Sony BDV-E2100 v2 Operating Instructions PDF

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\010COV.fm

masterpage: Right

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

4-446-733-42(1)

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

Blu-ray Disc/ DVD Home Theatre System Operating Instructions

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\020REG.fm

masterpage: Left

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only.

CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/ DVD Home Theatre System is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Pick-up unit of this appliance is classified as a CLASS 3R LASER product. Visible and invisible laser radiation is emitted when the laser protective housing is opened, so be sure to avoid direct eye exposure. This marking is located on the laser protective housing inside the enclosure.

This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. The nameplate is located on the bottom exterior.

Precautions

On power sources The unit is not disconnected from the mains

as long as it is connected to the AC outlet, even if the unit itself has been turned off.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

WARNING

2US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\020REG.fm

masterpage: Right

On watching 3D video images Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual and/or the caution message of any other device used with, or Blu-ray Disc contents played with this product and (ii) our website (http://esupport.sony.com/) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images. Adults should supervise young children to ensure they follow the recommendations listed above.

Copy Protection Please be advised of the advanced content

protection systems used in both Blu-ray Disc and DVD media. These systems, called AACS (Advanced Access Content System) and CSS (Content Scramble System), may contain some restrictions on playback, analog output, and other similar features. The operation of this product and the restrictions placed may vary depending on the date of purchase, as the governing board of the AACS may adopt or change its restriction rules after the time of purchase.

Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

Copyrights and Trademarks This system incorporates with Dolby*

Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital Surround System.

* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

This system incorporates High-Definition Multimedia Interface (HDMITM) technology. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Java is a trademark of Oracle and/or its affiliates.

3US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\020REG.fm

masterpage: Left

DVD logo is a trademark of DVD Format/ Logo Licensing Corporation.

Blu-ray Disc, Blu-ray, Blu-ray 3D, BD-LIVE, BONUSVIEW, and logos are trademarks of the Blu-ray Disc Association.

Blu-ray Disc, DVD+RW, DVD-RW, DVD+R, DVD-R, DVD VIDEO, and CD logos are trademarks.

BRAVIA is a trademark of Sony Corporation.

AVCHD 3D/Progressive and the AVCHD 3D/Progressive logo are trademarks of Panasonic Corporation and Sony Corporation.

, XMB, and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

PlayStation is a registered trademark of Sony Computer Entertainment Inc.

Sony Entertainment Network logo and Sony Entertainment Network are trademarks of Sony Corporation.

Music and video recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright 2000-present Gracenote. Gracenote Software, copyright 2000- present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, the Gracenote logo and logotype, and the Powered by Gracenote logo are either a registered trademark or a trademark of Gracenote, Inc. in the United States and/or other countries.

Wi-Fi, Wi-Fi Protected Access and Wi-Fi Alliance are registered marks of the Wi-Fi Alliance.

Wi-Fi CERTIFIED, WPA, WPA2 and Wi-Fi Protected Setup are marks of the Wi-Fi Alliance.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Android is a trademark of Google Inc. The Bluetooth word mark and logos are

registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

4US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\020REG.fm

masterpage: Right

This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Content owners use Microsoft PlayReady content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady- protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the devices ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Opera Devices SDK from Opera Software ASA. Copyright 1995-2013 Opera Software ASA. All rights reserved.

All other trademarks are trademarks of their respective owners.

Other system and product names are generally trademarks or registered trademarks of the manufacturers. and marks are not indicated in this document.

End User License Information

Gracenote End User License Agreement This application or device contains software from Gracenote, Inc. of Emeryville, California (Gracenote). The software from Gracenote (the Gracenote Software) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (Gracenote Data) from online servers or embedded databases (collectively, Gracenote Servers) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non- commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.

5US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\020REG.fm

masterpage: Left

You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you AS IS. Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Gracenote, Inc. 2009

About These Operating Instructions The instructions in these Operating

Instructions describe the controls on the remote control. You can also use the controls on the unit if they have the same or similar names as those on the remote control.

In this manual, disc is used as a general reference for BDs, DVDs, or CDs unless otherwise specified by the text or illustrations.

The instructions in this manual are for BDV-E6100, BDV-E4100, BDV-E3100, and BDV-E2100. BDV-E6100 is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, BDV-E6100 only.

Some illustrations are presented as conceptual drawings, and may be different from the actual products.

The items displayed on the TV screen may vary depending on the area.

The default setting is underlined.

6US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\010COVTOC.fm

masterpage: Right

7US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

Table of Contents About These Operating Instructions .... 6 Unpacking ............................................ 8 Guide to Parts and Controls ............... 11

Getting Started Step 1: Installing the

Speakers .............................. 15 Step 2: Connecting the

System ................................. 16 Connecting the speakers ....... 16 Connecting the TV .................. 17 Connecting the other

equipment ........................... 18 Connecting the antenna

(aerial) ................................. 19 Step 3: Preparing for Network

Connection .......................... 19 Step 4: Performing the Easy

Setup .................................... 21 Step 5: Selecting the Playback

Source .................................. 22 Step 6: Enjoying Surround

Sound ................................... 22

Playback Playing a Disc .................................... 24 Playing from a USB Device ............... 26 Enjoying music from a Bluetooth

device .......................................... 26 Connecting to a smartphone by

One-touch listening function (NFC) .......................................... 28

Playing via a Network ........................ 30 Available Options .............................. 33

Sound Adjustment Selecting the Audio Format,

Multilingual Tracks, or Channel ....................................... 35

Enjoying Multiplex Broadcast Sound .......................................... 36

Tuner Listening to the Radio ........................ 36

Other Operations Using the Control for HDMI Function

for BRAVIA Sync ................... 38 Setting the Speakers ........................... 38 Using the Sleep Timer ........................ 40 Deactivating the Buttons on the

Unit ............................................. 40 Controlling Your TV with the

Supplied Remote Control ............ 40 Saving Power in Standby Mode ......... 41 Browsing Websites ............................ 41

Settings and Adjustments

Using the Setup Display ..................... 43 [Network Update] .............................. 44 [Screen Settings] ................................ 44 [Audio Settings] ................................. 46 [BD/DVD Viewing Settings] ............. 47 [Parental Control Settings] ................. 47 [System Settings] ............................... 48 [Network Settings] ............................. 49 [Easy Network Settings] .................... 50 [Resetting] .......................................... 50

Additional Information Precautions ......................................... 50 Notes about Discs ............................... 53 Troubleshooting ................................. 53 Playable Discs .................................... 58 Playable Types of Files ...................... 59 Supported Audio Formats .................. 61 Specifications ..................................... 61 Language Code List ........................... 64 Index ................................................... 66

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Left

Unpacking Operating Instructions Quick Setup Guide Speaker Installation Guide Remote control (1) R6 (size AA) batteries (2) FM wire antenna (aerial) (1)

BDV-E6100 only Front speakers (2)

Surround speakers (2)

Center speaker (1)

Subwoofer (1)

Speaker-bottom covers (4)

Bases (4)

Lower parts of the front and surround speakers (4)

Screws (large) (4)

Screws (small) (16)

8US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Right

BDV-E4100 only Front speakers (2)

Surround speakers (2)

Center speaker (1)

Subwoofer (1)

Speaker-bottom covers (2)

Bases (2)

Lower parts of the front speakers (2)

Screws (large) (2)

Screws (small) (8)

BDV-E3100 only Front speakers (2)

Surround speakers (2)

Center speaker (1)

9US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Left

Subwoofer (1)

BDV-E2100 only Front speakers (2)

Surround speakers (2)

Center speaker (1)

Subwoofer (1)

10US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Right

Guide to Parts and Controls For more information, refer to the pages indicated in parentheses.

A "/1 (on/standby) Turns on the unit, or sets it to standby mode.

B Disc tray (page 24) C (N-Mark) (page 29)

Position the NFC-compatible device near this indication to activate the NFC function.

D Play operation buttons Z (open/close) Na) b) (play) xb) (stop) VOL +/a)

./> (previous/next) FUNCTION (page 22) Selects the playback source. a) N and VOL + buttons have a tactile dot.

Use the tactile dot as a reference when operating the unit.

b) Hold down N on the unit for more than 2 seconds, the built-in sound demonstration will be played back on the system. Press x to stop the demonstration.

During the demonstration, the volume level may be higher than the volume level you have set.

E (USB) port (page 26) (BDV-E6100/BDV-E4100/ BDV-E3100 only) Place your fingernail in the slot to open the cover.

F (remote control sensor) G Front panel display H LED indicator

White: Lights up when the unit is turned on. Blue (for Bluetooth status): System is ready for pairing: Flashes

quickly During pairing: Flashes quickly During connection: Flashes Connection is established: Lights up

Front panel

Slot

BDV-E2100 only

Note

11US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Left

A Lights up when stereo sound is received. (Radio only)

B Lights up when repeat play is activated.

C Lights up when the system is playing via the PARTY STREAMING function.

D Lights up when muting is on.

E Lights up when the HDMI (OUT) jack is correctly connected to an HDCP (High-bandwidth Digital Content Protection) compliant equipment with HDMI input.

F Displays the systems status, such as radio frequency, etc. When you press DISPLAY, the stream information/decoding status is displayed when the function is set to TV. The stream information/decoding status may not appear depending on the stream or item being decoded.

When the [Main Unit illumination] is set to [Auto] in [System Settings], the front panel display lights off if you do not operate the unit for about 10 seconds.

A SPEAKERS jacks (page 16)

B TV (DIGITAL IN OPTICAL) jack (page 17)

C LAN (100) terminal (page 19)

D HDMI (OUT) jack (page 17)

E AUDIO IN (L/R) jacks (page 18)

F ANTENNA (FM) terminal (page 19)

Indicators in the front panel display

Note

Rear panel

12US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Right

Number 5, AUDIO, VOL +, and N buttons have a tactile dot. Use the tactile dot as a reference when operating the remote control.

: For TV operations (For details, see Controlling Your TV with the Supplied Remote Control (page 40).)

The system automatically returns to standby mode If any button on the unit or remote control is not pressed within 30 minutes, the system automatically returns to standby mode.

A Z (open/close) Opens or closes the disc tray.

SPEAKERS TVyAUDIO Selects whether TV sound is output from the systems speakers or the TVs speaker(s). This function works only when you set [Control for HDMI] to [On] (page 48).

TV "/1 (on/standby) (page 41)

Turns on the TV or sets it to standby mode.

"/1 (on/standby) (pages 21, 37) Turns on the system or sets it to standby mode.

B Number buttons (pages 37, 41) Enters the title/chapter numbers, preset station number, etc.

AUDIO (page 35) Selects the audio format/track.

SUBTITLE Selects the subtitle language when multilingual subtitles are recorded on a BD-ROM/DVD VIDEO.

