGUAGE SETUP 64 LEVEL 69

M MP3 33 Multi-angle function 53, 76 Multilingual function 48, 76 MUTING 30

O On-screen display

Control Menu display 16 Setup Display 63

OSD 64

P PARENTAL CONTROL 55, 67 PBC Playback 32, 76 PLAY MODE 38 Preset Station 27 Program Play 36 PROGRESSIVE 66, 71

R Radio 62 Rear Panel 14 Region code 8, 77 Remote 15, back page REPEAT 39 RESET 64 Resume Play 31

S Scan 40 SCENE 16 Scene 7, 77 SCREEN SAVER 66 SCREEN SETUP 65 SHUFFLE 38 Shuffle Play 38 SIZE 68 Slow-motion Play 40 Sound Field 50 SPEAKER SETUP 68 Speaker System Hookup 19 SUBTITLE 54

T TEST TONE 70 TIME 43 TIME SEARCH 43 TITLE 42 Title 7, 77 TRACK 42 Track 7, 77 TRACK SELECTION 67 Troubleshooting 71 TV and Video Component

Hookups 24 TV TYPE 65

U Usable discs 7

V VIDEO CD 29, 32

Quick reference for Remote Commander

Note

The remote control of the unit employs command signals in common with other Sony DVD products. Thus, depending on the button, other Sony DVD products may respond.

1 SOUND FIELD +/ Selects the sound field.

2 FUNCTION Selects the component you want to use.

3 ST/MONO Switches monaural or stereo of FM stereo reception.

4 BAND Selects AM or FM band.

5 REPEAT Displays the REPEAT display on the TV screen.

6 PLAY MODE Selects program or shuffle play mode.

7 Number buttons Selects the items of settings.

8 ./>, PRESET +/ ./>: Press to go to the next chapter or track or to go back to the previous chapter or track. PRESET +/ : Scan all preset stations.

9 X PAUSE Pauses playing a disc.

q; H Plays a disc.

f

F

G g

H X

m M

yy

. >

FUNCTION

BAND

PLAY MODE REPEAT TIME

AUDIO

ANGLE

SUBTITLE

CLEAR

MEMORY D. SKIP

OPEN/ CLOSE

ST/MONO

SYSTEM STANDBY

SOUND FIELD

TV ?/1

1 2 3

4 5 6

7 8 9

10/0>10 ENTER

PRESET

TOP MENU DVD ALBUM

+ MENU DVD MUTING

RETURN

TV/ VIDEO

DVD DISPLAY

VOLUME

+ +TUNING

SLOW

x

?/1

O

TV VOL TV CH BASS BOOST

DIMMER DVD

SETUP

qa DVD MENU/ALBUM + Displays the DVD menu on the TV screen.

qs DVD TOP MENU/ALBUM Displays the title menu on the TV screen.

qd C/X/x/c/ENTER Selects and executes the items or settings.

qf DVD DISPLAY Displays the Control Menu display on the TV screen to set or adjust the items.

qg TV VOL +/ Adjust the volume of the TV.

qh TV CH +/ Select preset TV channels.

qj TV [/1 (on/standby) Turns the TV on and off.

qk [/1 (on/standby) Turns on and off the power of the system.

ql Z OPEN/CLOSE Opens or closes the disc tray.

w; MEMORY Press to store a preset station.

wa D.SKIP Skips discs.

ws TIME Displays the playing time of the disc, etc., on the front panel display.

wd AUDIO Changes the sound while playing a DVD or VIDEO CD.

wf ANGLE Changes the angles when playing a DVD.

wg SUBTITLE Changes the subtitles when playing a DVD.

wh ENTER Executes the items or settings.

wj CLEAR Press to return to the Continuous play, etc.

wk m/M, / SLOW, TUNING +/ m/M (SCAN) : Locate a point while monitoring the picture while playing disc.

/ (SLOW) : Play a disc in slow motion in the pause mode. TUNING +/ : Scan all available radio stations.

wl x STOP Stops playing a disc.

e; MUTING Mutes the sound.

ea VOLUME +/ Adjust the SYSTEM volume.

es O RETURN Press to return to the previously selected screen, etc.

ed TV/VIDEO Changes the input mode of the TV.

ef BASS BOOST Adjust the bass tone.

eg DVD SETUP Displays the setup display on the TV screen to set or adjust the items.

eh DIMMER Chang