Sony AC-VQ1051D Operating Instructions v2 PDF

1 of 1
1 of 1

Summary of Content for Sony AC-VQ1051D Operating Instructions v2 PDF

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Notes on Use This unit does not have dust-proof, splash-proof or waterproof specifications.

Warranty for Recorded Content Contents of the recording cannot be compensated if recording or playback is not made due to a malfunction of the battery pack, AC Power Adaptor, AC Power Adaptor/Charger, etc.

Charging Designed for use with genuine Sony battery packs. Only charge recommended battery packs with this unit. Attach the battery pack firmly.

Charging temperature To provide maximum battery efficiency, the recommended temperature range when charging is 10 C to 30 C (50 F to 86 F). Charging becomes more difficult at lower temperatures. This unit provides quick charging, but charging outside the recommended temperature range leads to longer charging times in order to protect the battery pack. Once the charging time has been extended, it will not return to quick charging even if the temperature is brought within the recommended temperature range. Reattach the battery pack and then charge it again.

Where not to put this unit Do not put this unit in any of the following places, whether it is in use or in storage. Doing so may lead to a malfunction.

Where it gets extremely hot Near a heater or in direct sunlight such as on a dashboard. The interior of cars gets particularly hot if the windows are shut during summer or on a sweltering day. This unit may become deformed or malfunction.

Where there is excessive vibration Where there is strong magnetism or radiation Where there is excessive sand or dust

Protect this unit from sand and dust in places such as the seashore and other sandy areas or where dust clouds occur, as there is risk of malfunction.

Precautions on Use Do not use the unit placed in a narrow space, such as between a wall and furniture. A negligible amount of electric current will flow into this unit as long as it is plugged into a wall outlet. The nameplate indicating operating voltage, power consumption, etc. is located on the bottom. Attach the battery pack firmly to this unit when charging the battery pack. Do not use this unit where there are strong radio waves or radiation. Video cameras etc. may not be able to record or play back correctly. Do not drop or otherwise cause shock to this unit. Keep this unit away from TVs, AM receivers and other tuners. They may be affected by interference if placed nearby. Use the nearby wall outlet (wall socket) when using this unit. Even if the CHARGE lamp of this unit is off, the power is still connected. If some trouble occurs while using this unit, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). Be sure that nothing metallic comes into contact with the metal parts of this unit or connecting cord. If it does, a short may occur and this unit may be damaged. Do not connect this unit to a voltage adaptor for overseas travel. This may result in overheating or some other malfunction. Unplug this unit from the wall outlet after use. To disconnect the cord, pull it out by the plug. Never pull the cord itself. Do not place objects filled with liquids, such as vases, on this unit. This unit or the battery pack may get warm during or immediately after charging. This is not a malfunction. Remove the battery pack from this unit when charging is complete. Keeping the battery pack attached may decrease the battery life.

Using the car battery cord (DCC-VQ1) Only use this unit with a car that has a 12 volt or 24 volt battery. Some cars are negatively grounded and others are positively grounded. This unit is for negatively grounded cars only. Use the unit with the car engine running. If you use the unit with the car engine stopped, the car battery may go flat. Unplug the car battery cord from the cigarette lighter socket when not in use. To disconnect the cord, pull it out by the plug. Never pull the cord itself.

Maintenance If this unit gets dirty, wipe it using a soft, dry cloth or tissue. If this unit gets very dirty, wipe it using a well-wrung soft cloth dipped in a diluted neutral solvent, and then finish it with a dry cloth. Do not use thinners, benzine, alcohol, etc., as they may cause deterioration or damage to the surface of this unit. When using a chemical cleaning cloth, refer to its instruction manual. Spraying with a volatile solvent such as an insecticide or prolonged contact with rubber or vinyl may cause deterioration or damage to this unit.

Identifying the parts Terminal shutter Slot DC IN connector

(only for DCC-VQ1) DC OUT connector CHARGE lamp Slot CHARGE lamp Output change switch Charging mode change switch Display window Slot indicator lamp DISPLAY change button

Display window InfoLITHIUM indicator WAITING indicator WARNING indicator TIME TO CHG (charge) indicator Time/LOG indicator BATTERY LIFE indicator VCR/CAMERA indicator Normal charge indicator Full charge indicator Battery life indicator

The AC-VQ1051D AC Adaptor/Charger can be used as follows The AC-VQ1051D AC Adaptor/Charger can be used in your home or car. Connect the power cord (supplied) to a wall outlet, or connect the car battery cord DCC-VQ1 to the cigarette lighter socket in your car. (For negative (-) grounded vehicles only.)

For operating Sony equipment (video cameras, etc.,) use the connecting cords included with this unit. For charging Sony rechargeable battery packs (L series).

You can set the level of charge completion to Full charge or Normal charge with the charging mode change switch. If you want to use the battery pack quickly, set to Normal charge to complete charging in the normal charged state.

When InfoLITHIUM battery packs are attached to this unit, the following functions are available.

Quick charging (Faster than charging with your video camera, etc.) BATTERY LOG and charging information can be displayed. Usage history and charging status of the battery pack is displayed.

Total charging time, charge count, last use year and month Battery life, remaining time until charging is complete

This unit is for charging lithium ion battery packs. It cannot be used to recharge Ni-Cd or Ni-MH batteries. This unit cannot be used with some model video cameras or other equipment. Confirm the compatibility of your equipment before use.

What is InfoLITHIUM? InfoLITHIUM is a lithium ion battery pack which can exchange data on battery consumption with compatible electronic equipment. We recommend that you use an InfoLITHIUM battery pack (L series) with electronic equipment that has the

mark.

InfoLITHIUM is a trademark of Sony Corporation. What is BATTERY LOG? BATTERY LOG displays the usage history it recorded in the battery pack.

Total charging time Charge count Last use year and month (Displays are approximate. Depending on the battery pack, the contents of the display are limited.)

Notes on the BATTERY LIFE indicator (Read carefully before use) While charging the battery pack, this unit shows the status of charging and information of the battery pack so long as the following conditions are met.

You are using an InfoLITHIUM battery pack. Your video camera, etc. is compatible with InfoLITHIUM.

Check that your battery pack has the mark. Check in the operating instructions supplied with your video equipment whether it is InfoLITHIUM compatible. If you use the battery pack with more than one video camera, etc. that is compatible with InfoLITHIUM, information is shown for the equipment last attached to the battery pack. BATTERY LOG is available with the rechargeable battery packs NP-F970, NP- F770 and NP-F570. Other battery packs may not be compatible or may display limited information.

4-289-309-11(1)

Operating Instructions Mode demploi

AC Adaptor/Charger Adaptateur/Chargeur CA

2011 Sony Corporation Printed in China

AC-VQ1051D

To Operate Video Equipment When the AC power cord and car battery cord DCC-VQ1 are connected at the same time, power input from the car battery cord is given priority. For details of connection, refer to the operating instructions of the video camera etc. 1 Set the output change switch to VCR/CAMERA. 2 Connect the AC power cord or car battery cord to this unit. 3 Connect the AC power cord to a wall outlet, or connect the car

battery cord to the cigarette lighter socket. There is a beep and the display window comes on.

4 Connect the connecting cord to the DC OUT connector of this unit. 5 Connect the connecting cord to the video camera.

For the direction in which to fit the connecting cord, refer to the operating instructions of video camera, etc. When using the connecting cord DK-215 (Illustration -) When using the connecting cord DK-415 (Illustration -)

Notes Setting the output change switch to CHARGE while operating the video camera, etc. cuts the power supply to the video camera. You cannot charge a battery pack attached to this unit when this unit is in VCR/ CAMERA mode. Move this unit away from your video camera, etc. if the image is distorted. The connecting cord DK-415 can be used with equipment compatible with the rechargeable battery pack (L series). Confirm the compatibility of your equipment before use. The illustration shows connection to an HDR-AX2000 digital HD video camera recorder.

To Charge the Battery Pack When the AC power cord and car battery cord DCC-VQ1 are connected at the same time, power input from the car battery cord is given priority. 1 Set the charging mode change switch to NORMAL CHARGE or FULL

CHARGE. If you want to charge the battery pack until full charging is complete, set the charging mode change switch to FULL CHARGE. If you want to finish charging when normal charging is complete, set it to NORMAL CHARGE. For details, refer to Switching the charging mode.

2 Set the output change switch to CHARGE. 3 Connect the AC power cord or car battery cord to this unit. 4 Connect the AC power cord to a wall outlet, or connect the car

battery cord to the cigarette lighter socket. There is a beep and the display window comes on.

5 Attach the battery pack. Refer to To attach the battery pack. When charging starts, the battery life indicator in the display window blinks in sequence and the CHARGE lamp lights up.

6 When charging is complete, remove the battery pack. This unit finishes charging on the charging level that you set with the charging mode change switch. When the CHARGE lamp turns off, charging is complete. For details about charge completion, refer to Switching the charging mode. Refer to To remove the battery pack when removing the battery pack.

Switching the charging mode There are two levels of charge completion: Normal charge and Full charge. You can change the charging mode with the charging mode change switch on this unit.

NORMAL CHARGE

When charge is completed, the battery life indicator is displayed as illustrated on the right. The condition of the battery pack can be better maintained, but the battery life will be slightly shorter than when in the full charged state.

FULL CHARGE

When charging is complete in the full charged state, the battery life indicator is displayed as illustrated on the right. The battery life will be slightly longer than when in the normal charged state, but the charging time will also be longer.

