Contents

Sony NV-U73T Instruction Manual PDF

1 of 31
1 of 31

Summary of Content for Sony NV-U73T Instruction Manual PDF

NV-U83T NV-U73T

Personal Navigation System

Instruction Manual

2008 Sony Corporation

3-292-494-12 (1)

Instruction Manual US

2

Using the manuals The following manuals are included with the unit. Before installing or operating the unit, read these manuals thoroughly and retain them for future reference.

Read This First Contains instructions on how to install the unit in your car, the location of controls, and the featured navigation operations.

Before You Use Contains important notices to be read prior to use, including warnings, specifications, and troubleshooting instructions.

Quick Guide for Bluetooth Hands-free Calling (NV-U83T only) Contains instructions on Bluetooth function basic operations.

Instruction Manual (PDF) (this manual) Contains descriptions of all functions.

Notes on this manual This manual contains instructions for the NV-

U83T and U73T. NV-U83T is the model used for illustration

and screenshot purposes. Available functions such as POSITION plus

or Bluetooth differ depending on the model. Check your model name and refer to the different indications in each section of this manual.

Illustrations and screenshots in this manual may differ from the actual device.

3

4

Table of Contents

Basic Operations 6

Menu operations. . . . . . . . . . . . . . . . . . . . . . . . .6

Gesture Command operations . . . . . . . . . . . . . .6

Keyboard operations . . . . . . . . . . . . . . . . . . . . .7

Navigation 8

Checking the GPS status . . . . . . . . . . . . . . . . . .8

Route searching . . . . . . . . . . . . . . . . . . . . . . . . .8 Address search. . . . . . . . . . . . . . . . . . . . . . . .8 Home search . . . . . . . . . . . . . . . . . . . . . . . . .9 POI search . . . . . . . . . . . . . . . . . . . . . . . . . .10 Intersection search . . . . . . . . . . . . . . . . . . . .11 City center search . . . . . . . . . . . . . . . . . . . .11 Recent destinations search. . . . . . . . . . . . . .11 Address book search . . . . . . . . . . . . . . . . . .11 Favorites search . . . . . . . . . . . . . . . . . . . . . .12 Option menu in the address/POI confirmation display . . . . . . . . . . . . . . . . . .12

Map operations. . . . . . . . . . . . . . . . . . . . . . . . .12 Indications on the map. . . . . . . . . . . . . . . . .12 Map scrolling mode . . . . . . . . . . . . . . . . . . .13 Using the map tool. . . . . . . . . . . . . . . . . . . .14

Route planning . . . . . . . . . . . . . . . . . . . . . . . . .14 Creating a new itinerary . . . . . . . . . . . . . . .14 Option menu for route planning . . . . . . . . .15 Adding an interim destination to the current route. . . . . . . . . . . . . . . . . . . . . . . . .16 Skipping the current destination . . . . . . . . .16

Route confirmation. . . . . . . . . . . . . . . . . . . . . .16 Viewing the turn-by-turn list . . . . . . . . . . . .16 Viewing the entire route . . . . . . . . . . . . . . .16

TMC information . . . . . . . . . . . . . . . . . . . . . . .17 Checking traffic information . . . . . . . . . . . .17 Selecting the traffic information type . . . . .18

Destination management . . . . . . . . . . . . . . . . .18 Recent destinations . . . . . . . . . . . . . . . . . . .18 Address book . . . . . . . . . . . . . . . . . . . . . . . .18 Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Bluetooth Function (NV-U83T only) 19

Activating the Bluetooth signal . . . . . . . . . . . . 20

Pairing with a cellphone . . . . . . . . . . . . . . . . . 20 Searching from this unit . . . . . . . . . . . . . . . 20 Searching from a cellphone . . . . . . . . . . . . 20

Connecting to a cellphone . . . . . . . . . . . . . . . . 20

Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Dialing a phone number . . . . . . . . . . . . . . . 21 Using the list of recent calls . . . . . . . . . . . . 21 Using the phone book . . . . . . . . . . . . . . . . . 21 Using preset numbers . . . . . . . . . . . . . . . . . 22 Other ways to make calls . . . . . . . . . . . . . . 22

Receiving calls. . . . . . . . . . . . . . . . . . . . . . . . . 22

Operations during a call. . . . . . . . . . . . . . . . . . 22 Showing the map . . . . . . . . . . . . . . . . . . . . 23 Transferring the current call to a cellphone. . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Entering numbers . . . . . . . . . . . . . . . . . . . . 23 Ending a call . . . . . . . . . . . . . . . . . . . . . . . . 23

Call data management . . . . . . . . . . . . . . . . . . . 23 Recent calls . . . . . . . . . . . . . . . . . . . . . . . . . 23 Phone book . . . . . . . . . . . . . . . . . . . . . . . . . 23

Settings 24

Address book settings . . . . . . . . . . . . . . . . . . . 24

General settings . . . . . . . . . . . . . . . . . . . . . . . . 24

Map settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Route profile settings. . . . . . . . . . . . . . . . . . . . 26

Guidance settings. . . . . . . . . . . . . . . . . . . . . . . 26

Traffic Information settings. . . . . . . . . . . . . . . 27

Phone settings (NV-U83T only) . . . . . . . . . . . 27

5

Using the Supplied Software 28

System requirements . . . . . . . . . . . . . . . . . . . . 28

Installing the software . . . . . . . . . . . . . . . . . . . 28

Connecting the unit to your computer . . . . . . . 28

Starting the software . . . . . . . . . . . . . . . . . . . . 29

Guidance voice data management . . . . . . . . . . 29

Map data management. . . . . . . . . . . . . . . . . . . 30

Address book data management . . . . . . . . . . . 30 Editing the address book data on your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Editing the address book data on the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Transferring address book data from your computer to the unit . . . . . . . . . . . . . . 31 Transferring address book data from the unit to your computer . . . . . . . . . . . . . . 31

Firmware upgrade . . . . . . . . . . . . . . . . . . . . . . 31

6

Basic Operations

Common procedures to operate the system are explained. General operations can be performed on the touch screen. Gently touch the displayed icons with your finger.

