Sony PlayStation 3 PS3 CECH-ZVS1B Instruction Manual PDF

Surround Sound System Instruction Manual

CECH-ZVS1A / CECH-ZVS1B / CECH-ZVS1E

2 GB

WARNING

This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the system itself has been turned off.

To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place lighted candles or other sources of an open flame on the apparatus.

To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing liquids, and do not place objects filled with liquids, such as vases, on the apparatus.

As the main plug is used to disconnect the system from the AC power source, connect the system to an easily accessible AC outlet. Should you notice an abnormality in the system, disconnect the main plug from the AC outlet immediately.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Do not expose battery or apparatus with battery installed to excessive heat sources such as direct sunlight or fire.

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

The nameplate is located on the bottom exterior.

Precautions AC adaptor and AC power cord use Do not plug the AC power cord for the system into

an electrical outlet until you have made all other connections. Make sure the TV or other component is unplugged from the electrical outlet prior to connecting it to the system.

Do not connect the AC power cord to a voltage transformer or inverter. Connecting the AC power cord to a voltage transformer for overseas travel or an inverter for use in an automobile may cause heat to build up in the AC adaptor and may cause burns or a malfunction.

Do not use an AC adaptor or AC power cord other than the supplied AC adaptor and AC power cord. Do not modify the cord.

Do not touch the plug of the AC power cord with wet hands.

Do not touch the AC power cord, AC adaptor or the system, if connected to an electrical outlet, during an electrical storm.

Do not place heavy items on the cord. Do not place the AC power cord near heating

equipment and do not expose the cord to heat. Unplug the AC power cord from the electrical outlet

before cleaning or moving the system, or when you do not intend to use the system for an extended period of time. When disconnecting, grasp the power cord by the plug and pull straight out of the electrical outlet. Never pull by the cord and do not pull out at an angle.

Use and Handling Although the system heats up during operation, this is

not a malfunction. If you continuously use this system at high volume levels, the operating temperature at the back and bottom of the unit will rise considerably. To avoid burning yourself, do not touch the system.

Place the system in a location with adequate ventilation to prevent heat buildup and prolong the life of the system.

Do not place the system on surfaces that are unstable, tilted or subject to vibration.

Do not place the system near equipment such as a CRT (tube) TV, VCR, or tape deck. (If the system is being used in combination with a CRT (tube) TV, VCR, or tape deck, and is placed too close to that equipment, noise may result, and picture quality may suffer. This is especially likely when using an indoor aerial.) (Use of an outdoor aerial is recommended.)

3 GB

The system is magnetically shielded to allow it to be installed near a TV. However, colour irregularities may still be observed on certain types of TVs. If colour irregularity is observed, turn off the TV, and then turn it back on after 15 to 30 minutes. If colour irregularity is observed, again, move the system further away from the TV.

Do not use the openings on the rear to pick up or hold the system and do not insert your fingers or hands into them as this may cause injury or may damage the system.

Use caution when placing the system on surfaces that have been specially treated (such as with wax, oil, or polish), as staining or discolouration of the surface may result.

Cleaning Follow these instructions to help prevent the product exterior from deteriorating or becoming discoloured. Wipe with a soft, dry cloth. Do not place any rubber or vinyl materials on the

product exterior for an extended period of time. Do not use solvents or other chemicals. Do not wipe

with a chemically-treated cleaning cloth.

4 GB

Table of contents Precautions ............................................... 2

Getting Started Unpacking ................................................ 5 Part names and functions ......................... 7 Positioning ............................................. 10 Connecting the PlayStation3 system .... 11 Connecting the AC power cord .............. 11 Setting up the audio output of the PS3

system .............................................. 12

Playing sound from the PS3 system

Selecting the input source ...................... 13 Enjoying the surround sound effect ....... 13 Other effects ........................................... 14

System Settings Using the menu ...................................... 15 Adjusting various settings ...................... 15

Additional Information Troubleshooting ..................................... 17 Specifications ......................................... 18 GUARANTEE ....................................... 19 Copyright and trademarks ...................... 19

5 GB

Getting Started

Unpacking

G etting S

tarted Surround sound system (1) Remote control (RM-ANU095) (1)

AC adaptor (1) AC power cord (1) Instruction manual

(this document) (1)

Optical digital cable (2.5 m) (1)

Preparing the remote control Before using the remote control for the first time, remove the insulation film from the battery case. (The battery is factory installed.)

Replacing the battery The battery will last about six months with normal use. When the battery charge is low, the remote control may not operate properly or the distance within which you can operate the remote control may become shorter. In this case, follow the procedure below to replace the battery.

