Contents

Shimano Deore FD-M6025 Front Derailleur Dealer's Manual PDF

1 of 49
1 of 49

Summary of Content for Shimano Deore FD-M6025 Front Derailleur Dealer's Manual PDF

(English) DM-MBFD001-01

Dealer's Manual

ROAD MTB Trekking

City Touring/ Comfort Bike

URBAN SPORT E-BIKE

Front derailleur

SLX FD-M7025 FD-M7020 FD-M7005 FD-M7000

DEORE FD-M6025 FD-M6020 FD-M6000

2

CONTENTS

IMPORTANT NOTICE .............................................................................................. 3

TO ENSURE SAFETY ............................................................................................... 4

LIST OF TOOLS TO BE USED .................................................................................. 7

INSTALLATION ....................................................................................................... 9 Installation of the front derailleur ..............................................................................................................9

Installation of the front derailleur (Front triple) .......................................................................................9

Installation of the front derailleur (Front double) ...................................................................................18

ADJUSTMENT ...................................................................................................... 28 Installing the cable and adjusting shifting operation (Front triple) .......................................................28

Installing the cable and adjusting shifting operation (Front double) ....................................................37

MAINTENANCE .................................................................................................... 47 Replacing the chain catcher ......................................................................................................................47

Replacing rubber pad B .............................................................................................................................48

3

IMPORTANT NOTICE

IMPORTANT NOTICE

This dealers manual is intended primarily for use by professional bicycle mechanics. Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves using the dealers manuals. If any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, contact your place of purchase or a local bicycle dealer for their assistance.

Make sure to read all instruction manuals included with the product.

Do not disassemble or modify the product other than as stated in the information contained in this dealers manual.

All dealers manuals and instruction manuals can be viewed on-line on our website (http://si.shimano.com).

Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a dealer.

For safety, be sure to read this dealers manual thoroughly before use, and follow it for correct use.

The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment and surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.

DANGER

Failure to follow the instructions will result in death or serious injury.

WARNING

Failure to follow the instructions could result in death or serious injury.

CAUTION

Failure to follow the instructions could cause personal injury or physical damage to equipment and surroundings.

4

TO ENSURE SAFETY

TO ENSURE SAFETY

WARNING

Be sure to follow the instructions provided in the manuals when installing the product. It is recommended to use genuine Shimano parts only. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall over, which may cause serious injury. In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious injury.

Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.

After reading the dealers manual thoroughly, keep it in a safe place for later reference.

Be sure to also inform users of the following: Be careful not to let the hemming of your clothes get caught in the chain while riding. Otherwise you may fall off the bicycle.

NOTE

Be sure to also inform users of the following: If gear shifting operations do not feel smooth, wash the derailleur and lubricate all moving parts.

When the chain is in any of the positions shown in the illustration, the chain may come into contact with the front chainring or front derailleur and generate noise. If noise is a problem, shift the chain onto the next largest rear sprocket or the one after if the chain is in the position shown in Figure 1. Shift the chain onto the next smallest sprocket or the one after if it is in the position shown in Figure 2.

Figure 1 Figure 2

Front chainring

Double

(For 10-speed)

Double

(For 11-speed)

Triple

Rear sprocket

5

TO ENSURE SAFETY

For Installation to the Bicycle, and Maintenance: A triple front derailleur cannot be used with a double crankset because the shifting points do not match. Similarly, a double front derailleur cannot be used with a triple crankset.

For frames with suspension, the chainstay angle will vary depending on whether the bicycle is being ridden or not being ridden.

When the bicycle is not being ridden and the chain is positioned on the largest chainring and on the smallest sprocket, the chain guide outer plate of the front derailleur may touch the chain.

Use an outer casing [OT-SP41] and a cable guide (SM-SP17/SP18) for smooth operation.

If the amount of looseness in the links is so great that adjustment is not possible, you should replace the derailleur.

Products are not guaranteed against natural wear and deterioration from normal use and aging.

For maximum performance we highly recommend Shimano lubricants and maintenance products.

The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using the product.

LIST OF TOOLS TO BE USED

7

LIST OF TOOLS TO BE USED

LIST OF TOOLS TO BE USED

The following tools are needed for installation, adjustment, and maintenance purposes.

