Sony BDP-CX7000ES Operating Instructions PDF

2009 Sony Corporation Printed in Malaysia

4-148-374-15(1)

4-148-374-15(1)

BDP-CX7000ES

Blu-ray Disc / DVD Player

Operating Instructions

Mode demploi

US

FR

2U

S

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.

To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

Do not install the appliance in a confined space, such as a bookcase or build-in cabinet.

Do not expose batteries or apparatus with battery installed to excessive heat such as sunshine, fire or the like.

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage

within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near

water. 6) Clean only with dry cloth. 7) Do not block any ventilation

openings. Install in accordance with the manufacturers instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/ accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Owners Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. BDP-CX7000ES Serial No.______________

CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

This label is located on the laser protective housing inside the enclosure.

For customers in the USA The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

US

US

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the

receiving antenna. Increase the separation between

the equipment and receiver. Connect the equipment into an

outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

If you have any questions about this product, you may call; Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/

For Customers in Canada This Class B digital apparatus complies with Canadian ICES- 003.

If this product is not working properly, please call 1-877-602- 2008 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6

Precautions To avoid electrical shock, do not

open the cabinet. Refer servicing to qualified personnel only.

Keep the external memory away from children. If swallowed, promptly see a doctor.

Precautions On safety To prevent fire or shock

hazard, do not place objects filled with liquids, such as vases, on the player, or place the player near water, such as near a bathtub or shower room. Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

Do not touch the AC power cord with wet hands. Doing so may cause an electric shock.

On placement Place the player in a location

with adequate ventilation to prevent heat build-up in the player.

Do not place the player on a soft surface such as a rug that might block the ventilation holes.

Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

Keep the player and the discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

Do not place heavy or unstable objects on the player.

Do not install the player in an inclined position. It is designed to be operated in a horizontal position only.

Do not place any objects other than discs on the disc tray. Doing so may cause damage to the player or the object.

When you move the player, take out any discs. If you dont, the disc may be damaged.

When you move the player, disconnect the AC power cord and all other cables from the player.

On transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms to their original positions. 1) Remove all the discs from the

disc slots. 2) Press OPEN/CLOSE to close

the front cover. Make sure that NO DISC appears on the front panel display.

3) Wait for 10 seconds, then press [/1 to turn off the player. The player enters standby mode.

4) Disconnect the AC power cord.

On power sources If you are not going to use the

player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

,continued

3

4U

S

Observe following points to prevent the AC power cord being damaged. Do not use the AC power cord if it is damaged, as doing so may result in an electric shock or fire. Do not pinch the AC power

cord between the player and wall, shelf, etc.

Do not put anything heavy on the AC power cord or pull on the AC power cord itself.

On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/ lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

On replacement of parts In the events that this player is repaired, repaired parts may be collected for reuse or recycling purposes.

Do not use the following discs. A disc with a label or sticker

on it.

A disc that has cellophane tape or sticker adhesive on it.

A disc that has a non- standard shape (e.g., card, heart).

8 cm (3-inch) disc adaptor. The player cannot play an 8 cm disc. Do not insert an 8 cm (3-inch) disc or an 8 cm (3-inch) disc adaptor. It may damage the player and disc.

A lens cleaning disc. If you have printed the discs

label, dry the label before playing.

If burrs or adhesive material attach on the disc, the player may work unstably. In order to ensure stable operation, insert a disc after removing burrs or foreign objects. Burrs may be removed by rubbing the edge of the disc with the side of a pen or pencil. If a disc does not play, check for burrs on the disc and its two adjacent discs.

Do not insert discs other than those described in Playable Discs (page 86). Inserting a disc in a format not compatible may cause a malfunction.

To ensure stable operation To keep the disc clean, handle

the disc by its edge. Do not touch the surface. Be careful not to leave fingerprints especially on Blu- ray Discs. Dust, fingerprints, or scratches on the disc may cause it to malfunction.

Clean the disc with a cleaning cloth. Wipe the disc from the center out.

Do not resurface the playing side of a disc to remove surface scratches.

Do not use solvents such as benzine, thinner, commercially available disc/ lens cleaners, or anti-static spray intended for vinyl LPs.

Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

After removing a disc from the disc slot, store the disc in its case.

Notes about the discs

Tape or sticker

Adhesive material

Adaptor 8 cm disc

Burrs

Pen or pencil

Extra adhesive material

US

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc. 1996-2008 DTS, Inc. All Rights Reserved.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc.

, XMB, and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

This product incorporates High-Definition Multimedia Interface (HDMI) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Blu-ray Disc is a trademark. Blu-ray Disc, DVD+RW,

DVD-RW, DVD+R, DVD-R, DVD VIDEO, and CD logos are trademarks.

BD-Live and BonusView are trademarks of Blu-ray Disc Association.

x.v.Color and x.v.Color logo are trademarks of Sony Corporation.

BRAVIA is a trademark of Sony Corporation.

PhotoTV HD and the PhotoTV HD logo are trademarks of Sony Corporation.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

Music and video recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright 2000-present Gracenote. Gracenote Software, copyright 2000- present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non- exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

Other system and product names are generally trademarks or registered trademarks of the manufacturers. and marks are not indicated in this document.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

Copyrights and Trademarks

IMPORTANT NOTICE Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on- screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.

5

6U

S

About This Manual In this manual, disc is used

as a general reference for BDs, DVDs, or CDs unless otherwise specified by the text or illustrations.

Icons, such as , listed at the top of each explanation indicate what kind of media can be used with the function being explained. For details, see Playable Discs (page 86).

Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the similar symbols as those on the remote.

The on-screen display illustrations used in this manual may not match the graphics displayed on your TV screen.

NEED-to-know information (to prevent incorrect operation) is listed under the b icon. NICE-to-know information (tips and other useful information) is listed under the z icon.

BD

US

Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Guide to On-screen Menu Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Getting Started Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to an HDMI jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Connecting to component video jacks (Y/PB/PR) . . . . . . . . . . . . . . . . . 21 Connecting to an audio/video or S VIDEO jack . . . . . . . . . . . . . . . . . . . 22

Step 2: Connecting to Your AV Amplifier (Receiver) . . . . . . . . . . . . . . . . . . . 23 Connecting to an HDMI jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Connecting to digital jacks (OPTICAL/COAXIAL) . . . . . . . . . . . . . . . . . 25 Connecting to 7.1 channel jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Connecting to audio L/R jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Step 3: Inserting an External Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Step 4: Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

When connecting to a broadband router directly . . . . . . . . . . . . . . . . . . 29 When connecting via a wireless LAN router . . . . . . . . . . . . . . . . . . . . . 30

Step 5: Connecting the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Step 6: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Step 7: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Step 8: Inserting Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Inserting a rental disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Step 9: Loading Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Playback Playing BDs/DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Using the BDs or DVDs menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Enjoying BonusView/BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Searching for a scene quickly (Scene Search) . . . . . . . . . . . . . . . . . . . 40 Searching for a Title/Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Adjusting picture and sound for videos . . . . . . . . . . . . . . . . . . . . . . . . . 41

Playing Music CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Playing Music repeatedly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Playing Discs in random order (Shuffle Play) . . . . . . . . . . . . . . . . . . . . 46 Creating Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Playing Photo Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Playing a Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

,continued

7

8U

S

Organizing Discs Loading the Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Loading the information of all discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Loading a disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Editing a Disc/Title/File Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Editing the video disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Editing the music disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Editing the photo disc name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Entering characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

BRAVIA Sync Features About the BRAVIA Sync Features (HDMI connections only) . . . . . . . . . . . . 56

Remote Control Features Operating the Player and Other Components . . . . . . . . . . . . . . . . . . . . . . . . 58 Changing the Remote Code to Operate Other Components . . . . . . . . . . . . 60 Changing the Command Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Settings and Adjustments Using the Settings Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Network Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 BD/DVD Viewing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Photo Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Additional Information Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Self-Diagnosis Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Video Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Audio Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Parental Control/Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Terms and Conditions of Use and End User License Agreement . . . . . . . . . 92 Software License Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Before operating the player, please read Terms and Conditions of Use and End User License Agreement (page 92).

US

Guide to Parts and Controls For more information, see the pages in parentheses.

A [/1 (on/standby) (page 31) Turns on the player, or sets to standby mode.

B Remote sensor (page 31)

C Front panel display (page 10)

D N (play) (page 37) Starts playback.

X (pause) (page 37) Pauses playback.

x (stop) (page 37) Stops playback.

E DISC/AMS dial (page 34) Selects a disc in DISC CHANGE mode. Searches for a chapter/track/scene in DIRECT SEARCH mode. The selected mode indicator is lit in the front panel display.

F +100 (page 34) Skips 100 disc slots ahead when selecting discs.

DISC CHANGE Switches to the dial function for selecting the disc.

DIRECT SEARCH Switches to the dial function for searching for a chapter/track.

G OPEN/CLOSE (page 34) Opens or closes the front cover.

DISC EJECT (page 34) Opens the front cover and ejects the disc.

DISC LOAD (page 36) Reads the disc information of all unknown discs, and loads it into the memory.

RENTAL SLOT (page 35) Opens or closes the front cover to play a disc in slot number 1.

H Front cover Opens or closes when you insert or eject discs.

Front panel

,continued

9

10U

S

To lock the front cover (Child Lock) You can lock the front cover to prevent it being opened by mistake. When the player is turned on, hold down X on the player for more than 10 seconds until LOCKED appears in the front panel display. The front cover is locked.

To unlock the front cover, hold down X on the player until UNLOCK appears in the front panel display.

A File format Displays the format of the currently playing file.

B Disc type Displays the currently playing disc type.

C EXT (page 28) Lights up when the external memory is recognized.

HDMI (page 19) Lights up when an HDMI device is connected.

D HD (page 66) Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI OUT jack or 720p/1080i video signals from the COMPONENT VIDEO OUT jacks.

24P (page 67) Lights up when outputting 1080p/24 Hz video signals of BD-ROMs.

E Play mode Displays a currently playing play mode.

F DISC CHANGE/DIRECT SEARCH Displays either selected function mode for the dial.

G Disc slot number Displays the number of the disc slot currently selected or playing back.

H Playback information (page 13) Displays the disc/title/chapter/track number.

I N, X Lights up during playback or pause.

J Network connection indicator Lights up when downloading the players software. For details on downloading the players software, see page 64.

Front panel display

MP3 JPEG HDMI 24P PLAYLIST REPEAT 1 DIRECT SEARCH DISCDISC CHANGE

SECMINHOURTRACKCHAPTITLEDISC

SHUFFLEALL DISCSHDEXTBD DVD CD

1 2 3 4 765

89q;

US

A AUDIO OUT (L/R) jacks (page 22, 27)

B MULTI CHANNEL OUTPUT (FRONT L/R, SURROUND L/R, SUR BACK L/R, CENTER, SUB WOOFER) jacks (page 26)

C DIGITAL OUT (OPTICAL/ COAXIAL) jacks (page 25)

D LAN (100) terminal (page 29)

E VIDEO OUT (VIDEO / S VIDEO) jacks (page 22)

F EXT slot (page 28)

G COMPONENT VIDEO OUT (Y/PB/PR) jacks (page 21)

H HDMI OUT jack (page 19, 24)

I CONTROL S IN / IR IN jack If you have a CONTROL S-compatible Sony TV or AV amplifier (receiver), use a Control S cable (not supplied) to connect to the Control S (output) jack. Refer to the operating instructions supplied with your TV or AV amplifier (receiver).

J Ventilation holes The ventilation fan is inside the player.

K AC IN terminal (page 30)

L RS232C port Used for maintenance and service, or communication with external equipment.

Rear panel

,continued

11

12U

S

The number 5, AUDIO, TV CH +, and N PLAY buttons have a tactile dot. Use the tactile dot as a reference when operating the player.

Button functions differ depending on the mode selected by the OPERATION CHANGE buttons.

, , and indicate the functions available for each operation mode.

b The available functions of the remote differ depending on the disc or the situation.

A AV [/1 (on/standby) (page 59) Turns on the connected

TV or AV amplifier, or sets to standby mode.

[/1 (on/standby) (page 31) Turns on the player, or sets to

standby mode.

B OPERATION CHANGE (page 58) Changes the operation mode to control the component by the remote.

Operates the player. Operates a connected TV. Operates a connected AV

amplifier.

C Z OPEN/CLOSE (page 34) Opens or closes the front cover.

INPUT (input select) Switches between TV and

other input sources.

THEATER (page 56) Automatically switches to the

optimum video mode for watching movies.

b The THEATER button functions only when a Theater Mode-compatible TV is connected.

D Number buttons (page 39, 41, 60, 73, 74, 75)

Enters the title/chapter numbers, etc.

ENTER (page 39, 41, 60, 62) Enters a selected item.

CLEAR/ (dot) Clears the entry field. Inputs . (dot) when inputting

numerics.

E AUDIO (page 73)/FAVORITES Selects the language

when multi-lingual tracks are recorded on a BD-ROM/DVD VIDEO. Selects the sound track on CDs.

Displays the favorite TV channel list.

SUBTITLE (page 73)/CC Selects the subtitle language

when multi-lingual subtitles are recorded on a BD-ROM/DVD VIDEO.

Changes the subtitle of the TV.

Remote

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPTI O

N S

HOME

TO O

LS

9

0

6

32

5

87

4

1

1

2

4

3

5

6 7

8

9

q;

qa

qs

qd

AMP

AMP

AMP

AMP

AMP

AMP

US

ANGLE/WIDE Switches to other viewing angles

when multi-angles are recorded on a BD- ROM/DVD VIDEO.

Changes the aspect ratio of the connected TV.

F REPEAT Plays music tracks repeatedly.

Pressing repeatedly cycles through all track repeat, one track repeat, and off.

SHUFFLE Plays all the music discs in

random order. Pressing the button toggles between random playback on and off.

ALL DISCS Plays all the music or photo discs

in the player. Plays all the music discs repeatedly or randomly during Repeat Play or Shuffle Play. The ALL DISCS indicator lights up in the front panel display. To cancel, press the button again.

G TIME Displays the elapsed/remaining

playback time in the front panel display. Each time you press the button, the display changes as follows.

When playing a BD-ROM/DVD VIDEO Elapsed time of the current title

r Remaining time of the current title

When playing a CD Elapsed time of the current track

r Remaining time of the current track

r Elapsed time of the current disc

r Remaining time of the current disc

DISPLAY (page 15)

When playing a video or photo Displays the disc or file information on the screen.

When playing music Displays the playback information on the front panel display.

Each press changes the display as follows: Playing time t Track name t Album name

When displaying the home menu Displays the currently selected category icon/group name/sorting order and operation guide.

H Color buttons (RED/GREEN/ BLUE/YELLOW)

Short cut keys for selecting items on some BDs menus (can also be used for BDs Java interactive operations).

I TOP MENU (page 39)/GUIDE Opens or closes a BDs or DVDs

Top Menu. Displays the Digital Electronic

Program Guide (EPG).

POP UP/MENU (page 39)/GUI MODE

Opens or closes a BD-ROMs Pop-up Menu or the DVDs menu.

Switches the menu display mode between GUI MODE and DISPLAY MODE.

OPTIONS (page 38, 44, 48)/ TOOLS

The options menu that can be selected appears on the screen.

HOME (page 15, 37, 63)

Enters or exits the home menu.

RETURN

Returns to the previous display.

B/V/v/b

Moves the highlight to select a displayed item.

(enter)

Enters the selected item.

J SORT Changes the title order. Each time

you press the button, the list is sorted by the selected item.

AMP

AMP

AMP

AMP

AMP

AMP

AMP

,continued

13

14U

S

GROUP Displays titles by category. Each

time you press the button, the list is switched by the selected category.

K . PREV/NEXT > (previous/ next)

Skips to the previous/next chapter, track, or file. To go to the beginning of the previous track, press . PREV twice.

REPLAY/ADVANCE (instant replay/instant advance)

Replays the scene/briefly fast forwards the scene.

m/M (fast reverse/fast forward)

Fast reverses/fast forwards the disc when pressed during playback. Each time you press the button, search speed changes as follows*: Playback direction M1 (10) t M2 (30) t M3 (120) Reverse direction n (1) t m1 (10) t m2 (30) t m3 (120) When you press and hold the button, fast forward/fast reverse continues at the selected speed until you release the button. * Search speed does not change when playing

CDs. Speed multiple values are approximate.

To resume normal playback, press N PLAY.

To play in slow, freeze frame (playback direction only) Plays BDs/DVDs in slow motion when M is pressed for more than one second in pause mode. Plays one frame at a time when M is pressed briefly in pause mode. To resume normal playback, press

N PLAY.

N PLAY (page 37) Starts or re-starts

playback. Plays a slideshow when a disc containing JPEG image files is inserted.

SCENE SEARCH (page 40) Switches to Scene Search mode,

which lets you move quickly between scenes within the title currently being played back.

X PAUSE (page 38) Pauses or re-starts

playback.

x STOP Stops playback and

remembers the stop point (resume point) (page 38, 45).

L MUTING (page 59) Turns off the sound

temporarily.

VOLUME/TV VOL +/ (page 59)

Adjusts the volume.

DISC SKIP (page 38, 45, 49)/TV CH (channel) +/

Selects the disc you want to play. Press DISC SKIP+/ repeatedly until you find the disc you want to play. When you release the button, playback of the selected disc starts.

Selects the TV channels up and down.

M DIMMER Adjusts the lighting of the front

panel display.

RENTAL SLOT (page 35) Opens or closes the front cover to

play a disc in slot number 1.

LOAD (page 51) Reads the disc information of all

unknown discs, and loads it into the memory.

AMP

AMP

US

Guide to On-screen Menu Display

The home menu appears when you press HOME, and provides entries to select a disc or setting item.

A Category icons Video : Lists the discs containing

video. Music : Lists the discs containing

music. Photo : Lists the discs containing

photo. Setup : Lists the setting items.

B Discs, Playlists The disc icons indicate as follows.

Other Discs: Group of invalid discs or an update disc

Unknown Discs: Group of unidentified discs

Playlists: Group of music playlists (disc icon): Discs whose jacket

picture cannot be acquired from Gracenote Database.

C Disc information icons : Music genre : Movie genre : Music artist/Movie cast : Movie director

To display information at the top and bottom of the screen Press DISPLAY. Press the button again to turn off the display.

A Header information Displays the currently selected category/ folder name and list type (group name/ sorting order)

B Footer information Displays available buttons and their functions

For video and photo playback, the display turns on/off by pressing DISPLAY. The displayed information differs depending on the disc type and player status.

When playing a BD-ROM/DVD VIDEO

A The currently selected angle

B Title number or name

C The currently selected audio or subtitle setting

D Available functions ( angle/ audio/ subtitle)

Home menu display

Screen displays during playback

,continued

15

16U

S

E Playback information Displays Disc type/Play mode/Video codec/Bit rate/Playing status bar/ Playing time (Remaining time*)

F Output resolution/Video frequency

* Displayed when you press TIME repeatedly.

z You can also check the playback information in

the front panel display (page 10). Press SUBTITLE, AUDIO, or ANGLE, and you

can check each type of information.

When playing a photo file

A File name

B Album name

C Shooting date

D Rotating status

E Disc type/Playing status

F Current file number/total number of files

When playing a music CD/MP3 audio track

A Track/file name

B Audio mode

C Playing information Displays Disc type/Playing status bar/ Track number/Playing time

D Track information Displays Artist name/Album name/ Genre name/Play mode

US

Getting Started

Getting Started

Hooking Up the Player Check that you have the following items. Audio/video cord (phono plug 3) (1) AC power cord (1) Remote commander (remote) (1) Size AA (R6) batteries (2)

Follow steps 1 through 9 to hook up and adjust the settings of the player. Do not connect the AC power cord until you reach Step 5: Connecting the AC Power Cord (page 30).

17

18U

S

Step 1: Connecting to Your TV The player has the following video jacks. Connect the player to your TV according to the input jack on your TV. If you connect the player to your TV using an HDMI cable, you can enjoy high quality digital pictures and sound through the HDMI OUT jack.

b Plug in cables securely to prevent unwanted

noise. Refer to the instructions supplied with the

components to be connected. You cannot connect this player to a TV that does

not have a video input jack. Do not apply too much pressure on the connecting

cables. Pushing against the cabinet wall, etc., may damage the cable.

To connect to a TV with DVI input Use an HDMI-DVI converter cable (not supplied). A DVI jack will not accept audio signals, so you need to use another audio connection in addition to this connection (page 23). Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP compliant (e.g., DVI jacks on PC displays).

Jack type Video resolution Hookup

High quality

Standard quality

Digital High Definition: 1080/24p, 1080p, 1080i, 720p Standard Definition: 480p, 480i

See Connecting to an HDMI jack (page 19).

Analog High Definition: 1080i, 720p Standard Definition: 480p, 480i

See Connecting to component video jacks (Y/PB/PR) (page 21).

Standard Definition: 480i

See Connecting to an audio/video or S VIDEO jack (page 22).

Standard Definition: 480i

See Connecting to an audio/video or S VIDEO jack (page 22).

US

Getting Started

Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and sound through the HDMI OUT jack. If you connect a Sony TV that is compatible with the Control for HDMI (BRAVIA Sync) function (page 56), refer to the operating instructions supplied with the TV. If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.

Notes on connecting to the HDMI OUT jack Observe the following as improper handling may damage the HDMI OUT jack and the connector. Carefully align the HDMI OUT jack on the

rear of the player and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted.

Be sure to disconnect an HDMI cable when moving the player.

If you place the player on a cabinet with an HDMI cable connected, do not apply too much pressure to the cabinet wall. It may damage the HDMI OUT jack or the HDMI cable.

When connecting or disconnecting, do not screw in or rotate the HDMI connector.

Connecting to an HDMI jack

TV

Blu-ray Disc/DVD player

HDMI cable (not supplied)

,continued

19

20U

S

b Not all high definition television sets are fully

compatible with this product and may cause artifacts to be displayed in the picture. In the case of 480i/480p/720p/1080i/1080p scan picture problems, it is recommended that the user switch the connection to the VIDEO OUT (VIDEO or S VIDEO) jack. If there are questions regarding our TV set compatibility with this model 480i/480p/ 720p/1080i/1080p Blu-ray Disc/DVD player, please contact our customer service center.

If the picture is not clear, unnatural or not to your satisfaction, change the video output resolution in step 3 of Output Video Format under the Video Settings setup (page 66).

Be sure to use only an HDMI cable that bears the HDMI logo.

US

Getting Started

Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component video cable or three video cables (not supplied) of the same kind and length. You can enjoy high-quality pictures. Be sure to connect to the AUDIO OUT (L/R) jacks using the audio/video cord.

b When you connect the player and TV using a component video cable, disconnect the video plug (yellow) of the audio/video cord.

Connecting to component video jacks (Y/PB/PR)

Component video cable (not supplied)

(green) (red)(blue)

: Signal flow

Match the color of the plug to that of the jack.

Blu-ray Disc/DVD player

TV

Match the color of the plug to that of the jack.

(green) (red)(blue)(red) (white)

(red) (white)

Audio/video cord (supplied)

,continued

21

22U

S

Connect the VIDEO OUT (VIDEO) jack and AUDIO OUT (L/R) jacks of the player and your TV using the audio/video cord. You can enjoy standard quality pictures and sound.

b When you connect the player and TV using an S- video cord, disconnect the video plug (yellow) of the audio/video cord.

Connecting to an audio/video or S VIDEO jack

Audio/video cord (supplied)

: Signal flow

Match the color of the plug to that of the jack.

Blu-ray Disc/DVD player

TV

S-video cord (not supplied)

or

(yellow)(red) (white)

(yellow)(red) (white)

US

Getting Started

Step 2: Connecting to Your AV Amplifier (Receiver) AV amplifier (receiver) and cable requirements differ as follows, depending on the source. To enjoy BD high quality sound, set BD Audio Setting to Direct in the Audio Settings setup (page 71). To enjoy secondary audio and interactive audio, set BD Audio Setting to Mix in the Audio Settings setup (page 71).

*1 When BD Audio Setting is set to Direct in the Audio Settings setup, audio signals decoded by the AV amplifier (receiver) are output.

*2 When BD Audio Setting is set to Direct in the Audio Settings setup, the HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, and DTS-HD Master Audio) signal decoded by the player is output. When BD Audio Setting is set to Mix in the Audio Settings setup, the DTS-HD audio is output as 5.1 channel DTS-decoded audio.

z The supported audio formats of BDs/DVDs are

specified on the back of each package. For details on audio output signals, see Audio

Output Signals on page 89.

b When you connect the player to your AV

amplifier (receiver) using an HDMI cable, do one of the following: Connect your AV amplifier (receiver) to your

TV using an HDMI cable, or Connect the player to your TV using a video

cable other than an HDMI cable (component video cable, S-video cord, or audio/video cord).

If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come from the speakers, which could damage your ears or the speakers.

To enjoy Source AV amplifier (receiver)

Cable (hookup)

7.1 channel audio

Dolby TrueHD Dolby TrueHD- compatible AV amplifier (receiver)

HDMI cable*1 (page 24) or 7.1 channel audio cord*2 (page 26)

Dolby Digital Plus

Dolby Digital Plus- compatible AV amplifier (receiver)

DTS-HD (DTS- HD High Resolution and DTS-HD Master Audio)

DTS-HD-compatible AV amplifier (receiver)

LPCM 7.1 channel LPCM- compatible AV amplifier (receiver)

5.1 channel audio

Dolby Digital Dolby Digital- compatible AV amplifier (receiver)

HDMI cable (page 24), Digital optical/coaxial cord (page 25), or 7.1 channel audio cord (page 26)

DTS DTS-compatible AV amplifier (receiver)

Stereo audio Stereo audio- compatible AV amplifier (receiver)

Stereo audio cord (page 27)

,continued

23

24U

S

If your AV amplifier (receiver) has an HDMI input, you can enjoy surround sound. If you connect a Sony AV amplifier (receiver) that is compatible with the Control for HDMI function (page 56), refer to the operating instructions supplied with the AV amplifier (receiver).

z Make the following settings to enjoy higher quality sound from the connected AV amplifier (receiver). Set Audio Output Priority to HDMI in the

Audio Settings setup (page 69). Set Audio (HDMI) to Auto in the Audio

Settings setup (page 71). Set BD Audio Setting to Direct in the Audio

Settings setup (page 71).

b Not all HDMI-compatible AV amplifiers (receivers) accept 8ch Linear PCM signals. Refer also to instructions supplied with the connected AV amplifier (receiver).

Connecting to an HDMI jack

AV amplifier (receiver)

Blu-ray Disc/DVD player

TV

HDMI cable (not supplied)

HDMI cable (not supplied)

US

Getting Started

If your AV amplifier (receiver) has a Dolby Digital, Dolby Pro Logic, or DTS decoder and a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS (5.1ch) surround effects.