Note Do not press the display with excessive force. Do not use any sharp object, such as a pen, etc., to tap on the display.

Menu operations The main menu appears when you turn on the unit (except during route guidance, in which case the map appears).

1 Touch to show the main menu. 2 To check the Bluetooth status* (page 19),

battery status, and current time. 3 During route guidance:

Touch to hear the next voice guidance and to show the current position. In other cases: Touch to show the map display.

4 Touch to show the navigation menu. 5 Touch to show the application menu. 6 Touch to show the setting menu. 7 Touch to return to the previous display.

* NV-U83T only.

Other basic menu operations

About the battery status indication The battery status can be checked by the indicator in the main menu.

Gesture Command operations In the map display (except in map scrolling mode), frequently-used operations can be performed by assigning finger strokes such as a line, etc.

To Touch

cancel the setting Cancel

confirm the selection/ proceed to the next step

Done or OK

MENU

VOICE/ POS.

4

1

3 5 6 7

2

Indicator Status

Charging.

Fully charged.

Not fully charged.

Low battery.

Battery is empty. Charge battery immediately.

To Draw

start navigation to your home (page 9)

a circumflex

start navigation to a destination stored in Favorites (page 12)

Favorite 1

a letter L shape

Favorite 2

a mirror-reversed L

change map scale to the Preset Scale (page 26)

a clockwise circle

a counterclockwise circle

call your home (NV- U83T only) (page 22)

a letter V shape

7

Keyboard operations The keyboard display appears when you need to enter text. When entering addresses, you need only enter characters in upper case, as the system automatically converts them to appropriate characters. You can change the case or enter special characters/symbols when necessary.

The following types of keyboards are selectable:

QWERTY + 123: QWERTY layout with number keys.*

QWERTY: Large QWERTY layout without number keys.*

ABC: Alphabetical layout without number keys.

* QWERTY refers to the top row of letters, reading from the left, of a traditional typewriter style keyboard.

For details on how to change the setting, see page 25.

QWERTY layout with number keys:

*1 When another keyboard type is selected, touch 123 to switch to the numeric keyboard.

*2 The candidate list automatically appears when candidates are narrowed down as you continue inputting characters.

To Touch

enter an alphabetical character

the desired character key

enter a number the desired number key*1

enter a special character

to switch to the special character keyboard, then the desired character; and ABC to switch back

enter a symbol @!? to switch to the symbol keyboard, then the desired symbol key; and ABC to switch back

enter a space Space

delete a character Backspace

change the case Caps

confirm the entry*2 Done

Entry field

8

Navigation

Checking the GPS status

About the GPS status indication The GPS status can be checked by the color of the current position icon. If the current position is not displayed, touch VOICE/POS. to show the icon.

* Available only for NV-U83T.

Note Acquisition of GPS signal may take up to 10 minutes, especially for the first time. Make sure that you are in an open space for faster acquisition.

Viewing detailed GPS status information Detailed GPS status information, such as the latitude, longitude, etc., can be viewed to check if the current position is properly calculated.

1 In the menu display, touch , General, then GPS Status.

Route searching You can search for a route in various ways.

The following route search methods are available. Address search (page 8) Home search (page 9) POI search (page 10) Intersection search (page 11) City center search (page 11) Recent destinations search (page 11) Address book search (page 11) Favorites search (page 12)

Address search Address search allows you to set the destination by entering the address information such as house number, street name, etc.

Note on the state selection The system recognizes the state you usually drive in and sets it as default, so that you do not need to enter the same state name at each address search. When GPS detects that the current position is not in the default state, the state selection display automatically appears, allowing you to set the desired state.

Indication Status

Signals are insufficient for navigation (less than 3 GPS satellites are received).

Reception temporarily interrupted (e.g., in a tunnel). The built-in sensor (POSITION plus)* calculates the current position instead.

Signals are sufficient for navigation.

Current position icon

9

Full address search Follow the procedure below if you know the house number, street name, and the city name of the destination.

1 In the menu display, touch , then Enter Address. If the state selection display appears, select the new (current) state or Change to Different State. When selecting Change to Different State, enter the state name, then select the desired state. The house number input display appears.

2 Enter the house number. The street name input display appears.

3 Enter the street name. The list of street candidates appears.

4 Select the desired street in the list. If more than one city candidate exists, the list of city candidates appears. In this case, select the desired city. The address confirmation display appears.

5 Select Calculate Route. The route is calculated, and route guidance starts.

Street search If the house number is not known, a search can be made to an approximate point on the street.

1 In the menu display, touch , then Enter Address. If the state selection display appears, select the new (current) state or Change to Different State. When selecting Change to Different State, enter the state name, then select the desired state. The house number input display appears.

2 Select Skip without entering the house number. The search method options appear.

3 Select Representative Point of the Street. The street name input display appears.

4 Enter the street name. The list of street candidates appears.

5 Select the desired street in the list. If more than one city candidate exists, the list of city candidates appears. In this case, select the desired city. The address confirmation display appears.

6 Select Calculate Route. The route is calculated, and route guidance starts.

To set the destination in another state You can select a different state in the house number/street name input display. Select State, enter the state name, then select the desired state.

Home search If you register your home, you can search for a route there. For details on registering your home, see page 24.

1 In the menu display, touch , then Take Me Home. The route is calculated, and route guidance starts.

Tip If you select Take Me Home without having registered a home address, the registration display automatically appears.

With Gesture Command In the map display, draw .

10

POI search POI (Points Of Interest) search allows you to set facilities such as restaurants, hotels, gas stations, etc., as the destination. The system searches for POIs near the current position.

To search for the POIs in another city You can specify the city before selecting the POI search method. In this case, the system searches for POIs in the city center.

1 In the menu display, touch , then Find a Place. The search method selection display appears.

2 Select Points of Interest.

3 Select Change City.

4 Enter the city name.

5 Select the desired city in the list.

To switch back to the nearby search, select Nearby.

