- Manuals
- Brands
- Sennheiser
- Soundbar
- AMBEO Soundbar
- Instruction Manual
Sennheiser AMBEO Soundbar SB01 Instruction Manual PDF
Summary of Content for Sennheiser AMBEO Soundbar SB01 Instruction Manual PDF
AMBEO Soundbar SB01
Instruction manual
Use the search function, the navigation (left) or the following links: Start Product overview Getting started Installing the AMBEO Soundbar Connecting devices to the AMBEO Soundbar Putting the AMBEO Soundbar into operation Using the AMBEO Soundbar Using the AMBEO Soundbar Maintaining the AMBEO Soundbar Specifications
Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark Germany www.sennheiser.com
Version: 03/20 A02
This instruction manual contains all information on the current firmware version. Firmware updates can be downloaded free of charge from the Internet (> 51).
Important safety instructions
2 | AMBEO Soundbar
Important safety instructions
1. Read these safety instructions.
2. Keep these safety instructions. Always include these safety instructions when passing the product on to others.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the product near water.
6. Only clean the product when it is not connected to the power sup- ply system. Clean only with a dry cloth.
7. Ensure circulating ventilation. The product generates heat which is dissipated through the housing. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, stoves, or other products that produce heat and do not expose to direct sun- light.
9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power supply cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the product.
11. Use only attachments/accessories/spare parts supplied or rec- ommended by Sennheiser.
12. Use only with shelves, racks, or tables that can safely support the weight of the product (see instruction manual).
13. Unplug the product during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, when the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire and electric shock, do not expose the product to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the prod- uct.
16. To completely disconnect this product from the AC mains, dis- connect the power supply cord plug from the AC receptacle.
17. The plug of the power supply cord shall remain readily accessible.
Important safety instructions
AMBEO Soundbar | 3
Hazard warnings on the bottom of the product The product generates heat which is dissipated through the housing! Do not touch when in use or directly after use!
The following label is attached to the bottom of the product.
The symbols on this label have the following meaning: Read and follow the safety and operating instructions contained in this instruction manual.
Presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock.
Never open the product. There is a risk of electric shock when touching live parts. There are no user serviceable parts inside the product. Refer repairs to an authorized Sennheiser service partner.
Safety instructions for lithium batteries (remote control)
WARNING If abused or misused, the batteries may leak. In extreme cases, they may even present a risk of: explosion, fire development, heat generation, smoke or gas development.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Keep away from children.
Observe correct polarity.
Immediately remove the batteries from obviously defective product.
Dispose of batteries at special collection points or return them to your specialist dealer.
Do not mutilate or dismantle.
Do not expose to moisture.
Important safety instructions
4 | AMBEO Soundbar
Preventing damage to health and accidents
Protect your hearing from high volume levels. Permanent hearing damage may occur when listening at high volume levels for long periods of time.
The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and other implants. Always maintain a dis- tance of at least 3.94"/10 cm between the product component containing the magnet and the cardiac pacemaker, implanted defibrillator, or other implant.
Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents. Swallowing and chok- ing hazard.
Do not use the product in an environment that requires your spe- cial attention (e.g. when performing skilled jobs).
Preventing damage to the product and malfunctions If the product was moved from a cold environment to a warm one,
allow the product to stand for at least 2 hours before putting it into operation.
Intended use/Liability This product has been designed for playing TV sound and music via cable connections, Bluetooth, WiFi or Ethernet. This product is intended for private domestic use only. It is not intended for commer- cial use. It is considered improper use when this product is used for any appli- cation not named in the instruction manual. Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser does not accept liability for damage aris- ing from improper use or misuse of this product and its attach- ments/accessories.
Remove the batteries if the product will not be used for extended periods of time.
Pack/store batteries so that the terminals cannot contact each other danger of shorting out/fire hazard.
Only use batteries specified by Sennheiser.
Store the products in a cool and dry place at room temperature (approx. 20 C/68 F).
Do not continue to use defective batteries.
Do not heat above 70 C/158 F, e.g. do not expose to sunlight or throw into a fire.
Important safety instructions
AMBEO Soundbar | 5
Before putting the product into operation, please observe the respective country-specific regulations.
Notes on data collection and processing and on firmware updates This product stores individual settings such as volume, sound and UI settings (e.g. LED brightness), selected input and designations, Bluetooth addresses of paired devices, WiFi settings and usage data (e.g. power-on cycles and operating times). This data is required for the operation of the product and is not transferred to Sennheiser or companies commissioned by Sennheiser and is not processed. You can update the firmware of the product for free via an Internet connection. If the product is connected to the Internet, the following data is automatically transferred to and processed by Sennheiser servers in order to provide and transfer suitable firmware updates: MAC address, IP address. The data will only be used as specified and will not be stored permanently. If you do not want this data to be transferred and processed, do not connect to the Internet.
Notes on the packaging We recommend using the original packaging to ensure safe storage and transport of the Soundbar. Damage during transport is often caused by the use of unsuitable packaging. The original packaging of the Soundbar provides optimal protection and minimizes the risk of damage during transport.
Package contents
6 | AMBEO Soundbar
Package contents
Online you can find: this detailed instruction manual and additional information
(www.sennheiser.com/download) the Sennheiser Smart Control app for configuring the AMBEO
Soundbar and for additional functions (www.sennheiser.com/smartcontrol)
Optional accessories
SB01 AMBEO Soundbar
Power cable, country-specific
High Speed HDMI Cable, length approx. 1 m
SB01-RC remote control (incl. 1x CR2032 battery)
SB01-MS microphone for room calibration with microphone holder, cable length approx. 5 m
Quick guide
Safety guide
SB01-WM wall mount for the AMBEO Soundbar, bracket for wall mounting (article no.: 508612)
You can find a list of accessories on the AMBEO Soundbar product page at www.sennheiser.com or contact your local Sennheiser partner: www.sennheiser.com > Service & Support.
