Sony KDL-26S2000 Installation Guide v2 PDF

1 of 2
1 of 2

Summary of Content for Sony KDL-26S2000 Installation Guide v2 PDF

A

BD

E

500 (19 11/16)

500 (19 11/16)

2 1 0

(8 9

/3 2)

2 1 0 (

8 9 /

32 )

A

B

D

E

B

F

G

H

C

Installing the Wall-Mount Bracket

To Customers For product protection and safety reasons, Sony strongly recommends that wall-mounting of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. Your KDL-23S2000/KDL-23S200A/KDL-26S2000/KDL-26S200A/KDL- 32S2000/KDL-32S200A/KDL-32S20L1 can be wall-mounted using SU-WL31 Wall-Mount Bracket (sold separately). Please provide your licensed contractor with this installation supplement as well as the Instructions (supplied with the SU-WL31 Wall-Mount Bracket). Read these documents carefully for safety and proper installation.

To Sony Dealers and Contractors Provide full attention to safety during the installation, periodic maintenance and examination of this product.

Installation du support de fixation murale

lattention des clients Par souci de protection du produit et pour des raisons de scurit, Sony recommande vivement que linstallation du support de fixation mural du tlviseur soit confie un revendeur Sony ou un installateur agr. Ne pas tenter deffectuer linstallation soi-mme. Le KDL-23S2000/KDL-23S200A/KDL-26S2000/KDL-26S200A/KDL- 32S2000/KDL-32S200A/KDL-32S20L1 peut tre fix au mur laide du support de fixation mural SU-WL31(vendu sparment). Veuillez fournir linstallateur agr ce supplment ainsi que le mode demploi (accompagnant le support de fixation mural SU-WL31). Lire attentivement ces documents qui concernent la scurit et linstallation correcte du support.

lintention des revendeurs Sony et des installateurs Accorder une attention particulire la scurit lors de linstallation, de lentretien priodique et de la vrification de ce produit.

Instalacin del soporte de montaje mural

Para los clientes Por razones de proteccin del producto y de seguridad, Sony recomienda que el montaje mural del televisor sea realizado por un distribuidor o contratista autorizado de Sony. No intente instalarlo usted mismo. Puede instalarse el modelo KDL-23S2000/KDL-23S200A/KDL-26S2000/ KDL-26S200A/KDL-32S2000/KDL-32S200A/KDL-32S20L1 en una pared mediante el soporte de montaje mural SU-WL31 (se vende por separado). Muestre al contratista autorizado este suplemento para la instalacin, as como las instrucciones (suministradas con el soporte de montaje mural SU- WL31). Lea atentamente estos documentos para realizar la instalacin correctamente y de manera segura.

Para distribuidores y contratistas de Sony Ponga especial atencin a la seguridad durante la instalacin, mantenimiento peridico y comprobacin de este producto.

KDL-23S200A KDL-26S200A KDL-32S200A KDL-32S20L1

Espaol

Franais

English

2006 Sony Corporation Printed in U.S.A. 2-688-831-13(1)

English Step 1: Checking the parts required for

the installation

Open the Wall-Mount Bracket package and check the contents for all required parts along with the Instructions.

Step 2: Changing the position of the arm bases

Refer to the Instructions for the SU-WL31.

Step 3: Deciding on the installation location

Decide where you want to install your TV. Please refer to the Installation Dimensions Table to help determine the best location. Refer to the Instructions for the SU-WL31.

Step 4: Installing the Plate Unit on the wall

Refer to the Instructions for the SU-WL31.

Installing the TV on a wall The TV can be installed on a wall by attaching a Wall- Mount Bracket (sold separately). Verify your TVs model number and be sure to use the bracket specified for your model only. Refer to the Steps on this leaflet along with the Instructions supplied with the SU-WL31 Wall-Mount Bracket, to properly carry out the installation.

Sufficient expertise is required in installing this product, especially to determine the strength of the wall for withstanding the TVs weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.

Step 5: Preparing for the installation of the TV

Before detaching the Table-Top Stand, disconnect all the cables from the TV.

1 Rotate the cable holder by 90 degrees, and pull it out (A).

2 Remove the screws and detach the Table-Top Stand from the TV (B).

Notes Lay the display face down on a stable and level

surface with the Table-Top Stand hanging over the edge of the surface. Having the display face and the base of the Stand on the same level surface will create an unstable working condition and can damage the unit.

To prevent damaging the surface of the LCD display, place the TV on a soft cloth.

3 Align the holes on the Mounting Hook Units with the corresponding holes on the rear of the TV. Then secure them to the TV using four screws (supplied with SU-WL31) (C).

Note When using an electric screwdriver to tighten the screws, the torque must be approx. 2 Nm (20 kgfcm).

Step 6: Installing the TV on the Plate Unit

Refer to the Instructions for the SU-WL31.

1 Connect the AC power cord and cables to the corresponding jacks on the rear of the TV. For details on the cable connection, refer to the Operating Instructions for your TV.

