Summary of Content for Sony VGF-HS1 Quick Start Guide PDF
2008 Sony Corporation / Printed in Japan4-121-976-01(1)
Network (LAN) cable (straight- through Ethernet cable, 2 m)
Quick Start Guide (this document)
Warranty sheet or Guarantee and Service Support booklet (depending on the country or region of residency)
CD-ROM disc Software
PC Link VAIO Media
Contents Sample contents (also stored on your Home Server at the time of delivery)
1 COPY indicator light Indicates the state of a USB device or a memory card and the status of data imported from the device or card.
2 NETSERVER indicator light Indicates the server test status or the state of the Home Server.
3 1 (POWER) indicator light Indicates the state of the power supply or the state of the Home Server.
4 1 (POWER) button Press this button to turn on and off the Home Server.
5 INFO indicator light Indicates the state of the Home Server.
6 HDD indicator light Indicates the remaining capacity or the state of the hard disk drive.
7 CONNECT button Press this button to obtain a permission code for adding a Data Sync (receiving) profile.
8 COPY button Press this button to import data from a USB device or a memory card.
9 SD (SD memory card) slot Insert an SD memory card.
q; (USB) port Connect a USB mass storage class device, such as a digital still camera or a digital camcorder. This port is also labeled as Front USB on the Home Server Settings Page.
qa Display Displays information on the Home Server.
qs DISPLAY button Press this button to turn on the display on the Home Server and select the required information.
qd Memory Stick slot Insert a Memory Stick media. This slot can also accommodate the Duo-type media without an adapter.
qf OK button Press this button to confirm the information displayed on the display.
qg CANCEL button Press this button to cancel the on- going operation. You can also press and hold this button for 10 seconds to clear the administrator registration and the IP address settings.
qh MEMORY CARD access indicator light Blinks while access to the memory card is in progress.
qj CF (CompactFlash) slot
qk CF (CompactFlash) media eject button
ql Front door To open the front door, put your fingertip on the left end of the door and slide it half way to the right. To close the door, slide it half way to the left.
w; ID label Shows the model name of the Home Server.
1 Air vents
2 DC IN port Connect to the AC adapter.
3 Network (LAN) port Connect a network (LAN) cable.
Be sure not to connect any unsupported networks or any telephone lines to the Network port.
4 (USB) port 1 Connect a USB mass storage class device, such as a digital still camera or a digital camcorder. This port is also labeled as Rear USB1 on the Home Server Settings Page.
Getting to know your VGF-HS1 Home Server The information provided here is designed to help you become familiar with your Home Server.
Some of the above products may not be available, depending on the country or region of residency.
5 (USB) port 2 Connect a USB mass storage class device, such as a digital still camera or a digital camcorder. This port is also labeled as Rear USB2 on the Home Server Settings Page.
1 Connect the supplied network (LAN) cable to the network (LAN) port on the back of your Home Server.
2 Connect your Home Server to a power outlet with the supplied AC adapter.
z Tip Please refer to the Setup Guide for detailed instructions on connecting to a network.
3 Attach the rear cover.
Turning on your Home Server
1 Press the 1 (POWER) button for about 2 seconds until the 1 (POWER) indicator light blinks in orange. When the Home Server is completely turned on, the power indicator light stops blinking and turns green.
Turning off your Home Server
1 Press the 1 (POWER) button for about 2 seconds until the 1 (POWER) indicator light blinks in green.
z Tip Your Home Server is designed to be always on and has power saving features to reduce energy use when no being accessed.
1 Insert the supplied CD-ROM disc into the optical disc drive of your computer.
2 The License Agreement is displayed, read the terms and conditions, select I accept the terms of the license agreement, and click Next. The software setup window appears.
3 Click PC Link 1 and then Install 2.
4 Click Next on the InstallShield Wizard.
5 Click Finish upon completion of the software installation.
6 Click Next when the PC Link software starts.
7 Select a Home Server and click Next.
8 Select your desired folder(s).
z Tip If the above window does not appear, please refer to When your Home Server has a global IP address (page 47) in the Setup Guide.
9 Finish the setup.
When you click Close, the PC Link software will begin to upload the selected folders.
The PC Link software provides you with easy ways to keep your folder content updated (data synchronization) between your personal computer and your Home Server.
1 (POWER) button / 1 (POWER) indicator light
Router To the network (LAN) port
4 To an AC outlet
Power cord (supplied)
If you want to find out how the VGF-HS1 Sony works, you can view and download the Sony VGF-HS1 Quick Start Guide on the Manualsnet website.
Yes, we have the Quick Start Guide for Sony VGF-HS1 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Start Guide should include all the details that are needed to use a Sony VGF-HS1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Sony VGF-HS1 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Sony VGF-HS1 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Sony VGF-HS1 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Sony VGF-HS1 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony VGF-HS1 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.