Sony SU-WL700 Owner's Manual PDF

Download download
Sony SU-WL700 Owner's Manual PDF
Sony Manual Sony Bracket Manual Sony SU-WL700 Manual Sony Bracket Owner's Manual
Pages 5
Year 2018
Language(s)
English en
1 of 5
1 of 5

Summary of Content for Sony SU-WL700 Owner's Manual PDF

Page 1

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

Compatible TV models for this Wall-Mount Bracket information:

XBR-55HX929/55HX927/55HX925/55HX920/46HX929

KDL-55HX827/55HX825/55HX820/46HX820

KDL-55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720

For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and that the wall-mounting of your TV is performed by Sony dealers or licensed contractors.

To Customers Please provide your licensed contractor with this installation supplement as well as the instructions (supplied with the SU-WL700 Wall-Mount Bracket). Read these documents carefully for safety and proper installation.

To Sony Dealers and Contractors Provide full attention to safety during the installation, periodic maintenance and examination of this product.

Sufficient expertise is required in installing this product, especially to determine the strength of the wall for withstanding the TVs weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.

For proper installation, follow your wall-mount bracket instructions and the directions below.

A-DXF-00-11()

Page 2

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

Installing the Wall-Mount Bracket Install the Base Bracket and Mounting Bracket.

1 Open the Wall-Mount Bracket package and check for all the required parts along with the Instructions.

2 Decide where you want to install your TV. Refer to the TV installation dimensions table.

Dimension Table

Screen center point

Unit: inches (mm)

Model Name Display dimensions

Screen center dimensions

Length for each mounting angle Angle (0) Angle (20)

XBR-55HX92* 50 3/8

(1,278) 30 3/8 (771)

7/32 (5)

15 1/2 (393)

2 3/8 (58)

14 7/8 (376)

28 3/4 (728)

18 (455)

XBR-46HX92* 42 5/8

(1,081) 26

(660) 2 1/8 (51)

15 1/2 (393)

2 3/8 (58)

13 3/8 (338)

24 5/8 (623)

18 (455)

KDL-55HX82* 50 1/2

(1,280) 30 1/2 (774)

7/32 (5)

15 5/8 (395)

1 7/8 (47)

14 1/2 (366)

28 3/4 (729)

17 7/8 (453)

KDL-46HX82* 42 3/4

(1,083) 26 1/8 (663)

2 1/8 (51)

15 5/8 (395)

1 7/8 (47)

13 (328)

24 5/8 (625)

17 7/8 (453)

KDL-55NX72* 50 1/2

(1,281) 30 1/2 (774)

7/32 (5)

15 5/8 (395)

1 7/8 (47)

14 1/2 (366)

28 3/4 (729)

17 7/8 (452)

KDL-46NX72* 42 3/4

(1,084) 26 1/8 (663)

2 1/8 (51)

15 5/8 (395)

1 7/8 (47)

13 (328)

24 5/8 (625)

17 7/8 (452)

KDL-40NX72* 37 3/8 (949)

23 1/8 (587)

4 1/8 (103)

15 5/8 (395)

1 7/8 (47)

12 (302)

21 7/8 (554)

17 7/8 (452)

* In the actual model names, the indicates numbers and/or characters specific to each model. Figures in the above table may differ slightly depending on the installation.

CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TVs operating instructions for its weight.

3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL700.

Page 3

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

4 Detach the Table-Top Stand from the TV. Remove the screws indicated by the arrow marks on the TV.

Soft cloth

Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on

the TV. When removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is

larger than the TV. To prevent damaging the surface of the TV, make sure to place a soft cloth on the work surface. When lifting or moving the TV, keep a soft cloth underneath to prevent damage. The number and position of the screws on the rear of the TV differs, depending on the model of TV; be

sure to read the operating instructions of your TV. Be sure the TV is in a vertical position before turning it on. The TV set must not be powered on with

the LCD panel face down to avoid uneven picture uniformity.

CAUTION If pressure or shock is applied to the surface of the TV, the TV may break or become damaged. Lay the TV face down on a stable and level surface with the Table-Top Stand hanging over the edge of

the surface. Having the TV face and the base of the Table-Top Stand on the same level surface will create an unstable working condition and can damage the TV.

When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands.

5 Attach the Mounting Bracket to the rear of the TV temporarily. Remove the screws from the rear of the TV. (They are fastened in the screw holes for wall

mounting.) Be sure to store the removed screws in a safe place, keeping them away from children.

Temporarily tighten the top of the Mounting Bracket using two screws (+PSW M6 6).

2

2

2

Soft cloth

2

Screw Mounting Bracket

Page 4

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

6 Attach the Lock Bracket to the bottom of the Mounting Bracket. Temporarily move the bottom of the Mounting Bracket outwards. If the bottom of the Mounting Bracket does not move, loosen the screws (return to step 5).

Insert the pins of the Mounting Bracket through the holes of the Lock Bracket. Return the Mounting Bracket to their original position to attach the Lock Bracket.

Lock Bracket

7 Secure the Mounting Bracket to the rear of the TV. When using an electric screwdriver, set the torque setting to approximately Nm {0 kgfcm}. Tighten the bottom of the Mounting Bracket using two screws (+PSW M6 6). Be sure that all screws are securely tightened with equal torque to the rear of the TV.

2

Screw

Page 5

5

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

8 Adjust the angle of the Mounting Bracket. Use the supplied hexagon wrench. When installing the Display parallel to the wall (0 degrees), adjustment of the Mounting Bracket angle (procedures and below) is not necessary. Remove the two angle adjusting screws from the Mounting Bracket. Secure the screws to the corresponding holes for the desired angle (, 5, 0, 5 or

0).

Hexagon wrench

Be sure that both the left and right sides are set to the same angle, and secure the screws to the

corresponding angle holes (two screws for each side, left and right). Make sure that the two arms of the Mounting Bracket are screwed in securely.

CAUTION Be careful not to pinch your fingers when adjusting the angle of the Mounting Bracket.

9 Install the TV on the wall. Refer to the Instructions for SU-WL700. Make sure that you carry out this task with at least two or three people. D

Manualsnet FAQs

If you want to find out how the SU-WL700 Sony works, you can view and download the Sony SU-WL700 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Sony SU-WL700 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Sony SU-WL700. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony SU-WL700 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony SU-WL700 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony SU-WL700 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony SU-WL700 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony SU-WL700 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.