Tool Tool

2mm hexagon wrench 8mm spanner

4mm hexagon wrench Hexalobular[#10]

INSTALLATION

9 To be continued on next page

INSTALLATION

Installation of the front derailleur

INSTALLATION

Installation of the front derailleur

NOTE

When installing components to a carbon frame/handlebar, check the tightening torque recommended by the carbon frame or component manufacturer to avoid carbon material damage due to excessive tightening or insufficient component holding force resulting from insufficient tightening torque.

Installation on rear suspension types

TECH TIPS

Bicycles with rear suspensions may be positioned differently when a rider is off the bicycle and on the bicycle. By referring to the illustration, perform installation and SIS adjustment while seated on the bicycle.

Installation of the front derailleur (Front triple)

Band type (FD-M7000/FD-M6000)

Side swing

1

(z) (A)

Temporarily attach the clamp bolt.

(z) 4mm hexagon wrench

(A) Clamp bolt

10

INSTALLATION

Installation of the front derailleur (Front triple)

2

[A-B]

(B)

(A)

Align the flat portion of the chain guide outer plate in parallel with the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm.

[A-B] 1 3mm

(A) Chain guide outer plate

(B) Largest chainring

TECH TIPS

Check by holding a hexagon wrench against the flat surface of the largest chainring as shown in the illustration.

When performing a readjustment etc., without a pro-set alignment block, align the flat surface of the largest chainring using the low adjustment bolt.

H L

Low adjustment bolt

2mm hexagon wrench

3 When adjustment is complete, tighten the clamp bolt. Tightening torque

5 - 7 Nm

11 To be continued on next page

INSTALLATION

Installation of the front derailleur (Front triple)

Band type (FD-M7005)

Top swing/Down swing

1 (z) (A)

Temporarily attach the clamp bolt.

(z) 4mm hexagon wrench

(A) Clamp bolt

12

INSTALLATION

Installation of the front derailleur (Front triple)

2

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [B-C] from the tip of the teeth of the largest chainring is 1 to 3mm.

[B-C] 1 3mm

(x) Top swing

(y) Down swing

(z) 2mm hexagon wrench

(A) Low adjustment bolt

(B) Chain guide outer plate

(C) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

TECH TIPS

Check by holding a hexagon wrench against the flat surface of the largest chainring as shown in the illustration.

HL H L

(z) (A)

(z) (A)

(B)

(C)

[B-C]

(y)(x)

3 When adjustment is complete, tighten the clamp bolt. Tightening torque

5 - 7 Nm

13

INSTALLATION

Installation of the front derailleur (Front triple)

Direct mount type (FD-M7000/FD-M6000)

Side swing

1

(z)

Temporarily attach the front derailleur to the frame.

(z) 4mm hexagon wrench

2 [A-B]

(B)

(A)

Align the flat portion of the chain guide outer plate in parallel with the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm.

[A-B] 1 3mm

(A) Chain guide outer plate

(B) Largest chainring

TECH TIPS

When performing a readjustment etc., without a pro-set alignment block, align the flat surface of the largest chainring using the low adjustment bolt.

H L

Low adjustment bolt

2mm hexagon wrench

3 When adjustment is complete, secure the front derailleur to the frame. Tightening torque

5 - 7 Nm

14

INSTALLATION

Installation of the front derailleur (Front triple)

Direct mount type (FD-M7005)

Down swing

1

(z)

Temporarily attach the front derailleur to the frame.

(z) 4mm hexagon wrench

NOTE

Compatible chainrings vary depending on the installation height. Be sure to check the dimensions of the frame.

Installation height

Largest compatible chainring

155.5mm 40T - 42T

159.5mm 42T

2

H L

[A-B]

(z)

(B)

(A)

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

3 When adjustment is complete, secure the front derailleur to the frame. Tightening torque

5 - 7 Nm

15

INSTALLATION

Installation of the front derailleur (Front triple)

Type E (FD-M7000/FD-M6000)

Side swing

1

(A)(B) (C) Install the front derailleur with bottom bracket mount fixing bolts.

