Sony PCWA-DE30 Quick Start Guide PDF

1 of 1
1 of 1

Summary of Content for Sony PCWA-DE30 Quick Start Guide PDF

4-676-912-11(1)

Continued on next page

Unpacking When you unpack the unit, make sure that all the following items are present.

Wireless Unit Power Unit

Power cord

CD-ROM (Setup disc)

Read This First

Quick Start Guide (this document)

Troubleshooting Guide

Limited Warranty

Capabilities Wireless access to the Internet for devices with Ethernet connectors

The 2.4 GHz Wireless LAN Converter PCWA-DE30 (hereafter referred to as the Wireless LAN Converter) is designed to allow devices such as desktop computers or printers equipped with Ethernet connectors to become part of a wireless network.

Notes

Only use an Ethernet cable to connect the Wireless LAN Converter to the Ethernet device.

The Wireless LAN Converter does not function as an Access Point.

When setting up the Wireless LAN Converter without the Quick Setup switch, a computer running the Windows Me, Windows 2000, or Windows XP operating system is required.

Only one device can be connected to the Wireless LAN Converter. You cannot use a hub to connect to several devices.

You cannot use the Wireless LAN Access Point PCWA-A500, the Wireless LAN Converter PCWA-DE50, or the Wireless LAN PC Card PCWA-C500 to communicate with the Wireless LAN Converter PCWA-DE30.

Connection example

z Hint The Wireless LAN Converter also allows computers equipped with Wireless LAN Converters to communicate directly when using the Peer to Peer Network connection mode, without using a Wireless LAN Access Point.

The Access Point Network connection mode settings are described in this document. Refer to Help for information about the Peer to Peer Network connection mode settings.

Configuring the Wireless LAN Converter with the Quick Setup switch

You can use the settings of the Sony Wireless Broadband Router PCWA-AR300 to automatically configure the hardwired (Ethernet) Wireless LAN Converter by using the Quick Setup switch. The Access Point sends the following to the Wireless LAN Converter.

Network Name (SSID)

Encryption key (WEP key)

Configuring the Wireless LAN Converter You can configure the Wireless LAN Converter by performing one of the following.

With the Quick Setup switch When the Wireless LAN Converter is connected to the Wireless Broadband Router PCWA-AR300, you can use the Quick Setup switch to configure the Wireless LAN Converter. For details, see Configuration with the Quick Setup Switch.

With the utility software When the Wireless LAN Converter is connected to an access point other than the PCWA-AR300, you cannot use the Quick Setup switch to configure the Wireless LAN Converter. For details, see Configuration with the Utility Software overleaf.

z Hint You can use the utility software to configure the Wireless LAN Converter even if it is connected to the PCWA-AR300.

z Hint In this document, each procedure is preceded by a box. Before proceeding to the next procedure, confirm that you performed all the necessary tasks by ticking the box.

Example:

Procedure 1

Procedure 4

Connect the Wireless LAN Converter to the device that you want to use for wireless communication

1 Connect the Wireless Unit and Power Unit.

2 Connect the Power Unit to the computer or other device capable of wireless communication using an Ethernet cable.

3 Connect the Power Unit to an AC outlet using the power cord.

z Hints The Wireless LAN Converter does not have a power switch.

You can use an Ethernet cable with straight-through or crossover wiring.

When the status indicator of the Wireless LAN Converter changes to white when you connect the wireless communication device, configuration is complete.

zHints If you change the Access Point settings, see If You Change the Access Point Settings, overleaf.

If you want to reset the Wireless LAN Converter, see Reset to Factory Defaults, overleaf.

For details about the Wireless LAN Converter setup, refer to the Help.

To display Help

Click the Start button, point to Programs (when using the Windows XP operating system, point to All Programs), point to Wireless LAN, and then click Converter Setup Help.

To display Help for the Wireless LAN Converter Setup Page

Click or on the Wireless LAN Converter Setup Page.