Attaching two battery packs simultaneously You can attach two battery packs in this unit at the same time. You can charge just one battery pack as well. Charging starts with the battery pack installed in Slot . When two battery packs are attached but not simultaneously, charging starts with the battery pack attached first regardless of whether it is in Slot or . Notes

Two battery backs can be attached, but they cannot be charged at normal charging simultaneously. When the charging mode change switch is set to FULL CHARGE, this unit completes normal charging in the order that the battery packs were attached and then completes full charging for both battery packs simultaneously.

To attach the battery pack (-) Place the battery pack on this unit with the mark facing the terminal

shutter. Slide the battery pack in the direction of the arrow.

Press the battery pack until the terminal shutter is completely concealed.

To remove the battery pack (-) Slide the battery pack in the direction of the arrow and lift it straight out.

Notes Do not pick this unit up by holding the battery pack. Be sure not to hit the terminal shutter. When attaching the battery pack, be particularly careful not to hit the battery pack against it. Be careful not to pinch your fingers while attaching or removing the battery pack.

Charging time Quick Charge

NP-F970 NP-F770 NP-F570

Normal charge 285 min 185 min 110 min

Full charge 345 min 245 min 170 min

The times shown are for charging an empty battery pack, using this unit at an ambient temperature of 25 C (77 F). The charging time may differ depending on the condition of the battery pack and the ambient temperature.

To use the battery pack quickly You can use the battery pack even if you remove it from this unit before charging is completed. However, a shorter charging time means a shorter useable time. Notes

If the output change switch is set to VCR/CAMERA during charging, charging stops. If the CHARGE lamp does not light up or blink, check that the battery pack is correctly attached to this unit. If it is not correctly attached, it will not be charged. Quick charging is only performed with InfoLITHIUM battery packs. When the charging mode change switch is set to NORMAL CHARGE, this unit finishes charging when normal charging is complete. You can change the charging mode before each charging is complete.

If anything goes wrong during charging, the CHARGE lamp blinks and WARNING appears on the display. For details, see Troubleshooting.

To Check Charging When charging starts, the battery life lights up in the display window. The battery life displayed is the approximate time remaining for recording images using the viewfinder. The battery life is shorter if the LCD display is used. The battery life may not be displayed with certain video cameras. For details, refer to Notes on the BATTERY LIFE indicator. There are two methods of switching the contents of the display window during charging. There are two methods of switching the contents of the display window: display changing automatically and display changing each time you press the DISPLAY change button. The slot indicator lamp corresponds to the slot number. Following is an example of installing a battery pack in Slot followed by another in Slot .

Changing the contents of the display window automatically during charging (See illustration ) Battery life

The battery life of the first attached battery pack. This is the battery life when attached to the InfoLITHIUM compatible video camera, etc. last used.

Battery life The battery life of the subsequently attached battery pack.

Charging time The total remaining time until full charging of the battery packs installed in Slot and Slot is complete. When the charging mode change switch is set to NORMAL CHARGE, the remaining time until normal charging is complete is displayed.

Press the DISPLAY change button during charging. (See illustration ) During charging, BATTERY LOG can be displayed by pressing the DISPLAY change button. The contents of the display window change each time you press the DISPLAY change button as follows. About five seconds after pressing the DISPLAY change button, battery life is displayed and then this automatically switches between the battery life and the remaining time until charging is complete. Total charging time

The total charging time of the first attached battery pack. Displays the approximate total charging time from first charging. The minimum displayed is 5 hours.

Total charge count The number of times the first attached battery pack has been charged. Displays the approximate number of times the battery pack has been charged since its first charging. The minimum displayed is 5 times, and the count is displayed in multiples of five. Top-up charges and suspended charges may not be counted.

Thank you for purchasing the Sony AC Adaptor/Charger.

Before operating the unit, please read this manual thoroughly and retain it for future reference.

Owners Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. AC-VQ1051D Serial No.

WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. To reduce the risk of fire or electric shock, 1) do not expose the unit to rain or moisture. 2) do not place objects filled with liquids, such as vases, on the apparatus. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The AC Power cord must only be changed at a qualified service shop.

CAUTION Replace the battery with the specified type only. Otherwise, fire or injury may result.

PRECAUTION The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off.

NOTICE FOR THE CUSTOMERS IN THE U.S.A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

NOTICE FOR THE CUSTOMERS IN THE U.S.A. AND CANADA

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

Battery to be recharged for this product is follows

Brand Name Sony Battery Type NP-F570 NP-F770 NP-F970 Rating (Typical Capacity)

DC 7.2 V 15.8 Wh

(2,200 mAh)

DC 7.2 V 31.7 Wh

(4,400 mAh)

DC 7.2 V 47.5 Wh

(6,600 mAh)

Representative plug of power supply cord of countries/regions around the world.

A type (American Type)

B type (British Type)

BF type (British Type)

B3 type (British Type)

C type (CEE Type)

SE type (CEE Type)

O type (Ocean Type)

The representative supply voltage and plug type are described in this chart. Depend on an area, Different type of plug and supply voltage are used.

Attention: Power cord meeting demands from each country shall be used.

For only the United States Use a UL Listed, 1.5-3 m (5-10 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for 125V 7A, with a NEMA 1-15P plug rated for 125V 15A.

Europe Countries/Regions Voltage Frequency (Hz) Plug type Austria 230 50 C Belgium 230 50 C Czech 220 50 C Denmark 230 50 C Finland 230 50 C France 230 50 C Germany 230 50 C Greece 220 50 C Hungary 220 50 C Iceland 230 50 C Ireland 230 50 C/BF Italy 220 50 C Luxemburg 230 50 C Netherlands 230 50 C Norway 230 50 C Poland 220 50 C Portugal 230 50 C Romania 220 50 C Russia 220 50 C Slovak 220 50 C Spain 127/230 50 C Sweden 230 50 C Switzerland 230 50 C UK 240 50 BF

Asia Countries/Regions Voltage Frequency (Hz) Plug type China 220 50 A Hong Kong 200/220 50 BF India 230/240 50 C Indonesia 127/230 50 C Japan 100 50/60 A Korea (rep) 220 60 C Malaysia 240 50 BF Philippines 220/230 60 A/C Singapore 230 50 BF Taiwan 110 60 A Thailand 220 50 C/BF Vietnam 220 50 A/C

Oceania Countries/Regions Voltage Frequency (Hz) Plug type Australia 240 50 O New Zealand 230/240 50 O

North America Countries/Regions Voltage Frequency (Hz) Plug type Canada 120 60 A USA 120 60 A

Central America Countries/Regions Voltage Frequency (Hz) Plug type Bahamas 120/240 60 A Costa Rica 110 60 A Cuba 110/220 60 A/C Dominican (rep) 110 60 A El Salvador 110 60 A Guatemala 120 60 A Honduras 110 60 A Jamaica 110 50 A Mexico 120/127 60 A Nicaragua 120/240 60 A Panama 110/220 60 A

South America Countries/Regions Voltage Frequency (Hz) Plug type Argentina 220 50 C/BF/O Brazil 127/220 60 A/C Chile 220 50 C Colombia 120 60 A Peru 220 60 A/C Venezuela 120 60 A

Middle East Countries/Regions Voltage Frequency (Hz) Plug type Iran 220 50 C/BF Iraq 220 50 C/BF Israel 230 50 C Saudi Arabia 127/220 50 A/C/BF Turkey 220 50 C UAE 240 50 C/BF

Africa Countries/Regions Voltage Frequency (Hz) Plug type Algeria 127/220 50 C Congo (dem) 220 50 C Egypt 220 50 C Ethiopia 220 50 C Kenya 240 50 C/BF Nigeria 230 50 C/BF South Africa 220/230 50 C/BF Tanzania 230 50 C/BF Tunisia 220 50 C

IMPORTANT SAFETY INSTRUCTIONS For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. 1 SAVE THESE INSTRUCTIONS This manual contains important safety and

operating instructions for battery charger. 2Before using battery charger, read all instructions and cautionary markings on

battery charger, battery, and product using battery. 3 CAUTION To reduce risk of injury, charge only designated Lithium-ion

type rechargeable batteries. Other types of batteries may burst causing injury to persons and damage.

4Do not expose charger to rain, moisture, or snow. 5Use of an attachment not recommended or sold by the battery charger

manufacturer may result in a risk of fi re, electric shock, or injury to persons. 6To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette

lighter connector rather than cord when disconnecting charger. 7Make sure cord is located so that it will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

For the Customers in Europe NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362 (i.e., marked with or

mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

2

4

3

1

3

2

4 DCC-VQ1

3

45 1 2

2

4 3 5

DCC-VQ1

1

2

Year and month of last use The year and month when the first attached battery pack was last used. Displays Month followed by Year (last two digits of the year). If used with a video camera that has no calendar set, -- -- is displayed.

Total charging time The total charging time of the subsequently attached battery pack.

Total charge count The number of times the subsequently attached battery pack has been charged.

Year and month of last use The year and month when the subsequently attached battery pack was last used.