By POI name You can search for a route to a POI by directly entering its name.

1 In the menu display, touch , then Find a Place. The search method selection display appears.

2 Select Points of Interest.

3 Select By Name. The POI name input display appears.

4 Enter the POI name. The list of POI candidates appears in order of distance from the current position.

5 Select the desired POI. The POI confirmation display appears.

6 Select Calculate Route. The route is calculated, and route guidance starts.

Tip If there are too many POI candidates in the list after step 4 above, you can narrow down by selecting category(ies). Select Category to show the category list, then select the desired category(ies).

By POI category You can search for a route to a POI by selecting its category(ies).

1 In the menu display, touch , then Find a Place. The search method selection display appears.

2 Select Points of Interest.

3 Select Category. The list of category candidates appears.

4 Select the desired category. Select sub category when necessary until the POI candidates are narrowed down. The list of candidates appears in order of distance from the current position.

5 Select the desired POI. The POI confirmation display appears.

6 Select Calculate Route. The route is calculated, and route guidance starts.

Tip If there are too many POI candidates in the list after step 4 above, you can narrow down by entering the POI name. Select Name to show the POI name input display, then enter the POI name.

1

1

Intersection search The intersection can be set as a destination, if available for the selected street.

1 In the menu display, touch , then Find a Place. The search method selection display appears.

2 Select Find Intersection. The street name input display appears.

3 Enter the street name. The list of street candidates appears.

4 Select the desired street in the list. If more than one city candidate exists, the list of city candidates appears. In this case, select the desired city. The street name input display appears.

5 Enter the other street name. The list of street candidates appears.

6 Select the street. The address confirmation display appears.

7 Select Calculate Route. The route is calculated, and route guidance starts.

Tip The intersection search can also be made by selecting Enter Address in step 1 above and skipping the house number input. For details, see Street search on page 9.

City center search The city center can be set as a destination.

1 In the menu display, touch , then Find a Place. The search method selection display appears.

2 Select Find City. The city name input display appears.

3 Enter the city name. The list of city candidates appears.

4 Select the desired city in the list. The address confirmation display appears.

5 Select Calculate Route. The route is calculated, and route guidance starts.

Tip The city center search can also be made by selecting Enter Address in step 1 above and skipping the house number input. For details, see Street search on page 9.

Recent destinations search The system stores previous destinations, allowing you to select one quickly from the list. For details on how to delete the history, see page 18.

1 In the menu display, touch , then My Places. The search method selection display appears.

2 Select Recent Destinations. The list of searched destinations appears in reverse chronological order.

3 Select the desired item in the list. The address/POI confirmation display appears.

4 Select Calculate Route. The route is calculated, and route guidance starts.

Address book search You can select the destination saved in the address book. For details on how to manage the address book, see page 18.

1 In the menu display, touch , then My Places. The search method selection display appears.

2 Select Address Book. The list of groups appears.

3 Select the desired group. The list of data in the selected group appears in alphabetical order.

4 Select the desired entry in the list. The address/POI confirmation display appears.

5 Select Calculate Route. The route is calculated, and route guidance starts.

12

Favorites search You can select a destination that is saved in the Favorites. For details on how to manage Favorites, see page 19.

1 In the menu display, touch , then My Places. The search method selection display appears.

2 Select Favorite 1, Favorite 2, Favorite 3, or Favorite 4. The route is calculated, and route guidance starts.

With Gesture Command In the map display, draw one of the command strokes: Favorite 1: Favorite 2:

Option menu in the address/POI confirmation display The option menu in the address/POI confirmation display provides various useful operations. When the confirmation display appears after setting a destination, select Options before selecting Calculate Route, then one of the following items.

*1 Appears depending on your selection. Edit Item appears when you select My Places c Address Book. In other cases, Save to Address Book appears.

*2 Available only during route guidance.

Map operations

Indications on the map

When no route guidance is in progress:

During route guidance: Straight-ahead driving

Approaching an intersection

Save to Address Book*1 (page 18) Saves the selected point to the address book.

Edit Item*1 (page 24) Edits the selected address book entry.

Interim Destination*2 (page 16) Adds the point as an interim destination in the current route. The system navigates you to this point before the current destination.

BA C

D

E F

G

H

3

1

Approaching an intersection (closer)

Approaching an intersection (even closer)

A Current direction/current speed B Current position/GPS status indication

(page 8) C North indicator/current time D Current street name E ETA (Estimated Time of Arrival)/distance to

destination F Distance to next turn G Next instruction H Next turn instruction I Magnified view of an intersection J Bar indication of the distance to next turn K Current position

Tip You can set to hide the magnified view of an intersection (page 27).

Map scrolling mode You can switch to map scrolling mode by touching the map, whether during route guidance or not. By placing the desired point into the crosshair, you can view the information on the point or open the map option menu.

Operations in map scrolling mode

JI

K

To Operation

scroll a map drag the screen

move the desired point to the center of the screen

touch the point

pan the map left/ right

touch and hold a point and drag it left/right

14

Using the map tool The map tool bar appears when you touch Options on the map display.

1 To show the main menu. 2 To check the TMC status/show the traffic

messages on the current route (page 17). 3 To show the call in progress display

(page 22).* 4 During route guidance:

To hear the next voice guidance and show the current position. In other cases: To show the map display.

5 To show more map options. 6 To show the turn-by-turn list (page 16). 7 To zoom in/out the map.

Touch / . 8 To adjust the voice guidance volume.

Touch / . 9 To hide the map tool bar.

* NV-U83T only. Appears only during a call.

More map options More options are available by selecting More in the map tool bar.

*1 Available only for the point selected in map scrolling mode.

*2 Available only for address book entry icons. *3 Available only during route guidance. *4 Appears when >> is touched.

Route planning

Creating a new itinerary The procedure to create a new itinerary is explained below.

1 In the menu display, touch , then Route Planning.

2 Select Route Planning, then Options.

3 Select New Route. The route planning display appears in which the current position is set as the start point.

For details on how to change the start point, see Editing route points on page 15.

