Contents

Sennheiser UI 770 Instruction Manual PDF

1 of 21
1 of 21

Summary of Content for Sennheiser UI 770 Instruction Manual PDF

UI 770 Universal Interface

Instruction Manual Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark

www.sennheiser.com

Printed in China, Publ. 06/14, A04

CB D

EA

China RoHS

FR ES

N L

D E

EN IT

UI 770 | 1

Contents

Safety instructions ............................................................................ 2 UI 770 universal interface ................................................................ 3 Delivery includes ................................................................................ 4 Putting the UI 770 into operation .................................................. 4

Connection sockets .......................................................................4 Connection possibilities ...............................................................5 Inserting the battery ....................................................................6 Adjusting the UI 770 ....................................................................7 When is the UI 770 ready for operation? .................................9

Using the UI 770 ............................................................................... 10 Switching between the headset and the handset .............. 11 Muting the headset microphone ............................................. 11 Adjusting the sound clarity of the headset speaker ........... 11 Selecting the source PC or telephone ................................. 11 Adjusting the volume of the headset speaker ..................... 12 Using the dictaphone output ................................................... 12

Cleaning the UI 770 ......................................................................... 12 If a problem occurs .......................................................................... 12 Accessories ........................................................................................ 14 Specifications .................................................................................... 14 Manufacturer declarations ............................................................. 15

UI_770_EN.fm Seite 1 Freitag, 15. Januar 2016 11:11 11

Safety instructions

2 | UI 770

Safety instructions Please read this instruction manual carefully and completely

before using the product.

Always include this instruction manual when passing the product on to third parties.

Do not use an obviously defective product.

Preventing damage to health and accidents Do not listen at high volume levels for long periods of time to

prevent hearing damage.

Keep the product, accessories, small parts and packaging parts out of reach of children and pets to prevent accidents and choking hazards.

Do not use the product in situations which require special attention.

Preventing damage to the product and malfunctions Always keep the product dry and do not expose it to extreme

temperatures (hairdryer, heater, extended exposure to sun- light, etc.) to avoid corrosion or deformation.

Only use attachments/accessories supplied or recommended by Sennheiser.

Do not short-circuit the contacts of the product. Make sure that no metal objects (e.g. paper clips, hair pins, earrings) come into contact with the interfaces and contacts.

UI_770_EN.fm Seite 2 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

UI 770 universal interface

UI 770 | 3

Intended use/Liability The universal interface can be used for calling and together with a PC (VoIP) and/or a telephone for audio input/output and is intended for professional office or call center use.

It is considered improper use when this product is used for any application not named in this instruction manual.

Sennheiser does not accept liability for damage arising from abuse or misuse of this product and its attachments/accessories. The risk is to be borne by the user.

Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications.

Sennheiser is not liable for damages resulting from the loss of connection due to flat batteries.

UI 770 universal interface The UI 770 allows you to connect: a standard telephone that supports handsets with a dynamic,

carbon or electret microphone a handset a headset of the Sennheiser Office or Call Center series a PC with a sound card or USB audio adapter (enabling you to

use the headset for VoIP and multimedia applications) a dictaphone for voice recording

With the UI 770, you can then switch between the headset, the handset and the PC, set the volume of the headset speaker and microphone and mute the headset microphone.

UI_770_EN.fm Seite 3 Freitag, 15. Januar 2016 11:11 11

Delivery includes

4 | UI 770

Delivery includes UI 770 1.5 V C-size battery (IEC LR 14) Telephone connecting cable Modular to Easy Disconnect cable Instruction manual

Putting the UI 770 into operation

Connection sockets The connection sockets are located at the front and rear of the UI 770.

1 Headset socket

2 Dictaphone socket for voice recording

3 Handset socket

4 Phone socket for the telephone

5 Aux/PC socket for PC connection

1

2 3

5

4

UI_770_EN.fm Seite 4 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Putting the UI 770 into operation

UI 770 | 5

Connection possibilities An overview of the connection possibilities can be found on the fold-out page.