Press the DISPLAY change button after charging is complete. (See illustration ) After charging is complete, the display does not change automatically. The contents of the display window change each time you press the DISPLAY change button as follows. About five seconds after pressing the DISPLAY change button, returns to the display shown in . Charging is complete. When the charging mode change switch is set

to NORMAL CHARGE, the battery life indicator shows NORMAL. Battery life

The battery life of the first attached battery pack. Battery life

The battery life of the subsequently attached battery pack. Total charging time

The total charging time of the first attached battery pack. Total charge count

The number of times the first attached battery pack has been charged. Year and month of last use

The year and month when the first attached battery pack was last used. Total charging time

The total charging time of the subsequently attached battery pack. Total charge count

The number of times the subsequently attached battery pack has been charged. Year and month of last use

The year and month when the subsequently attached battery pack was last used. Notes

The time display is an approximate time when charging at 25 C (77 F). It may differ from the actual time depending on the environment. Also, depending on the condition of the battery, a time may not be displayed. This is not a malfunction. It may take some time for the time to be displayed after starting the charging. The time display and remaining battery life of the battery pack on the side not being charged may take some time to appear. To display the battery life of a new battery pack, first attach it to your video camera and use it for about 20 seconds, and then charge it with this unit. If you attach a fully charged battery pack to this unit, TIME TO CHG FULL 1h may appear on the display. This is not a malfunction. In the following cases, the time/LOG display may show -- -- or the time display may be out. This is not a malfunction.

There is a difference between the time display and actual charging time. (Even if this happens, continue charging until fully charged.) When charging a battery other than an InfoLITHIUM battery pack (Battery life display and other functions are not available.) When last use year and month are unclear. (When you attach the battery pack to a video camera but do not turn on the power of the video camera, or the calendar function of the video camera is not setup, etc.) If the battery pack is removed from this unit after normal charging is complete but before full charging is complete. (It takes about one hour from when normal charging is complete to when full charging is complete.) When charging a battery pack that has not been used for a long time. (Fully charge once first.)

When two battery packs are attached to this unit, similar symptoms may appear if either one of the batteries is in the above condition.

BATTERY LOG display is available with the rechargeable battery packs NP- F970, NP-F770 and NP-F570. With other battery packs, the contents of the display are limited.

Fuse Replacement The car battery cord (DCC-VQ1) contains a fuse in the cigarette lighter plug. If the car battery cord (DCC-VQ1) does not work properly, check to see if the fuse has blown. If it has, replace it by purchasing a fuse with the same rating (4 A, 125 V) such as from your nearest Sony dealer. 1 Twist the end of the plug and remove it. 2 Remove the blown fuse. 3 Insert a new fuse and twist the end of the plug to tighten. Notes

Replace the fuse with a fuse with the same rating (4 A, 125 V). If your cars cigarette lighter socket is dirty with ash, etc., the plug part can become hot due to a poor connection. Always clean before use. Do not replace the fuse with anything except a fuse with the specified rating. If the new fuse blows soon after replacement, consult your nearest Sony dealer.

Contact your car dealer about the polarity of your cars grounding, the voltage of your car battery, etc.

Specifications AC Adapter/Charger (AC-VQ1051D) Input 100 V - 240 V AC 50 Hz/60 Hz 22 W

12 V/24 V DC (only for negative grounded cars) Output 8.4 V DC 2.0 A (VCR/CAMERA)

8.4 V DC 1.6 A (CHARGE) Operating temperature 0 C to 40 C (32 F to 104 F) Storage temperature 20 C to +60 C (4 F to +140 F) Dimensions (Approx.) 123 mm 53 mm 135 mm (w/h/d)

(4 7/8 in. 2 1/8 in. 5 3/8 in.) (excluding the projecting parts)

Mass Approx. 400 g (14.1 oz.)

Car battery cord (DCC-VQ1) Input voltage DC 12 V/24 V Fuse rating 125 V 4 A Cord length Approx. 1.5 m (59 1/8 in.) Mass Approx. 80 g (3.0 oz.) Included items AC Adaptor/Charger (AC-VQ1051D) (1) AC Power cord (1) Connecting cord (DK-215) (1) Connecting cord (DK-415) (1) Car battery cord (DCC-VQ1) (1) Set of printed documentation

Design and specifications are subject to change without notice.

Note

This unit supports worldwide voltages 100 V to 240 V. Do not use an electronic voltage transformer, as this may cause a malfunction.

Troubleshooting Symptom Cause/Solution

Video equipment does not work.

The power plug is disconnected from the wall outlet (wall socket). The car battery cord DCC-VQ1 is disconnected from the cigarette lighter socket.

Insert into a wall outlet or cigarette lighter socket. The connector cable is not properly connected.

Connect properly. The output change switch is set to CHARGE.

Set the output change switch to VCR/CAMERA. The battery pack does not charged.

The output change switch is set to VCR/CAMERA. Set the output change switch to CHARGE.

Power immediately turns off even though there is sufficient battery life remaining, or the displayed battery life differs from the actual battery life.

Run down the battery pack and then fully charge it again. The battery life will be correctly displayed.

The display does not changed.

Refer to Notes on the BATTERY LIFE indicator.

Lo is displayed in the display window.

The temperature of the battery pack is too low. Charging is performed at lower temperature than the recommended charging temperature range.

The display shown below may appear if a battery pack with a low temperature is attached, or if charging is performed at a lower temperature than the recommended charging temperature range. Although charging can still be performed in these cases, if this situation continues, this unit will switch to the standby state (refer to the following item) or charging will be not performed properly in order to protect the battery pack. We recommend charging the battery pack at 10 C to 30 C (50 F to 86 F).

The CHARGE lamp blinks in the following two ways. Blinks quickly: Turns on and off repeatedly every 0.15 seconds Blinks slowly: Turns on and off repeatedly every 1.5 seconds When the CHARGE lamp blinks, read the following and take suitable action depending on how the CHARGE lamp blinks.

Symptom Cause/Solution When the CHARGE lamp keeps blinking slowly and WAITING is displayed in the display window.

Charging is temporarily stopped. This unit is in the standby state. If the room temperature or the battery temperature is out of the appropriate temperature range, charging stops automatically. When the room temperature returns to the appropriate range, the CHARGE lamp lights up and charging restarts. We recommend charging the battery pack at 10 C to 30 C (50 F to 86 F).

When the CHARGE lamp keeps blinking quickly and WARNING is displayed in the display window.

When charging the battery pack for the first time in one of the following situations, the CHARGE lamp may blink quickly. If this happens, remove the battery pack from this unit, reattach it and charge it again. When the battery pack has been left for a

long time When the battery pack has been left

attached to the camera for a long time Immediately after purchase If WARNING is still displayed, check by following the steps below.

Remove the battery pack from this unit and then reattach it.

The CHARGE lamp starts blinking again: Attach another InfoLITHIUM battery pack.

The CHARGE lamp lights up but does not start blinking again: If the CHARGE lamp goes out because the charging time has passed, there is no problem.

The CHARGE lamp starts blinking again: The problem is possibly with this unit.

The CHARGE lamp lights up and does not start blinking again: If the CHARGE lamp goes out because the charging time has passed, the problem is with the battery pack first attached.

Please contact your nearest Sony dealer regarding any products that may have a problem.

Merci pour lachat de cet adaptateur/chargeur CA Sony.

Avant dutiliser cet appareil, veuillez lire attentivement ce manuel et le conserver pour toute rfrence future.

Aide-mmoire Les numros de modle et de srie se situent sous lappareil. Prendre en note le numro de srie dans lespace prvu ci-dessous. Se reporter ces numros lors des communications avec le dtaillant Sony au sujet de ce produit.

Modle no. AC-VQ1051D No de srie

AVERTISSEMENT Afin de rduire les risques dincendie ou de dcharge lectrique, nexposez pas cet appareil la pluie ou lhumidit. Pour rduire les risques dincendie ou dlectrocution, 1) nexposez lappareil la pluie ou lhumidit ; 2) ne placez pas dobjets remplis de liquides (vases, etc.) sur lappareil. Pour viter toute dcharge lectrique nouvrez pas le chargeur. Confiez toute rparation un personnel qualifi seulement.

Le cordon dalimentation secteur doit tre remplac dans un centre de rparations agr uniquement.

ATTENTION Remplacer la pile par une pile du type spcifi uniquement. Sinon, cela peut provoquer un incendie ou des blessures.

PRCAUTION Lappareil nest pas dconnect de la source dalimentation secteur tant quil reste branch sur la prise murale, mme sil a t mis hors tension.

AVIS LA CLIENTLE AUX TATS-UNIS AVERTISSEMENT Par la prsente, vous tes avis du fait que tout changement ou toute modification ne faisant pas lobjet dune autorisation expresse dans le prsent manuel pourrait annuler votre droit dutiliser lappareil. Note Lappareil a t test et est conforme aux exigences dun appareil numrique de Classe B, conformment la Partie 15 de la rglementation de la FCC. Ces critres sont conus pour fournir une protection raisonnable contre les interfrences nuisibles dans un environnement rsidentiel. Lappareil gnre, utilise et peut mettre des frquences radio; sil nest pas install et utilis conformment aux instructions, il pourrait provoquer des interfrences nuisibles aux communications radio. Cependant, il nest pas possible de garantir que des interfrences ne seront pas provoques dans certaines conditions particulires. Si lappareil devait provoquer des interfrences nuisibles la rception radio ou la tlvision, ce qui peut tre dmontr en allumant et teignant lappareil, il est recommand lutilisateur d essayer de corriger cette situation par lune ou lautre des mesures suivantes :

Rorienter ou dplacer lantenne rceptrice. Augmenter la distance entre lappareil et le rcepteur. Brancher lappareil dans une prise ou sur un circuit diffrent de celui sur lequel le rcepteur est branch. Consulter le dtaillant ou un technicien expriment en radio/tlviseurs.