2 Install the TV onto the Plate Unit.

Soft cloth Table-Top Stand

The supplied screws (+PSW5 L16)

A B C

Cable holder

Mounting Hook Units

Installation dimensions table*1 Tabla de las dimensiones de instalacin*1

*1 Installation dimensions may differ according to how the display is installed./ *1 Les dimensions dinstallation peuvent varier selon la faon dont lcran est install./ *1 Es posible que las dimensiones de instalacin varen en funcin de cmo se instale la pantalla. *2 The wall must be strong enough to support at least four times the weight of the display that you are installing./ *2 Le mur doit tre assez fort pour soutenir au moins quatre fois le poids de lcran que vous installez./ *2 La pared debe ser suficientemente resistente para soportar como mnimo cuatro veces el peso de la pantalla que est instalando.

English Espaol

Center line of the screen when installed on the wall/ Ligne centrale de lcran lorsquinstall sur le mur/ Lnea central de la pantalla cuando se instala en la pared

Hole to secure the bracket screw temporarily/ Trou pour fixer la vis du support temporairement/ Orificio para sujetar el tornillo del soporte provisionalmente

KDL-23S2000/23S200A/ 26S2000/26S200A/

KDL-32S2000/32S200A/32S20L1

Tableau des dimensions dinstallation*1

FranaisKDL-23S2000 KDL-26S2000 KDL-32S2000

KDL-23S2000 566 410 90 22 205 0 149 (5 7/8) 145 (5 3/4) 266 (10 1/2)

KDL-23S200A (22 3/8) (17 7/16) (3 13/16) (7/8) (8 3/4) 20 243 (9 5/8) 104 (4 1/8) 298 (11 3/4)

KDL-26S2000 658 470 94 22 265 0 150 (6) 183 (7 1/4) 287 (11 3/8)

KDL-26S200A (26) (18 5/8) (3 3/4) (7/8) (10 1/2) 20 257 (10 1/8) 140 (5 5/8) 316 (12 1/2) KDL-32S2000 792 546 99 19 303 0 155 (6 1/8) 262 (10 3/8) 284 (11 1/4)

KDL-32S20L1 (31 1/4) (21 1/2) (4) (3/4) (12) 20 288 (11 3/8) 213 (8 1/2) 316 (12 1/2)

15.0 kg (33 lb)

(60.0 kg (132 lb 5 oz))

11.0 kg (24 lb 4 oz)

(44.0 kg (97 lb))

8.8 kg (19 lb 6 oz)

(35.2 kg (132 lb 10 oz))

Display Model/ Mounting angle ()/ Modle dcran/ A B C D E Angle de montage ()/ F G H ( 4)*2

Modelo de pantalla ngulo de montaje ()

Display Dimensions/ Unit: mm (inches)/ Length for each mounting angle/ Unit: mm (inches)/ Weight/ Dimensions de lcran Unit : mm (pouces)/ Longueur de chaque angle de montage/ Unit : mm (pouces)/ Poids/ Dimensiones de la pantalla Unidad: mm (pulgadas) Longitud de cada ngulo de montaje Unidad: mm (pulgadas) Peso

KDL-32S200A

tape 1 : Vrification des pices requises pour linstallation

Ouvrez lemballage du support de fixation mural et vrifiez que toutes les pices ncessaires sont prsentes ainsi que les Instructions.

tape 2 : Choix de lemplacement dinstallation

Dcidez de lemplacement o vous voulez installer votre tlviseur. Consulter le verso du prsent manuel pour obtenir les dimensions dinstallation du tlviseur et en dterminer lemplacement. Consulter les instructions relatives au support SU-WL31 sur la faon de dcider de lemplacement de linstallation.

tape 3 : Installation de la plaque sur le mur

Dcidez o vous dsirez installer votre tlviseur. Veuillez vous reporter au Tableau des dimensions dinstallation pour vous aider dterminer le meilleur endroit. Consulter les instructions relatives au support SU-WL31 sur la faon de fixer la plaque au mur.

tape 4 : Prparation de linstallation du tlviseur

Consulter les instructions relatives au support SU-WL31 sur la faon de fixer la plaque au mur.

Fixation du tlviseur au mur Le tlviseur peut tre fix au mur laide du support de fixation mural (vendu sparment). Vrifier la rfrence du modle du tlviseur et sassurer utiliser uniquement le support spcifi pour ce modle. Consulter les tapes de ce dpliant ainsi que le mode demploi accompagnant le support de fixation mural SU-WL31 pour effectuer correctement linstallation.

Une certaine expertise est requise pour installer ce produit, notamment pour dterminer la rsistance du mur par rapport au poids du tlviseur. Sassurer de confier la fixation de ce produit au mur des revendeurs Sony ou des installateurs agrs et dtre particulirement vigilant en matire de scurit au cours de linstallation. Sony ne peut tre tenu responsable de tout dommage ou blessure rsultant dune manipulation ou dune installation incorrecte.

tape 5 : Prparation linstallation du tlviseur

Avant de dtacher le support de table, dbranchez tous les cbles du tlviseur.