(A) Bottom bracket mount fixing bolt

(B) Bottom bracket mount

(C) Bracket

NOTE

Shimano does not provide the bottom bracket mount fixing bolts.

Fixing position

(y)

(z)

Largest chainring

(y) 40T

(z) 42T

2 [A-B]

(B)

(A)

Align the flat portion of the chain guide outer plate in parallel with the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm after installing the front chainwheel. If the clearance does not fall within the range, adjust the fixing position with the elongated hole and fix the fixing bolt again.

[A-B] 1 3mm

(A) Chain guide outer plate

(B) Largest chainring

TECH TIPS

When performing a readjustment etc., without a pro-set alignment block, align the flat surface of the largest chainring using the low adjustment bolt.

H L

Low adjustment bolt

2mm hexagon wrench

16 To be continued on next page

INSTALLATION

Installation of the front derailleur (Front triple)

Type E (FD-M7005)

Top swing

1

(A)(B)

(C)

Secure with bottom bracket mount fixing bolts. Fixing position varies depending on the number of gear teeth used. Refer to the illustration for fixing position.

(A) Bottom bracket mount fixing bolt

(B) Bottom bracket mount

(C) Bracket

NOTE

Shimano does not provide the bottom bracket mount fixing bolts.

(y) (z) Triple: Largest chainring

(y) 40T

(z) 42T

17

INSTALLATION

Installation of the front derailleur (Front triple)

2

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm after installing the front chainwheel. If the clearance does not fall within the range, adjust the fixing position with the elongated hole and fix the fixing bolt again.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

HL

(A)

(B)

[A-B]

(z)

18

INSTALLATION

Installation of the front derailleur (Front double)

Installation of the front derailleur (Front double)

Band type (FD-M7020/FD-M6020)

Side swing

1

(z) (A)

Temporarily attach the clamp bolt.

(z) 4mm hexagon wrench

(A) Clamp bolt

2

H L

[B-C]

(C)

(B)

(A) (z)

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [B-C] from the tip of the teeth of the largest chainring is 1 to 3mm.

[B-C] 1 3mm

(z) 2mm hexagon wrench

(A) Low adjustment bolt

(B) Chain guide outer plate

(C) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

3 When adjustment is complete, tighten the clamp bolt. Tightening torque

5 - 7 Nm

19 To be continued on next page

INSTALLATION

Installation of the front derailleur (Front double)

Band type (FD-M7025/FD-M6025)

Top swing/Down swing

1 (z) (A)

Temporarily attach the clamp bolt.

(z) 4mm hexagon wrench

(A) Clamp bolt

20

INSTALLATION

Installation of the front derailleur (Front double)

2

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [B-C] from the tip of the teeth of the largest chainring is 1 to 3mm.

[B-C] 1 3mm

(x) Top swing

(y) Down swing

(z) 2mm hexagon wrench

(A) Low adjustment bolt

(B) Chain guide outer plate

(C) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

TECH TIPS

Check by holding a hexagon wrench against the flat surface of the largest chainring as shown in the illustration.

HL H L

(B)

(C)

[B-C]

(z) (A)

(z) (A)

(x) (y)

3 When adjustment is complete, tighten the clamp bolt. Tightening torque

5 - 7 Nm

21

INSTALLATION

Installation of the front derailleur (Front double)

Direct mount type (FD-M7020/FD-M6020)

Side swing

1 (y)

(z)

Temporarily attach the front derailleur to the frame.

(y) Installation height

(z) 4mm hexagon wrench

NOTE

Compatible chainrings vary depending on the installation height. Be sure to check the dimensions of the frame.

Installation height

Largest compatible chainring

155.5mm 34T - 38T

159.5mm 36T - 38T

2

H L

[A-B]

(z)

(B)

(A)

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

3 When adjustment is complete, secure the front derailleur to the frame. Tightening torque

5 - 7 Nm

22

INSTALLATION

Installation of the front derailleur (Front double)

Direct mount type (FD-M7025/FD-M6025)

Down swing

1 (y)

(z)

Temporarily attach the front derailleur to the frame.

(y) Installation height

(z) 4mm hexagon wrench

NOTE

Compatible chainrings vary depending on the installation height. Be sure to check the dimensions of the frame.