Product overview
AMBEO Soundbar | 7
Product overview
SB01 AMBEO Soundbar Front
Control panel
MUTE button
Volume button - (volume down)
Volume button + (volume up)
AMBEO button for activating AMBEO (pressing for 4 seconds activates the room calibration)
Multi-function button for controlling the media playback
Bluetooth pairing (by simultaneously pressing the multi-function button and the input source button for 2 seconds)
SOURCE button (input source selection)
NFC antenna
On/off button
Vibration absorbing feet
Input for room calibration microphone
OLED display with matt, scratch-resistant surface
Status LED
AMBEO display
76 8 94 5321
0 A C 0 DB
Product overview
8 | AMBEO Soundbar
Back
Bottom
Connections
Cooling vents
IEC mains socket POWER 100 - 240 V~, 50/60 Hz, 250 W
USB input (for updates only) type B, USB 5 V, 1 A
Ethernet input RJ45, ETHERNET
HDMI output HDMI TV (eARC) OUT 5 V, 1 A
HDMI input HDMI 1 IN
HDMI input HDMI 2 IN
HDMI input HDMI 3 IN
S/PDIF input, optical, OPT IN
Output for connecting a subwoofer with power amplifier RCA socket SW PRE OUT
RCA input sockets for an analog audio source AUX IN
Mounting thread (under the rubber foot) for the SB01-WM wall mount (optional accessory)
Type plate
0 0E
5 V
1
A
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
F G H JI M N OK L
6 TR S
QP
Product overview
AMBEO Soundbar | 9
SB01-RC remote control
Cable tie for bundling and strain-relieving the connected cables
RESET button
SETUP button for WiFi setup (WiFi Protected Setup; WPS)
Infrared transmitting diode
On/off button
AMBEO button for activating AMBEO (pressing for 4 seconds activates the room calibration)
Multi-function button
Volume buttons
Sound profile button
Night mode button
Battery compartment (for 1x CR2032 battery)
Input source button
Mute button
NEWS SPORTS
NEUTRAL NIGHT
MUSICMOVIE
VOLSOURCE
U V
W
\
[
X_
Y
Z
]
Product overview
10 | AMBEO Soundbar
SB01-MS microphone for room calibration
Overview of the displays Status LED
Microphone head, omni-directional pick-up pattern
Microphone holder
Cable with 2.5 mm jack plug
a
b c
Color Status Meaning
white lights up 1x Status change e.g. volume adjustment,
sound profile selection pulses Booting, connecting via Chromecast
blue lights up Connected via Bluetooth yellow Connecting via Bluetooth
yellow pulses Update is being loaded and installed
flashes WiFi lost (check router settings, restart router if necessary)
orange lights up
Reset is terminated WPS found
pulses Reset in progress WPS search
red lights up Soundbar in standby mode
Product overview
AMBEO Soundbar | 11
AMBEO display
The brightness of the AMBEO display and the OLED display can be adjusted via the Smart Control app.
Messages on the display
AMBEO display Meaning lights up white AMBEO mode is on off AMBEO mode is off pulses white Room calibration in progress
Message on the display
Meaning/possible errors Possible solution
TV Speakers On
The Soundbar mutes itself when the TV speakers are selected as the audio output.
In the TV settings, select the Soundbar as the audio output (HDMI ARC Audio Output).
OVER HEAT Overheating of the Soundbar
Switch the Soundbar off and let it cool down (> 35).
DOLBY Pass- Through
Selected function (e.g. sound profile or AMBEO mode) cannot be activated because the Dolby Virtualizer is activated.
Deactivate the Dolby Virtualizer in the Smart Control app (> 47).
Product overview
12 | AMBEO Soundbar
Network Off
The Soundbar is in standby mode and all network connections are switched off (including remote con- trol). Standby power consumption is mini- mized (> 36).
Switch the Soundbar off via the normal standby mode (> 35).
Please contact Service
The Soundbar has detected a serious error. Operation is not possible.
Disconnect the Sound- bar from the power supply system (> 30). Contact your local Sennheiser partner: www.sennheiser.com > Service & Support.
Message on the display
Meaning/possible errors Possible solution
Getting started
AMBEO Soundbar | 13
Getting started
1. Setting up the Soundbar
The correct placement and setup of the AMBEO Soundbar is import- ant for an optimum sound experience. You can place the AMBEO Soundbar on a piece of furniture (> 16) or mount it directly to a wall using the wall mount (optional accessory) (> 19).
2. Connecting a TV and/or audio devices
Connect your TV to the Soundbar. You can also connect other audio/ video devices (> 20) or play wireless audio via Bluetooth or WiFi (> 41).
3. Connecting the AMBEO Soundbar to the
Getting started
14 | AMBEO Soundbar
power supply system
Connect the AMBEO Soundbar to the power supply system - the AMBEO Soundbar comes to life and guides you through the initial switch-on process (> 30).
4. Starting the room calibration
For an optimum spatial sound experience, the AMBEO Soundbar must perform a room calibration. Connect the microphone for the room calibration and start the calibration. The calibration takes only a few minutes and leads to the best possible 3D spatial sound (> 31).
Getting started
AMBEO Soundbar | 15
5. Installing the Google Home app on your smartphone
The Google Home app allows you to configure the WiFi settings of the AMBEO Soundbar. Via the Internet connection/WiFi, you receive the latest firmware updates for the AMBEO Soundbar and you can use the Chromecast built-in functionality. In the Google Home app, follow the setup process for the AMBEO Soundbar.
6. Installing the Smart Control app on your smartphone
The Sennheiser Smart Control app allows you to use all functions and settings of the AMBEO Soundbar and to e.g. adjust the sound to your liking using the equalizer (> 43).
Installing the AMBEO Soundbar
16 | AMBEO Soundbar
Installing the AMBEO Soundbar
Placing the Soundbar on the device feet
With the help of a second person, take the Soundbar out of the packaging.
Remove the protective foil.
Remove the protective foil from the OLED display.
With the help of a second person, place the Soundbar on a sturdy, level, horizontal piece of furniture that can safely carry the weight of the Soundbar (approx. 18.5 kg).
Observe the following: The distance X of the Soundbar to the side walls should ideally
be the same so that the Soundbar is centered in the room. The optimum distance between the Soundbar and the walls is between 1 and 5 meters.
There must be no objects that block the sound or have a strong sound-absorbing effect (e.g. furniture such as shelves or arm- chairs, room dividers, curtains, flower pots) between the Soundbar and the side walls and the ceiling of the room.
The distance X of the Soundbar to the ceiling should be between 1 to 5 meters, but should not exceed 5 meters. The ceil- ing should be flat and horizontal (no pitched roof or domed roof).
The Soundbar should be positioned below the TV.
CAUTION Material damage due to overheating Inadequate ventilation may cause the Soundbar to overheat. Do not place any objects on the Soundbar, keep the minimum
clearances and ensure circulating ventilation.