AVIS LA CLIENTLE AUX TATS-UNIS ET AU CANADA

CONSIGNES DE SCURIT IMPORTANTES CONSERVEZ CES CONSIGNES DANGER POUR RDUIRE LE RISQUE DINCENDIE OU DE CHOC LECTRIQUE, SUIVEZ ATTENTIVEMENT CES CONSIGNES. Lire ces consignes. Conserver ces consignes. Tenir compte de tous les avertissements. Suivre toutes les instructions. Ne pas utiliser cet appareil prs de leau. Nettoyer uniquement avec un chiffon sec. Ne pas bloquer les ailettes de ventilation. Installer selon les instructions du

fabricant. Ne pas installer prs de sources de chaleur, comme les radiateurs, les rsistances

lectriques, les poles ou autres appareils (amplificateurs compris) diffusant de la chaleur.

Ne pas supprimer le dispositif de scurit dune fiche polarise ou avec terre. Une fiche polarise a deux lames, dont une est plus large que lautre. Une fiche avec terre a deux lames et une broche. La lame la plus large et la broche servent de dispositif de scurit. Si la fiche fournie ne sinsre pas dans la prise lectrique, consulter un lectricien pour faire remplacer la prise obsolte.

Protger le cordon dalimentation particulirement au niveau des fiches, des prises de courant et de la sortie du cble de lappareil pour quil ne soit pas pitin ou coinc.

Nutiliser que les fixations et accessoires spcifis par le fabricant.

Nutiliser quavec le chariot, meuble, trpied, support ou table spcifi par le fabricant, ou vendu avec lappareil. Si un chariot est utilis, faire trs attention pendant le transport de ne pas renverser le chariot avec lappareil pour viter toute blessure.

Dbrancher cet appareil pendant les orages lectriques et sil ne doit pas tre utilis pendant un certain temps.

Pour toute rparation sadresser un personnel qualifi. Une rparation est ncessaire lorsque lappareil a t endommag dune faon quelconque, par exemple lorsque le cordon dalimentation ou sa fiche a t endommag, du liquide sest rpandu ou des objets sont tombs dans lappareil, lappareil a t expos la pluie ou lhumidit, ne fonctionne pas normalement ou est tomb.

Si la forme de la fiche ne correspond pas celle de la prise murale, utilisez un adaptateur de fiche correspondant la prise murale.

Les batteries pouvant tre recharges pour ce produit sont les suivantes

Marque Sony Type de batterie NP-F570 NP-F770 NP-F970 Valeur nominale (Capacit typique)

CC 7,2 V 15,8 Wh

(2 200 mAh)

CC 7,2 V 31,7 Wh

(4 400 mAh)

CC 7,2 V 47,5 Wh

(6 600 mAh)

Reprsentation des fiches des cordons dalimentation CA des pays ou rgions du monde

Type A (amricain)

Type B (anglais)

Type BF (anglais)

Type B3 (anglais)

Type C (CEE)

Type SE (CEE)

Type O (ocanien)

La tension dalimentation et le type de fiche reprsentatifs sont dcrits dans le tableau suivant. Il est possible que plusieurs types de fiches et tensions dalimentation soient utiliss dans une rgion.

Attention : il convient dutiliser un cordon dalimentation satisfaisant aux exigences de chaque pays.

Pour les tats-Unis uniquement Utilisez, dans la liste UL, un cordon dalimentation de 1,5 3 m (5 10 pieds), type SPT-2 ou NISPT-2, AWG n 18, pour une tension nominale de 125 V 7 A, avec une fiche 1-15P NEMA pour une tension nominale de 125 V 15 A.

Europe Pays/rgions Tension Frquence (Hz) Type de fiche Autriche 230 50 C Belgique 230 50 C Rpublique tchque 220 50 C Danemark 230 50 C Finlande 230 50 C France 230 50 C Allemagne 230 50 C Grce 220 50 C Hongrie 220 50 C Islande 230 50 C Irlande 230 50 C/BF Italie 220 50 C Luxembourg 230 50 C Pays-Bas 230 50 C Norvge 230 50 C Pologne 220 50 C Portugal 230 50 C Roumanie 220 50 C Russie 220 50 C Slovaquie 220 50 C Espagne 127/230 50 C Sude 230 50 C Suisse 230 50 C Royaume-Uni 240 50 BF

Asie Pays/rgions Tension Frquence (Hz) Type de fiche Chine 220 50 A Hong Kong 200/220 50 BF Inde 230/240 50 C Indonsie 127/230 50 C Japon 100 50/60 A Rpublique de Core 220 60 C Malaisie 240 50 BF Philippines 220/230 60 A/C Singapour 230 50 BF Taiwan 110 60 A Thalande 220 50 C/BF Vietnam 220 50 A/C

Ocanie Pays/rgions Tension Frquence (Hz) Type de fiche Australie 240 50 O Nouvelle-Zlande 230/240 50 O

Amrique du nord Pays/rgions Tension Frquence (Hz) Type de fiche Canada 120 60 A tats-Unis 120 60 A

Amrique centrale Pays/rgions Tension Frquence (Hz) Type de fiche Bahamas 120/240 60 A Costa Rica 110 60 A Cuba 110/220 60 A/C Rpublique dominicaine 110 60 A

El Salvador 110 60 A Guatemala 120 60 A Honduras 110 60 A Jamaque 110 50 A Mexique 120/127 60 A Nicaragua 120/240 60 A Panama 110/220 60 A

Amrique du sud Pays/rgions Tension Frquence (Hz) Type de fiche Argentine 220 50 C/BF/O Brsil 127/220 60 A/C Chili 220 50 C Colombie 120 60 A Prou 220 60 A/C Venezuela 120 60 A

Moyen-Orient Pays/rgions Tension Frquence (Hz) Type de fiche Iran 220 50 C/BF Irak 220 50 C/BF Isral 230 50 C Arabie saoudite 127/220 50 A/C/BF Turquie 220 50 C EAU 240 50 C/BF

Afrique Pays/rgions Tension Frquence (Hz) Type de fiche Algrie 127/220 50 C Rpublique dmocratique du Congo

220 50 C

gypte 220 50 C thiopie 220 50 C Kenya 240 50 C/BF Nigeria 230 50 C/BF Afrique du Sud 220/230 50 C/BF Tanzanie 230 50 C/BF Tunisie 220 50 C

CONSIGNES DE SCURIT IMPORTANTES Pour votre protection, veuillez lire ces consignes de scurit compltement avant d'utiliser lappareil, et conserver ce manuel pour toute rfrence future. Respectez attentivement et suivez tous les avertissements, prcautions et instructions mentionns sur lappareil, ou dcrits dans le mode d'emploi. 1 CONSERVEZ CES INSTRUCTIONS Ce manuel contient des consignes

importantes sur la scurit et le fonctionnement du chargeur de batterie. 2Avant d'utiliser le chargeur de batterie, lisez toutes les instructions et tous les

signes de prcautions prsents sur le chargeur de batterie, la batterie et le produit utilisant la batterie.

3 ATTENTION Pour rduire le risque de blessure, n'insrez que les batteries rechargeables au lithium-ion prconises. Les autres types de batteries peuvent clater, causant des blessures et des dommages.

4N'exposez pas le chargeur la pluie, l'humidit ou la neige. 5L'emploi d'une fixation non recommande ou vendue par le fabricant du

chargeur de batterie peut tre l'origine d'un incendie, d'une dcharge lectrique ou de blessures.

6Pour viter d'endommager la fiche et le cordon de l'allume-cigare, tirez sur la fiche de l'allume-cigare et non pas sur le cordon lorsque vous dbranchez le chargeur.

7Assurez-vous que le cordon est dispos de sorte qu'on ne risque pas de marcher dessus, de se prendre les pieds dedans ou de l'endommager ou tirer de quelque faon.

Pour les clients en Europe < Avis aux consommateurs des pays appliquant les Directives UE > Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japon. Le reprsentant agr pour la compatibilit lectromagntique et la scurit du produit est Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question relative la garantie ou aux rparations, reportez-vous adresse que vous trouverez dans les documents ci-joints, relatifs la garantie et aux rparations.

Traitement des appareils lectriques et lectroniques en fin de vie (Applicable dans les pays de lUnion Europenne et aux autres pays europens disposant de systmes de collecte slective) Ce symbole, appos sur le produit ou sur son emballage, indique que ce produit ne doit pas tre trait avec les dchets mnagers. Il doit tre remis un point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. En sassurant que ce produit est bien mis au rebut de manire approprie, vous aiderez prvenir les consquences ngatives potentielles pour lenvironnement et la sant humaine. Le recyclage des matriaux aidera prserver les ressources naturelles. Pour toute information supplmentaire au sujet du recyclage de ce produit, vous pouvez contacter votre municipalit, votre dchetterie ou le magasin o vous avez achet le produit.

Remarques concernant lemploi Cet appareil nest pas tanche la poussire, aux claboussures deau ou leau.

Garantie concernant les enregistrements Lutilisateur ne pourra pas tre ddommag pour une absence denregistrement ou de lecture due une dfectuosit de la batterie, de ladaptateur CA, de ladaptateur/ chargeur CA.

Charge Cet appareil est conu pour les batteries Sony dorigine.

