Contents

Sony SWR12 v2 User's Guide PDF

1 of 17
1 of 17

Summary of Content for Sony SWR12 v2 User's Guide PDF

User guide

SmartBand 2 (for iOS) SWR12

Contents

Basics.............................................................................................3 Introduction.......................................................................................3 Hardware overview........................................................................... 3 Charging your SmartBand 2............................................................. 4 Assembly...........................................................................................4 Wearing your SmartBand 2...............................................................5 Turning on and off............................................................................ 6

Setting up your SmartBand 2........................................................7 Preparing to use your SmartBand 2................................................. 7 Reconnecting the SmartBand 2........................................................7 Resetting your SmartBand 2.............................................................7

Using your SmartBand 2............................................................... 8 Using the SmartBand 2 application..................................................8 Getting notified.................................................................................8 Get moving....................................................................................... 8 Measuring Stress & Recovery........................................................... 8 Smart wake up alarms..................................................................... 11 Out-of-range alert notifications...................................................... 12 Do not disturb..................................................................................12 Remote control................................................................................ 12 Connecting to Health...................................................................... 13 Notification lights............................................................................ 13

Important information.................................................................14 Using your SmartBand 2 in wet and dusty conditions................... 14 Legal information............................................................................ 14

2

Basics

Introduction Your SmartBand 2 is a companion product that connects wirelessly via Bluetooth with your iPhone. Worn on your dominant wrist, it can monitor your body movements and interact with your iPhone to generate data about your daily life and habits. For example, the SmartBand 2 counts your steps and records data about your physical state while you walk or run.

Your SmartBand 2 is a device you can wear everyday and features a sensor that monitors your pulse and helps determine your heart rate. When used with a compatible iPhone device, you can use the SmartBand 2 to receive notifications and manage your alarms and phone calls.

Before you can get started using your SmartBand 2, you must download the SmartBand 2 application and set up the accessory to work with your iPhone. Also, remember that your iPhone must be running on iOS version 8.2 or higher.

Hardware overview

1 Wristband

2 Power key cover

3 Power key

4 Notification light A

5 Notification light B

6 Notification light C

7 Core

8 Ventilation hole

9 Heart rate sensor

10 Micro USB port

The ventilation hole is not used for resetting the device. Do not insert or force sharp objects in the hole as this may damage the device.

3

This is an Internet version of this publication. Print only for private use.

Charging your SmartBand 2 Before using your SmartBand 2 for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended.

Your SmartBand 2 turns off automatically when the charger is connected. You cannot turn on the device while a charger is connected.

To charge your SmartBand 2

1 Plug one end of the USB cable into the charger or into the USB port of a computer.

2 Plug the other end of the cable into the Micro USB port of your SmartBand 2. 3 While the battery is charging, notification light A changes its color. The

notification light changes to green when you reach 90% battery power.

Make sure the USB port is dry before you insert a USB cable into the port.

Your SmartBand 2 turns off when connecting to a charger, and goes back to its previous on/off state when the charger is unplugged.

Battery notification light status

Red light Battery is charging and the charge level is less than 15%.

Orange light Battery is charging and the charge level is between 15% and 90%.

Green light Battery is charging and the charge level is greater than 90%.

To check the battery level of your SmartBand 2

On your iPhone, find and tap SmartBand 2. The battery percentage level appears on the home screen of your SmartBand 2 application.

You cannot check the battery level when your SmartBand 2 is charging.

Low battery level notification When your SmartBand 2 reaches a specific battery level, the device vibrates and the red light starts flashing every 4 seconds until you charge the device or it powers off. The low battery level notification is triggered when you have approximately 5 minutes left in Heart Activity mode and 75 minutes in STAMINA mode. The time varies depending on usage. When battery level is below 1%, your SmartBand 2 automatically turns off. You need to charge your SmartBand 2 when the battery runs out of power.

If the "Do not disturb" function is turned on, you will not get the low battery notification.

Assembly To personalise your SmartBand 2, you can replace the wristband with bands of different colour, which can be purchased separately.

4

This is an Internet version of this publication. Print only for private use.

To assemble your SmartBand 2

Insert the core into the wristband in such a way that the power key is inserted underneath the power key cover.

Wearing your SmartBand 2 You should wear the SmartBand 2 on your dominant hand and position the device on your wrist two fingers above the wrist bone. Wear your SmartBand 2 on your wrist snugly but comfortably, neither too tight nor too loose. In order for the SmartBand 2 to monitor your pulse, it should stay in place on your wrist. While you're exercising, tighten the wristband a bit. When you're done, loosen the wristband.