1 Connect the digital jack of the player and your AV amplifier (receiver).

2 Set Audio Output Priority to Coaxial/Optical in the Audio Settings setup (page 69).

3 Make the appropriate settings in Dolby Digital and DTS under the Audio Settings setup (page 72). Otherwise, no sound or a loud noise will come from your speakers.

Connecting to digital jacks (OPTICAL/COAXIAL)

AV amplifier (receiver)

Digital optical cord (not supplied)

Blu-ray Disc/DVD player

Digital coaxial cord (not supplied)

or

: Signal flow

,continued

25

26U

S

If your AV amplifier (receiver) has 7.1 channel inputs, you can enjoy multi channel surround sound.

1 Connect the 7.1 channel jacks of the player and your AV amplifier (receiver).

2 Set Audio Output Priority to Multi Channel Analog in the Audio Settings setup (page 69).

3 Make the appropriate settings in Speaker Settings under the Audio Settings setup (page 69).

Connecting to 7.1 channel jacks

AV amplifier (receiver)

Blu-ray Disc/DVD player

Stereo audio cord (not supplied)

Monaural audio cord (not supplied)

: Signal flow

Stereo audio cord (not supplied)

Stereo audio cord (not supplied)

Monaural audio cord (not supplied)

US

Getting Started

If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.

Connecting to audio L/R jacks

AV amplifier (receiver)

Audio/video cord (supplied)

: Signal flow

Blu-ray Disc/DVD player

(white)(red)

(white)(red)

Match the color of the plug to that of the jack.

27

28U

S

Step 3: Inserting an External Memory To enjoy additional content (such as BonusView/BD-Live) on certain Blu-ray Disc titles, you will need to use an external memory (not supplied). Insert the external memory device (1 GB or larger USB flash memory, such as Sony USM2GL or USM2GH) into the EXT slot as your local storage.

Insert the external memory into the EXT slot as far as it will go. Check that the EXT indicator lights up in the front panel display when turning the player on.

To remove the external memory

1 Press [/1 to turn the player off.

2 Pull the external memory out from the EXT slot.

b Do not connect anything other than a USB flash

memory, such as an HDD, etc., to the EXT slot. Insert the external memory straight. If you force

the external memory into the slot, this will cause damage to both the external memory and the player.

Keep the external memory away from small children to prevent them from accidentally swallowing it.

Do not apply too much pressure to the external memory in the slot, as it may cause a malfunction.

The Sony USM2GL (available as of September 2009) is recommended.

Other USB flash devices may support this function. However we cannot guarantee compatibility with all USB flash memory devices.

When inserting a USB flash memory, check the insertion direction before inserting it.

Some USB flash memory devices may stick out from the EXT slot. Do not force into the slot or apply pressure to the protruding portion of the USB flash memory.

To avoid data corruption or damage to the external memory, turn the player off when inserting or removing the external memory.

If the EXT indicator does not light up, turn the player off, remove and re-insert the external memory, then turn the player on again.

The external memory is used as the local storage for Bonus View/BD-Live. Insert a blank external memory, or one containing nothing other than photo or music files, to avoid corrupting the contained data.

Terminal side up

Rear of the player

External memory (not supplied)

US

Getting Started

Step 4: Connecting to the Network Connect the LAN (100) terminal of the player to your Internet source using a network cable to receive disc information or update the players software. You can also enjoy the BD-Live function (page 39).

1 Connect the LAN (100) terminal of the player to your Internet source. Methods to connect to your Internet source include: Connecting to a broadband router

directly Connecting via a wireless LAN router Refer also to the instructions supplied with the broadband router or the wireless LAN router.

2 Make the appropriate settings in Internet Settings under the Network Settings setup (page 78).

To update the players software using the network See Network Update (page 64) and Software Update Notification (page 77).

To enjoy the BD-Live function See Enjoying BonusView/BD-Live (page 39).

b Do not connect a phone line to the LAN (100)

terminal, as it may cause a malfunction. For optimal performance of BD-Live functions,

we recommend using an Internet connection with an effective speed of 1 Mbps or greater.

To allow Internet connections from BD contents, select Allow in BD Internet Connection during Easy Setup (page 31). To change the setting, see page 75.

About network (LAN) cables Depending on the modem or router, the type of network (LAN) cable, straight or crossing, differs. For details on network (LAN) cables, refer to the operating instructions supplied with the modem or router.

When connecting to a broadband router directly

Blu-ray Disc/DVD player

Broadband router

to PC

Internet

ADSL modem/ Cable modem

Network cable (not supplied)

Network cable (not supplied)

,continued

29

30U

S

b Do not connect the LAN terminal of the player to the LAN terminal of the PC.

Step 5: Connecting the AC Power Cord After all other connections are complete, connect the supplied AC power cord to the AC IN terminal of the player. Then plug the player and TV power cords into an AC outlet.

When connecting via a wireless LAN router

Blu-ray Disc/DVD player

to PC

Wireless LAN router (access point)

Internet

ADSL modem/ Cable modem

Ethernet/wireless LAN media converter

Network cable (not supplied)

Network cable (not supplied)

to AC IN1

2 to AC outlet

US

Getting Started

Step 6: Preparing the Remote You can control the player using the supplied remote.

Inserting batteries into the remote Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player (page 9).

b Use the batteries correctly to avoid possible

leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following: Do not use a new battery with an old battery, or

batteries of different manufacturers. Do not attempt to recharge the batteries. If you do not intend to use the remote for an

extended period of time, remove the batteries. If battery leakage occurs, wipe out any liquid

inside the battery compartment, and insert new batteries.

Do not expose the remote sensor (marked on the front panel) to strong light, such as direct sunlight or a lighting apparatus. The player may not respond to the remote.

Step 7: Easy Setup Follow the steps below to make the minimum number of basic adjustments to use the player. If you do not complete Easy Setup, it will appear each time you turn on your player. Make the settings below in the following order.

1 Press AV [/1 to turn on the TV.

2 Press [/1 to turn on the player. The player turns on after a moment.

3 Switch the input selector on your TV so that the signal from the player appears on your TV screen. The display for OSD language selection appears. If the display for OSD language

selection does not appear Press HOME, and select Easy Setup in the Setup setup (page 79). Then, select Start, and press .

When turned on for the first time Wait for a short while before the player turns on and starts Easy Setup.

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

TV VOL TV CH

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

[/1

B/V/v/b/ RETURN

AV [/1

HOME

,continued

31

32U

S

4 Select a language for the on-screen displays using V/v, and press .

The initial settings message appears.

5 Select Start, and press .

6 Select the cable type used to connect the player to your TV, and press .

Select HDMI when connecting your TV using an HDMI cable, and go to step 7.

b When connecting the HDMI OUT jack and other video output jacks at the same time, select Component Video.

Select Component Video when connecting your TV using a component video cable, and go to step 7. Select Video or S Video when connecting your TV using a video cord or S-video cord, and go to step 8.

7 Select a video output resolution for the connected TV, and press . For details about the video output resolution, see page 67.

When you select HDMI in step 6

b When Auto or 1080p is selected and the HDMI OUT jack and other video output jacks are connected at the same time, video signals may output from the HDMI jack only. When connecting other equipment at the same time, press RETURN to return to step 6 and change the TV Connection Method setting.

When you select Component Video in step 6

Follow the on-screen instructions and go to the next step.

b If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen. If the selected video output resolution is incorrect, no picture will appear on the screen when you press any button within those 30 seconds. In this case, press x on the player for more than 10 seconds to reset the video output to the lowest resolution. To change the video output resolution, set Output Video Format in the Video Settings setup (page 66).

US

Getting Started

8 Select the aspect ratio that matches your TV, and press .

Select 16:9 when connecting to a wide- screen TV or a TV with a wide mode function. Select 4:3 when connecting to a 4:3 screen TV without a wide mode function.

9 (Only when connecting your TV using an HDMI cable) Set the Control for HDMI function to On or Off, and press .

Select On to use the Control for HDMI function when connecting Sony components that are compatible with the Control for HDMI function (page 56). If you do not use the Control for HDMI function, select Off.

10 Select Allow to allow Internet connection from BD contents, and press .

Select Do not allow to not allow Internet connection from BD contents.

11 Set Quick Start Mode to On or Off, and press .

For details about Quick Start Mode, see page 77.

12 Select Finish, and press .

z You can reset settings to their factory defaults

(page 80). You can run Easy Setup again from Easy

Setup in Setup (page 79).

33

34U

S

Step 8: Inserting Discs You can insert up to 400 discs into this player.

1 Press OPEN/CLOSE. The front cover opens.

2 Turn the DISC/AMS dial until you find the disc slot where you want to insert a disc. You can check the disc slot number indicated on the front panel display or by the slot.

3 Insert a disc with the label side facing right.

4 Repeat the above steps to insert more discs.

5 Press OPEN/CLOSE. The front cover closes. The rotary table turns and the disc slot last selected is set to the playing position.

z To skip 100 disc slots ahead, press +100 on the

player. After the front cover is closed, the disc inserted in

the slot at the loading position will be automatically loaded and set to the playing position.

b Make sure you have inserted the disc into each

slot at a right angle to the rotary table. If the disc is not inserted properly, it may damage the player or the disc.

If you drop a disc into the player and/or the disc does not go into the slot correctly, consult your nearest Sony dealer.

Make sure the rotary table comes to a complete stop before inserting or removing discs.

Front cover

OPEN/CLOSE

DISC/AMS dial

+100

DISC EJECT

Disc slot number

Disc slot at the loading position

Insert the disc all the way into the slot until it is completely seated.

Label facing right (playback side on double-sided disc facing left)

US

Getting Started

The front cover closes automatically when you press N PLAY. Be careful not to put your hand into the player after pressing N PLAY, otherwise your hand may be caught in the front cover.

To remove discs

1 While checking the disc slot number indicated on the front panel display or by the slot, turn the DISC/AMS dial until you find the disc you want to remove.

2 Press DISC EJECT. The selected disc is set to the loading position and the front cover opens. The disc in the selected slot moves up.

3 Remove the disc. Repeat the above steps to remove other discs.

4 Press OPEN/CLOSE. The front cover closes.

z You can remove the current disc by directly pressing DISC EJECT on the player.

b Do not turn the turntable by hand. Do not reach inside of the turntable compartment.

Always follow the correct steps for inserting and removing discs.

When transporting the player, remove all discs from the player. Failure to remove the discs may cause damage to the player.

When closing the front cover, be careful not to let anything get caught between the door and the player.

By pressing RENTAL SLOT, slot number 1 is set to the loading position for easy playback/removal of a rental disc.

1 Press RENTAL SLOT. Slot number 1 is set to the loading position and the front cover opens.

2 Insert a disc.

3 Press RENTAL SLOT. The front cover closes and slot number 1 is set to the playing position.

To remove the disc

1 Press RENTAL SLOT. Slot number 1 is set to the loading position and the front cover opens.

2 Remove the disc.

z When the front cover opens, pressing RENTAL SLOT sets slot number 1 to the loading position.

Ejected disc

DISC EJECT

Inserting a rental disc

RENTAL SLOT

35

36U

S

Step 9: Loading Disc Information The player reads the disc information of all the unknown discs and loads it all into memory so that disc type, titles, and other text information can be displayed on the list.

Press DISC LOAD when the players home menu is displayed on the TV screen. Loading starts. The player accesses the Gracenote Database for disc information. When loading finishes, the title list appears.

To cancel loading Press x (stop). The loaded data is saved.

z Discs whose information is not in the Gracenote

Database will be indicated as No Name in the title list.

The player cannot load disc information during playback. You need to stop playback and display the home menu before pressing DISC LOAD. When viewing a photo or video, press x (stop). When playing music, press RETURN.

Loading disc information for approx. 300 or 400 discs at one time may take a long time to complete. Loading time also depends on your network speed.

Discs that failed to register at the time of loading are indicated as Unknown Discs in the title list. You can register them manually (page 52).

DISC LOAD

x

US

Playback

Playback

Playing BDs/DVDs

1 Switch the input selector on your TV so that the signal from the player appears on your TV screen.

2 Press HOME.

3 Select (Video) using B/b.

Guide to Disc Information

A Disc jacket

B Slot number

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

x STOP

OPTIONS

X PAUSE

N PLAY

B/V/v/b/

HOME

DISC SKIP+/

DISPLAY

,continued

37

38U

S

C Title (Release year)

D Rating/ Director name/ Cast name/ Genre

4 Select a disc using V/v, and press N PLAY.

To select a title When you play BDs or DVDs recorded on other equipment, you can select a title.

1 Follow steps 1 to 3 of Playing BDs/ DVDs (page 37).

2 Select a disc using V/v, and press . The titles appear.

3 Select a title using V/v, and press N PLAY.

Available OPTIONS The options menu appears when you press OPTIONS. The available items differ depending on the situation.

1 Press OPTIONS. The options menu appears.

2 Select an item using V/v, and press .

Available OPTIONS on the list screen

Available OPTIONS during playback

Various video playback operations

Items Details

Load All Discs Loads all disc information.

Sort By Changes the title order. Title Name Slot Number Release Year

Group Content

Displays titles by categories. All Titles By Genre By Cast By Director

Play Resumes playback from the stop point. Resume Play is canceled when: The disc is changed.

Start Starts version up (page 65).

Edit Edits the disc information (page 53).

Load Loads disc information (page 51).

Eject Ejects the disc.

Items Details

A/V Settings Adjusts settings for picture and sound. Video Settings (page 41) Audio Settings (page 43)

Play from beginning

Plays the title from the beginning.

Top Menu Displays the discs Top Menu (page 39).

Menu/Popup Menu

Displays the BD-ROMs Pop-up Menu or DVDs menu (page 39).

Stop Stops playback.

Title Search Searches for a title and starts playback from the beginning (page 41).

Chapter Search

Searches for a chapter and starts playback from the beginning (page 41).

Eject Ejects the disc.

Buttons Operations

N PLAY Starts playback from the point where you pressed x STOP.

x STOP Stops playback.

X PAUSE Pauses playback.

DISC SKIP+/ Changes the disc.

DISPLAY Displays the disc information.

US

Playback

To display Top Menu When you play a BD or DVD, you can display the Top Menu.

1 Press TOP MENU during playback. The Top Menu appears.

2 Select an item using B/V/v/b.

To display Pop-up Menus Some BD-ROMs contain Pop-up Menus that appear without interrupting playback.

1 Press POP UP/MENU during playback. The Pop-up Menu appears.

2 Select an item using B/V/v/b, the color buttons or the number buttons, and follow the on-screen instructions.

Some BD-ROMs have bonus contents and other data that can be downloaded to the external memory (local storage) for enjoyment.

1 Turn the player off.

2 Insert the external memory (not supplied) into the EXT slot on the rear of the player. The external memory is used as the local storage. Make sure that the external memory is properly inserted into the player (page 28).

3 Connect the player to a network (page 29).

4 Turn the player on.

5 Set BD Internet Connection to Allow in the BD/DVD Viewing Settings setup (page 75).

6 Insert a BD-ROM with BonusView/BD- Live. The operation method differs depending on the disc. Refer to the instruction manual supplied with the disc.

Using the BDs or DVDs menu DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

POP UP/ MENU

TOP MENU

Color buttons

Number buttons

B/V/v/b/

ENTER

Enjoying BonusView/BD-Live BD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

[/1

B/V/v/b/

HOME OPTIONS

,continued

39

40U

S

To delete data in the external memory You can delete unnecessary data.

1 Press HOME.

2 Select (Video) using B/b.

3 Select BD Data using V/v, and press .

4 Select the disc name, and press OPTIONS.

5 Select Erase, and press .

6 Select OK, and press . The data of the selected disc will be deleted.

z To delete all data in the external memory at once,

select Erase All in step 5. Press instead of OPTIONS in step 4 to skip

step 5.

b Depending on the BD-ROM, the disc name may not be displayed.

You can move quickly between scenes within the title currently being played back.

1 Press SCENE SEARCH during playback or in pause mode. Playback pauses and a bar with a scene indicator (square-shaped indicates the current point) appears at the bottom of the screen.

2 Move the scene indicator to the scene you are searching for using B/b or m/M.

The scene indicator on the bar is displayed around the playing point.

Searching for a scene quickly (Scene Search)

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

X PAUSE

N PLAYSCENE SEARCH

m/M

B/b/

The current point

Scene indicator

US

Playback

3 Release the button at the point you want to watch. The scene at which you released the button is displayed in pause mode. To search for a scene again, move the scene indicator using B/b or m/M.

4 Press SCENE SEARCH, , N PLAY, or X PAUSE. Playback starts.

To cancel Scene Search mode Press SCENE SEARCH, , N PLAY, or X PAUSE. Playback starts from the point you pressed the button.

b The Scene Search function is available for titles

longer than 100 seconds and shorter than 100 hours.

The Scene Search function may not be available, depending on the disc.

You can search for a chapter if the title contains chapter marks.

1 Press OPTIONS during playback or in pause mode. The options menu appears.

2 Select a search method using V/v, and press . Title Search (for BD-ROMs/DVD VIDEOs) Chapter Search

The display for entering the number appears. Example: Chapter Search

3 Enter the number of the title or chapter using the number buttons. If you make a mistake, press CLEAR, and re-enter another number.

4 Press ENTER. After a while, the player starts playback from the selected number.

To adjust the picture

1 Press OPTIONS during playback. The options menu appears.

Searching for a Title/Chapter DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

V/v/

CLEAR

Number buttons

ENTER

Adjusting picture and sound for videos

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

,continued

41

42U

S

2 Select A/V Settings using V/v, and press .

3 Select Video Settings using V/v, and press . The Video Settings screen appears.

4 Select an item using V/v, and press . The default settings are underlined.

5 Select or adjust the settings using B/V/v/ b, and press . To adjust any other items, repeat steps 4 and 5.

z The HD Reality Enhancer settings are individually set during video and photo playback.

b Set the picture setting of your TV to Standard

before changing the Picture Quality Mode settings.

Video Settings is not available when the connected TV is set to Theater Mode (page 56).

Depending on the disc or the scene being played, FNR, BNR or MNR effects may be hard to discern.

Video Equalizer elements

1 Select Video Equalizer in step 4 above, and press .

2 Select an item, and press .

HD Reality Enhancer elements

1 Select HD Reality Enhancer in step 4 above, and press .

2 Select an item, and press .

Items Details

Picture Quality Mode (Standard/ Brighter Room/ Theater Room/ Memory)

Selects the picture settings for different lighting environments.

Video Equalizer

This setting is selectable when Picture Quality Mode is set to Memory (see Video Equalizer elements on page 42).

HD Reality Enhancer

This setting is available only when video signals are output from the HDMI OUT jack or the COMPONENT VIDEO OUT jacks (see HD Reality Enhancer elements on page 42).

NR (Noise Reduction)

Reduces the noise in the picture (see NR elements on page 43).

Items Details

Contrast ((weak) 3 ~ 0 ~ 3 (strong))

Changes the contrast.

Brightness ((dark) 3 ~ 0 ~ 3 (bright))

Changes the overall brightness.

Chroma ((light) 3 ~ 0 ~ 3 (deep))

Deepens deep colors, or lightens light colors.

Hue ((red) 3 ~ 0 ~ 3 (green))

Changes overall color balance.

Gamma Adjusts the picture balance between light and dark areas.

Items Details

Enhance (3 ~ 0 ~ 3)

Enhances the scene picture outline pixel by pixel.

Smoothing (Off/Standard/ High)

Smooths the gradation on flat parts of the picture.

FGR (0 ~ 3) Reduces film grain.

US

Playback

NR elements

1 Select NR in step 4 above, and press .

2 Select an item, and press .

To use the Playback Memory function When you play BDs*1/DVDs*2, the player stores picture settings for each disc, letting you play the same disc with the same settings later. The player can store picture settings for up to 50 discs. When the settings exceed 50, the player automatically erases the oldest setting.

*1 BD-ROMs and BD-REs/BD-Rs in BDMV mode *2 DVD VIDEOs and DVD-RWs/DVD-Rs/

DVD+RWs/DVD+Rs in video mode

Set Playback Memory to On (page 75).

z The player can store picture settings during video playback but not during photo playback.

b When connected to a Theater Mode-compatible Sony TV using an HDMI cable, set the TVs video mode to a mode other than Theater.

To adjust the audio characteristics

1 Press OPTIONS during playback. The options menu appears.

2 Select A/V Settings using V/v, and press .

3 Select Audio Settings using V/v, and press . The Audio Settings screen appears.

4 Select an item using V/v, and press . The default settings are underlined.

5 Select or adjust the settings using B/V/v/ b, and press . To adjust any other items, repeat steps 4 and 5.

b The Audio Filter function does not work for

digital audio signals output from the HDMI OUT/ DIGITAL OUT (OPTICAL/COAXIAL) jacks.

There may be little effect by changing the Audio Filter setting depending on the disc or playback environment.

Items Details

FNR (Off/Auto)

Reduces random noise appearing in the picture.

BNR (Off/Auto)

Reduces mosaic-like block noise in the picture.

MNR (Off/Auto)

Reduces minor noise around the picture outlines (mosquito noise). Items Details

AV SYNC (short) 0 ~ 20 ~ 120 msec (long)

Adjusts the gap between picture and sound, by delaying the sound output in relation to the picture output (0 to 120 milliseconds).

Audio Filter (for analog audio signals only)

Sharp: Provides a wide frequency range and spatial feeling. Normally select this.

Slow: Provides smooth and warm sound.

43

44U

S

Playing Music CDs

*1 BD-ROMs and BD-REs/BD-Rs containing MP3 audio tracks

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing MP3 audio tracks

*3 CD-ROMs and CD-RWs/CD-Rs containing MP3 audio tracks

1 Press HOME.

2 Select (Music) using B/b.

Guide to Disc Information

A Disc jacket

B Slot number

C Album name (Release year)

D Artist name/ Genre

3 Select a disc using V/v, and press N PLAY. The Music Player screen appears, then playback starts.

To select a track

1 Follow steps 1 to 2 of Playing Music CDs (page 44).

2 Select a disc, and press . The music list appears.

3 Select a track using V/v. To play the selected track, press N PLAY.

Available OPTIONS The option menu appears when you press OPTIONS. The available items differ depending on the situation.

1 Press OPTIONS. The options menu appears.

2 Select an item using V/v, and press .

Available OPTIONS on the music list screen

CDDATA DVD DATA CDBD *1 *2 *3

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

x STOP

OPTIONS

X PAUSE

B/V/v/b/

HOME

TIME

. PREV/ > NEXT N PLAY

m/M

DISC SKIP+/

Items Details

Group Content

Displays titles by categories. All Albums By Genre By Artist

Sort By Changes the title order. Album Name Slot Number Release Year

US

Playback

Available OPTIONS during playback

Various music playback operations

b When you press x STOP, music CD is returns to the top of the disc. DATA disc is returns to the file of the top of the folder. Playlist is returns to the top of creating file.

Play All Discs Displays options for Play All Discs. On Off

Repeat Display options for Repeat Play (page 46).

Disc Shuffle Display options for Shuffle Play (page 46).

Load All Discs Loads all disc information (page 51).

Play Starts playback.

Start Starts version up (page 65).

Edit Edits the disc information (page 53).

Load Loads disc information (page 51).

Eject Ejects the disc.

Add to Playlist Creates and edits the Playlist (page 47).Clear Playlist

Delete from Playlist

Move to top

Move up

Move down

Move to bottom

Items Details

Play All Discs Displays options of Play All Discs. On Off

Disc Shuffle Display options for Shuffle Play (page 46).

Repeat Display options for Repeat Play (page 46).

Play Plays the selected track.

Stop Stops playing the track.

Eject Ejects the disc.

Items Details

Buttons Operations

N PLAY Starts playback.

x STOP Stops playback.

X PAUSE Pauses playback.

. PREV/ NEXT >

Skips to the beginning of the current or next track. To go to the previous track press . PREV twice.

m/M Fast reverse/fast forwards when pressed during playback.

TIME Switches time information on the screen and the front panel display.

DISC SKIP+/ Changes the disc.

,continued

45

46U

S

*1 BD-ROMs and BD-REs/BD-Rs containing MP3 audio tracks

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing MP3 audio tracks

*3 CD-ROMs and CD-RWs/CD-Rs containing MP3 audio tracks

You can play all albums/tracks on a disc, or a single album or track repeatedly. By selecting All Discs mode (page 45), you can repeat all of the discs in the player.

1 Press OPTIONS.

2 Select Repeat using V/v, and press .

3 Select an item using V/v, and press .

*1 BD-ROMs and BD-REs/BD-Rs containing MP3 audio tracks

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing MP3 audio tracks

*3 CD-ROMs and CD-RWs/CD-Rs containing MP3 audio tracks

You can have the player shuffle discs.

1 Press OPTIONS.

2 Select Disc Shuffle using V/v, and press .

3 Select an item using V/v, and press .

z By selecting All Discs mode (page 45), you can shuffle all of the discs in the player.

Playing Music repeatedly

Items Details

All Tracks Plays all tracks on a disc repeatedly.

One Track Plays a track repeatedly.

Off Disables Repeat Play.

CDDATA DVD DATA CDBD *1 *2 *3

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

V/v/

Playing Discs in random order (Shuffle Play)

Items Details

On Plays discs in random order.

Off Disables Shuffle Play.

CDDATA DVD DATA CDBD *1 *2 *3

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

V/v/

US

Playback

*1 BD-ROMs and BD-REs/BD-Rs containing MP3 audio tracks

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing MP3 audio tracks

*3 CD-ROMs and CD-RWs/CD-Rs containing MP3 audio tracks

You can create eight Playlists by selecting the tracks of the favorite.

1 Select a track you want to add to a Playlist, and press OPTIONS. The options menu appears.

2 Select Add to Playlist using V/v, and press .

3 Select a Playlist number using V/v, and press . The selected track is added to the Playlist.

To play a Playlist

1 Press HOME and select (Music) using B/b.

2 Select (Playlists) using V/v, and press .

3 Select a Playlist using V/v, and press N PLAY.

To change the playing order

1 Select a Playlist using V/v, and press .

2 Select a track using V/v, and press OPTIONS.

3 Select an item using V/v, and press .

The selected track moves to a new location.

To delete the selected track You can delete a track or all tracks from a Playlist.

To delete one track from a Playlist

1 Select a Playlist using V/v, and press .

2 Select a track using V/v, and press OPTIONS.

3 Select Delete from Playlist using V/v, and press .

To delete all tracks from a Playlist

1 Select a Playlist using V/v, and press OPTIONS.

2 Select Clear Playlist using V/v, and press .

Creating Playlists

CDDATA DVD DATA CDBD *1 *2 *3

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

HOME

Items Details

Move to top Moves to top of the Playlist.

Move up Moves up one track.

Move down Moves down one track.

Move to bottom

Moves to bottom of the Playlist.

