Sony RM-DR1 Operating Instructions PDF

Sony RM-DR1 Operating Instructions PDF
Pages 2
Year 2001
Language(s)
Arabic ar
German de
English en
French fr
Italian it
Japanese ja
Korean ko
Russian ru
Swedish sv
Spanish sp
Chinese zh
Dutch; Flemish nl
Portuguese pt
1 of 2
1 of 2

Summary of Content for Sony RM-DR1 Operating Instructions PDF

3-071-929-01 (1)

Sony Corporation 2001 Printed in Japan

RM-DR1

Remote Commander

Operating Instructions Mode demploi Bedienungsanleitung Manual de instrucciones Gebruiksaanwijzing Bruksanvisning Istruzioni per luso Manual de instrues

ACC

A

B

C

D

E

English

THIS CLASS B DIGITAL DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND THE CANADIAN ICES-003, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CET APPAREIL NUMRIQUE DE LA CLASSE B EST CONFORME LA NORME NMB-003 DU CANADA.

For the customers in Germany Directive: EMC directive 89/336/EEC, 92/31/EEC This equipment complies with EMC regulations when used under the following circumstances: Residential area Business district Light-industry district (This equipment complies with the EMC standard regulations EN55022 ClassB.) This product has been tested and found compliant with the limits sets out on the EMC Directive for using connection cables shorter than 3 meters.

The RM-DR1 Remote Commander is designed to operate a Sony digital still camera equipped with an ACC terminal. You can operate the camera remotely.

Notes Be sure not to drop the Remote Commander or spill

liquid on it. Do not leave the Remote Commander under direct

sunlight, near a heater or in locations with high humidity.

Identifying the parts A Shutter button/B Zoom lever/C POWER lamp/ D POWER switch/E Remote cord

Preparing the Digital Still Camera Set the camera to record images. Refer to the operation manual of the digital still camera for further information.

Connecting to the Digital Still Camera Connect the remote cord E of the Remote Commander to the ACC terminal of the Digital Still Camera.

Using the Remote Commander to record 1 Slide the POWER switch D down along the arrow mark to

turn on the camera. The POWER lamp C turns green light. 2 Press the shutter button A lightly to check the image.

The image is not recorded yet. 3 Press the shutter button A fully down. The image is recorded. 4 Slide the POWER switch D down along the arrow mark

to turn off the camera. The POWER lamp C turns off.

Using the zoom feature Slide the zoom lever B to either the W or T side. Sliding slowly zooms slowly and sliding faster zooms fast. T side (for telephoto): subject appears closer. W side (for wide-angle): subject appears farther away. * Some models do not have the zoom function.

Using the strap When using a tripod, you can hang the Remote Commander on the pan handle of the tripod when you are not using it.

Specifications Dimensions: 35 89 23 mm

(1 7/16 3 5/8 29/32 inches) (w/h/d) Remote cord: 1.5 m (4.9 feet) Mass: Approx. 60 g (2 oz) Accessories: Operating Instructions (1)/Strap (1)/Pouch (1) Refer to the operation manual of the digital still camera for further information as well.

Franais

THIS CLASS B DIGITAL DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND THE CANADIAN ICES-003, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CET APPAREIL NUMRIQUE DE LA CLASSE B EST CONFORME LA NORME NMB-003 DU CANADA.

Ce produit a t test et dclar conforme aux limites dfinies dans la directive CEM concernant lutilisation de cbles de connexion dont la longueur est infrieure 3 mtres.

La tlcommande RM-DR1 est conue pour commander un appareil photo numrique Sony quip dune borne ACC. Vous pouvez ainsi faire fonctionner lappareil photo distance. Remarques Faire attention de ne pas renverser de liquide sur la

tlcommande et de ne pas la faire tomber. Ne pas laisser la tlcommande dans un endroit expos

aux rayons directs du soleil, une forte humidit ou ct dun chauffage.