CAUTION Risk of staining of furniture surfaces! Varnish or furniture polish may degrade the feet of the product, which could stain your furniture. Do not place the product on delicate surfaces; if necessary, use a
non-slip pad under the product.
Installing the AMBEO Soundbar
AMBEO Soundbar | 17
The distance of the Soundbar to the TV should be at least 10 cm. The seat (optimal point sweet spot) should be positioned cen-
trally in front of the Soundbar and have a distance of at least 2 meters to the Soundbar.
Ensure circulating ventilation. The product generates heat which is dissipated through the housing. Do not touch when in use or directly after use!
X X
X
2 m
18.5 kg
>10 cm
Installing the AMBEO Soundbar
18 | AMBEO Soundbar
Optimum positioning Schematic structure of the sound waves from the Soundbar, which are reflected by walls and objects and thus reach the optimal point (sweet spot). Thus, a virtual surround sound can be created with a Soundbar.
Object Meaning
Reflecting surface
TV
Soundbar
Furniture/curtain
Optimal point sweet spot
30
15 m
2 m
20
Installing the AMBEO Soundbar
AMBEO Soundbar | 19
Mounting the Soundbar to a wall To mount the Soundbar to a wall, you require the SB01-WM wall mount (optional accessory, > 6).
Proceed as described in the mounting instructions (enclosed with the SB01-WM wall mount) and use the drilling template.
Sound waves of the loudspeakers
Sound waves from the top-firing loudspeakers to the ceiling
When positioning the Soundbar, keep in mind that the sound is reflected by the walls and ceiling. Many curtains, thick carpets and other rough surfaces can affect the 3D spatial sound.
Object Meaning
Connecting devices to the AMBEO Soundbar
20 | AMBEO Soundbar
Connecting devices to the AMBEO Soundbar Put a protective material (e.g. the foam parts of the packaging or
a blanket) between the piece of furniture and the Soundbar.
Carefully turn the Soundbar on its front.
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 21
Connection diagram (example) Connect your audio sources to the AMBEO Soundbar and your TV according to the following diagram (example). Sennheiser recom- mends connecting the audio sources for high-resolution surround formats directly to the AMBEO Soundbar using a High Speed HDMI Cable.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
HDMI IN eARC or ARC
OPTICAL OUT
Streaming device e.g. Apple TV, Netix, ...
Gaming console e.g. PS4, Xbox, ...
CD
Gaming console e.g. Wii, ...
Blu-ray
Connect additional devices to the HDMI IN of your TV. The audio will be routed to the AMBEO Soundbar via the HDMI eARC/ARC or OPTICAL connection.
If no eARC/ARC is available, use the OPTICAL connection of the TV (for audio) and HDMI IN (for video)
High-denition audio content
Auto/Bypass/Pass-Through Downmix/Stereo
TV/Player sound menu*: HDMI Audio OUT/Optical OUT
Sound settings
* sound menu can vary
Sound settings
Sound settings
In case of more than 3 audio sources:
Stereo audio content
TV connection via HDMI eARC or HDMI ARC (for audio and video)
Connecting devices to the AMBEO Soundbar
22 | AMBEO Soundbar
Preparation Adjust the sound settings on the TV and on the audio/video device.
On your devices, adjust the sound settings for the HDMI and opti- cal output from Downmix/Stereo to Auto/Bypass/Pass- Through. (The menu of the devices may use different names depending on the manufacturer). This ensures that the audio signals for 3D spatial sound from the source (e.g. TV) are passed on to the AMBEO Soundbar.
On your TV, set the Soundbar as the audio output.
Auto/Bypass/Pass-Through
Downmix/Stereo
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 23
Connecting a TV Connection to the HDMI eARC socket (recommended) Required cable: High-speed HDMI cable (supplied)
To connect the Soundbar to a TV with an HDMI IN socket labeled ARC/eARC:
Connect one connector of the supplied high-speed HDMI cable to the HDMI TV (eARC) OUT socket on the Soundbar.
Connect the other connector of the cable to the HDMI (eARC) IN socket of your TV.
Please note the settings of your devices, > 22.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER HDMI IN
High Speed HDMI Cable *
*
eARC
Auto/Bypass/Pass-Through Downmix/Stereo
TV/Player sound menu*: HDMI Audio OUT/Optical OUT
Video signal Audio signal
TV sets with an ARC output (not eARC) can transmit sur- round formats only to a limited extent.
* *
Connecting devices to the AMBEO Soundbar
24 | AMBEO Soundbar
Connection without HDMI eARC socket Required cable: optical cable (recommended length: max. 5 m)
To connect the Soundbar to a TV without an HDMI IN socket labeled ARC/eARC:
Connect one connector of an optical cable (to be ordered sepa- rately) to the OPT IN socket on the Soundbar.
Connect the other connector of the cable to the OPTICAL OUT socket of your TV.
Please note the settings of your devices, > 22.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
HDMI IN OPTICAL OUT
Auto/Bypass/Pass-Through Downmix/Stereo
TV/Player sound menu*: HDMI Audio OUT/Optical OUT
*
Audio signal
*
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 25
Connecting an audio/video device Digital connection Required cable: HDMI
To connect the Soundbar to an audio source (e.g. Blu Ray player, DVD player):
Connect one connector of an HDMI cable (to be ordered sepa- rately) to one of the three HDMI sockets (HDMI 1 IN, HDMI 2 IN, HDMI 3 IN) on the Soundbar.
Connect the other connector of the cable to the HDMI OUT socket of your audio source.
Please note the settings of your devices, > 22.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
HDMI OUT
Blu-ray player, DVD player, cable or satellite receiver
Auto/Bypass/Pass-Through Downmix/Stereo
TV/Player sound menu*: HDMI Audio OUT/Optical OUT
*
*
Video signal Audio signal
* *
Connecting devices to the AMBEO Soundbar
26 | AMBEO Soundbar
Analog connection Required cable: stereo RCA cable
To connect the Soundbar to a TV or an audio source (e.g. CD player):
Connect the red connector of an RCA cable (to be ordered sepa- rately) to the red AUX IN socket and the white connector of the same cable end to the white AUX IN socket on the Soundbar.
Connect the other red connector of the cable to the red socket and the white connector of the same cable end to the white socket of the TV or audio source.
L AUDIO
R
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
e.g. CD player
L AUDIO
R OR
*
*
Audio signal
*
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 27
Connecting a subwoofer (optional) Optionally, you can connect a subwoofer to the Soundbar.