Connecting the headset to the UI 770

Connecting the dictaphone to the UI 770

Connecting the handset to the UI 770

Peripheral device

Connection on the UI 770

Connection on the peripheral device

A Headset Modular (RJ9) Sennheiser Communications Easy Disconnect

B Dictaphone 3.5 mm jack 3.5 mm jack, cable depends on dictaphone socket

C Handset Modular (RJ9) Modular (RJ9)

D Phone Modular (RJ9) Depending on phone

E Aux/PC Modular (RJ9) 3.5 mm jack

A Connect the modular plug of the adapter cable to the headset socket on the UI 770 until it locks in place.

B Connect the 3.5 mm jack plug of the dictaphone connecting cable to the dictaphone socket on the UI 770 until it locks into place. Connect the 3.5 mm jack plug to your dictaphone.

C Pull the modular plug of the handset cable out of the telephone and connect it to the handset socket on the UI 770 until it locks into place.

UI_770_EN.fm Seite 5 Freitag, 15. Januar 2016 11:11 11

Putting the UI 770 into operation

6 | UI 770

Connecting the telephone to the UI 770

Connecting the PC to the UI 770

Inserting the battery When inserted into the UI 770, the battery has a service life of approx. one year. Under normal use, it is recommended to replace the battery once a year. Remove the lower rear part of the housing. Use the supplied

screw to tamper-proof the battery compartment (which may be mandatory in some countries).

Insert the battery as shown and replace the lower rear part of the housing.

D Connect one of the two modular plugs of the supplied tele- phone connecting cable to the phone socket until it locks into place. Connect the second modular plug to the handset socket on your telephone.

Even with the UI 770 connected, you can use all functions of your telephone as usual. To make a call, lift the handset and dial a phone number. To end a call, replace the handset. The hands- free conversation function can also be used as usual.

E Connect the modular plug of the PC connecting cable to the Aux/PC socket on the UI 770 until it locks into place. Connect the two jack plugs to your PC sound card as shown.

UI_770_EN.fm Seite 6 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Putting the UI 770 into operation

UI 770 | 7

Adjusting the UI 770 Use the switches at the bottom of the housing to adjust the UI 770.

UI 770 Function of the switch/control

1 ABC switch Adjusts a clear dial tone (wiring)

2 Microphone volume control

Adjusts the volume of the headset micro- phone (position 1-9)

3 EU switch Limits the speaker volume (according to the EU Noise Directive 2003/10/EC)

1

3

2

UI_770_EN.fm Seite 7 Freitag, 15. Januar 2016 11:11 11

Putting the UI 770 into operation

8 | UI 770

Adjusting a clear dial tone First make sure that the handset and the headset are con-

nected correctly. The handset must be activated, i.e. the headset/handset button (see page 10) must be in down position. Check if you can hear a dial tone in the handset.

Press the headset/handset button to activate the headset. Check if you can hear a dial tone in the headset. Otherwise, set the ABC switch to the positions A, B and C one after the other. In each position, check if you can hear a dial tone.

Adjusting the volume of the headset microphone The microphone volume control on the UI 770 allows you to adjust the volume of the headset microphone: a soft voice is slightly amplified and a loud voice is attenuated. Adjust the telephone to a medium volume level.

Turn the microphone volume control to position 1.

Make a call and speak into the microphone with a normal voice. Slowly turn the microphone volume control until the other party can hear you.

Limiting the speaker volume The EU switch on the UI 770 allows you to limit the speaker volume of the headset to comply with EU Directive 2003/10/EC. To limit the speaker volume, move the EU switch from position

square to triangle.

UI_770_EN.fm Seite 8 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Putting the UI 770 into operation

UI 770 | 9

* The time-weighted average value is based on a breakdown of a typical working day and measured as the sound pressure level with a B&K HATS (Head And Torso Simulator).