Identification des diffrents lments de la tlcommande A Bouton dclencheur/B Levier du zoom/C Tmoin POWER (alimentation)/D Interrupteur POWER (Marche/Arrt)/E Cordon de la tlcommande Prparation de lappareil photo numrique Rglez lappareil photo sur la fonction denregistrement dimages. Pour de plus amples informations, reportez- vous au mode demploi de lappareil photo numrique. Raccordement lappareil photo numrique Branchez le cordon E de la tlcommande sur une borne ACC de lappareil photo numrique. Utilisation de la tlcommande pour lenregistrement 1 Faites coulisser le interrupteur POWER D dans le rail

le long de la flche pour mettre lappareil photo en marche. Le tmoin POWER C sallume en vert.

2 Appuyez lgrement sur le bouton dclencheur A pour vrifier limage. Limage nest pas encore enregistre.

3 Appuyez fond sur le bouton dclencheur A. Limage est enregistre.

4 Faites coulisser le interrupteur POWER D dans le rail le long de la flche pour teindre lappareil photo. Le tmoin POWER C steint.

Utilisation de la fonction de zoom Faites coulisser le levier du zoom B vers lindication W ou T. Si vous faites coulisser lentement, le zoom est lent et si vous faites coulisser rapidement, le zoom est plus rapide. Vers le T (tlobjectif) : le sujet semble plus rapproch. Vers le W (grand angle) : le sujet semble plus loign. * Certains modles ne sont pas quips de la fonction de zoom. Utilisation de la courroie Lorsque vous ne vous servez pas du manche pour tte panoramique du trpied que vous tes en train dutiliser, vous pouvez y accrocher la tlcommande. Spcifications Dimensions : 35 89 23 mm

(1 7/16 3 5/8 29/32 pouces) (l/h/p) Cordon de la tlcommande : 1,5 m (4,9 pieds) Poids : Env. 60 g (2 on) Accessoires : Mode demploi (1)/Courroie (1)/Housse de

rangement (1) Pour de plus amples informations, reportez-vous galement au mode demploi de lappareil photo numrique.

Deutsch

Fr Kunden in Deutschland Richtlinie:EMV-Richtlinie 89/336/EWG.92/31/EWG Dieses Gert erfllt die europischen EMV- Bestimmungen fr die Verwendung in folgenden Umgebungen: Wohngegenden Gewerbegebiete Leichtindustriegebiete Das Gert erfllt die Bestimmungen der Norm EN55022, Klasse B. Dieses Produkt wurde getestet und hlt die Grenzwerte ein, die in der EMV-Richtlinie fr die Verwendung von Verbindungskabeln vorgeschrieben sind, die krzer als 3 Meter sind. Die Fernbedienung RM-DR1 kann zum Steuern einer digitalen Standbildkamera von Sony verwendet werden, die mit einem Anschlu ACC ausgestattet ist. So knnen Sie die Kamera fernsteuern.

Hinweise Lassen Sie die Fernbedienung nicht fallen, und

verschtten Sie keine Flssigkeiten darauf. Schtzen Sie die Fernbedienung vor direktem

Sonnenlicht, und lassen Sie sie nicht in der Nhe von Wrmequellen oder an Orten mit hoher Luftfeuchtigkeit.

Lage und Funktion der Teile und Bedienelemente A Auslser/B Zoom-Hebel/C Netzanzeige POWER/ D Schalter POWER/E Fernbedienungskabel

Vorbereiten der digitalen Standbildkamera Stellen Sie die Kamera zum Aufnehmen von Bildern ein. Weitere Informationen finden Sie in der Bedienungsanleitung zu der digitalen Standbildkamera.

Anschlieen an die digitale Standbildkamera Schlieen Sie das Fernbedienungskabel E der Fernbedienung an den Anschlu ACC der digitalen Standbildkamera an.

Starten der Aufnahme mit der Fernbedienung 1 Schieben Sie den Schalter POWER D entlang der

Pfeilmarkierung nach unten, um die Kamera einzuschalten. Die Netzanzeige POWER C leuchtet grn.