C Color buttons Short cut keys for selecting items on some BD menus (can also be used for Java interactive operations on BDs).

D TOP MENU Opens or closes the BDs or DVDs Top Menu.

POP UP/MENU Opens or closes the BD-ROMs Pop- up Menu, or the DVDs menu.

OPTIONS (pages 23, 33, 42) Displays the options menu on the TV screen or in the front panel display. (The location differs depending on the selected function.)

RETURN Returns to the previous display.

Remote control

13US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\030UNP.fm

masterpage: Left

B/V/v/b Moves the highlight to a displayed item.

(enter) Enters the selected item.

E MUSIC EQ Selects the pre-programmed equalizer when listening to music.

HOME (pages 21, 38, 43) Enters or exits the systems home menu.

SOUND MODE (page 22) Selects the sound mode.

SEN Accesses the Sony Entertainment Network online service.

NETFLIX Accesses the NETFLIX online service.

F Playback operation buttons See Playback (page 24).

m/M (fast/slow/freeze frame) Fast reverse/fast forward during playback. Each time you press the button, the search speed changes.

Activates slow-motion play when pressed for more than one second in pause mode.

Plays one frame at a time when pressed in pause mode.

During Blu-ray 3D Disc playback, slow- motion reverse play and single-frame reverse play are not available.

./> (previous/next) Selects the previous/next chapter, track, or file.

N PLAY Starts or re-starts playback (resume play). Activates One-Touch Play (page 38) when the system is on and set to the BD/DVD function.

X PAUSE Pauses or re-starts playback.

x STOP Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder. Stops the built-in sound demonstration.

Radio operation buttons See Tuner (page 36).

TUNING +/

PRESET +/

G MUTING Turns off the sound temporarily.

VOL +/ Adjusts the volume.

TV VOL +/ Adjusts the TV volume.

TV INPUT Switches the TVs input source between the TV and other input sources.

H DISPLAY (pages 25, 30, 37, 42) Displays playback and web browsing information on the TV screen. Displays the preset radio station, frequency, etc., in the front panel display.

I FOOTBALL Produces optimized sound for watching football match broadcasting.

Note

14US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Right

G ettin

g S

tarted

J BLUETOOTH Selects the BT function. When the blue LED indicator lights off during BT function, press to start pairing or connect to paired Bluetooth device.

FUNCTION (page 22) Selects the playback source.

K SLEEP (page 40) Sets the sleep timer.

Step 1: Installing the Speakers Install the speakers by referring to the illustration below.

A Front left speaker (L) B Front right speaker (R) C Center speaker D Surround left speaker (L) E Surround right speaker (R) F Subwoofer G TV

Installing the surround speakers in rear position (Speaker layout: [Standard])

Getting Started

A

D

B

E

F G C

15US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Left

G et

ti n

g S

ta rt

ed

Installing all speakers in front position (Speaker layout: [All Front])

Be sure to select the speakers layout setting (page 39) according to your speakers placement.

Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

Do not lean or hang on a speaker, as it may fall down.

You can install the speakers on a wall. For details, refer to the supplied Speaker Installation Guide.

Step 2: Connecting the System Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. (BDV-E6100/BDV-E4100 only) To assemble the speakers, refer to the supplied Speaker Installation Guide.

When you connect other equipment with a volume control, turn down the volume of the equipment to a level where sound is not distorted.

Connect the speaker cords to match the color of the SPEAKERS jacks of the unit. When connecting to the unit, insert the connector until it clicks.

Note

Tip

AD EBG CF

Note

Connecting the speakers

Gray (Surround right speaker (R))

Purple (Subwoofer)

White (Front left speaker (L))

Red (Front right speaker (R))

Green (Center speaker)

Blue (Surround left speaker (L))

16US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Right

G ettin

g S

tarted

Select one of the following connection methods according to the input jacks on your TV.

Video connection

1) High Speed HDMI cable 2) The Audio Return Channel (ARC) function enables the TV to output sound through the system with

an HDMI connection, without performing the B or C connection below. To set the ARC function on this system, see [Audio Return Channel] (page 48). To check the compatibility of your TVs ARC function, refer to the operating instructions supplied with your TV.

Audio connections If your TVs HDMI jack is not compatible with the ARC function, make an appropriate audio connection (B or C) for listening to TV sound via the systems speakers.

To enjoy TV sound, select TV function for connection B or AUDIO function for connection C.

Connecting the TV

A

A

B C

HDMI cable1) (not supplied)

or 2)

B High quality

C

Standard quality

Note

Optical digital cord (not supplied)

OPTICAL DIGITAL OUT

L

R

AUDIO OUTPUT

Audio cable (not supplied)

17US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Left

G et

ti n

g S

ta rt

ed

If your TV is compatible with Audio Return Channel (ARC) function Connect audio and video jacks of your equipment to the TV. The equipment sound can be output through the TV to the system by just making the HDMI connection A in Connecting the TV (page 17).

If your TV is not compatible with Audio Return Channel (ARC) function To enjoy the equipment sound via this system, make an appropriate audio connection (A or B).

If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 48).

You can enjoy equipment sound by selecting TV function for connection A or AUDIO function for connection B.

Connecting the other equipment

A High quality

B

Standard quality

Note

System Signal flow

TV

: Audio signal : Video signal

Equipment (Set-top box, VCR, PlayStation, or digital satellite receiver, etc.)

A B

Optical digital cord (not supplied)

OPTICAL DIGITAL OUT

L

R

AUDIO OUTPUT

Audio cable (not supplied)

18US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Right

G ettin

g S

tarted

Be sure to fully extend the FM wire antenna (aerial).

After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Step 3: Preparing for Network Connection

To connect the system to your network, perform [Easy Network Settings]. For details, see Step 4: Performing the Easy Setup (page 21).

Select the method based on your LAN (Local Area Network) environment. If you use a wireless LAN

The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings.

If you use other than a wireless LAN Use a LAN cable to connect to the LAN (100) terminal on the unit.

A shielded interface cable (LAN cable), straight or crossover, is recommended.

Connecting the antenna (aerial)

Note

FM wire antenna (aerial) (supplied)

Tip

Tip

Broadband router

LAN cable (not supplied)

19US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Left

G et

ti n

g S

ta rt

ed

Before performing the network settings When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)- compatible, you can easily set the network settings with the WPS button. If not, check the following information in advance, and record it in the space provided below. The network name (SSID*) that

identifies your network**.

If security is set on your wireless network, the security key (WEP key, WPA key)**.

* SSID (Service Set Identifier) is a name that identifies a particular wireless network.

** You need to check the settings of your wireless LAN router to get the information about SSID and security key. For details: visit the following website:

http://www.sony.com/blurayhtsupport/ refer to the operating instructions supplied

with the wireless LAN router consult the manufacturer of the wireless

LAN router

About wireless LAN security Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this system supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment.

x No Security Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data.

x WEP WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices which do not support TKIP/AES to be connected.

x WPA-PSK (TKIP), WPA2-PSK (TKIP)

TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP.

x WPA-PSK (AES), WPA2-PSK (AES)

AES is a security technology that uses an advanced security method distinct from WEP and TKIP. AES assures a higher security level than WEP or TKIP.

20US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Right

G ettin

g S

tarted

Step 4: Performing the Easy Setup Before performing Step 4 Make sure all connections are secure, and then connect the AC power cord (mains lead).

Follow the Steps below to make the basic adjustments and network settings for the system. Displayed items vary depending on the area.

1 Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment.

2 Turn on the TV.

3 Press [/1.

4 Switch the input selector on your TV so that the signal from the system appears on the TV screen. The [Easy Initial Settings] for OSD language selection appears.

5 Perform [Easy Initial Settings]. Follow the on-screen instructions to make the basic settings using B/V/v/b and .

6 After completing the [Easy Initial Settings], press V/v to select [Easy Network Settings], then press . The [Easy Network Settings] display appears.

7 Follow the on-screen instructions to make the network settings using B/V/v/b and . If the system cannot connect to the network, see Network connection (page 57) or Wireless LAN connection (page 57).

To recall the [Easy Network Settings] display

1 Press HOME. The home menu appears on the TV screen.

2 Press B/b to select [Setup].

3 Press V/v to select [Easy Network Settings], then press .

B/V/v/b

21US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Left

G et

ti n

g S

ta rt

ed

Step 5: Selecting the Playback Source Press FUNCTION repeatedly until the function you want appears in the front panel display. When you press FUNCTION once, the current function appears in the front panel display, then each time you press FUNCTION, the function changes cyclically as follows.

BD/DVD t USB t FM t TV t BT t AUDIO

Some functions may be changed via the TV screen by pressing FUNCTION, V/v, and .

You can also press BLUETOOTH on the remote control to select BT function.

Step 6: Enjoying Surround Sound After performing the previous Steps and starting playback, you can easily enjoy pre- programmed sound modes that are tailored to different kinds of sound sources. They bring the exciting and powerful sound of movie theaters into your home.

Press SOUND MODE repeatedly during playback until the mode you want appears in the front panel display or on the TV screen.

Function and playback source

BD/DVD Disc or network device to be played by the system

USB USB device that is connected to the (USB) port (page 11)

FM FM radio (page 36)

TV Equipment (TV, etc.) that is connected to the TV (DIGITAL IN OPTICAL) jack, or a TV compatible with the Audio Return Channel function that is connected to the HDMI (OUT) jack (page 17)

BT Audio contents of a Bluetooth device

AUDIO Equipment that is connected to the AUDIO IN (L/R) jacks (page 18)

Tip

Selecting the sound mode

Auto The system automatically selects [Movie] or [Music] to produce the sound effect depending on the disc or sound stream. 2-channel source: The system simulates

surround sound from 2-channel sources and outputs sound from the 5.1 channel speakers.

Multi-channel source: The system outputs sound from the speakers as it was recorded.

Movie The system provides the optimized sound for watching movies.

Music The system provides the optimized sound for listening to music.

Digital Music Enhancer [Digital Music] The system reproduces an enhanced sound for compressed audio.

Night Suitable for watching movies at night by reducing loud sounds while maintaining clear dialog.

Demo Sound The system provides ear-catching sound, suitable for demonstration.

22US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\040GET.fm

masterpage: Right

G ettin

g S

tarted

To select the sound mode from the option menu

1 Press OPTIONS and V/v to select [Sound Mode], then press .

2 Press V/v to select the sound mode, then press .

To select the pre- programmed music equalizer

Press MUSIC EQ repeatedly during playback. You can select the sound to suit your preference. Each time you press the button, the setting changes cyclically as follows. [Standard] t [Rock] t [Hiphop] t [Electronica]

You can also select the music equalizer by using the option menu in [Music] sound mode.

The sound mode can be selected only when [Sound Effect] is set to [Sound Mode On] (page 46). When [Sound Effect] is set to other than [Sound Mode On], the sound mode setting does not apply.