Recommended settings: Adjust the volume on the subwoofer to approx. 50% and set the crossover to Max.
Connect one connector of the mono RCA cable (to be ordered separately) to the SW PRE OUT socket on the Soundbar.
Connect the other connector of the cable to the socket LOW LEVEL IN/MONO of the subwoofer.
Calibrate the Soundbar (> 31).
Disconnecting the subwoofer When the subwoofer is disconnected from the Soundbar, the Sound- bar will use the previous calibration without subwoofer, if one exists.
The app allows you to choose between the calibration with and with- out subwoofer.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
LOW LEVEL IN/MONO
2
1
3
Volume: 50 % Crossover: Max
Connecting devices to the AMBEO Soundbar
28 | AMBEO Soundbar
Connecting an Ethernet cable To connect the Soundbar to a wired network:
Connect one connector of a network cable (with RJ-45 connector, to be ordered separately) to the ETHERNET socket on the Sound- bar.
Connect the other connector of the cable to the network socket of your router. You may have to make settings to your router.
Alternatively, the Soundbar can be connected to the Internet via WiFi. For more information, > 43.
LANA U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER Router
If you connect the Soundbar to the Internet/Ethernet via cable, the WiFi function of the Soundbar is automatically deactivated.
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 29
Using the cable tie To achieve strain relief on the sockets of the Soundbar:
Bundle the cables.
Place the cables in the cable tie and tighten it.
Close the cable tie.
Using the USB socket for updates If the Soundbar is not connected to the Internet, you can install a firmware update on the Soundbar using a USB flash drive. For more information on the update, > 51. A power supply of 5 V , 1 A for accessories (external devices) is pos- sible.
Insert a USB flash drive or external accessory powered by USB (type B, to be ordered separately) into the USB socket on the Soundbar.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
Putting the AMBEO Soundbar into operation
30 | AMBEO Soundbar
Putting the AMBEO Soundbar into operation
Preparing the SB01-RC remote control To remove the transport protection of the battery:
Use a suitable object (e.g. a coin) to open the battery compart- ment cover (located on the bottom side of the remote control) by turning one turn counter-clockwise.
Remove the plastic strip.
Close the battery compartment cover by turning one turn clock- wise.
Connecting/disconnecting the Soundbar to/from the power supply system
Connecting the Soundbar to the power supply system Connect the plug of the power cable to the POWER socket on the
Soundbar.
Connect the power plug of the power cable to a suitable wall socket.
CAUTION Danger of damage to the product! If you connect to an unsuitable power supply, the product can be damaged.
Use a suitable power cable to connect the product to the power supply system (100 - 240 V~, 50/60 Hz).
Putting the AMBEO Soundbar into operation
AMBEO Soundbar | 31
Disconnecting the Soundbar from the power supply system Unplug the power plug of the power cable from the wall socket.
Unplug the plug of the power cable from the POWER socket on the Soundbar.
Starting the room calibration The room calibration is necessary for the measurement of the room in order to let you get the optimum spatial sound experience. Therefore, the room calibration should be performed when the Soundbar is put into operation for the first time in a room, the position of the Soundbar has been changed, a subwoofer has been connected or disconnected, the room has been changed (e.g. furniture has been moved).
Preparations for calibration Connect the Soundbar to the power supply system (> 30).
The Soundbar switches on. This process takes about 15 seconds. The status LED pulses white.
Press the on/off button on the top of the Soundbar or the on/off button on the remote control. The display shows Hello and the prompt Set up microphone.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
If the Dolby Virtualizer is activated, you cannot perform a room calibration. If necessary, deactivate the Dolby Virtual- izer in the Smart Control app (> 47).
Hello!
15s 1x
Press On/Off
Putting the AMBEO Soundbar into operation
32 | AMBEO Soundbar
Calibrating the Soundbar Straighten up the microphone in the microphone holder.
Place the microphone with the microphone holder on the seat in front of the Soundbar. The microphone head should be located approximately at ear height during normal use.
Connect the jack plug of the microphone cable to the microphone input on the Soundbar.
Press the AMBEO button on the top of the Soundbar or the AMBEO button on the remote control. The display shows Please step to the side.
Please note that the test tones are played at a high volume during calibration.
Avoid disturbing noises (open windows, household appliances, etc.) and do not stay between the Soundbar and the microphone as this can falsify the calibration. The display shows a countdown for the start of the calibration Calibration starts in 10 / 9 / .... The calibration process takes several minutes. The display shows Done! and Press AMBEO to finalize.
Press the AMBEO button on the top of the Soundbar or the AMBEO button on the remote control. The display shows Welcome. The AMBEO demo sound is played (approx. 10 seconds).
Disconnect the jack plug of the microphone cable from the micro- phone input on the Soundbar.
21 3
Putting the AMBEO Soundbar into operation
AMBEO Soundbar | 33
Error messages during room calibration
Canceling the calibration
To cancel the calibration: Press the volume buttons (volume down) and + (volume up) for 4 seconds.
Repeating the calibration If you want to repeat the calibration, you have the following options: Press the AMBEO button on the Soundbar for 4 seconds. Press the AMBEO button on the remote control for 4 seconds.
Press AMBEOPlease step t
Calibration s
Calibration
Processing
Done!
Welcome
Press AMBEO
1x
1x
Press AMBEO
Press AMBEO to nalizePlease step to the side
Calibration starts in 10 / 9 / ..
Press AMBEO to start callibration
Press AMBEO
4
OR
5 6
Message on the display Possible error Possible solution Calibration failed. Please press AMBEO to cancel.
Subwoofer volume is too low
Increase the volume of the subwoofer and restart the calibration
Microphone is not connected
Connect the microphone
Ambient noise is too high Reduce ambient noise Not enough sound- reflecting surfaces in the room
Change the position of the microphone in the room
General error An error has occurred, restart the calibration
4s
Hold
Putting the AMBEO Soundbar into operation
34 | AMBEO Soundbar
Use the Smart Control app.
The app provides more detailed calibration options and an overview of the status of the calibration.
Using the AMBEO Soundbar
AMBEO Soundbar | 35
Using the AMBEO Soundbar
Switching the AMBEO Soundbar on
If you want to switch the Soundbar on, you have the following options: Press the on/off button on the Soundbar. Press the on/off button on the remote control. Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HDMI CEC). Use the Smart Control app.
If you want to switch the Soundbar on from standby mode without network connection (> 36): Press the on/off button on the Soundbar for 1 second.