2 Drcken Sie leicht auf den Auflser A, um das Bild zu berprfen. Das Bild wird noch nicht aufgenommen.

3 Drcken Sie den Auslser A ganz nach unten. Das Bild wird aufgenommen.

4 Schieben Sie den Schalter POWER D entlang der Pfeilmarkierung nach unten, um die Kamera auszuschalten. Die Netzanzeige POWER C erlischt.

Der Zoom Schieben Sie den Zoom-Hebel B in Richtung W oder T. Wenn Sie den Hebel langsam verschieben, wird langsam gezoomt, wenn Sie ihn schneller verschieben, erfolgt der Zoom schnell. T (Telephoto): Motiv erscheint nher. W (Weitwinkel): Motiv erscheint weiter entfernt. * Nicht alle Modelle sind mit der Zoom-Funktion ausgestattet.

Der Riemen Wenn Sie ein Stativ verwenden und die Ferbedienung nicht bentigen, knnen Sie sie am Schwenkarm des Stativs befestigen.

Technische Daten Abmessungen: 35 89 23 mm (B/H/T) Fernbedienungskabel:

1,5 m Gewicht: ca. 60 g Zubehr: Bedienungsanleitung (1)/Riemen (1)/Beutel (1) Weitere Informationen finden Sie auch in der Bedienungsanleitung zu der digitalen Standbildkamera.

Espaol

Este producto se ha comprobado y cumple con los lmites expuestos en la Directiva EMC sobre el uso de cables de conexin de una longitud inferior a 3 metros.

El mando a distancia RM-DR1 se ha diseado para controlar una cmara digital fija Sony equipada con un terminal de ACC y hacer funcionar la cmara de manera remota.

Notas No deje caer el mando a distancia ni vierta lquido

encima del mismo. No exponga el mando a distancia a la luz solar directa.

No lo coloque cerca de fuentes de calor ni en lugares con mucha humedad.

Identificacin de las piezas A Botn del disparador B Palanca del zoom C Lmpara POWER (encendido) D Interruptor POWER (encendido) E Cable remoto

Preparacin de la cmara digital fija Prepare la cmara para grabar imgenes. Consulte el manual de instrucciones de la cmara digital fija para obtener ms informacin.

Conexin a la cmara digital fija Conecte el cable remoto E del mando a distancia al terminal de ACC de la cmara digital fija.

Utilizacin del mando a distancia para grabar 1 Para encender la cmara, deslice el interruptor POWER

(encendido) D hacia abajo como indica la marca de la flecha. La lmpara POWER (encendido) C se iluminar con una luz verde.

2 Pulse ligeramente el botn del disparador A para comprobar la imagen. La imagen todava no se habr grabado.

3 Pulse completamente el botn del disparador A hacia abajo. La imagen se habr grabado.

4 Para apagar la cmara, deslice el interruptor POWER (encendido) D hacia abajo como indica la marca de la flecha. La lmpara POWER (encendido) C se apagar.

Utilizacin de la funcin del zoom Deslice la palanca del zoom B hacia el lado W o el lado T. Si la desliza lentamente, la imagen se acercar o alejar lentamente y si la desliza ms deprisa, la imagen se acercar o alejar rpidamente. Lado T (para telefoto): la imagen aparece ms cerca. Lado W (para gran angular): la imagen aparece ms lejos. * Algunos modelos no disponen de la funcin de zoom.

Utilizacin del asa Si utiliza un trpode, puede colgar el mando a distancia del mango de panormica del trpode cuando no lo utilice.

Especificaciones Dimensiones: 35 89 23 mm (an/al/prf) Cable remoto: 1,5 m Peso: Aprox. 60 g Accesorios: Manual de instrucciones (1)/asa (1)/bolsa

(1)

Consulte el manual de instrucciones de la cmara digital fija para obtener ms informacin.

Nederlands

Dit apparaat is getest en er is geconstateerd dat het voldoet aan de limieten die zijn opgenomen in de EMC- richtlijn voor het gebruik van verbindingskabels die korter zijn dan 3 meter.

