Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual PDF

1 of 1
1 of 1

Summary of Content for Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual PDF

Wheel Set (for Disc Brake)

IMPORTANT NOTICE

Contact the place of purchase or a distributor for information on

installation, adjustment, and replacement of the products which are not

found in the user's manual. A dealer's manual for professional and

experienced bicycle mechanics is available on our website (https://si.

shimano.com).

For safety, be sure to read this user's manual thoroughly before use, follow it for correct use, and store it so that it can be referenced at any time. The following instructions must be observed at all times in order to

prevent personal injury and physical damage to equipment and

surroundings. The instructions are classified according to the degree of

danger or damage which may occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result

in death or serious injury.

WARNING Failure to follow the instructions could

result in death or serious injury.

CAUTION Failure to follow the instructions could

cause personal injury or physical damage

to equipment and surroundings.

Important safety information

WARNING

Do not disassemble or modify the product. This may cause the product

to not operate correctly, and you may suddenly fall and be seriously

injured.

Check that the wheels are fastened securely before riding the bicycle. Using the axle release lever incorrectly may cause the wheel to fall off, etc. and lead to serious injury due to a fall.

Use the appropriate air pressure indicated on the tire and rim. If the

maximum pressures indicated on the tires and rims differ, be sure not to

exceed the maximum pressure with the lower value. A higher pressure

than indicated can cause a sudden puncture and/or sudden release of

the tire, which can result in serious injury.

WH-R9270-TL / WH-R8170-TL / WH-RS710-TL: Maximum pressure = 7.5

bar / 109 psi / 750 kPa

WH-R9170-TL / WH-RS770-TL: Maximum pressure = 8 bar / 116 psi / 800

kPa

WH-RS370-TL: Maximum pressure = 6.5 bar / 94 psi / 650 kPa

WH-RX870-TL / WH-RX570-TL: Maximum pressure = 5 bar / 72 psi / 500

kPa

Before riding the bicycle, check the wheels to make sure that there are

no bent or loose spokes, dents, scratches or cracks on the rim surface.

Do not use the wheel if any of these problems are found. The wheel

may break, and you may fall. Check also that there is no carbon

separation or cracking.

Do not use the Road Wheel Set on unpaved surfaces. The Road Wheel

Set is designed for paved surfaces. If the wheels are used on unpaved

surfaces, they may become bent or damaged, and accidents may result.

Do not use the gravel/adventure wheel set in harsh conditions such as

on rough roads. Do not use for downhill bicycle riding or freeriding, etc.

otherwise the wheel may become bent or otherwise damaged if it is

subjected to a strong impact, and accidents may occur as a result.

Do not use with rim brakes. These wheels are designed exclusively for

use with disc brakes. Using these wheels with rim brakes could damage

the rims and result in an accident that can lead to a serious injury or

even death.

Confirm that the axle release lever does not

interfere with the disc brake rotor even when it is

fully engaged. The axle release lever may interfere

with the disc brake rotor if it is on the disc brake

rotor side, which is dangerous. If the axle release

lever interferes with the disc brake rotor,

immediately stop use and contact the place of

purchase or a distributor.

Axle release lever

Disc brake rotor

For details on the E-THRU axle, refer to the E-THRU axle user's manual.

The tires should be installed and removed by hand. If this is difficult, a

resin tire lever for tubeless wheels may be used. In such cases, be sure to

check that the rim surface has not been dented, scratched, or cracked as

there is a risk of causing damage to the air seal between the tire and

the rim, which would result in air leakage. Also, check that there is no

carbon separation or cracking, etc. Finally, make sure that there is no air

leakage.

F12 (front 12 mm axle), R12 (rear 12 mm axle) wheel (thru axle)

This wheel can only be used in combination with the special front fork/

frame and the through axle. If it is used in combination with any other

front fork/frame or through axle, it may cause the wheel to become

detached from the bicycle during riding and result in serious bodily

injury.

CAUTION

Note that a higher rim is more easily affected by the wind and makes

riding unstable.

Bed-in period

Disc brakes have a bed-in period, and the braking force will gradually

increase as the bed-in period progresses. Accidents or falls may occur

due to losing control of the bicycle, possibly resulting in serious injury.

The same thing will happen when the brake pads or disc brake rotor

are replaced.

Notice

For the use of the supplied nipple wrench tool, contact your place of

purchase or a distributor for their assistance.

Special nipple wrenches are available as optional accessories.

Do not lubricate the internal parts of the hub. Otherwise, grease will

flow out.

It is recommended that you ask a place of purchase to adjust the spoke

tensions if there is any deviation in the spokes and after the first 1,000

km of riding.

Do not use detergent or other chemicals when wiping the wheel,

otherwise, the sticker on the rim may come off.

Be sure to also read the manual for the disc brakes.

Products are not guaranteed against natural wear and deterioration

from normal use and aging.

For maximum performance we highly recommend SHIMANO lubricants

and maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are

found, consult your place of purchase or a distributor.

Are the spokes broken or loose?

Is the rim surface dented, damaged, or cracked?

Are the wheels secure?

Are there any signs of brake oil leakage?

Do the pads have a thickness of 0.5 mm or more?

Is the disc brake rotor cracked or deformed?

Is it hard to rotate the wheels?

Is abnormal noise emitted from the wheels?

Names of parts

Brake hose

Caliper

Disc brake rotor

Valve hole

Spoke

E-THRU/through axle

Axle release lever Freehub

Front hub Rim surface

Brake hose

Caliper

Disc brake rotor

Brake pad

UM-0AN0A-005 User's Manual

Please note: specifications are subject to change for improvement without notice. (English)

Oct. 2021 by SHIMANO INC. ITP

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG E

Manualsnet FAQs

If you want to find out how the C60 Shimano works, you can view and download the Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Shimano C60 as well as other Shimano manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Shimano C60. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Shimano Ultegra C60 WH-R8170-C60-TL-R Wheel User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.