PCWA-DE30 Sony Corporation 2003 Printed in Japan

Sony, VAIO, , , and the Eco Info logo are trademarks of Sony Corporation.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

In this manual, Microsoft Windows Millennium Edition is referred to as Windows Me, Microsoft Windows 2000 Professional is referred to as Windows 2000, Microsoft Windows XP Home Edition and Microsoft Windows XP Professional are referred to as Windows XP.

Netscape is registered trademark of Netscape Communications Corporation.

All other names of systems, products and services are trademarks of their respective owners.

In the manual, the or marks are not specified.

Configuration with the Quick Setup Switch When the Wireless LAN Converter is connected to the PCWA-AR300, you can use the Quick Setup switch to configure it. When the Wireless LAN Converter is connected to another type of access point, see Configuration with the Utility Software overleaf.

Procedure 1

Complete the Access Point setup Refer to the documentation of your Access Point for details about how to complete the setup. If your Access Point data encryption (WEP) is not configured, we strongly suggest that you configure it before proceeding.

Procedure 2

Connect the PCWA-AR300

PCWA-AR300 1 Connect the Wireless Unit of the Wireless LAN Converter to a Wireless Unit/LAN connector of the

PCWA-AR300 Router Unit.

2 Connect the AC adapter to the PCWA-AR300 and the power outlet.

3 Press the power switch to turn on the AC adapter.

z Hint The connections above are used in configuring the Wireless LAN Converter with the Quick Setup switch. For details about connections to use the Wireless LAN Converter in wireless communication, see procedure 4.

Procedure 3

Perform Quick Setup

1 Wait until the PCWA-AR300, and the Wireless LAN Converter start.

2 Press the Quick Setup switch of the PCWA-AR300 Wireless Unit for at least one second. When the status indicator on the PCWA-AR300 starts flashing red, it is ready for quick setup.

z Hint The Wireless LAN Converter only remains in Quick Setup standby mode for 30 seconds.

Press the Quick Setup switch one more time for at least one second to cancel the procedure.

3 Press the Wireless LAN Converter Quick Setup switch for at least one second. When the Status indicator on the PCWA-AR300 stops flashing red and the Wireless LAN Converters begins flashing white, quick setup is complete.

4 Turn off the Wireless LAN Converter.

Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Wireless LAN Converter (IEEE 802.11g: 2.4 GHz/54 Mbps)

Quick Start Guide Before reading this guide, be sure to read the Read This First supplement.

This guide provides an overview of the Wireless LAN Converter PCWA-DE30 features and the necessary configuration.

Router or similar

Access Point

Wireless LAN Converter

Internet

Wireless LAN Converter

Device equipped with an Ethernet connector

Wireless Unit of the Wireless Broadband Router PCWA-AR300 (PCWA-AR320)

Wireless Unit of the Wireless LAN Converter PCWA-DE30

Router Unit of the Wireless Broadband Router PCWA-AR300 (PCWA-R1)

Power switch

AC adapter

Quick Setup switch

Power cord

Wireless Unit cable

Wireless Unit Ethernet cable (not included)

Power Unit

or

Configuration with the Utility Software Procedure 1

Verifying the computer used for setup and the Access Point, and configuring necessary settings

Before starting setup of the Wireless LAN Converter with the Converter Setup Utility, verify the following points.

Verify the Ethernet connector of computer used for setup Verify the Ethernet connector of the computer to be used for setup and provide the required Ethernet cable.

z Hint You can use an Ethernet cable with straight-through or crossover wiring.

Verify the Access Point Make sure that the 2.4 GHz Wireless LAN Access Point to be used is on. Also verify the Network Name (SSID) and Encryption (WEP) key settings of the Access Point.

Network Name (SSID) : ___________________

Encryption (WEP) key : ___________________

If your Access Point data encryption (WEP) is not configured, we strongly suggest that you configure it before proceeding.