To enjoy 2-channel source such as a CD in multi- channel output, we recommend you to select [Auto].

Press FOOTBALL during playback. [Football] appears on the TV screen. You can experience a feeling of presence in the stadium when watching a football match broadcasting. To turn off the football mode, press FOOTBALL again to select [Football Off]. The sound mode is changed to the last selected sound mode.

Depending on the source, the football mode may not work well.

The football mode will be turned off when you turn off the system.

You can also select the football mode from the option menu.

Note

Tip

Selecting the football mode

Note

Tip

23US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

Playing a Disc For playable discs, see Playable Discs (page 58).

1 Switch the input selector on your TV so that the signal from the system appears on your TV screen.

2 Press Z, and place a disc on the disc tray.

3 Press Z to close the disc tray. Playback starts. If playback does not start automatically, select in the

[Video], [Music], or [Photo] category, and press .

Some BD-ROMs with BD-LIVE Logo* have bonus content and other data that can be downloaded for enjoyment.

*

1 Connect the USB device to the (USB) port (page 26).

For local storage, use a 1 GB or larger USB memory.

2 Prepare for BD-LIVE (BD-LIVE only). Connect the system to a network

(page 19). Set [BD Internet Connection] to

[Allow] (page 47).

3 Insert a BD-ROM with BONUSVIEW/BD-LIVE. The operation method differs depending on the disc. Refer to the operating instructions of the disc.

To delete data in the USB memory, select [Delete BD Data] in [Video], and press . All data stored in the buda folder will be deleted.

Playback Enjoying BONUSVIEW/ BD-LIVE

Tip

24US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Right

P layb

ack

You can enjoy Blu-ray 3D Discs with the 3D logo*.

*

1 Prepare for Blu-ray 3D Disc playback. Connect the system to your

3D-compatible TV using a High Speed HDMI cable (page 17).

Set [3D Output Setting] and [TV Screen Size Setting for 3D] in [Screen Settings] (page 44).

2 Insert a Blu-ray 3D Disc. The operation method differs depending on the disc. Refer to the operating instructions supplied with the disc.

Refer also to the operating instructions of your 3D-compatible TV.

You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and system status.

Example: when playing a BD-ROM

A Output resolution/Video frequency

B Title number or name

C The currently selected audio setting

D Available functions ( angle, audio, subtitle)

E Playback information Displays play mode, playing status bar, disc type, video codec, bit rate, repeat type, elapsed time, total playing time

F Chapter number

G The currently selected angle

Enjoying Blu-ray 3D

Tip

Displaying the playback information

25US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

Playing from a USB Device You can play video/music/photo files on a connected USB device. For playable types of files, see Playable Types of Files (page 59).

1 Connect the USB device to the (USB) port.

Refer to the operating instructions of the USB device before connecting.

2 Press HOME. The home menu appears on the TV screen.

3 Press B/b to select [Video], [Music], or [Photo].

4 Press V/v to select [USB device], then press .

Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off before connecting or removing the USB device.

Enjoying music from a Bluetooth device

Bluetooth wireless technology is a short- range wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about 10 meters (33 feet). You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology. Bluetooth wireless technology is a global standard supported by thousands of companies. These companies produce products that meet the global standard.

Supported Bluetooth version and profiles Profile refers to a standard set of capabilities for various Bluetooth product capabilities. This system supports the following Bluetooth version and profiles. Supported Bluetooth version: Bluetooth Specification version 3.0 Supported Bluetooth profiles: A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile)

Note

About the Bluetooth wireless technology

26US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Right

P layb

ack

To be able to use the Bluetooth function, the Bluetooth device to be connected must support the same profile as this system. Even if the device supports the same profile, the functions may differ depending on the specifications of the Bluetooth device.

The audio playback on this system may be delayed from that on the Bluetooth device because of the characteristics of the Bluetooth wireless technology.

Pairing is an operation where Bluetooth devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again.

1 Place the Bluetooth device within 1 meter (3.3 feet) from the unit.

2 Press BLUETOOTH. You can also select [Bluetooth AUDIO] from [Input] in home menu.

3 Set the Bluetooth device in pairing mode. For details on setting the Bluetooth device in pairing mode, refer to the operating instructions supplied with the device.

4 Select BLU-RAY HOME THEATRE SYSTEM on the Bluetooth device display. Perform this step within 5 minutes, otherwise pairing will be canceled.

If passkey is required on the Bluetooth device, enter 0000. Passkey may be called Passcode, PIN code, PIN number or Password.

5 Once pairing is completed, the device is automatically connected to the system. Device name appears on the TV screen.

You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one.

6 Start playback on the Bluetooth device.

7 Adjust the volume. Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the unit.

To cancel pairing operation Press HOME or FUNCTION.

You can connect to a Bluetooth device from this unit. Check the following before playing music: The Bluetooth function of the Bluetooth

device is turned on. The pairing has been completed

(page 27).

1 Press BLUETOOTH.

To connect to the most recent connected Bluetooth device, press N. Then proceed to Step 5.

2 Press OPTIONS.

Note

Pairing this system with a Bluetooth device

Note

Note

Connecting to a Bluetooth device from this system

Note

27US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

3 Press V/v repeatedly to select [Device List], then press . A list of paired Bluetooth devices appears.

4 Press V/v repeatedly to select the device you want, then press

.

5 Press N to start playback.

6 Adjust the volume. Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the unit.

Once the unit and the Bluetooth device are connected, you can control playback by pressing N, X, x, m/M and ./>.

To disconnect the Bluetooth device Press HOME, FUNCTION or RETURN.

To delete a paired Bluetooth device from the device list

1 Follow Steps 1 to 3 above.

2 Press V/v repeatedly to select the device, then press OPTIONS.

3 Press V/v repeatedly to select [Remove], then press .

4 Follow the on-screen instructions to delete the device using B/V/v/b and

.

While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.

Connecting to a smartphone by One- touch listening function (NFC) By holding an NFC-compatible smartphone near to the on the unit, the unit and smartphone proceed to complete pairing and the Bluetooth connection automatically.

What is NFC? NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by holding the device near the on the NFC-compatible devices.

1 Download and install the app NFC Easy Connect. NFC Easy Connect is a free app for Android smartphones that can be obtained on Google Play. Search for the app using the keyword NFC Easy Connect on the site, or access the download site directly by reading the two-dimensional code below. Note that NFC Easy Connect is free but data communication fees when downloading are charged separately.

Note

Note

Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 4.0.x, excluding Android 3.x)

28US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Right

P layb

ack

Two-dimensional code* for direct access * Use a two-dimensional code reader app.

The app may not be available in some countries/regions.

2 Start the NFC Easy Connect app on the smartphone. Make sure that the application screen is displayed.

3 Hold the smartphone near to the on the unit until the

smartphone vibrates.

Vibration cue is provided when the smartphone is recognized by the unit. After being recognized by the unit, follow the on-screen instructions displayed on the smartphone, and complete the procedure for Bluetooth connection. When the Bluetooth connection is established, the blue LED indicator on the front panel stops flashing. The playback time appears in the front panel display.

The system only can recognizes and connects to one NFC-compatible device at a time.

Depending on your smartphone, you may need to turn on the NFC function on your smartphone in advance. For details, refer to the operating instructions of the smartphone.

If pairing and the Bluetooth connection fail, do the following. Relaunch NFC Easy Connect and move the

smartphone slowly over the . Remove the case from the smartphone if using

a commercially available smartphone case.

To listen to music Start playback of an audio source on the smartphone. For details on playback operations, refer to the operating instructions of your smartphone.

If the volume level is low, adjust the volume of the smartphone first. If the volume level is still too low, adjust the volume level on the unit.

To stop playback The playback will be stopped when you perform any of the following items: Hold the smartphone near to the on

the unit again. Stop the music player of the smartphone. Turn off the unit or the smartphone. Change the function. Disable the Bluetooth function on the

smartphone.

Note

Note

Tip

Tip

29US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

Playing via a Network

Sony Entertainment Network serves as a gateway delivering selected Internet content and a variety of on-demand entertainment straight to your unit.

Some Internet content requires registration via a PC before it can be played. For further details, visit the following website: http://www.sony.com/blurayhtsupport/

Some Internet content may not be available in some countries/regions.

1 Prepare for Sony Entertainment Network. Connect the system to a network (page 19).

2 Press SEN.

3 Press B/V/v/b to select the Internet content and a variety of on-demand entertainment, then press .

Video streaming control panel The control panel appears when a video file starts playing. The displayed items may differ depending on the Internet content provider. To display again, press DISPLAY.

A Control display Press B/V/v/b or for playback operations.

B Playing status bar Status bar, cursor indicating the current position, playing time, duration of the video file

C Network condition indicator Indicates signal strength for a

wireless connection. Indicates a wired connection.

D Network transmission speed

E The next video file name

F The currently selected video file name

Enjoying Sony Entertainment Network (SEN)

Tip

30US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Right

P layb

ack

You can play video/music/photo files on other DLNA-certified equipment by connecting them to your home network.

This unit can be used as a player and renderer. Server: Stores and shares digital media

contents Player: Finds and plays digital media

content from the DMS Renderer: Receives and plays files from

the server, and can be operated by another equipment (controller)

Controller: Operates the renderer equipment

Prepare for using the DLNA function. Connect the system to a network

(page 19). Prepare other DLNA-certified

equipment. For details, refer to the operating instructions of the equipment.

To play files stored on a DLNA server via the system (DLNA Player) Select the DLNA server icon from

[Video], [Music], or [Photo] in the home menu, then select the file that you want to play.

To play remote files by operating the system (Renderer) via a DLNA controller You can operate the system with a DLNA-certified controller (a mobile phone, etc), when playing files stored on a DLNA server.

For details on operation, refer to the operating instructions of the DLNA controller.

Do not operate the system with the supplied remote control and a DLNA controller at the same time.

The system is compatible with the Play To function of Windows Media Player 12 that comes standard with Windows 7.

Playing files on a Home Network (DLNA)

Player Player (This system)

Server

Note

Tip

Player (This system)

Server

Controller

Renderer (This system)

Server

31US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

You can play the same music at the same time on all Sony equipment which are compatible with the PARTY STREAMING function and connected to your home network. Contents in [Music] and the FM, BT and AUDIO functions can be used with the PARTY STREAMING function.

There are two kinds of PARTY STREAMING-compatible equipment. PARTY host: Plays and sends music. PARTY guest: Plays music that is

received from PARTY host.

This unit can be used as a PARTY host or PARTY guest.

Prepare for PARTY STREAMING. Connect the system to a network

(page 19). Connect equipment which is compatible

with the PARTY STREAMING function.

To use the system as the PARTY host Select a track in [Music], a radio station in [Radio], [AUDIO] or

[Bluetooth AUDIO] in [Input], press OPTIONS. Then select [Start PARTY] to start. To close, press OPTIONS, then select [Close PARTY].

