Summary of Content for Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual PDF
Blu-ray Disc Remote Control Instruction Manual
Precautions Before using this product, carefully read this manual and retain it for future reference. Read also the instructions for the PlayStation3 system.
Battery use Do not handle damaged or leaking batteries. Never throw batteries into a fire. If you come into contact with material from a leaking battery, take the following actions:
If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.
If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your physician if inflammation or soreness develops.
Keep the product out of the reach of small children. Small children may swallow the batteries or small parts, which may inflict injury or cause an accident.
Do not use batteries other than those specified, and always replace with the same type of battery. Do not mix old and new batteries.
Insert batteries with the plus and minus ends in the correct direction. Remove batteries when they have reached the end of their life, or if the BD remote control is to be stored for an extended period of time.
Use and handling Do not expose the BD remote control to high temperatures, high humidity or direct sunlight. Do not allow liquid or small particles to get into the product. Do not put heavy objects on the product. Never disassemble or modify the product. Do not throw or drop the product, or otherwise expose it to strong physical impact. Do not place any rubber or vinyl materials on the product exterior for an extended period of time. When cleaning the product, use a soft, dry cloth. Do not use solvents or other chemicals.
What you can do with the BD remote control The BD remote control uses Bluetooth wireless technology to operate your PS3 system and to control the playback of common types of disc media, including Blu-ray Disc (BD) media.
You can also control the playback of streaming media and control the playback of content downloaded to the PS3 system HDD.
Infrared (IR) technology enables you to operate peripheral devices such as your television and AV amplifier*. For IR operation you must point the IR transmitter of the BD remote control directly at the device. Check that there are no obstructions between the BD remote control and the device.
PlayStation3 system Television AV amplifier
Bluetooth wireless communication
IR (infrared) communication
BD remote control
* Only the surround sound system (CECH-ZVS1A / CECH-ZVS1B / CECH-ZVS1E) (sold separately) and AV amplifiers made by Sony Corporation can be used.
Preparing for use Remove the battery cover on the rear of the BD remote control and insert the supplied batteries. Set the batteries in the correct position.
Operating the PS3 system Check the PS3 system software version To use the BD remote control, the PS3 system software must be version 3.60 or later. You can check the system software version by selecting (Settings) (System Settings) [System Information] on the XMB (XrossMediaBar) menu of the PS3 system.
Registering (pairing) the BD remote control with a PS3 system This operation is performed only once, when you are using the BD remote control for the first time. 1 Turn on the PS3 system.
2 From the PS3 systems XMB menu, select (Settings) (Accessory Settings) [Register BD Remote Control], and then press the button.
3 Follow the on-screen instructions to register the BD remote control.
Hints For the latest usage instructions, refer to the users guide for the PS3 system (eu.playstation.com/manuals).
Only one BD remote control can be registered with a PS3 system at a time. When you pair the BD remote control with another PS3 system, registration with the original PS3 system is cleared. To use the BD remote control with the original PS3 system, you will have to pair the devices again.
How to use the BD remote control DEVICES buttons Switch between devices.
PS3 system button Switch the BD remote control to operate the PS3 system.
AMP button Switch the BD remote control to operate an AV amplifier.
TV button Switch the BD remote control to operate a TV.
Buttons for operating a PS3 system, a TV or an AV amplifier The meaning of the icons shown in the table below is as follows.
Used to operate the PS3 system.
Used to operate the TV.
Used to operate the AV amplifier.
INPUT button* Switch the video inputs in TVs and the audio inputs in AV amplifiers.
/ AMP button Turn the AV amplifier on and off.
/ TV button Turn the TV on and off.
3D button Switch between 2D and 3D mode on the TV. Operation will differ depending on the TV.
Number buttons Enter numbers.
/CLEAR button Clear numbers that have been entered. Enter the decimal point for a digital broadcast subchannel.
TIME button View the elapsed time or remaining time of a title or chapter. Confirm the channel number that has been entered.
-/- - button Enter channels of 2 digits or greater. AUDIO button Change audio. SUBTITLE button Switch subtitle languages. ANGLE button Change viewing angles on BDs with multiple angles
recorded for the same scene. Switch to view in wide mode.
DISPLAY button Display the status of and information about the content being played.
Change the display window settings. TOP MENU button Display the menu.
POP UP/MENU button Display the pop-up menu or the menu. RETURN button Go back to the previous display. Colour buttons Perform functions assigned to each button.
Assigned functions vary depending on the content being played.
Directional buttons Select item. ENTER button Confirms the choice or selection.
Performs the same operation as pressing the button on the DUALSHOCK3 wireless controller (sold separately).
MUTE button* Turn off the sound. VOL +/ button* Adjust the sound level. CH +/ button Change channels.
When operating the AV amplifier, changes the sound field.
* You do not need to press a DEVICES button to control the TV or AV amplifier when using the PS3 system.
Buttons for controlling the PS3 system These buttons cannot be used for operating a TV or an AV amplifier.
EJECT button Eject the disc.
button operations (refer to diagram )
The buttons perform the same operations as those of a wireless controller.
PLAY button Start playback.
PAUSE button Stop playback temporarily.
STOP button Stop playback.
PREV, NEXT buttons
Go to the previous or next chapter.
INSTANT, INSTANT buttons
Go back or go forward 15 seconds. The number of seconds may vary depending on the application.
SCAN, SCAN buttons
Fast forward and fast reverse playback. Playback speed changes each time you press the button.
/ SLOW/STEP, / SLOW/STEP buttons
Play content one frame at a time. If you press and hold down the button, content plays in slow motion.