47

48U

S

Playing Photo Files

*1 BD-ROMs and BD-REs/BD-Rs containing JPEG image files

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing JPEG image files

*3 CD-ROMs and CD-RWs/CD-Rs containing JPEG image files

1 Press HOME.

2 Select (Photo) using B/b.

3 Select a disc, and press . The file list or folder list appears.

4 Select a file or folder using V/v, and press . When you select a folder, select a file in the folder using V/v, and press . The selected photo file is displayed.

Available OPTIONS The option menu appears when you press OPTIONS. The available items differ depending on the situation.

1 Press OPTIONS. The options menu appears.

2 Select an item using V/v, and press .

Available OPTIONS on the file list screen

DATA DVDBD *2 DATA CD *3*1

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

x STOP

OPTIONS

B/V/v/b/

HOME

DISPLAY

X PAUSE

. PREV/ > NEXT

DISC SKIP+/

RETURN

Items Details

Slideshow Speed

Changes the slideshow speed. Fast Normal Slow

Play All Discs Displays options for Play All Discs. On Off

Load All Discs Loads all disc information.

View Image Shows a selected photo.

Slideshow Plays a slideshow.

Edit Edits disc name (page 54).

Start Starts version up (page 65).

Load Loads disc information (page 51).

Eject Ejects the disc.

US

Playback

Available OPTIONS during playback

HD Reality Enhancer elements

1 Select HD Reality Enhancer in step 2 above, and press .

2 Select an item, and press .

z The HD Reality Enhancer settings are individually set during video and photo playback.

Various photo playback operations

b When you attempt to play the following photo

files, the mark appears on the screen and they cannot be played. photo files larger than 8,192 pixels (width or

height) photo files smaller than 15 pixels (width or

height) photo files exceeding 32 MB photo files with extreme aspect ratios (greater

than 50:1 or 1:50) photo files in Progressive JPEG format photo files that have a .jpeg or .jpg

extension, but not in JPEG format photo files that have an extremely long name

The following photo files cannot be played. photo files recorded on BD-Rs in any format

other than UDF (Universal Disk Format) 2.6 photo files recorded on BD-REs in any format

other than UDF (Universal Disk Format) 2.5 The following photo files or folders cannot be

displayed in the file list or folder list. photo files that have an extension other than

.jpeg or .jpg photo files that have an extremely long name photo files in the 5th tree or lower 501th or more folders when the total number of

folders and files in a single tree exceeds 500 Photo files edited on a PC may not be played. Thumbnail images of some photo files may not be

displayed. Large photo files may take some time to display

or to start a slideshow.

Items Details

HD Reality Enhancer

This setting is available only when video signals are output from the HDMI OUT jack or the COMPONENT VIDEO OUT jacks (see HD Reality Enhancer elements on page 49).

Slideshow Speed

Changes the slideshow speed. Fast Normal Slow

Play All Discs Displays options for Play All Discs. On Off

Stop Stops a slideshow.

Rotate Left Rotates a photo counterclockwise by 90 degrees.

Rotate Right Rotates a photo clockwise by 90 degrees.

Eject Ejects the disc.

Items Details

Enhance (3 ~ 0 ~ 3)

Enhances the scene picture outline pixel by pixel.

Smoothing (Off/Standard/ High)

Smooths the gradation on flat parts of the picture.

FGR (0 ~ 3) Reduces film grain.

Buttons Operations

x STOP RETURN

Stops a slideshow.

X PAUSE Pauses a slideshow.

. PREV/ NEXT > B/b

Displays the previous or next photo.

DISC SKIP+/ Changes the disc.

DISPLAY Displays the file information.

,continued

49

50U

S

To view best quality images If you have a Sony TV compatible with PhotoTV HD, you can enjoy best quality images by the following connection and settings.

1 Connect the player to the TV using an HDMI cable (not supplied).

2 Set HDMI Resolution of Output Video Format to Auto, 1080i, or 1080p in the Video Settings setup (page 67).

3 Set the TVs video setting to [VIDEO-A] mode. For details on [VIDEO-A], refer to the operating instructions supplied with the TV.

*1 BD-ROMs and BD-REs/BD-Rs containing JPEG image files

*2 DVD-ROMs and DVD+RWs/DVD+Rs/DVD- RWs/DVD-Rs containing JPEG image files

*3 CD-ROMs and CD-RWs/CD-Rs containing JPEG image files

1 Follow steps 1 to 4 of Playing Photo Files (page 48).

2 Press N PLAY. The slideshow starts.

Playing a Slideshow

BD DATA DVD DATA CD *1 *2 *3

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

N PLAY

US

O rganizing D

iscs

Organizing Discs

Loading the Disc Information

You can view the disc information by loading discs.

1 Press HOME.

2 Select (Video), (Music), or (Photo) using B/b, and press OPTIONS.

3 Select Load All Discs using V/v, and press . The player loads the information of all discs. When loading is completed, the information appears on the screen.

Loading the information of all discs

BD DVD CD DATA DVD DATA CD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

HOME

,continued

51

52U

S

To cancel loading

1 Select Cancel, and press . The display asks for confirmation.

2 Select OK using B/b, and press . Updating the database. appears and the loaded data is saved.

z When pressing LOAD, the player loads the information of unknown discs.

1 Press HOME.

2 Select (Video), (Music), or (Photo) using B/b.

3 Select a disc using V/v, and press OPTIONS.

4 Select Load using V/v, and press .

The player accesses the Gracenote Database. When obtaining disc information, information options appear on the screen.

5 Select the desired disc information from options using V/v, and press

. The information you selected is registered as the disc information.

Loading a disc information

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETU

RN

OPT IO

N S

HOME

TO O

LS

9

0

6

32

5

87

4

1

B/V/v/b/

OPTIONS HOME

US

O rganizing D

iscs

Editing a Disc/Title/File Information

You can change the information (such title and artist name) of loaded discs.

1 Press HOME.

2 Select (Video) using B/b.

3 Select a disc using V/v, and press OPTIONS.

4 Select Edit using V/v, and press .

5 Select the item you want to edit and press . For details about entering characters, see Entering characters (page 54).

Available OPTIONS

1 Press HOME.

2 Select (Music) using B/b.

3 Select a disc using V/v, and press OPTIONS.

4 Select Edit using V/v, and press .

5 Select the item you want to edit and press . For details about entering characters, see Entering characters (page 54).

Available OPTIONS when selecting an audio album

Editing the video disc information

Items Details

Rename Title/ Rename Disc

Changes the title or disc name.

Change Genre

Changes the genre information.

BD DVD CD DATA DVD DATA CD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

HOME

Re-enter Cast Name

Enters a new name.

Re-enter Director Name

Enters a new name.

Change Release Year

Enters the release year.

Editing the music disc information

Items Details

Rename Album/ Rename Disc

Changes the album or disc name.

Change Genre

Changes the genre information.

Items Details

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME TO

OL S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

HOME

,continued

53

54U

S

Available OPTIONS when selecting an audio track

1 Press HOME.

2 Select (Photo) using B/b.

3 Select a disc using V/v, and press OPTIONS.

4 Select Edit using V/v, and press .

5 Select Rename Disc, and press . For details about entering characters, see Entering characters (page 54).

The display for entering characters appears when you enter a name for a title, album, etc.

A Entry field You can enter up to 64 characters for a disc name, a title name, an album name, an artist name, a track name or a genre name.

B Cursor

C Scroll mark Displays when a character string can be scrolled.

D [Clear All] Clears all input characters.

[Cancel] Cancels the setting and returns to the previous display.

E Number buttons and assigned characters Each press of the button cycles through the character options.

F [Finish] The input is entered and the setting is finished.

G [Letter type] (RED button) Switches between upper case letters, lower case letters and numbers.

[` ^ ] (GREEN button) Displays for French.

[ ](BLUE button) Displays for French.

[Symbol] (YELLOW button) Displays symbols.

Re-enter Artist Name

Enters a new name.

Change Release Year

Enters the release year.

Items Details

Re-enter Artist Name

Enters a new name.

Rename Track

Changes the track name.

Editing the photo disc name

Items Details

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/

HOME

Entering characters

US

O rganizing D

iscs

H [Clear] Erases the character to the right of the cursor. Erases the character to the left of the cursor when no character is to the right of the cursor.

To enter characters using B/V/v/b Example: To enter Sea

1 Select [PQRS7] and press . Character options appear.

2 Select [S] and press .

3 Select [DEF3] and press . Character options appear.

4 Select [e] and press .

5 Select [ABC2] and press . Character options appear.

6 Select [a] and press .

7 Select [Finish] and press .

To enter characters using number buttons Example: To enter Sea

1 Press 7 four times to select [S].

2 Press RED to switch to the lower case letters.

3 Press 3 twice to select [e].

4 Press 2 once to select [a].

5 Press ENTER.

Available buttons

Available characters

Buttons Details

RED (Letter Type)

Switches the keyboard between upper case letters, lower case letters and numbers.

GREEN/BLUE Displays the keyboard for French.

YELLOW (Symbol)

Displays the keyboard for symbols.

CLEAR (Clear/Clear All)

Erases the selected character. When holding CLEAR for 2 seconds or more, erase all characters to the right of the cursor. Erases all characters to the left of the cursor when no character is to the right of the cursor.

RETURN (Cancel)

Returns to the previous display, canceling the input.

B/V/v/b/ Select an input function using B/V/v/b, and press

. Enter characters as

follows: 1 Select a character selection panel using B/V/v/b, and press

. 2 Select a character using B/b, and press .

Press to return to the previous display after input is complete.

Type Characters

Letters ABCDEFGHIJKLMNOP QRSTUVWXYZ Abcdefghijklmnopqrstuv wxyz

Symbols . , - ! ? : & ; ` ~ / @ [ ] < > ( ) # * _ | + = % $ { } ^

55

56U

S

BRAVIA Sync Features

About the BRAVIA Sync Features (HDMI connections only) By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable (not supplied), operation is simplified as below: One-Touch Play

With one touch of the following buttons, the connected TV turns on and the input selector on the TV is switched to the player automatically. [/1 N PLAY: Playback starts automatically.

System Power-Off When you turn off the TV using the power button on the TVs remote, the player and HDMI-compatible components turn off automatically.

Theater When you press THEATER, the player automatically switches to the optimum video mode for watching movies. When connected with an AV amplifier (receiver) using an HDMI cable, the speaker output also switches automatically. When connected with a Theater Mode-compatible TV using an HDMI cable, the TVs video mode switches to Theater Mode. Press the button again to return to the original setting.

Language Follow If you change the language for the on- screen display on your TV, the players on- screen display language is also changed after turning the player off and on.

To prepare for the BRAVIA Sync features Set Control for HDMI to On in the System Settings setup (page 76). For details on settings of your TV or other connected components, refer to the operating instructions supplied with the TV or components.

US

BR AVIA Sync Features

z When connecting a Sony TV that is compatible

with the Control for HDMI Easy Setting function using an HDMI cable, the Control for HDMI setting of the player automatically switches to On if the Control for HDMI setting on the connected TV is set to On. Refer to the operating instructions supplied with the TV.

When connecting a Sony TV that is compatible with the BRAVIA Sync features using an HDMI cable, you can control the basic functions of the player with the TVs remote if the Control for HDMI setting on the connected TV is set to On. Refer to the operating instructions supplied with the TV.

b Depending on the connected component, the

Control for HDMI function may not work. Refer to the operating instructions supplied with the component.

When using the HDMI connection, there may be a delay before the playback picture appears on the screen, and the beginning portion of the playback picture may not be displayed.

57

58U

S

Remote Control Features

Operating the Player and Other Components You can operate this player, a TV or AV amplifier using the supplied remote. The remote is factory set to control Sony components. If you have other components listed in the table on page 60, change the remote code to control them (page 60).

1 Press one of the OPERATION CHANGE buttons to select the operation mode.

for the player operation for TV operation for Sony AV amplifier operation

The remote enters the selected mode and the pressed button lights up for one second.

2 Press a button on the remote that is available for the selected mode. The selected mode button lights up.

321

654

THEATER

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

6

32

54

1

OPERATION CHANGE (AMP, TV, BD)

AMP

US

R em

ote Control Features

Available buttons You can use the following buttons to control each component.

b Depending on the manufacturer setting, some

buttons may not work. Depending on the component, control of some or

all buttons may not be possible. When you press buttons not available for the

selected mode, the mode button does not light up.

Buttons BD TV AMP

THEATER z

INPUT z z

AV [/1 z z

[/1 z

Z OPEN/CLOSE z

Number buttons z z z

CLEAR/ (dot) z z

ENTER z z

AUDIO/ FAVORITES z z z

SUBTITLE/CC z z

ANGLE/WIDE z z

TIME z

REPEAT z

SHUFFLE z

ALL DISCS z

DISPLAY z z z

Color buttons z

TOP MENU/ GUIDE z z

POP UP/MENU/ GUI MODE z z

RETURN z z z

OPTIONS/ TOOLS z z z

HOME z z z

B/v/V/b/ z z z

SORT z

GROUP z

. PREV/ NEXT > z z

REPLAY/ ADVANCE z z

m/M z z

N PLAY z z

SCENE SEARCH z

X PAUSE z z

x STOP z z

MUTING z z

VOLUME/ TV VOL z z

DISC SKIP/ TV CH z z

DIMMER z

RENTAL SLOT z

LOAD z

Buttons BD TV AMP

59

60U

S

Changing the Remote Code to Operate Other Components To operate other components by the supplied remote, set the appropriate manufactures code for each operation mode.

b When you replace the batteries of the remote, the code number may be reset to the default setting. Set the appropriate code number again.

1 Press POP UP/MENU while pressing one of the OPERATION CHANGE buttons.

for TV operation for Sony AV amplifier operation for volume control of a TV

(default) or AV Amplifier

The pressed button flashes.

2 While the button is flashing, enter the manufacturers code number using the number buttons, then press ENTER. See Code numbers of controllable components (page 60). Note that the code number for BD differs depending on the command mode set for the player. If you successfully set the manufacturers code, the button will flash twice slowly. If the setting is unsuccessful, the button will flash five times quickly.

Code numbers of controllable components If more than one code number is listed, try entering them one at a time until you find one that works with the component.

For TV mode

For AMP mode

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

Number buttons

POP UP/ MENU

OPERATION CHANGE (AMP, TV, BD)

ENTER

AMP

Manufacturer Code number

Sony 501 (default), 502

Daewoo 503, 506, 515, 544

Emerson 567

Funai 548

GE 503, 509, 510, 544

Goldstar/LG 503, 515, 517, 544, 568

Grundig 533

Hitachi 503, 514, 515, 517, 544, 557, 571

ITT/Nokia 521, 522

JVC 516

Loewe 515, 518

Mitsubishi/MGA 503, 527, 544, 566, 568

NEC 503, 517, 544, 564, 566

Nokia 521, 522, 573, 575

Panasonic 509, 553, 572

Philips 515, 518, 557, 570, 571

Pioneer 509, 526, 551

Radio Shack 503, 510, 527, 565, 567

RCA/Proscan 503, 510, 544

Saba 530, 537, 547, 549, 558

Samsung 503, 515, 517, 544, 557, 566, 569, 571, 574

Sanyo 508, 545, 567

Sharp 517, 535, 565

Telefunken 530, 537, 547, 549, 558

Thomson 530, 537, 547, 549

Toshiba 535, 541, 551

Zenith 543, 567

Manufacturer Code number

Sony 011, 012 (default), 013

US

R em

ote Control Features

For BD mode You can set VOLUME +/ and MUTING *1 to control the volume of either a TV (default) or AV amplifier. Select a code number appropriate to the command mode set for the player. *1 For TVs and Sony AV amplifiers only.

Command mode BD1

Command mode BD2

Command mode BD3

*2 You can control the volume of the TV that you set for TV mode.

Manufacturer Code number

Sony 321, 322, 323

Denon 327, 328, 329

Kenwood 331, 332

Onkyo 324, 325, 326

Panasonic 336, 337

Pioneer 338

Sansui 330

Yamaha 333, 334, 335

(TV) 310*2 (default)

Manufacturer Code number

Sony 341, 342, 343

Denon 347, 348, 349

Kenwood 351, 352

Onkyo 344, 345, 346

Panasonic 356, 357

Pioneer 358

Sansui 350

Yamaha 353, 354, 355

(TV) 311*2 (default)

Manufacturer Code number

Sony 361, 362, 363

Denon 367, 368, 369

Kenwood 371, 372

Onkyo 364, 365, 366

Panasonic 376, 377

Pioneer 378

Sansui 370

Yamaha 373, 374, 375

(TV) 312*2 (default)

61

62U

S

Changing the Command Mode When you have more than one Sony Blu-ray disc/DVD player, the supplied remote may interfere with another player. In this case, change the command mode for this player and the supplied remote to one that differs from the other player. The default command mode for this player and the supplied remote is BD1.

To switch the command mode for the player

1 Press HOME to display the home menu.

2 Select (Setup) using B/b.

3 Select System Settings using V/v, and press .

4 Select Command Mode, and press .

5 Select a command mode (BD1, BD2, or BD3), and press . The display asks for confirmation.

6 Select Yes, and press . The command mode for the player is changed to the one you set in step 5.

To switch the command mode for the remote Set the command mode for the remote so it matches the command mode you set in step 6 above (for the player).

1 Press POP UP/MENU while pressing down BD.

2 While BD is flashing, enter the 3-digit code number using the number buttons, then press ENTER.

z If the command mode for the player does not match the remote, the command mode for the player appears on the front panel display when you try to operate the remote.

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

Number buttons

BD

HOME

POP UP/ MENU

B/V/v/b/

ENTER

Command mode Code number

BD1 310

BD2 311

BD3 312

US

Settings and Adjustm ents

Settings and Adjustments

Using the Settings Display Select (Setup) on the home menu when you need to change the settings of the player.

1 Press HOME.

2 Select (Setup) using B/b.

3 Select the setup category icon to change using V/v, and press . For details on setting options and setup category icons, see Setting list (page 64). Example: Video Settings

4 Set the options.

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

HOME

B/V/v/b/

,continued

63

64U

S

Setting list You can set up the following options. Network Update

You can update and improve the functions of the player. For information about update functions, refer to the following website; http://esupport.sony.com

1 Select Network Update using V/v, and press . The player connects to the network, and the display asks for confirmation.

2 Select OK using B/b, and press . The player starts downloading, then updates the software automatically. When updating finishes, FINISH appears for 5 seconds in the front panel display, then the player automatically turns off.

3 Press [/1 to turn on the player. The player starts up with the updated software.

z The VERSION UP */9 counter (* indicates

the total number of updates performed) in the front panel display also shows update progress.

You can check the current software version by selecting System Information in the System Settings setup (page 78).

The Setup settings remain after updating. The player informs you of newer software version

information when Software Update Notification is set to On (default) (page 77).

b Do not disconnect the AC power cord or network

cable while downloading or updating software. Any operations, including opening the front

cover, are not available while updating. Downloading times may differ depending on the

server provider or line status. When error messages on network connections

appear, check the network settings (see Internet Settings on page 78).

Icon Explanation

Network Update (page 64) Updates the software of the player.

Video Settings (page 65) Makes the video settings according to the type of connecting jacks.

Audio Settings (page 69) Makes the audio settings according to the connection used.

BD/DVD Viewing Settings (page 73) Makes detailed settings for BD/ DVD playback.

Photo Settings (page 76) Makes photo-related settings.

System Settings (page 76) Makes player-related settings.

Network Settings (page 78) Makes detailed Internet and network settings.

Easy Setup (page 79) Re-runs Easy Setup to make basic settings.

Resetting (page 80) Resets the player to the factory defaults.

US

Settings and Adjustm ents

To update the software using an update disc You can update and improve the functions of the player using an update disc provided by Sony dealers or local authorized Sony service facilities.

1 Insert the update disc.

2 Select Other Discs, and press .

3 Select the update disc using V/v, and press . The display asks for confirmation.

4 Select OK, and press . The update progress is displayed in the front panel display. When updating finishes, the player automatically turns off.

5 Press [/1 to turn the player on. The player starts up with the updated software.

z You can check the current software version by

selecting System Information in the System Settings setup (page 78).

The Setup settings remain after updating. For information about other software update

methods, refer to the following website or consult your nearest Sony dealer or local authorized Sony Service facility; http://esupport.sony.com

b Do not disconnect the AC power cord while

updating. Any operations, including front panel buttons, are

not available while updating.

Video Settings The default settings are underlined.

Selects your TV type.

Selects the display configuration for a 4:3 screen picture on a 16:9 wide screen TV.

TV Type

16:9 Select this when connecting to a wide-screen TV or a TV with a wide mode function.

4:3 Select this when connecting to a 4:3 screen TV without a wide mode function.

Screen Format

Original Select this when connecting to a TV with a wide mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV.

Fixed Aspect Ratio

Changes the picture size to fit the screen size at the original picture aspect ratio.

,continued

65

66U

S

Selects the display configuration for playback of 16:9 screen pictures on a 4:3 screen TV (available when TV Type is set to 4:3 and Screen Format is set to Fixed Aspect Ratio).

b Depending on the DVD, Letter Box may be selected automatically instead of Pan & Scan, or vice versa.

Sets the video conversion method for 480p, 720p, 1080i, or 1080p* signals from the HDMI OUT jack or the COMPONENT VIDEO OUT jacks. * HDMI only

Selects the jack type to output video signals (TV Connection Method) and output resolution (HDMI Resolution/Component Resolution).

1 Select Output Video Format in Video Settings, and press .

2 Select the jack type to output video signals using V/v, and press .

b When connecting the HDMI OUT jack and other video output jacks at the same time, select Component Video.

TV Connection Method

3 (Setting HDMI or Component Video only) Select the signal type for the HDMI OUT jack or COMPONENT VIDEO OUT jacks using V/v, and press . When you change the video output resolution, a picture is displayed in the selected resolution for about 30 seconds, then the display asks for confirmation. Follow the on-screen instructions.

The HD indicator lights up when outputting 720p/1080i/1080p video signals.

DVD Aspect Ratio

Letter Box Displays a wide picture with black bands at the top and bottom.

Pan & Scan Displays a full-height picture on the entire screen, with trimmed sides.

Cinema Conversion Mode

Auto Normally select this. The player automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method.

Video The conversion method suited for video-based material will always be selected regardless of the material.

Letter Box

Pan & Scan

Output Video Format

HDMI Outputs signals from the HDMI OUT jack according to the HDMI Resolution setting below.

Component Video

Outputs signals from the COMPONENT VIDEO OUT jacks according to the Component Resolution setting below.

Video or S Video

Outputs signals from the VIDEO OUT VIDEO or S VIDEO jack.

US

Settings and Adjustm ents

b If the picture is distorted or no picture

appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen. If the selected video output resolution is incorrect, no picture will appear on the screen when you press any button within that 30 seconds. In this case, press x on the player for more than 10 seconds to reset the video output resolution to the lowest resolution.

When connecting the HDMI OUT jack and other video output jacks at the same time with Auto or 1080p selected, video signals may only output from the HDMI OUT jack. When connecting other equipment at the same time, press RETURN to return to step 2, and change the TV Connection Method setting.

HDMI Resolution/Component Resolution

Sets to output 1920 1080p/24 Hz video signals when playing film-based materials on BD-ROMs (720p/24 Hz or 1080p/24 Hz). 1920 1080p/24 Hz video signals can be output when all of the following conditions are met. You connect a 1080/24p-compatible TV

using the HDMI OUT jack, Output Video Format is set to HDMI,

and HDMI Resolution is set to Auto or

1080p. The 24P indicator lights up when outputting 1920 1080p/24 Hz video signals.

b No BD-ROM picture appears if the connected TV is not compatible with 1080/24p, and BD-ROM 1080/24p Output is set to On. In this case, press HOME to display the home menu, and change the BD-ROM 1080/24p Output setting.

Auto (HDMI only)

Normally select this. The player outputs signals starting from the highest resolution acceptable by the TV: 1080p > 1080i > 720p > 480p > 480i If the resulting image format is undesirable, try another setting that suits your TV.

480i Outputs 480i video signals.

480p Outputs 480p video signals.

720p Outputs 720p video signals.

1080i Outputs 1080i video signals.

1080p (HDMI only)

Outputs 1080p video signals.

BD-ROM 1080/24p Output

Auto Outputs 1920 1080p/ 24 Hz video signals only when connecting a 1080/ 24p-compatible TV using the HDMI OUT jack.

On Outputs 1920 1080p/ 24 Hz video signals regardless of the connected TV type.

Off Select this when your TV is not compatible with 1080/ 24p video signals.

,continued

67

68U

S

Sets the color for video signals output from the HDMI OUT jack. Select the setting that matches the connected TV type.

Sets Deep Color (color depth) for video signals output from the HDMI OUT jack. The color depth is indicated by the number of bits, and more colors can be reproduced as the value increases. The player supports a color depth of up to 12 bits. Connecting the player and a TV that supports Deep Color allows for more accurate color reproduction than when connecting it to a TV that does not support Deep Color.

Sets whether to use the Super Bit Mapping (only for video signals output from the HDMI OUT jack).

Sets whether to send xvYCC information to the connected TV. Combining xvYCC-compatible video with a TV that supports x.v.Color display accurately reproduces object colors present in nature.

Sets the picture mode for DVD playback pause status. For BD-ROMs, Pause Mode automatically switches to Auto.

If the video coaxial cable used to connect the COMPONENT VIDEO OUT jacks of the player and your TV is too long, 1080i/720p signals are weakened during transmission over the cable (high frequency transmission cable loss). This function compensates for such high frequency transmission cable loss.

b Performance and features are not guaranteed. If your type of connecting cables or connectors

differs from those recommended, optimum performance may not be achieved.

If settings are higher than those recommended, fine details on the screen may become too harsh.

YCbCr/RGB (HDMI)

Auto Automatically detects the connected TV type, and switches to the matching color setting.

YCbCr (4:2:2) Outputs YCbCr 4:2:2 video signals.

YCbCr (4:4:4) Outputs YCbCr 4:4:4 video signals.

RGB (16-235) Select this when connecting to a device that only supports RGB limited range.

RGB (0-255) Select this when connecting to an RGB (0-255) device.

HDMI Deep Color Output

Auto Normally select this.

12bit Outputs 12bit video signals.

10bit Outputs 10bit video signals.

Off Select this when the picture is unstable or colors appear unnatural.

SBM

On Smoothly reproduces the video image signal. Normally select this.

Off Turns off the function.

x.v.Color Output

Auto Normally select this.

Off Select this when the picture is unstable or colors appear unnatural.

Pause Mode

Auto Normally select this. Dynamic moving pictures appear without blurring.

Frame Displays static pictures at high resolution.

Component output compensation

Off Turns off the function.

1 ~ 7 Select the appropriate numeric value depending on the length of the connected coaxial cable. The compensation amount increases by approximately 0.4 dB (at 30 MHz) for each step increase.