1 Faites pivoter la gaine de cbles de 90 degrs et la retirer (A).

2 Retirez les vis et dtachez le support de table du tlviseur (B).

Remarques Dposez lcran lenvers sur une surface stable et de

niveau avec le support de table dpassant lgrement du rebord. Avoir la face de lcran et la base du support sur la mme surface de niveau cre des conditions de travail instables et peut endommager lunit.

Pour viter dendommager la surface de lcran cristaux liquides, placez le tlviseur sur un chiffon doux.

3 Alignez les trous des crochets de montage avec les trous correspondant larrire du tlviseur. Puis fixez-les au tlviseur avec quatre vis (fournies avec le modle SU-WL31) (C).

Remarque Lorsque vous utilisez un tournevis lectrique pour serrer les vis, le couple doit tre denviron 20 kgfocm (2 Nom).

tape 6 : Installation du tlviseur sur la plaque

Consulter les instructions relatives au support SU-WL51 ou SU-PW2 sur la faon de fixer le tlviseur la plaque.

Chiffon doux Support de table

Les vis fournies (+PSW5 . L16)

A B C

Gaine de cbles

Crochets de montage

Espaol

Instalacin del televisor en una pared Puede instalar el televisor en una pared sujetndolo con el soporte de montaje mural (se vende por separado). Compruebe el nmero de modelo del televisor y asegrese de utilizar solamente el soporte especificado para dicho modelo. Consulte los pasos de este folleto, junto con el manual de instrucciones suministrado con el soporte de montaje mural SU- WL31, para realizar la instalacin correctamente.

Se requiere bastante experiencia para instalar este producto, especialmente para determinar la resistencia de la pared para soportar el peso del televisor. Asegrese de contratar la instalacin de este producto a la pared a un distribuidor o contratista autorizado de Sony y de prestar especial atencin a la seguridad durante la instalacin. Sony no se hace responsable de los daos materiales o personales provocados por una manipulacin o instalacin incorrecta.

Paso 1: Comprobar las piezas necesarias para la instalacin

Abra el embalaje del soporte de montaje mural y compruebe que contiene todas las piezas necesarias, junto con el manual de instrucciones.

Paso 2: Cambiar la posicin de las bases de los brazos

Consulte el manual de instrucciones del soporte SU-WL31.

Paso 3: Decidir la ubicacin de instalacin

Decida dnde desea instalar el televisor. Por favor consulte la Tabla de Dimensiones de Instalacin para ayudar a determinar la mejor ubicacin. Consulte el manual de instrucciones del soporte SU-WL31.

Paso 4: Instalar la placa en la pared

Consulte el manual de instrucciones del soporte SU-WL31.

Paso 5: Preparar la instalacin del televisor

Antes de retirar el soporte de sobremesa, desconecte todos los cables del televisor.

1 Gire el sujetacables 90 grados y tire de l hacia fuera (A).

2 Extraiga los tornillos y retire el soporte de sobremesa del televisor (B).

Notas Coloque la pantalla cara abajo sobre una superficie

estable y nivelada, de forma que el soporte de sobremesa sobresalga por el borde de la superficie. Si coloca la pantalla y la base del soporte en una superficie al mismo nivel, las condiciones de trabajo sern inestables y la unidad podra resultar daada.

Para evitar posibles daos en la superficie de la pantalla de cristal lquido, site el televisor sobre un pao suave.

3 Alinee los orificios de los ganchos de montaje con los orificios correspondientes de la parte posterior del televisor. A continuacin, fjelos al televisor mediante los cuatro tornillos (suministrados con el soporte SU-WL31) (C).

Nota Si utiliza un destornillador elctrico para apretar los tornillos, el par de fijacin debe ser de aprox. 2 Nm (20 kgfcm).

Pao suave Soporte de sobremesa

Tornillos suministrados (+PSW5 L16)

A B C

Sujetacables

Ganchos de montaje

Paso 6: Instalar el televisor en la placa

Consulte el manual de instrucciones del soporte SU-WL31.

1 Conecte el cable de alimentacin de ca y el resto de los cables a las tomas correspondientes de la parte posterior del televisor. Para obtener ms informacin sobre la conexin de los cables, consulte el m

Manualsnet FAQs

If you want to find out how the KDL-26S2000 Sony works, you can view and download the Sony KDL-26S2000 Installation Guide v2 on the Manualsnet website.

Yes, we have the Installation Guide for Sony KDL-26S2000 as well as other Sony manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Sony KDL-26S2000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sony KDL-26S2000 Installation Guide v2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sony KDL-26S2000 Installation Guide v2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sony KDL-26S2000 Installation Guide v2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sony KDL-26S2000 Installation Guide v2, simply download the document to your computer. Once downloaded, open the PDF file and print the Sony KDL-26S2000 Installation Guide v2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.