Sony VGP-PRSR1 Operating Instructions PDF

English

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Use your product only with the AC adapter and power cord supplied with your computer.

To disconnect it completely from the main voltage, unplug the AC adapter. The socket-outlet shall be installed near the equipment and shall be easily

accessible.

For customers in the USA

Owners Record The model number and serial number are located on the bottom of your docking station. Record the serial number in the space provided here. Refer to the model and serial number when you call your Sony Service Center. Model No. VGP-PRSR1 Serial No. ___________________

WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

2008 Sony Corporation / Printed in China

Docking Station VGP-PRSR1

Operating Instructions / Mode demploi / Manual de instrucciones / Manual de instrues /

4-105-594-11(1)

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits, may be attached to this computer product. Operation with non- compliant peripherals is likely to result in interference to radio and television reception.

All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.

If you have any questions about this product, you can reach the Sony Customer Infomation Service Center at 1-888-476-6972 in the United States or 1-800-961-7669 in Canada; or write to the Sony Customer Information Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony Customer Service on the Web at http://www.sony.com/pcsupport.

Declaration of Conformity Trade Name: SONY Model No.: VGP-PRSR1 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A. Telephone No.: 858-942-2230 (This phone number is for FCC-related matters only.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For customers in Canada This Class B digital apparatus complies with Canadian ICES-003.

VAIO is a trademark of Sony Corporation. ATI Mobility Radeon is a trademark of Advanced Micro Devices, Inc.

Before use Before using the docking station, please read this manual thoroughly and retain it for future reference. See also the manuals provided with your computer for more information about connecting the docking station. The Sony VGP-PRSR1 docking station is designed for Sony personal computers. However, it may not be used with some models.

Specifications Connectors Docking station connector : Custom connector (1)

USB : Type-A connector (3) *1

External display output : MONITOR (a) : Analog RGB (mini D-sub 15 pin) (1) DVI-D ( ) : Digital (DVI-D type) (1)*2

LAN connector : LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1

Power requirement (AC adapter *3) Input: 100 - 240 V AC, 1.5 A, 50/60 Hz (AC power cord supplied with your computer.) Output: 19.5 V DC, 4.7 A

Operating temperature 41F to 95F (5C to 35C) (temperature gradient less than 18F (10C)/hour)

Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95F (35C) (hygrometer reading of less than 84F (29C))

Storage temperature 4F to +140F (20C to +60C) (temperature gradient less than 18F (10C)/hour)

Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140F (60C) (hygrometer reading of less than 95F (35C))

Dimensions Approx. 13.2 (w) 1.7 (h) 5.5 (d) inches (Approx. 334 42.1 138.6 mm)

Mass Approx. 46.6 oz. (1.32 kg) Supplied accessories

Warranty (1) Operating instructions (1)

*1 The specifications are the same as those of the computer you are using. For details, refer to the manuals provided with your computer.

*2 The DVI-D port is available only on models with the ATI Mobility RadeonTM

Graphics Media Accelerator. *3 Use your product only with the AC adapter and power cord supplied with your

computer.

Design and specifications are subject to change without notice.

Notes on use Use your product only with the AC adapter and power cord supplied with your

computer. To disconnect the unit completely from the main voltage, unplug the AC adapter. Make sure that the socket outlet is easily accessible. Do not place the unit in locations that are:

Extremely hot or cold Dusty or dirty Very humid Vibrating Subject to strong magnetic fields Sandy Subject to direct sunlight

Do not apply mechanical shock or drop the unit. Make sure that nothing metallic comes into contact with the metal parts of the unit.

If this happens, a short-circuit may occur and the unit may be damaged. Do not operate the unit with a damaged cord. Do not operate the unit if the unit itself has been dropped or damaged. Always keep the metal contacts clean. Do not disassemble or convert the unit. While in use, it is normal for the unit to get warm. Keep the unit away from TV or AM receivers, because it can disturb TV or AM

reception. USB, i.LINK, PC-card slot, Printer, DVI-D and MONITOR are not supplied with

Limited Power Sources if those connectors are provided. When connecting or disconnecting the unit, handle it carefully. When transporting the unit, prevent foreign objects from causing a malfunction by

using the battery pack, the connector covers and the supplied slot protectors if there is any.

When transporting your computer, be sure to remove the unit first. Moving your computer with the unit installed could cause the unit to fall off, resulting in personal injury, or damage to the unit or your computer.

