Shimano Ultegra Di2 BT-DN300 Wheel User's Manual PDF

1 of 1
1 of 1

Summary of Content for Shimano Ultegra Di2 BT-DN300 Wheel User's Manual PDF

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice. (English) Aug. 2022 by SHIMANO INC. ITP

UM-7HK0A-002-00 User's Manual

Lithium Ion Battery

User's manuals in other languages are available at : https://si.shimano.com

IMPORTANT NOTICE Contact the place of purchase or a bicycle dealer for information on installation and adjustment

of the products which are not found in the user's manual. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).

Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly before use, and follow it for correct use.

Important Safety Information

For replacement information, contact the place of purchase or a bicycle dealer.

Be sure to observe the following in order to avoid burns or other injury from fluid leakages, overheating, fire or explosions.

DANGER Use the dedicated charger to charge the battery. If any non-specified items are used, fire,

overheating or leakages may occur. Refer to Product Lineup on our website (https://productinfo.shimano.com) for details about compatible battery chargers.

Use an AC adapter with a USB port with a voltage of 5.0 Vdc and with a current equal to or higher than 1.0 Adc. If the one with a current lower than 1.0 A is used, the AC adapter may heat up, potentially causing a fire, smoke, heating, destruction, electric shock, or burns.

Do not heat the battery or throw it into fire. If this is not observed, fire or bursting may occur.

Do not use or leave the battery in hot and humid places such as where the battery is exposed to direct sunlight, in a closed vehicle on a hot day, or near a heater. If this is not observed, leakages, overheating or bursting may cause fire, burns or other injury to occur.

Do not disassemble or modify the battery or apply solder directly to the battery terminals. If this is not observed, leakages, overheating or bursting may cause fire, burns or other injury to occur.

Do not connect the (+) and (-) terminals with metallic objects. Do not carry or store the battery together with metallic objects such as necklaces or hairpins. If this is not observed, short-circuits, overheating, burns or other injury may occur.

If any liquid leaking from the battery gets into the eyes, immediately wash the affected area with clean water without rubbing the eyes, and then seek medical advice. If this is not done, blindness may occur.

WARNING If the battery does not become fully charged after 4 hours of charging, stop charging.

Do not place the battery into fresh water or sea water, and do not allow the battery terminals to get wet. If this is not observed, fire, bursting or overheating may occur.

The operating temperature ranges for the battery are given below. Do not use the battery in temperatures outside these ranges. If the battery is used or stored in temperatures which are outside these ranges, fire, injury or problems with operation may occur.

1. During discharge: 10 C - 50 C 2. During charging: 0 C - 45 C

Do not subject this battery to extremely low air pressure. Doing so may result in an explosion of the battery or the leakage of flammable liquid or gas from it. Transporting this battery by air is not a problem.

Do not use the battery if it has any noticeable scratching or other external damage. If this is not observed, bursting, overheating or problems with operation may occur.

Do not subject the battery to strong shocks or throw it. If this is not observed, bursting, overheating or problems with operation may occur.

Do not use the battery if leakages, discoloration, deformation or any other abnormalities occur. If this is not observed, bursting, overheating or problems with operation may occur.

If any leaked fluid gets on your skin or clothes, wash it off immediately with clean water. The leaked fluid may damage the skin.

After reading the user's manual carefully, keep it in a safe place for later reference.

CAUTION Observe all federal, state and local environmental regulations when disposing of this battery.

Disposal of this battery into fire or a furnace, or mechanically crushing or cutting it can result in an explosion of the battery.

Keep away from children.

Notice

If the unit will not be used for an extended period, store it after charging in cool indoor places (approx. 10 to 20 C) where the battery will not be exposed to direct sunlight or rain.

Also read the user's manual included with the battery charger.

Products are not guaranteed against natural wear and deterioration from normal use and aging.

For maximum performance we highly recommend Shimano lubricants and maintenance products.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Main specifications

Battery Lithium ion

Nominal capacity BT-DN300 : 500 mAh

Weight 51.5 g standard

Operating temperature range

During discharge: 10 C - 50 C During charging: 0 C - 45 C

Nominal voltage 7.4 V

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found with the following items, contact the place of purchase or a bicycle dealer.

Does the battery require charging? Is the battery securely installed to the frame? Are the electric wires installed correctly? Are the dummy plugs correctly attached to any unused E-TUBE ports?

Operation

Connecting the electric wire

Use a dedicated tool to remove the dummy plugs from the E-TUBE port and connect the electric wires.

When using the product, be sure to connect the electric wires to the center E-TUBE port. The product will not operate normally if nothing is connected to the center E-TUBE port.

E-TUBE port

Center E-TUBE port (Always connect the electric wire during use)

Electric wire EW-SD300

Dummy plug

Be sure to attach the dummy plugs to any E-TUBE ports that do not have electric wires connected to them. The product will not operate normally if the dummy plugs are not attached.

Guide to charging time

The charging time of an AC adapter with a USB port is about 1.5 hours, and that of computer USB port type about 3 hours. (Note that the actual time will vary depending on the amount of charge remaining in the battery. Depending on the specifications of the AC adapter, recharging via the AC adapter requires as many hours (about 3 hours) as recharging via PC.) This battery is of lithium ion type. Use the designated charger. For information on how to charge the battery, follow the user's manual included with the charger.

Storing the battery

Dummy plugs are installed at the time of shipment from the factory. Do not remove them except when necessary.

If storing the battery away for a long period, do so with the battery level at 50% or higher, and charge the battery once every six months. Refer to the battery charger user's manual for details about battery levels.

Store the battery or bicycles with the battery installed in cool indoor places (approx. 10 to 20 C) where they do not become exposed to direct sunlight or rain. If the storage temperature is low or high, the performance of the battery is reduced, and its available time will be shorter. When you use the battery after a long storage period, be sure to fully charge it before use.

About system power reset

When the system fails to operate, it may be recovered by resetting the system power.

In some cases, the system can be recovered using E-TUBE PROJECT. Refer to the user's manual for E-TUBE PROJECT for details on this procedure.

If you are unable to recover the system using the E-TUBE PROJECT reset procedures, remove all electric wires and dummy plugs connected to the battery, wait approximately one minute, and then reinsert the electric wires and dummy plugs.

If neither of these procedures recovers the system, contact the place of purchase.

Battery life

The battery is a consumable item. The battery will gradually lose its capacity for charging after repeated use and after time has passed. If the length of time that the battery can be used becomes extremely short, it has probably reached the end of its life, and so you will need to purchase a new battery.

The life of the battery will vary depending on factors such as the storage method, the usage conditions, the surrounding environment and the characteristics of the individual battery pack.

About used batteries

Lithium ion batteries are recyclable, valuable resources. For information on used batteries, contact the place of purchase or a bicycle dealer.

CAUTION Risk of fire and burns. Do not open, crush, heat above 140F(60C) or incinerate. Follow manufacturers Instruction

Manualsnet FAQs

If you want to find out how the Di2 Shimano works, you can view and download the Shimano Ultegra Di2 BT-DN300 Wheel User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Shimano Di2 as well as other Shimano manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Shimano Di2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Shimano Ultegra Di2 BT-DN300 Wheel User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Shimano Ultegra Di2 BT-DN300 Wheel User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Shimano Ultegra Di2 BT-DN300 Wheel User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Shimano Ultegra Di2 BT-DN300 Wheel User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Shimano Ultegra Di2 BT-DN300 Wheel User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.