Caring for your SmartBand 2 and your skin To help avoid skin irritation, correctly adjust the bracelets fit around your wrist and clean your SmartBand 2 regularly. Rinse the SmartBand 2 with fresh water under a faucet and dry the device completely, particularly after performing rigorous activity, heavy sweating or exposing the device outdoors.

If you start to experience skin irritation or an allergic reaction, stop wearing your SmartBand 2. Contact your physician if symptoms persist.

5

This is an Internet version of this publication. Print only for private use.

Turning on and off

To turn on the SmartBand 2

Press and hold down the power key until your SmartBand 2 vibrates. All notification lights turn on one by one and then turn off.

When turning on your SmartBand 2 for the first time, it automatically enters pairing mode and notification light A flashes until your SmartBand 2 is connected to a device.

To turn off the SmartBand 2 Press and hold down the power key until your SmartBand 2 vibrates. All

notification lights are on simultaneously and then turn off one by one.

6

This is an Internet version of this publication. Print only for private use.

Setting up your SmartBand 2

Preparing to use your SmartBand 2 For your SmartBand 2 to work properly, you must install the latest version of the SmartBand 2 application on your iPhone, and then pair and connect your SmartBand 2 device with your iPhone using Bluetooth.

To set up your SmartBand 2 using Bluetooth

1 Make sure that your SmartBand 2 device is fully charged and turned on. 2 On your iPhone, make sure that you have installed and updated the

SmartBand 2 application to the latest version. 3 On your iPhone, open SmartBand 2, then follow the on-screen instructions.

You may need to update the firmware of your SmartBand 2 after its successfully paired with your iPhone.

If you don't see the introduction screen, you can tap the SmartBand 2 tab on your SmartBand 2 application for help regarding connecting your device.

Reconnecting the SmartBand 2 In cases where a connection gets lost, your SmartBand 2 automatically performs a series of reconnection attempts. If auto-reconnection fails, you can use the power key to manually force the accessory to try reconnecting with your iPhone.

To force the SmartBand 2 to try reconnecting

Briefly press the power key of your SmartBand 2 device, or tap Search for SmartBand 2 on the SmartBand 2 tab of your SmartBand 2 application on your iPhone.

If you still have issues connecting to your iPhone, tap the help button on the SmartBand 2 tab on your SmartBand 2 application and follow the on-screen instructions.

Resetting your SmartBand 2 Reset your SmartBand 2 if it behaves unexpectedly or if you want to connect it to a new device.

To perform a factory reset

1 Turn off your SmartBand 2. 2 Press and hold down the power key for 510 seconds until a green light

starts flashing.

To unpair your SmartBand 2

1 On your iPhone, find and tap Settings > Bluetooth. 2 Find SWR12 and tap , and then tap Forget This Device. 3 Tap Forget Device to confirm.

7

This is an Internet version of this publication. Print only for private use.

Using your SmartBand 2

Using the SmartBand 2 application You can view and change settings for your SmartBand 2 by using the SmartBand 2 application on your iPhone. You can also view your current pulse, stress and physical activities, such as steps, from the SmartBand 2 application.

Getting notified You can set your SmartBand 2 to vibrate when you get an incoming call or a notification from your iPhone.

All notifications on a connected iPhone can be forwarded to your SmartBand 2.

Notified by Vibration feedback Lights feedback

Incoming calls Vibrating continuously All lights flashing white continuously

Smart wake up alarm Vibrating continuously Not available

Other notifications Vibrating once Light A flashing white for 5 minutes

To turn on Notifications

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Notifications, then drag the sliders beside Incoming calls and Other

apps to the on position.

To reject an incoming call Briefly press the power key.

To turn on the Low vibration function Drag the Low vibration slider to the on position.

Get moving Your SmartBand 2 can remind you to get up and take a few steps when youve been idle for too long.

You can also manage the interval and time frame for these reminders.

To turn on the Get moving function

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Get moving, then drag the sliders to the on position.

Measuring Stress & Recovery Stress is a natural part of everyday life and contributes to the healthy and balanced overall condition of an individual. The Stress & Recovery values provided by the SmartBand 2 refer to a combination of your Heart Rate (HR) and Heart Rate Variability (HRV). SmartBand 2 analyses your Heart Rate Variability (HRV) and assesses how well your body manages stress levels during different situations throughout the day.