Ne chargez que les batteries recommandes avec cet appareil. Insrez bien comme il faut chaque batterie.

Temprature de charge Pour une charge optimale de la batterie, une temprature de 10 C 30 C (50 F 86 F) est conseille lors de la charge. La charge devient plus difficile basses tempratures. Cet appareil permet deffectuer des charges rapides, mais hors de la plage de tempratures recommande les temps de charge sont allongs pour protger la batterie. Lorsque le temps de charge a t allong, vous ne pouvez pas revenir une charge rapide en ramenant la temprature la plage conseille. Remettez la batterie en place et chargez-la de nouveau.

O ne pas mettre cet appareil Ne mettez pas cet appareil aux endroits suivants, ni pour la charge ni pour lentreposage. Ceci peut entraner une panne.

Endroits extrmement chauds. Prs dun appareil de chauffage ou en plein soleil, comme sur le tableau de bord dune voiture. Lintrieur des voitures devient particulirement chaud si les vitres restent fermes en t, ou les jours de grosses chaleurs. Cet appareil pourrait se dformer ou mal fonctionner.

un endroit expos des vibrations excessives un endroit expos un magntisme ou des radiations un endroit o il y a beaucoup de sable ou de poussire

Protgez cet appareil du sable et de la poussire, par exemple sur une plage ou des endroits exposs au sable ou une grande quantit de poussire, sous peine de panne.

Prcautions demploi Nutilisez pas lappareil dans un endroit exigu, notamment entre un mur et un meuble. Une quantit ngligeable de courant lectrique circule dans cet appareil tant quil est branch sur une prise murale. La plaque signaltique indiquant la tension de fonctionnement, la consommation, etc. se trouve sous lappareil. Insrez bien la batterie rechargeable dans cet appareil avant de la charger. Nutilisez pas cet appareil un endroit expos des ondes radio ou des radiations puissantes. Votre camscope, etc. pourrait ne pas effectuer correctement lenregistrement et la lecture. Ne laissez pas tomber ou ne soumettez pas des chocs cet appareil. Gardez cet appareil lcart des tlviseurs, rcepteurs AM et autres tuners. Placs proximit, ils pourraient tre affects par des interfrences. Utilisez une prise murale (prise lectrique) proche lorsque vous utilisez cet appareil. Mme si le tmoin CHARGE de cet appareil est teint, lappareil reste sous tension. Si un problme se prsente lorsque vous utilisez cet appareil, coupez immdiatement lalimentation en dbranchant le cordon de la prise murale (prise lectrique). Faites attention ce quaucun objet mtallique ne touche les parties mtalliques de cet appareil ou du cordon de liaison. Ceci pourrait causer un court-circuit et endommager lappareil. Ne branchez pas cet appareil sur un adaptateur de tension pour voyages ltranger. Ceci pourrait causer une surchauffe ou une autre dfaillance. Dbranchez cet appareil de la prise murale aprs utilisation. Pour dbrancher le cordon, tirez sur la fiche. Ne tirez jamais sur le cordon proprement dit. Ne posez pas dobjets remplis de liquides, comme des vases, sur cet appareil. Cet appareil ou la batterie peut devenir chaud pendant ou immdiatement aprs la charge. Cest normal. Retirez la batterie de cet appareil lorsque la charge est termine. Si vous la laissez sur lappareil son autonomie peut tre rduite.

Utilisation du cordon allume-cigare (DCC-VQ1) Utilisez cet appareil seulement dans une voiture disposant dune batterie de 12 volts ou de 24 volts. Certaines voitures sont ngatives la masse et dautres sont positives la masse. Cet appareil est destin aux voitures ngatives la masse. Utilisez cet appareil quand le moteur de la voiture tourne. Si vous utilisez cet appareil quand le moteur de la voiture est larrt, la batterie de la voiture risque de se vider. Dbranchez le cordon allume-cigare de la prise allume-cigare lorsque vous ne lutilisez pas. Pour dbrancher le cordon, tirez sur la fiche. Ne tirez jamais sur le cordon proprement dit.

Entretien Lorsque cet appareil est sale, essuyez-le avec un chiffon sec et doux ou du papier soie. Si cet appareil est trs sale, essuyez-le avec un chiffon tremp dans un solvant neutre dilu, aprs lavoir bien essor, puis essuyez-le avec un chiffon sec. Nutilisez pas de diluants, benzine, alcool, etc. qui risquent de dtriorer ou dendommager la surface de cet appareil. Si vous utilisez un tissu de nettoyage chimique, consultez son mode demploi. La vaporisation dun solvant volatil, tel quun insecticide ou un contact prolong avec du caoutchouc ou du vinyle peut dtriorer ou endommager cet appareil.

Identification des lments Obturateur de borne Logement Prise DC IN

(seulement pour le DCC-VQ1) Prise DC OUT Tmoin CHARGE Logement Tmoin CHARGE Slecteur de sortie Slecteur de mode de charge Afficheur Indicateur de logement Touche de changement DISPLAY

Afficheur Indicateur InfoLITHIUM Indicateur WAITING Indicateur WARNING Indicateur TIME TO CHG (charge) Indicateur Temps/LOG Indicateur BATTERY LIFE Indicateur VCR/CAMERA Indicateur de charge normale Indicateur de charge complte Indicateur dautonomie de la

batterie

L'adaptateur/chargeur CA AC-VQ1051D peut tre utilis de la faon suivante. Ladaptateur/chargeur CA AC-VQ1051D peut tre utilis la maison ou dans une voiture. Raccordez le cordon dalimentation (fourni) sur une prise murale, ou branchez le cordon allume-cigare DCC-VQ1 sur lallume-cigare de votre voiture. (Pour les voitures ngatives (-) la masse seulement.)

Pour faire fonctionner un appareil Sony (camscopes, etc.), utilisez les cordons de liaison fournis avec cet appareil. Pour charger des batteries rechargeables Sony (sries L).

Vous pouvez rgler le niveau de charge souhait sur Charge complte ou Charge normale avec le slecteur de mode de charge. Si vous voulez charger rapidement une batterie, rglez le slecteur sur Charge normale pour atteindre un niveau de charge normal.

Lorsque des batteries InfoLITHIUM sont insres dans cet appareil, les fonctions suivantes sont disponibles.

Charge rapide (Plus rapide que la charge avec votre camscope, etc.) BATTERY LOG et les informations concernant la charge saffichent. Un historique de lutilisation de la batterie et son tat de charge saffichent.

Le temps de charge total, le nombre de charges, lanne et le mois de la dernire utilisation Lautonomie de la batterie, le temps restant jusqu la fin de la charge

Cet appareil est conu pour les batteries au lithium-ion. Il ne peut pas tre utilis pour charger des batteries Ni-Cd ou Ni-MH. Cet appareil ne peut pas tre utilis avec certains modles de camscopes et certains appareils. Assurez-vous de la compatibilit de votre appareil avant usage.

Que dsigne InfoLITHIUM ? InfoLITHIUM dsigne un nouveau type de batterie au lithium-ion qui peut changer des donnes sur la consommation dnergie avec un appareil lectronique compatible. Il est conseill dutiliser des batteries InfoLITHIUM (srie L) avec un appareil lectronique portant la marque .

InfoLITHIUM est une marque commerciale de Sony Corporation. Que dsigne BATTERY LOG ? BATTERY LOG dsigne lhistorique des utilisations, enregistr dans la batterie.

Temps total de charge Nombre de charges Anne et mois de la dernire utilisation (Les indications sont approximatives. Selon la batterie, les informations affiches peuvent tre moins compltes.)

Remarques sur lindicateur BATTERY LIFE (Lire avec attention avant utilisation.) Pendant la charge de la batterie, cet appareil indique ltat de charge et les informations concernant la batterie dans la mesure o les conditions suivantes sont remplies.

Vous utilisez une batterie InfoLITHIUM . Votre camscope, etc. est compatible avec InfoLITHIUM .

Assurez-vous que votre batterie prsente le signe . Vrifiez dans le mode demploi fourni avec votre appareil vido si celui-ci est compatible InfoLITHIUM . Si vous utilisez la batterie avec plusieurs camscopes, etc. compatibles InfoLITHIUM , les informations qui apparaissent se rapportent lappareil sur lequel la batterie a t rattache en dernier lieu. BATTERY LOG est disponible sur les batteries rechargeables NP-F970, NP-F770 et NP-F570. Les autres batteries rechargeables peuvent ne pas tre compatibles ou peuvent afficher des informations moins compltes.

Pour faire fonctionner un appareil vido

Lorsque le cordon dalimentation secteur et le cordon allume-cigare DCC-VQ1 sont tout deux raccords, le courant est fourni en priorit par le cordon allume-cigare. Pour le dtail sur le raccordement, reportez-vous au mode demploi du camscope, etc. 1 Rglez le slecteur de sortie sur VCR/CAMERA. 2 Branchez le cordon dalimentation secteur ou le cordon allume-

cigare sur cet appareil. 3 Branchez le cordon dalimentation secteur sur une prise murale ou le

cordon allume-cigare sur une prise dallume-cigare. Un bip retentit et laffichage apparat.

(Suite au recto.)