De RM-DR1 Remote Commander is ontworpen om een Sony digitale camera met ACC aansluiting te bedienen. Zo kan de camera vanop afstand worden bediend.

Opmerkingen Laat de Remote Commander niet vallen noch nat

worden. Laat de Remote Commander niet in de volle zon, bij een

verwarmingstoestel of op een zeer vochtige plaats liggen.

Onderdelen A Sluiterknop B Zoomschakelaar C POWER lampje D POWER schakelaar E Snoer

De Digital Still Camera gebruiksklaar maken Stel de camera in voor opname. Raadpleeg de gebruiksaanwijzing van de digitale camera voor meer informatie.

Aansluiting op de Digital Still Camera Sluit het snoer E van de Remote Commander aan op ACC op de Digital Still Camera.

Opnemen met de Remote Commander 1 Schuif de POWER schakelaar D omlaag in de richting

van het pijltje om de camera aan te schakelen. Het POWER lampje C wordt groen.

2 Druk de sluiterknop A lichtjes in om het beeld te controleren. Het beeld wordt nog niet opgenomen.

3 Druk de sluiterknop A helemaal in. Het beeld wordt opgenomen.

4 Schuif de POWER schakelaar D omlaag in de richting van het pijltje om de camera uit te schakelen. Het POWER lampje C dooft.

In- en uitzoomen Schuif de zoomschakelaar B naar W of T. Door traag te schuiven gaat het zoomen traag en door snel te schuiven gaat het zoomen snel. T-kant (telestand): onderwerp lijkt dichterbij. W-kant (groothoekstand): onderwerp lijkt verderaf. * Sommige modellen hebben geen zoomfunctie.

Gebruik van de lus Wanneer u met een statief werkt, kunt u de Remote Commander aan de zwenkhandle van het statief hangen wanneer u hem niet gebruikt.

Technische gegevens Afmetingen: 35 89 23 mm (b/h/d) Snoer: 1,5 m Gewicht: Ongeveer 60 g Toebehoren: Gebruiksaanwijzing (1)/Lus (1)/Tasje (1)

Raadpleeg ook de gebruiksaanwijzing van de digitale camera voor meer informatie.

ACC

A

B

C

D

E

Svenska

Produkten har provats och befunnits uppfylla kraven i EMC-reglerna fr anvndning med anslutningsledningar kortare n 3 meter.

Fjrrkontrollen RM-DR1 r avsedd fr Sonys digitala stillbildskamera, som r utrustad med en ACC-terminal. Med fjrrkontrollen kan du fjrrstyra kameran.

Obs! Se till att du inte tappar fjrrkontrollen eller spiller

vtska p den. Lmna inte fjrrkontrollen i direkt solljus, nra ett

vrmeelement eller p platser dr det r mycket fuktigt.

Fjrrkontrollens delar A Slutarknapp B Zoomreglage C POWER (strm), lampa D POWER (strm), omkopplare E Anslutningskabel

Frbereda den digitala stillbildskameran Stll in kameran fr att ta bilder. Mer information finns i kamerans bruksanvisning.

Ansluta till den digitala stillbildskameran Anslut fjrrkontrollkabeln E till ACC-terminal p den degitala stillbildskameran.

Anvnda fjrrkontrollen fr att ta bilder 1 Sl p kameran genom att skjuta POWER-

omkopplaren D nedt lngs pilmarkeringen. POWER- lampan C tnds och lyser grnt.

2 Tryck frst ned slutarknappen A helt ltt fr att kontrollera bilden. Bilden har nnu inte tagits.

3 Tryck sedan ned slutarknappen A helt och hllet. D lagras bilden.

4 Stng av kameran genom att skjuta POWER- omkopplaren D nedt lngs pilmarkeringen. POWER- lampan C slocknar.

Anvnda zoomfunktionen Skjut zoomreglaget B mot antingen W eller T. Nr du skjuter reglaget lngsamt utfrs zoomningen lngsamt, nr du skjuter den snabbare utfrs zoomningen snabbare. T-sida (tele): motivet verkar ligga nrmare. W-sida (vidvinkel): motivet verkar ligga lngre bort. * Vissa modeller saknar zoomfunktion.