Installation height

Largest compatible chainring

155.5mm 34T - 38T

159.5mm 36T - 38T

2

H L

[A-B]

(z)

(B)

(A)

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

3 When adjustment is complete, secure the front derailleur to the frame. Tightening torque

5 - 7 Nm

23 To be continued on next page

INSTALLATION

Installation of the front derailleur (Front double)

Type E (FD-M7020/FD-M6020)

Side swing

1

(A)(B) (C) Secure with bottom bracket mount fixing bolts. Fixing position varies depending on the number of gear teeth used. Refer to the illustration for fixing position.

(A) Bottom bracket mount fixing bolt

(B) Bottom bracket mount

(C) Bracket

NOTE

Shimano does not provide the bottom bracket mount fixing bolts.

Fixing position

(x)

(y)

(z)

Largest chainring

(x) 38T

(y) 36T

(z) 34T

24

INSTALLATION

Installation of the front derailleur (Front double)

2

H L

(A)

(B)

[A-B]

(z)

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm after installing the front chainwheel. If the clearance does not fall within the range, adjust the fixing position with the elongated hole and fix the fixing bolt again.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

25 To be continued on next page

INSTALLATION

Installation of the front derailleur (Front double)

Type E (FD-M7025/FD-M6025)

Top swing

1

(A)(B)

(C)

Secure with bottom bracket mount fixing bolts. Fixing position varies depending on the number of gear teeth used. Refer to the illustration for fixing position.

(A) Bottom bracket mount fixing bolt

(B) Bottom bracket mount

(C) Bracket

NOTE

Shimano does not provide the bottom bracket mount fixing bolts.

Fixing position

(x)

(y)

(z)

Double: Largest chainring

(x) 38T

(y) 36T

(z) 34T

26

INSTALLATION

Installation of the front derailleur (Front double)

2

Adjust the low adjustment bolt and align the flat portion of the chain guide outer plate parallel to the flat surface of the largest chainring. Make sure that distance [A-B] from the tip of the teeth of the largest chainring is 1 to 3mm after installing the front chainwheel. If the clearance does not fall within the range, adjust the fixing position with the elongated hole and fix the fixing bolt again.

[A-B] 1 3mm

(z) 2mm hexagon wrench

(A) Chain guide outer plate

(B) Largest chainring

NOTE

Make sure not to position the chain guide as shown in the illustration.

HL

(A)

(B)

[A-B]

(z)

ADJUSTMENT

28 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

ADJUSTMENT

Adjustment procedures differ depending on whether the bicycle features front triples or front doubles. Before making adjustments, check the specifications of the bicycle.

Installing the cable and adjusting shifting operation (Front triple)

Position adjustment of the low side

1

(A) Remove the Pro-Set alignment block. (A) Pro-Set alignment block

2

Adjust the chain position to the smallest chainring and the largest sprocket as shown in the illustration.

(w) Low

(x) Middle

(y) Top

(z) Cable index point

(A) Smallest chainring

(B) Largest sprocket

(z)

(y)(x)(w)

(A)

(B)

29

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

3

H L AB

AB H L

HL

AB

AB

(w)

(x)

(y)

(z) (A)

(z) (A)

(z) (A)

(B)

(C)

[B-C]

Adjust the position of the chain guide with the low adjustment bolt. Adjust the clearance [B-C] between the chain guide inner plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(w) Top swing

(x) Down swing

(y) Side swing

(z) 2mm hexagon wrench

(A) Low adjustment bolt

(B) Chain guide inner plate

(C) Chain

30 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Securing the cable

Side swing (FD-M7000/FD-M6000)

1

(A) (C) (D)(B) Adjust the shifting lever to the low position. Run the cable through the front derailleur. Run the inner cable along the cable guide.

(A) Inner cable

(B) Cable guide

(C) Sealed outer cap

(D) Outer casing

NOTE

Fuzz may be generated when the inner cable is installed or when the coating is damaged during use, but this will not affect its functions.

If the outer casing moves to a large degree, such as in bicycles with suspension, it is recommended that you use an aluminum type sealed outer cap.

Sealed outer cap Sealed outer cap (aluminum type)

2

(A) Pass the inner cable through along the cable guide on the top of the fixing bolt.