US

Settings and Adjustm ents

Audio Settings The default settings are underlined.

Selects the jack type to output audio signals. 2-channel linear PCM signals are output at 48 kHz maximum from output jacks other than the priority jacks.

To obtain the best possible surround sound, set for the type of speakers you are using, and their distance from your listening position, then use the test tone to adjust the volume and the balance of the speakers. This setting is available when Audio Output Priority is set to Multi Channel Analog.

To set the speakers

1 Select Speaker Settings in Audio Settings, and press .

2 Select Size, Distance, and press .

3 Select a setup item using V/v, and press .

4 Select and adjust settings using V/v, and then pressing .

Size Selects the size of the speakers. Front

Center

Surround

Surround Back

Audio Output Priority

HDMI Outputs audio signals from the HDMI OUT jack.

Coaxial/ Optical

Outputs audio signals from the DIGITAL OUT (OPTICAL/COAXIAL) jack.

Multi Channel Analog

Select this when connecting an AV amplifier (receiver) via the MULTI CHANNEL OUTPUT jacks.

Stereo Analog Outputs audio signals from the AUDIO OUT (L/R) jacks.

Speaker Settings

Large Normally select this position.

Small Select this when the speakers cannot reproduce adequate low frequencies.

Large Normally select this position.

Small Select this when the speaker cannot reproduce adequate low frequencies.

None Select this if you do not connect a center speaker.

Large Normally select this position.

Small Select this when the speakers cannot reproduce adequate low frequencies.

None Select this if you do not connect surround speakers.

Large Normally select this position.

Small Select this when the speakers cannot reproduce adequate low frequencies.

None Select this if you do not connect surround back speakers.

,continued

69

70U

S

Subwoofer

b Depending on the settings of other speakers, the

subwoofer may output excessive sound. If you play a BD or DVD that does not have

subwoofer signal recorded, no sound will be produced from the subwoofer, even if Subwoofer is set to Yes.

Since subwoofer use is set as the player default setting, Subwoofer cannot be set to None when Front is set to Small.

When connecting front speakers that cannot reproduce adequate low frequencies and a subwoofer is not connected, set Front to Large, and Subwoofer to None.

Distance Sets the distance from your listening position to the speakers. Set the distance to your front speakers in Front first (A = 4 to 50 feet). Then adjust the values in Center (center speaker B), Surround (surround speakers C), Surround Back (surround back speakers D), and Subwoofer (E) to reflect the actual distance to your center speaker, surround speakers, surround back speakers, and subwoofer.

Change the Distance setting each time you move the speakers. Start from the front speakers.

To adjust the speaker level

1 Select Speaker Settings in Audio Settings, and press .

2 Select Test Tone using V/v, and press .

3 Select On using V/v, and press . You will hear the test tone from each speaker in sequence.

4 From your listening position, adjust the value of Level using B/V/v/b. The test tone is emitted from the selected speaker.

5 Press when you finish adjusting.

6 Select Test Tone using V/v, and press .

7 Select Off using V/v, and press .

Yes Select this if you connect a subwoofer to output the LFE (low frequency effect) signals from the subwoofer.

None Select this if you do not connect a subwoofer.

Front Set this between 4 and 50 feet in 1 foot increments. (4 ~ 10 ~ 50 [ft])

Center Set this within 5 and +2 feet of the Front setting in 1 foot increments. For example, if Front is set to 5 feet, Center can be set between 0 and 7 feet. (0 ~ 10 ~ 52 [ft])

Surround Set this within 16 and +2 feet of the Front setting in 1 foot increments. For example, if Front is set to 16 feet, Surround can be set between 0 and 18 feet. (0 ~ 10 ~ 52 [ft])

Surround Back

Set this within 16 and +2 feet of the Front setting in 1 foot increments. For example, if Front is set to 16 feet, Surround Back can be set between 0 and 18 feet. (0 ~ 10 ~ 52 [ft])

Subwoofer Set this within 5 and +2 feet of the Front setting in 1 foot increments. For example, if Front is set to 5 feet, Subwoofer can be set between 0 and 7 feet. (0 ~ 10 ~ 52 [ft])

US

Settings and Adjustm ents

z To adjust the level without listening to the test tone, select Level in step 2 and press , then adjust the level using V/v, and press .

Level You can vary the level of each speaker as follows. Be sure to set Test Tone to On for easy adjustment.

Test Tone

Selects the signal type for the HDMI OUT jack.

b Select 2ch PCM when connecting a TV or an AV amplifier (receiver) that does not support Dolby Digital or DTS, otherwise noise or no sound may result.

Selects whether to mix or not mix interactive audio and secondary audio (commentary) when playing a BD that contains such audio.

b PCM 96 kHz and PCM 192 kHz audio signals are output as PCM 48 kHz audio signals when BD Audio Setting is set to Mix.

Lowers the audio output level to prevent sound distortion.

b Audio ATT does not affect the output from the HDMI OUT jack or DIGITAL OUT (OPTICAL/ COAXIAL) jack.

Front Left Front Right

Adjust the level of the front speakers (12 dB to 0 dB, 0.5 dB increments). (0 [dB])

Center Adjust the level of the center speaker (12 dB to 0 dB, 0.5 dB increments). (0 [dB])

Surround Left Surround Right

Adjust the level of the surround speakers (12 dB to 0 dB, 0.5 dB increments). (0 [dB])

Surround Back Left Surround Back Right

Adjust the level of the surround back speakers (12 dB to 0 dB, 0.5 dB increments). (0 [dB])

Subwoofer Adjust the level of the subwoofer (12 dB to 0 dB, 0.5 dB increments). (0 [dB])

On The player emits a test tone in sequence from the MULTI CHANNEL OUTPUT jacks to adjust the sound level from each speaker. When you select one of the Speaker Settings items, the test tone is emitted from the selected speaker.

Off The test tone is not emitted from the speakers.

Audio (HDMI)

Auto Normally select this. Outputs audio signals according to the status of the connected HDMI device.

2ch PCM Downmixes to 2-channel Linear PCM signals before outputting from the HDMI OUT jack.

BD Audio Setting

Mix Mixes the interactive and secondary audio as primary audio.

Direct Outputs the primary audio only.

Audio ATT

On Enables Audio Attenuation.

Off Disables Audio Attenuation.

,continued

71

72U

S

Selects the audio signals output when playing Dolby Digital discs. This setting affects the output from the DIGITAL OUT (COAXIAL/OPTICAL) jack.

Selects the audio signals output when playing DTS discs. This setting affects the output from the DIGITAL OUT (COAXIAL/ OPTICAL) jack.

Selects the maximum sampling frequency for the PCM signals output from the DIGITAL OUT (OPTICAL/COAXIAL) jack.

b If you select 96kHz/24bit when an AV

amplifier (receiver) that does not support 96 kHz is connected, no sound or a loud sound may result.

48kHz/96kHz PCM is not effective when Audio Output Priority is set to HDMI, Multi Channel Analog, or Stereo Analog.

Selects the dynamic range (compression level of the sound) setting when playing a BD or DVD that conforms to Audio DRC.

b Audio DRC is effective only when playing

Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio signals.

When Dolby Digital is set to Dolby Digital in the Audio Settings setup (page 72), Audio DRC has no effect on the audio output from the DIGITAL OUT (OPTICAL/COAXIAL) jack. However, this excludes the following cases. when BD Audio Setting is set to Mix when

playing a BD. when Audio Output Priority is set to

HDMI, Multi Channel Analog, or Stereo Analog.

Dolby Digital

Downmix PCM

Converts to output Linear PCM signals. Select this when connecting an audio device without a built-in Dolby Digital decoder.

Dolby Digital Select this when connecting an audio device with a built- in Dolby Digital decoder.

DTS

Downmix PCM

Converts to output Linear PCM signals. Select this when connecting to an audio device without a built-in DTS decoder.

DTS Select this when connecting to an audio device with a built-in DTS decoder.

48kHz/96kHz PCM

48kHz/16bit Outputs audio signals of 96 kHz sampling as 48 kHz/ 16 bit.

96kHz/24bit Outputs audio signals of 96 kHz sampling as 96 kHz/ 24 bit. However, the signals will be output as 48 kHz/ 16 bit if the source is copy- protected.

Audio DRC

Auto Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the Standard level.

Standard Performs playback at a compression level between TV Mode and Wide Range.

TV Mode Sounds are compressed heavily. Low sounds are easier to hear.

Wide Range No compression works. A more dynamic sound is produced.

US

Settings and Adjustm ents

Sets the downmix method of multi-channel to two-channel sound.

b Downmix has no effect on the bitstream audio output from the DIGITAL OUT (OPTICAL/ COAXIAL)/HDMI OUT jack.

BD/DVD Viewing Settings The default settings are underlined.

Selects the default menu language for BD- ROMs or DVD VIDEOs. When you select Select Language Code, the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 91).

Selects the default track language for BD- ROMs or DVD VIDEOs. When you select Original, the language given priority in the disc is selected. When you select Select Language Code, the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 91).

Selects the default subtitle language for BD- ROMs or DVD VIDEOs. When you select Select Language Code, the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 91).

Playback of some BD-ROMs can be limited according to the age of the user. Scenes may be blocked or replaced with different scenes.

1 Select BD Parental Control in BD/ DVD Viewing Settings, and press

.

2 Enter your four-digit password using the number buttons.

3 Select OK, and press .

Downmix

Dolby Surround

Outputs the Dolby Surround (Pro Logic) signals in 2 channels. Select this when connecting an audio device that supports Dolby Surround (Pro Logic).

Normal Outputs audio signals without Dolby Surround (Pro Logic) effect. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic).

BD/DVD Menu

Audio

Subtitle

BD Parental Control

,continued

73

74U

S

4 Select the age restriction, and press .

The lower the value, the stricter the limitation. If you select Select Age Restriction, you can enter a value from 0 to 255 using B/V/v/b or the number buttons. To cancel the Parental Control setting,

select No Restrictions.

z You can change the password (see Password on page 75).

b The password is not reset even if you reset the

player (page 80). Keep a note of your password. Discs that do not have the Parental Control

function cannot be limited on this player. Depending on the disc, you may be asked to

change the Parental Control level while playing the disc. In this case, enter your password, then change the level.

When 255 is selected in Select Age Restriction, the Parental Control setting is canceled.

To play restricted BDs When you play a restricted BD, change the setting or enter the age in Select Age Restriction.

Playback of some DVD VIDEOs can be limited according to the age of the users. Scenes may be blocked or replaced with different scenes.

1 Select DVD Parental Control in BD/ DVD Viewing Settings, and press

.

2 Enter your four-digit password using the number buttons.

3 Select OK, and press .

4 Select a level, and press . The lower the value, the stricter the limitation. To cancel the Parental Control setting,

select No Restrictions.

z You can change the password (see Password on page 75).

b The password is not reset even if you reset the

player (page 80). Keep a note of your password. Discs that do not have the Parental Control

function cannot be limited on this player. Depending on the disc, you may be asked to

change the Parental Control level while playing the disc. In this case, enter your password, then change the level.

To play restricted DVDs When you play a restricted DVD, the display for entering your password appears on the screen. Enter your four-digit password using the number buttons, and press ENTER. Playback starts.

Playback of some BD-ROMs or DVD VIDEOs can be limited according to geographic area. Scenes may be blocked or replaced with different scenes.

1 Select Parental Control Region Code in BD/DVD Viewing Settings, and press .

2 Enter your four-digit password using the number buttons.

3 Select OK, and press .

4 Select the area restriction, and press .

When you select Select Region Code, the display for entering the region code appears. Enter the code for the area restriction by referring to Parental Control/Area Code (page 91).

z You can change the password (see Password on page 75).

DVD Parental Control

Parental Control Region Code

US

Settings and Adjustm ents

b The password is not reset even if you reset the

player (page 80). Keep a note of your password. Discs that do not have the Parental Control

function cannot be limited on this player. Depending on the disc, you may be asked to

change the Parental Control level while playing the disc. In this case, enter your password, then change the level.

Sets or changes the password for the Parental Control function. A password allows you to set a restriction on BD-ROM or DVD VIDEO playback. If necessary, you can differentiate the restriction levels for BD- ROMs and DVD VIDEOs.

1 Select Password in BD/DVD Viewing Settings, and press .

2 Enter your four-digit password using the number buttons.

3 Select OK, and press .

To change the password

1 After step 3, enter a new password using the number buttons.

2 Select OK, and press .

b The password is not reset even if you reset the player (page 80). Keep a note of your password.

Selects the layer priority when playing a Hybrid Disc. To change the setting, turn the player off and on again.

Sets whether to allow Internet connections from the contents of a BD (in BDMV mode) being played. Network connections and settings are required when using this function (page 78).

When you play BDs*1/DVDs*2, the player stores picture settings for each disc, letting you play the same disc with the same settings later. The player can store picture settings for up to 50 discs.

*1 BD-ROMs and BD-REs/BD-Rs in BDMV mode *2 DVD VIDEOs and DVD-RWs/DVD-Rs/

DVD+RWs/DVD+Rs in video mode

b When settings exceed 50, the player

automatically erases the oldest settings. When connected to a Theater Mode-compatible

Sony TV using an HDMI cable, set the TVs video mode to a mode other than Theater.

Password

Hybrid Disc Playback Layer

BD Plays BD layer.

DVD/CD Plays DVD or CD layer.

BD Internet Connection

Allow Normally select this.

Do not allow Prohibits Internet connection.

Playback Memory

On Stores picture settings for each disc.

Off Turns off the function.

75

76U

S

Photo Settings The default setting is underlined.

Changes the slideshow speed.

System Settings The default settings are underlined.

Selects your language for the player on- screen displays.

Adjusts the lighting of the front panel display.

Communicates with an external device via RS232C or a network.

Slideshow Speed

Fast Photos change rapidly.

Normal Photos change at normal speed.

Slow Photos change slowly.

OSD

Dimmer

Bright Bright lighting.

Dark Low lighting.

Off Turns off the lighting during playback. Low lighting other than during playback.

Control for HDMI

On Allows you to use the Control for HDMI function (page 56).

Off Turns off the function.

Custom Installation Control

RS232C Communicates with an external device via RS232C.

Network Communicates with an external device via a network.

Off Does not communicate with external device.

US

Settings and Adjustm ents

b When Quick Start Mode is set to On, power consumption will be higher than when

Quick Start Mode is set to Off and the ventilation fan may turn on depending on the

surrounding temperature.

The player automatically turns off if you do not press any of the buttons on the player or remote for more than 30 minutes, unless you are playing BDs/DVDs/CDs/photo files or are updating software.

The screen saver image appears when you do not use the player for more than 15 minutes while an on-screen display, such as the home menu, is displayed on your TV screen. The screen saver image helps prevent your display device from becoming damaged (ghosting).

Changes the command mode of the player if other equipment is assigned the same command mode. Change the command mode of the supplied remote to match the player. For details, see Changing the Command Mode (page 62).

Informs you of newer software version information. Network connections and settings are required when using this function (page 78).

You can lock the front cover to prevent it being opened by mistake.

When loading the disc, you can acquire disc information from the Gracenote Database. Network connections and settings are required when using this function (page 78).

Quick Start Mode

On Shortens the startup time when turning on the player.

Off The default setting.

Auto Standby

On Turns on the Auto Standby function.

Off Turns off the function.

Auto Display

On Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc.

Off Displays information only when you press DISPLAY.

Screen Saver

On Turns on the screen saver function.

Off Turns off the function.

Command Mode

BD1 The default command mode of the player.

BD2 Select this if the default command mode conflicts with other equipment.

BD3 Select this if the default command mode conflicts with other equipment.

Software Update Notification

On Sets the player to inform you of newer software version information (page 64).

Off Turns off the function.

Child Lock

On Locks the front cover.

Off Unlocks the front cover.

Accessing Gracenote

On Accesses the Gracenote Database.

Off Does not access the Gracenote Database.

,continued

77

78U

S

Displays the players software version information and the MAC address.

Network Settings

These items are necessary when you connect to the Internet via a network cable. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router. The items that need to be set may differ, depending on the Internet service provider or the router. For details, refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router.

1 Select Internet Settings in Network Settings, and press .

2 Select IP Address Acquisition, and press .

3 Select an item, and press .

When you select Use DHCP If you set DNS Server Auto Acquisition to Off, set the following item: DNS Server (Primary)/DNS Server

(Secondary) When you select Use Static IP

Address Set the following items: IP Address Subnet Mask Default Gateway DNS Server (Primary)/DNS Server

(Secondary)

System Information

Internet Settings

Use DHCP Select this when DHCP (Dynamic Host Configuration Protocol) server settings are available from your Internet service provider. The network settings necessary for the player will be assigned automatically.

Use Static IP Address

Set the IP address manually according to your network environment.

US

Settings and Adjustm ents

b When you set the DNS Server (Primary)/ DNS Server (Secondary) addresses manually, enter the DNS Server (Primary) address. Otherwise, the Internet Settings will be set incorrectly.

4 If your ISP has a specific proxy server setting, select Proxy Settings using V/v, and press . The Proxy Settings display appears. If the proxy server does not have a specific setting, go to step 8.

5 Set Use of Proxy Server to On.

6 Select Proxy Server and Port, and enter the settings. To enter the proxy server, see Entering characters (page 54).

7 Press RETURN.

8 Select Network Diagnostic using V/ v, and press .

9 Select Start, and press .

10 Check that the message Network connections are correct. appears. The setup is finished. If the message does not appear, follow the on-screen messages.

Easy Setup Re-runs Easy Setup to make the basic settings.

1 Select Easy Setup, and press .

2 Select Start using B/b, and press .

3 Follow the instructions for Step 7: Easy Setup (page 31) from step 4.

79

80U

S

Resetting You can return a specific group of player settings to their factory defaults. All the settings within the group will be reset.

1 Select Resetting, and press .

2 Select Reset to Factory Default Settings, and press .

3 Select the settings you want to reset to default, and press . The display asks for confirmation. You can reset the following settings: Video Settings Audio Settings BD/DVD Viewing Settings Photo Settings System Settings Network Settings All Settings

4 Select Start using B/b, and press .

b When All Settings is selected in step 3,

all settings within (Setup) are reset. A/V Settings that can be adjusted by pressing

OPTIONS during playback (page 38) are not reset.

The password for BD Parental Control or DVD Parental Control in BD/DVD Viewing Settings (page 73) is not reset.

US

Additional Inform ation

Additional Information

Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

The power does not turn on. , Check that the AC power cord is connected

securely. , It takes a short while before the player turns

on.

The message A new software version has been found on the network. Perform version update? appears on the screen when turning the player on. , See Network Update (page 64) to update

the player to a newer software version.

When turning the player on, appears on the screen, and SYSTEM ERROR appears in the front panel display. , Disconnect the power cord and wait for a

while, then re-connect the power cord. If the condition persists, contact your nearest Sony dealer or local authorized Sony service facility.

The disc does not play. , The disc is dirty. , The disc is reversed. Insert the disc with the

playback side facing left. , The disc is skewed. , You are attempting to play a disc with a

format that cannot be played back by this player (page 87).

, The region code on the BD or DVD does not match the player.

, The player cannot play a recorded disc that is not correctly finalized (page 87).

Power

Disc

,continued

81

82U

S

, Disc playback is limited according to user age. To change the restriction, you need the BD Parental Control or DVD Parental Control password in BD/DVD Viewing Settings (page 73). Keep a note of your password. The password is not reset even if you reset the player (page 80). If you forget the password, contact our Customer Information Service Center.

See also Connecting to an HDMI jack (page 19) when connecting equipment using an HDMI cable.

There is no picture/picture noise appears. , Check that all the connecting cables are

securely connected. , Check whether the connecting cables are

damaged. , Check the connection to your TV (page 18)

and switch the input selector on your TV so that the signal from the player appears on the TV screen.

, When playing a double-layer BD/DVD, the video and audio may be momentarily interrupted at the point where the layers switch.

No picture appears when the video output resolution selected in Output Video Format is incorrect. , Press x on the player for more than 10

seconds to reset the video output resolution to the lowest resolution.

The picture does not fill the screen, even though the aspect ratio is set in DVD Aspect Ratio under Video Settings. , The aspect ratio of the disc is fixed on your

DVD (page 66).

Video signals are not output from the jacks, other than from the HDMI OUT jack, when connecting the HDMI OUT jack and other video output jacks at the same time. , Set Output Video Format to Component

Video in the Video Settings setup (page 66).

The dark area of the picture is too dark/the bright area is too bright or unnatural. , Set Picture Quality Mode to Standard

(default) (see Adjusting picture and sound for videos on page 41).

The picture is not output correctly. , Check the Output Video Format settings

in the Video Settings setup (page 66).

No BD-ROM picture appears. , Check the BD-ROM 1080/24p Output

setting in the Video Settings setup (page 67).

See also Connecting to an HDMI jack (page 24) when connecting equipment using an HDMI cable.

There is no sound. , Check that all the connecting cables are

securely connected. , Check whether the connecting cables are

damaged. , Check the connection to your AV amplifier

(receiver) (page 23) and switch the input selector on your AV amplifier (receiver) so that the audio signals of the player are output from your AV amplifier (receiver).

, The player is in scan mode. , If the audio signal does not come through

the DIGITAL OUT (OPTICAL/ COAXIAL)/HDMI OUT jack, check the audio settings (page 69).

The sound is not output correctly. , Check the Audio Output Priority setting

in the Audio Settings setup (page 69). , Check the speaker settings (page 69).

The volume is low. , The volume is low on some BDs or DVDs. , Try setting Audio DRC to TV Mode in

the Audio Settings setup (page 72). , Set Audio ATT to Off in the Audio

Settings setup (page 71).

Picture

Sound

US

Additional Inform ation

The HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, and DTS-HD Master Audio) is not output by bitstream. , Set BD Audio Setting to Direct in the

Audio Settings setup (page 71). , Check that the connected AV amplifier

(receiver) is compatible with each HD Audio format.

The interactive audio is not output. , Set BD Audio Setting to Mix in the

Audio Settings setup (page 71).

There is no picture or no sound when connected to the HDMI OUT jack. , Try the following: 1Turn the player off

and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect an HDMI cable.

There is no picture or picture noise appears when connected to the HDMI OUT jack. , The HDMI OUT jack is connected to a DVI

device that does not support copyright protection technology.

, If the HDMI OUT jack is used for video output, changing the video output resolution may solve the problem (page 66).

No sound is output from the HDMI OUT jack. , The HDMI OUT jack is connected to a DVI

device (DVI jacks do not accept audio signals).

The sound is not output correctly when connected to the HDMI OUT jack. , The device connected to the HDMI OUT

jack does not support the audio format of the player. Check the audio settings (page 69).

The display language on the screen switches automatically when connected to the HDMI OUT jack. , When Control for HDMI is set to On

(page 76), the display language on the screen automatically switches according to the language setting of the connected TV (if you change the setting on your TV, etc.).

The Control for HDMI function does not work (BRAVIA Sync). , Check that the AC power cord of the

connected component is securely connected.

, If the HDMI indicator does not appear in the front panel display, check the HDMI connection (page 19, 24).

, Set Control for HDMI to On (page 76). , Make sure that the connected component is

compatible with the Control for HDMI function. For details, refer to the operating instructions supplied with the component.

, Check the connected components setting for the Control for HDMI function. For details, refer to the operating instructions supplied with the component.

, If you change the HDMI connection, turn the player off and on again.

, If power failure occurs, set Control for HDMI to Off, then set Control for HDMI to On (page 76).

, For details on the Control for HDMI function, see About the BRAVIA Sync Features (HDMI connections only) (page 56).

, If you connect the player to a TV through an AV amplifier (receiver) that is not compatible with the Control for HDMI function, you may be unable to control the TV from the player.

The external memory is not recognized. , Try the following: 1Turn the player off. 2Align the V mark of the EXT slot with the V mark on the external memory (in case of USM1GH/USM2GH), and insert the external memory. 3Turn the player on. 4Check that the EXT indicator lights up in the front panel display.

HDMI

External memory (local storage)

,continued

83

84U

S

Bonus contents or other data that are contained in a BD-ROM cannot be played. , Try the following: 1Remove the disc. 2Turn the player off. 3Remove and re- insert the external memory (page 28). 4Turn the player on. 5Check that the EXT indicator lights up in the front panel display. 6Insert the BD-ROM with BonusView/BD-Live.

A message indicating that the local storage does not have enough space appears on the screen. , Delete unnecessary data in the external

memory (page 40).

The remote does not function. , The batteries in the remote are weak

(page 31). , The distance between the remote and the

player is too far. , The remote is not pointed at the remote

sensor on the player. , Different command modes are set for the

player and remote. Set the same command mode (page 62).

The file name is not correctly displayed. , The player can only display ISO 8859-1-

compliant character formats. Other character formats may be displayed differently.

, Depending on the writing software used, the input characters may be displayed differently.

The disc does not start playing from the beginning. , Resume Play is on (page 38).

Some functions such as Stop or Search cannot be performed. , Depending on the disc, you may not be able

to do some of the operations above. Refer to the operating manual supplied with the disc.

The language for the soundtrack/subtitle or angles cannot be changed. , Try using the BDs or DVDs menu instead

of the direct selection button on the remote (page 39).

, Multi-lingual tracks/subtitles or multi- angles are not recorded on the BD or DVD being played.

, The BD or DVD prohibits the changing of the language for the sound track/subtitle or angles.

The front cover does not open and LOCKED appears in the front panel display. , When LOCKED appears, the player is

locked. To cancel the Child Lock, hold down X on the player until UNLOCK appears in the front panel display (page 10).

The player does not respond to any button. , Moisture has condensed inside the player

(page 3). , Hold down [/1 on the player for more than

10 seconds until the indicators in the front panel display turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord.

Operation

US

Additional Inform ation

Self-Diagnosis Function When the self-diagnosis function is activated to prevent the player from malfunctioning, an error code appears in the front panel display, or just appears without any messages on the entire screen. In these cases, check the following.

When an error code appears in the front panel display

When just appears without any messages on the entire screen Depending on the situation, the remedy in Power of Troubleshooting (page 81) may solve the problem. If any problem persists, contact your nearest Sony dealer or local authorized Sony service facility.

Error code Corrective action

Exxxx SYS ERR

Contact your nearest Sony dealer or local authorized Sony service facility and give the error code. xxxx represents an error code (number).

FAN ERR Check that the ventilation holes on the rear of the player are not blocked.

Place the player in a location with adequate ventilation to prevent heat build-up in the player.

85

86U

S

Playable Discs

*1 MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

*2 JPEG format conforming to UDF (Universal Disk Format).

Notes about BD-ROM compatibility Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. For details, see page 89.