If there are any dust or dirt particles on the docking station connector, your computer may not be able to detect the docking station when it is connected (even if the particles are invisible to the eye). If the connection seems to be poor, remove the AC power adapter and battery, and wipe off the connector and the area around it on both the computer and the unit. Commercial air dusters are also effective for blowing away residual dust and dirt. Be careful not to damage the connectors while cleaning them.

On cleaning Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

Franais

AVERTISSEMENT

Afin de rduire les risques dincendie ou de choc lectrique, nexposez pas cet appareil la pluie ni lhumidit.

Pour prvenir tout risque dlectrocution, nouvrez pas le botier. Confiez lentretien exclusivement au personnel qualifi.

Nutilisez votre produit quavec ladaptateur CA et le cordon dalimentation fournis avec votre ordinateur.

Pour dconnecter compltement votre ordinateur de la prise de courant, dbranchez ladaptateur CA.

La prise secteur doit tre installe proximit de lquipement et doit tre aisment accessible.

Pour les utilisateurs au Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

VAIO est une marque de Sony Corporation. ATI Mobility RadeonMC est une marque de commerce de Advanced Micro Devices, Inc.

Avant utilisation Avant dutiliser la station daccueil, veuillez lire attentivement ce manuel et conservez- le pour toute rfrence ultrieure. Pour obtenir davantage dinformations sur le raccordement de la station daccueil, reportez-vous aux manuels fournis avec votre ordinateur. La station daccueil VGP-PRSR1 de Sony est conue pour les ordinateurs personnels Sony. Il se peut toutefois quelle ne puisse pas tre utilise avec certains modles.

Spcifications Connecteurs Connecteur de la station daccueil : Connecteur spcial (1)

USB : Connecteur de type A (3) *1

Sortie cran externe : MONITEUR (a) : RVB analogique (mini D-Sub 15 broches) (1) DVI-D ( ) : Numrique (type DVI-D) (1)*2

Connecteur LAN : LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1

Puissance requise (Adaptateur CA *3) Entre: 100 - 240 V CA, 1,5 A, 50/60 Hz (Cble dalimentation fourni avec votre ordinateur.) Sortie: 19,5 V CC, 4,7 A

Temprature de fonctionnement 5C 35C (41F 95F) (gradient de temprature infrieur 10C (18F)/heure)

Humidit de fonctionnement 20% 80% (sans condensation), condition que le taux dhumidit soit infrieur 65% pour une temprature de 35C (95F) (lecture hygromtrique moins de 29C (84F))

Temprature de rangement 20C +60C (4F +140F) (gradient de temprature infrieur 10C (18F)/heure)

Humidit de rangement 10% 90% (sans condensation), condition que le taux dhumidit soit infrieur 20% pour une temprature de 60C (140F) (lecture hygromtrique moins 35C (95F))

Dimensions Env. 334 (l) 42,1 (h) 138,6 (p) mm (Env. 13,2 1,7 5,5 pouces)

Poids Env. 1,32 kg (46,6 oz) Accessoires fournis

Garantie (1) Mode demploi (1)

*1 Les spcifications sont les mmes que celles de lordinateur que vous utilisez. Pour plus de dtails, reportez-vous aux manuels fournis avec votre ordinateur.

*2 Le port DVI-D est disponible uniquement sur les modles offrant lacclrateur graphique ATI Mobility RadeonTM Graphics Media Accelerator.

*3 Nutilisez votre produit quavec ladaptateur CA et le cordon dalimentation fournis avec votre ordinateur.

La conception et les spcifications sont sujettes modifications sans pravis.

Remarques sur lutilisation Nutilisez votre produit quavec ladaptateur CA et le cordon dalimentation

fournis avec votre ordinateur. Pour dconnecter compltement lappareil de la prise de courant, dbranchez

ladaptateur CA. Assurez-vous que la prise de courant soit facilement accessible. Ne placez pas lappareil dans des endroits :

extrmement chauds ou froids ; poussireux ou sales ; trs humides ; soumis des vibrations ; soumis de puissants champs magntiques ; sablonneux ; exposs au rayonnement direct du soleil.

Ne soumettez pas lappareil des chocs mcaniques et ne le laissez pas tomber. Veillez ce quaucun objet mtallique nentre en contact avec les parties

mtalliques de cet appareil. Si cela se produit, un court-circuit risque de survenir et dendommager lappareil.