Switching the AMBEO Soundbar off (standby mode) If you want to switch the Soundbar off (standby mode), you have the following options: Press the on/off button on the Soundbar. Press the on/off button on the remote control. Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HDMI CEC). Use the Smart Control app.
The Soundbar is in standby mode. The status LED lights up red. Any existing network connection is retained so that the Soundbar can be switched on automatically via the network or HDMI sig- nals.
You can put the Soundbar in standby mode and switch off all network connections, > 36.
To completely disconnect the Soundbar from the power supply sys- tem, > 30.
WARNING Danger of hearing damage due to high volume levels! Listening at high volume levels can lead to permanent hearing defects.
Adjust the volume to a low level before selecting a source.
Do not continuously expose yourself to high volume levels.
If the Soundbar is inactive for 20 minutes (default setting), it automatically switches to standby mode (> 37).
Using the AMBEO Soundbar
36 | AMBEO Soundbar
Switching the AMBEO Soundbar off (standby mode without network connection) You can switch the Soundbar off (standby mode) and also switch off all network connections. Please note that without network connec- tions, Chromecast and Bluetooth playback is not possible, the Soundbar does not switch on automatically when HDMI signals are input and no automatic firmware updates can be installed. Operation via the remote control or the Smart Control app is also not possible. On the Soundbar, simultaneously press the on/off button and the
volume button - (volume down) for 1 second. The Soundbar is in standby mode. The network connections are disconnected (WiFi, HDMI, Ethernet). The status LED goes off. The display shows Network Off permanently.
To switch off the display of Network Off: Press the multi-function button for 1 second.
The display goes off.
ECO standby mode The Soundbar has an ECO standby mode. You can set the mode via the Smart Control app. Booting the Soundbar takes longer when ECO standby mode is activated. ECO standby mode is activated: Booting takes approx. 20 sec-
onds. The power consumption of the Soundbar is approx. 1.9 W (activated upon delivery).
ECO standby mode is deactivated: Booting takes approx. 1 sec- onds. The power consumption of the Soundbar is approx. 5.5 W.
If you have activated the standby mode without network con- nection and the Soundbar switches to auto standby after normal operation (> 37), the standby mode without network connection is activated again.
Network Off
1s
Hold
Using the AMBEO Soundbar
AMBEO Soundbar | 37
Auto standby If there is no playback for 20 minutes, the Soundbar automatically switches to standby mode. No playback: Bluetooth or Chromecast input is paused Bluetooth or Chromecast connection is disconnected Analog, optical or HDMI input: no playback available Auto standby always activates the standby mode that was last used (standby or standby without network connections).
The time after which the Soundbar switches to auto standby can be adjusted via the Smart Control app.
Selecting the input source
In addition to the ECO standby mode, you can switch off the Soundbar and at the same time switch off all network connec- tions (> 36). In this mode, power consumption is minimal, but the Soundbar must then be switched on on the device itself.
When playback is muted (MUTE), auto standby is not active.
WARNING Danger of hearing damage due to high volume levels! Listening at high volume levels can lead to permanent hear- ing defects. Adjust the volume to a low level before selecting a
source. Do not continuously expose yourself to high volume lev-
els.
Using the AMBEO Soundbar
38 | AMBEO Soundbar
If you want to change the input source, you have the following options: Press the SOURCE button on the Soundbar. Press the SOURCE button on the remote control. Use the Smart Control app.
Source selection: HDMI TV HDMI 1 HDMI 2 HDMI 3 AUX Optical Bluetooth Streaming:
Casting Spotify Casting TuneIn Casting Soundcloud
Media
The sources Streaming (e.g. Chromecast) and Media can not be selected via the input source buttons. The Soundbar automatically switches to the source when playback is started from the corre- sponding app. If the connection is disconnected, the Soundbar jumps to the previ- ous source.
The name of the source can be changed via the Smart Control app. The new name can consist of up to 9 characters (A-Z, a-z and 0-9).
Adjusting the volume
If you want to adjust the volume of the Soundbar, you have the fol- lowing options:
WARNING Danger of hearing damage due to high volume levels! Listening at high volume levels can lead to permanent hear- ing defects. Adjust the volume to a low level before selecting a source. Do not continuously expose yourself to high volume lev-
els.
Using the AMBEO Soundbar
AMBEO Soundbar | 39
Press the volume button (volume down) or + (volume up) on the Soundbar.
Press the volume buttons on the remote control. Press the volume button on the TV remote control (if the TV is
connected to the Soundbar via HDMI CEC). Use the Smart Control app. Use your connected Bluetooth device to adjust the volume.
The volume can be adjusted from 0 - 50.
If the volume is adjusted to 0, the mute function is activated (> 40).
Using the AMBEO Soundbar
40 | AMBEO Soundbar
Activating/deactivating the mute function If you want to activate the mute function, you have the following options: Press the MUTE button on the Soundbar. Press the MUTE button on the remote control. Press the mute button on the TV remote control (if the TV is con-
nected to the Soundbar via HDMI CEC). Use the Smart Control app. Adjust the volume to 0.
If you want to deactivate the mute function, you have the following options: Increase the volume (> 38). Press one of the mute buttons again.
The mute function remains activated when the input source is changed. The mute function deactivates the auto standby function (> 37).
Using the AMBEO Soundbar
AMBEO Soundbar | 41
Using the AMBEO Soundbar
Connecting the AMBEO Soundbar to a Bluetooth/NFC device Information on the Bluetooth wireless connection The Soundbar is compatible with the Bluetooth standard 4.2. If your audio source supports one of the following high-resolution audio encoding methods, music is automatically played in high audio quality: AAC. Otherwise the Soundbar will play your music in normal audio quality (SBC). When selecting the Bluetooth input or when switching on with the last used input Bluetooth, the Soundbar automatically tries to con- nect to the last used Bluetooth device. The Soundbar can save the connection profiles of up to eight Blue- tooth devices with which it has been paired. If you pair the Soundbar with the ninth Bluetooth device, the saved connection profile of the least used Bluetooth device will be over- written. If you want to re-establish a connection with the overwritten Bluetooth device, you have to pair the earphones again. If a device is connected, you first have to disconnect it to connect a new device. You can use the Near Field Communication (NFC) function for easy pairing of the devices.
Pairing the AMBEO Soundbar with a Bluetooth device Activate Bluetooth on your Bluetooth device.
Press the multi-function button and the SOURCE button for 2 sec- onds. The status LED pulses blue. The Soundbar is in pairing mode.