** EU Directive 2003/10/EC on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (noise).

When is the UI 770 ready for operation? The UI 770 is ready for operation as soon as: the battery is inserted it is connected and adjusted to your telephone

If you disconnect the UI 770 from the telephone, it is immediately put out of operation.

The UI 770 universal interface is a special version featuring a reduced output level. Even with the volume of the UI 770 set to the maximum, the signal transmitted by the connected Sennheiser Communications headset will never exceed the maximum of 85 dB(A) per day as a time-weighted average* value, which is in compliance with the EU Noise Directive**.

UI_770_EN.fm Seite 9 Freitag, 15. Januar 2016 11:11 11

Using the UI 770

10 | UI 770

Using the UI 770

1 PC/telephone button

2 Mute button

3 Headset/handset button

4 Sound clarity button

5 Volume control

2

1

3

4

5

Headset/handset

PC interface Sound clarity

Communication through PC/Active

Not active/default

Mute/Active

Not active/default

Handset/Active

Headset/default

Sound clarity/Active

Not active/default

Mute

UI_770_EN.fm Seite 10 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Using the UI 770

UI 770 | 11

Switching between the headset and the handset Press the headset/handset button to switch between the

headset and the handset. Button down: Handset is activated Button up: Headset is activated

Muting the headset microphone Press the mute button to mute the headset microphone.

Button down: Microphone is muted Button up: Microphone is activated

Adjusting the sound clarity of the headset speaker With the UI 770, you can adjust the sound clarity of the headset speaker. Annoying background noise coming through the headset speaker is filtered out and speech intelligibility is thus enhanced. Press the sound clarity button to filter out annoying back-

ground noise. Button down: Speech intelligibility enhancement is activated Button up: Speech intelligibility enhancement is

deactivated

Selecting the source PC or telephone Press the PC/telephone button to select the source PC or

telephone. Button down: PC is selected as the source Button up: Telephone is selected as the source

If the PC is selected as the source, the mute button and volume control are deactivated. Consequently, you cannot mute the headset microphone or adjust the volume of the headset speaker using the UI 770 but you have to adjust the volume via your PC.

UI_770_EN.fm Seite 11 Freitag, 15. Januar 2016 11:11 11

Cleaning the UI 770

12 | UI 770

Adjusting the volume of the headset speaker Use the volume control to continuously adjust the volume of

the headset speaker.

Dynamic Volume Control ensures that the volume set via the volume control is kept constant, even if the other party speaks with varying volumes.

Using the dictaphone output The dictaphone output can be used to record a conversation in both directions.

Cleaning the UI 770 Only use a soft and, if necessary, slightly damp cloth for cleaning the UI 770. Do not use any solvents or cleansing agents as these can damage the varnish of the UI 770.

If a problem occurs Problem What to do

No dial tone Make sure that the headset/handset button is in up position.

Make sure that the handset is lifted.

Make sure that the cables are connected correctly.

Make sure that the UI 770 is correctly adjusted to your telephone.

Adjustment to your telephone is not possible

Your telephone does not meet standard requirements. Please contact your dealer.

UI_770_EN.fm Seite 12 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

If a problem occurs

UI 770 | 13

If the problem persists, please contact your local Sennheiser Communications agent for assistance. Never repair or attempt to repair the units as this will invalidate the warranty.

The other party cannot hear you

Make sure that the mute button is in up position.

No connection to the PC

Make sure that the cables are connected correctly.

Increase the volume on your PC.

Your PC and the UI 770 are not compatibel. Please contact your dealer.

Your voice can hardly be heard

Make sure that the headset microphone is positioned at the corner of your mouth.

Make sure that the volume of the headset microphone is sufficient.

Make sure that the UI 770 is correctly adjusted to your telephone.

The speaker volume varies

Your telephone does not meet standard requirements. Please contact your dealer.

The battery may be low. Replace the battery

For possible solutions to problems, please refer to the FAQ on our website at www.sennheiser.com > Products > Universal Interface.

Problem What to do

UI_770_EN.fm Seite 13 Freitag, 15. Januar 2016 11:11 11

Accessories

14 | UI 770

Accessories

Specifications

Accessories Cat. No.