1 Take out the battery case while pushing the tab and holding onto the notch with your fingernail.

6 GB

2 Replace the CR2025 battery with a new one, with the + side facing up.

Lithium battery CR2025 (sold separately)

3 Push the battery case back in position until you hear a click.

7 GB

G etting S

tarted

Part names and functions

Front

VOLINPUT

A POWER indicator Lights as follows: Green: The system is turned on. No light: The system is turned off.

B Display

C IR receiver

Caution

Do not expose the IR receiver to direct sunlight or excessive light, or the remote control may not work.

D Power button

E INPUT button Press to select the input source. Press the INPUT button repeatedly to switch between digital input and analogue input.

F VOL + button / VOL button

G Sound field button Press to select the sound field. Every time you press the button, the sound field changes cyclically as follows: DYNAMIC t STEREO t VIVID t STD t DYNAMIC

8 GB

Rear

Display

A Audio input connectors Audio output equipment such as a PSP (PlayStationPortable) system can be connected to this input using the appropriate adaptor cable (sold separately).

B DIGITAL input connector Audio input from a PS3 system.

C DC IN 18V connector

A Audio format indicators Indicates the audio format that is being input to the system. AAC: MPEG-2 AAC

PLII: Dolby Pro Logic II D: Dolby Digital

DTS LPCM: Linear PCM

B NIGHT Lights up in NIGHT mode.

C OPT Lights up when the input is set to DIGITAL.

D Message display area Displays volume, settings menu, sound field, selected input source, etc.

9 GB

G etting S

tarted

A Power button

B DISPLAY button You can change the behaviour of the display. Press the DISPLAY button repeatedly to switch between ON and OFF. The default setting is ON. ON: The display stays turned on. OFF: The display appears for a few seconds

when you operate the system. At all other times, the display stays turned off.

Hint

The display stays turned on when the muting or protection function is working, even if you set DISPLAY to OFF.

C Up button / Down button Press to select the setting.

D ENTER button Press to enter the selected item.

E MUTING button Press to turn off the sound temporarily. Press the MUTING button repeatedly to switch between ON and OFF.

F VOL + button / VOL button

G Sound field buttons

H NIGHT button

I DIALOG button

J RETURN button Press to return to the previous item in the menu, or exit from the menu.

K MENU button

L INPUT button

Remote control You can operate the surround sound system with the supplied remote control.

Hint

Point the remote control towards the IR receiver ( ) of the surround sound system.

NIGHT DIALOG MUTING

VOLSTEREODYNAMIC

VIVID STD

INPUT

MENU DISPLAY

RETURN ENTER

10 GB

Positioning Place the system in front of the TV.

Hints

Allow a space of 5 cm or more between the rear of the system and the TV or a wall. Do not block the IR receiver of the TV with the system. If you do so, you may not be able to operate the TV with the

TVs remote control. During installation, do not use the openings on the rear to pick up or hold the system. Place the system on a flat and stable location. Do not place the system at an angle, as this may cause an undesirable

vibration.

11 GB

Connecting the PlayStation3 system

Connecting the AC power cord

Connect the DIGITAL OUT (OPTICAL) connector of your PS3 system to the DIGITAL input connector of the surround sound system using an optical digital cable.

Do not plug the AC power cord for the surround sound system into an electrical outlet until you have made all other connections.

1 Connect the AC power cord to the AC adaptor. AC adaptor

AC power cord

2 Plug the connector of the AC adaptor into the DC IN 18V connector on the rear of the surround sound system.

3 Plug the AC power cord into the AC power outlet.

Caution

After connecting the AC power cord, wait about 20 seconds before pressing the power button to turn on the system. Connect the system to an easily accessible electrical outlet. Should you notice an abnormality in the system,

disconnect the plug from the electrical outlet immediately.

DIGITAL

Rear

DIGITAL OUT (OPTICAL) connector

Optical digital cable

PS3 system

G etting S

tarted

12 GB

Setting up the audio output of the PS3 system 1 Select (Sound Settings) under (Settings) in the XMB (XrossMediaBar) menu on

the PS3 system.

2 Select [Audio Output Settings].

3 Select [Optical Digital].

4 Select the following output formats. Dolby Digital 5.1 Ch. DTS 5.1 Ch. AAC Linear PCM 2 Ch. 44.1 kHz Linear PCM 2 Ch. 48 kHz

Outputting sound of the PS3 system from the system and the TV

1 Select (Sound Settings) under (Settings) in the XMB menu on the PS3 system.

2 Select [Audio Multi-Output].

3 Select [On].

Hints

The HDMI OUT connector and the AV MULTI OUT connector of the PS3 system can also output Linear PCM 2 ch.

Turn the volume of the TVs speaker down to a minimum level when you use the surround sound system. When you are finished using the surround sound system, return the TVs speaker to the desired volume level.