Adjust the firewall settings of your computer If you are using the Windows XP Internet Connection Firewall function or a personal firewall provided by virus scanning software, it may be necessary to adjust its security level. For details, see below.

Note Computer Firewall Functions When using the Windows XP Internet Connection Firewall function Enabling the Windows XP Internet Connection Firewall function may prevent you from accessing your computer through wireless communication. (With the Windows XP operating system, this function is disabled by default.) Because of this, you may not be able to connect to your network when you change your Wireless LAN Converter and/or Access Point settings. If this happens, disable the Internet Connection Firewall function, connect to the network, and then reactivate the function. For details, refer to Windows XP Help.

Note

Network security is an important issue. You are urged to consider carefully how best to protect your computer.

When using a personal firewall provided by virus scanning or network security software Virus scanning and network security software sometimes includes a function called a personal firewall that is designed to prevent illegal access by outside entities. Depending on the software, the security level of this function may be initially set to a high level. If this high security level setting is left in effect, it may be impossible for an outside entity to access your computer. This can cause problems such as not being able to connect to the network when changing the Wireless LAN Converter or Access Point settings. In this event, lower the security level in order to allow network connection. For details, refer to the manuals provided with your software.

Notes

Network security is an important issue. You are urged to consider carefully how best to protect your computer.

For details about firewall functions or other inquiries, contact your software manufacturer.

Procedure 2

Connecting the Wireless LAN Converter to the computer used for setup

Connect the Wireless LAN Converter and the computer.

zHint For details about how to connect the device that you want to use for wireless communication, see Configuration with the Quick Setup Switch, procedure 4.

Procedure 3

Installing the utility software Install the utility software to configure the Wireless LAN Converter (Converter Setup Utility) on the computer used for setup.

1 Insert the supplied CD-ROM into the CD-ROM drive of the computer where the Wireless LAN Converter is connected.

2 With computers running the Windows Me or Windows 2000 operating system, double-click the My Computer icon on your desktop. With computers running the Windows XP operating system, click Start and click My Computer.

3 In the My Computer window, double-click Setup.exe on the supplied CD-ROM. The installation program starts. Follow the instructions on the screen and install the utility software.

z Hints Depending on the settings of your computer, the file name Setup.exe may be displayed as Setup. If there are

multiple files named Setup in the same folder, double-click the one with the following icon.

To exit the installation program, click Cancel.

Procedure 4

Configuring the Wireless LAN Converter Display the Wireless LAN Converter Setup Page and configure the necessary settings.

Compatible browsers: Internet Explorer 5.5 or later Netscape 6.1 or later

Notes

To display the Wireless LAN Converter Setup Page with the Converter Setup Utility software, use one of the Web browsers above.

If your Web browser is configured to use a proxy server, set the browser proxy settings so that the browser does not use a proxy sever for the IP address of the Wireless LAN Converter and the 2.4 GHz Wireless LAN devices such as the Access Point. For details about how to disable proxy settings, see Case 4: Cannot display the Wireless LAN Converter Setup Page with the Converter Setup Utility in the Troubleshooting Guide.

z Hints The Wireless LAN Converter Setup Page is saved in the internal memory of the Wireless LAN Converter.

The page displayed may differ slightly depending on the firmware version of the Wireless LAN Converter.

1 Click Start, point to Programs (when using the Windows XP operating system, point to All Programs), point to Wireless LAN, and then click Converter Setup. The Converter Setup Utility starts and automatically displays the Wireless LAN Converter Setup Page.

z Hints If the IP Address Setup dialog box appears, temporarily change the converter IP address to the one in the dialog

box. However, if you are using several devices to build a network, make sure that the new IP address does not duplicate the address of another device or computer on the network. If it does, you will not be able to open the Wireless LAN Converter Setup Page. Change the IP address as necessary before clicking Execute Setup.

If an error occurs, refer to the Troubleshooting Guide or Help.