Ne faites pas fonctionner lappareil avec un cble endommag. Ne faites pas fonctionner lappareil sil est tomb ou a subi des dommages. Veillez ce que les contacts mtalliques restent toujours propres. Ne dmontez pas et ne transformez pas lappareil. Le systme chauffe en cours dutilisation. Ceci na rien danormal. Gardez lappareil lcart des tlviseurs et des rcepteurs AM car il peut causer

des interfrences dans la rception tlvise ou radiophonique. Les connecteurs USB, i.LINK, PC Card, Imprimante, DVI-D et MONITOR ne sont

pas offerts avec Limited Power Sources, si ces connecteurs sont fournis. Lors du branchement ou du dbranchement de lappareil, manipulez-le avec soin. Lorsque vous transportez lappareil, empchez des corps trangers de provoquer

un dysfonctionnement en utilisant la batterie, les caches des connecteurs et les protecteurs de fente fournis, le cas chant.

Lorsque vous transportez votre ordinateur, veillez retirer lappareil au pralable. Si vous dplacez votre ordinateur et que lappareil est install, lappareil risque de tomber. Ceci peut entraner des blessures ou endommager lappareil ou votre ordinateur.

Sil y a de la poussire ou des particules de salet sur le connecteur de la station daccueil, votre ordinateur risque de ne pas pouvoir dtecter la station daccueil lorsquelle est raccorde (mme si les particules sont invisibles lil nu). Si vous pensez que le raccordement est mauvais, retirez lAdaptateur CA et la batterie, puis nettoyez le connecteur ainsi que la zone environnante de lordinateur et de lappareil. Les souffleurs disponibles dans le commerce sont galement efficaces pour faire partir les rsidus de poussire et de salet. Prenez garde de ne pas endommager les connecteurs lors de leur nettoyage.

Entretien Nettoyez lappareil au moyen dun chiffon sec et doux, ou lgrement imprgn dune solution dtergente neutre. Nutilisez aucun type de solvant, comme de lalcool ou de lessence, qui risquerait de ternir le fini de lappareil.

VAIO Sony Corporation

ATI Mobility Radeon Advanced Micro Devices, Inc.

Sony VGP-PRSR1Sony

(1) USB A (3)*1

MONITORaRGBD-sub 15)1 DVI-D DVI-D1*2

LAN LAN(10BASE-T/100BASE-TX/1000BASE-T)(1)*1

( *3) 100 - 240 V AC1.5 A50/60 Hz 19.5 V DC 4.7 A

5 35 10 / 20% 80%35 65%

29 -20 +60

10 / 10% 90%60 20%

35 334 42.1 138.6mm 1.32 kg

*1

*2 ATI Mobility RadeonTM DVI-D

*3

AMAM

Portugus

ADVERTNCIA

Para reduzir o risco de incndio ou choque eltrico, no deixe este aparelho exposto chuva ou umidade.

Para evitar choque eltrico, no abra o gabinete. Solicite apenas a assistncia de pessoal tcnico qualificado.

Use o produto apenas com o adaptador CA e o cabo de alimentao fornecido com o computador.

Para desconect-lo completamente da tenso principal, desplugue o adaptador CA.

A tomada deve ser instalada prximo ao equipamento e deve ser de fcil acesso.

VAIO uma marca comercial da Sony Corporation. ATI Mobility Radeon uma marca comercial da Advanced Micro Devices, Inc.

Antes de usar Antes de utilizar a docking station (base de expanso), leia este manual do incio ao fim e guarde-o para referncia futura. Consulte tambm os manuais fornecidos com o seu computador para obter mais informaes sobre a conexo da docking station. A docking station Sony VGP-PRSR1 foi projetada para computadores pessoais Sony. Entretanto, pode no ser utilizada com certos modelos.