If content that is not compatible with the PARTY STREAMING function is played, the system closes PARTY automatically.

To use the system as a PARTY guest Select [PARTY] in [Music], then select the PARTY host device icon. To leave the PARTY, press OPTIONS, then select [Leave PARTY]. To close the PARTY, press OPTIONS, then select [Close PARTY].

The sale and product lineup of products that are compatible with the PARTY STREAMING function differ depending on the area.

You can acquire content information using Gracenote technology and search for related information.

1 Connect the system to a network (page 19).

2 Insert a disc with content about which you want to search. You can perform a video search from a BD-ROM or DVD-ROM, and a music search from a CD-DA (music CD).

Playing the same music in different rooms (PARTY STREAMING)

PARTY guest

PARTY host (This system)

PARTY guest

Note

Note

Searching for video/ music information

32US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Right

P layb

ack

3 Press B/b to select [Video] or [Music].

4 Press V/v to select [Video Search] or [Music Search]. The content information (such as title, cast, track, or artist), [Playback History] and [Search History] are displayed. [Playback History]

Displays a list of previously played BD-ROM/DVD-ROM/CD-DA (music CD) titles. Select a title to acquire content information.

[Search History] Displays a list of previous searches performed via the [Video Search] or [Music Search] function.

To search for further related information Select an item in the lists, then select the service for searches.

TV SideView is a free mobile application for the remote device (smartphone, etc). By using the TV SideView with this system, you can easily enjoy the system by the operation on your remote device. You can launch a service or application directly from the remote device and view the disc information during the disc playback. The TV SideView also can be used as a remote control and software keyboard. Before you use the TV SideView device with this system for the first time, be sure to register the TV SideView device. Follow the on-screen instructions on the TV SideView device for registration.

The registration will be possible only when home menu appears on the TV screen.

Available Options Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation.

Common options

Using the TV SideView

Note

[Sound Mode] Changes the sound mode setting (page 22).

[Football] Turns on or off the football mode (page 23).

[Repeat Setting] Sets repeat playback.

[3D Menu] [Simulated 3D]: Adjusts the simulated 3D effect. [3D Depth Adjustment]: Adjusts the depth of 3D images. [2D Playback]: Sets playback to 2D image.

[Play/Stop] Starts or stops playback.

[Play from beginning] Plays the item from the beginning.

[Start PARTY] Starts a party with the selected source. This item may not appear depending on the source.

[Leave PARTY] Leaves a party which the system is participating in. The PARTY STREAMING function continues among other participating equipment.

[Close PARTY] For PARTY host: Closes a party. For PARTY guest: Closes a party which the system is participating in. The PARTY STREAMING function ends for all other participating equipment.

[Change Category] Switches among the [Video], [Music] and [Photo] category in BD/DVD (for disc only) or USB function. This item only available when the display list is available for the category.

33US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\050PLA.fm

masterpage: Left

[Video] only [Music] only

[Photo] only

[A/V SYNC] Adjusts the time gap between picture and sound (page 35).

[3D Output Setting] Sets whether or not to output 3D video automatically.

[Video Settings] [Picture Quality Mode]: Selects the picture

settings for different lighting environments. [BNR]: Reduces the mosaic-like block

noise in the picture. [MNR]: Reduces minor noise around the

picture outlines (mosquito noise).

[Pause] Pauses playback.

[Top Menu] Displays the BDs or DVDs Top Menu.

[Menu/Popup Menu] Displays the BD-ROMs Pop-up Menu or DVDs menu.

[Title Search] Searches for a title on BD-ROMs/DVD VIDEOs and starts playback from the beginning.

[Chapter Search] Searches for a chapter and starts playback from the beginning.

[Audio] Selects the audio format/track.

[Subtitle] Selects the subtitle language when multilingual subtitles are recorded on BD-ROMs/DVD VIDEOs.

[Angle] Switches the viewing angles when multi- angles are recorded on BD-ROMs/DVD VIDEOs.

[IP Content Noise Reduction] Adjusts the video quality for Internet content.

[Video Search] Displays information on the BD-ROM/ DVD-ROM based on Gracenote technology.

[Add Slideshow BGM] Registers music files in the USB memory as slideshow background music (BGM).

[Music Search] Displays information on the audio CD (CD-DA) based on Gracenote technology.

[Slideshow] Starts a slideshow.

[Slideshow Speed] Changes the slideshow speed.

[Slideshow Effect] Sets the effect when playing a slideshow.

[Slideshow BGM] [Off]: Turns off the function. [My Music from USB]: Sets the music files

registered in [Add Slideshow BGM]. [Play from Music CD]: Sets the tracks on

CD-DAs (music CDs).

[Change Display] Switches between [Grid View] and [List View].

[Rotate Left] Rotates the photo counterclockwise by 90 degrees.

[Rotate Right] Rotates the photo clockwise by 90 degrees.

[View Image] Displays the selected picture.

34US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

35US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\060SOU.fm

masterpage: Right

S o

u n

d A

d ju

stm en

t

(A/V SYNC)

When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound for each function separately. The setting method differs depending on the function.

When other than the BT or TV function is selected

1 Press OPTIONS. The option menu appears on the TV screen.

2 Press V/v to select [A/V SYNC], then press .

3 Press B/b to adjust the delay, then press . You can adjust from 0 ms to 300 ms in 25 ms increments.

When the TV function is selected

1 Press OPTIONS. AV.SYNC appears in the front panel display.

2 Press or b.

3 Press V/v to adjust the delay, then press . You can adjust from 0 ms to 300 ms in 25 ms increments.

4 Press OPTIONS. The option menu in the front panel display turns off.

Selecting the Audio Format, Multilingual Tracks, or Channel When the system is playing a BD/DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS) or multilingual tracks, you can change the audio format or language. With a CD, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers.

Press AUDIO repeatedly during playback to select the audio signal you want. The audio information appears on the TV screen.

x BD/DVD VIDEO Depending on the BD/DVD VIDEO, the option of language varies. When 4 digits are displayed, they represent a language code. See Language Code List (page 64). When the same language is displayed two or more times, the BD/DVD VIDEO is recorded in multiple audio formats.

x DVD-VR The types of sound tracks recorded on a disc are displayed. Example: [ Stereo] [ Stereo (Audio1)] [ Stereo (Audio2)] [ Main] [ Sub] [ Main/Sub]

Adjusting the delay between the picture and sound

Sound Adjustment

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\070TUN.fm

masterpage: Left

[ Stereo (Audio1)] and [ Stereo (Audio2)] do not appear if only one audio stream is recorded on the disc.

x CD [ Stereo]: The standard stereo sound. [ 1/L]: The sound of the left channel

(monaural). [ 2/R]: The sound of the right channel

(monaural). [ L+R]: The sound of both the left and

right channels output from each individual speaker.

Enjoying Multiplex Broadcast Sound (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives or plays a Dolby Digital multiplex broadcast signal.

To receive a Dolby Digital signal, you need to connect a TV or other equipment to the TV (DIGITAL IN OPTICAL) jack with a optical digital cord (pages 17, 18). If your TVs HDMI IN jack is compatible with the Audio Return Channel function (pages 17, 48), you can receive a Dolby Digital signal via an HDMI cable.

Press AUDIO repeatedly until the signal you want appears in the front panel display. MAIN: Sound of the main language

will be output. SUB: Sound of the sub language will

be output. MN/SUB: Mixed sound of both the

main and sub languages will be output.

Listening to the Radio 1 Press FUNCTION repeatedly

until FM appears in the front panel display.

2 Select the radio station.

Automatic tuning Hold down TUNING +/ until the auto scanning starts. [Auto Tuning] appears on the TV screen. Scanning stops when the system tunes in a station. To cancel automatic tuning, press any buttons.

Manual tuning Press TUNING +/ repeatedly.

3 Press VOL +/ repeatedly to adjust the volume.

If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.

1 Press OPTIONS. The option menu appears on the TV screen.

2 Press V/v to select [FM Mode], then press .

3 Press V/v to select [Monaural], then press . [Stereo]: Stereo reception. [Monaural]: Monaural reception.

You can set [FM Mode] for each preset station separately.

Note

Note

Tuner

Tip

36US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\070TUN.fm

masterpage: Right

T u

n er

To turn off the radio Press "/1.

You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum.

1 Press FUNCTION repeatedly until FM appears in the front panel display.

2 Hold down TUNING +/ until the auto scanning starts. Scanning stops when the system tunes in a station.

3 Press OPTIONS. The option menu appears on the TV screen.

4 Press V/v to select [Preset Memory], then press .

5 Press V/v to select the preset number you want, then press .

6 Repeat Steps 2 to 5 to store other stations.

To change a preset number Select the preset number you want by pressing PRESET +/, then perform the procedure from Step 3.

1 Press FUNCTION repeatedly until FM appears in the front panel display. The last received station is tuned in.

2 Press PRESET +/ repeatedly to select the preset station. The preset number and frequency appear on the TV screen and front panel display. Each time you press the button, the system tunes in one preset station.

You can select the preset station number directly by pressing the number buttons.

Each time you press DISPLAY, the display in the front panel display changes cyclically as follows: Frequency t Preset number t Decoding status* * Appears when [Sound Effect] is set to

[Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] (page 46).

Presetting radio stations

Selecting a preset station

Tip

37US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\080OTH.fm

masterpage: Left

Using the Control for HDMI Function for BRAVIA Sync This function is available on TVs with the BRAVIA Sync function. By connecting Sony equipment that is compatible with the Control for HDMI function via an HDMI cable, operation is simplified.

To use the BRAVIA Sync function, be sure to turn on the system and all connected equipment after completed the HDMI connection.

Control for HDMI - Easy Setting You can set the systems [Control for HDMI] function automatically by enabling the corresponding setting on the TV. For details about the Control for HDMI function, see [HDMI Settings] (page 48)

System Power Off You can turn the system off in sync with the TV.

The system does not turn off automatically while playing music or when FM function is selected.

One-Touch Play When you press N on the remote control, the system and TV turn on, and the TVs input is switched to the HDMI input which the system is connected.

System Audio Control You can enjoy the sound from TV or other equipment by a simple operation.

You can use the System Audio Control function as follows: When the system is turned on, the sound

of the TV or other equipment can be output from the speakers of the system.

When sound from the TV or other equipment is output via the speakers of the system, you can switch the sound to output from the TV speakers by pressing SPEAKERS TVyAUDIO.

When sound from the TV or other equipment is output via the speakers of the system, you can adjust the volume and turn off the sound of the system by operating the TV.

Audio Return Channel You can enjoy TV sound via the system by using just one HDMI cable. For details of the setting, see [Audio Return Channel] (page 48).