Type Disc Logo Icon used in this manual Characteristics

Blu-ray Disc BD-ROMs and BD-REs/BD-Rs in BDMV and BDAV mode, and DL discs

DVD VIDEO Discs such as movies that can be purchased or rented

DVD

DVD+RWs/DVD+Rs in +VR mode or DVD-RWs/DVD-Rs in video and VR mode, and DVD+R DL/DVD-R DL discs

DATA DVD DVD+RWs/DVD+Rs/DVD-RWs/ DVD-Rs containing MP3*1 audio tracks and JPEG*2 image files

CD Music CDs or CD-Rs/CD-RWs in music CD format

DATA CD CD-Rs/CD-RWs containing MP3*1 audio tracks and JPEG*2 image files

BD

DVD

DVD

DATA DVD

CD

DATA CD

US

Additional Inform ation

Discs that cannot be played BDs with cartridge DVD-RAMs HD DVDs DVD Audio discs PHOTO CDs Data part of CD-Extras VCDs/Super VCDs HD layer on Super Audio CDs DualDiscs BD-ROMs/DVD VIDEOs with a different

region code (page 87). A disc recorded in a color system other than

NTSC, such as PAL (this player conforms to the NTSC color system).

8cm discs

Note on playback operations of BDs/DVDs Some playback operations of BDs/DVDs may be intentionally set by software producers. Since this player plays BDs/ DVDs according to the disc contents the software producers designed, some playback features may not be available. Refer to the instructions supplied with the BDs/DVDs.

Region code (BD-ROM/DVD VIDEO only) Your player has a region code printed on the rear of the unit and will only play BD-ROMs/ DVD VIDEOs (playback only) labeled with identical region codes. This system is used to protect copyrights. DVD VIDEOs labeled will also play on this player. Depending on the BD-ROM/DVD VIDEO, no region code may be indicated even though playing the BD-ROM/DVD VIDEO is prohibited by area restrictions.

b Notes about BD-REs/BD-Rs, DVD+RWs/

DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/ CD-RWs Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device. Note that some playback functions may not work with some DVD+RWs/ DVD+Rs, even if they have been correctly finalized. In this case, view the disc using normal playback.

Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Various music discs encoded with copyright protection technologies are being marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Note on DualDiscs Using a DualDisc with this product may scratch or abrade the surface of the video side of the DualDisc and affect its playability and should not be used with this product.

Note about double-layer BDs/DVDs The playback pictures and sound may be momentarily interrupted when the layers switch.

Note about BD-REs/BD-Rs This player supports Ver. 2.1 BD-RE and Ver. 1.1 and 1.2 BD-R including organic pigment type BD-R (LTH type).

Note about DTS 5.1 MUSIC DISCs This player can play DTS 5.1 MUSIC DISCs. Audio signals are output in the formats specified under the Audio Output Signals table on page 89.

ALL

Region code

87

88U

S

Video Output Resolution Output resolution differs depending on the Output Video Format setting in the Video Settings setup (page 65).

*1 Protected contents on DVDs are output at 480p resolution.

*2 No picture appears when outputting at 1080/24p resolution.

When Output Video Format is set to Video or S Video

480i video signals are output from the VIDEO OUT VIDEO/S VIDEO or COMPONENT VIDEO jack, and 480p video signals are output from the HDMI OUT jack.

Resolution setting

When Output Video Format is set to HDMI

When Output Video Format is set to Component Video

VIDEO OUT VIDEO/

S VIDEO jack

COMPONENT VIDEO jack

HDMI OUT jack

VIDEO OUT VIDEO/

S VIDEO jack

COMPONENT VIDEO jack

HDMI OUT jack

480i 480i 480i 480i 480i 480i 480i

480p 480i 480i 480p 480i 480p 480p

720p 480i 480i 720p 480i 720p*1 720p*1

1080i 480i 480i 1080i 480i 1080i*1 1080i*1

1080p 480i*2 480i*2 1080p unavailable unavailable unavailable

US

Additional Inform ation

Audio Output Signals The audio output differs as follows, depending on the source, output jack, and the selected settings.

*1 When Audio Output Priority is set to Stereo Analog, LPCM 2ch signals are output from each jack.

*2 When Audio Output Priority is set to HDMI, Coaxial/Optical or Multi Channel Analog, LPCM 2ch signals are output from jacks other than the selected jack.

*3 Auto: when Audio (HDMI) is set to Auto in the Audio Settings setup (page 71). 2ch PCM: when Audio (HDMI) is set to 2ch PCM in the Audio Settings setup (page 71).

*4 Bitstream: when Dolby Digital is set to Dolby Digital or DTS is set to DTS in the Audio Settings setup (page 72).

*5 When BD Audio Setting is set to Direct, audio recorded by the source is output by bitstream. However, this audio may be output as follows depending on the audio formats supported by the AV amplifier (receiver). When the AV amplifier (receiver) does not

support HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) but supports Multi-ch LPCM, up to LPCM 7.1ch is output.

When the AV amplifier (receiver) does not support HD Audio or Multi-ch LPCM but supports Dolby Digital/DTS, a Dolby Digital or DTS bitstream is output.

When the AV amplifier (receiver) does not support HD Audio, Multi-ch LPCM or Dolby Digital/DTS, LPCM 2ch is output.

*6 The 2-channel or less-channel primary/ secondary audio signals are output as LPCM 2ch signals.

b When outputting 480i/480p video signals from the HDMI OUT jack, Dolby TrueHD and DTS-HD Master Audio are output as LPCM, Dolby Digital, or DTS bitstream signals even if BD Audio Setting is set to Direct in the Audio Settings setup (page 71).

Jacks/ settings*1

Disc/source

Digital Analog

HDMI OUT jack*2 DIGITAL OUT (OPTICAL/ COAXIAL) jacks*2

MULTI CHANNEL OUTPUT jacks*2

AUDIO OUT (L/R) jacksAuto*3 2ch PCM*3 Bitstream*4 PCM

BD LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch 2ch

LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 2ch LPCM 2ch 5.1ch 2ch

LPCM 7.1ch LPCM 7.1ch LPCM 2ch LPCM 2ch LPCM 2ch 7.1ch 2ch

Dolby Digital LPCM 5.1ch*5 LPCM 2ch Dolby Digital/

LPCM 2ch*6 LPCM 2ch 5.1ch 2ch

Dolby Digital Plus

LPCM 7.1ch*5 LPCM 2ch Dolby Digital/

LPCM 2ch*6 LPCM 2ch 7.1ch 2ch

Dolby TrueHD LPCM 7.1ch*5 LPCM 2ch Dolby Digital/

LPCM 2ch*6 LPCM 2ch 7.1ch 2ch

DTS LPCM 5.1ch*5 LPCM 2ch DTS/

LPCM 2ch*6 LPCM 2ch 5.1ch 2ch

DTS-HD High Resolution Audio

LPCM 7.1ch*5 LPCM 2ch DTS/

LPCM 2ch*6 LPCM 2ch 7.1ch 2ch

DTS-HD Master Audio

LPCM 7.1ch*5 LPCM 2ch DTS/

LPCM 2ch*6 LPCM 2ch 7.1ch 2ch

DVD LPCM LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch 2ch

Dolby Digital Dolby Digital LPCM 2ch Dolby Digital LPCM 2ch 5.1ch 2ch

DTS DTS LPCM 2ch DTS LPCM 2ch 5.1ch 2ch

CD LPCM LPCM LPCM 2ch LPCM 2ch LPCM 2ch 2ch 2ch

DTS 5.1 MUSIC DISC DTS LPCM 2ch DTS LPCM 2ch 5.1ch 2ch

89

90U

S

Specifications System Laser: Semiconductor laser

Outputs (Jack name:

Jack type/Output level/Load impedance) Analog Audio Output:

Stereo Output: Phono jack/2 Vrms/ 10 kilohms Multi Channel Output: Phono jack/2 Vrms/ 10 kilohms

Digital Audio Output: Optical Output: Optical output jack/ 18 dBm (wave length 660 nm) Coaxial Output: Phono jack/0.5 Vp-p/ 75 ohms

Analog Video Output Component Output (Y/PB/PR): Phono jack/ Y: 1.0 Vp-p/PB, PR: 0.7 Vp-p/75 ohms Composite Output: Phono jack/1.0 Vp-p/ 75 ohms S-Video Output: 4-pin mini DIN/Y: 1.0 Vp-p, C: 0.286 Vp-p/75 ohms

HDMI Output HDMI 19-pin standard connector

LAN (100): 100BASE-TX Terminal

EXT: External memory slot (For connecting the external memory) DC output: 5 V 500 mA Max

CONTROL S IN / IR IN: Mini jack

RS232C port: D-sub 9-pin

General Power requirements:

120 V AC, 60 Hz Power consumption:

36 W Dimensions (approx.):

430 mm 240 mm 555 mm (17 in. 9 1/2 in. 21 7/8 in.) (width/height/depth) incl. projecting parts

Mass (approx.): 14.2 kg (31 lb 5 oz)

Operating temperature: 5 C to 35 C (41 F to 95 F)

Operating humidity: 25 % to 80 %

Supplied accessories See page 17.

Specifications and design are subject to change without notice.

Standby power consumption 0.3 W. Halogenated flame retardants are not used

in the certain printed wiring boards.

US

Additional Inform ation

Language Code List For details, see page 73. The language spellings conform to the ISO 639: 1988 (E/F) standard.

Parental Control/Area Code For details, see page 73.

Number, Language

Number, Area (Code)

2044, Argentina (ar) 2047, Australia (au) 2046, Austria (at) 2057, Belgium (be) 2070, Brazil (br) 2079, Canada (ca) 2090, Chile (cl) 2092, China (cn) 2093, Colombia (co) 2115, Denmark (dk) 2165, Finland (fi) 2174, France (fr) 2109, Germany (de)

2200, Greece (gr) 2219, Hong Kong (hk) 2248, India (in) 2238, Indonesia (id) 2239, Ireland (ie) 2254, Italy (it) 2276, Japan (jp) 2304, Korea (kr) 2333, Luxembourg (lu) 2363, Malaysia (my) 2362, Mexico (mx) 2376, Netherlands (nl) 2390, New Zealand (nz)

2379, Norway (no) 2427, Pakistan (pk) 2424, Philippines (ph) 2428, Poland (pl) 2436, Portugal (pt) 2489, Russia (ru) 2501, Singapore (sg) 2149, Spain (es) 2499, Sweden (se) 2086, Switzerland (ch) 2543, Taiwan (tw) 2528, Thailand (th) 2184, United Kingdom (gb)

not specified

91

92U

S

Terms and Conditions of Use and End User License Agreement The Sony Blu-ray Disc player (Product) and associated software (Software) are provided and maintained by Sony Electronics Inc. and its affiliates (Sony). Sony also provides and maintains associated service (the Service), including any subsite accessible through the Services Internet homepage (the Site). The Software includes software embedded in the Product; stored on any media, bundled with the Product or otherwise provided by Sony; downloaded from the Site or otherwise made accessible or provided by Sony; any such media and any printed or on-line or electronic documentation associated with the Product and all updates and upgrades thereto.

WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE, PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT, WITHOUT LIMITATION OR QUALIFICATION, THE TERMS AND CONDITIONS SET FORTH HEREIN, SONYS PRIVACY POLICY POSTED ON THE SITE, AND ANY ADDITIONAL TERMS AND CONDITIONS OF USE SET FORTH IN ANY PORTION OF THE SERVICE AND SITE (COLLECTIVELY THE AGREEMENT). IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT, SONY DOES NOT GRANT THE LIMITED RIGHTS HEREIN, AND PLEASE DO NOT USE THE SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.

1. Ownership The Software and all materials on the Service and/or Site, including but not limited to images, software and text (the Content) are protected by copyright under U.S. copyright law, international conventions, and other copyright laws. You cannot use the Software, Service, Product, Content, and Site except as specified herein. There may be proprietary logos, service marks, and trademarks found on this Service or Site. By making them available on the Service and/or Site, Sony is not granting you any license to utilize those proprietary logos, service marks, or trademarks. Any unauthorized use of the Service, Site, Content or Software may violate copyright laws, trademark laws, the laws of privacy and publicity, and civil and criminal statutes. All title and copyright in and to the Software or materials on the Service/Site and any copies of the Software, are owned by Sony, its licensors, or suppliers. All rights not specifically granted under this Agreement are reserved by Sony, its licensors, and suppliers.

2. Your Rights & Limited License The Service, Site, Software, Content, and Product are only for your personal use. You are responsible for all your activities hereunder, including all legal liability incurred from your use of the Service or others who use the Service via your Product or Account (as defined below). You may use the Service, Site, Software, Content and Product for lawful purposes only. You may not distribute, exchange, modify, sell, or transmit anything you may copy from the Service or Site, including but not limited to any text, images, audio, and video, for any business, commercial, or public purpose. As long as you comply with the terms of this Agreement, Sony grants you a non-exclusive, non- transferable, limited right to enter, display, and use the Service, Site, and Software as set forth in this Agreement. You agree not to interrupt/disrupt or attempt to interrupt/disrupt the operation of this Service, Site or Software in any way.

3. User Account & Privacy As part of your usage of the Product, Service, Site, and/or Software, Sony may require that you establish a user account (Account) for which you must provide Sony true, accurate, current, and complete information about yourself and maintain/ promptly update such information. You are responsible for maintaining the confidentiality of any and all of your passwords associated with the Account. You agree to notify Sony immediately of any unauthorized use of your password or any other breach of security related to the Service, Site, and/or Software.

Sonys Privacy Policy is posted on the Site and at http://products.sel.sony.com/SEL/legal/privacy.html, the terms of which are incorporated herein, and applies to your use of the Account, Product, Service, Site, and Software.

4. Automatic Update The Software contains a functionality by which it is updated automatically when the Product is connected to a server belonging to Sony or to a third party designated by Sony. When you specify your intention not to use this automatic update functionality, or when the setting asking whether you wish to update automatically is activated and you decline to execute updates, it is assumed that you agree that the security functionality improvements, error corrections, other functional updates or any other changes offered by Sony through such updates would not be made to the Software and that your current and further use of the Software may be affected thereby.

When the automatic update functionality described in the previous paragraph is activated, it is assumed that you agree (a) that the Software will be automatically updated as necessary to improve security functionality, to correct errors, to improve update functionality, or for other purposes, and (b) that this updating of the Software may be accompanied by the augmenting, modifying, or removing of functionality of the Software.

5. Additional Terms Governing Product Software You may use the Software solely in conjunction with the Product that accompanied the Software. The Software is licensed, not sold. In addition to the terms set forth in other portions of this Agreement, the Software is subject to the following:

Use of Software. You may use the Software in conjunction with the Product for personal use. Limitation on Reverse Engineering, Decompilation and Disassembly. You may not modify, reverse engineer, decompile, or disassemble the Software in whole or in part. Separation of Components.The Software is licensed as a single product. Its component parts may not be separated for use on more than one device unless expressly authorized by Sony. Data Files. The Software may create data files automatically for use with the Software. Any such data files will be deemed as part of the Software. Rental. You may not rent or lease the Software. Software Transfer. You may permanently transfer all of your rights under this Agreement only as part of a sale or transfer of Software accompanying the sale or transfer of your Product, provided you retain no copies, transfer all of the Software (including all copies, component parts, the media and printed materials, all versions and any upgrades of the Software and this Agreement), and the recipient agrees to the terms of this Agreement. Dependent Software. The software, network services or other products other than Software upon which the Softwares performance depends on might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service providers or Sony). High Risk Activities. The Software is not fault-tolerant and is not designed, manufactured or intended for use or resale as on- line control equipment in hazardous environments requiring fail- safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Software could lead to death, personal injury, or severe physical or environmental damage (High Risk Activities). Sony and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities.

US

Additional Inform ation

U.S. Government Restricted Rights. The Software is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the United States Government is subject to restriction as set forth in subparagraph (c) (1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is Sony Electronics Inc., 16530 Via Esprillo, San Diego, CA 92127. GNU General Public, Lesser General Public, & Other Licenses. Notwithstanding terms in this Agreement, certain portions of the Software are governed by the GNU Lesser General Public License, Version 2.1 (LGPL), GNU General Public License Version 2 (GPL), and other open source code licenses (Open Source Licenses), copies of which are attached hereto and incorporated herein. For such portions of the Software, to the extent there is any conflict between this Agreement and the Open Source Licenses, the Open Source Licenses shall govern as applicable. Certain Source Code Availability. Sony is making available the source code of certain portions of the SOFTWARE per the GPL/ LGPL LICENSES. Please see http://www.sony.com/linux for access to and instructions on obtaining such source code.

6. Changes to Service Sony reserves the right to discontinue one, some, or all of the features of the Service you receive at any time at its discretion. Sony may, at its discretion and from time to time change, add or remove features and functionality, upgrade or modify the Service, Site and/or Software without notice. You may, at Sonys discretion, receive messages regarding these changes and new features/functionality. Any new text, content, file, data, product, services, information, software, software tool or other feature provided by Sony (through the network or by CD-ROM or other means) (including, but not limited to, any update to Software provided to you automatically pursuant to Section 4 of this Agreement) will be subject to this Agreement; provided that, if separate terms and conditions applicable to such feature are provided to you, such terms and conditions shall apply to such feature in priority to this Agreement.

7. Confidentiality You shall maintain the confidentiality of any information with regard to the Product and Documentation that is provided under this Agreement and is not publicly known. You agree not to disclose such information to any third party without the prior written consent.

8. Sonys Right to Terminate or Modify Terms or Conditions of this Agreement Sony may add to, change, or remove any part, term, or condition of this Agreement at any time, without prior notice. Any changes to this Agreement or any terms posted on the Service and/or Site apply as soon as they are posted. By continuing to use the Service, Product, Software and/or Site after any changes are posted, you are indicating your acceptance of those changes. SONY MAY ADD, CHANGE, DISCONTINUE, REMOVE, OR SUSPEND ANY OTHER CONTENT POSTED ON THE SERVICE AND/OR SITE, INCLUDING FEATURES AND SPECIFICATIONS OF PRODUCTS DESCRIBED OR DEPICTED ON THE SERVICE AND/OR SITE, TEMPORARILY OR PERMANENTLY, AT ANY TIME, WITHOUT NOTICE AND WITHOUT LIABILITY. WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY MAY SUSPEND OR TERMINATE THIS AGREEMENT IMMEDIATELY UPON NOTICE IF YOU FAIL TO COMPLY WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT. Upon termination, you shall destroy the Software within fourteen (14) days after the date of such termination, and upon Sonys request, provide Sony with the certification of such destruction. Sony may take any legal and technical remedies to prevent the violation of and/or to enforce this Agreement, including without limitation, immediate termination of your access to the Service if we believe in our discretion you are violating this Agreement.

9. Indemnification You agree to indemnify, defend, and hold Sony and all of its agents, directors, employees, information providers, licensors and licensees, affiliates, content providers, officers, and parent (collectively, Indemnified Parties), harmless from and against any and all liability and costs (including, without limitation, attorneys fees and costs), incurred by the Indemnified Parties in connection with any claim arising out of (i) any breach or alleged breach by you of this Agreement in any manner, (ii) any information you submit to Sony hereunder, (iii) any breach or alleged breach by you of a third partys rights or (iv) any damage caused by or alleged to have been caused by you to the Service. You will cooperate as fully as reasonably required in Indemnified Party(s) defense of any claim. Sony and/or Indemnified Parties reserve the right, at its own expense, to assume the exclusive defense and control of any matter otherwise subject to indemnification by you and you shall not in any event settle any matter without the written consent of Sony and/or Indemnified Parties.

10. DISCLAIMER OF WARRANTIES AND DAMAGES; LIMITATION OF LIABILITY YOU UNDERSTAND THAT USAGE OF THE PRODUCT AND SERVICE REQUIRES INTERNET SERVICE PROVIDED BY YOU, FOR WHICH YOU ARE SOLELY RESPONSIBLE. OPERATION OF THE PRODUCT AND/OR SERVICE MAY BE LIMITED OR RESTRICTED DEPENDING UPON THE CAPABILITIES OR TECHNICAL LIMITATIONS OF YOUR INTERNET SERVICE.

YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT, CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE SOFTWARE, SERVICE, CONTENT AND SITE ARE PROVIDED AS IS AND, TO THE FULLEST EXTENT PERMISSIBLE BY LAW, SONY MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHATSOEVER (1) FOR THE ACCURACY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ASSOCIATED WITH THE SERVICE, SITE, AND/OR SOFTWARE; (2) THAT THE SERVER(S) THAT MAKES THE SERVICE, SOFTWARE, AND/OR SITE AVAILABLE ARE FREE OF VIRUSES OR OTHER COMPONENTS THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO YOUR COMPUTER, TELEVISION, OTHER EQUIPMENT, OR ANY OTHER PROPERTY. FURTHERMORE, SONY DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE, SERVICE, AND/ OR SITE PROVE DEFECTIVE YOU (AND NOT SONY OR A SONY AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT LIMITED TO SONYS NEGLIGENCE OR ISSUES RELATED TO THIRD PARTY CONTENT PROVIDERS, SHALL SONY BE LIABLE FOR ANY CONSEQUENTIAL, DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, OR SPECIAL DAMAGES RELATED TO (A) THE USE OF, (B) THE INABILITY TO USE, OR (C) ERRORS OR OMISSIONS IN THE SOFTWARE, SERVICE, PRODUCT, AND/OR SITE, EVEN IF SONY OR AN AUTHORIZED REPRESENTATIVE THEREOF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT SHALL SONYS TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION (WHETHER IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE OR OTHERWISE) EXCEED $100.00.

,continued

93

94U

S

11. General Provisions This Agreement, the limited warranty accompanying the Product, plus any additional terms posted on the Service or Site, together constitute the entire agreement between Sony and you with respect to your use of the Product, Service, Site, Content, and Software. Any notice by Sony hereunder may be made by letter, email, or posting on the Service or Site. Any cause of action you may have with respect to your use of this Site must be commenced within one (1) year after the claim or cause of action arises. If for any reason a court of competent jurisdiction finds any provision of this Agreement, or portion thereof, to be unenforceable, that provision shall be enforced to the maximum extent permissible so as to affect the intent of this Agreement, and the remaining terms and conditions of the Agreement shall continue in full force and effect. This Agreement shall be governed by and construed in accordance with the laws of the State of Delaware, United States of America, without reference to its conflicts of law rules. You agree to submit to the personal and exclusive jurisdiction of federal or state courts in Delaware.

Gracenote End User License Agreement This application or device contains software from Gracenote, Inc. of Emeryville, California (Gracenote). The software from Gracenote (the Gracenote Software) enables this application to perform disc and/or file identification and obtain music- related information, including name, artist, track, and title information (Gracenote Data) from online servers or embedded databases (collectively, Gracenote Servers) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non- commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.

The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.

The Gracenote Software and each item of Gracenote Data are licensed to you AS IS. Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT

WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES.

US

Additional Inform ation

Software License Information Required public statement & License for GPL/LGPL licensed software used in this product This product contains software that is subject to the following GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.

Package List linux-kernel.tar.gz pump lrzsz busybox gcc glibc netbase dosfstools lzo mkcramfs hostname scfs

The source code for the above-listed software is available on the Web. To download, please access the following URL: http://www.sony.net/Products/Linux Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code.

GNU GENERAL PUBLIC LICENSE Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble The Licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each authors protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyones free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which

contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

,continued

95

96U

S

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine- readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

US

Additional Inform ation

NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.

Copyright (C)

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details.

The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program Gnomovision (which makes passes at compilers) written by James Hacker.

, 1 April 1989 Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.

GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.

,continued

97

98U

S

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.

We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a work based on the library and a work that uses the library. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or

other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this License). Each licensee is addressed as you.

A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.

The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.)

Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent

notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.

US

Additional Inform ation

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine- readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a work that uses the Library with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a work that uses the library. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.

When a work that uses the Library uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and assessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customers own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

,continued

99

100U

S

9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.

Copyright (C)

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.

US

Additional Inform ation

You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker.

signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice

Thats all there is to it!

Required statements for OpenSSL project used in this product This product contains OpenSSL (including the library Original SSLeay), which Sony uses under license with the copyright holder. In compliance with a request by the copyright holder of said software, Sony conveys the following notice and asks that you read it. Package name: sony-target-grel-openssl-0.9.8g-020201.src.rpm

OpenSSL Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http:// www.openssl.org/)

4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl- core@openssl.org.

5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http:// www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

Original SSLeay License Original SSLeay Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) The word cryptographic can be left out if the rouines from the library being used are not cryptographic related :-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: This product includes software written by Tim Hudson (tjh@cryptsoft.com)

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

FreeType The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.

,continued

101

102U

S

THE FREETYPE PROJECT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

Notice about NetBSD Software BSD License Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the NetBSD Foundation, Inc. and its contributors.

4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The following notices are required to satisfy the license terms of the software that we have mentioned in this document:

This product includes software developed by Adam Glass. This product includes software developed by Bill Paul. This product includes software developed by Charles M. Hannum. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christos Zoulas. This product includes software developed by Gardner Buchanan. This product includes software developed by Gordon W. Ross This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Manuel Bouyer. This product includes software developed by Rolf Grossmann. This product includes software developed by TooLs GmbH. This product includes software developed by the NetBSD

Foundation, Inc. and its contributors. This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory. This product includes software developed for the NetBSD Project by Wasabi Systems, Inc. This product includes software developed for the NetBSD Project by Matthias Drochner..

Notice about JPEG Parts of this product utilize the research results of the Independent JPEG Group. Package name sony-target-grel-libjpeg-6b-020201.src.rpm.

In plain English:

1. We dont promise that this software works. (But if you find any bugs, please let us know!)

2. You can use this software for whatever you want. You dont have to pay us.

3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code.

In legalese: The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided AS IS, and you, its user assume the entire risk as to its quality and accuracy.

This software is copyright (c) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.

Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: (1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation. (2) If only executable code is distributed, then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group. (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.

These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us.

Permission is NOT granted for the use of any IJG authors name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as the Independent JPEG Groups software.

We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor.

Notice about PuTTY Software This product contains some code of the application PuTTY. Source package: putty-0.58.tar.gz License text: http://www.chiark.greenend.org.uk/~sgtatham/ putty/licence.html

PuTTY is copyright 1997-2006 Simon Tatham.

Portions copyright Robert de Bath, Joris van Rantwijk, Delian Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus Kuhn, and CORE SDI S.A.

US

Additional Inform ation

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL SIMON TATHAM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Notice about fdlibm Software @(#)fdlibm.h 1.5 95/01/18 Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.

Developed at SunSoft, a Sun Microsystems, Inc. business. Permission to use, copy, modify, and distribute this software is freely granted,provided that this notice is preserved.

Notice about Root Certificates In addition, the Runtimes and Runtime Components may contain one or more root certificates (herein referred to as Root Certificates). You may not modify the Root Certificates.