Hold your Bluetooth device at a distance of approx. 20 cm to the Soundbar.
Via the menu of your Bluetooth device, start the search for new Bluetooth devices. All active Bluetooth devices in the proximity of your smartphone are displayed.
paired + connected
paired
Using the AMBEO Soundbar
42 | AMBEO Soundbar
From the list of found Bluetooth devices, select AMBEO Sound- bar. If necessary, enter the default pin code 0000. If pairing was successful, the status LED lights up blue.
The device name of the Soundbar can be changed in the Chromecast app (e.g. Soundbar family room).
Disconnecting the AMBEO Soundbar from a Bluetooth device Via the menu of your Bluetooth device, disconnect the connection
to the Soundbar. The Soundbar is disconnected from the Bluetooth device. The display shows Disconnected. The status LED goes off.
Pairing the AMBEO Soundbar with an NFC device (NFC pairing) Activate Bluetooth and NFC on your Bluetooth device.
Place your NFC device close (distance < 3 cm) to the NFC antenna on the Soundbar. The status LED pulses blue. The devices are being paired. If pairing was successful, the status LED lights up blue.
If no connection is established within 3 minutes, pairing mode is terminated. If necessary, start the pairing mode again.
ON 2s
Hold
< 20 cm
Pairing
Connected Stans iPhone
ON
ON
< 3 cm
Pairing
Connected Stans iPhone
Using the AMBEO Soundbar
AMBEO Soundbar | 43
Disconnecting the AMBEO Soundbar from an NFC device Place your paired NFC device close (distance < 3 cm) to the NFC
antenna on the Soundbar. The Soundbar is disconnected from the NFC device. The display shows Disconnected. The status LED goes off.
Installing the Smart Control app To control the Soundbar using a smartphone, Bluetooth Low Energy (Bluetooth LE, at least version 4.2) is required.
To make full use of all the settings and functions of the AMBEO Soundbar, you need to have the free Sennheiser Smart Control app installed on your smartphone. Download the app from the Apple App Store or from Google Play and install it on your smartphone. Alternatively, you can visit the follow- ing website: http://www.sennheiser.com/smartcontrol
Start the Smart Control app.
Follow the instructions in the app.
Press the multi-function button and the SOURCE button for 2 sec- onds to accept the Bluetooth Low Energy connection. The Smart Control app recognizes the Soundbar and activates all available settings and functions.
Network connection via WiFi or Ethernet Use the WiFi connection or the Ethernet connection for: Chromecast UPnP (Universal Plug and Play) Updates
Using Chromecast To use Chromecast:
Download the Google Home app.
Start the setup in the app.
2s
Hold
Using the AMBEO Soundbar
44 | AMBEO Soundbar
Establishing a WiFi connection To establish a WiFi connection:
Press the SETUP button for approx. 2 seconds to activate WPS (WiFi Protected Setup). The Soundbar searches for a connection. The display shows WPS searching and the status LED flashes orange.
Press the WPS button on your router. The Soundbar connects to the WiFi. The display shows WiFi connected for 4 seconds and the status LED lights up orange.
The Soundbar must be on the same network as the devices the Soundbar wants to communicate with.
The WiFi connection can be set up via the Google Home app and managed via the Smart Control app.
Establishing an Ethernet network connection Make sure that the Ethernet cable is properly connected to the
Soundbar and your network (> 28).
The Ethernet connection can be set up via the Google Home app and managed via the Smart Control app.
Controlling music playback You can control music playback by pressing the multi-function button on the Soundbar or the multi-function button on the remote control. The function is available for playback via Bluetooth or net- work connection.
Functions of the multi-function button Press the multi-function button.
If no connection is established within 2 minutes, the search is terminated.
If you connect the Soundbar to the Internet/Ethernet via cable, the WiFi function of the Soundbar is automatically deactivated.
Using the AMBEO Soundbar
AMBEO Soundbar | 45
Using the sound profiles If you want to activate a sound profile, you have the following options: Press the sound profile buttons on the remote control. Use the Smart Control app.
There are the following sound profiles: Movie Music News Sports Neutral
Adjusting the AMBEO modes If you want to activate an AMBEO mode, you have the following options: Press the AMBEO button on the Soundbar. Press the AMBEO button on the remote control. Use the Smart Control app.
The AMBEO display lights up.
Order of modes Off AMBEO Light AMBEO Standard AMBEO Boost
The preset mode for all inputs is AMBEO Standard.
The modes Light, Standard and Boost can be adjusted in the app and assigned to the sound profiles (> 45).
Multi-function button Result Press 1x Plays or pauses music
Press 2x Plays the next track in the playlist
Press 3x Plays the previous track in the playlist
If the Dolby Virtualizer is activated, you cannot use the sound profiles (> 47).
Using the AMBEO Soundbar
46 | AMBEO Soundbar
Using the night mode NIGHT To activate the night mode:
Press the night mode button on the remote control. When the night mode is activated, the display shows an icon in front of the name of the sound profile. The bass is compressed (reduced).
The night mode can be applied to all sound profiles and modes, except AMBEO Boost.
Adjusting the equalizer To be able to use the equalizer, you require the Smart Control app (> 43).
Adjust the equalizer via the Smart control app. The settings are stored in the Soundbar. These settings are active even without using the Smart Control app, i.e. when you are using another Bluetooth device for music playback.
Parameters: 4-band EQ split into
Foundation Low-Mid Clarity Brillance
Adjustment range + 10 dB to -10 dB
The app allows you to make additional acoustical settings in addition to the equalizer settings.
If the Dolby Virtualizer is activated, you cannot use the AMBEO modes (> 47).
Movie
If the Dolby Virtualizer is activated, you cannot use the equal- izer (> 47).
Using the AMBEO Soundbar
AMBEO Soundbar | 47
Using the Dolby DRC You can use the Dolby DRC (Dynamic Range Compression) to play back Dolby audio content. This function compresses the dynamics of the audio signal, thus changing differences from soft to loud passages. The Dolby DRC function can be activated/deactivated in the codec settings of the Smart Control app. Off: no change, full dynamics Auto: automatic reduction of dynamics; changes in volume can
be perceived during playback Normal: slight compression of dynamics Heavy: heavy compression of dynamics
Using the Dolby Dialog Normalizer You can use the Dolby Dialog Normalizer to play back Dolby audio content. This function makes dialogs easier to understand by reduc- ing loud music/background noise and amplifying softer dialog audio. The Dolby Dialog Normalizer can be activated/deactivated in the codec settings of the Smart Control app.