Language Follow When you change the language for the on-screen display of the TV, the systems on-screen display language is also changed after turning off and on the system.

Setting the Speakers [Speaker Settings] To obtain optimum surround sound, set the speakers distance from your listening position. Then use the test tone to adjust the balance of the speakers.

1 Press HOME. The home menu appears on the TV screen.

Other Operations

Note

Note

38US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\080OTH.fm

masterpage: Right

O th

er O p

eratio n

s

2 Press B/b to select [Setup].

3 Press V/v to select [Audio Settings], then press .

4 Press V/v to select [Speaker Settings], then press . The [Select speaker layout.] display appears.

5 Press V/v to select setting according to your speakers placement, then press . [Standard]: The surround speakers

are installed in the rear position. [All Front]: All speakers are installed

in the front position.

The [Distance] and [Level] settings are reset to default settings each time you change the speaker layout setting.

6 Press V/v to select the item, then press .

7 Press V/v to adjust the parameter.

8 Press B/b and to confirm the settings. Check the following settings.

x [Distance] Be sure to set the parameters of the distance from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0.0 to 7.0 meters).

[Front Left/Right] 10 ft/3.0 m: Set the front speaker distance. [Center] 10 ft/3.0 m: Set the center speaker distance. [Surround Left/Right] 10 ft/3.0 m: Set the surround speaker distance. [Subwoofer] 10 ft/3.0 m: Set the subwoofer distance.

You can change the unit of measurement (feet or meters) by pressing the color button (RED).

x [Level] You can adjust the sound level of the speakers. You can set the parameters from 6.0 dB to +6.0 dB. Be sure to set [Test Tone] to [On] for easy adjustment.

[Front Left/Right] 0.0 dB: Set the front speaker level. [Center] 0.0 dB: Set the center speaker level. [Surround Left/Right] 0.0 dB: Set the surround speaker level. [Subwoofer] 0.0 dB: Set the subwoofer level.

x [Test Tone] The speakers will emit a test tone to adjust [Level].

[Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows.

1 Set [Test Tone] to [On].

2 Press V/v to select [Level], then press .

3 Press V/v to select the speaker type you want, then press .

4 Press B/b to select the left or right speaker, then press V/v to adjust the level.

5 Press .

6 Repeat Steps 3 to 5.

Note

Tip

39US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\080OTH.fm

masterpage: Left

7 Press RETURN. The system returns to the previous display.

8 Press V/v to select [Test Tone], then press .

9 Press V/v to select [Off], then press .

The test tone signals are not output from the HDMI (OUT) jack.

To adjust the volume of all the speakers at one time, press VOL +/.

Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes.

Press SLEEP. Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes.

When you set the sleep timer, the remaining time appears every 5 minutes. When the remaining time is less than 2 minutes, SLEEP flashes in the front panel display.

To check the remaining time Press SLEEP once.

To change the remaining time Press SLEEP repeatedly.

Deactivating the Buttons on the Unit (Child Lock) You can deactivate the buttons on the unit (except for "/1) for preventing misoperation, such as child mischief.

Hold down x on the unit for more than 5 seconds. LOCKED appears in the front panel display. The child lock function is activated and the buttons on the unit are locked. (You can operate the system by using the remote control.) To cancel, hold down x for more than 5 seconds until UNLOCK appears in the front panel display.

If you operate the buttons on the unit while the child lock function is on, LOCKED flashes in the front panel display.

Controlling Your TV with the Supplied Remote Control By adjusting the remote control signal, you can control your TV with the supplied remote control.

When you replace the batteries of the remote control, the code number may reset to the default (SONY) setting. Set the appropriate code number again.

Note

Tip

Note

Note

40US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\080OTH.fm

masterpage: Right

O th

er O p

eratio n

s

While holding down TV "/1, press number buttons to enter your TVs manufacturers code (see the table). Then release TV "/1.

If the setting is unsuccessful, the currently registered code is not changed. Re-enter the code number. If more than one code number is listed, try entering them one at a time until you find the code that works with your TV.

Saving Power in Standby Mode Check that you have made the following settings: [Control for HDMI] in [HDMI Settings]

is set to [Off] (page 48). [Quick Start Mode] is set to [Off]

(page 48). [Remote Start] in [Network Settings] is

set to [Off] (page 49).

Browsing Websites 1 Prepare for Internet browsing.

Connect the system to a network (page 19).

2 Press HOME. The home menu appears on the TV screen.

3 Press B/b to select [Network].

4 Press V/v to select [Internet Browser], then press . The [Internet Browser] display appears.

Some websites may not display correctly, or not function.

To enter a URL Select [URL entry] from the options menu. Enter the URL using the software keyboard, then select [Enter].

To set the default start page While the page you want to set is displayed, select [Set as start page] from the options menu.

To return to the previous page Select [Previous page] from the options menu. When the previous page does not appear even if you select [Previous page], select [Window List] from the options menu and select the page you want to return to from the list.

To quit Internet Browser Press HOME.

Preparing the remote control for controlling the TV

Manufacturer Code number

SONY 01 (default)

LG 02

PANASONIC 05

SAMSUNG 02, 06

SHARP 03

TOSHIBA 04

VIZIO 07 Note

41US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\080OTH.fm

masterpage: Left

You can check website information by pressing DISPLAY. The display information differs depending on the website and page status.

A Page title

B Page address

C Cursor Move by pressing B/V/v/b. Place the cursor on the link you want to view, then press . The linked website is displayed.

D SSL icon Appears when the linked URL is secured.

E Signal strength indicator Appears when the system is connected to a wireless network.

F Progress bar/Loading icon Appears when the page is being read, or during file download/transfer.

G Text input field Press , then choose [Input] from the options menu to open the software keyboard.

H Scroll bar Press B/V/v/b to move the page display left, up, down, or right.

Various settings and operations are available by pressing OPTIONS. The available items differ depending on the situation.

Internet Browser display

Available options

[Browser Setup] Displays the Internet Browser settings. [Zoom]: Increases or decreases the size of

the displayed contents. [JavaScript Setup]: Sets whether to enable

or disable JavaScript. [Cookie Setup]: Sets whether or not to

accept browser cookies. [SSL Alarm Display]: Sets whether to

enable or disable SSL.

[Window List] Displays a list of all current opened websites. Allows you to return to a previous displayed website by selecting the window.

[Bookmark List] Displays the bookmark list.

[URL entry] Allows you to enter a URL when the software keyboard is displayed.

[Previous page] Moves to a previous displayed page.

[Next page] Moves to the previous displayed next page.

[Cancel loading] Stops loading a page.

[Reload] Reloads the same page.

[Add to Bookmark] Adds the current displayed website to the bookmark list.

[Set as start page] Sets the current displayed website as the default start page.

[Open in new window] Opens a link in a new window.

[Character encoding] Sets the character encoding system.

42US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Right

S ettin

g s an

d A

d ju

stm en

ts

Using the Setup Display You can make various adjustments to items such as picture and sound. The default settings are underlined.

Playback settings stored in the disc take priority over the Setup Display settings. Therefore, some of the functions may not be performed.

1 Press HOME.

The home menu appears on the TV screen.

2 Press B/b to select [Setup].

3 Press V/v to select the setup category icon, then press .

[Display certificate] Displays server certificates sent from pages that support SSL.

[Input] Displays the software keyboard to enter characters while browsing a website.

[Break] Moves the cursor to the next line in the text input field.

[Delete] Erases one character on the left side of the cursor during text input.

Settings and Adjustments

Note

Icon Explanation

[Network Update] (page 44) Updates the software of the system.

[Screen Settings] (page 44) Makes the screen settings according to the type of TV.

[Audio Settings] (page 46) Makes the audio settings according to the type of connecting jacks.

[BD/DVD Viewing Settings] (page 47) Makes detailed settings for BD/DVD playback.

43US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Left

[Network Update] By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, refer to the following website: http://www.sony.com/blurayhtsupport/

During a software update, UPDATE appears in the front panel display. After the update completes, the unit automatically turns off. While the updating operation is in progress, do not turn on or off the unit, or operate the unit or TV. Wait for the software update to complete.

[Screen Settings]

x [3D Output Setting] [Auto]: Normally select this. [Off]: Select this to display all contents in 2D.

x [TV Screen Size Setting for 3D] Sets the screen size of your 3D-compatible TV.

x [TV Type] [16:9]: Select this when connecting to a wide-screen TV or a TV with a wide-mode function. [4:3]: Select this when connecting to a 4:3 screen TV without a wide-mode function.

x [Screen Format] [Full]: Select this when connecting to a TV with a wide-mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV. [Normal]: Changes the picture size to fit the screen size with the original picture aspect ratio.

[Parental Control Settings] (page 47) Makes detailed settings for the Parental Control function.

[System Settings] (page 48) Makes the system-related settings.

[Network Settings] (page 49) Makes detailed settings for Internet and network.

[Easy Network Settings] (page 50) Runs [Easy Network Settings] to make the basic network settings.

[Resetting] (page 50) Resets the system to the factory settings.

Icon Explanation

44US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Right

S ettin

g s an

d A

d ju

stm en

ts

x [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom.

[Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides.

x [Cinema Conversion Mode] [Auto]: Normally select this. The unit automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method. [Video]: The conversion method suited for video-based material will always be selected regardless of the material.

x [Output Video Resolution] [Auto]: Outputs video signal according to the resolution of the TV or connected equipment. [Original Resolution]: Outputs video signal according to the resolution recorded on the disc. (When the resolution is lower than SD resolution, it is scaled up to SD resolution.) [480i/576i]*, [480p/576p]*, [720p], [1080i], [1080p]: Outputs video signal according to the selected resolution setting.

* If the color system of your disc is NTSC, the video signals resolution can be converted to [480i] and [480p] only.

x [BD-ROM 24p Output] [Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible TV via an HDMI connection and the [Output Video Resolution] is set to [Auto] or [1080p]. [On]: Select this when your TV is compatible with 1080/24p video signals. [Off]: Select this when your TV is not compatible with 1080/24p video signals.

x [DVD-ROM 24p Output] [Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible TV via an HDMI connection and the [Output Video Resolution] is set to [Auto] or [1080p]. [Off]: Select this when your TV is not compatible with 1080/24p video signals.

x [YCbCr/RGB (HDMI)] [Auto]: Automatically detects the type of external equipment, and switches to the matching color setting. [YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals. [YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals. [RGB]: Select this when connecting to an equipment with an HDCP compliant DVI jack.

x [HDMI Deep Color Output] [Auto]: Normally select this. [16bit], [12bit], [10bit]: Outputs 16bit/ 12bit/10bit video signals when the connected TV is compatible with Deep Color. [Off]: Select this when the picture is unstable or colors appear unnatural.