Brremmen Nr du anvnder stativ kan du hnga fjrrkontrollen p stativets panoreringshantag nr du inte anvnder den.

Specifikationer Dimensioner: 35 89 23 mm (b/h/d) Anslutningskabel:

1,5 m Vikt: Cirka 60 g Tillbehr: Bruksanvisning (1)/Rem (1)/Brvska (1)

Mer information finns i bruksanvisningen till den digitala stillbildskameran.

Italiano

A seguito di specifici collaudi, questo prodotto risultato conforme alle limitazioni stabilite dalla Direttiva EMC relativa allutilizzo di cavi di collegamento di lunghezza inferiore a 3 metri.

Il telecomando RM-DR1 stato progettato per il controllo di una macchina fotografica ferma digitale Sony dotata di terminale ACC. possibile controllare la macchina fotografica a distanza.

Note Assicurarsi di non fare cadere il telecomando n di bagnarlo. Non conservare il telecomando in luoghi soggetti a luce

solare diretta, in prossimit di fonti di calore o in luoghi soggetti a umidit eccessiva.

Identificazione delle parti A Tasto dellotturatore/B Leva dello zoom/C Spia POWER/D Interruttore POWER/E Cavo del telecomando

Preparazione della macchina fotografica ferma digitale Impostare la macchina fotografica sul modo di registrazione delle immagini. Per ulteriori informazioni, fare riferimento al manuale delle istruzioni della macchina fotografica ferma digitale.

Collegamento alla macchina fotografica ferma digitale Collegare il cavo del telecomando E al terminale ACC della macchina fotografica ferma degitale.

Uso del telecomando per le registrazioni 1 Premere linterruttore POWER D facendolo scorrere in

direzione della freccia per accendere la macchina fotografica. Il colore della spia POWER C diventa verde.

2 Premere leggermente il tasto dellotturatore A per controllare limmagine. Limmagine non viene ancora registrata.

3 Premere a fondo il tasto dellotturatore A. Limmagine viene registrata.

4 Premere linterruttore POWER D facendolo scorrere in direzione della freccia per spegnere la macchina fotografica. La spia POWER C viene disattivata.

Uso della funzione di zoom Spostare la leva dello zoom B in direzione del lato W o T. Spostandola lentamente, lingrandimento viene effettuato gradualmente, mentre spostandola pi rapidamente, lingrandimento viene effettuato in un tempo ridotto. Lato T (per teleobiettivo): il soggetto viene visualizzato pi da vicino. Lato W (per grandangolo): il soggetto viene visualizzato in lontananza. * Alcuni modelli non sono dotati della funzione di zoom.

Uso della cinghia Se viene utilizzato un treppiede, possibile appendere il telecomando alla maniglia di panoramica del treppiede, nel caso in cui non sia necessario utilizzarlo.

Caratterisitiche tecniche Dimensioni: 35 89 23 mm (l/a/p) Cavo del telecomando:

1,5 m Peso: Circa 60 g Accessori: Istruzioni per luso (1)/Cinghia (1)/

Custodia (1)

Per ulteriori informazioni, fare inoltre riferimento al manuale delle istruzioni della macchina fotografica ferma digitale.

Portugus

Este produto foi testado e est em conformidade com os limites definidos na Directiva EMC para utilizao de cabos de ligao com menos de 3 metros.

O telecomando RM-DR1 destina-se a ser utilizado com uma cmara digital da Sony equipada com um terminal ACC. Pode comandar a cmara remotamente.

Notas No deixe cair o telecomando nem o molhe. No deixe o telecomando exposto luz solar directa,

junto de um aquecedor ou em locais muito hmidos.

Identificar as peas A Boto do obturador B Boto de zoom C Indicador luminoso POWER D Selector POWER E Cabo do telecomando

Preparar a cmara digital Prepare a cmara para gravar imagens. Para obter mais informaes, consulte o manual de instrues da cmara.