Using the Dolby Virtualizer You can use the Dolby Virtualizer to play back Dolby audio content. This function plays back Dolby audio content unchanged. The Dolby Virtualizer can be activated/deactivated in the codec settings of the Smart Control app. If the Dolby Virtualizer is activated, you can no longer use the fol- lowing functions/settings: Sound profiles AMBEO modes Equalizer Room calibration data (the measured room data is not used for
Dolby audio content)
Adjusting the brightness of the display and the AMBEO display The brightness of the display and the AMBEO display can be adjusted via the Smart Control app.
There are three brightness levels: low brightness high brightness
Using the AMBEO Soundbar
48 | AMBEO Soundbar
automatic brightness (activated upon delivery)
If automatic brightness is selected, the display and the AMBEO dis- play automatically adjust to the ambient brightness.
The brightness of the display and the AMBEO display can also be adjusted independently of each other via the app.
Sound feedback The beep tones can be switched off via the app.
Transporting the AMBEO Soundbar
Use the original packaging to transport the Soundbar.
To transport the Soundbar:
Switch the Soundbar off (> 35).
Disconnect the Soundbar from the power supply system (> 30).
Disconnect all other cables and connections from the Soundbar (> 20).
With the help of a second person, place the Soundbar, the acces- sories and the foam parts in the original packaging as shown.
ATTENTION Material damage due to improper transport! Incorrect packing of the Soundbar may cause damage to the Sound- bar during transport. Only transport the Soundbar in the original packaging with its
protective foam parts.
Using the AMBEO Soundbar
AMBEO Soundbar | 49
Close the packaging.
Close the packaging so that it does not open during transport.
The Soundbar in its packaging must be carried by at least two people.
Quick Guide, Safety Guide
Maintaining the AMBEO Soundbar
50 | AMBEO Soundbar
Maintaining the AMBEO Soundbar
Cleaning the Soundbar
Clean the product only with a soft, dry cloth.
The fabric of the Soundbar cannot be removed.
Clean the fabric with a soft brush.
Replacing the battery of the remote control If the range of the remote control decreases, you have to replace the battery.
Use a suitable object (e.g. a coin) to open the battery compart- ment cover by turning one turn counter-clockwise.
Remove the used battery. In order to protect the environment, dis- pose of used batteries at special collection points or return them to your specialist dealer.
Insert the new battery (type CR2032, 3 V) into the battery com- partment. Observe correct polarity when inserting the battery.
Close the battery compartment cover by turning one turn clock- wise.
ATTENTION Liquids can damage the electronics of the product! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids far away from the product. Do not use any solvents or cleansing agents.
CAUTION Danger of accidents! Misuse or swallowing of batteries can cause injuries and health problems. Observe the safety instructions for lithium batteries (>
3). Keep batteries away from children.
Maintaining the AMBEO Soundbar
AMBEO Soundbar | 51
Installing firmware updates Firmware updates are available free of charge and serve to enhance product improvement and also function extension.
You can update the Soundbar's firmware via a USB flash drive or using the Sennheiser Smart Control app.
Update via the Smart Control app To update the firmware via the Smart Control app, the Soundbar must be connected to the Internet via WiFi or Ethernet (> 43).
Start the Smart Control app on your smartphone.
The app provides information on available firmware updates and guides you through the installation process.
Update via a USB flash drive Required USB flash drive: Memory size: 1 GB File system: FAT
Download the update file with the file name image.swu from the website www.sennheiser.com/download and save it on a USB flash drive.
Do not change the file name!
Switch the Soundbar on.
Connect the USB flash drive to the USB socket on the Soundbar.
Maintaining the AMBEO Soundbar
52 | AMBEO Soundbar
Press the SETUP button for 5 seconds. The display shows Updating and the status LED pulses yellow.
The Soundbar restarts several times during the update. The process can take up to 8 minutes.
A U
X IN
SW P
R E
O U
T
O PT
IN
H D
M I 3
IN
H D
M I 2
IN
H D
M I 1
IN
H D
M I T
V
(e A
R C
) O U
T
ET H
ER N
ET
U SB
PO W
ER
5 V
1
A
5s
Hold
Maintaining the AMBEO Soundbar
AMBEO Soundbar | 53
Resetting the Soundbar Switch the Soundbar on. If you want to reset the Soundbar, you have the following options: Insert a paper clip into the RESET recess on the bottom side of the
Soundbar and press the paper clip for 2 seconds. Use the Smart Control app.