45US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Left

x [Pause Mode] (BD/DVD VIDEO/ DVD-R/DVD-RW only) [Auto]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [Frame]: The picture, including subjects that do not move dynamically, is output in high resolution.

[Audio Settings]

x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only.

x [Audio DRC] You can compress the dynamic range of the sound track.

[Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [Off]: No compression of dynamic range.

x [Attenuate - AUDIO] Distortion may occur when you listen to an equipment connected to the AUDIO IN (L/R) jacks. You can prevent distortion by attenuating the input level on the unit.

[On]: Attenuates the input level. The output level will decrease at this setting. [Off]: Normal input level.

x [Audio Output] You can select the output method where the audio signal is output.

[Speaker]: Outputs multi-channel sound from the systems speakers only. [Speaker + HDMI]: Outputs multi-channel sound from the systems speakers and 2-channel linear PCM signals from the HDMI (OUT) jack. [HDMI]: Outputs sound from the HDMI (OUT) jack only. Sound format depends on the connected equipment.

When [Control for HDMI] is set to [On] (page 48), [Audio Output] is set to [Speaker + HDMI] automatically and this setting cannot be changed.

When [Audio Output] is set to [HDMI], the output signal format for the TV function is 2-channel linear PCM.

x [Sound Effect] You can turn on or off the systems sound effects (SOUND MODE setting (page 22)). For a 2-channel source, you can select [Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] to simulate surround sound.

[Sound Mode On]: Enables the surround effect of the sound mode (page 22) and Football mode (page 23). [Dolby Pro Logic]: The system simulates surround sound from 2-channel sources and outputs sound from all speakers (5.1 channel) (Dolby Pro Logic decoding). [DTS Neo:6 Cinema]/[DTS Neo:6 Music]: The system simulates surround sound from 2-channel sources and produces multi- channel sound (DTS Neo:6 Cinema/DTS Neo:6 Music mode decoding). [2ch Stereo]: This system outputs the sound from the front left/right speakers and subwoofer only. Multi-channel surround formats are downmixed to 2-channel.

Note

46US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Right

S ettin

g s an

d A

d ju

stm en

ts

[Off]: The sound effects are disabled. You can hear sound as it is recorded.

x [Speaker Settings] To obtain optimum surround sound, set the speakers. For details, see Setting the Speakers (page 38).

x [Bluetooth AUDIO - AAC] You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device supports AAC. [Off]: SBC audio.

You can enjoy high quality sound if the AAC is enabled. In case you cannot listen to AAC sound from your device, select [Off].

[BD/DVD Viewing Settings]

x [BD/DVD Menu Language] You can select the default menu language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 64).

x [Audio Language] You can select the default track language for BD-ROMs or DVD VIDEOs. When you select [Original], the language given priority in the disc is selected. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 64).

x [Subtitle Language] You can select the default subtitle language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 64).

x [BD Hybrid Disc Playback Layer] [BD]: Plays BD layer. [DVD/CD]: Plays DVD or CD layer.

x [BD Internet Connection] [Allow]: Normally select this. [Do not allow]: Prohibits Internet connection.

[Parental Control Settings]

x [Password] Set or change the password for the Parental Control function. A password allows you to set a restriction on BD-ROM, DVD VIDEO, or Internet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs and DVD VIDEOs.

x [Parental Control Area Code] Playback of some BD-ROMs or DVD VIDEOs can be limited according to the geographic area. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four- digit password.

Note

47US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Left

x [BD Parental Control]/[DVD Parental Control]/[Internet Video Parental Control] By setting Parental Control, scenes can be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.

x [Internet Video Unrated] [Allow]: Allows the playback of unrated Internet videos. [Block]: Blocks the playback of unrated Internet videos.

[System Settings]

x [OSD Language] You can select the language you want for the system on-screen display.

x [Main Unit illumination] [On]: The front panel display is always turned on and the brightness of the LED indicator is the maximum. [Auto]: The front panel display is turned off and the brightness of LED indicator is reduced automatically if you do not operate the system for about 10 seconds.

x [HDMI Settings] [Control for HDMI] [On]: Turns on the [Control for HDMI] function. You can operate mutually between equipment that are connected with an HDMI cable. [Off]: Off.

[Audio Return Channel] This function is available when you connect the system to a TVs HDMI IN jack that is compatible with the Audio Return Channel function and [Control for HDMI] is set to [On]. [Auto]: The system can receive the digital audio signal of the TV automatically via an HDMI cable. [Off]: Off.

x [Quick Start Mode] [On]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on. [Off]: The default setting.

x [Auto Display] [On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. [Off]: Displays information only when you pressDISPLAY.

x [Screen Saver] [On]: Turns on the screen saver function. [Off]: Off.

x [Software Update Notification] [On]: Sets the system to inform you of latest software version information (page 44). [Off]: Off.

x [Gracenote Settings] [Auto]: Automatically downloads disc information when you stop playback of the disc. To download, the system must be connected to the network. [Manual]: Downloads disc information when [Video Search] or [Music Search] is selected.

48US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\090SET.fm

masterpage: Right

S ettin

g s an

d A

d ju

stm en

ts

x [System Information] You can display the systems software version information and the MAC address.

x [Software License Information] You can display the Software License Information.

[Network Settings]

x [Internet Settings] Connect the system to the network beforehand. For details, see Step 3: Preparing for Network Connection (page 19).

[Wired Setup]: Select this when you connect to a broadband router using a LAN cable. [Wireless Setup(built-in)]: Select this when you use the built-in wireless LAN of the system for wireless network connection.

For further details, visit the following website and check the FAQ: http://www.sony.com/blurayhtsupport/

x [Network Connection Status] Displays the current network connection status.

x [Network Connection Diagnostics] You can run the network diagnostic to check if the network connection has been made properly.

x [Connection Server Settings] Sets whether or not to display the connected DLNA server.

x [Renderer Options] [Auto Access Permission]: Sets whether or not to allow automatic access from a newly detected DLNA controller. [Smart Select]: Allows a Sony DLNA controller to find the system as the target equipment to operate by using the infrared ray. You can set this function to on or off. [Renderer Name]: Displays the systems name as it is listed on other DLNA devices on the network.

x [Renderer Access Control] Sets whether or not to accept commands from DLNA controllers.

x [PARTY Auto Start] [On]: Starts a PARTY or joins an existing PARTY at the request of a networked device compatible with the PARTY STREAMING function. [Off]: Off.

x [Registered Remote Devices] Displays a list of your registered remote devices.

To use this function, be sure to perform the software update (page 44).

x [Remote Start] [On]: Allows turn on the system by a device linked via network when the system is in standby mode. [Off]: The system cannot be turned on by a device linked via network.

Tip

Note

49US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

[Easy Network Settings] Runs [Easy Network Settings] to make the basic network settings. Follow the on- screen instructions.

[Resetting]

x [Reset to Factory Default Settings] You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.

x [Initialize Personal Information] You can erase your personal information stored in the system.

Precautions On safety Should any solid object or liquid fall into

the cabinet, unplug the system and have it checked by qualified personnel before operating it any further.

Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.

On power sources If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

For the model supplied with the AC plug adaptor If the supplied adaptor on the AC plug does not fit your wall outlet, detach it from the AC plug.

On placement Place the system in a location with

adequate ventilation to prevent heat build-up in the system.

Although the unit heats up during operation, this is not a malfunction. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.

Additional Information

50US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

Do not place the unit on a soft surface (rugs, blankets, etc.) that might block the ventilation holes.

Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.

Do not install the system in an inclined position. It is designed to be operated in a horizontal position only.

Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers.

Do not place heavy objects on the system. Do not place metal objects in front of the

front panel. It may limit reception of radio waves.

Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment.

If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function.

On operation If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.

On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is suddenly played.

On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

On replacement of parts In the events that this system is repaired, repaired parts may be retained for reuse or recycling purposes.

On your TVs color If the speakers cause the color irregularity on your TV screen, turn off the TV then turn it on after 15 to 30 minutes. If color irregularity persist, place the speakers further away from the TV set.

On moving the system Before moving the system, make sure that there is no disc inserted, and disconnect the AC power cord (mains lead) from the wall outlet (mains).

IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your TV screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen. Plasma display panel televisions and projection televisions are especially susceptible to this.

51US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

On Bluetooth communication Bluetooth devices should be used within

approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. When a person, metal object, wall or

other obstruction is between the devices with a Bluetooth connection

Locations where a wireless LAN is installed

Around microwave ovens that are in use

Locations where other electromagnetic waves occur

Bluetooth devices and wireless LAN (IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: Use this unit at least 10 meters (33 feet)

away from the wireless LAN device. Turn off the power to the wireless LAN

equipment when using your Bluetooth device within 10 meters (33 feet).

Install this unit and Bluetooth device as closer to each other as possible.

The radio waves broadcast by this unit may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this unit and Bluetooth device in the following locations: In hospitals, on trains, in airplanes, at

gas stations, and any place where flammable gasses may be present

Near automatic doors or fire alarms

This unit supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.

Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology.

Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this unit.

Bluetooth devices connected with this unit must comply with the Bluetooth specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the Bluetooth device make it impossible to connect, or may result in different control methods, display or operation.

Noise may occur or the audio may cut off depending on the Bluetooth device connected with this unit, the communications environment, or surrounding conditions.

If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

52US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

Notes about Discs On handling discs To keep the disc clean, handle the disc by

its edge. Do not touch the surface. Do not stick paper or tape on the disc.

Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

After playing, store the disc in its case.

On cleaning Before playing, clean the disc with a

cleaning cloth. Wipe the disc from the center out.

Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.

This system can only play a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction.

Do not use a disc that has a commercially available accessory attached, such as a label or ring.

Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

The power does not turn on. t Check that the AC power cord (mains

lead) is connected securely.

The remote control does not function. t The distance between the remote

control and the unit is too far. t The batteries in the remote control are

weak.

The disc tray does not open and you cannot remove the disc even after you press Z. t Try the following: 1 Hold down N and Z on the unit

for more than 5 seconds to open the disc tray.

2 Remove the disc. 3 Disconnect the AC power cord

(mains lead) from the wall outlet (mains), then reconnect after several minutes.

The system does not work normally. t Disconnect the AC power cord (mains

lead) from the wall outlet (mains), then reconnect after several minutes.

General

53US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

[A new software version is available. Please go to the Setup section of the menu and select Network Update to perform the update.] appears on the TV screen. t See [Network Update] (page 44) to

update the system to a latest software version.

PRTECT, PUSH and POWER appear alternately in the front panel display. t Press "/1 to turn off the system, and

check the following items after STBY disappears. Are you using only the supplied

speakers? Is anything blocking the ventilation

holes of the system? After checking the above items and

fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

LOCKED appears in the front panel display. t Set the child lock function to off

(page 40).

D. LOCK appears in the front panel display. t Contact your nearest Sony dealer or

local authorized Sony service facility.