Hints Depending on the product being operated, the BD remote control may not control some features. Some buttons may not function, or some buttons may function differently than indicated.
Some content may have preset playback conditions set by the content developer. In this case, some remote control button operations may not be available.
To turn on the PS3 system using the BD remote control, press the PS3 system button and then press any button used to operate the PS3 system.
If the battery charge is low When the battery charge is low, the remote control may not operate properly or the distance within which you can operate the remote control may be reduced. In this case, replace both batteries with new ones.
Operating a TV or AV amplifier You can use the BD remote control to operate a TV or an AV amplifier. Set the remote code to match the product in use. For TV brands other than Sony, you must first set the remote code (refer to the lists below). At the time of purchase, the BD remote control is set for use with Sony TVs and AV amplifiers. 1 Press the CLEAR button while pressing and holding down a DEVICES button.
Press either the TV button for a TV or the AMP button for an AV amplifier.
2 Enter the 3 digit remote code while the DEVICES button is flashing. Try each code in order and select a code that allows you to operate the TV or the AV amplifier with the BD remote control.
3 Press the ENTER button. After the TV or AV amplifier remote code is set, the DEVICES button will light. Check that you can operate the TV or the amplifier using the remote control.
Setting the remote code for a TV that is not in the list of manufacturers For TVs that are not on the list, you can manually enter the remote code so that you can operate the TV using the BD remote control. 1 Press the CLEAR button while pressing and holding down the / TV button.
The TV button will flash.
2 Press the CH + button and the / TV button on the BD remote control one after the other. Repeat this until you can operate the TV. Pressing the CH + button will increase the number, and the CH button will decrease the number.
3 Press the ENTER button. After the TV remote code is set, the TV button will light up. Check that you can operate the TV using the remote control.
If the number was not set During step 3, if the DEVICES button flashes five times in quick succession or if you cannot operate the TV or the AV amplifier after entering the code, try again (starting from step 1) using a different code.
Restoring the settings to their default values You can clear all custom settings and restore the settings to their default values. 1 Press and hold the following buttons in the order shown: MUTE button /CLEAR
button ENTER button All of the DEVICES buttons will light and the settings will be restored to their default values.
Power source Size AAA batteries (2)
External dimensions Approx. 50.0 230.0 19.5 mm (w h d)
Operating temperature 5C - 35C
Design and specifications are subject to change without notice.
GUARANTEE This product is covered for 12 months from date of purchase by the manufacturers warranty set out in the PS3 system manual. Please refer to the PS3 system manual for full details.
The manufacturer of this product is Sony Computer Entertainment Inc., 1-7-1 Konan, Minato-ku, Tokyo 108-0075 Japan. The Authorised Representative for EMC and product safety in Europe is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP, United Kingdom.
This product may fall within the scope of national export control legislation. You must comply fully with the requirements of such legislation and of all other applicable laws of any jurisdiction in relation to this product.
List of TV manufacturer numbers
Manufacturer Remote Code SONY 401, 402, 403, 404, 405, 406, 407, 408, 409, 410,
411, 412, 413, 414, 415, 416, 417 A AKAI 456 AIWA 443, 444 Audiosonic 561 B B&O 553 Blaupunkt 551 Brionvega 536, 537 BUSH 542, 543 C Crown 457, 458 D Daewoo 473, 474, 475, 476 Dual 552 E Emerson 505 F Fenner 538, 539 Ferguson 529, 530 G Goldstar 472 Goodmans 540, 541 Grundig 517, 518, 519, 520, 521 H Hansol 559 Hitachi 427, 428, 429, 430, 431 Hoher 549 Hyper 556 I Inno-Hit 449 Irradio 554 J JVC 436, 437, 438 K Kendo 455 L Lenco 547 LG 469, 470, 471 LOEWE 544, 545 Luxor 555 M Mark 557 Matsui 450, 451, 452, 453, 454 Mitsubishi 432, 433, 434, 435 Mivar 522, 523 N NEC 446 Nokia 509, 510, 511, 512, 513, 514 Nordmende 531, 532, 533 O Oceanic 514 Okano 450 ORION 447, 448 P Panasonic 418, 419, 420, 421, 422
Manufacturer Remote Code Philips 501, 502, 503, 504, 505, 506, 507, 508 Pioneer 445 R Roadstar 426, 560 S SABA 526, 527, 528 SAMSUNG 459, 460, 461, 462, 463, 464, 465, 466, 467, 468 Sanyo 439, 440 Schneider 546, 547, 548 Seleco 524, 525 SEG 505, 547 Sharp 441, 442 T Telfunken 526, 534, 535 Thomson 515, 516 Toshiba 423, 424, 425, 426 U UNITED 549, 550 V VIETA 558
List of AV amplifier setting numbers
Manufacturer Remote Code
SONY 601, 602, 603
, PlayStation, , and DUALSHOCK are registered trademarks of Sony Computer Entertainment Inc.
XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
SONY and are registered trademarks of Sony Corporation.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Computer Entertainment Inc. is under license. Other trademarks and trade names are those of their respective owners.
Blu-ray Disc and Blu-ray are trademarks of the Blu-ray Disc Association.
2012 Sony Computer Entertainment Europe. All rights reserved.
Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure th
If you want to find out how the PlayStation 3 Sony works, you can view and download the Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual on the Manualsnet website.
Yes, we have the Instruction Manual for Sony PlayStation 3 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Instruction Manual should include all the details that are needed to use a Sony PlayStation 3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony PlayStation 3 PS3 CECH-ZRC1E Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.