Notice about Nano-XML Copyright (C) 2000-2002 Marc De Scheemaecker, All Rights Reserved. This software is provided as-is, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

About MPEG-4 AVC and VC-1 THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER TO DECODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR THE VC-1 STANDARD (VC-1 VIDEO) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/ OR VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

Notice about expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003 Expat maintainers.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

103

104U

S

Glossary AACS Advanced Access Content System is a specification for managing digital entertainment contents stored on the next generation of prerecorded and recorded optical media. The specification enables consumers to enjoy digital entertainment content, including high-definition content.

BD-J application The BD-ROM format supports Java for interactive functions. BD-J offers content providers almost unlimited functionality when creating interactive BD-ROM titles.

BD-R (page 86) BD-R (Blu-ray Disc Recordable) is a recordable, write-once Blu-ray Disc, available in the same capacities as the BD below. Since contents can be recorded and cannot be overwritten, a BD-R can be used to archive valuable data or storing and distributing video material.

BD-RE (page 86) BD-RE (Blu-ray Disc Rewritable) is a recordable and rewritable Blu-ray Disc, available in the same capacities as the BD below. The re-recordable feature makes extensive editing and time-shifting applications possible.

BD-ROM (page 86) BD-ROMs (Blu-ray Disc Read-Only Memory) are commercially produced discs and are available in the same capacities as the BD below. Other than conventional movie and video contents, these discs have enhanced features such as interactive content, menu operations using pop-up menus, selection of subtitle display, and slideshow. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Disc/DVD players.

Blu-ray Disc (BD) (page 86) A disc format developed for recording/ playing high-definition (HD) video (for HDTV, etc.), and for storing large amounts of data. A single layer Blu-ray Disc holds up to 25 GB, and a dual-layer Blu-ray Disc holds up to 50 GB of data.

Deep Color (page 68) These are video signals for which the color depth of signals passing through an HDMI jack have been enhanced. With a Non-Deep Color-compatible player, the number of colors 1 pixel can express is 24 bits (16,777,216 colors). However, with a Deep Color-compatible player, 1 pixel can express more bits, such as 36 bits. With more bits, the gradation of color depth can be expressed more finely, and continuous color changes will be displayed more smoothly.

Dolby Digital Plus (page 89) Developed as an extension to Dolby Digital, the audio coding technology supports 7.1 multi-channel surround sound.

Dolby TrueHD (page 89) Dolby TrueHD is a lossless coding technology that supports up to 8 channels of multi-channel surround sound for the next generation optical discs. The reproduced sound is true to the original source bit-for-bit.

DTS (page 89) Digital audio compression technology that DTS, Inc. developed. This technology conforms to multi-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. DTS provides the same discrete channels of high quality digital audio. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration occurs because all channel data processing is digital.

DTS-HD High Resolution Audio (page 89) Developed as an extension to DTS Digital Surround format. It supports a maximum sampling frequency of 96 kHz, and 7.1 multi- channel surround. DTS-HD High Resolution Audio has a maximum transmission rate of 6 Mbps, with lossy compression (Lossy).

US

Additional Inform ation

DTS-HD Master Audio (page 89) DTS-HD Master Audio has a maximum transmission rate of 24.5 Mbps, and uses lossless compression (Lossless), and DTS- HD Master Audio corresponds to a maximum sampling frequency of 192 kHz, and maximum of 7.1ch.

HDMI (High-Definition Multimedia Interface) (page 19) HDMI is an interface that supports both video and audio on a single digital connection. The HDMI connection carries standard- to high- definition video signals and multi-channel audio signals to AV components such as HDMI equipped TVs, in digital form without degradation. The HDMI specification supports HDCP (High-bandwidth Digital Contents Protection), a copy protection technology for digital entertainment contents for HDMI.

HD Reality Enhancer (page 42, 49) Sony-developed technology provides real- time parsing pixel-by-pixel, performs optimum smoothing, clarifies details, removes noise and achieves smoother gradation in video signals during playback.

LPCM (Linear PCM) (page 89) A digital audio format that does not cause deterioration in data compression and expansion.

LTH (Low to High) (page 87) LTH is a recording system that supports organic pigment type BD-R.

PhotoTV HD (page 50) PhotoTV HD allows for a highly-detailed pictures, and photo-like expression of subtle textures and colors. By connecting Sony PhotoTV HD compatible devices using an HDMI cable, whole new world of photos can be enjoyed in breathtaking Full HD quality. For instance, the delicate texture of the human skin, flowers, sand and waves can now be displayed on a large screen in beautiful photo-like quality.

Pop-up menu (page 39) An enhanced menu operation available on BD-ROMs. The pop-up menu appears when POP UP/MENU is pressed during playback, and can be operated while playback is in progress.

Super Bit Mapping (page 68) It is possible to achieve smoother gradation by putting 14 bits of information into an 8-bit video signal. This Sony-developed technology takes into account human vision characteristics.

x.v.Color (page 68) x.v.Color is a familiar term for the xvYCC standard proposed by Sony. xvYCC is an international standard for Color space in video. This standard can express a wider color range than the currently used broadcast standard.

24p True Cinema (page 67) Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an even pace. When connected to a TV with 24p capabilities, the player displays each frame at 1/24 second intervals the same interval originally shot with the film camera, thus faithfully reproducing the original cinema image.

105

106U

S

Index Words in quotations appear in the on-screen displays.

Numerics 24p True Cinema 105

A A/V Settings 41 AACS 104 Accessing Gracenote 77 Angle 13 Audio 12 Audio Output Priority 69 Audio output signals 89 Audio Settings 43, 69 Auto Standby 77

B Batteries 31 BD Data 40, 84 BD/DVD Viewing Settings 73 BD-Live 28, 39 BD-R 86, 104 BD-RE 86, 104 Bitstream 89 Blu-ray Disc 86, 104 BonusView 39 BRAVIA Sync 56, 83

C CD 86 Chapter Search 41 Child Lock 77 Child Lock 10, 84 Color buttons 13 Command Mode 77 Connecting

AV amplifier (receiver) 23

TV 18 Control for HDMI 56, 76, 83

Custom Installation Control 76

D Deep Color 68, 104 Dimmer 76 DISC LOAD 36 DISPLAY 13 Dolby Digital 25, 72 Dolby Digital Plus 89, 104 Dolby TrueHD 89, 104 DTS 25, 72 DTS-HD 89, 104 DVD 86

E Easy Setup 31, 79 Edit 53 External memory 28, 39, 83

F Front panel display 10

G Genre 53 Group Content 38, 44

H HD Reality Enhancer 42, 49, 105 HDMI 19, 24, 32, 66, 68, 69, 71, 83, 105 HOME 13 Home menu 44, 48, 63

L Language Follow 56 LOAD 52 Local storage 28, 39, 83 LTH 105

M MP3 86 MPEG-4 103 MULTI CHANNEL OUTPUT 26, 69 Music 44

N Network Diagnostic 79 Network Settings 78 Network Update 29, 64

O One-Touch Play 56 OPTIONS 13, 38, 44, 48 OSD 76

P Parental Control 73 Photo 48 Photo Settings 76 PhotoTV HD 50, 105 Playable discs 86 POP UP/MENU 13, 39

Q Quick Start Mode 77

R Region code 87 Remote 12, 31 RENTAL SLOT 35 Resetting 80 Resetting the player 80 Resume 14, 38

S SCENE SEARCH 14 Searching 40, 41 Self-diagnosis function 85 Setup 63 Software Update Notification 29, 64, 77 Sort By 38, 44 Speaker Settings 69 Subtitle 12 Super Bit Mapping 68, 105 System Power-Off 56 System Settings 76

US

T THEATER 12, 56 Title Search 41 TOP MENU 13, 39 Troubleshooting 81 TV Type 65

U Update 29, 64

V Video 37 Video output resolution 88 Video Settings 41, 65

X x.v.Color 68, 105

107

2FR

AVERTISSEMENT Afin de rduire les risques dincendie ou de choc lectrique, ne pas exposer cet appareil la pluie ni lhumidit.

Afin de rduire le risque dincendie ou de choc lectrique, ne pas exposer cet appareil au giclage ni aux claboussures et ne pas poser des objets remplis de liquide, tels que des vases, sur lappareil.

Afin de rduire le risque dincendie, ne pas recouvrir les orifices de ventilation de lappareil avec du papier journal, une nappe, un rideau, etc. Ne pas poser des sources de flamme nue, telles que des bougies allumes, sur lappareil.

Puisque la fiche principale est utilise pour dbrancher lappareil de lalimentation secteur, brancher lappareil une prise de courant alternatif facilement accessible. Advenant toute anomalie de lappareil, dbrancher immdiatement la fiche principale de la prise de courant alternatif.

Ne pas installer lappareil dans un espace clos, comme une bibliothque ou un placard encastr.

Ne pas exposer les batteries ou un appareil comportant des batteries une chaleur excessive comme le rayonnement du soleil, le feu ou une source de chaleur du genre.

Ce symbole avertit lutilisateur de la prsence, lintrieur de lappareil, dune tension

dangereuse non isole suffisamment importante pour causer une lectrocution.

Ce symbole avertit lutilisateur que des consignes importantes dutilisation et

dentretien (dpannage) sont donnes dans la documentation accompagnant lappareil.

Lappareil nest pas dconnect de lalimentation secteur tant quil

reste branch la prise de courant alternatif, mme si le lappareil lui- mme a t mis hors tension.

Notes sur le mode demploi 1) Lire ces notes. 2) Conserver ces notes. 3) Respecter tous les

avertissements. 4) Suivre toutes les consignes. 5) Ne pas utiliser cet appareil prs

de leau. 6) Nettoyer lappareil avec un

chiffon sec. 7) Ne pas obstruer les orifices de

ventilation. Installer lappareil en respectant les consignes du fabricant.

8) Ne pas installer lappareil proximit de sources de chaleur, tels quun radiateur, un registre de chaleur, une cuisinire ou un autre appareil (y compris les amplificateurs) qui produisent de la chaleur.

9) Ne pas faire chec la fonction de scurit de la fiche polarise ou de mise la terre. Une fiche polarise comporte deux broches dont lune est plus large que lautre. Une fiche de mise la terre comporte deux broches plates et une broche ronde de mise la terre. La broche large ou la broche ronde existe pour assurer votre scurit. Si la fiche fournie ne sinsre pas dans la prise de courant, consulter un lectricien afin de remplacer la prise de courant dsute.

10)Protger le cordon dalimentation pour viter quil ne soit pitin ou pinc, surtout au niveau de la fiche, de la prise de courant et du point de sortie de lappareil.

11)Nutiliser que des accessoires spcifis par le fabricant.

12)Nutiliser quavec le chariot, le support, le trpied ou la table spcifi par le fabricant ou vendu avec lappareil. Lorsquun chariot est utilis, dplacer lensemble chariot- appareil avec prudence afin dviter toute blessure occasionne par un ventuel renversement.

13)Dbrancher lappareil pendant les orages ou lorsquil nest pas utilis pendant une priode prolonge.

14)Ne confier lentretien de lappareil qu un technicien comptent. Un dpannage savre ncessaire lorsque lappareil est endommag de quelque faon que ce soit, par exemple lorsque le cordon dalimentation ou la fiche est endommag, du liquide est renvers ou des objets sont tombs dans lappareil; lorsque lappareil est expos la pluie ou lhumidit, quil ne fonctionne pas normalement ou quil a t chapp.

Donnes dutilisateur Le numro de modle et le numro de srie se trouvent larrire de lappareil. Inscrivez le numro de srie dans lespace prvu cette fin ci-dessous. Reportez-vous ces numros lorsque vous contactez un revendeur Sony propos de cet appareil.

Numro de modle BDP- CX7000ES Numro de srie______________

ATTENTION Lutilisation dinstruments optiques avec cet appareil augmente les risques de lsions oculaires. Ne pas tenter de dmonter le botier, car le faisceau laser utilis lintrieur du lecteur Blu-ray Disc/DVD peut causer une blessure aux yeux. Ne confiez lentretien de cet appareil qu un technicien comptent.

Cette tiquette est appose sur le botier protecteur du laser lintrieur du botier de lappareil.

FR

FR

Pour les clients rsidant aux tats-Unis La dclaration de la FCC suivante sapplique uniquement au modle fabriqu pour la vente aux tats- Unis. Dautres modles peuvent ne pas respecter les rglements techniques de la FCC.

REMARQUE : Cet quipement a t vrifi et sest rvl conforme aux limites pour un dispositif numrique de Classe B, conformment la Section 15 des Rglements de la FCC. Ces limites sont conues pour offrir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de lnergie radiofrquence et, sil nest pas install et utilis conformment aux directives, peut causer de linterfrence nuisible aux communications radio. Il ny a toutefois aucune garantie que de linterfrence ne surviendra pas dans une installation donne. Si cet appareil cause de linterfrence nuisible la rception radio ou tlvision, ce qui peut tre dtermin en mettant lappareil en fonction et hors fonction, lutilisateur est encourag tenter de corriger linterfrence au moyen dune des mesures suivantes ou plus : Rorientez ou dplacez lantenne

de rception. Augmentez la distance entre

lappareil et le rcepteur. Branchez lappareil dans une

prise dun circuit diffrent de celui o est branch le rcepteur.

Consultez le revendeur ou un technicien en radio/tlvision expriment pour obtenir de laide.

ATTENTION Vous tes avis que toute modification non approuve dans le prsent mode demploi pourrait annuler votre droit dutiliser cet appareil.

Pour toute question sur ce produit, vous pouvez appeler le Cetre de service dinformation la clientle de Sony au 1-800-222-7669 ou visiter le site http://www.sony.com/

Pour les clients rsidant au Canada Cet appareil numrique de la classe B est conforme la norme NMB- 003 du Canada.

Si ce produit savre dfectueux, prire dappeler le Service de remplacement en garantie Tranquillit desprit au 1-877-602-2008. Pour tout autre renseignement au sujet du produit, prire dappeler le Centre de service dinformation la clientle au 1-877-899-7669 ou nous crire au : Centre dinformation la clientle 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6

Prcautions Pour viter tout risque

dlectrocution, nouvrez pas le botier. Ne confiez lentretien de cet appareil qu un technicien comptent.

Gardez la mmoire externe hors de porte des enfants. En cas davalement, consultez sans tarder un mdecin.

Prcautions Scurit Pour viter les risques

dincendie ou dlectrocution, ne pas placer dobjets remplis de liquide, tels que des vases, sur le lecteur, ni placer ce dernier prs de leau, comme par exemple prs dune baignoire ou dune salle de douche. Si un objet ou du liquide venait pntrer lintrieur du botier, dbrancher le lecteur et le faire vrifier par un technicien qualifi avant de le remettre en fonction.

Ne pas toucher le cordon dalimentation avec les mains mouilles. Il y a risque dlectrocution.

Emplacement du lecteur Installer le lecteur dans un

endroit suffisamment ventil pour viter toute surchauffe interne.

Ne pas installer le lecteur sur une surface souple, telle quun tapis, susceptible dobstruer les orifices de ventilation.

Ne pas installer le lecteur dans un endroit poussireux ou soumis des chocs ou au rayonnement direct du soleil, ni proximit de sources de chaleur.

Si le lecteur est transport directement dun endroit froid un endroit chaud ou sil est install dans une pice trs humide, de la condensation peut se former sur les lentilles situes lintrieur de lappareil. Dans ce cas, il est possible que le lecteur ne fonctionne pas correctement. Retirer alors le disque et laisser le lecteur sous tension pendant environ trente minutes, jusqu ce que lhumidit se soit vapore.

Tenir le lecteur et les disques distance des appareils quips daimants puissants, dont les micro-ondes et les enceintes puissantes.

,suite

3

4FR

Ne pas poser dobjets lourds ou instables sur le lecteur.

Ne pas installer lappareil en position incline. Il est conu pour fonctionner uniquement lhorizontale.

Ne pas placer dobjets autres que des disques sur le tiroir de disque. Cela risquerait dabmer le lecteur ou lobjet.

Avant de dplacer le lecteur, en retirer le disque. Sinon, le disque pourrait tre endommag.

Avant de dplacer le lecteur, dbrancher le cordon dalimentation et tous les autres cbles du lecteur.

Transport du lecteur Avant de transporter le lecteur, suivez les directives ci-dessous pour rtablir les mcanismes internes leurs positions initiales. 1) Retirer les disques des fentes. 2) Appuyer sur OPEN/CLOSE

pour fermer le panneau avant. Vrifier que le message NO DISC saffiche sur le panneau avant.

3) Attendre 10 secondes, puis appuyer sur [/1 pour teindre le lecteur. Le lecteur passe en mode de veille.

4) Dbrancher le cordon dalimentation.

Sources dalimentation Si le lecteur nest pas utilis

pendant une longue priode, le dbrancher de la prise murale. Pour dbrancher le cordon dalimentation c.a., le saisir par la fiche.

Respecter les points suivants pour viter dabmer le cordon dalimentation. Ne pas utiliser le cordon dalimentation sil est endommag, car il y a risque dlectrocution ou dincendie. Ne pas pincer le cordon

dalimentation entre le lecteur et un mur, une tablette, etc.

Ne mettre aucun objet lourd sur le cordon dalimentation, ni tirer sur le cordon dalimentation lui-mme pour dbrancher sa fiche.

Rglage du volume Ne pas augmenter le volume lors de lcoute dun passage prsentant un trs faible niveau dentre ou sans signal audio. Cela pourrait entraner des dommages aux enceintes lors dun passage de niveau sonore lev.

Entretien de lappareil Nettoyer le botier, le panneau et les commandes avec un chiffon doux lgrement imbib dune solution dtergente neutre. Ne pas utiliser de tampons abrasifs, de poudre rcurer ni de solvants tels que de lalcool ou de lessence.

Nettoyage des disques et des nettoyants pour disque ou pour lentille Ne pas utiliser de disques nettoyants ou de nettoyants disque ou lentilles (y compris les liquides ou les arosols). Ils pourraient causer des problmes de fonctionnement de lappareil.

Remplacement des pices En cas de rparation, les pices rpares peuvent tre rcupres pour rutilisation ou recyclage.

Ne pas utiliser les disques suivants. Disque sur lequel est appos

une tiquette ou un autocollant.

Disque sur lequel est appos du ruban adhsif ou une pellicule adhsive.

Disque de forme irrgulire (par exemple en forme de carte ou de cur).

Adaptateur de disque de 8 cm (3 po). Le lecteur ne peut pas lire un disque de 8 cm. Ninsrez pas de disque de 8 cm (3 po) ni dadaptateur de disque de 8 cm (3 po). Cela risquerait dabmer le lecteur et le disque.

Un disque de nettoyage de lentille.

Si vous imprimez ltiquette du disque, laissez-la scher avant dutiliser le disque.

Si des barbures ou du matriel adhsif se fixent sur le disque, le lecteur risque de mal fonctionner. Pour assurer un fonctionnement stable, insrer un disque aprs avoir limin les barbures et les objets trangers. On peut liminer les barbures en frottant les bords du disque avec le ct dun stylo ou dun crayon. Lorsque

Remarques sur les disques

Ruban adhsif ou pellicule adhsive

Matriel adhsif

Adaptateur Disque de 8 cm

FR

le lecteur ne lit pas le disque, vrifiez la prsence dbarbures sur la surface du disque et les deux disques adjacents.

Ninsrez pas des disques autres que ceux dcrits la section Disques pris en charge (page 88). Linsertion dun disque non compatible peut causer un dysfonctionnement.

Pour un fonctionnement stable Pour que les disques restent

propres, les tenir par les bords. Ne jamais toucher leur surface. Assurez-vous de ne pas laisser dempreintes, surtout sur les Blu-ray Discs. La poussire, les empreintes ou les gratignures sur le disque peuvent causer un mauvais fonctionnement.

Nettoyer le disque laide dun chiffon doux. Essuyer le disque du centre vers la priphrie.

Ne pas essayer de refaire la surface de la face de lecture du disque pour en liminer les rayures.

Ne pas utiliser de solvant, tel quun diluant, du benzne ou un autre produit de nettoyage commercial pour disques ou objectifs, ou vaporisateur antistatique, destin des disques LP en vinyle.

Ne pas exposer les disques au rayonnement direct du soleil ou des sources de chaleur, telles que les conduits de chauffage, et ne pas les laisser dans un vhicule stationn en plein soleil. En effet, la temprature lintrieur de lhabitacle peut augmenter considrablement.

Aprs avoir retir un disque de la fente, le ranger dans son botier.

Fabriqu sous licence de Dolby Laboratories. Les termes Dolby et Pro Logic , ainsi que le sigle double D sont des marques commerciales de Dolby Laboratories.

Fabriqu sous licence en vertu des brevets amricains numros : 5,451,942 ; 5,956,674 ; 5,974,380 ; 5,978,762 ; 6,226,616 ; 6,487,535 ; 7,392,195 ; 7,272,567 ; 7,333,929 ; 7,212,872 et dautres brevets amricains et internationaux dlivrs et en instance. DTS est une marque dpose et le symbole, les logos DTS, DTS- HD et DTS-HD Master Audio | Essential sont des marques de commerce de DTS, Inc. 1996-2008 DTS, Inc. Tous droits rservs.

Java, ainsi que tous les logos et marques de commerce de type Java sont des marques de commerce, dposes ou non, de Sun Microsystems, Inc.

, XMB et xross media bar sont des marques de commerce de Sony

Corporation et Sony Computer Entertainment Inc.

Ce produit intgre la technologie High-Definition Multimedia Interface (HDMI). HDMI, le logo HDMI et High-Definition Multimedia Interface sont des marques de commerce, dposes ou non, de HDMI Licensing LLC.

Blu-ray Disc est une marque de commerce.

Les logos Blu-ray Disc , DVD+RW , DVD-RW , DVD+R , DVD-R , DVD VIDEO , et CD sont des marques de commerce.

BD-Live et BonusView sont des marques de commerce de Blu- ray Disc Association.

x.v.Color et le logo x.v.Color sont des marques de commerce de Sony Corporation.

BRAVIA est une marque de commerce de Sony Corporation.

PhotoTV HD et le logo PhotoTV HD sont des marques de commerce de Sony Corporation.

La technologie de codage audio MPEG Layer-3 est brevete et utilise sous licence de Fraunhofer IIS et Thomson.

La technologie de reconnaissance des donnes audio/vido et les donnes associes sont fournies par Gracenote. Gracenote constitue la norme de lindustrie en matire de technologie de reconnaissance musicale et de fourniture de contenus connexes. Pour plus de dtails, visitez www.gracenote.com. Les donnes sur CD, DVD ou/ et Blu-Ray et les donnes associes aux morceaux de musique et aux clips vido sont fournies par Gracenote, Inc. Copyright 2000-Date actuelle Gracenote. Logiciels Gracenote Copyright 2000- Date actuelle Gracenote. Ce

barbures

Stylo ou crayon

Matriel adhsif supplmentaire

Droits dauteur et marques de commerce

,suite

5

6FR

produit et ce service sont protgs par un ou plusieurs brevets appartenant Gracenote (pour plus de dtails, visitez le site Web de Gracenote). Les noms Gracenote , CDDB , MusicID , MediaVOCS , le logo Gracenote, le graphisme Gracenote, la mention Powered by Gracenote sont des marques ou des marques dposes de Gracenote aux tats-Unis et/ ou dans dautres pays.

Les autres noms de systme et de produit sont gnralement des marques de commerce, dposes ou non, de leurs fabricants. Les symboles et ne sont pas indiqus dans ce document.

En cas de question ou de problme concernant le lecteur, veuillez vous informer auprs du revendeur Sony le plus prs.

Notes sur le mode demploi Dans ce manuel, le terme

disque dsigne la fois les disques BD, DVD et CD moins de spcification contraire dans le texte ou sur les illustrations.

Les icnes telles que qui figurent au-dessus de chaque explication indiquent le type de support quil est possible dutiliser avec la fonction explique. Pour plus de dtails, voir Disques pris en charge (page 88).

Les instructions de ce manuel dcrivent les commandes effectues laide de la tlcommande. Vous pouvez aussi utiliser les commandes du lecteur si leurs symboles sont similaires ceux de la tlcommande.

Il se peut que les illustrations de laffichage lcran soient diffrentes de ce qui saffiche rellement sur votre tlviseur.

Des informations ESSENTIELLES (visant prvenir les commandes incorrectes) figurent sous licne b. Des informations PRATIQUES (conseils et autres informations utiles) figurent sous licne z.

AVIS IMPORTANT Mise en garde : Ce lecteur peut maintenir indfiniment une image vido fixe ou un menu lcran dun tlviseur. Si une image vido fixe ou un menu reste affich lcran du tlviseur pendant une priode prolonge, lcran du tlviseur peut subir des dommages irrversibles. Les tlviseurs cran au plasma ou projection sont particulirement sensibles ce phnomne.

BD

FR

Table des matires AVERTISSEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prcautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Notes sur le mode demploi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide des pices et commandes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Guide des menus OSD (affichage sur cran) . . . . . . . . . . . . . . . . . . . . . . . . 15

Mise en route Raccorder le lecteur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 tape 1 : Raccordement au tlviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Raccordement une prise HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Raccordement aux prises vido composantes (Y/PB/PR) . . . . . . . . . 22 Raccordement une prise audio/vido ou S VIDEO . . . . . . . . . . . . . . 23

tape 2 : Raccordement un amplificateur (ampli-tuner) AV . . . . . . . . . . . . 24 Raccordement une prise HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Raccordement aux prises numriques (OPTICAL/COAXIAL) . . . . . . . 26 Raccordement aux prises 7.1 canaux . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Raccordement aux prises audio L/R . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

tape 3 : Insrer une mmoire externe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 tape 4 : Connecter lappareil au rseau . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Lors de la connexion directe un routeur large bande . . . . . . . . . . . . . 30 Lors de la connexion via un routeur LAN sans fil . . . . . . . . . . . . . . . . . 31

tape 5 : Brancher le cordon dalimentation . . . . . . . . . . . . . . . . . . . . . . . . . 31 tape 6 : Prparer la tlcommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 tape 7 : Rglage facile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 tape 8 : Insrer des disques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Insrer un disque de location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 tape 9 : Charger linformation de disque . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Lecture Lire les BD/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Utiliser le menu du BD ou du DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Profiter de BonusView/BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Chercher rapidement une scne (Chercher scne) . . . . . . . . . . . . . . . 41 Chercher un titre/chapitre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Ajuster limage et le son pour le contenu vido . . . . . . . . . . . . . . . . . . . 42

Lire les CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Rpter la lecture de la musique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Lire des disques en ordre alatoire (Lecture alatoire) . . . . . . . . . . . . . 47 Crer des listes de lecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Afficher les fichiers de photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Lire un diaporama . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

,suite

7

8FR

Organiser les disques Charger linformation de disque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Charger linformation de tous les disques . . . . . . . . . . . . . . . . . . . . . . . 52 Charger linformation de disque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Modifier linformation dun disque/titre/fichier . . . . . . . . . . . . . . . . . . . . . . . . 54 Modifier linformation de disque vido . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Modifier linformation de disque audio . . . . . . . . . . . . . . . . . . . . . . . . . 54 Modifier le nom du disque de photos . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Saisir les caractres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Fonctions BRAVIA Sync propos des fonctions BRAVIA Sync

(uniquement pour les connexions HDMI) . . . . . . . . . . . . . . . . . . . . . . . . 57

Fonctions de la tlcommande Utiliser le lecteur et dautres composants . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Changer le code de la tlcommande pour utiliser dautres

composants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Changer le mode de commande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Rglages et ajustements Utiliser les affichages de rglages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Mise jour rseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Rglages vido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Rglages audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Rglages daffichage BD/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Rglages photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Rglages systme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Rglages rseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Rgl. facile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Rinitialisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Informations supplmentaires Dpannage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Fonction dauto-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Disques pris en charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Rsolution de sortie vido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Signal de sortie audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Spcifications techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Liste des codes de langue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Contrle parental/Code de zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Modalits dutilisation et contrat de licence dutilisation . . . . . . . . . . . . . . . . 96 Informations sur la licence du logiciel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Glossaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Avant dutiliser le lecteur, veuillez lire la section Modalits dutilisation et contrat de licence dutilisation (page 96).