4 Raccordez le cordon de liaison la prise DC OUT de cet appareil. 5 Raccordez le cordon de liaison au camescope.

Pour le sens dinsertion du cordon de liaison, reportez-vous au mode demploi du camscope, etc. Lorsque le cordon de liaison DK-215 est utilis (Illustration -) Lorsque le cordon de liaison DK-415 est utilis (Illustration -)

Remarques Le rglage du slecteur de sortie sur CHARGE pendant le fonctionnement du camscope, etc. a pour effet de couper lalimentation du camscope. Vous ne pouvez pas charger la batterie rattache cet appareil lorsque celui-ci est en mode VCR/CAMERA. loignez cet appareil du camscope, etc. si limage est dforme. Le cordon de liaison DK-415 peut tre utilis avec un appareil compatible avec la batterie rechargeable (sries L). Assurez-vous de la compatibilit de votre appareil avant usage. Lillustration montre le raccordement dun Camscope numrique HD HDR- AX2000.

Pour charger la batterie Lorsque le cordon dalimentation secteur et le cordon allume-cigare DCC-VQ1 sont tout deux raccords, le courant est fourni en priorit par le cordon allume-cigare. 1 Rglez le slecteur de mode de charge sur NORMAL CHARGE ou

FULL CHARGE . Si vous voulez que la batterie soit compltement charge, rglez le slecteur de mode de charge sur FULL CHARGE . Si vous voulez que la charge sarrte quand la batterie est normalement charge, rglez-le sur NORMAL CHARGE . Pour le dtail, reportez-vous Slection du mode de charge .

2 Rglez le slecteur de sortie sur CHARGE. 3 Branchez le cordon dalimentation secteur ou le cordon allume-

cigare sur cet appareil. 4 Branchez le cordon dalimentation secteur sur une prise murale ou le

cordon allume-cigare sur une prise dallume-cigare. Un bip retentit et laffichage apparat.

5 Insrez la batterie rechargeable. Reportez-vous Pour rattacher la batterie rechargeable . Lorsque la charge commence, lindicateur dautonomie de la batterie clignote dans lafficheur et le tmoin CHARGE sallume.

6 Lorsque la charge est termine, retirez la batterie. La charge sarrte sur cet appareil selon le niveau de charge spcifi avec le slecteur de mode de charge. Lorsque le tmoin CHARGE steint, la charge est termine. Pour le dtail sur la fin de la charge, reportez-vous Slection du mode de charge . Reportez-vous Pour retirer la batterie lorsque vous voulez retirer la batterie.

Slection du mode de charge Il y a deux niveaux de fin de charge : Charge normale et Charge complte . Vous pouvez changer de mode de charge avec le slecteur de mode de charge sur cet appareil.

Charge normale (NORMAL CHARGE)

Lorsque la charge est termine, lindicateur dautonomie de la batterie apparat de la faon illustre droite. La batterie restera en meilleur tat mais son autonomie sera un peu infrieure celle dune batterie compltement charge.

Charge complte (FULL CHARGE)

Lorsque la charge est termine et la batterie compltement charge, lindicateur dautonomie de la batterie apparat de la faon illustre droite. Lautonomie de la batterie sera lgrement plus courte que lors dune charge normale, mais le temps de charge sera plus long.

Rattachement simultan de deux batteries Vous pouvez rattacher deux batteries en mme temps cet appareil. Vous pouvez aussi charger une seule batterie. La charge commence par la batterie installe dans le logement . Si deux batteries sont rattaches mais pas simultanment, la charge commence par la premire batterie rattache, que ce soit dans le logement ou le logement .

Remarques Deux batteries peuvent tre rattaches, mais elles ne peuvent pas tre charges simultanment dans le cas dune charge normale. Lorsque le slecteur de mode de charge est en position FULL CHARGE , lappareil charge dabord les batteries dans lordre dans lequel elles ont t rattaches jusquau niveau normal, puis complte la charge simultanment sur les deux batteries.

Pour rattacher la batterie rechargeable (-) Placez la batterie sur cet appareil avec le repre du ct de

lobturateur de borne. Faites glisser la batterie dans le sens de la flche.

Appuyez sur la batterie jusqu ce que lobturateur de borne soit compltement dissimul.

Pour retirer la batterie rechargeable (-) Faites glisser la batterie dans le sens de la flche et levez-la tout droit.

Remarques Ne saisissez pas cet appareil par la batterie. Veillez ne pas heurter lobturateur de borne. Lorsque vous rattachez la batterie, faites attention ne pas heurter la batterie contre lobturateur. Faites attention ne pas vous pincer les doigts lorsque vous rattachez ou retirez la batterie.

Temps de charge Charge rapide

NP-F970 NP-F770 NP-F570

Charge normale 285 min 185 min 110 min

Charge complte 345 min 245 min 170 min

Les temps indiqus correspondent la charge dune batterie vide avec cet appareil une temprature ambiante de 25 C (77 F). Le temps de charge peut tre diffrent selon ltat de la batterie et la temprature ambiante.

Pour utiliser rapidement la batterie Vous pouvez utiliser la batterie mme si vous la retirez de cet appareil avant la fin de la charge. Toutefois, le temps dutilisation sera dautant plus court que le temps de charge est court. Remarques

Si le slecteur de sortie est sur VCR/CAMERA pendant la charge, la charge sarrte. Si le tmoin CHARGE ne sallume ou clignote pas, vrifiez si la batterie est installe correctement sur cet appareil. Si elle nest pas installe correctement, elle ne se chargera pas. La charge rapide nest possible quavec les batteries InfoLITHIUM . Lorsque le slecteur de mode de charge est en position NORMAL CHARGE , la charge sarrte quand le niveau de charge normal est atteint. Vous pouvez changer de mode de charge avant la fin de chaque charge.

Si quelque chose ne fonctionne pas pendant la charge, le tmoin CHARGE clignote et WARNING apparat sur lafficheur. Pour le dtail, voir En cas de problme .

Pour vrifier la charge Lorsque la charge dmarre, lautonomie sclaire dans lafficheur. Lautonomie de la batterie indique est le temps restant approximativement pour la prise de vue avec le viseur. Lautonomie de la batterie sera plus courte si lcran LCD est utilis. Lautonomie de la batterie peut ne pas tre indique avec certains camscopes. Pour le dtail, reportez-vous Remarques sur lindicateur BATTERY LIFE . Pendant la charge, le contenu de lafficheur peut tre chang de deux faons. Le contenu de lafficheur peut tre chang de deux faons : changement automatique de lafficheur ou changement chaque pression sur la touche de changement DISPLAY. Le tmoin de logement correspond au numro de logement. Linstallation dune batterie dans le logement puis dune autre dans le logement est donne titre dexemple ci-dessous.

Changement automatique du contenu de lafficheur pendant la charge (Voir lillustration ) Autonomie de la batterie

L'autonomie de la premire batterie rattache. C'est l'autonomie de la batterie rattache au dernier camscope, etc. compatible InfoLITHIUM utilis.

Autonomie de la batterie L'autonomie de la seconde batterie rattache.

Temps de charge Le temps restant total jusqu la fin de la charge complte des batteries installes dans le logement et le logement . Lorsque le slecteur de mode de charge est en position NORMAL CHARGE , le temps restant jusqu la fin dune charge normale apparat.

Appuyez sur la touche de changement DISPLAY pendant la charge. (Voir lillustration ) Pendant la charge BATTERY LOG peut tre affich par une pression sur la touche de changement DISPLAY. Le contenu de lafficheur change chaque fois que vous appuyez sur la touche de changement DISPLAY de la faon suivante. Environ cinq secondes aprs une pression sur la touche de changement DISPLAY, lautonomie de la batterie est indique puis laffichage bascule automatiquement entre lautonomie de la batterie et le temps restant jusqu la fin de la charge.

Temps total de charge Le temps de charge total de la premire batterie rattache. Indique le temps de charge total approximatif depuis la premire charge. Le minimum affich est 5 heures.

Nombre total de charges Le nombre de fois que la premire batterie rattache a t charge. Indique le nombre approximatif de fois que la batterie a t charge depuis sa premire charge. Le minimum affich est 5 fois, et ensuite le nombre est indiqu par un multiple de cinq. Les charges dappoint et les charges interrompues peuvent ne pas tre prises en compte.

Anne et mois de la dernire utilisation L'anne et le mois o la premire batterie rattache a t utilise en dernier. Indique le mois puis lanne (deux derniers chiffres de lanne). Si la batterie est utilise avec un camscope sur lequel la date na pas t spcifie, -- saffichera.

Temps total de charge Le temps de charge total de la seconde batterie rattache.

Nombre total de charges Le nombre de fois que la seconde batterie rattache a t charge.

Anne et mois de la dernire utilisation L'anne et le mois o la seconde batterie rattache a t utilise en dernier.

Appuyez sur la touche de changement DISPLAY lorsque la charge est termine. (Voir lillustration ) Lorsque la charge est termine, laffichage ne change pas automatiquement. Le contenu de lafficheur change chaque fois que vous appuyez sur la touche de changement DISPLAY de la faon suivante. Environ cinq secondes aprs une pression sur la touche de changement DISPLAY, il revient laffichage indiqu dans . La charge est termine. Lorsque le slecteur de mode de charge est

en position NORMAL CHARGE , lindicateur dautonomie de la batterie indique NORMAL .

Autonomie de la batterie L'autonomie de la premire batterie rattache.

Autonomie de la batterie L'autonomie de la seconde batterie rattache.

Temps total de charge Le temps de charge total de la premire batterie rattache.

Nombre total de charges Le nombre de fois que la premire batterie rattache a t charge.

Anne et mois de la dernire utilisation L'anne et le mois o la premire batterie rattache a t utilise en dernier.