Exxxx (x is a number) appears in the front panel display. t Contact your nearest Sony dealer or

local authorized Sony service facility and give the error code.

appears without any messages on the entire TV screen. t Contact your nearest Sony dealer or

local authorized Sony service facility.

There is no picture or the picture is not output correctly. t Check the output method on your

system (page 17). t Hold down N and VOL on the unit

for more than 5 seconds to reset the video output resolution to the lowest resolution.

t For BD-ROMs, check the [BD-ROM 24p Output] settings in [Screen Settings] (page 45).

There is no picture when you make an HDMI cable connection. t The unit is connected to an input

device that is not HDCP (High- bandwidth Digital Content Protection) compliant (HDMI in the front panel does not light up) (page 17).

The dark area of the picture is too dark/the bright area is too bright or unnatural. t Set [Picture Quality Mode] to

[Standard] (default) (page 34).

Picture noise appears. t Clean the disc. t If the picture output from your system

goes through your equipment to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to the other input jacks.

Messages

Picture

54US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

An image is not displayed on the entire TV screen. t Check the setting of [TV Type] in

[Screen Settings] (page 44). t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen. t If the speakers are used with a CRT-

based TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set.

t If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes.

t Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers.

There is no sound. t The speaker cords are not connected

securely. t Check the speaker settings (page 38).

There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function. t Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to [On] (page 48). Also, set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Auto] (page 48).

t Make sure that your TV is compatible with the Audio Return Channel function.

t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function.

The system does not output sound of TV programs correctly when connected to a set-top box. t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off] (page 48).

t Check the connections (page 18).

Severe hum or noise is heard. t Move your audio equipment away

from the TV. t Clean the disc.

The sound loses stereo effect when you play a CD. t Select stereo sound by pressing

AUDIO (page 35).

The sound outputs from the center speaker only. t Depending on the disc, the sound may

output from the center speaker only.

No sound or only a very low-level sound is heard from the surround speakers. t Check the speaker connections and

settings (pages 16, 38). t Check the sound mode setting

(page 22). t Depending on the source, the effect of

the surround speakers may be less noticeable.

t A 2-channel source is being played.

Distortion occurs in the sound of a connected equipment. t Reduce the input level for the

connected equipment by setting [Attenuate - AUDIO] (page 46).

A sudden loud music is heard. t The build-in sound demonstration is

activated. Press VOL to reduce the volume or press x to stop the demonstration.

Sound

55US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

Radio stations cannot be tuned in. t Check that the antenna (aerial) is

connected securely. Adjust the antenna (aerial).

t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.

The disc does not play. t The region code on the BD/DVD does

not match the system. t Moisture has condensed inside the unit

and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour.

t The system cannot play a recorded disc that is not correctly finalized (page 58).

File names are not displayed correctly. t The system can only display ISO

8859-1 compliant character formats. Other character formats may be displayed differently.

t Depending on the writing software used, the input characters may be displayed differently.

A disc does not start playing from the beginning. t Resume play has been selected. Press

OPTIONS and select [Play from beginning], then press .

Playback does not start from the resume point where you last stopped playing. t The resume point may be cleared from

memory depending on the disc when you open the disc tray. you disconnect the USB device. you play other content. you turn off the unit.

The language for the soundtrack/ subtitle or angles cannot be changed. t Try using the BDs or DVDs menu. t Multi-lingual tracks/subtitles or multi-

angles are not recorded on the BD or DVD being played.

Bonus contents or other data that are contained in a BD-ROM cannot be played. t Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and reconnect the USB

device (page 26). 4 Turn the system on. 5 Insert the BD-ROM with

BONUSVIEW/BD-LIVE.

The USB device is not recognized. t Try the following: 1 Turn the system off. 2 Remove and reconnect the USB

device. 3 Turn the system on.

t Make sure that the USB device is securely connected to the (USB) port.

t Check if the USB device or a cable is damaged.

t Check if the USB device is on.

Tuner

Playback

USB device

56US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

t If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the unit.

The picture/sound is poor/certain programs display with a loss of detail, especially during fast-motion or dark scenes. t Picture/sound quality may be poor

depending on Internet content providers.

t Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standard- definition video and 10 Mbps for high- definition video.

t Not all videos contain sound.

The picture is small. t Press V to zoom in.

The [Control for HDMI] function does not work (BRAVIA Sync). t Check that [Control for HDMI] is set

to [On] (page 48). t If you change the HDMI connection,

turn the system off and on again. t If power failure occurs, set [Control

for HDMI] to [Off], then set [Control for HDMI] to [On] (page 48).

t Check the following and refer to the operating instructions supplied with the equipment. The connected equipment is

compatible with the [Control for HDMI] function.

The connected equipments setting for the [Control for HDMI] function is correct.

The system cannot connect to the network. t Check the network connection

(page 19) and the network settings (page 49).

You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. t The wireless settings of the router may

change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly.

The system cannot connect to the network or the network connection is unstable. t Check if the wireless LAN router is on. t Check the network connection

(page 19) and the network settings (page 49).

t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other.

BRAVIA Internet Video

BRAVIA Sync ([Control for HDMI])

Network connection

Wireless LAN connection

57US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

t Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt communication. Move the unit away from such devices, or turn off such devices.

t The wireless LAN connection may be unstable depending on the usage environment, especially while using the Bluetooth function of the system. In this case, adjust the usage environment.

The wireless router you want is not shown in the wireless network list. t Press RETURN to return to the

previous screen, and try [Wireless Setup(built-in)] again. If the wireless router you want is still not detected, select [Add a new address.] from the network list, then select [Manual Registration] to input a network name (SSID) manually.

Pairing cannot be done. t Move the Bluetooth device closer to

the unit. t Pairing may not be possible if other

Bluetooth devices are present around the unit. In this case, turn off the other Bluetooth devices.

t Delete the system from your Bluetooth device and perform pairing again (page 27).

Connecting cannot be done. t The pairing registration information

has been erased. Perform the pairing operation again (page 27).

There is no sound. t Make sure this system is not too far

from the Bluetooth device, or this system is not receiving interference from a Wi-Fi network, other 2.4 GHz wireless device, or microwave oven.

t Check that the Bluetooth connection is made properly between this system and the Bluetooth device.

t Pair this system and the Bluetooth device again.

t Keep the system away from metal objects or surfaces.

t Make sure BT function is selected. t Adjust the volume of the Bluetooth

device first, if the volume level is still too low, adjust the volume level on the unit.

The sound skips or fluctuates, or the connection is lost. t The unit and the Bluetooth device are

too far apart. t If there are obstacles between the unit

and your Bluetooth device, remove or avoid the obstacles.

t If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.

Playable Discs

Bluetooth device

Blu-ray Disc BD-ROM1)

BD-R/BD-RE2)

DVD3) DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW

CD3) CD-DA (Music CD) CD-ROM CD-R/CD-RW

58US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

1) Since Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings.

2) BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type) BD-Rs recorded on a PC cannot be played if postscripts are recordable.

3) A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.

Discs that cannot be played BDs with cartridge BDXLs DVD-RAMs HD DVDs DVD Audio discs PHOTO CDs Data part of CD-Extras Super VCDs Audio material side on DualDiscs A disc recorded in a color system other

than NTSC, such as PAL (This system conforms to the NTSC color system.)

Notes on discs This product is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this product.

Note on playback operations of a BD/DVD Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a BD/DVD according to the disc contents the software producers designed, some playback features may not be available.

Note on double-layer BDs/DVDs The playback picture and sound may be momentarily interrupted when the layers switch.

Region code (BD-ROM/DVD VIDEO only) Your system has a region code printed on the bottom of the unit and will only play a BD-ROM/DVD VIDEO (playback only) labeled with identical region codes or .

Playable Types of Files Video

Video Codec Container Extension

MPEG-1 Video*1 PS .mpg, .mpeg

MPEG-2 Video*2 PS*3 .mpg, .mpeg

TS*4 .m2ts, .mts

Xvid AVI .avi

MKV .mkv

MPEG4/AVC*5 MKV*1 .mkv

MP4*1 .mp4, .m4v

TS*1 .m2ts, .mts

Quick Time*6

.mov

3gpp/ 3gpp2*6

.3gp, .3g2,

.3gpp, .3gp2

VC1*1 TS .m2ts, .mts

WMV9*1 ASF .wmv, .asf

Motion JPEG*6 Quick Time

.mov

AVI .avi

Video Format Container Extension

AVCHD*1*7 AVCHD Format Folder*8

ALL

59US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

Music

Photo

*1 The system may not play this file format on a DLNA server.

*2 The system can only play standard definition video on a DLNA server.

*3 The system does not play DTS format files on a DLNA server.

*4 The system can only play Dolby Digital format files on a DLNA server.

*5 The system can support AVC up to Level 4.1. *6 The system does not play this file format on a

DLNA server. *7 The system can play AVCHD Ver.2.0 format

(AVCHD 3D/Progressive). *8 The system plays AVCHD format files that are

recorded on a digital video camera, etc. The AVCHD format disc will not play if it has not been correctly finalized.

*9 The system does not play animated PNG or animated GIF files.

*10For MPO files other than 3D, the key image or the first image is displayed.

Some files may not play depending on the file format, the file encoding, the recording condition, or DLNA server condition.

Some files edited on a PC may not play. Some files may not be able to perform fast

forward or fast reverse function. The system does not play coded files such as

DRM and Lossless. The system can recognize the following files or

folders in BDs, DVDs, CDs and USB devices: up to folders in the 9th layer (including the

root folder) up to 500 files/folders in a single layer

The system can recognize the following files or folders stored in the DLNA server: up to folders in the 19th layer up to 999 files/folders in a single layer

The system can support frame rate: up to 60 fps for AVCHD only. up to 30 fps for other video codecs.

The system can support video bit rate up to 40 Mbps.

The system can support video resolution up to 1920 1080p.

Some USB devices may not work with this system.

The system can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD), Still Image Capture Devices (SICDs), and 101-key keyboards.

The system may not play high bit rate video files from a DATA CD smoothly. It is recommended to play high bit rate video files using a DATA DVD or DATA BD.

Audio Codec Extension

MP3 (MPEG-1 Audio Layer III)

.mp3, .mka*6

AAC*1 .m4a, .aac*6, .mka*6

WMA9 Standard*1 .wma

LPCM .wav, .mka*6

FLAC*6 .flac, .fla

AC3*6 .ac3, .mka

Photo Format Extension

JPEG .jpeg, .jpg, .jpe

PNG .png*9

GIF .gif*9

MPO .mpo*6*10

Note

60US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

Supported Audio Formats Audio formats supported by this system are as follows.

a: Supported format. : Unsupported format. * Decoded as DTS core.

For LPCM 2ch format, the supported sampling frequency of the digital signal is up to 48 kHz when using the TV function.