FR

Guide des pices et commandes Pour plus dinformations, voir les pages indiques entre parenthses.

A [/1 (marche/veille) (page 32) Allume le lecteur ou le met en mode de veille.

B Capteur de signal de tlcommande (page 32)

C Afficheur du panneau avant (page 10)

D N (lecture) (page 38) Lance la lecture.

X (pause) (page 38) Fait une pause de lecture.

x (arrt) (page 38) Arrte la lecture.

E Cadran DISC/AMS (page 35) Slectionne un disque en mode DISC CHANGE. Recherche un chapitre/une plage/une scne en mode DIRECT SEARCH. Le tmoin de mode slectionne est illumin sur lafficheur du panneau avant.

F +100 (page 35) Avance de 100 fentes de disques lors de la slection des disques.

DISC CHANGE Permute sur la fonction du cadran pour la slection du disque.

DIRECT SEARCH Permute sur la fonction du cadran pour la recherche dun chapitre/dune plage.

G OPEN/CLOSE (page 35) Ouvre ou ferme le panneau avant.

DISC EJECT (page 35) Ouvre le panneau avant et jecte le disque.

DISC LOAD (page 37) Lit linformation de tous les disques inconnus et les charge dans la mmoire.

RENTAL SLOT (page 36) Ouvre ou ferme le panneau avant afin de faire la lecture dun disque dans la fente numro 1.

H Panneau avant Souvre ou se ferme lorsque vous insrez ou jectez des disques.

Panneau avant

,suite

9

10FR

Pour verrouiller le panneau avant (Verrouillage enfant) Vous pouvez verrouiller le panneau avant pour viter quon ne louvre par erreur. Alors que le lecteur est allum, appuyez de manire continue sur la touche X du lecteur pendant plus de 10 secondes, jusqu ce que LOCKED apparaisse sur lafficheur du panneau avant. Le panneau avant est verrouill.

Pour dverrouiller le panneau avant, appuyez de manire continue sur la touche X du lecteur jusqu ce que UNLOCK apparaisse sur lafficheur du panneau avant.

A Format de fichier Affiche le format du fichier en cours de lecture.

B Type de disque Affiche le type du disque en cours de lecture.

C EXT (page 29) Sallume lorsque la mmoire externe est reconnue.

HDMI (page 20) Sallume lorsquun appareil HDMI est raccord.

D HD (page 67) Sallume lors de lmission du signal vido 720p/1080i/1080p par la prise HDMI OUT ou du signal vido 720p/ 1080i par les prises COMPONENT VIDEO OUT.

24P (page 68) Sallume lors de lmission du signal vido 1080p/24 Hz dun BD-ROM.

E Mode de lecture Affiche le mode de lecture en cours.

F DISC CHANGE/DIRECT SEARCH Affiche le mode de fonction slectionn sur le cadran.

G Numro de fente de disque Affiche le numro de la fente de disque slectionne ou en cours de lecture.

H Informations de lecture (page 13) Affiche le numro du disque/titre/ chapitre/plage.

I N, X Sallume pendant la lecture ou la pause.

J Tmoin de connexion rseau Sallume lors du tlchargement du logiciel du lecteur. Pour plus de dtails sur le tlchargement du logiciel du lecteur, voir page 65.

Afficheur du panneau avant

MP3 JPEG HDMI 24P PLAYLIST REPEAT 1 DIRECT SEARCH DISCDISC CHANGE

SECMINHOURTRACKCHAPTITLEDISC

SHUFFLEALL DISCSHDEXTBD DVD CD

1 2 3 4 765

89q;

FR

A Prises AUDIO OUT (L/R) (page 23, 28)

B Prises MULTI CHANNEL OUTPUT (FRONT L/R, SURROUND L/R, SUR BACK L/R, CENTER, SUB WOOFER) (page 27)

C Prises DIGITAL OUT (OPTICAL/ COAXIAL) (page 26)

D Borne LAN (100) (page 30)

E Prises VIDEO OUT (VIDEO / S VIDEO) (page 23)

F EXT Fente (page 29)

G Prises COMPONENT VIDEO OUT (Y/PB/PR) (page 22)

H Prise HDMI OUT (page 20, 25)

I Prise CONTROL S IN / IR IN Si vous avez un tlviseur ou amplificateur (ampli-tuner) AV Sony compatible avec CONTROL S, utilisez un cble Control S (non fourni) pour faire le raccordement la prise Control S (sortie). Reportez-vous au mode demploi fourni avec votre tlviseur ou amplificateur (ampli-tuner) AV.

J Orifices de ventilation Le ventilateur se trouve lintrieur du lecteur.

K Borne AC IN (page 31)

L Port RS232C Utilis pour lentretien et la rparation ou la communication avec lquipement externe.

Panneau arrire

,suite

11

12FR

Les touches numro 5, AUDIO, TV CH + et N PLAY sont dotes dun point tactile. Servez- vous de ce point tactile comme rfrence lorsque vous utilisez le lecteur.

Les fonctions des touches varient selon le mode slectionn par les touches OPERATION CHANGE. , et indiquent les fonctions disponibles pour chaque mode de fonctionnement.

b Les fonctions disponibles de la tlcommande varient en fonction du disque ou de la situation.

A AV [/1 (marche/veille) (page 60) Allume le tlviseur ou

lamplificateur (ampli-tuner) AV raccord ou le met en mode de veille.

[/1 (marche/veille) (page 32) Allume le lecteur ou le met en

mode de veille.

B OPERATION CHANGE (page 59) Change le mode de fonctionnement afin de commander le composant laide de la tlcommande.

Fait fonctionner le lecteur. Fait fonctionner un tlviseur

raccord. Fait fonctionner un amplificateur

(ampli-tuner) AV raccord.

C Z OPEN/CLOSE (page 35) Ouvre ou ferme le panneau avant.

INPUT (slection dentre) Permute entre le

tlviseur et les autres sources dentre.

THEATER (page 57) Permute automatiquement sur le

mode vido optimal pour le visionnement des films.

b La touche THEATER fonctionne uniquement lorsquun tlviseur compatible avec le mode Cinma est raccord.

D Touches numriques (page 40, 42, 61, 76, 77)

Saisit les numros de titre/chapitre, etc.

ENTER (page 40, 42, 61, 63) Valide loption

slectionne.

CLEAR/ (point) Efface le champ de saisie. Saisit . (point) lors de la saisie

de valeurs numriques.

E AUDIO (page 75)/FAVORITES Slectionne la langue

lorsque le BD-ROM/DVD VIDEO en contient plusieurs. Slectionne la plage sonore du CD.

Affiche la liste des canaux de tlvision favoris.

Tlcommande

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPTI O

N S

HOME

TO O

LS

9

0

6

32

5

87

4

1

1

2

4

3

5

6 7

8

9

q;

qa

qs

qd

AMP

AMP

AMP

AMP

AMP

AMP

FR

SUBTITLE (page 75)/CC Slectionne la langue de sous-

titres lorsque le BD-ROM/DVD VIDEO en contient plusieurs.

Change les sous-titres du tlviseur.

ANGLE/WIDE Permute sur dautres angles de

vue lorsque le BD-ROM/DVD VIDEO en contient plusieurs.

Change le rapport de format du tlviseur raccord.

F REPEAT Fait plusieurs fois la lecture des

plages musicales. Appuyez plusieurs fois sur cette touche pour slectionner la rptition de toutes les plages, la rptition dune plage et dsactiver la fonction.

SHUFFLE Fait la lecture de tous les disques

audio en ordre alatoire. Appuyez sur cette touche pour basculer entre la lecture alatoire et normale.

ALL DISCS Fait la lecture de tous les disques

audio ou de photos dans le lecteur. Fait la lecture rpte ou alatoire de toute la musique pendant la Lecture rpte ou la Lecture alatoire. Le tmoin ALL DISCS sallume sur lafficheur du panneau avant. Pour annuler, appuyez de nouveau sur la touche.

G TIME Affiche le temps de lecture coul/

restant sur lafficheur du panneau avant. Chaque fois que vous appuyez sur la touche, lafficheur change, comme suit.

Lors de la lecture dun BD-ROM/DVD VIDEO

Temps coul du titre actuel r

Temps restant du titre actuel

Lors de la lecture dun CD Temps coul de la plage actuelle

r Temps restant de la plage actuelle

r Temps coul du disque actuel

r Temps restant du disque actuel

DISPLAY (page 16)

Lors de la lecture dune vido ou dune photo Affiche lcran linformation du disque ou du fichier.

Lors de la lecture de la musique Affiche les informations de lecture sur lafficheur du panneau avant. Chaque fois que vous appuyez sur la touche, lafficheur change, comme suit : Temps de lecture t Nom de la plage t Nom de lalbum

Lors de laffichage du menu daccueil Affiche licne de la catgorie/nom du groupe/ordre de tri et le guide de fonctionnement actuellement slectionns.

H Touches de couleur (RED/ GREEN/BLUE/YELLOW)

Touches de raccourci pour slectionner les options dans certains menus du BD (servent aussi aux commandes interactives Java du BD).

I TOP MENU (page 40)/GUIDE Ouvre ou ferme le menu

suprieur dun BD ou dun DVD. Affiche le guide de

programmation lectronique numrique.

POP UP/MENU (page 40)/GUI MODE

Ouvre ou ferme le menu contextuel dun BD-ROM ou le menu du DVD.

Bascule entre les modes GUI MODE et DISPLAY MODE.

OPTIONS (page 39, 45, 49)/ TOOLS

Le menu des options disponibles apparat sur lcran.

HOME (page 15, 38, 64)

Accde au menu daccueil ou le quitte.

RETURN

Revient laffichage prcdent.

AMP

AMP

AMP

AMP

AMP

,suite

13

14FR

B/V/v/b

Dplace la surbrillance pour slectionner une option affiche.

(entre)

Valide loption slectionne.

J SORT Change lordre des titres. Chaque

fois que vous appuyez sur la touche, la liste est trie en fonction de loption slectionne.

GROUP Affiche les titres par catgorie.

Chaque fois que vous appuyez sur la touche, la liste permute sur la catgorie slectionne.

K . PREV/NEXT > (prcdent/suivant)

Saute au chapitre, la plage ou au fichier prcdent/suivant. Pour aller au dbut de la plage prcdente, appuyez deux fois sur . PREV.

REPLAY/ADVANCE (relecture instantane/avance instantane)

Relit la scne/fait avancer rapidement la scne un bref instant.

m/M (recul rapide/avance rapide)

Fait avancer/reculer rapidement le disque lors de la pression pendant la lecture. Chaque fois que vous appuyez sur la touche, la vitesse de recherche change, comme suit* : Sens de lecture M1 (10) t M2 (30) t M3 (120) Sens inverse n (1) t m1 (10) t m2 (30) t m3 (120) Si vous appuyez sur la touche de manire continue, le recul rapide ou lavance rapide continue la vitesse slectionne jusqu ce que vous libriez la touche. * La vitesse de recherche ne change pas lors de

la lecture dun CD. Les valeurs de multiplication de la vitesse sont approximatives.

Pour rtablir la lecture normale, appuyez sur N PLAY.

Pour faire la lecture vitesse lente, en arrt sur image (en direction de la lecture seulement) Fait la lecture des BD/DVD au ralenti lorsque vous appuyez sur M pendant plus dune seconde en mode de pause. Lit une image la fois lorsque vous appuyez brivement sur M en mode de pause. Pour rtablir la lecture normale,

appuyez sur N PLAY.

N PLAY (page 38) Lance ou relance la

lecture. Lit un diaporama lorsquun disque qui contient des fichiers dimage JPEG est insr.

SCENE SEARCH (page 41) Permute en mode Chercher

scne, ce qui vous permet de vous dplacer rapidement entre les scnes du titre en cours de lecture.

X PAUSE (page 39) Fait une pause ou relance

la lecture.

x STOP Arrte la lecture et

mmorise le point darrt (point de reprise) (page 39, 46).

L MUTING (page 60) Coupe le son de faon

temporaire.

VOLUME/TV VOL +/ (page 60)

Rgle le volume.

DISC SKIP (page 39, 46, 50)/TV CH (canal) +/

Slectionne le disque dont vous dsirez faire la lecture. Appuyez plusieurs fois sur DISC SKIP+/ jusqu ce que vous trouviez le disque lire. Lorsque vous librez la touche, la lecture du disque slectionn dmarre.

Slectionne les canaux de tlvision vers le haut et le bas.

AMP

AMP

AMP

AMP

FR

M DIMMER Ajuste lclairage de lafficheur

du panneau avant.

RENTAL SLOT (page 36) Ouvre ou ferme le panneau avant

afin de faire la lecture dun disque dans la fente numro 1.

LOAD (page 52) Lit linformation de tous les

disques inconnus et les charge dans la mmoire.

Guide des menus OSD (affichage sur cran)

Le menu daccueil apparat lorsque vous appuyez sur la touche HOME et vous permet de slectionner un disque ou une option de rglage.

A Icnes de catgorie Vido : Donne la liste des

disques qui contiennent une vido. Musique : Donne la liste des

disques qui contiennent de la musique. Photo : Donne la liste des disques

qui contiennent des photos. Config. : Donne la liste des

options de rglage.

B Disques, Listes de lecture Les icnes de disques indiquent les informations suivantes :

Autres disques : Groupe de disques invalides ou un disque de mise jour de version

Disques inconnus : Groupe de disques non identifis

Listes de lecture : Groupe de listes de lecture de musique

(icne de disque) : Disques dont limage de la pochette ne peut tre obtenue dans la base de donnes Gracenote.

C Icnes dinformation de disque : Genre de musique : Genre de film : Artiste de musique/Distribution de

film : Ralisateur du film

Affichage du menu daccueil

,suite

15

16FR

Pour afficher des informations en haut et en bas de lcran Appuyez sur la touche DISPLAY. Appuyez de nouveau sur la touche pour teindre laffichage.

A Informations de lentte Affiche le nom du dossier/de la catgorie et le type de liste actuellement slectionns (nom de groupe/ordre de tri)

B Informations du pied de page Affiche les touches disponibles et leurs fonctions

Pour la lecture vido et de photos, appuyez sur la touche DISPLAY pour allumer ou teindre laffichage. Les informations qui saffichent varient suivant le type de disque et ltat du lecteur.

Lors de la lecture dun BD-ROM/DVD VIDEO

A Langle actuellement slectionn

B Numro ou nom de titre

C Le rglage audio ou de sous-titres actuellement slectionn

D Fonctions disponibles ( angle/ audio/ sous-titres)

E Informations de lecture Affiche le Type de disque/Mode de lecture/Codec vido/Dbit binaire/ Barre dtat de lecture/Temps de lecture (Temps restant*)

F Rsolution de sortie/Frquence vido

* Saffiche lorsque vous appuyez plusieurs fois sur TIME.

z Vous pouvez aussi vrifier les informations de

lecture sur lafficheur du panneau avant (page 10).

Appuyez sur SUBTITLE, AUDIO ou ANGLE pour vrifier les informations respectives.

Lors de la lecture dun fichier de photo

A Nom du fichier

B Nom de lalbum

C Date de prise

D tat de pivotement

E Type de disque/tat de lecture

F Numro du fichier actuel/nombre total de fichiers

Affichages lcran pendant la lecture

FR

Lors de la lecture dun CD de musique/ plage audio MP3

A Nom de la plage/du fichier

B Mode audio

C Informations de lecture Affiche le Type de disque/Barre dtat de lecture/Numro de plage/Temps de lecture

D Informations de la plage Affiche le Nom de lartiste/Nom de lalbum/Nom du genre/Mode de lecture

17

18FR

Mise en route

Raccorder le lecteur Vrifiez la prsence des lments suivants. Cble audio/vido (fiche phono 3) (1) Cordon dalimentation (1) Unit de commande distance

(tlcommande) (1) Piles AA (R6) (2)

Suivez les tapes 1 9 pour raccorder le lecteur et ajuster ses rglages. Ne branchez pas le cordon dalimentation avant davoir atteint tape 5 : Brancher le cordon dalimentation (page 31).

FR

M ise en route

tape 1 : Raccordement au tlviseur Le lecteur est dot des prises vido suivantes. Utilisez celle qui correspond au type de prise dentre du tlviseur pour y raccorder le lecteur. Si vous raccordez le lecteur au tlviseur laide dun cble HDMI, vous pouvez profiter dune image et dun son numriques de qualit suprieure par la prise HDMI OUT.

b Branchez les cbles fond pour viter le bruit

indsirable. Reportez-vous aux instructions fournies avec les

composants raccorder. Il nest pas possible de raccorder ce lecteur un

tlviseur qui na pas de prise dentre vido. Nappliquez pas une trop forte pression sur les

cbles de connexion. La pression contre la paroi du meuble, etc. peut abmer le cble.

Pour raccorder le lecteur un tlviseur avec entre DVI Utilisez un cble convertisseur HDMI-DVI (non fourni). Comme la prise DVI naccepte pas les signaux audio, vous devez utiliser une autre connexion audio en plus de cette connexion (page 24). De plus, il nest pas possible de raccorder la prise HDMI OUT des prises DVI non conformes HDCP (ex. prises DVI de moniteur dordinateur).

Type de prise Rsolution vido Raccordement

Qualit suprieure

Qualit normale

Numrique Haute dfinition : 1080/24p, 1080p, 1080i, 720p Dfinition normale : 480p, 480i

Voir Raccordement une prise HDMI (page 20).

Analogique Haute dfinition : 1080i, 720p Dfinition normale : 480p, 480i

Voir Raccordement aux prises vido composantes (Y/PB/ PR) (page 22).

Dfinition normale : 480i

Voir Raccordement une prise audio/vido ou S VIDEO (page 23).

Dfinition normale : 480i

Voir Raccordement une prise audio/vido ou S VIDEO (page 23).

,suite

19

20FR

Raccordez le lecteur au tlviseur laide dun cble HDMI pour profiter dune image et dun son numriques de qualit suprieure par la prise HDMI OUT. Si vous raccordez le lecteur un tlviseur Sony compatible avec la fonction Contrle pour HDMI (BRAVIA Sync) (page 57), reportez-vous au mode demploi fourni avec le tlviseur. Si vous raccordez le lecteur un tlviseur compatible 1080/24p ou 1080p, utilisez un cble HDMI haute vitesse.

Remarques sur le raccordement la prise HDMI OUT Respectez les points suivants, car une manipulation inadquate peut abmer la prise HDMI OUT et le connecteur. Alignez soigneusement la prise HDMI

OUT, qui se trouve larrire du lecteur, au connecteur HDMI, en vrifiant leur forme respective. Assurez-vous que le connecteur nest pas lenvers ou inclin.

Avant de dplacer le lecteur, noubliez pas de dconnecter un cble HDMI.

Si vous placez le lecteur sur un meuble avec un cble HDMI branch, nappliquez pas une pression excessive sur la paroi du meuble. Cela risquerait dabmer la prise HDMI OUT ou le cble HDMI.

Lors du branchement ou de la dconnexion, ne faites pas tourner ou pivoter le connecteur HDMI.

Raccordement une prise HDMI

Tlviseur

Lecteur Blu-ray Disc/DVD

Cble HDMI (non fourni)

FR

M ise en route

b Les tlviseurs haute dfinition ne sont pas tous

entirement compatibles avec ce produit et certains peuvent causer laffichage dartfacts sur limage. En cas de problme avec une image balayage 480i/480p/720p/1080i/1080p, il est recommand de permuter la connexion sur la prise VIDEO OUT (VIDEO ou S VIDEO). Pour toute question concernant la compatibilit du tlviseur avec ce modle de lecteur Blu-ray Disc/DVD 480i/480p/720p/1080i/1080p, veuillez vous informer auprs du centre de service la clientle.

Si limage nest pas claire, pas naturelle ou pas satisfaisante, changez la rsolution de sortie vido ltape 3 de Format de la Sortie Vido , dans la configuration de Rglages vido (page 67).

Vous devez utiliser uniquement un cble HDMI qui porte le logo HDMI.

,suite

21

22FR

Raccordez les prises COMPONENT VIDEO OUT du lecteur et du tlviseur laide dun cble vido composantes ou de trois cbles vido (non fournis) du mme type et de mme longueur. Vous pouvez profiter dune image de qualit suprieure. Noubliez pas de raccorder les prises AUDIO OUT (L/R) laide dun cble audio/vido.

b Lorsque vous raccordez le lecteur au tlviseur laide dun cble vido composantes, dconnectez la fiche vido (jaune) du cble audio/vido.

Raccordement aux prises vido composantes (Y/PB/PR)

Cble vido composantes (non fourni)

(vert) (rouge)(bleu)

: Flux de signal

Faites correspondre la couleur de la fiche avec celle de la prise.

Lecteur Blu-ray Disc/DVD

Tlviseur

Faites correspondre la couleur de la fiche avec celle de la prise.

(vert) (rouge)(bleu)(rouge) (blanc)

(rouge) (blanc)

Cble audio/vido (fourni)

FR

M ise en route

Connectez la prise VIDEO OUT (VIDEO) et les prises AUDIO OUT (L/R) du lecteur et du tlviseur laide du cble audio/vido. Vous pouvez profiter dune image et dun son de qualit normale.

b Si vous raccordez le lecteur au tlviseur laide dun cble S-vido, dconnectez la fiche vido (jaune) du cble audio/vido.

Raccordement une prise audio/vido ou S VIDEO

Cble audio/vido (fourni)

: Flux de signal

Faites correspondre la couleur de la fiche avec celle de la prise.

Lecteur Blu-ray Disc/DVD

Tlviseur

Cble S-vido (non fourni)

ou

(jaune)(rouge) (blanc)

(jaune)(rouge) (blanc)

23

24FR

tape 2 : Raccordement un amplificateur (ampli- tuner) AV Suivant la source, les exigences varient comme suit pour lamplificateur (ampli-tuner) AV et le cble. Pour profiter dun son BD de qualit suprieure, rglez Rglages audio BD sur Direct dans la configuration de Rglages audio (page 73). Pour profiter de laudio auxiliaire et de laudio interactif, rglez Rglages audio BD sur Mixage dans la configuration de Rglages audio (page 73).

*1 Lorsque Rglages audio BD est rgl sur Direct dans la configuration de Rglages audio , les signaux audio dcods par lamplificateur (ampli-tuner) AV sont mis.

*2 Lorsque Rglages audio BD est rgl sur Direct dans la configuration de Rglages audio , le signal audio HD (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio et DTS-HD Master Audio) dcod par le lecteur est mis. Lorsque Rglages audio BD est rgl sur Mixage dans la configuration de Rglages audio , le signal audio DTS-HD est mis en tant quaudio dcod DTS 5.1 canaux.

z Les formats audio de BD/DVD pris en charge

sont spcifis larrire de chaque emballage.

Pour plus de dtails sur les signaux de sortie audio, reportez-vous Signal de sortie audio , page 92.

b Si vous raccordez le lecteur lamplificateur

(ampli-tuner) AV laide dun cble HDMI, effectuez lune des oprations suivantes : raccordez lamplificateur (ampli-tuner) AV au

tlviseur laide dun cble HDMI, ou raccordez le lecteur au tlviseur laide dun

cble vido de type autre que HDMI (cble vido composantes, cble S-vido ou cble audio/vido).

Si vous raccordez un composant non conforme au signal audio slectionn, les enceintes mettront un son trs lev (ou aucun son) pouvant causer des dommages loue ou abmer les enceintes.

Pour profiter de

Source Amplificateur (ampli-tuner) AV

Cble (raccordement)

Audio 7.1 canaux

Dolby TrueHD Amplificateur (ampli- tuner) AV compatible Dolby TrueHD

Cble HDMI*1 (page 25) ou Cble audio 7.1 canaux*2 (page 27)

Dolby Digital Plus

Amplificateur (ampli- tuner) AV compatible Dolby Digital Plus

DTS-HD (DTS- HD High Resolution et DTS-HD Master Audio)

Amplificateur (ampli- tuner) AV compatible DTS-HD

LPCM Amplificateur (ampli- tuner) AV compatible LPCM 7.1 canaux

Audio 5.1 canaux

Dolby Digital Amplificateur (ampli- tuner) AV compatible Dolby Digital

Cble HDMI (page 25), Cble optique numrique/coaxial (page 26), ou Cble audio 7.1 canaux (page 27)

DTS Amplificateur (ampli- tuner) AV compatible DTS

Audio stro Amplificateur (ampli- tuner) AV compatible avec laudio stro

Cble audio stro (page 28)

FR

M ise en route

Si lamplificateur (ampli-tuner) AV est dot dune entre HDMI, vous pouvez profiter dun son ambiophonique. Si vous raccordez le lecteur un amplificateur (ampli-tuner) AV Sony compatible avec la fonction Contrle pour HDMI (page 57), reportez-vous au mode demploi fourni avec lamplificateur (ampli-tuner) AV.

z Effectuez les rglages suivants pour profiter dun son de qualit suprieure via lamplificateur (ampli-tuner) AV raccord. Rglez Priorit de sortie audio sur HDMI

dans la configuration de Rglages audio (page 70).

Rglez Audio (HDMI) sur Auto dans la configuration de Rglages audio (page 73).

Rglez Rglages audio BD sur Direct dans la configuration de Rglages audio (page 73).

b Les amplificateurs (ampli-tuners) AV compatibles HDMI nacceptent pas tous le signal PCM linaire 8 canaux. Reportez-vous aussi au mode demploi fourni avec lamplificateur (ampli-tuner) AV raccord.