To set the [Audio Multi-Output] to [On], the system software of the PS3 system must be version 3.30 or higher.

13 GB

Playing sound from the PS3 system

Selecting the input source

Enjoying the surround sound effect

INPUT

MENU DISPLAY

RETURN ENTER

INPUT button

Press the INPUT button to select DIGITAL or ANALOG.

The selected input source appears in the display. Press the INPUT button repeatedly to switch between DIGITAL and ANALOG.

Input source Playable component

DIGITAL PS3 system connected to the DIGITAL input connector.

ANALOG PSP system connected to the audio input connectors.

This system can create surround sound effects which are suitable for games played on the PS3 system. You can select one of the systems optimized pre-programmed sound fields. The default setting is DYNAMIC.

Press one of the sound field buttons you want to use.

The selected sound field appears in the display.

Available sound fields

Sound field Effect

DYNAMIC This mode provides a wide range of tones with low/high frequencies and dynamic sounds.

STEREO This mode is suitable for any sound quality, optimized for video games implementing 2 ch stereo sound. Multiple channels are down-mixed.

VIVID This mode provides a wide sound range and enhances the surround sound channels.

STD (standard) This mode reproduces the sound track with the kind of dynamic range that the recording engineer intended.

Hint

You can set a different sound field for each input source.

NIGHT DIALOG MUTING

VOLSTEREODYNAMIC

VIVID STDSound field buttons

P laying sound from

the P S

3 system

14 GB

Other effects

Enjoying the sound clearly at low volume (NIGHT mode) You can enjoy sound effects and hear the dialogue clearly even at low volume levels using this function. The default setting is OFF.

NIGHT DIALOG MUTING

VIVID STD

INPUT

MENU DISPLAY

RETURN ENTER

NIGHT button

DIALOG button

Press the NIGHT button repeatedly to switch between ON and OFF.

ON: Turns on the NIGHT mode function. OFF: Turns off the function.

Press the DIALOG button to select the setting.

Every time you press the button, the dialogue mode changes cyclically as follows: MID t HIGH t LOW t MID

LOW: Set the speech level to minimum. MID: Set the speech level to standard. HIGH: Set the speech level to maximum.

Caution

This effect is disabled when the sound field is set to STEREO.

Listening to in-game speech and narration clearly (DIALOG mode) This function allows you to hear in-game speech and narration with greater clarity. The default setting is MID.

NIGHT DIALOG MUTING

VIVID STD

INPUT

MENU DISPLAY

RETURN ENTER

15 GB

MENU button

Up button/ Down button

ENTER button

System Settings

Using the menu

S ystem

S ettings

NIGHT DIALOG MUTING

INPUT

MENU DISPLAY

RETURN ENTER

1 Press the MENU button to turn on the menu.

2 Press the up button / down button repeatedly to select the item to be adjusted, and press the ENTER button to enter your selection.

3 Press the MENU button to turn off the menu.

You can set the following items with the MENU button on the remote control. The default settings are underlined.

MENU

SW LVL 6, 5, 0, +5, +6

ON OFF

BASS 6, 5, 0, +5, +6

TREBLE 6, 5, 0, +5, +6

DRC

ON OFF

SYNC

M/S MAIN SUB

DUAL

ON OFF

DIMMER

ON OFF

A.STBY

Hint

These settings are retained even if you disconnect the AC power cord.

Adjusting various settings

SW LVL (Subwoofer Level) You can adjust the level of the subwoofer. The setting range is from 6 to +6 in 1-step increments.

DRC (Dynamic Range Control) Narrows the dynamic range of the sound track. Useful for gaming at low volume. DRC only applies to Dolby Digital sources. ON: Reproduces the sound track with

the kind of dynamic range that the recording engineer intended.

OFF: No compression of dynamic range.

BASS You can adjust the bass level. The setting range is from 6 to +6 in 1-step increments.

TREBLE You can adjust the treble level. The setting range is from 6 to +6 in 1-step increments.

SYNC You can delay the audio using this function when the audio is out of sync with the video. ON: Adjusts the difference between audio

and video. OFF: No adjustment.

Hint

You may not be able to adjust the delay between sound and video perfectly using this function.

16 GB

DUAL You can enjoy multiplex broadcast audio when the system receives an AC-3 multiplex broadcast signal. M/S: Main channel is output from the left

speaker and sub channel is output from the right speaker.

MAIN: Plays only the main channel. SUB: Plays only the sub channel.

DIMMER The brightness of the display can be set to one of 2 levels. ON: Dim. OFF: Normal.

A.STBY You can reduce power consumption using this function. The surround sound system enters standby mode automatically when there is no audio output for 30 minutes. ON: Turns on the A.STBY function. OFF: Turns off the function.