Action Display Status LED Reset in progress RESET pulses orange Reset terminated RESET OK lights up orange
Specifications
54 | AMBEO Soundbar
Specifications SB01 AMBEO Soundbar
Number of channels 5.1.4
Amplifier class D
Total audio power 250 W (RMS) 500 W (peak)
Total number of speakers 13
Low and mid-range speakers
quantity: 6 10 cm/4 inches cellulose sandwich cones
Tweeters quantity: 5 (sideways: right and left, front: right, center and left) 2.5 cm/1 inch aluminum cones
Top-firing broadband speakers
quantity: 2 9 cm/3.5 inches cellulose sandwich cones
Frequency response 30 Hz to 20 kHz (-3 dB)
Audio processors Dual Core 1.2 GHz ARM Cortex-A7 processor
2 x Dual Core 500 MHz SHARC DSP
Display graphic OLED with brightness sensor, status LED, AMBEO LED
Power plug county-specific
Voltage range 100 240 V~ 50/60 Hz
Power consumption 250 W
Standby power consumption
ECO standby activated: 1.9 W ECO standby deactivated: 5.5 W standby without network connection: < 1 W
Temperature range operation: 0 C to +45 C storage: -20 C to +70 C
Relative humidity (non condensing)
operation: 20 to 85 % storage: 10 to 95 %
Dimensions (W x H x D) approx. 126.5 x 13.5 x 17.1 cm incl. feet approx. 126.5 x 12.5 x 17.1 cm without feet
Weight approx. 18.5 kg
Magnetic field strength 9 mT
Specifications
AMBEO Soundbar | 55
Inputs/outputs
SB01-RC remote control
WiFi
HDMI TV (eARC) OUT default: HDMI 2.0a, eARC (HDMI 2.1) control: CEC video formats: up to 4K (60 Hz), Full HD, MHL 2.1 encoding: HDCP 1.4 power supply for accessories (external devices): 5 V , 1 A
HDMI 1 IN HDMI 2 IN HDMI 3 IN
default: HDMI 2.0a encoding: HDCP 2.2 control: CEC video formats: up to 4K (60 Hz), Full HD, MHL 2.1 HDR formats: Dolby Vision Pass- Through
OPT IN S/PDIF supported sampling rates: up to 192 kHz
AUX IN stereo RCA sockets
USB USB socket (type A), for power supply for accessories (external devices): 5 V , 1 A; service socket for updates
ETHERNET RJ-45 socket, 100/10 MBit
Subwoofer SW Pre-OUT mono RCA, max. 2 V
Microphone input for room calibration
2.5 mm jack socket, mono
Transmission infra-red
Range approx. 8 m
Power supply coin cell, type CR2032, 3 V
Standard IEEE 802.11 a/b/g/n/ac
Transmission system 2 x 2 MIMO
Transmission frequency (country-specific)
2,400 MHz to 2,483.5 MHz 5,170 MHz to 5,835 MHz
Modulation 2.4 GHz band CCK, DQPSK, DBPSK fr DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM
Modulation 5 GHz band 64QAM, 16QAM, QPSK, BPSK
Output power 100 mW (max)
Specifications
56 | AMBEO Soundbar
Bluetooth
Network streaming
Playable audio formats
Version 4.2, class 1, BR/EDR, BLE
Transmission frequency 2,400 MHz to 2,483.5 MHz
Modulation GFSK, /4 DQPSK, 8DPSK
Profiles A2DP, AVRCP, GATT
Output power 10 mW (max)
Codec AAC, SBC
Pairing option Near Field Communication (NFC)
Network Ethernet WiFi
Services Chromecast built-in uPnP
Audio format/codec File extension
MP3 .mp3
AAC/HE-AAC
.m4a
.aac
.mp4
.3gp
LPCM .wav
FLAC .flac
AIFF .aiff .aif
ALAC .m4a
Vorbis .ogg
Specifications
AMBEO Soundbar | 57
Supported audio formats/surround formats
* not all streaming services support the playback of all codecs ** TV sets with an ARC output can transmit surround formats only to a limited extent
Format Audio source via:
HDMI, HDMI eARC, network streaming*
HDMI ARC** OPTICAL
LPCM 2 Channel yes yes
LPCM 5.1 Channel yes yes
LPCM 7.1 Channel yes yes
Dolby Digital yes yes yes
Dolby Digital Plus yes yes yes
Dolby True HD yes
Dolby Atmos - Dolby TrueHD yes
Dolby Atmos - Dolby Digital Plus yes yes yes
DTS yes yes yes
DTS-ES Discrete 6.1, DTS-ES Matrix 6.1
yes yes yes
DTS 96/24 yes yes yes
DTS-HD High Resolution Audio yes
DTS-HD Master Audion yes
DTS-HD LBR yes
DTS:X yes
MPEG-H (Fraunhofer) yes yes
Manufacturer Declarations
58 | AMBEO Soundbar
Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
In compliance with the following requirements
EU declaration of conformity ErP Directive (2009/125/EC) RoHS Directive (2011/65/EU) Hereby, Sennheiser electronic GmbH & Co. KG declares that the radio equipment type SB01 is in compliance with the Radio Equip- ment Directive (2014/53/EU). The full text of the EU declaration of conformity is available at the fol- lowing Internet address: www.sennheiser.com/download.
Notes on disposal Battery Directive (2006/66/EC & 2013/56/EU) WEEE Directive (2012/19/EU) The symbol of the crossed-out wheeled bin on the product, the bat- tery/rechargeable battery (if applicable) and/or the packaging indi- cates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their operational lifetime. For packaging disposal, please observe the legal regulations on waste segregation applicable in your country. Further information on the recycling of theses products can be obtained from your municipal administration, from the municipal col- lection points, or from your Sennheiser partner. The separate collection of waste electrical and electronic equip- ment, batteries/rechargeable batteries (if applicable) and packag- ings is used to promote the reuse and recycling and to prevent neg- ative effects caused by e.g. potentially hazardous substances contained in these products. Herewith you make an important con- tribution to the protection of the environment and public health.
Trademarks and licenses Sennheiser is a registered trade mark of Sennheiser electronic GmbH & Co. KG. Other product and company names mentioned in the user documen- tation may be the trademarks or registered trademarks of their respective holders. Licenses are available at: www.sennheiser.com/download.
Manufacturer Declarations
AMBEO Soundbar | 59
This product includes software developed by the University of Cali- fornia, Berkeley and its contributors. App Store is a service mark of Apple Inc. Android, Google play, Google play logo, Google Chromecast and Google Home are trademarks of Google Inc. The AAC logo is a trademark of Dolby Laboratories. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennhe- iser electronic GmbH & Co. KG is under license. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Manufactured under license from Dolby laboratories. Dolby, Dolby Atmos, Dolby Vision and the Double-D symbol are trademarks of Dolby laboratories. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved. This product is made under license to certain US patents and/or foreign counterparts. The MPEG-H TV Audio system logo is a trademark of Fraunhofer IIS in Germany and other countries. This system incorporates High-Definition Multimedia Interface (HDMI) technology. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo, are trademarks or registered trademarks of HDMI Licensing, LLC in the USA and other countries.
Appendix
60 | AMBEO Soundbar
Appendix
Open Source license terms and conditions The AMBEO Soundbar SB01 has a user interface to call up additional license terms and conditions for the open source software used. You can open the license terms and conditions on your computer or a mobile device in an Internet browser. This requires that the com- puter/mobile device is connected to the WiFi of the Soundbar (AMBEO Soundbar [serial number]).
Open an Internet
Related manuals for Sennheiser AMBEO Soundbar SB01 Instruction Manual
Manualsnet FAQs
If you want to find out how the AMBEO Soundbar Sennheiser works, you can view and download the Sennheiser AMBEO Soundbar SB01 Instruction Manual on the Manualsnet website.
Yes, we have the Instruction Manual for Sennheiser AMBEO Soundbar as well as other Sennheiser manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Instruction Manual should include all the details that are needed to use a Sennheiser AMBEO Soundbar. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Sennheiser AMBEO Soundbar SB01 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Sennheiser AMBEO Soundbar SB01 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Sennheiser AMBEO Soundbar SB01 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Sennheiser AMBEO Soundbar SB01 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sennheiser AMBEO Soundbar SB01 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.