Temps total de charge Le temps de charge total de la seconde batterie rattache.

Nombre total de charges Le nombre de fois que la seconde batterie rattache a t charge.

Anne et mois de la dernire utilisation L'anne et le mois o la seconde batterie rattache a t utilise en dernier.

Remarques Le temps indiqu est une valeur approximative pour une charge 25 C (77 F). Il peut tre diffrent du temps rel selon lenvironnement. De plus, selon ltat de la batterie, un temps peut ne pas safficher. Cest normal. Lindication du temps aprs le dbut de la charge ncessite un certain temps. Lindication du temps et lautonomie restante de la batterie sur le ct non charg peut mettre un certain temps apparatre. Pour afficher lautonomie dune batterie neuve, rattachez-la dabord votre camscope et utilisez-la environ 20 secondes, puis chargez-la sur cet appareil. Si vous rattachez une batterie compltement charge sur cet appareil, TIME TO CHG FULL 1h peut apparatre sur lafficheur. Cest normal. Dans les cas suivants, le temps/LOG peut tre remplac par -- -- ou lindication du temps peut tre absente. Cest normal.

Il y a une diffrence entre lindication du temps et le temps de charge rel. (Mme si ce cas se prsente, continuez de charger la batterie jusqu ce quelle soit compltement charge). Si vous chargez une autre batterie quune batterie InfoLITHIUM (Lindication de lautonomie de la batterie et dautres fonctions ne sont pas disponibles.) Si lanne et le mois de la dernire anne dutilisation ne sont pas vidents. (Lorsque vous rattachez la batterie un camscope mais nallumez pas le camscope, ou lorsque la date na pas t rgle sur le camscope, etc.) Si la batterie est retire de cet appareil aprs la charge normale mais avant la fin de la charge complte. (Il faut attendre environ une heure depuis la fin de la charge normale jusqu la fin de la charge complte.) Si la batterie charge na pas t utilise depuis longtemps. (Chargez-la dabord compltement.)

Lorsque deux batteries sont rattaches cet appareil, des symptmes similaires peuvent apparatre si une des batteries se trouve dans une des situations prcdentes.

Laffichage BATTERY LOG apparat avec les batteries rechargeables NP-F970, NP-F770 et NP-F570. Avec dautres batteries, les informations affiches sont moins compltes.)

Remplacement du fusible Le cordon allume-cigare (DCC-VQ1) contient un fusible dans la fiche allume-cigare. Si le cordon allume-cigare (DCC-VQ1) ne fonctionne pas correctement, vrifiez si le fusible na pas saut. Si cest le cas, remplacez-le par un fusible de mme calibre (4 A, 125 V) en vous adressant, par exemple, au revendeur Sony le plus proche. 1 Dvissez lextrmit de la fiche et dtachez-la. 2 Retirez le fusible grill. 3 Insrez un fusible neuf et revissez lextrmit de la fiche. Remarques

Remplacez le fusible par un fusible de mme calibre (4 A, 125 V). Si la prise d'allume-cigare de votre voiture est sale et couverte de cendres, etc., le contact est mauvais et lextrmit de la fiche peut devenir chaude. Nettoyez toujours la prise avant de lutiliser. Ne remplacez pas le fusible par autre chose quun fusible de mme calibre. Si le fusible saute de nouveau brivement aprs son remplacement, consultez le revendeur Sony le plus proche.

Contactez votre concessionnaire auto au sujet de la polarit de la masse de votre voiture, la tension de la batterie de votre voiture, etc.

Spcifications Adaptateur/chargeur CA (AC-VQ1051D) Entre 100 V - 240 V CA 50 Hz/60 Hz 22 W

12 V/24 V CC (seulement pour voitures ngatives la masse)

Sortie 8,4 V CC 2,0 A (VCR/CAMERA) 8,4 V CC 1,6 A (CHARGE)

Temprature de fonctionnement

0 C 40 C (32 F 104 F)

Temprature dentreposage 20 C +60 C (4 F +140 F) Dimensions (Environ) 123 mm 53 mm 135 mm (l/h/p)

(4 7/8 po. 2 1/8 po. 5 3/8 po.) (parties saillantes non comprises)

Poids Environ 400 g (14,1 oz)

Cordon allume-cigare (DCC-VQ1) Tension dentre CC 12 V/24 V Calibre du fusible 125 V 4 A Longueur du cordon Environ 1,5 m (59 1/8 po.) Poids Environ 80 g (3,0 oz) Articles inclus Adaptateur/Chargeur CA (AC-VQ1051D) (1) Cordon dalimentation secteur (1) Cordon de liaison (DK-215) (1) Cordon de liaison (DK-415) (1) Cordon allume-cigare (DCC-VQ1) (1) Jeu de documents imprims

La conception et les spcifications peuvent tre modifies sans pravis.

Remarque

Cet appareil supporte les tensions du monde entier, de 100 V 240 V. N'utilisez pas un transformateur lectronique de tension car ceci pourrait provoquer un dysfonctionnement.

En cas de problme Symptme Cause/Solution

Lappareil vido ne fonctionne pas.

La fiche dalimentation est dbranche de la prise murale (prise lectrique). Le cordon allume-cigare DCC-VQ1 est dbranch de la prise allume-cigare.

Insrez-le dans une prise murale ou dans une prise d'allume-cigare.

Le cble de liaison nest pas branch correctement. Branchez-le correctement.

Le slecteur de sortie est rgl sur CHARGE. Rglez le slecteur de sortie sur VCR/CAMERA.

La batterie ne se charge pas.

Le slecteur de sortie est rgl sur VCR/CAMERA. Rglez le slecteur de sortie sur CHARGE.

Lappareil steint immdiatement bien que la batterie soit encore suffisamment charge, ou bien lautonomie de la batterie indique est diffrente de lautonomie relle de la batterie.

Videz la batterie puis chargez-la compltement une nouvelle fois.

Lautonomie de la batterie sera indique correctement.

Laffichage ne change pas.

Reportez-vous Remarques sur lindicateur BATTERY LIFE .

Symptme Cause/Solution Lo apparat sur lafficheur.

La temprature de la batterie est trop basse. La batterie est charge une temprature infrieure la plage de tempratures de charge recommande.

Bien quil soit possible de charger la batterie dans ces cas, si cette situation persiste, cet appareil se mettra en veille (voir la rubrique suivante) ou la batterie ne sera pas charge correctement pour protger la batterie. Il est conseill de charger la batterie entre 10 C et 30 C (50 F et 86 F).

Le tmoin CHARGE clignote des deux faons suivantes. Clignotement rapide : Sallume et steint toutes les 0,15 secondes de faon rpte. Clignotement lent : Sallume et steint toutes les 1,5 secondes de faon rpte. Lorsque le tmoin CHARGE clignote, lisez ce qui suit et prenez la mesure approprie selon la faon dont le tmoin CHARGE clignote. Lorsque le tmoin CHARGE continue de clignoter lentement et WAITING apparat sur lafficheur.

La charge est temporairement arrte. Cet appareil est en attente. Si la temprature de la pice ou de la batterie est hors de la plage de tempratures approprie, la charge sarrte automatiquement. Lorsque la temprature de la pice revient la plage approprie, le tmoin CHARGE sallume et la charge redmarre. Il est conseill de charger la batterie rechargeable entre 10C et 30C (50 F et 86 F).

Lorsque le tmoin CHARGE clignote rapidement et WARNING apparat sur lafficheur.

La premire fois que vous chargez la batterie dans une des situations suivantes, le tmoin CHARGE peut clignoter rapidement. Dans ce cas, retirez la batterie de cet appareil puis rinsrez-la et chargez-la de nouveau. Si la batterie est reste longtemps inutilise Si la batterie est reste longtemps rattache

au camscope Immdiatement aprs lachat Si WARNING saffiche toujours, vrifiez les points suivants.

Retirez la batterie de cet appareil et rattachez-la de nouveau.

Le tmoin CHARGE se remet clignoter : Rattachez une autre batterie InfoLITHIUM .

Le tmoin CHARGE sallume mais ne se remet pas clignoter : Si le tmoin CHARGE steint parce que le temps de charge est dpass, il ny a aucun problme.

Le tmoin CHARGE se remet clignoter : Le problme vient peut-tre de cet appareil.

Le tmoin CHARGE sallume et ne se remet pas clignoter : Si le tmoin CHARGE steint parce que le temps de charge est dpass, le problme vient de la premire batterie rattache.

Veuillez contacter le revendeur Sony le plus proche au sujet des produits qui sont peut-tre dfectueux.