4 Select Add to add a route point in your itinerary. The search method selection display appears.

5 Select the desired search method to set the route point.

Navigate to Here*1

Starts route guidance to the point.

Save to Address Book (page 18) Saves the point to the address book.

Edit Item*2 (page 24) Edits the address book entry.

Quit Navigation*3

Exits the current route guidance.

Next Route Destination*3*4 (page 16) Reroutes to skip the current destination.

MENU

VOICE/ POS.

5

1

4 6 7 8 9

2 3

Select To set

Enter Address by address search (page 8)

Home your home as the route point (page 9)

Find a Place by POI search (page 10), intersection search (page 11), or city center search (page 11)

My Places by recent destinations search (page 11), address book search (page 11), or Favorites search (page 12)

Browse Map a route point from the map display (page 13)

Current Position

the current position as the route point

5

1

6 After setting the route point, select Done. The route planning display reappears with the selected point added in the list.

The last setting is listed as the final destination. Repeat step 4 to 6 to continue adding route points. Up to 10 route points can be set.

7 Select Calculate Route. The route calculation starts. After the calculation is complete, the route confirmation display appears.

8 Select one of the following items.

Editing route points You can edit the selected route points while creating an itinerary. Select the desired route point in the route planning display, then one of the following items.

Tip You can open the route planning display and modify your itinerary, even after starting route guidance.

Option menu for route planning The option menu in the route planning/route confirmation display provides various useful operations. When the route planning/route confirmation display appears, select Options, then one of the following items.

* Appears only in the option menu of the route planning display while setting the route point(s).

Start Navigation To start the route guidance.

Change Condition To set the route calculation conditions. Standard: Sets a recommended route. Avoid Toll Roads: Avoids the use of toll

roads. Avoid Toll Roads (Shortest): Sets a

distance-optimized route without toll roads.

Change Location Shows the search method selection display to set the route point again.

Delete Deletes the selected point from the itinerary.

Change Order Changes the order of route points.

Select the point to move c Up/Down c Done.

Save Route Saves the current route.

Saved Routes* Edits the route/starts the route guidance.

Select the route, then one of the following options. Edit: Shows the route planning display to

edit the route point. Rename: Changes the name of the selected

route. Delete: Deletes the selected route. Start Navigation: Starts the route guidance.

Route Profile (page 26) Shows/changes the current route profile settings.

New Route* Shows the route planning display to create a new itinerary.

Calculation Condition* To set the route calculation conditions. For details on options, see page 15.

16

Adding an interim destination to the current route During route guidance, you can add an interim destination.

1 In the menu display, touch , then select the desired search method to set the interim destination. For details on search methods, see Route searching on page 8. You can select the desired search method, except for home search and Favorites search.

2 After setting the interim destination, select Options in the address/POI confirmation display.

3 Select Interim Destination. The route guidance to the interim destination starts.

Skipping the current destination If more than one destination point exists during route guidance, you can choose to reroute and skip the current destination.

1 In the map display, select Options, More..., then >>.

2 Select Next Route Destination. The current destination is skipped, and recalculation starts.

Route confirmation

Viewing the turn-by-turn list

1 In the map display, select Options, then Directions. The turn-by-turn list appears.

2 Select the desired item to show the detailed information.

Viewing the entire route During route guidance, you can view the entire route to the destination.

1 In the map display, select Options, then Directions.

2 Select Route Confirmation. The entire route appears.

To change the route calculation conditions

1 Select Change Condition, then the desired option. For details on options, see page 15.

2 Select Calculate Route. Recalculation starts.

7

1

TMC information The built-in TMC (Traffic Message Channel) receiver* allows you to receive traffic information. You can check the traffic messages.

* For NV-U83T, the receiver is located in the cradle. For NV-U73T, the receiver is located in the unit.

Checking traffic information

About the TMC status indication The TMC status can be checked by the traffic icon in the map display.

Viewing traffic messages

1 In the menu display, touch , then Traffic Information. The list of traffic messages appears. If the traffic information type set to display is previously selected, the relevant messages appear (page 18).

ATraffic event type BDistance from the current position CState DRoad name ETraffic message

2 Select the desired message to view detailed information.

To view the previous/next message, touch / .

Tip You can jump to the traffic information setting display (page 27) by selecting Settings in the traffic message list.

From the map display If any traffic message exists on the current route, you can open the message list also from the map display by touching . In this case, the messages on the current route appear, regardless of the selected type (page 18).

Indication Status

No icon Out of service. In case of NV- U83T, the TMC cradle may not be attached.

Tuning. No TMC signal is currently receivable.

Traffic information available. Pending messages not regarding on the current route exist.

Traffic congestion on route. Pending messages regarding traffic congestion on the current route exist.

Traffic Icon

A CB D E

18

Selecting the traffic information type You can select the traffic information type to display.

1 Open the list of traffic messages. For details, see Viewing traffic messages on page 17.

2 Select Change Message. The type selection display appears.

3 Select the desired type.

4 Touch . The message list of selected information type appears.

Destination management Destinations on Recent Destinations, Address Book, and Favorites can be managed.

Recent destinations You can delete the history of Recent Destinations.

1 In the menu display, touch , My Places, then Recent Destinations.

2 Select Delete.

3 Select the item to delete. To select all items, select All. To unselect all items, select Clear.

4 Select Done. The selected item(s) is deleted.

Address book You can register the destinations or points on the map to the address book.

From the navigation menu

1 In the menu display, touch , then select the desired search method. For details on search methods, see Route searching on page 8. You can select the desired search method, except for home search, address book search, and Favorites search.

2 After setting the destination, select Options in the address/POI confirmation display.

3 Select Save to Address Book. The registration display appears.

4 Set the following items.

5 Select Done. The destination is added to the address book and indicated by the selected icon on the map.

Select To show

On Route all traffic messages on the current route

Not on Route

all traffic messages not on the current route

Name: Enter the name.

Group: Select the group to categorize. To create a new group, select New Group, then enter the group name.