(A) Cable guide

NOTE

Be sure to run the inner cable along the cable guide as shown in the illustration.

31

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

3

Fix the inner cable with a cable-fixing bolt.

Tightening torque

6 - 7 Nm

32

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Top swing (FD-M7005) Common to E Type and band type

Down pull

(A)

Use a spanner or a hexagon wrench to tighten the cable-fixing bolt.

(A) 4mm hexagon wrench/8mm spanner

Tightening torque

6 - 7 Nm

NOTE

Run the cable through as shown in the illustration.

Cable-fixing bolt

Top pull

(A)

Use a spanner or a hexagon wrench to tighten the cable-fixing bolt.

(A) 4mm hexagon wrench/8mm spanner

Tightening torque

6 - 7 Nm

NOTE

Run the cable through as shown in the illustration.

Cable-fixing bolt

33

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Down swing (FD-M7005) Band type

(A) (A)

(y) (z)

For down-pull types: Pass the inner cable through the cable guide. For top-pull types: Fix the inner cable with a cable-fixing bolt. A cable guide is not used.

(y) Down pull

(z) Top pull

(A) 4mm hexagon wrench

Tightening torque

6 - 7 Nm

NOTE

Run the cable through as shown in the illustration.

34

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Direct mount type

(A) (A)

(B)

(y) (z)

For down-pull types: Pass the inner cable through the cable guide. For top-pull types: Install the sealed outer cap and fix the inner cable with a cable-fixing bolt. A cable guide is not used.

(y) Down pull

(z) Top pull

(A) 4mm hexagon wrench

(B) Sealed outer cap

Tightening torque

6 - 7 Nm

NOTE

Fuzz may be generated when the inner cable is installed or when the coating is damaged during use, but this will not affect its functions.

If the outer casing moves to a large degree, such as in bicycles with suspension, it is recommended that you use an aluminum type sealed outer cap.

Sealed outer cap Sealed outer cap (aluminum type)

Run the cable through as shown in the illustration.

35

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Adjustment of the cable tension

1

Adjust the chain position to the middle chainring and the largest sprocket as shown in the illustration.

(w) Low

(x) Middle

(y) Top

(z) Cable index point

(A) Middle chainring

(B) Largest sprocket

NOTE

Adjust the lever after operating it from top to middle, not low to middle.

(w) (x) (y)

(z)

(A)

(B)

2

A

A

B

B

(B)

(C)

(A)

[B-C]

Adjust the position with the cable adjuster. Adjust the clearance [B-C] between the chain guide inner plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(A) Cable adjuster

(B) Chain guide inner plate

(C) Chain

TECH TIPS

After adjusting the position with the cable adjuster, operate the lever once and check the clearance again.

36

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front triple)

Top adjustment

1

Adjust the chain position to the largest chainring and the smallest sprocket as shown in the illustration.

(w) Low

(x) Middle

(y) Top

(z) Cable index point

(A) Largest chainring

(B) Smallest sprocket

(w) (x)

(z)

(y)

(A)

(B)

2 AB

H L

HL AB

H L

AB

A B

(B)

(C)

(w)

(x)

(y)

(z) (A)

(z) (A)

(z) (A)

[B-C]

Adjust the position of the chain guide with the top adjustment bolt. Adjust the clearance [B-C] between the chain guide outer plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(w) Top swing

(x) Down swing

(y) Side swing

(z) 2mm hexagon wrench

(A) Top adjustment bolt

(B) Chain

(C) Chain guide outer plate

37

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

Checking gear shifting and minor adjustments

After the cable is installed and adjusted, check the gear-shift by operating the shifting lever. (This also applies if shifting becomes diffi cult during use.) Use the table as a reference when adjusting the bolts. Turn the bolt by 1/8th turn for each adjustment.

If the chain falls to the crank side. Turn the top adjustment bolt clockwise.

If shifting is diffi cult from the middle chainring to the largest

chainring.

Tighten the cable. If this does not improve the situation, turn the

top adjustment bolt counterclockwise.

If shifting is diffi cult from the largest chainring to the middle

chainring. Loosen the cable.