The SmartBand 2 can measure Heart Rate (HR) and Heart Rate Variability (HRV) even if the device is disconnected from your iPhone. Data collected using the heart

8

This is an Internet version of this publication. Print only for private use.

rate sensor is stored for up to 72 hours and synced to your iPhone once connected via Bluetooth.

This product is intended to help you track your exercise and lifestyle. It is not a medical device and data from it should never be used to make medical decisions (like preventing, diagnosing, monitoring, or treating a disease or injury) or replace the advice of a medical professional. Sony Mobile disclaims any warranty that this device could be used or suitable for medical purposes. Seek medical advice before undertaking a new or altered training regime using this device, particularly if using this device together with a pacemaker or other medical devices.

Extensive use of pulse and stress measurement increases battery consumption.

Pulse measurement Pulse measurement is the generally recommended method of determining your heart rate (HR), which can be a rough indicator of intensity of exercise. Pulse rate is expressed by the number of times your heart beats per minute (BPM). Although "pulse rate" and "heart rate" are two different concepts, the terms are used in the same context in this User guide.

Stress and recovery levels Stress & Recovery is determined using Heart Rate Variability (HRV). The heart rate is never constant and the time difference between two consecutive heartbeats changes from beat to beat. This variation is called Heart Rate Variability (HRV). If the variation in-between heartbeats is high, this indicates a relaxed or recovering state. If the variation is low, this indicates stress.

Activities such as reading a book may result in low stress levels, or can even be tracked as recovery. For example, busy moments at work or school may result in a high stress indication. It is important to note that a stress reaction does not have to be negative; it may also indicate that you are experiencing something exciting or fun. To balance periods of high stress, you need to recover by relaxing and sleeping well. A medium stress level may indicate effortless productivity, which is common during work and social activities.

Recovery mostly occurs while you sleep. There are factors that can affect your recovery measurements. A physically active lifestyle, healthy nutrition, lower consumption of alcohol, and elimination of stress factors make it possible to improve recovery during sleep in the long run. Avoiding highly strenuous physical activities and "slowing down" mental activities well before going to bed also have a positive effect on recovery.

Stress & Recovery values provided by the SmartBand 2 are not a reliable source for analysing overall fitness. Low intensity exercises, for example, can be misinterpreted incorrectly as recovery.

To get an measurement of your Stress & Recovery, wear your SmartBand 2 for at least one night when you go to bed.

How the SmartBand 2 measures your pulse and stress The SmartBand 2 uses green lights paired with lightsensitive photodiodes to detect the amount of blood flowing through your wrist at any given moment. By flashing its lights hundreds of times per second, the SmartBand 2 can calculate the number of times the heart beats each minute and provide an estimate of your heart rate.

Factors that affect pulse and stress measurement Several factors can affect the performance of the SmartBand 2 heart rate sensor.

Skin perfusion: the amount of blood flowing through the skin varies significantly from person to person and can also be impacted by the environment. If youre exercising in the cold, for example, the skin perfusion in your wrist may be too low for the heart rate sensor to get a result.

9

This is an Internet version of this publication. Print only for private use.

Movement: rhythmic movements such as running or cycling give better results from the heart rate sensor compared with irregular movements like in tennis or boxing.

Skin pigmentation variations: permanent or temporary changes to your skin, such as some tattoos. The ink, pattern, and saturation of some tattoos can block light from the sensor, making it difficult to get reliable results.

Getting the most from the SmartBand 2 heart rate sensor Even under ideal conditions, the SmartBand 2 may not be able to get a reliable heart rate reading every time for every individual. For a small percentage of users, various factors may make it impossible to get any heart rate reading at all. Perform the following steps if you want to improve the reading from the heart rate sensor:

Make sure that you wear your SmartBand 2 snugly, but comfortably on your wrist. If it does not stay in place on your wrist and the heart rate sensor fails to get a good reading, tighten the wristband.

You may need to clean the SmartBand 2, especially the heart rate sensor, after exercising or heavy sweating.

Measuring pulse and stress automatically The SmartBand 2 measures your pulse and stress and recovery level about six times an hour.

Measuring pulse and stress manually You can have your SmartBand 2 perform a reading of your pulse at any time, either from the device itself or from your iPhone.

To get the best heart rate data when exercising, initiate the heart rate sensor a few minutes before your physical activity so that the sensor is able to detect your pulse.