Fazer as ligaes cmara digital Ligue o cabo remoto E do telecomando ao terminal ACC da cmara digital.

Utilizar o telecomando para gravar 1 Para ligar a cmara, empurre o selector POWER D na

direco indicada pela seta. O indicador luminoso de POWER C acende-se com uma luz verde.

2 Carregue ligeiramente no boto A do obturador para verificar a imagem. A gravao da imagem ainda no efectuada.

3 Carregue no boto A do obturador at abaixo. A imagem gravada.

4 Para desligar a cmara, empurre o selector POWER D na direco indicada pela seta. O indicador luminoso POWER C apaga-se.

Utilizar a funo de zoom Empurre o boto de zoom B para o lado W ou T. Se empurrar devagar executa o zoom lentamente, se o empurrar mais depressa executa o zoom rapidamente. Lado T (para teleobjectiva): o motivo aparece mais perto. Lado W (para grande-angular): o motivo aparece mais afastado. * Alguns modelos no tm a funo de zoom.

Utilizar a correia Quando utilizar um trip, pode pendurar o telecomando no manpulo de panormica do trip, quando no estiver a utiliz-lo.

Caractersticas tcnicas Dimenses: 35 89 23 mm (l/a/p) Cabo remoto: 1,5 m Peso: Aprox. 60 g Acessrios: Manual de instrues (1)/Correia (1)/Bolsa

(1)

Para obter mais informaes, consulte tambm o manual de instrues da cmara digital.

Pycc

ae ee p ca cecye peea, ycae pee EMC e ceex aee, a px e peae 3 ep.

y ca ypae RM-DR1 peaae ypae p aep Sony, cae pae ACC. aep ypa a pacc.

pea He pe y ca ypae e

pae a e ax ce. He cae y ca ypae

ecax, ya aa pe cee y, p c peaee ecax c e ac.

Oaee ace A a apa/B Pa pa pacapa/ C ap POWER/D epeae POWER/ E ae ya ca ypae

a p aep Hacpe aepy ac pae. ey pa c. pyce cyaa p aep.

ee p aepe E .

cae ya ca ypae ac 1 epee epeae POWER D

cpee, aepy. ap POWER C apc ee e.

2 Cea ae y apa A, pep paee. paee a ee e acaec.

3 c ae y apa A. paee aec.

4 epee epeae POWER D cpee, aepy. ap POWER C ace.

cae y paca epeece pa pa pacapa B cpy W T. p ee epeee paca ec ee, p cp - cpee. Cpa T (ee): e paec. Cpa W (pya): e yaec. * Hepe e e e y pacapa.

cae peea p ca aa y ca ypae ec a pyy aa, a e cyec.

Texece xapaepc Paep: 35 89 23 (//) ae ya ca ypae:

1,5 Macca: p. 60 ee paec:

cpy cyaa (1)/ Pee (1)/yp (1)

ey pa c. ae pyce cyaa p aep.

3m

EMC -

RM-DR1 ACC Sony

--

-

-

A

B

C POWER

D POWER

E

-

-

E ACC -

1 POWER D -

POWER C -

2 A --

3 A--

4 POWER D -

POWER C -

B W T -

-

T -

W -

* -

-

35 89 23 mm 1.5 m

60 g

111

-

3 EMC . RM-DR1 ACC . .

. ,

.

A B C POWER D POWER E

. .

E ACC .

1 POWER D

. POWER C .

2 A . .

3 A . .

4 POWER D . POWER C .

B W T . . T(): . W(): . * .

Manualsnet FAQs

If you want to find out how the RM-DR1 Sony works, you can view and download the Sony RM-DR1 Operating Instructions on the Manualsnet website.

Yes, we have the Operating Instructions for Sony RM-DR1 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operating Instructions should include all the details that are needed to use a Sony RM-DR1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony RM-DR1 Operating Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony RM-DR1 Operating Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony RM-DR1 Operating Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony RM-DR1 Operating Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony RM-DR1 Operating Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.