If the chain falls to the bottom bracket side. Turn the low adjustment bolt clockwise.

If the middle chainring is skipped when shifting from the largest

chainring. Tighten the cable.

If shifting is diffi cult from the middle chainring to the smallest

chainring. Turn the low adjustment bolt counterclockwise.

Installing the cable and adjusting shifting operation (Front double)

Note: Number of front chainring positions and lever position

The procedure for operating the shifting lever is as follows.

For double front chainrings

(x) (y)

(v)

(w)

(z)

(A) (B) Use the low and middle positions of the shifter. The top position is not used.

(v) Front chainring position

(w) Shifting lever position

(x) Low

(y) Middle

(z) Top

(A) Smallest chainring

(B) Largest chainring

38 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

Note: Using the mode converter

A

B

(y) (z)

(y) Old

(z) New

TECH TIPS

Mode converter positions on the shifting lever

A

Position adjustment of the low side

1

Adjust the chain position to the smallest chainring and the largest sprocket as shown in the illustration.

(x) Low

(y) Top

(z) Cable index point

(A) Smallest chainring

(B) Largest sprocket

(x)

(z)

(y)

(A)

(B)

39

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

2

H L AB

AB H L

HL

AB

AB

(w)

(x)

(y)

(z) (A)

(z) (A)

(z) (A)

(B)

(C)

[B-C]

Adjust the position of the chain guide with the low adjustment bolt. Adjust the clearance [B-C] between the chain guide inner plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(w) Top swing

(x) Down swing

(y) Side swing

(z) 2mm hexagon wrench

(A) Low adjustment bolt

(B) Chain guide inner plate

(C) Chain

40 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

Securing the cable

Side swing (FD-M7020/FD-M6020)

1

(A) (C) (D)(B) Adjust the shifting lever to the low position. Run the cable through the front derailleur. Run the inner cable along the cable guide.

(A) Inner cable

(B) Cable guide

(C) Sealed outer cap

(D) Outer casing

NOTE

Fuzz may be generated when the inner cable is installed or when the coating is damaged during use, but this will not affect its functions.

If the outer casing moves to a large degree, such as in bicycles with suspension, it is recommended that you use an aluminum type sealed outer cap.

Sealed outer cap Sealed outer cap (aluminum type)

2

(A) Pass the inner cable through along the cable guide on the top of the fixing bolt.

(A) Cable guide

NOTE

Be sure to run the inner cable along the cable guide as shown in the illustration.

41

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

3

Fix the inner cable with a cable-fixing bolt.

Tightening torque

6 - 7 Nm

Top swing (FD-M7025/FD-M6025) Common to E Type and band type

(A)

Use a hexagon wrench to tighten the cable-fixing bolt.

(A) 4mm hexagon wrench

Tightening torque

6 - 7 Nm

Down swing (FD-M7025/FD-M6025) Band type

(A) (A)

(y) (z)

For down-pull types: Pass the inner cable through the cable guide. For top-pull types: Fix the inner cable with a cable-fixing bolt. A cable guide is not used.

(y) Down pull

(z) Top pull

(A) 4mm hexagon wrench

Tightening torque

6 - 7 Nm

NOTE

Run the cable through as shown in the illustration.

42 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

Direct mount type

(A) (A)

(B)

(y) (z)

For down-pull types: Pass the inner cable through the cable guide. For top-pull types: Install the sealed outer cap and pass the inner cable through the cable fixing bolt. A cable guide is not used.

(y) Down pull

(z) Top pull

(A) 4mm hexagon wrench

(B) Sealed outer cap

Tightening torque

6 - 7 Nm

NOTE

Fuzz may be generated when the inner cable is installed or when the coating is damaged during use, but this will not affect its functions.

If the outer casing moves to a large degree, such as in bicycles with suspension, it is recommended that you use an aluminum type sealed outer cap.

Sealed outer cap Sealed outer cap (aluminum type)

Run the cable through as shown in the illustration.

Adjustment of the cable tension

1

Adjust the chain position to the largest chainring and the largest sprocket as shown in the illustration.