To measure your pulse and stress manually from your SmartBand 2

1 To start measuring your pulse and stress level, double-press the power key. The notification lights start to flash orange alternately and then together when the reading is complete. The results are then displayed on the SmartBand 2 application on your iPhone.

2 To end the measurement, double-press the power key again.

If the SmartBand 2 cannot detect your pulse, it vibrates three times and the notification lights start to flash alternately in orange. If the heart rate sensor fails to get a reading, adjust the SmartBand 2's position on your wrist or clean the sensor. For more information on improving the reading from the heart rate sensor, see Getting the most from the SmartBand 2 heart rate sensor on page 10.

To measure your pulse and stress manually from your iPhone

1 On your iPhone, open SmartBand 2. The SmartBand 2 immediately attempts to get a reading from the heart rate sensor and displays the results on the SmartBand 2 application.

2 To end the measurement, quit the SmartBand 2 application.

STAMINA mode To reduce battery consumption, you can turn on STAMINA mode, which disables automatic measurement of pulse and stress. You can still manually start a measurement even while your SmartBand 2 is in STAMINA mode.

10

This is an Internet version of this publication. Print only for private use.

To turn on/off STAMINA mode

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Stamina mode, then drag the slider beside Stamina mode to the on

position.

You can apply Stamina mode automatically by selecting the Low battery mode.

Smart wake up alarms You can set one or several Smart wake up alarms in the SmartBand 2 application. The Smart wake up alarm wakes you up at the best time based on your sleep cycle. The alarm notifies you with a continuous vibration. After you set a time frame for when you would like to be awoken by the alarm, your SmartBand 2 detects when you have reached a state of light sleep and then wakes you up.

For example, if you set a Smart wake up alarm for between 06:30 and 07:00 AM, the alarm wakes you up sometime between 06:30 and 07:00 AM when you reach a state of light sleep. If you do not reach a state of light sleep during this period, the Smart wake up alarm wakes you up at 07:00 AM.

If you want to add, remove or change a Smart wake up alarm, your SmartBand 2 must be connected to the iPhone.

To add a Smart wake up alarm

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Smart wake up, then tap . 3 Tap Wake up time and select the relevant values for the hour and minute. 4 To edit a period, tap Wake up interval and select the relevant value. 5 Tap Repeat, then mark the days on which you want the alarm to recur and

tap Edit Alarm. 6 When youre finished, tap Back.

To edit an existing Smart wake up alarm

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Smart wake up, then tap the alarm that you want to edit. 3 Edit the options as desired. 4 When youre finished, tap Back.

To delete a Smart wake up alarm

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Smart wake up, then tap the alarm that you want to delete. 3 Tap .

To turn on a Smart wake up alarm

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Smart wake up. 3 Drag the slider beside the alarm that you want to turn on.

To snooze a Smart wake up alarm when your SmartBand 2 vibrates Briefly press the power key.

To turn off a Smart wake up alarm when your SmartBand 2 vibrates Press and hold down the power key until your SmartBand 2 vibrates once

shortly.

To turn on the Low vibration function Drag the Low vibration slider to the on position.

11

This is an Internet version of this publication. Print only for private use.

Out-of-range alert notifications You can receive a notification when you leave your iPhone behind by turning on the Out-of-range alert notification. Your SmartBand 2 then notifies you with three short vibrations when the distance between your SmartBand 2 and the connected iPhone becomes too great and causes a disconnection. This function is turned off by default.

To turn on the Out-of-range alert notification function

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Drag the slider beside Out of range alert to the on position.

Do not disturb You can turn on the Do not disturb function if you do not want to be interrupted by notifications. When the Do not disturb function is enabled, only the Smart wake up alarm is active.

To turn on the Do not disturb function

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Notifications, then drag the slider beside Do not disturb to the on

position.

To set the Do not disturb interval

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Tap Notifications, then drag the slider beside Do not disturb to the on

position. 3 Tap Start and select the relevant values for the hour and minute. 4 Tap End and select the relevant values for the hour and minute.

Remote control You can use your SmartBand 2 to control playback from the Music application on the connected iPhone.

The three notification lights on the SmartBand 2 are blue when you are using it as a remote control.

To allow your SmartBand 2 to control the iPhone Music application

1 On your iPhone, open SmartBand 2, then tap SmartBand 2. 2 Drag the slider beside Music control to the on position.

To control music playback on your iPhone from your SmartBand 2

12

This is an Internet version of this publication. Print only for private use.