Hint

A.STBY begins to flash in the display about two minutes before the system enters standby mode.

17 GB

Additional Information

Troubleshooting

A dditional Inform

ation

Go through this section if you experience difficulty in operating the system. Also visit http://eu.playstation.com/help-support. Should any problem persist, contact SCEE Consumer Services (back cover) for assistance.

POWER

The power is not turned on. Check that the AC adaptor and the AC power

cord are connected securely.

The system is turned off automatically. The auto standby function is working

(page 16).

SOUND

Dolby Digital or DTS multi-channel audio is not reproduced.

Check that the Blu-ray Disc, DVD, etc., is recorded in Dolby Digital or DTS format.

Check that [Audio Output Settings] under (Settings) (Sound Settings) on the

PS3 system are set correctly (page 12).

The surround effect cannot be produced. Depending on the digital signal, the surround

processing may not work (page 13).

Audio lags video. Set SYNC to OFF if SYNC is set to

ON.

No sound or only a very low-level sound of the PS3 system is heard from the system.

Press the VOL + button and check the volume level.

Press the MUTING button or the VOL + button to cancel the muting function.

Check that the input source is correctly selected.

Check that the cable connecting the system and the PS3 system is fully inserted.

Sound is interrupted or there is noise. Check Digital input formats supported by

this system (page 18).

The remote control does not function

Point the remote control at the IR receiver on the surround sound system.

Remove any obstacles in the path between the remote control and the system.

Replace the battery in the remote control with a new one, if it is weak.

Make sure you select the correct input on the remote control.

OTHER

PROTECT appears in the display Press the power button to turn off the power.

After STANDBY disappears, make sure that the ventilation slots are not blocked.

If the surround sound system still does not operate properly after performing the above measures

Reset the system by following the procedure below.

1 Press the power button to turn on the power.

2 Press the power button while pressing the INPUT button and the VOL button. RESET appears and the system is reset. Menu, sound field, etc., return to the default settings.

18 GB

Specifications Digital input formats supported by this system

Digital input formats supported by this system are as follows.

Dolby Digital DTS MPEG-2 AAC Linear PCM (2 ch)*

* Linear PCM accepts sampling frequencies of no more than 48 kHz.

Amplifier section POWER OUTPUT (reference) L / R: 10 W

(per channel at 6 ohms, 1 kHz)

Subwoofer: 15 W + 15 W (at 8 ohms, 100 Hz)

Speaker Front speaker unit Speaker system Full range, bass reflex Speaker units 50 mm 90 mm Rated impedance 6 ohms Subwoofer unit Speaker system Subwoofer system, passive

radiator type Speaker units 65 mm 2 (subwoofer)

65 mm 4 (passive radiator)

Rated impedance 8 ohms

General Inputs Analogue (1)

Digital (Optical) (1) Power requirements 18 V DC (2.6 A) (100 V -

240 V AC, 50/60 Hz using the supplied AC adaptor)

Power consumption In standby mode: 0.5 W or less

Main unit Dimensions (approx.) 720 mm 85 mm 87 mm

(w/h/d) Mass (approx.) 2.4 kg

AC adaptor Input AC 100 V - 240 V,

50/60 Hz Output DC 18 V, 2.6 A Dimensions (approx.) 121 mm 53 mm 33 mm

(w/h/d) Mass (approx.) 240 g

Design and specifications are subject to change without notice.

19 GB

A dditional Inform

ation This product may fall within the scope of national export control legislation. You must comply fully with the requirements of such legislation and of all other applicable laws of any jurisdiction in relation to this product.

For customers in Europe

The manufacturer of this product is Sony Computer Entertainment Inc., 2-6-21 Minami-Aoyama, Minatoku Tokyo, 107-0062 Japan. The Authorized Representative for EMC and product safety in Europe is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP, United Kingdom.

Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment/batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste. This symbol may be used on batteries in combination with additional chemical symbols. The chemical symbols for mercury (Hg) or lead (Pb) will appear if the battery contains more than 0.0005% mercury or more than 0.004% lead.

GUARANTEE For manufacturers warranty details, please refer to the PlayStation3 system instruction manual.

Copyright and trademarks 2, PlayStation and PSP are registered trademarks of Sony Computer Entertainment Inc. is a trademark of the same company.

XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

SONY and are registered trademarks of Sony Corporation.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, the AAC logo, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

Online users guide Accessible via : eu.playstation.com/manuals This guide contains detailed information about using the PS3 system.

Support http://eu.playstation.com/help-support The official site for PlayStation product support provides the latest questions and answers about your product.

2010 Sony Computer Entertainment Inc. All rights reserved.