(x) Low

(y) Top

(z) Cable index point

(A) Largest chainring

(B) Largest sprocket

(x) (y)

(z)

(A)

(B)

43 To be continued on next page

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

2

A

A

B

B

(B)

(C)

(A)

[B-C]

Adjust the position with the cable adjuster. Adjust the clearance [B-C] between the chain guide inner plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(A) Cable adjuster

(B) Chain guide inner plate

(C) Chain

TECH TIPS

After adjusting the position with the cable adjuster, operate the lever once and check the clearance again.

Top adjustment

1

Adjust the chain position to the largest chainring and the smallest sprocket as shown in the illustration.

(x) Low

(y) Top

(z) Cable index point

(A) Largest chainring

(B) Smallest sprocket

(x) (y)

(z)

(A)

(B)

44

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

2 AB

H L

HL AB

H L

AB

A B

(B)

(C)

(w)

(x)

(y)

(z) (A)

(z) (A)

(z) (A)

[B-C]

Adjust the position of the chain guide with the top adjustment bolt. Adjust the clearance [B-C] between the chain guide outer plate and the chain to be 0 to 0.5mm.

[B-C] 0 0.5mm

(w) Top swing

(x) Down swing

(y) Side swing

(z) 2mm hexagon wrench

(A) Top adjustment bolt

(B) Chain

(C) Chain guide outer plate

45

ADJUSTMENT

Installing the cable and adjusting shifting operation (Front double)

Checking gear shifting and minor adjustments

After the cable is installed and adjusted, check the gear-shift by operating the shifting lever. (This also applies if shifting becomes difficult during use.) Use the table as a reference when adjusting the bolts. Turn the bolt by 1/8th turn for each adjustment.

If the chain falls to the crank side. Turn the top adjustment bolt clockwise.

If shifting is difficult from the smallest chainring to the largest

chainring.

Tighten the cable. If this does not improve the situation, turn the

top adjustment bolt counterclockwise.

If shifting is difficult from the largest chainring to the smallest

chainring. Loosen the cable.

If the chain falls to the bottom bracket side. Tighten the cable. If this does not improve the situation, turn the

low adjustment bolt clockwise.

MAINTENANCE

47

MAINTENANCE

Replacing the chain catcher

MAINTENANCE

Replacing the chain catcher

Depending on the specifications, there are also models without a chain catcher.

Removal

(A)

(B)

Remove the fixing bolt. (A) Hexalobular[#10]

(B) Fixing bolt

Installation

1

(A)

(B)

(C)

Temporarily attach the chain catcher to the chain guide.

(A) Chain guide

(B) Chain catcher

(C) Arm of the chain catcher

2 (A)

Securely attach the arm of the chain catcher as shown in the illustration.

(A) Arm of the chain catcher

NOTE

The shape of the chain catcher may differ depending on the model. Be sure to use a compatible chain catcher.

3

(A)

(B)

(C)

Fix the chain catcher to the chain guide inner plate.

(A) Hexalobular[#10]

(B) Fixing bolt

(C) Chain guide inner plate

Tightening torque

1 - 2 Nm

48

MAINTENANCE

Replacing rubber pad B

Replacing rubber pad B

Removal

(A) Peel back rubber pad B from the reverse side of the chain guide and remove it.

(A) Rubber pad B

Installation

(A) Align the rubber pad B mounting hole of the chain guide with the protrusion of rubber pad B. Push in the protrusion from the reverse side of rubber pad B. Make sure that the protrusion of rubber pad B is securely fitted on the chain guide.

(A) Rubber pad B mounting hole

Please note: specifications are subject to change for improvement without

Manualsnet FAQs

If you want to find out how the Deore Shimano works, you can view and download the Shimano Deore FD-M6025 Front Derailleur Dealer's Manual on the Manualsnet website.

Yes, we have the Dealer's Manual for Shimano Deore as well as other Shimano manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Dealer's Manual should include all the details that are needed to use a Shimano Deore. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Shimano Deore FD-M6025 Front Derailleur Dealer's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Shimano Deore FD-M6025 Front Derailleur Dealer's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Shimano Deore FD-M6025 Front Derailleur Dealer's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Shimano Deore FD-M6025 Front Derailleur Dealer's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Shimano Deore FD-M6025 Front Derailleur Dealer's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.