Specifications Amplifier Section POWER OUTPUT (rated) Front L/Front R:

75 W + 75 W (at 3 ohms, 1 kHz, 1% THD)

POWER OUTPUT (reference) Front L/Front R/Surround L/Surround R:

125 W (per channel at 3 ohms, 1 kHz) Center:

250 W (at 6 ohms, 1 kHz) Subwoofer:

250 W (at 6 ohms, 80 Hz)

Inputs (Analog) AUDIO IN

Sensitivity: 1 V/400 mV Inputs (Digital) TV (Audio Return Channel/OPTICAL)

Supported formats: LPCM 2CH (up to 48 kHz), Dolby Digital, DTS

HDMI Section Connector

Type A (19pin)

BD/DVD/CD System Signal format system

NTSC

USB Section (USB) port:

Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera)

LAN Section LAN (100) terminal

100BASE-TX Terminal

Wireless LAN Section Standards Compliance

IEEE 802.11 b/g/n Frequency and Channel

2.4 GHz band: channels 113

Format Function

BD/DVD TV (DIGITAL IN)

LPCM 2ch a a

LPCM 5.1ch, LPCM 7.1ch

a

Dolby Digital a a

Dolby TrueHD, Dolby Digital Plus

a

DTS a a

DTS-ES Discrete 6.1, DTS-ES Matrix 6.1

a* a*

DTS96/24 a a*

DTS-HD High Resolution Audio

a

DTS-HD Master Audio

a

Note

61US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

Bluetooth Section Communication system

Bluetooth Specification version 3.0 Output

Bluetooth Specification Power Class 2 Maximum communication range

Line of sight approx. 10 m (33 ft)1)

Frequency band 2.4 GHz band

Modulation method FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles2)

A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs3)

SBC4), AAC Transmission range (A2DP)

20 Hz 20,000 Hz (Sampling frequency 44.1 kHz, 48 kHz)

1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antennas performance, operating system, software application, etc.

2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.

3) Codec: Audio signal compression and conversion format

4) Subband Codec

FM Tuner Section System

PLL quartz-locked digital synthesizer Tuning range

87.5 MHz 108.0 MHz (100 kHz step) Antenna (aerial)

FM wire antenna (aerial)

Speakers

Front/Surround (SS-TSB123) for BDV-E6100

Front (SS-TSB123) for BDV-E4100 Dimensions (w/h/d) (approx.)

100 mm 650 mm 100 mm (4 in 25 5/8 in 4 in) (wall-mounted part) 260 mm 1,200 mm 260 mm (10 1/4 in 47 1/4 in 10 1/4 in) (whole speaker)

Mass (approx.) Front: 1.3 kg (2 lb 14 oz) (wall-mounted

part with speaker cord) 2.9 kg (6 lb 7 oz) (whole speaker)

Surround: 1.4 kg (3 lb 2 oz) (wall-mounted part with speaker cord) 3.0 kg (6 lb 10 oz) (whole speaker)

Front/Surround (SS-TSB122) for BDV-E3100

Surround (SS-TSB122) for BDV-E4100 Dimensions (w/h/d) (approx.)

90 mm 205 mm 91 mm (3 5/8 in 8 1/8 in 3 5/8 in)

Mass (approx.) Front: 0.53 kg (1 lb 3 oz) (with speaker cord) Surround: 0.62 kg (1 lb 6 oz) (with speaker cord)

Front/Surround (SS-TSB121) for BDV-E2100 Dimensions (w/h/d) (approx.)

95 mm 189 mm 80 mm (3 3/4 in 7 1/2 in 3 1/4 in)

Mass (approx.) Front: 0.49 kg (1 lb 2 oz) (with speaker cord) Surround: 0.54 kg (1 lb 4 oz) (with speaker cord)

62US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

Center (SS-CTB122) for BDV-E6100/ BDV-E4100/BDV-E3100 Dimensions (w/h/d) (approx.)

240 mm 90 mm 85 mm (9 1/2 in 3 5/8 in 3 3/8 in)

Mass (approx.) 0.58 kg (1 lb 5 oz) (with speaker cord)

Center (SS-CTB121) for BDV-E2100 Dimensions (w/h/d) (approx.)

225 mm 84 mm 75 mm (8 7/8 in 3 3/8 in 3 in)

Mass (approx.) 0.5 kg (1 lb 2 oz) (with speaker cord)

Subwoofer (SS-WSB123) for BDV-E6100/BDV-E4100/BDV-E3100 Dimensions (w/h/d) (approx.)

225 mm 365 mm 345 mm (8 7/8 in 14 3/8 in 13 5/8 in)

Mass (approx.) 5.8 kg (12 lb 13 oz) (with speaker cord)

Subwoofer (SS-WSB122) for BDV-E2100 Dimensions (w/h/d) (approx.)

220 mm 305 mm 255 mm (8 3/4 in 12 1/8 in 10 1/8 in)

Mass (approx.) 3.8 kg (8 lb 7 oz) (with speaker cord)

General Power requirements

110 V 240 V AC, 50/60 Hz Power consumption

On: 95 W Standby: 0.3 W (For details on the setting, see page 41.)

Dimensions (w/h/d) (approx.) 430 mm 50.5 mm 296 mm (17 in 2 in 11 3/4 in) incl. projecting parts

Mass (approx.) 2.7 kg (5 lb 16 oz)

Design and specifications are subject to change without notice.

Standby power consumption: 0.3W Over 85% power efficiency of amplifier

block is achieved with the full digital amplifier, S-Master.

63US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Left

Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali 1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian 1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian 1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati 1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho 1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese 1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish 1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili 1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil 1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu 1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik 1066 Bengali; 1248 Indonesian 1393 Occitan 1528 Thai

Bangla 1253 Icelandic 1403 (Afan)Oromo 1529 Tigrinya 1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen 1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog 1079 Catalan 1261 Japanese 1428 Polish 1534 Setswana 1093 Corsican 1269 Yiddish 1435 Pashto; 1535 Tonga 1097 Czech 1283 Javanese Pushto 1538 Turkish 1103 Welsh 1287 Georgian 1436 Portuguese 1539 Tsonga 1105 Danish 1297 Kazakh 1463 Quechua 1540 Tatar 1109 German 1298 Greenlandic 1481 Rhaeto- 1543 Twi 1130 Bhutani 1299 Cambodian Romance 1557 Ukrainian 1142 Greek 1300 Kannada 1482 Kirundi 1564 Urdu 1144 English 1301 Korean 1483 Romanian 1572 Uzbek 1145 Esperanto 1305 Kashmiri 1489 Russian 1581 Vietnamese 1149 Spanish 1307 Kurdish 1491 Kinyarwanda 1587 Volapk 1150 Estonian 1311 Kirghiz 1495 Sanskrit 1613 Wolof 1151 Basque 1313 Latin 1498 Sindhi 1632 Xhosa 1157 Persian 1326 Lingala 1501 Sangho 1665 Yoruba 1165 Finnish 1327 Laothian 1502 Serbo-Croatian 1684 Chinese 1166 Fiji 1332 Lithuanian 1503 Singhalese 1697 Zulu 1171 Faroese 1334 Latvian; 1505 Slovak 1174 French Lettish 1506 Slovenian 1181 Frisian 1345 Malagasy 1703 Not specified

64US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\100ADD.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

Parental Control/Area Code List

Code Area Code Area Code Area Code Area 2044 Argentina 2109 Germany 2362 Mexico 2499 Sweden 2047 Australia 2200 Greece 2376 Netherlands 2086 Switzerland 2046 Austria 2219 Hong Kong 2390 New Zealand 2543 Taiwan 2057 Belgium 2248 India 2379 Norway 2528 Thailand 2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United 2090 Chile 2239 Ireland 2424 Philippines Kingdom 2092 China 2254 Italy 2428 Poland 2093 Colombia 2276 Japan 2436 Portugal 2115 Denmark 2304 Korea 2489 Russia 2165 Finland 2333 Luxembourg 2501 Singapore 2174 France 2363 Malaysia 2149 Spain

65US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\010COVIX.fm

masterpage: Left

Index

Numerics 3D 25 3D Output Setting 44

A A/V SYNC 35 Attenuate - AUDIO 46 Audio DRC 46 Audio Language 47 Audio Output 46 Audio Return Channel 48 Audio Settings 46 Auto Display 48

B BD Audio MIX Setting 46 BD Hybrid Disc Playback Layer 47 BD Internet Connection 47 BD Parental Control 48 BD/DVD Menu Language 47 BD/DVD Viewing Settings 47 BD-LIVE 24 BD-ROM 24p Output 45 Bluetooth 26 BONUSVIEW 24 BRAVIA Sync 38

C CD 58 Child Lock 40 Cinema Conversion Mode 45 Connection Server Settings 49 Control for HDMI 38, 48

D DLNA 31, 49 Dolby Digital 35 DTS 35 DVD 58 DVD Aspect Ratio 45 DVD Parental Control 48 DVD-ROM 24p Output 45

E Easy Network Settings 50 Easy Setup 21

F FM Mode 36 Front panel 11 Front panel display 12

G Gracenote Settings 48

H HDMI

YCbCr/RGB (HDMI) 45 HDMI Deep Color Output 45

I Initialize Personal Information 50 Internet content 30 Internet Settings 49 Internet Video Parental Control 48 Internet Video Unrated 48

L Language Code List 64

66US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\010COVIX.fm

masterpage: Right

A d

d itio

n al In

fo rm

atio n

M Main Unit illumination 48 Multiplex broadcast sound 36

N Network Connection Diagnostics 49 Network Settings 49 Network Update 44 NFC 28

O OSD Language 48

P Parental Control Area Code 47 Parental Control Settings 47 PARTY Auto Start 49 Password 47 Pause Mode 46 Play information 25 Playable discs 58

Q Quick Start Mode 48

R Rear panel 12 Region code 59 Registered Remote Devices 49 Remote control 13 Remote Start 49 Renderer Access Control 49 Renderer Options 49 Reset to Factory Default Settings 50 Resetting 50

S Screen Format 44 Screen Saver 48 Screen Settings 44 SLEEP 40 Slideshow 34 Software License Information 49 Sound Effect 46 Speaker Settings 38, 47

Distance 39 Level 39

Subtitle Language 47 System Information 49

T Test Tone 39 TV Screen Size Setting for 3D 44 TV Type 44

U Update 44 USB 26

W WEP 20 WPA2-PSK (AES) 20 WPA2-PSK (TKIP) 20 WPA-PSK (AES) 20 WPA-PSK (TKIP) 20

67US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100 4-446-733-42(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100 (PMRF 06)\4446733421_US (PX3)\110BCO.fm

masterpage: Left

2013 Sony Corporation Printed in Malaysia

The software of this system may be updated in the future. To