Phone: Enter the phone number.

Icon: Select the icon to show on the map. To select from the facility icon list, select Facilities Icons c category c sub category c icon.

Sound: Configure the sound setting. Sound Function: Set to ON to have

notification sound upon approach. Sound Source: Select the sound source. Distance of Starting to Play Back: Select

the distance at which the sound will be output.

9

1

From the map option menu

1 In the map display, touch the map to switch to the map scrolling mode, then select the desired point.

2 Select Options, then More... Follow the procedure from step 3 above to add the selected point to the address book.

Tip Further management of address book is available from the setting menu (page 24).

Favorites You can register destinations to Favorite 1, Favorite 2, Favorite 3, and Favorite 4 separately.

1 In the menu display, touch , then General.

2 Select Favorites.

3 Select Favorite 1, Favorite 2, Favorite 3, or Favorite 4.

4 Select the desired search method. For details on search methods, see Route searching on page 8. You can select the desired search method, except for home search and Favorites search.

5 After setting the destination, select Done in the address/POI confirmation display. The destination is stored in the selected Favorite.

To change the registration in Favorites Follow the procedure above and overwrite a registered Favorite.

Bluetooth Function (NV-U83T only)

The following is the basic procedure required for using the Bluetooth function.

1 Bluetooth signal activation Activating the Bluetooth signal is required to connect this unit to a Bluetooth compatible cellphone.

2 Pairing When connecting a cellphone for the first time, mutual registration is required. This is called pairing. This registration (pairing) is required only for the first time, as this unit and the cellphone will recognize each other automatically from the next time.

3 Connection Connect this unit and the cellphone for hands- free calling.

4 Hands-free calling You can make/receive a hands-free call.

About the Bluetooth status indication The Bluetooth status can be checked by the indicator in the main menu.

Indicator Status

Signal is off. You need to activate the signal for connection.

Signal is on, with no cellphone connected. The unit is ready for a connection.

Signal is on, with a cellphone connected. The unit is ready for hands-free calling.

Bluetooth indicator

20

Activating the Bluetooth signal 1 In the menu display, touch , then

Phone.

2 Select Bluetooth Signal, then ON. The signal is activated. The Bluetooth indicator in the bottom right of the unit lights up in blue.

Pairing with a cellphone Pairing is required only the first time you connect to a cellphone.

To pair this unit to a cellphone, you need to enter the same passkey* on this unit and on the cellphone. The passkey can be either your own selected number or the number determined by the cellphone. For details, see the manual of the cellphone.

* Passkey may be called passcode, PIN code, PIN number, password, etc., depending on the cellphone.

Searching from this unit The procedure to search for a cellphone from this unit is explained below. Check that the cellphone is set to allow for searching beforehand.

1 In the menu display, touch , then Phone.

2 Select Add Devices. A message asking you to set the cellphone to detectable appears.

3 Select Search for Phone. After cellphone search is complete, the list of connectable cellphones appears. To list cellphones by address, select Address. To list by name, select Name.* * The address appears instead of the name if

unavailable.

4 Select the cellphone to register. Pairing starts.

5 Enter the passkey. Perform the required operation also on the cellphone. A message appears stating that the pairing is complete.

To connect to the cellphone, select Connect.

Searching from a cellphone The procedure to search for this unit from a cellphone is explained below. In this case, the name of the unit is registered as nav-u, which can be changed in the phone setting (page 27).

1 Start searching for this unit from the cellphone. For details, see the manual of the cellphone. After you perform the required operation on the cellphone, the passkey input display appears on this unit.

2 Enter the passkey. A message appears stating that the pairing is complete.

Connecting to a cellphone Once the Bluetooth signal is activated, the unit searches for the last connected cellphone, and connection is made automatically if possible.

In this chapter, instructions on how to connect manually to paired cellphones are introduced.

Before starting, be sure to activate the Bluetooth signal both on this unit and the cellphone.

1 In the menu display, touch , Phone, then My Devices. The list of paired cellphones appears.

2 Select the cellphone to connect. The confirmation display appears.

3 Select OK. The unit is connected to the selected cellphone. The currently connected cellphone is indicated by in the paired cellphone list.

To disconnect In step 2 above, select the cellphone to disconnect (one that is currently connected) c OK.

1

2

Making calls You can make hands-free calls in various ways.

The following calling methods are available. Dialing a phone number (page 21) Using the list of recent calls (page 21) Using the phone book (page 21) Using preset numbers (page 22) Other ways to make calls (page 22)

Dialing a phone number

1 In the menu display, touch , then Phone. The calling method selection display appears.

2 Select Make a Call, then Numeric Input.

3 Enter the phone number, then select Call. The call is made. The calling display appears until the other party answers.

For details on operations during a call, see page 22.

To cancel calling, touch . To adjust the volume of the hands-free function, touch /+.

Using the list of recent calls The system stores the last 40 calls, allowing you to select one quickly from the list. For details on how to delete the history, see page 23.

1 In the menu display, touch , then Phone. The calling method selection display appears.

2 Select Make a Call, then Recent Calls. The list of recent calls appears.

3 Select the desired item in the list. The call is made. The calling display appears until the other party answers. For details on operations during a call, see page 22.

To cancel calling, touch . To adjust the volume of the hands-free function, touch /+.

Using the phone book You can make a call using the phone book. For details on how to manage the phone book, see page 23.

1 In the menu display, touch , then Phone. The calling method selection display appears.

2 Select Phone Book. The list of data in the phone book appears in alphabetical order.

3 Select the desired entry in the list. The call is made. The calling display appears until the other party answers. For details on operations during a call, see page 22.

To cancel calling, touch . To adjust the volume of the hands-free function, touch /+.

22

Using preset numbers You can make a call quickly using preset phone numbers. For details on how to preset phone numbers, see page 27.

1 In the menu display, touch , then Phone. The calling method selection display appears.

2 Select D1, D2, D3, or Home. The call is made. The calling display appears until the other party answers. For details on operations during a call, see page 22.