1 Make sure that your SmartBand 2 is connected to your iPhone. 2 Briefly press the power key on your SmartBand 2 and tap it immediately. The

three notification lights flash blue. 3 To play or pause the music file, tap the SmartBand 2 once. To go to the next

music file, tap twice. To go to the previous music file, tap three times. 4 To end remote control, briefly press the power key or wait for 10 seconds

without tapping the SmartBand 2. The three blue notification lights turn off.

Connecting to Health The SmartBand 2 application needs access to the Apple's Health application to be able to track your activities and progress.

To allow the Apple Health application access to data from the SmartBand 2 application

1 On your iPhone, open Health. 2 Tap Sources > SmartBand 2. 3 Drag the sliders beside all items.

The Health application does not track your stress level from the SmartBand 2 application.

Notification lights You can determine the status of your SmartBand 2 via the three notification lights on the device.

Notification light activity Status of the SmartBand 2

All lights illuminating in white one by one, then turning off simultaneously

Powered on

All lights illuminating in white simultaneously, then turning off one by one

Powered off

Light A flashing in green Factory data resetting/Updating firmware

Light A flashing in blue Connecting to an iPhone

All lights illuminating in blue one by one, then turning off simultaneously

Connected to an iPhone

All lights illuminating in white one by one, then turning off simultaneously

Not connected to an iPhone

All lights flashing in orange continuously Measuring pulse and stress and recovery level manually

All lights flashing in blue continuously Remote controlling

All lights flashing in red continuously Low battery level

All lights flashing in white continuously Incoming calls

Light A flashing in white for 5 minutes Other notifications

13

This is an Internet version of this publication. Print only for private use.

Important information

Using your SmartBand 2 in wet and dusty conditions Your SmartBand 2 is waterproof and protected against dust, so dont worry if you get caught in the rain or want to wash off dirt after wearing it for a period of time. But remember that the SmartBand 2 is only protected in fresh and chlorinated water up to 3m for a maximum of 30 minutes. Rinse the SmartBand 2 with fresh water under a faucet and dry the device completely after swimming. Abuse and improper use of your SmartBand 2 will invalidate warranty. The device has Ingress Protection rating IP65/68. For more info, see support.sonymobile.com.

Your SmartBand 2 has a capless USB port. The USB port must be completely dry before a cable can be connected for charging. If your SmartBand 2 gets exposed to water and the USB port gets wet, wipe the SmartBand 2 dry with a microfibre cloth and shake it several times with the USB port facing downwards. Repeat the procedure until no moisture is visible in the USB port.

Your warranty does not cover damage or defects caused by abuse or use of your SmartBand 2 against Sony Mobiles instructions. For more information about the warranty, refer to the Important information, which can be accessed via support.sonymobile.com.

Legal information

Sony SWR12 This product is intended to help you track your exercise and lifestyle. It is not a medical device and data from it should never be used to make medical decisions (like preventing, diagnosing, monitoring, or treating a disease or injury) or replace the advice of a medical professional. Sony Mobile disclaims any warranty that this device could be used or suitable for medical purposes. Seek medical advice before undertaking a new or altered training regime using this device, particularly if using this device together with a pacemaker or other medical devices.

Prior to use, please read the Important information leaflet separately provided.

This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide. All rights reserved. 2015 Sony Mobile Communications Inc. Interoperability and compatibility among Bluetooth devices varies. Device generally supports products utilising Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile. Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All rights reserved. All product and company names mentioned herein are the trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners. Visit www.sonymobile.com for more information. All illustrations are for illustration only and may not accurately depict the actual accessory.

14

This is an Internet version of this publication. Print only for private use.

Declaration of Conformity for SWR12

Hereby, Sony Mobile declares that the equipment type RD-0071 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.compliance.sony.de/

Sony Mobile , RD-0071 ; 2014/53/EC. : http:// www.compliance.sony.de/

Sony Mobile ovime izjavljuje da je radijska oprema tipa RD-0071 u skladu s Direktivom; 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: http://www.compliance.sony.de/

Sony Mobile tmto prohlauje, e radiov zazen typ RD-0071 je v souladu se smrnic; 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: http://www.compliance.sony.de/

Hermed erklarer Sony Mobile, at radioudstyrstypen RD-0071 er i overensstemmelse med direktiv; 2014/53/EU. EU-overensstemmelseserklaringens fulde tekst kan findes pa folgende internetadresse: http:// www.compliance.sony.de/

Hierbij verklaart Sony Mobile dat het type radioapparatuur RD-0071 conform is met Richtlijn; 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: http:// www.compliance.sony.de/