2 Click Easy Setup. The Easy Setup page appears.

3 Enter the Network Name (SSID) of the Access Point.

If the Access Point setup is complete: Use the same Network Name (SSID) as the one set for the Access Point.

If the Access Point setup is not complete: Refer to the documentation provided with your Access Point and enter the default Network Name (SSID).

Note The Network Name (SSID) is an identifier used to identify the wireless network. It is required for communication with the Access Point.

z Hint To search for active Access Points in the vicinity, click the Scan button.

4 Configure the Encryption (WEP), Key Length, and WEP Key settings.

If the Access Point setup is complete: Use the same values as the one set for the Access Point.

If the Access Point setup is not complete: Refer to the documentation of the Access Point and enter the default values.

Encryption (WEP) : Select whether to use data encryption or not. Key Length : Select the Encryption (WEP) key length. The number of characters for

the key string depends on this setting. WEP Key : Enter a character string to be used as the Encryption (WEP) key. The

length of the string must match the encryption key length setting. For verification, the string must be entered once more in the WEP Key (Confirmation) field.

z Hints Encryption of wireless communications data (as selected by Encryption (WEP)) is used to prevent unauthorized

access by a third party. The Encryption (WEP) key becomes the password necessary to join a network using data encryption.

Clicking or displays Help.

5 When setup is complete, click Next. The setup confirmation page appears.

6 Make sure that the settings are as desired, and click Execute Setup. The setup completion page appears.

When you click Execute Setup, the Wireless LAN Converter restarts. If the status indicator on the front panel of the Wireless Unit flashes slowly white, communication with the Access Point is established.

Note If the read-in condition continues after you click Execute Setup, check the status indicator on the front panel of the Wireless Unit. If the indicator flashes slowly white, setup is complete and wireless communication is possible.

z Hint If the status indicator flashes red, communication with the Access Point cannot be established. Refer to Read This First or Help.

7 Close the Web browser.

Procedure 5

Connecting to a device equipped with Ethernet connector

This procedure is unnecessary if you plan to perform wireless communications with the computer used for setup. If not, disconnect the Wireless LAN Converter from the computer used for setup and connect it to the wireless communication device.

Note

If you disconnect the Ethernet cable from the computer used for setup while it is still on, wait at least 10 seconds before connecting it to the wireless communication device.

If You Change the Access Point Settings If you change the settings of your Access Point, the connection to the Wireless LAN Converter is severed. Reconfigure the Network Name (SSID) and Encryption key (WEP key) of the Wireless LAN Converter to match the values of your Access Point. If the Wireless LAN Converter is connected to the PCWA-AR300, perform procedures 2 and 3 of Configuration with the Quick Setup Switch, overleaf. If the Wireless LAN Converter is connected to a device other than the PCWA-AR300, see Configuration with the Utility Software, overleaf.

Reset to Factory Defaults 1 Turn on the Wireless LAN Converter.

2 Press the reset switch on the bottom of the Wireless Unit with the end of a paper clip or a similar object for at least one second.

3 When the status indicator begins flashing red, release the reset switch. The Wireless LAN Converter restarts automatically, and all settings revert to their factory default values.

For details about the factory default settings of the Wireless LAN Converter, refer to the Troubleshooting Guide.

For more about the following, refer to Read This First. Names of parts and functions

Installation precautions

Operating precautions

Specifications

Click in Step 2.

Enter the Network Name (SSID) of your Access Point.

Configure these settings to match those of your Access Point.

Device equipped with an Ethernet connector

Manualsnet FAQs

If you want to find out how the PCWA-DE30 Sony works, you can view and download the Sony PCWA-DE30 Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Sony PCWA-DE30 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Sony PCWA-DE30. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony PCWA-DE30 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony PCWA-DE30 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony PCWA-DE30 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony PCWA-DE30 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony PCWA-DE30 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.