To cancel calling, touch . To adjust the volume of the hands-free function, touch /+.

With Gesture Command In the map display, draw to call your home.

Other ways to make calls You can make calls also by the following methods. In the menu display, touch c Phone c Make a Call c the desired item below.

* Available only if the phone number is registered.

Receiving calls With the unit connected to the cellphone, you can receive a call in any status. The following display indicates an incoming call, along with the ring tone.

* Appears only when stored in the phone book.

1 Touch . Hands-free talking starts. For details on operations during a call, see page 22.

To reject the call, touch . To adjust the volume of the hands-free function, touch /+.

Operations during a call Various operations are available from the following call in progress display, which appears during a call.

* Appears only when stored in the phone book.

To adjust the volume of the hands-free function Touch /+.

POI Search* Makes a call to the searched POI. For details on POI search, see page 10.

Search for POI, then select Call in the POI confirmation display.

Voice Dial Makes a call using the voice dial function of your cellphone (if available). For details, see the manual of the cellphone.

Name* and phone number of other party

Volume indicator

Name* and phone number of other party

Volume indicator

Call duration

3

2

Showing the map

1 Touch VOICE/POS. The map and the route guidance (if in progress) appear with displayed on the right side.

To return to the call in progress display, touch .

To show the menu display, touch MENU.

Transferring the current call to a cellphone You can transfer the current call to a cellphone if, for example, you want to leave your car without ending the call.

1 Select Use Cellphone in the call in progress display. The call is transferred to the cellphone, and the map and the route guidance (if in progress) appear with displayed on the right side.

To transfer back to the hands-free call, touch , Use Hands-free, then OK. To show the menu display, touch MENU.

Entering numbers You may need to enter numbers during a call (e.g., to forward the call).

1 Select Numeric Input in the call in progress display. The number input display appears.

2 Enter the required number.

Ending a call

1 Touch in the call in progress display.

Call data management Call data on Recent Calls and Phone Book can be managed.

Recent calls You can delete the history of Recent Calls.

1 In the menu display, touch , then Phone.

2 Select Make a Call, then Recent Calls.

3 Select Delete.

4 Select the item to delete. To select all items, select All. To unselect all items, select Clear.

5 Select Done. The selected item(s) is deleted.

Phone book You can import phone book data from the cellphone or delete unnecessary data.

Importing phone book data from the cellphone Up to 500 entries from the phone book of the cellphone can be imported to this unit.

Before starting, check that the unit is connected to a cellphone.

1 In the menu display, touch , then Phone.

2 Select Receive Phone Book. The confirmation display appears.

3 Select OK. Perform the required operation on the cellphone. For details, see the manual of the cellphone.

4 Select Done to complete. The phone book is imported to the unit.

To continue importing the phone book data, select Continue instead of Done in step 4 above.

Deleting data You can delete unnecessary data in the phone book of this unit.

1 In the menu display, touch , then Phone.

2 Select Phone Book, then Delete.

3 Select the entry to delete. To select all entries, select All. To unselect all entries, select Clear.

4 Select Done. The selected entry(ies) is deleted.

Tip Deleting phone book data on this unit does not delete data on the cellphone, even if you connect the unit to the cellphone (the data will not be synchronized).

24

Settings

The setting menu includes the following categories. Route Planning (page 14) Address Book (page 24) General (page 24) Map (page 26) Route Profile (page 26) Guide (page 26) Traffic Information (page 27) Phone (NV-U83T only) (page 27)

Address book settings The following address book settings are configurable.

In the menu display, touch c Address Book c the desired item c the desired option.

General settings The following settings related to the system are configurable.

In the menu display, touch c select General c the desired item c the desired option.

Edit Item To edit the address book entry.

Select the group, then one of the following items. Entry in the list: Opens the display where you

can delete an entry, or change the name/group/ phone/icon/sound setting.

Move: Categorizes entry(ies) to another group. Select the entry(ies) to move c Done c the new group c OK.

Delete: Deletes an entry(ies). Select an entry(ies) to delete c Done c OK.

Edit Groups To edit the group setting. New Group: Creates a new group. Rearrange Group Order: Changes the order

of groups. Select the group c Up/Down. Edit Group Name: Changes the group name. Delete Group: Deletes the group and all its

entries.

Make Backup To back up the address book data on a Memory Stick Duo.

Restore Address Book To restore the address book data from a Memory Stick Duo.

Import Items To import the address book entry(ies) from a Memory Stick Duo.

Select the file in the Memory Stick Duo c all entries or individual entry c OK c OK.

Export Items To export the address book entry(ies) to a Memory Stick Duo.

Select the group c entry(ies) c Done c Done c Done, select/create a file, then select c OK c OK.

Volume (Operation Sound) To preset the volume level for touch screen operation sound: Level 3, Level 2, Level 1, OFF.

Units To select the distance unit: Kilometers, Miles.

Time Format To select the clock indication: 12hr (AM / PM), 24hr.

Time Zone To set the time zone automatically or manually.

Select Language To select the language for on-screen display.

Display To adjust the display settings. Brightness: Switches the display brightness

automatically or sets the brightness for day time/night time use: Automatic, Day, Night. The brightness level for day time and night time use can be adjusted manually.

Touchscreen Calibration: Performs the touch screen calibration when the touch function is off the mark. Touch the targets in sequence.

Input Home Address To register your home address. Enter Address: Sets from the navigation

menu. For details on how to set the address, see Address search on page 8.

Map: Selects on the map. For details on how to select the point on the map, see Map scrolling mode on page 13.

Start the Configuration Wizard To configure the basic settings by following the wizard (i.e., to perform the Startup Configuration Wizard again).

5

2

Daylight Saving Time To set daylight saving time automatically by GPS or manually. Automatic: Updates automatically by GPS. Manual (+1h)/Manual (+30min): Sets

manually. OFF: Standard time.

GUI Day / Night Mode To select the color theme of menu displays. Automatic: Switches the day time (Day)/

night time (Night) options automatically depending on the time of day.