Kesolevaga deklareerib Sony Mobile, et kesolev raadioseadme tp RD-0071 vastab direktiivi; 2014/53/EL nouetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: http://www.compliance.sony.de/

Sony Mobile vakuuttaa, ett radiolaitetyyppi RD-0071 on direktiivin; 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: http://www.compliance.sony.de/

Le soussign, Sony Mobile, dclare que lquipement radiolectrique du type RD-0071 est conforme a la directive; 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible a ladresse internet suivante: http:// www.compliance.sony.de/

Hiermit erklrt Sony Mobile, dass der Funkanlagentyp RD-0071 der Richtlinie; 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: http://www.compliance.sony.de/

Sony Mobile, RD-0071 ; 2014/53/EE. : http:// www.compliance.sony.de/

Sony Mobile igazolja, hogy a RD-0071 tpus rdiberendezs megfelel a; 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: http://www.compliance.sony.de/

Il fabbricante, Sony Mobile, dichiara che il tipo di apparecchiatura radio RD-0071 e conforme alla direttiva; 2014/53/EU. Il testo completo della dichiarazione di conformita UE e disponibile al seguente indirizzo Internet: http:// www.compliance.sony.de/

Ar o Sony Mobile deklar, ka radioiekrta RD-0071 atbilst Direktvai; 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams d interneta vietn: http:// www.compliance.sony.de/

Mes, Sony Mobile, patvirtiname, kad radijo rengini tipas RD-0071 atitinka Direktyv; 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas iuo interneto adresu: http://www.compliance.sony.de/

15

This is an Internet version of this publication. Print only for private use.

Il-Kumpanija Sony Mobile tiddikjara li t-tagmir tar-radju tat tip RD-0071 huwa konformi mad-Direttiva; 2014/53/EU. It-test si tad-dikjarazzjoni ta konformita tal-UE huwa disponibbli fdan l-indirizz tal-Internet li ej: http:// www.compliance.sony.de/

Herved erklarer Sony Mobile at radioutstyr typen RD-0071 er i samsvar med direktiv; 2014/53/EU. EU-erklaring fulltekst finner du pa Internett under: http:// www.compliance.sony.de/

Sony Mobile niniejszym owiadcza, e typ urzdzenia radiowego RD-0071 jest zgodny z dyrektyw; 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: http:// www.compliance.sony.de/

O(a) abaixo assinado(a) Sony Mobile declara que o presente tipo de equipamento de rdio RD-0071 est em conformidade com a Diretiva; 2014/53/UE. O texto integral da declaraao de conformidade est disponvel no seguinte endereo de Internet: http://www.compliance.sony.de/

Prin prezenta, Sony Mobile declar c tipul de echipament radio RD-0071 este n conformitate cu Directiva; 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: http:// www.compliance.sony.de/

Sony Mobile potrjuje, da je tip radijske opreme RD-0071 skladen z Direktivo; 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: http://www.compliance.sony.de/

Sony Mobile tmto vyhlasuje, e rdiov zariadenie typu RD-0071 je v slade so smernicou; 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: http://www.compliance.sony.de/

Por la presente, Sony Mobile declara que el tipo de equipo radioelctrico RD-0071 es conforme con la Directiva; 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente: http:// www.compliance.sony.de/

Hrmed frskrar Sony Mobile att denna typ av radioutrustning RD-0071 verensstmmer med direktiv; 2014/53/EU. Den fullstndiga texten till EU- frskran om verensstmmelse finns pa fljande webbadress: http:// www.compliance.sony.de/

Bu belgeyle, Sony Mobile Communications Inc., RD-0071 tipi telsiz cihaznn 2014/53/EU sayl Direktife uygun olduunu beyan etmektedir. AB Uygunluk beyannn tum metnine u internet adresinden ulalabilir: http:// www.compliance.sony.de/

FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

AVISO IMPORTANTE PARA MXICO La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada.

16

This is an Internet version of this publication. Print only for private use.

Para consultar la informacin relacionada al nmero del certicado, rerase a la etiqueta del empaque y/o del producto. Alimentacin: 3,7 Vcc

Industry Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Avis dindustrie Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence

Manualsnet FAQs

If you want to find out how the SWR12 Sony works, you can view and download the Sony SWR12 v2 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Sony SWR12 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Sony SWR12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony SWR12 v2 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony SWR12 v2 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony SWR12 v2 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony SWR12 v2 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony SWR12 v2 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.