Headset holder 3in1 (headset holder desktop mounting plate - desktop lock plate) 502392

Cable (modular to 2x 3.5 mm jack plug) for connection of UI to PC via standard sound card existing CUIPC 1

05373

Cable (modular to USB plug) for connection of UI to PC directly via USB port 502394

Cable (3.5 mm jack plug to 3.5 mm jack plug) for connection of UI to dictaphone device (PC, PDA, tape recorder etc.)

502391

Cable (modular to modular) for connection of UI to desk phone CPHUI 1 502392

Cable (modular to Easy Disconnect) for connection of UI to headset CSTD 01 standard bottom cable

05373

Dimensions [mm] 91 x 32 x 101

Weight approx. 137 g approx. 205 g with battery

Battery 1.5 V C-size battery (IEC LR 14)

UI_770_EN.fm Seite 14 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Manufacturer declarations

UI 770 | 15

Manufacturer declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.

Australian warranty Sennheisers goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any liability of Sennheiser which is imposed by law, or limits or modifies any remedy available to the consumer which is granted by law.

To make a claim under this warranty, contact

Sennheiser Australia Pty Ltd, Unit 3, 31 Gibbes Street Chatswood NSW 2067, AUSTRALIA

Phone: (02) 9910 6700, email: service@sennheiser.com.au.

All expenses of claiming the warranty will be borne by the person making the claim.

The Sennheiser International Warranty is provided by Sennheiser Australia Pty Ltd (ABN 68 165 388 312), Unit 3, 31 Gibbes Street Chatswood NSW 2067 Australia.

UI_770_EN.fm Seite 15 Freitag, 15. Januar 2016 11:11 11

Manufacturer declarations

16 | UI 770

In compliance with the following requirements WEEE Directive (2012/19/EU)

Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recy- cling center for such equipment.

The supplied standard batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer. In order to protect the environment, only dispose of exhausted batteries.

In compliance with:

CE Conformity EMC Directive (2014/30/EU) RoHS Directive (2011/65/EU)

The declaration is available at www.sennheiser.com. Before putting the product into operation, please observe the respective country-specific regulations!

USA

Canada ICES-003 Class B

Europe

Australia/ New Zealand

China

Korea

15 B (B )

, .

(Certification No) KCC-REM-SC9-UI770

(Product name) Universal Interface box

(Model)

UI 770

(Applicant) Sennheiser Communications A/S

(Manufacturer) Sennheiser Comunications A/S

(Country of Origin) China

UI_770_EN.fm Seite 16 Freitag, 15. Januar 2016 11:11 11

FR ES

N L

D E

EN IT

Manufacturer declarations

UI 770 | 17

Trademarks Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG.

Other product and company names mentioned in this instruction manual may be the trademarks or registered trademarks of their respective owners.

Statements regarding FCC and Industry Canada

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

SENNHEISER Model No:

FCC Declaration of Conformity (DoC)

We, Sennheiser Electronic Corporation One Enterprise Drive Old Lyme CT 06371 USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759

declare the above device comply with the requirements of Federal Communications Commission.

This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Greg Beebe

UI 770

UI_770_EN.fm Seite 17 Freitag, 15. Januar 2016 11:11 11

Manufacturer declarations

18 | UI 770

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for

help.

Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC autho- rization to operate this equipment.

This class B digital apparatus complies with the Canadian ICES-003.

This device complies with Part 15 subpart b of the FCC Rules and NMB 003 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

UI_770_EN.fm Seite 18 Freitag, 15. Januar 2016 11:11 11

UI 770 Universal Interface

Manualsnet FAQs

If you want to find out how the UI 770 Sennheiser works, you can view and download the Sennheiser UI 770 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sennheiser UI 770 as well as other Sennheiser manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sennheiser UI 770. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sennheiser UI 770 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sennheiser UI 770 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sennheiser UI 770 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sennheiser UI 770 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sennheiser UI 770 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.