(Suite au recto)

Sony AC

1) 2)

AC

USBA/V DC

AC AC

Sony

10 30

CHARGE

DCC-VQ1 12 24

DC IN DCC-VQ1 DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG BATTERY LIFE VCR/CAMERA

AC-VQ1051D AC AC-VQ1051D AC DCC-VQ1 -) Sony Sony L InfoLITHIUM

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUM L

InfoLITHIUM Sony Corporation

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

NORMAL CHARGE

FULL CHARGE

FULL CHARGE

-

-

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

LCD BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAY DISPLAY DISPLAY 5

5

5 5

-- --

DISPLAY DISPLAY DISPLAY 5 NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h -- -- InfoLITHIUM NP-F970NP-F770 NP-F570

(DCC-VQ1) (DCC-VQ1) Sony (4 A, 125 V)

1 2 3

(4 A, 125 V) Sony

AC (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm (//)

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

AC (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

Sony AC

1) 2)

AC

USBA/V DC

AC AC

Sony

10 30

CHARGE

DCC-VQ1 12 24

DC IN DCC-VQ1 DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG BATTERY LIFE VCR/CAMERA

AC-VQ1051D AC AC-VQ1051D AC DCC-VQ1 -) Sony Sony L InfoLITHIUM

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUM L

InfoLITHIUM Sony Corporation

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

NORMAL CHARGE

FULL CHARGE

FULL CHARGE

-

-

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

LCD BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAY DISPLAY DISPLAY 5

5

5 5

-- --

DISPLAY DISPLAY DISPLAY 5 NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h -- -- InfoLITHIUM NP-F970NP-F770 NP-F570

(DCC-VQ1) (DCC-VQ1) Sony (4 A, 125 V)

1 2 3

(4 A, 125 V) Sony

AC (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm (//)

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

AC (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

Sony AC

1) 2)

AC

USBA/V DC

AC AC

Sony

10 30

CHARGE

DCC-VQ1 12 24

DC IN DCC-VQ1 DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG BATTERY LIFE VCR/CAMERA

AC-VQ1051D AC AC-VQ1051D AC DCC-VQ1 -) Sony Sony L InfoLITHIUM

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUM L

InfoLITHIUM Sony Corporation

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

NORMAL CHARGE

FULL CHARGE

FULL CHARGE

-

-

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

LCD BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAY DISPLAY DISPLAY 5

5

5 5

-- --

DISPLAY DISPLAY DISPLAY 5 NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h -- -- InfoLITHIUM NP-F970NP-F770 NP-F570

(DCC-VQ1) (DCC-VQ1) Sony (4 A, 125 V)

1 2 3

(4 A, 125 V) Sony

AC (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm (//)

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

AC (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

Sony AC

1) 2)

AC

USBA/V DC

AC AC

Sony

10 30

CHARGE

DCC-VQ1 12 24

DC IN DCC-VQ1 DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG BATTERY LIFE VCR/CAMERA

AC-VQ1051D AC AC-VQ1051D AC DCC-VQ1 -) Sony Sony L InfoLITHIUM

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUM L

InfoLITHIUM Sony Corporation

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

NORMAL CHARGE

FULL CHARGE

FULL CHARGE

-

-

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

LCD BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAY DISPLAY DISPLAY 5

5

5 5

-- --

DISPLAY DISPLAY DISPLAY 5 NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h -- -- InfoLITHIUM NP-F970NP-F770 NP-F570

(DCC-VQ1) (DCC-VQ1) Sony (4 A, 125 V)

1 2 3

(4 A, 125 V) Sony

AC (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm (//)

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

AC (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

Sony /

AC

/

Sony

10 30

CHARGE

(DCC-VQ1) 12V 24V

DC IN DCC-VQ1

DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG /LOG BATTERY LIFE

VCR/CAMERA

AC-VQ1051D / AC-VQ1051D / DCC-VQ1 (-) Sony Sony L InfoLITHIUM BATTERY LOG

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUML

InfoLITHIUM Sony

BATTERY LOG BATTERY LOG

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570 BATTERY LOG

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

(NORMAL CHARGE)

(FULL CHARGE)

FULL CHARGE

(-)

(-)

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

(LCD) BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAYBATTERY LOG DISPLAY DISPLAY

5

5 5

-- --

DISPLAY DISPLAY DISPLAY

NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h /LOG-- -- InfoLITHIUM 1 NP-F970NP-F770 NP-F570 BATTERY LOG

(DCC-VQ1) (DCC-VQ1) Sony 4 A125 V

1 2 3

4 A125 V Sony

/ (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm//

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

/ (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

/

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

2011 5

Sony /

AC

/

Sony

10 30

CHARGE

(DCC-VQ1) 12V 24V

DC IN DCC-VQ1

DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG /LOG BATTERY LIFE

VCR/CAMERA

AC-VQ1051D / AC-VQ1051D / DCC-VQ1 (-) Sony Sony L InfoLITHIUM BATTERY LOG

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUML

InfoLITHIUM Sony

BATTERY LOG BATTERY LOG

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570 BATTERY LOG

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

(NORMAL CHARGE)

(FULL CHARGE)

FULL CHARGE

(-)

(-)

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

(LCD) BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAYBATTERY LOG DISPLAY DISPLAY

5

5 5

-- --

DISPLAY DISPLAY DISPLAY

NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h /LOG-- -- InfoLITHIUM 1 NP-F970NP-F770 NP-F570 BATTERY LOG

(DCC-VQ1) (DCC-VQ1) Sony 4 A125 V

1 2 3

4 A125 V Sony

/ (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm//

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

/ (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

/

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

2011 5

Sony /

AC

/

Sony

10 30

CHARGE

(DCC-VQ1) 12V 24V

DC IN DCC-VQ1

DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG /LOG BATTERY LIFE

VCR/CAMERA

AC-VQ1051D / AC-VQ1051D / DCC-VQ1 (-) Sony Sony L InfoLITHIUM BATTERY LOG

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUML

InfoLITHIUM Sony

BATTERY LOG BATTERY LOG

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570 BATTERY LOG

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

(NORMAL CHARGE)

(FULL CHARGE)

FULL CHARGE

(-)

(-)

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

(LCD) BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAYBATTERY LOG DISPLAY DISPLAY

5

5 5

-- --

DISPLAY DISPLAY DISPLAY

NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h /LOG-- -- InfoLITHIUM 1 NP-F970NP-F770 NP-F570 BATTERY LOG

(DCC-VQ1) (DCC-VQ1) Sony 4 A125 V

1 2 3

4 A125 V Sony

/ (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm//

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

/ (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

/

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE CHARGE

CHARGE

CHARGE CHARGE

Sony

2011 5

Sony /

AC

/

Sony

10 30

CHARGE

(DCC-VQ1) 12V 24V

DC IN DCC-VQ1

DC OUT CHARGE CHARGE DISPLAY

InfoLITHIUM WAITING WARNING TIME TO CHG /LOG BATTERY LIFE

VCR/CAMERA

AC-VQ1051D / AC-VQ1051D / DCC-VQ1 (-) Sony Sony L InfoLITHIUM BATTERY LOG

Ni-Cd Ni-MH

InfoLITHIUM InfoLITHIUM InfoLITHIUML

InfoLITHIUM Sony

BATTERY LOG BATTERY LOG

BATTERY LIFE InfoLITHIUM InfoLITHIUM InfoLITHIUM

InfoLITHIUM

NP-F970NP-F770 NP-F570 BATTERY LOG

AC DCC-VQ1

1 VCR/CAMERA 2 AC 3 AC

4 DC OUT 5 DK-215 - DK-415 -

CHARGE VCR/CAMERA DK-415 L HDR-AX2000 HD

AC DCC-VQ1

1 NORMAL CHARGE FULL CHARGE FULL CHARGE NORMAL CHARGE

2 CHARGE 3 AC 4 AC

5 CHARGE

6 CHARGE

(NORMAL CHARGE)

(FULL CHARGE)

FULL CHARGE

(-)

(-)

NP-F970 NP-F770 NP-F570

285 185 110

345 245 170

25

VCR/CAMERA CHARGE InfoLITHIUM NORMAL CHARGE CHARGE WARNING

(LCD) BATTERY LIFE

DISPLAY

InfoLITHIUM

NORMAL CHARGE

DISPLAY DISPLAYBATTERY LOG DISPLAY DISPLAY

5

5 5

-- --

DISPLAY DISPLAY DISPLAY

NORMAL CHARGE NORMAL

25 20 TIME TO CHG FULL 1h /LOG-- -- InfoLITHIUM 1 NP-F970NP-F770 NP-F570 BATTERY LOG

(DCC-VQ1) (DCC-VQ1) Sony 4 A125 V

1 2 3

4 A125 V Sony

/ (AC-VQ1051D)

100 V - 240 V AC 50 Hz/60 Hz 22 W 12 V/24 V DC

8.4 V DC 2.0 A (VCR/CAMERA) 8.4 V DC 1.6 A (CHARGE)

0 40

20 +60

123 mm 53 mm 135 mm//

400 g

(DCC-VQ1)

DC 12 V/24 V

125 V 4 A

1.5 m

80 g

/ (AC-VQ1051D) (1) AC (1) (DK-215) (1) (DK-415) (1) (DCC-VQ1) (1)

100 V 240 V

/

DCC-VQ1

CHARGE VCR/CAMERA

VCR/CAMERA CHARGE

BATTERY LIFE

Lo

10 30

CHARGE 0.15 1.5 CHARGE CHARGE

CHARGE WAITING

CHARGE 10 30

CHARGE WARNING

CHARGE WARNING

CHARGE InfoLITHIUM

CHARGE

Manualsnet FAQs

If you want to find out how the AC-VQ1051D Sony works, you can view and download the Sony AC-VQ1051D Operating Instructions v2 on the Manualsnet website.

Yes, we have the Operating Instructions for Sony AC-VQ1051D as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operating Instructions should include all the details that are needed to use a Sony AC-VQ1051D. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony AC-VQ1051D Operating Instructions v2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony AC-VQ1051D Operating Instructions v2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony AC-VQ1051D Operating Instructions v2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony AC-VQ1051D Operating Instructions v2, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony AC-VQ1051D Operating Instructions v2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.