Day: Suitable for day time use. Night: Suitable for night time use.

Power Saving (Display OFF) To turn off the display automatically after several minutes of inactivity: ON, OFF.

Keyboard Style (page 7) To select the keyboard type: QWERTY + 123, QWERTY, ABC.

Password Lock To lock the unit by setting a 4-digit numerical password to prevent unauthorized access: ON, OFF. Once activated, you will need to enter the password when you turn on the unit.

To activate, select ON c OK, enter the password, then reenter the password to confirm. To deactivate, select OFF c OK, enter the password, then select OK.

Change Password To change the password for locking the unit.

Enter the new password, then reenter the password to confirm.

Reset Factory Default To reset settings to default.

Product Information To view the ID number and status (cradle connection, etc.) of the unit.

GPS Status (page 8) To view the detailed GPS status information.

Firmware Version To view the firmware version.

Memory Stick Information To view the information of the currently inserted Memory Stick Duo, such as used/free space; format the Memory Stick Duo.

To format, select Format c OK repeatedly.

Demonstration Mode Automatic Demonstration: Sets to start the

demonstration automatically after several minutes of inactivity: ON, OFF.

Start Demonstration: Starts the demonstration.

Favorites (page 19) To register destinations in Favorites.

26

Map settings The following map display settings are configurable.

In the menu display, touch c Map c the desired item c the desired option.

Route profile settings The following route profile settings are configurable.

In the menu display, touch c Route Profile c the desired item c the desired option.

Guidance settings The following route guidance settings are configurable.

In the menu display, touch c Guide c the desired item c the desired option.

2D / 3D Map View To select the default map view. 2D: Overhead view. 3D (level 1): Overhead view from a slight

angle. 3D (level 2): Elevated view. 3D (level 3): Drivers view, with horizon.

Map Orientation To select the default orientation of 2D map. In Direction of Travel: Heading up. Always North: North up.

Map Color To select the map color schemes for day time use and night time use.

Automatic Map Color Change To switch the map color scheme automatically. ON: Switches automatically depending on

the time of day. OFF: Always sets to day time colors.

Preset Scale (page 6) To preset the map scale level for clockwise and counterclockwise circles of Gesture Command.

Landmark Icon To show landmark icons on the map. The settings can be configured separately for each facility.

Driving Trail To show driving trail on the map: ON, OFF.

Delete Driving Trail To delete driving trail.

Display Address Book Entries To show the address book entry icons on the map: ON, OFF.

Always Show Traffic Button To always show the traffic icon on the map: ON, OFF.

Road Width To select the width of the road shown on the map: Wide, Standard.

Font Size To select the size of the fonts shown on the map: Large, Medium, Small.

Icon Size To select the size of the icons shown on the map: Large, Medium, Small.

Zoom While Scrolling To zoom out the map/fixes the scale when scrolling: ON, OFF.

Compass and Speedometer To show the current speed and direction on the map when no route guidance is in progress: ON, OFF.

Map Version To view the version of the current map.

Ferries Carpool Lanes To set the preference for using ferries or carpool lanes when calculating a route. Allow: Allows the use. Avoid: Allows the use only when no

alternative is available.

Traffic Information To calculate an alternative route when traffic messages are received: Use, Not Use.

Driving Route History To use the driving route history when calculating the route: Use, Not Use.

Calculation Condition To set the route calculation conditions. Standard: Sets a recommended route. Avoid Toll Roads: Avoids the use of toll

roads. Avoid Toll Roads (Shortest): Sets a distance-

optimized route without toll roads.

Volume (Guide) To preset the volume level for voice guidance: Level 3, Level 2, Level 1, OFF.

Voice Attention (Merge) To activate the audio warning on merge: ON, OFF.

7

2

Traffic Information settings The following traffic information settings are configurable.

In the menu display, touch c Traffic Information c the desired item c the desired option.

* Applicable only when Traffic Information is set to Use in the route profile setting (page 26).

Phone settings (NV-U83T only) The following phone settings are configurable.

In the menu display, touch c Phone c the desired item c the desired option.

*1 The name of Home cannot be changed. *2 Available only if data exists in the phone book.

Automatic Zoom To change the map scale automatically depending on the driving speed. The faster the speed, the larger the map scale: ON, OFF.

Intersection Zoom To show the magnified view of an intersection: ON, OFF.

Select Voice To select the guidance voice type. For details on how to import guidance voice data from your computer, see Guidance voice data management on page 29.

To show the data on the unit/Memory Stick Duo, select Unit/Memory Stick. To register and activate the imported item, select the item c Activate. To select the desired item, select the item c Done c OK. To delete the item, select the item to delete c Delete c OK.

Status Information To check the name, frequency, and reception level of the current TMC station.

Recalculate Route* To calculate an alternative route automatically to avoid a new traffic event when detected on the current route: ON, OFF.

Indication in the Map To show the following indications on the map: ON, OFF. Traffic Control Point Traffic Control Section

Activate TMC Service To activate the Pay-TMC-Services.

Select Activate, then enter the activation code.

My Devices (page 20) To select the cellphone to connect for a hands- free call or phone book import; delete the registration of the cellphone.

To delete the registration, select Delete c the cellphone(s) to delete c Done c OK.

Add Devices (page 20) To pair the unit and the cellphone.

Bluetooth Signal (page 20) To activate the Bluetooth signal: ON, OFF.

Bluetooth Device Info To view the information of this unit, such as the name, address, or compatible profile; edit the device name.

To edit the device name, select Edit, then enter the new name.

Receive Phone Book (page 23) To import the phone book data of the cellphone to this unit.

Volume (Ring Tone) To preset the ring tone volume.

Speed Dial To preset/edit phone numbers on D1/D2/ D3/Home. New Input: Registers the phone number and

the name.*1

Edit: Changes the phone number and/or the name.*1

Copy from Phone Book: Registers the phone number copied from the phone book.*2

Clear: Deletes the registration of the selected preset.

Noise / Echo Cancellation To reduce echo and noise in phone call conversations.