Raccordement une prise HDMI

Amplificateur (ampli-tuner) AV

Lecteur Blu-ray Disc/DVD

Tlviseur

Cble HDMI (non fourni)

Cble HDMI (non fourni)

,suite

25

26FR

Si lamplificateur (ampli-tuner) AV est dot dun dcodeur Dolby Digital, Dolby Pro Logic ou DTS et dune prise dentre numrique, vous pouvez profiter des effets ambiophoniques Dolby Digital (5.1 canaux), Dolby Pro Logic (4.0 canaux) ou DTS (5.1 canaux).

1 Raccordez la prise numrique du lecteur celle de lamplificateur (ampli-tuner) AV.

2 Rglez Priorit de sortie audio sur Coaxial/Optique dans la configuration de Rglages audio (page 70).

3 Effectuez les rglages appropris de Dolby Digital et DTS dans la configuration de Rglages audio (page 74). Autrement, les enceintes nmettront aucun son ou mettront un son trs lev.

Raccordement aux prises numriques (OPTICAL/COAXIAL)

Amplificateur (ampli-tuner) AV

Cble optique numrique (non fourni)

Lecteur Blu-ray Disc/DVD

Cble coaxial numrique (non fourni)

ou

: Flux de signal

FR

M ise en route

Si votre amplificateur (ampli-tuner) AV possde des entres 7.1 canaux, vous pouvez profiter dun son ambiophonique multicanal.

1 Raccordez les prises 7.1 canaux du lecteur et de lamplificateur (ampli- tuner) AV.

2 Rglez Priorit de sortie audio sur Analog. multic. dans la configuration de Rglages audio (page 70).

3 Effectuez les rglages appropris de Rglages denceinte dans la configuration de Rglages audio (page 70).

Raccordement aux prises 7.1 canaux

Amplificateur (ampli-tuner) AV

Lecteur Blu-ray Disc/DVD

Cble audio stro (non fourni)

Cble audio monaural (non fourni)

: Flux de signal

Cble audio stro (non fourni)

Cble audio stro (non fourni)

Cble audio monaural (non fourni)

,suite

27

28FR

Si lamplificateur (ampli-tuner) AV est dot uniquement de prises dentre audio L et R, utilisez cette connexion.

Raccordement aux prises audio L/R

Amplificateur (ampli-tuner) AV

Cble audio/vido (fourni)

: Flux de signal

Lecteur Blu-ray Disc/DVD

(blanc)(rouge)

(blanc)(rouge)

Faites correspondre la couleur de la fiche avec celle de la prise.

FR

M ise en route

tape 3 : Insrer une mmoire externe Pour profiter du contenu supplmentaire (tel que BonusView/BD-Live) prsent sur certains titres Blu-ray Disc, vous devrez utiliser une mmoire externe (non fournie). Insrez le dispositif de mmoire externe (mmoire Flash USB de 1 Go ou plus, telle que USM2GL ou USM2GH de Sony) dans la fente EXT en tant quemplacement local de stockage.

Insrez la mmoire externe fond dans la fente EXT. Assurez-vous que le tmoin EXT sallume sur lafficheur du panneau avant lorsque vous allumez le lecteur.

Pour retirer la mmoire externe

1 Appuyez sur [/1 pour teindre le lecteur.

2 Tirez sur la mmoire externe pour la retirer de la fente EXT.

b Ne raccordez rien dautre quune mmoire Flash

USB, tel quun disque dur, etc., la fente EXT. Insrez la mmoire externe bien droit. Si vous

insrez la mmoire externe par la force dans la fente, vous abmerez la mmoire externe et le lecteur.

Gardez la mmoire externe lcart des jeunes enfants pour viter tout risque dabsorption accidentelle.

Nappliquez pas une pression excessive sur la mmoire externe dans la fente, car cela peut causer un dysfonctionnement.

Il est recommand dutiliser la mmoire Flash Sony USM2GL (disponible partir de septembre 2009).

Il se peut que dautres dispositifs Flash USB prennent en charge cette fonction. Nous ne pouvons toutefois pas garantir la compatibilit avec tous les dispositifs de mmoire Flash USB.

Lors de linsertion dune mmoire Flash USB, vrifiez le sens dinsertion avant de linsrer.

Il se peut que certains dispositifs de mmoire Flash USB ne pntrent pas fond dans la fente EXT. Ne forcez pas pour linsrer fond dans la fente, et nappliquez pas de pression sur la partie saillante de la mmoire Flash USB.

Pour viter daltrer les donnes ou daltrer la mmoire externe, teignez le lecteur avant dinsrer ou de retirer la mmoire externe.

Si le tmoin EXT ne sallume pas, teignez le lecteur, retirez et rinsrez la mmoire externe, puis rallumez le lecteur.

La mmoire externe est utilise comme unit locale de stockage pour Bonus View/BD-Live. Insrez une mmoire externe vide ou une qui ne contient que des fichiers de photos ou de musique pour viter daltrer les donnes de la mmoire externe.

Borne vers le haut

Arrire du lecteur

Mmoire externe (non fournie)

29

30FR

tape 4 : Connecter lappareil au rseau Raccordez la borne LAN (100) du lecteur la source Internet laide dun cble rseau pour recevoir linformation de disque ou mettre jour le logiciel du lecteur. Vous pouvez aussi profiter de la fonction BD-Live (page 40).

1 Raccordez la borne LAN (100) du lecteur la source Internet. Les mthodes de connexion la source Internet comprennent : Connexion directe un routeur large

bande Connexion via un routeur LAN sans fil Reportez-vous aussi au mode demploi fourni avec le routeur large bande ou le routeur LAN sans fil.

2 Effectuez les rglages appropris de Rglages Internet dans la configuration de Rglages rseau (page 81).

Pour mettre jour le logiciel du lecteur laide du rseau Voir Mise jour rseau (page 65) et Avis de m--j du logiciel (page 80).

Pour profiter de la fonction BD-Live Voir Profiter de BonusView/BD-Live (page 40).

b Ne connectez pas une ligne de tlphone la

borne LAN (100), car cela pourrait causer un dysfonctionnement.

Pour tirer pleinement profit des fonctions BD- Live, il est recommand dutiliser une connexion Internet dune vitesse relle de 1 Mbps ou plus.

Pour permettre les connexions Internet depuis le contenu BD, slectionnez Permettre dans Connexion Internet BD pendant le Rglage facile (page 32). Pour changer le rglage, voir page 78.

propos des cbles rseau (LAN) Le type de cble rseau (LAN), direct ou crois, varie suivant le modem ou le routeur utilis. Pour plus de dtails sur les cbles rseau (LAN), reportez-vous au mode demploi fourni avec le modem ou le routeur.

Lors de la connexion directe un routeur large bande

Lecteur Blu-ray Disc/DVD

Routeur large bande

vers lordinateur

Internet

Modem ADSL/ Modem par cble

Cble rseau (non fourni)

Cble rseau (non fourni)

FR

M ise en route

b Ne raccordez pas la borne LAN du lecteur la borne LAN de lordinateur.

tape 5 : Brancher le cordon dalimentation Une fois tous les autres raccordements termins, branchez le cordon dalimentation fourni dans la borne AC IN du lecteur. Branchez ensuite le cordon dalimentation du lecteur et celui du tlviseur dans une prise de courant.

Lors de la connexion via un routeur LAN sans fil

Lecteur Blu-ray Disc/DVD

vers lordinateur

Routeur LAN sans fil (point daccs)

Internet

Modem ADSL/ Modem par cble

Convertisseur de support Ethernet/ LAN sans fil

Cble rseau (non fourni)

Cble rseau (non fourni)

vers AC IN1

2 vers la prise de courant

31

32FR

tape 6 : Prparer la tlcommande Vous pouvez commander le lecteur laide de la tlcommande fournie.

Insrer les piles dans la tlcommande Insrez deux piles AA (R6) en faisant correspondre leurs extrmits 3 et # avec les indications lintrieur du logement piles. Lorsque vous utilisez la tlcommande, pointez-la vers le capteur de signal de tlcommande du lecteur (page 9).

b Utilisez les piles correctement pour viter les

risques de fuite et de corrosion. En cas de fuite, ne touchez pas le liquide mains nues. Respectez les points suivants : Nutilisez pas une pile neuve avec une pile use,

ni des piles de fabricants diffrents. Nessayez pas de recharger les piles. Si vous prvoyez laisser la tlcommande

inutilise pour une priode prolonge, retirez les piles.

En cas de fuite des piles, essuyez toute trace de liquide lintrieur du logement piles et insrez des piles neuves.

Nexposez pas le capteur de signal de tlcommande (indiqu par sur le panneau avant) une lumire intense, comme par exemple les rayons directs du soleil ou la lumire dun appareil dclairage. Le lecteur risquerait de ne pas rpondre la tlcommande.

tape 7 : Rglage facile Suivez les tapes ci-dessous pour effectuer le nombre minimum de rglages de base pour lutilisation du lecteur. Si vous nexcutez pas le Rglage facile, il apparatra chaque fois que vous allumerez le lecteur. Effectuez les rglages ci-dessous dans lordre suivant.

1 Appuyez sur AV [/1 pour allumer le tlviseur.

2 Appuyez sur [/1 pour allumer le lecteur. Le lecteur sallume au bout dun moment.

3 Permutez le slecteur dentre du tlviseur de sorte que le signal du lecteur apparaisse sur lcran du tlviseur. Le menu de slection de la langue daffichage sur cran (OSD) apparat. Si le menu de slection de la langue

daffichage sur cran (OSD) napparat pas Appuyez sur HOME et slectionnez Easy Setup (Rgl. facile) dans la configuration de

Lors de la premire mise sous tension Patientez un court moment, jusqu ce que le lecteur sallume et lance le Rglage facile.

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

TV VOL TV CH

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

[/1

B/V/v/b/ RETURN

AV [/1

HOME

FR

M ise en route

Setup (Config.) (page 82). Slectionnez ensuite Start (Dmarrer), puis appuyez sur .

4 Slectionnez une langue pour laffichage sur cran laide de V/v, puis appuyez sur .

Le message de rglages initiaux apparat.

5 Slectionnez Dmarrer , puis appuyez sur .

6 Slectionnez le type de cble utilis pour raccorder le lecteur au tlviseur, puis appuyez sur .

Slectionnez HDMI si vous le raccordez au tlviseur laide dun cble HDMI, puis passez ltape 7.

b Lors du raccordement simultan la prise HDMI OUT et dautres prises de sortie vido, slectionnez Vido composantes .

Slectionnez Vido composantes si vous le raccordez au tlviseur laide dun cble vido composantes, puis passez ltape 7. Slectionnez Vido ou S-Vido si vous le raccordez au tlviseur laide

dun cble vido ou du cble S-vido, puis passez ltape 8.

7 Slectionnez une rsolution de sortie vido pour le tlviseur raccord, puis appuyez sur . Pour plus de dtails sur la rsolution de sortie vido, voir page 68.

Si vous slectionnez HDMI ltape 6

b Lorsque Auto ou 1080p est slectionn et que la prise HDMI OUT et dautres prises de sortie vido sont raccordes simultanment, il se peut que le signal vido ne soit mis que de la prise HDMI. Si vous raccordez dautres appareils en mme temps, appuyez sur RETURN pour revenir ltape 6 et changez le rglage de Mthode de connexion de tlviseur .

Si vous slectionnez Vido composantes ltape 6

Suivez les instructions lcran et passez ltape suivante.

b Si limage est dforme ou si aucune image napparat, patientez environ 30 secondes sans appuyer sur aucune touche. Lafficheur revient lcran de rglage de la rsolution. Si la rsolution de sortie vido slectionne est incorrecte, aucune image napparatra sur lcran si vous appuyez sur une touche dans les 30 secondes qui suivent. Le cas chant, appuyez sur x du lecteur pendant plus de 10 secondes pour rinitialiser la rsolution de sortie vido sur la valeur la plus basse. Pour changer la rsolution de sortie vido, rglez

,suite

33

34FR

Format de la Sortie Vido dans la configuration de Rglages vido (page 67).

8 Slectionnez le rapport de format qui correspond celui du tlviseur, puis appuyez sur .

Slectionnez 16:9 si vous raccordez le lecteur un tlviseur cran large ou un tlviseur dot dune fonction de mode cran large. Slectionnez 4:3 si vous raccordez le lecteur un tlviseur rapport de format 4:3 et sans fonction de mode cran large.

9 (Uniquement lors du raccordement au tlviseur laide dun cble HDMI) Rglez la fonction Contrle pour HDMI sur Oui ou Non , puis appuyez sur .

Slectionnez Oui pour utiliser la fonction Contrle pour HDMI lors du raccordement de composants Sony compatibles avec la fonction Contrle pour HDMI (page 57). Si vous nutilisez pas la fonction Contrle pour HDMI , slectionnez Non .

10 Slectionnez Permettre pour permettre la connexion Internet depuis le contenu BD, puis appuyez sur .

Slectionnez Ne pas permettre pour ne pas permettre la connexion Internet depuis le contenu BD.

11 Rglez le Mode Dmarrage rapide sur Oui ou Non , puis appuyez sur .

Pour plus de dtails sur le Mode Dmarrage rapide , voir page 79.

12 Slectionnez Terminer , puis appuyez sur .

z Vous pouvez rtablir les rglages dusine

(page 82). Vous pouvez excuter de nouveau Rgl.

facile depuis Rgl. facile dans Config. (page 82).

FR

M ise en route

tape 8 : Insrer des disques Vous pouvez insrer jusqu 400 disques dans ce lecteur.

1 Appuyez sur la touche OPEN/CLOSE. Le panneau avant souvre.

2 Tournez le cadran DISC/AMS jusqu ce que vous trouviez la fente de disque o vous souhaitez insrer un disque. Vous pouvez vrifier le numro de la fente de disque indiqu sur lafficheur du panneau avant ou par la fente.

3 Insrez un disque, tiquette vers la droite.

4 Rptez les tapes ci-dessus pour insrer dautres disques.

5 Appuyez sur la touche OPEN/CLOSE. Le panneau avant se ferme. Le plateau rotatif tourne et la dernire fente de disque slectionne est rgle sur la position de lecture.

z Pour avancer de 100 fentes de disque, appuyez

sur la touche +100 du lecteur. Lorsque le panneau avant est ferm, le disque

insr dans la fente en position de chargement sera automatiquement charg et rgl sur la position de lecture.

b Assurez-vous davoir insr le disque dans

chaque fente angle droit sur le plateau rotatif. La mauvaise insertion dun disque risquerait dabmer le lecteur ou le disque.

Panneau avant

OPEN/CLOSE Cadran DISC/ AMS

+100

DISC EJECT

Numro de fente de disque

Fente de disque la position de chargement

Insrez le disque jusquau fond de la fente.

tiquette vers la droite (face de lecture du disque double couche vers la gauche)

,suite

35

36FR

Si vous laissez tomber un disque dans le lecteur et/ou si le disque ne sinsre pas correctement dans la fente, informez-vous auprs du revendeur Sony le plus prs.

Attendez larrt complet du plateau rotatif avant dinsrer ou de retirer des disques.

Le panneau avant se ferme automatiquement lorsque vous appuyez sur N PLAY. Prenez garde de ne pas mettre la main dans le lecteur aprs avoir appuy sur N PLAY, car elle pourrait se coincer dans le panneau avant.

Pour retirer des disques

1 En vrifiant le numro de fente de disque indiqu sur lafficheur du panneau avant ou par la fente, tournez le cadran DISC/ AMS pour localiser le disque que vous dsirez retirer.

2 Apuyez sur la touche DISC EJECT. Le disque slectionn est rgl sur la position de chargement et le panneau avant souvre. Le disque de la fente slectionne se dplace vers le haut.

3 Retirez le disque. Rptez les tapes ci-dessus pour retirer dautres disques.

4 Appuyez sur la touche OPEN/CLOSE. Le panneau avant se ferme.

z Pour retirer le disque actuel, appuyez directement sur la touche DISC EJECT du lecteur.

b Ne faites pas tourner le plateau rotatif

manuellement. Nessayez pas dinsrer la main lintrieur du

logement du plateau rotatif. Respectez toujours la bonne marche suivre pour linsertion et le retrait des disques.

Retirez tous les disques du lecteur avant de le transporter. Laisser des disques lintrieur risquerait dabmer le lecteur.

Lorsque vous fermez le panneau avant, prenez garde de ne rien coincer entre le panneau et le lecteur.

Lorsque vous appuyez sur la touche RENTAL SLOT, la fente numro 1 est rgle sur la position de chargement pour faciliter la lecture ou le retrait dun disque de location.

1 Appuyez sur la touche RENTAL SLOT. La fente numro 1 est rgle sur la position de chargement et le panneau avant souvre.

2 Insrez un disque.

3 Appuyez sur la touche RENTAL SLOT. Le panneau avant se ferme et la fente numro 1 est rgle sur la position de lecture.

Pour retirer le disque

1 Appuyez sur la touche RENTAL SLOT. La fente numro 1 est rgle sur la position de chargement et le panneau avant souvre.

2 Retirez le disque.

z Lorsque le panneau avant souvre, appuyez sur RENTAL SLOT pour rgler la fente numro 1 sur la position de chargement.

Disque ject

DISC EJECT

Insrer un disque de location

RENTAL SLOT

FR

M ise en route

tape 9 : Charger linformation de disque Le lecteur lit linformation de disque de tous les disques inconnus et la charge en mmoire afin dafficher le type de disque, les titres et dautres informations sur la liste.

Appuyez sur DISC LOAD lorsque le menu daccueil du lecteur saffiche lcran du tlviseur. Le chargement dmarre. Le lecteur accde la base de donnes Gracenote pour obtenir linformation de disque. Une fois le chargement termin, la liste des titres saffiche.

Pour annuler le chargement Appuyez sur x (arrt). Les donnes charges sont enregistres.

z Les disques dont linformation ne figure pas dans

la base de donnes Gracenote safficheront comme Aucun nom dans la liste des titres.

Le lecteur ne peut pas charger linformation de disque pendant la lecture. Vous devez arrter la lecture et afficher le menu daccueil avant dappuyer sur DISC LOAD. Lorsque vous regardez une photo ou une vido, appuyez sur x (arrt). Lors de la lecture de la musique, appuyez sur RETURN.

Le chargement dinformation de disque denviron 300 ou 400 disques la fois peut prendre un bon moment pour sexcuter. Le dlai de chargement dpend de la vitesse de votre rseau.

Les disques qui narrivent pas senregistrer lors du chargement saffichent comme Disques inconnus dans la liste des titres. Vous pouvez les enregistrer manuellement (page 53).

DISC LOAD

x

37

38FR

Lecture

Lire les BD/DVD

1 Permutez le slecteur dentre du tlviseur de sorte que le signal du lecteur apparaisse sur lcran du tlviseur.

2 Appuyez sur HOME.

3 Slectionnez (Vido) laide de B/b.

Guide dinformation de disque

A Pochette de disque

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

x STOP

OPTIONS

X PAUSE

N PLAY

B/V/v/b/

HOME

DISC SKIP+/

DISPLAY

FR

Lecture

B Numro de fente

C Titre (Anne de sortie)

D Classement/ Nom du ralisateur/ Nom de la distribution/ Genre

4 Slectionnez un disque laide de V/v, puis appuyez sur N PLAY.

Pour slectionner un titre Sil sagit dun BD ou DVD enregistr sur un autre appareil, vous pouvez slectionner un titre.

1 Suivez les tapes 1 3 de la section Lire les BD/DVD (page 38).

2 Slectionnez un disque laide de V/v, puis appuyez sur . Les titres saffichent.

3 Slectionnez un titre laide de V/v, puis appuyez sur N PLAY.

OPTIONS disponibles Lorsque vous appuyez sur OPTIONS, le menu doptions apparat. Les options disponibles varient suivant la situation.

1 Appuyez sur OPTIONS. Le menu doptions apparat.

2 Slectionnez une option laide de V/v, puis appuyez sur .

OPTIONS disponibles lcran de liste

OPTIONS disponibles pendant la lecture

Diverses commandes de lecture vido Options Dtails

Charger tous disques

Charge les informations de tous les disques.

Trier par Change lordre des titres. Nom de titre Numro de fente Anne de sortie

Grouper contenus

Affiche les titres par catgorie. Tous les titres Par genre Par distribution Par ralisateur

Lecture Reprend la lecture depuis le point darrt. La fonction de reprise de lecture est annule lorsque : Le disque est chang.

Dmarrer Lance la mise jour (page 66).

diter Modifie linformation de disque (page 54).

Charger Charge linformation de disque (page 52).

jecter jecte le disque.

Options Dtails

Rglages A/V Ajuste les rglages pour limage et le son. Rglages vido (page 43) Rglages audio (page 44)

Lire du dbut Lit le titre partir du dbut.

Menu suprieur

Affiche le Menu suprieur du disque (page 40).

Menu/Menu contextuel

Affiche le Menu contextuel du BD-ROM ou le menu du DVD (page 40).

Arrt Arrte la lecture.

Rech. Titre Cherche un titre et lance la lecture au dbut du titre (page 42).

Rech. Chap. Cherche un chapitre et lance la lecture au dbut du chapitre (page 42).

jecter jecte le disque.

Touches Commandes

N PLAY Lance la lecture partir du point o vous avez appuy sur x STOP.

x STOP Arrte la lecture.

X PAUSE Fait une pause de lecture.

DISC SKIP+/ Change le disque.

DISPLAY Affiche linformation de disque.

Options Dtails

,suite

39

40FR

Pour afficher le menu suprieur Lors de la lecture dun BD ou dun DVD, vous pouvez afficher le menu suprieur.

1 Appuyez sur TOP MENU pendant la lecture. Le menu suprieur apparat.

2 Slectionnez une option laide de B/V/v/b.

Pour afficher les menus contextuels Certains BD-ROM contiennent des menus contextuels qui apparaissent sans interrompre la lecture.

1 Appuyez sur POP UP/MENU pendant la lecture. Le menu contextuel apparat.

2 Slectionnez une option laide de B/V/v/b, des touches de couleur ou des touches numriques, puis suivez les instructions lcran.

Certains BD-ROM contiennent du contenu en bonus et autres donnes tlchargeables sur la mmoire externe (unit locale de stockage) pour votre divertissement.

1 teignez le lecteur.

2 Insrez la mmoire externe (non fournie) dans la fente EXT larrire du lecteur. La mmoire externe est utilise pour le stockage local. Assurez-vous que la mmoire externe est correctement insre dans le lecteur (page 29).

3 Connectez le lecteur un rseau (page 30).

4 Allumez le lecteur.

5 Rglez Connexion Internet BD sur Permettre dans la configuration de Rglages d'affichage BD/DVD (page 78).

6 Insrez un BD-ROM avec contenu BonusView/BD-Live. Le mode de fonctionnement diffre en fonction du disque. Reportez-vous au mode demploi fourni avec le disque.

Utiliser le menu du BD ou du DVD

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S 9

0

6

32

5

87

4

1

POP UP/ MENU

TOP MENU

Touches de couleur

Touches numriques

B/V/v/b/

ENTER

Profiter de BonusView/BD-Live BD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

[/1

B/V/v/b/

HOME OPTIONS

FR

Lecture

Pour supprimer les donnes de la mmoire externe Vous pouvez supprimer les donnes inutiles.

1 Appuyez sur HOME.

2 Slectionnez (Vido) laide de B/b.

3 Slectionnez Donnes BD laide de V/v, puis appuyez sur .

4 Slectionnez le nom de disque, puis appuyez sur OPTIONS.

5 Slectionnez Supprimer , puis appuyez sur .

6 Slectionnez OK , puis appuyez sur .

Les donnes du disque slectionn seront supprimes.

z Pour supprimer dun seul coup toutes les donnes

de la mmoire externe, slectionnez Tout supprimer ltape 5.

Appuyez sur au lieu de OPTIONS ltape 4 pour sauter ltape 5.

b Suivant le type de BD-ROM, il se peut que le nom du disque ne saffiche pas.

Vous pouvez vous dplacer rapidement entre les scnes du titre en cours de lecture.

1 Appuyez sur SCENE SEARCH pendant la lecture ou en mode de pause. La lecture fait une pause et une barre avec indicateur de scne (de forme carre indique le point actuel) apparat au bas de lcran.

2 Dplacez lindicateur de scne jusqu la scne recherche, laide de B/b ou m/M.

Lindicateur de scne, sur la barre, saffiche autour du point en cours de lecture.

Chercher rapidement une scne (Chercher scne)

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH

VOLUME DISC SKIP TV VOL TV CH

DIMMER RENTAL SLOT LOAD

MUTING

STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

X PAUSE

N PLAYSCENE SEARCH

m/M

B/b/

Le point actuel

Indicateur de scne

,suite

41

42FR

3 Librez la touche au point que vous dsirez regarder. La scne qui se trouve au point de libration de la touche saffiche en mode de pause. Pour chercher nouveau une scne, dplacez lindicateur de scne laide de B/b ou m/M.

4 Appuyez sur SCENE SEARCH, , N PLAY ou X PAUSE. La lecture commence.

Pour annuler le mode Chercher scne Appuyez sur SCENE SEARCH, , N PLAY ou X PAUSE. La lecture commence au point o vous appuyez sur la touche.

b La fonction Chercher scne est disponible pour

les titres dune longueur suprieure 100 secondes et infrieure 100 heures.

Il se peut que la fonction Chercher scne ne soit pas disponible sur certains disques.

Vous pouvez chercher un chapitre si le titre contient des repres de chapitre.

1 Appuyez sur OPTIONS pendant la lecture ou en mode de pause. Le menu doptions apparat.

2 Slectionnez une mthode de recherche laide de V/v, puis appuyez sur . Rech. Titre (pour les BD-ROM/DVD VIDEO) Rech. Chap.

Laffichage de saisie du numro apparat. Exemple : Rech. Chap.

3 Saisissez le numro du titre ou du chapitre laide des touches numriques. Si vous faites une erreur, appuyez sur CLEAR et reprenez la saisie du numro.

4 Appuyez sur ENTER. Au bout dun moment, le lecteur lance la lecture partir du numro slectionn.

Chercher un titre/chapitre DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

V/v/

CLEAR

Touches numriques

ENTER

Ajuster limage et le son pour le contenu vido

DVDBD

321

654

987

0

THEATER

ENTER

ENTER

CLEAR

AUDIO SUBTITLE

GROUPSORT

REPLAY NEXTADVANCEPREV

PLAY

PAUSESCENE SEARCH STOP

SHUFFLE ALL DISCS DISPLAYREPEAT

GREEN BLUE YELLOWRED

CC WIDEFAVORITES ANGLE TIME

OPERATION CHANGEOPEN/CLOSE AMP TV BD

AVINPUT

GUIDE GUI MODE

TO P

MENU POP UP/MENU

R ETURN

OPT IO

N S

HOME

TO OL

S

9

0

6

32

5

87

4

1

OPTIONS

B/V/v/b/