Especificaes Conectores Conector da docking station: conector personalizado (1)

USB: conector do tipo A (3) *1

Sada do monitor externo: MONITOR (a): RGB analgico (mini D-sub de 15 pinos) (1) DVI-D ( ): Digital (tipo DVI-D) (1)*2

Conector de LAN: LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1

Requisito de energia (Adaptador CA *3) Entrada: 100 - 240 V CA, 1,5 A, 50/60 Hz (Cabo de energia CA fornecido com o computador.) Sada: 19,5 V CC, 4,7 A

Temperatura operacional 5C a 35C (41F a 95F) (gradiente de temperatura inferior a 10C (18F)/hora)

Umidade operacional De 20% a 80% (no-condensada), contanto que a umidade seja inferior a 65% a 35C (95F) (leitura de higrmetro inferior a 29C (84F))

Temperatura de armazenamento 20C a +60C (4F a +140F) (gradiente de temperatura inferior a 10C (18F)/hora)

Umidade de armazenamento De 10% a 90% (no-condensada), contanto que a umidade seja inferior a 20% a 60C (140F) (leitura de higrmetro inferior a 35C (95F))

Dimenses Cerca de 334 (l) 42,1 (a) 138,6 (p) mm (Cerca de 13,2 1,7 5,5 polegadas)

Massa Cerca de 1,32 kg (46.6 oz.) Acessrios fornecidos

Garantia (1) Manual de instrues (1)

*1 As especificaes so as mesmas das do computador que voc est usando. Para obter detalhes, consulte os manuais fornecidos com o seu computador.

*2 A porta DVI-D somente est disponvel em modelos com o acelerador de mdia grfica ATI Mobility RadeonTM.

*3 Use o produto apenas com o adaptador CA e o cabo de alimentao fornecido com o computador.

O projeto e as especificaes esto sujeitos a alteraes sem aviso prvio.

Observaes sobre o uso Use o produto apenas com o adaptador CA e o cabo de alimentao fornecido com

o computador. Para desconectar a unidade completamente da tenso principal, desplugue o

adaptador CA. Certifique-se de que a tomada seja de fcil acesso. No coloque a unidade em locais que sejam:

Muito quentes ou frios Empoeirados ou sujos Muito midos Com vibrao Sujeitos a campos magnticos fortes Arenosos Sujeitos luz solar direta

No aplique choque mecnico ou deixe a unidade cair. Certifique-se de que nenhum objeto de metal entre em contato com as peas

metlicas da unidade. Caso isso acontea, pode ocorrer um curto-circuito e a unidade pode ser danificada.

No opere a unidade se o cabo estiver danificado. No opere a unidade se ela tiver sido derrubada ou se estiver danificada. Mantenha os contatos de metal sempre limpos. No desmonte ou adapte a unidade. Enquanto estiver em uso, normal que a unidade aquea. Mantenha a unidade longe de receptores de TV ou AM, pois ela pode causar

interferncia nos mesmos. Ao conectar ou desconectar a unidade, manuseie com cuidado. Ao transportar a unidade, evite que objetos externos causem mau funcionamento,

utilizando a bateria, as tampas dos conectores e os protetores do slot fornecidos, se houver.

Ao transportar o computador, certifique-se de remover a unidade primeiro. Mudar de lugar o computador com a unidade instalada pode fazer a unidade cair, o que pode resultar em ferimentos, danos unidade ou ao computador.

Se houver qualquer partcula de poeira ou sujeira no conector da docking station, o computador pode no conseguir detectar a docking station quando estiver conectada (mesmo que as partculas sejam invisveis a olho nu). Se a conexo parecer ruim, remova o adaptador de energia CA e a bateria, e limpe o conector e a rea ao seu redor no computador e na unidade. Equipamentos comerciais de ar comprimido tambm so eficazes para remover sujeira e poeira residuais. Tome cuidado para no danificar os conectores quando limp-los.

Limpeza Limpe a unidade com um pano macio e seco ou um pano macio levemente embebido com uma soluo detergente suave. No utilize nenhum tipo de solvente, como lcool ou benzina, que podem danificar o acabamento.

Espaol Nombre del producto: estacin de conexiones

Modelo: VGP-PRSR1

AVISO

Para reducir el riesgo de incendios o electrocucin, no exponga el aparato a la lluvia ni a la humedad.

Para evitar descargas elctricas, no abra el aparato. Solicite asistencia tcnica nicamente a personal especializado.

IMPORTANTE!

POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE EQUIPO. RECUERDE QUE UN MAL USO DE SU APARATO PODRA ANULAR LA GARANTA.

Utilice el producto nicamente con el adaptador de alimentacin de ca y el cable de alimentacin suministrados con la computadora.

Para desconectarlo totalmente de la corriente principal, desenchufe el adaptador de alimentacin de ca.

La toma de corriente debe estar situada cerca del equipo, en un lugar accesible.

VAIO es una marca comercial de Sony Corporation. ATI Mobility Radeon es una marca comercial de Advanced Micro Devices, Inc.