Select Mode 1 normally. Select Mode 2 or OFF if the sound quality is unsatisfactory.

28

Using the Supplied Software

You can install the software to your computer from the supplied disc. Using the software, you can manage various data to use on the unit.

System requirements Computer IBM PC/AT compatible machines CPU: Pentium III Processor 800 MHz or faster Hard Disc space: 300 MB or more (500 MB or more recommended) RAM: 128 MB or more (256 MB or more recommended) USB port

OS Microsoft Windows 2000 Professional with Service Pack 4 (or later) Microsoft Windows XP Home Edition/Professional with Service Pack 2 (or later) Microsoft Windows XP Media Center Edition/Media Center Edition 2004/Media Center Edition 2005 Microsoft Windows Vista Home Basic/Home Premium/Business/Ultimate

Monitor High color (16-bit color) or more, 1024 768 dots or more

Other Internet connection for data download and support

Notes The following system environments are not supported.

Non IBM PC type computers, such as NEC PC 98 series, Macintosh, etc. Homemade computers OS upgraded computers Multi-monitor environment Multi-boot environment

Depending on the computer condition, operation may not be possible even with the recommended environment.

Installing the software 1 Turn on your computer and start Windows.

Log on using an account with administrator privileges.

2 Insert the supplied disc into your computers drive. The Install Wizard appears.

3 Follow the on-screen instructions and complete the installation.

Connecting the unit to your computer 1 Turn on the unit and your computer.

2 Connect the unit to your computer with the USB cable. The data communication between your computer and the unit starts.

Note During communication, do not: disconnect the USB cable. turn off or reset the unit. shut down the computer, enter computer standby mode, or restart the computer.

Disconnecting After the data communication is complete, exit the software, then disconnect the USB cable.

9

2

Starting the software 1 Start the software.

Click start, then select (All) Programs c nav-u tool c nav-u tool. The main menu appears.

1 To manage the map data (page 30). 2 To manage the address book data (page 30). 3 To select the language for software on-screen displays. 4 To upgrade the firmware (page 31). 5 To manage guidance voice data (page 29). 6 To access to the Sony navigation support site. 7 To exit the software.

Guidance voice data management You can transfer guidance voice data from your computer to the unit, using the software. Before starting, connect the unit to your computer and start the software.

You can also transfer data to the Memory Stick Duo inserted in the unit.

1 In the main menu of the software, select Guidance Voice Manager. If the guidance voice data on your computer does not appear, select Browse, then specify the data location on your computer.

2 Select the drive corresponding to the unit/Memory Stick Duo.

3 In the list, check the box(es) of the guidance voice data to transfer, then select >>. Transfer starts. If free space is insufficient on the unit/Memory Stick Duo, a notification appears. Delete unnecessary data by selecting OK c Show in Target c the data to delete c Delete c OK c OK.

4 Select OK. The guidance voice data is transferred to the unit/Memory Stick Duo. For details on how to select the transferred data on the unit, see page 27.

1

2

3

4

5

6

7

30

Map data management You can transfer and replace the map data on the unit, using the software (e.g., to restore map data if necessary). Before starting, connect the unit to your computer and start the software. To transfer the map data on the supplied/optional disc, insert the disc.

1 In the main menu of the software, select Map Manager. If the map data does not appear, select Browse, then specify the data location.

2 In the list, check the box of the map to transfer, then select >>. Transfer starts.

3 Select OK. The map on the unit is replaced.

Address book data management Address book data on the unit or your computer can be managed using the software. You can transfer or import the address book data on the unit or your computer.

Editing the address book data on your computer You can edit the address book data on your computer.

1 In the main menu of the software, select Address Book Manager. If the data does not appear in the list, select Browse, then specify the data location.

2 Select the group/entry to edit, then the desired edit menu.

3 Select OK after editing is complete. The address book data on the computer is updated.

To delete the group/entry In step 2 above, select the group/entry to delete c Delete c OK c OK.

Editing the address book data on the unit You can edit the address book data on the unit, using the software. Before starting, connect the unit to your computer and start the software.

1 In the main menu of the software, select Address Book Manager.

2 Select Edit Address Book of the Unit on the left side of the screen. Follow steps 2 to 3 of Editing the address book data on your computer on page 30 to edit the address book data on the unit, then select Apply to the Unit.

Select To

Add add a new group/entry.

Edit edit the selected group/entry.

1

3

Transferring address book data from your computer to the unit You can transfer address book data from your computer to the unit, using the software. Before starting, connect the unit to your computer and start the software.

1 In the main menu of the software, select Address Book Manager.

2 Select Transfer Address Book from PC to the Unit on the left side of the screen. If the data does not appear in the list, select Browse, then specify the data location.

3 Check the box(es) of the group(s)/entry(ies) on your computer.

4 Select Transfer. Transfer starts. If free space is insufficient on the unit, a notification appears. Delete unnecessary data from the unit (page 30).

5 Select OK. The address book data is transferred to the unit.

Transferring address book data from the unit to your computer You can transfer address book data from the unit to your computer, using the software. Before starting, connect the unit to your computer and start the software.

1 In the main menu of the software, select Address Book Manager.

2 Select Save Address Book of the Unit on the left side of the screen.

3 Check the box(es) of the group(s)/entry(ies) on the unit.

4 Select Save to PC. Transfer starts. If free space is insufficient on your computer, a notification appears. Delete unnecessary data from your computer.

5 Select OK. The address book data is transferred to your computer.

Firmware upgrade You can download firmware upgrades from the Sony navigation support site to your computer, and upgrade the firmware of the unit using the software. Before starting, connect the unit to your computer and start the software.

1 In the main menu of the software, select Upgrade System.

2 In the list, select the latest upgrade data, then Upgrade. The conf

Manualsnet FAQs

If you want to find out how the NV-U73T Sony works, you can view and download the Sony NV-U73T Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sony NV-U73T as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sony NV-U73T. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony NV-U73T Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony NV-U73T Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony NV-U73T Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony NV-U73T Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony NV-U73T Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.