Antes del uso Antes de utilizar la estacin de conexiones, lea este manual detenidamente y consrvelo para consultarlo en el futuro. Asimismo, consulte los manuales suministrados con la computadora para obtener ms informacin sobre cmo conectar la estacin de conexiones. La estacin de conexiones VGP-PRSR1 de Sony est diseada para utilizarse con computadoras personales Sony. No obstante, es posible que no pueda utilizarse con algunos modelos.

Especificaciones Conectores Conector de la estacin de conexiones : Conector personalizado (1)

USB : Conector de tipo A (3) *1

Salida de pantalla externa : MONITOR (a) : RGB analgico (mini D-sub de 15 patillas) (1) DVI-D ( ) : digital (tipo DVI-D) (1)*2

Conector LAN : LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1

Requisitos de alimentacin (Adaptador de alimentacin de ca *3) Entrada: ca 100 - 240 V, 1,5 A 50/60 Hz (cable de alimentacin de ca suministrado con la computadora). Salida: cc 19,5 V, 4,7 A

Temperatura de funcionamiento 5C a 35C (41F a 95F) (cambios de temperatura inferiores a 10C (18F)/hora)

Humedad de funcionamiento 20% a 80% (sin condensacin), siempre que la humedad sea inferior al 65% a 35C (95F) (lectura de higrmetro inferior a 29C (84F))

Temperatura de almacenamiento 20C a +60C (4F a +140F) (cambios de temperatura inferiores a 10C (18F)/hora)

Humedad de almacenamiento 10% a 90% (sin condensacin), siempre que la humedad sea inferior al 20% a 60C (140F) (lectura de higrmetro inferior a 35C (95F))

Dimensiones Aprox. 334 (an) 42,1 (al) 138,6 (pr) mm (Aprox. 13,2 1,7 5,5 pulgadas)

Peso Aprox. 1,32 kg (46,6 oz.) Accesorios suministrados

Garanta (1) Manual de instrucciones (1)

*1 Las especificaciones son iguales a las de la computadora que est utilizando. Para obtener ms informacin, consulte los manuales suministrados con la computadora.

*2 El puerto DVI-D slo se encuentra disponible en modelos con tarjeta grfica ATI Mobility RadeonTM Graphics Media Accelerator.

*3 Utilice el producto nicamente con el adaptador de alimentacin de ca (VGP- AC19V25) y el cable de alimentacin suministrados con la computadora.

El diseo y las especificaciones estn sujetas a cambios sin previo aviso.

Notas sobre el uso Utilice el producto nicamente con el adaptador de alimentacin de ca y el cable de

alimentacin suministrados con la computadora. Para desconectar totalmente la unidad de la corriente principal, desenchufe el

adaptador de alimentacin de ca. Asegrese de que el tomacorriente es de fcil acceso. No coloque la unidad en lugares:

extremadamente clidos o fros polvorientos o sucios muy hmedos con vibracin con fuertes campos electromagnticos arenosos expuestos a la luz solar directa

No golpee ni deje caer la unidad. Asegrese de que ningn objeto metlico entre en contacto con las partes metlicas

de la unidad, ya que podra producirse un cortocircuito y la unidad podra daarse.

No utilice la unidad con un cable daado. No utilice la unidad si se ha cado o daado. Mantenga siempre limpios los contactos metlicos. No desmonte ni modifique la unidad. Durante el uso, es normal que la unidad se caliente. Mantenga la unidad alejada de los receptores de TV o AM, ya que pueden

dificultar la recepcin. Al conectar o desconectar la unidad, manjela con cuidado. Cuando transporte la unidad, utilice la batera, las cubiertas de los conectores y los

protectores de las ranuras (si los hubiera) suministrados para evitar que algn objeto extrao provoque una falla de funcionamiento.

No olvide extraer la unidad cuando vaya a transportar la computadora. Si no lo hace, la unidad podra caerse y causar daos personales o daos en la unidad o en la computadora.

Si hay alguna partcula de polvo o suciedad en el conector de la estacin de conexiones, es posible que la computadora no detecte la conexin con sta (incluso si las partculas son tan pequeas que ni siquiera se ven). Si la conexin no es adecuada, desconecte el adaptador de alimentacin de ca y la batera, limpie el conector y la regin de su alrededor en la computadora y en la unidad. Los pulverizadores de aire que existen en el